1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ARM_VERSATILE 12 tristate "ARM Versatile panel driver" 13 depends on OF 14 depends on MFD_SYSCON 15 select VIDEOMODE_HELPERS 16 help 17 This driver supports the ARM Versatile panels connected to ARM 18 reference designs. The panel is detected using special registers 19 in the Versatile family syscon registers. 20 21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 22 tristate "ASUS Z00T TM5P5 NT35596 panel" 23 depends on GPIOLIB && OF 24 depends on DRM_MIPI_DSI 25 depends on BACKLIGHT_CLASS_DEVICE 26 help 27 Say Y here if you want to enable support for the ASUS TMP5P5 28 NT35596 1080x1920 video mode panel as found in some Asus 29 Zenfone 2 Laser Z00T devices. 30 31config DRM_PANEL_BOE_HIMAX8279D 32 tristate "Boe Himax8279d panel" 33 depends on OF 34 depends on DRM_MIPI_DSI 35 depends on BACKLIGHT_CLASS_DEVICE 36 help 37 Say Y here if you want to enable support for Boe Himax8279d 38 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 39 24 bit RGB per pixel. It provides a MIPI DSI interface to 40 the host and has a built-in LED backlight. 41 42config DRM_PANEL_BOE_TV101WUM_NL6 43 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 44 depends on OF 45 depends on DRM_MIPI_DSI 46 depends on BACKLIGHT_CLASS_DEVICE 47 help 48 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 49 45NA WUXGA PANEL DSI Video Mode panel 50 51config DRM_PANEL_LVDS 52 tristate "Generic LVDS panel driver" 53 depends on OF 54 depends on BACKLIGHT_CLASS_DEVICE 55 select VIDEOMODE_HELPERS 56 help 57 This driver supports LVDS panels that don't require device-specific 58 handling of power supplies or control signals. It implements automatic 59 backlight handling if the panel is attached to a backlight controller. 60 61config DRM_PANEL_SIMPLE 62 tristate "support for simple panels" 63 depends on OF 64 depends on BACKLIGHT_CLASS_DEVICE 65 select VIDEOMODE_HELPERS 66 help 67 DRM panel driver for dumb panels that need at most a regulator and 68 a GPIO to be powered up. Optionally a backlight can be attached so 69 that it can be automatically turned off when the panel goes into a 70 low power state. 71 72config DRM_PANEL_ELIDA_KD35T133 73 tristate "Elida KD35T133 panel driver" 74 depends on OF 75 depends on DRM_MIPI_DSI 76 depends on BACKLIGHT_CLASS_DEVICE 77 help 78 Say Y here if you want to enable support for the Elida 79 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 80 system interfaces. 81 82config DRM_PANEL_FEIXIN_K101_IM2BA02 83 tristate "Feixin K101 IM2BA02 panel" 84 depends on OF 85 depends on DRM_MIPI_DSI 86 depends on BACKLIGHT_CLASS_DEVICE 87 help 88 Say Y here if you want to enable support for the Feixin K101 IM2BA02 89 4-lane 800x1280 MIPI DSI panel. 90 91config DRM_PANEL_FEIYANG_FY07024DI26A30D 92 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 93 depends on OF 94 depends on DRM_MIPI_DSI 95 depends on BACKLIGHT_CLASS_DEVICE 96 help 97 Say Y if you want to enable support for panels based on the 98 Feiyang FY07024DI26A30-D MIPI-DSI interface. 99 100config DRM_PANEL_ILITEK_IL9322 101 tristate "Ilitek ILI9322 320x240 QVGA panels" 102 depends on OF && SPI 103 select REGMAP 104 help 105 Say Y here if you want to enable support for Ilitek IL9322 106 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 107 108config DRM_PANEL_ILITEK_ILI9881C 109 tristate "Ilitek ILI9881C-based panels" 110 depends on OF 111 depends on DRM_MIPI_DSI 112 depends on BACKLIGHT_CLASS_DEVICE 113 help 114 Say Y if you want to enable support for panels based on the 115 Ilitek ILI9881c controller. 116 117config DRM_PANEL_INNOLUX_P079ZCA 118 tristate "Innolux P079ZCA panel" 119 depends on OF 120 depends on DRM_MIPI_DSI 121 depends on BACKLIGHT_CLASS_DEVICE 122 help 123 Say Y here if you want to enable support for Innolux P079ZCA 124 TFT-LCD modules. The panel has a 1024x768 resolution and uses 125 24 bit RGB per pixel. It provides a MIPI DSI interface to 126 the host and has a built-in LED backlight. 127 128config DRM_PANEL_JDI_LT070ME05000 129 tristate "JDI LT070ME05000 WUXGA DSI panel" 130 depends on OF 131 depends on DRM_MIPI_DSI 132 depends on BACKLIGHT_CLASS_DEVICE 133 help 134 Say Y here if you want to enable support for JDI DSI video mode 135 panel as found in Google Nexus 7 (2013) devices. 136 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 137 24 bit per pixel. 138 139config DRM_PANEL_KINGDISPLAY_KD097D04 140 tristate "Kingdisplay kd097d04 panel" 141 depends on OF 142 depends on DRM_MIPI_DSI 143 depends on BACKLIGHT_CLASS_DEVICE 144 help 145 Say Y here if you want to enable support for Kingdisplay kd097d04 146 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 147 24 bit RGB per pixel. It provides a MIPI DSI interface to 148 the host and has a built-in LED backlight. 149 150config DRM_PANEL_LEADTEK_LTK050H3146W 151 tristate "Leadtek LTK050H3146W panel" 152 depends on OF 153 depends on DRM_MIPI_DSI 154 depends on BACKLIGHT_CLASS_DEVICE 155 help 156 Say Y here if you want to enable support for Leadtek LTK050H3146W 157 TFT-LCD modules. The panel has a 720x1280 resolution and uses 158 24 bit RGB per pixel. It provides a MIPI DSI interface to 159 the host and has a built-in LED backlight. 160 161config DRM_PANEL_LEADTEK_LTK500HD1829 162 tristate "Leadtek LTK500HD1829 panel" 163 depends on OF 164 depends on DRM_MIPI_DSI 165 depends on BACKLIGHT_CLASS_DEVICE 166 help 167 Say Y here if you want to enable support for Kingdisplay kd097d04 168 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 169 24 bit RGB per pixel. It provides a MIPI DSI interface to 170 the host and has a built-in LED backlight. 171 172config DRM_PANEL_SAMSUNG_LD9040 173 tristate "Samsung LD9040 RGB/SPI panel" 174 depends on OF && SPI 175 select VIDEOMODE_HELPERS 176 177config DRM_PANEL_LG_LB035Q02 178 tristate "LG LB035Q024573 RGB panel" 179 depends on GPIOLIB && OF && SPI 180 help 181 Say Y here if you want to enable support for the LB035Q02 RGB panel 182 (found on the Gumstix Overo Palo35 board). To compile this driver as 183 a module, choose M here. 184 185config DRM_PANEL_LG_LG4573 186 tristate "LG4573 RGB/SPI panel" 187 depends on OF && SPI 188 select VIDEOMODE_HELPERS 189 help 190 Say Y here if you want to enable support for LG4573 RGB panel. 191 To compile this driver as a module, choose M here. 192 193config DRM_PANEL_NEC_NL8048HL11 194 tristate "NEC NL8048HL11 RGB panel" 195 depends on GPIOLIB && OF && SPI 196 help 197 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 198 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 199 as a module, choose M here. 200 201config DRM_PANEL_NOVATEK_NT35510 202 tristate "Novatek NT35510 RGB panel driver" 203 depends on OF 204 depends on DRM_MIPI_DSI 205 depends on BACKLIGHT_CLASS_DEVICE 206 help 207 Say Y here if you want to enable support for the panels built 208 around the Novatek NT35510 display controller, such as some 209 Hydis panels. 210 211config DRM_PANEL_NOVATEK_NT39016 212 tristate "Novatek NT39016 RGB/SPI panel" 213 depends on OF && SPI 214 depends on BACKLIGHT_CLASS_DEVICE 215 select REGMAP_SPI 216 help 217 Say Y here if you want to enable support for the panels built 218 around the Novatek NT39016 display controller. 219 220config DRM_PANEL_OLIMEX_LCD_OLINUXINO 221 tristate "Olimex LCD-OLinuXino panel" 222 depends on OF 223 depends on I2C 224 depends on BACKLIGHT_CLASS_DEVICE 225 help 226 The panel is used with different sizes LCDs, from 480x272 to 227 1280x800, and 24 bit per pixel. 228 229 Say Y here if you want to enable support for Olimex Ltd. 230 LCD-OLinuXino panel. 231 232config DRM_PANEL_ORISETECH_OTM8009A 233 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 234 depends on OF 235 depends on DRM_MIPI_DSI 236 depends on BACKLIGHT_CLASS_DEVICE 237 help 238 Say Y here if you want to enable support for Orise Technology 239 otm8009a 480x800 dsi 2dl panel. 240 241config DRM_PANEL_OSD_OSD101T2587_53TS 242 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 243 depends on OF 244 depends on DRM_MIPI_DSI 245 depends on BACKLIGHT_CLASS_DEVICE 246 help 247 Say Y here if you want to enable support for One Stop Displays 248 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 249 250config DRM_PANEL_PANASONIC_VVX10F034N00 251 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 252 depends on OF 253 depends on DRM_MIPI_DSI 254 depends on BACKLIGHT_CLASS_DEVICE 255 help 256 Say Y here if you want to enable support for Panasonic VVX10F034N00 257 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 258 Xperia Z2 tablets 259 260config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 261 tristate "Raspberry Pi 7-inch touchscreen panel" 262 depends on DRM_MIPI_DSI 263 help 264 Say Y here if you want to enable support for the Raspberry 265 Pi 7" Touchscreen. To compile this driver as a module, 266 choose M here. 267 268config DRM_PANEL_RAYDIUM_RM67191 269 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 270 depends on OF 271 depends on DRM_MIPI_DSI 272 depends on BACKLIGHT_CLASS_DEVICE 273 help 274 Say Y here if you want to enable support for Raydium RM67191 FHD 275 (1080x1920) DSI panel. 276 277config DRM_PANEL_RAYDIUM_RM68200 278 tristate "Raydium RM68200 720x1280 DSI video mode panel" 279 depends on OF 280 depends on DRM_MIPI_DSI 281 depends on BACKLIGHT_CLASS_DEVICE 282 help 283 Say Y here if you want to enable support for Raydium RM68200 284 720x1280 DSI video mode panel. 285 286config DRM_PANEL_ROCKTECH_JH057N00900 287 tristate "Rocktech JH057N00900 MIPI touchscreen panel" 288 depends on OF 289 depends on DRM_MIPI_DSI 290 depends on BACKLIGHT_CLASS_DEVICE 291 help 292 Say Y here if you want to enable support for Rocktech JH057N00900 293 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a 294 resolution of 720x1440 pixels, a built in backlight and touch 295 controller. 296 Touch input support is provided by the goodix driver and needs to be 297 selected separately. 298 299config DRM_PANEL_RONBO_RB070D30 300 tristate "Ronbo Electronics RB070D30 panel" 301 depends on OF 302 depends on DRM_MIPI_DSI 303 depends on BACKLIGHT_CLASS_DEVICE 304 help 305 Say Y here if you want to enable support for Ronbo Electronics 306 RB070D30 1024x600 DSI panel. 307 308config DRM_PANEL_SAMSUNG_S6D16D0 309 tristate "Samsung S6D16D0 DSI video mode panel" 310 depends on OF 311 depends on DRM_MIPI_DSI 312 select VIDEOMODE_HELPERS 313 314config DRM_PANEL_SAMSUNG_S6E3HA2 315 tristate "Samsung S6E3HA2 DSI video mode panel" 316 depends on OF 317 depends on DRM_MIPI_DSI 318 depends on BACKLIGHT_CLASS_DEVICE 319 select VIDEOMODE_HELPERS 320 321config DRM_PANEL_SAMSUNG_S6E63J0X03 322 tristate "Samsung S6E63J0X03 DSI command mode panel" 323 depends on OF 324 depends on DRM_MIPI_DSI 325 depends on BACKLIGHT_CLASS_DEVICE 326 select VIDEOMODE_HELPERS 327 328config DRM_PANEL_SAMSUNG_S6E63M0 329 tristate "Samsung S6E63M0 RGB/SPI panel" 330 depends on OF 331 depends on SPI 332 depends on BACKLIGHT_CLASS_DEVICE 333 help 334 Say Y here if you want to enable support for Samsung S6E63M0 335 AMOLED LCD panel. 336 337config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 338 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 339 depends on OF 340 select DRM_MIPI_DSI 341 select VIDEOMODE_HELPERS 342 343config DRM_PANEL_SAMSUNG_S6E8AA0 344 tristate "Samsung S6E8AA0 DSI video mode panel" 345 depends on OF 346 select DRM_MIPI_DSI 347 select VIDEOMODE_HELPERS 348 349config DRM_PANEL_SEIKO_43WVF1G 350 tristate "Seiko 43WVF1G panel" 351 depends on OF 352 depends on BACKLIGHT_CLASS_DEVICE 353 select VIDEOMODE_HELPERS 354 help 355 Say Y here if you want to enable support for the Seiko 356 43WVF1G controller for 800x480 LCD panels 357 358config DRM_PANEL_SHARP_LQ101R1SX01 359 tristate "Sharp LQ101R1SX01 panel" 360 depends on OF 361 depends on DRM_MIPI_DSI 362 depends on BACKLIGHT_CLASS_DEVICE 363 help 364 Say Y here if you want to enable support for Sharp LQ101R1SX01 365 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 366 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 367 the host and has a built-in LED backlight. 368 369 To compile this driver as a module, choose M here: the module 370 will be called panel-sharp-lq101r1sx01. 371 372config DRM_PANEL_SHARP_LS037V7DW01 373 tristate "Sharp LS037V7DW01 VGA LCD panel" 374 depends on GPIOLIB && OF && REGULATOR 375 help 376 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 377 (480x640) LCD panel (found on the TI SDP3430 board). 378 379config DRM_PANEL_SHARP_LS043T1LE01 380 tristate "Sharp LS043T1LE01 qHD video mode panel" 381 depends on OF 382 depends on DRM_MIPI_DSI 383 depends on BACKLIGHT_CLASS_DEVICE 384 help 385 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 386 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 387 388config DRM_PANEL_SITRONIX_ST7701 389 tristate "Sitronix ST7701 panel driver" 390 depends on OF 391 depends on DRM_MIPI_DSI 392 depends on BACKLIGHT_CLASS_DEVICE 393 help 394 Say Y here if you want to enable support for the Sitronix 395 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 396 system interfaces. 397 398config DRM_PANEL_SITRONIX_ST7789V 399 tristate "Sitronix ST7789V panel" 400 depends on OF && SPI 401 depends on BACKLIGHT_CLASS_DEVICE 402 help 403 Say Y here if you want to enable support for the Sitronix 404 ST7789V controller for 240x320 LCD panels 405 406config DRM_PANEL_SONY_ACX424AKP 407 tristate "Sony ACX424AKP DSI command mode panel" 408 depends on OF 409 depends on DRM_MIPI_DSI 410 depends on BACKLIGHT_CLASS_DEVICE 411 select VIDEOMODE_HELPERS 412 help 413 Say Y here if you want to enable the Sony ACX424 display 414 panel. This panel supports DSI in both command and video 415 mode. 416 417config DRM_PANEL_SONY_ACX565AKM 418 tristate "Sony ACX565AKM panel" 419 depends on GPIOLIB && OF && SPI 420 depends on BACKLIGHT_CLASS_DEVICE 421 help 422 Say Y here if you want to enable support for the Sony ACX565AKM 423 800x600 3.5" panel (found on the Nokia N900). 424 425config DRM_PANEL_TPO_TD028TTEC1 426 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 427 depends on OF && SPI 428 depends on BACKLIGHT_CLASS_DEVICE 429 help 430 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 431 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 432 433config DRM_PANEL_TPO_TD043MTEA1 434 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 435 depends on GPIOLIB && OF && REGULATOR && SPI 436 help 437 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 438 4.3" panel (found on the OMAP3 Pandora board). 439 440config DRM_PANEL_TPO_TPG110 441 tristate "TPO TPG 800x400 panel" 442 depends on OF && SPI && GPIOLIB 443 depends on BACKLIGHT_CLASS_DEVICE 444 help 445 Say Y here if you want to enable support for TPO TPG110 446 400CH LTPS TFT LCD Single Chip Digital Driver for up to 447 800x400 LCD panels. 448 449config DRM_PANEL_TRULY_NT35597_WQXGA 450 tristate "Truly WQXGA" 451 depends on OF 452 depends on DRM_MIPI_DSI 453 help 454 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 455 Video Mode panel 456 457config DRM_PANEL_VISIONOX_RM69299 458 tristate "Visionox RM69299" 459 depends on OF 460 depends on DRM_MIPI_DSI 461 help 462 Say Y here if you want to enable support for Visionox 463 RM69299 DSI Video Mode panel. 464 465config DRM_PANEL_XINPENG_XPP055C272 466 tristate "Xinpeng XPP055C272 panel driver" 467 depends on OF 468 depends on DRM_MIPI_DSI 469 depends on BACKLIGHT_CLASS_DEVICE 470 help 471 Say Y here if you want to enable support for the Xinpeng 472 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 473 system interfaces. 474endmenu 475