xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision 5860800e) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_BOE_BF060Y8M_AJ0
41	tristate "Boe BF060Y8M-AJ0 panel"
42	depends on OF
43	depends on DRM_MIPI_DSI
44	depends on BACKLIGHT_CLASS_DEVICE
45	help
46	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
47	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
48	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
49	  the host and backlight is controlled through DSI commands.
50
51config DRM_PANEL_BOE_HIMAX8279D
52	tristate "Boe Himax8279d panel"
53	depends on OF
54	depends on DRM_MIPI_DSI
55	depends on BACKLIGHT_CLASS_DEVICE
56	help
57	  Say Y here if you want to enable support for Boe Himax8279d
58	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
59	  24 bit RGB per pixel. It provides a MIPI DSI interface to
60	  the host and has a built-in LED backlight.
61
62config DRM_PANEL_BOE_TV101WUM_NL6
63	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
64	depends on OF
65	depends on DRM_MIPI_DSI
66	depends on BACKLIGHT_CLASS_DEVICE
67	help
68	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
69	  45NA WUXGA PANEL DSI Video Mode panel
70
71config DRM_PANEL_DSI_CM
72	tristate "Generic DSI command mode panels"
73	depends on OF
74	depends on DRM_MIPI_DSI
75	depends on BACKLIGHT_CLASS_DEVICE
76	help
77	  DRM panel driver for DSI command mode panels with support for
78	  embedded and external backlights.
79
80config DRM_PANEL_LVDS
81	tristate "Generic LVDS panel driver"
82	depends on OF
83	depends on BACKLIGHT_CLASS_DEVICE
84	select VIDEOMODE_HELPERS
85	help
86	  This driver supports LVDS panels that don't require device-specific
87	  handling of power supplies or control signals. It implements automatic
88	  backlight handling if the panel is attached to a backlight controller.
89
90config DRM_PANEL_SIMPLE
91	tristate "support for simple panels (other than eDP ones)"
92	depends on OF
93	depends on BACKLIGHT_CLASS_DEVICE
94	depends on PM
95	select VIDEOMODE_HELPERS
96	help
97	  DRM panel driver for dumb non-eDP panels that need at most a regulator
98	  and a GPIO to be powered up. Optionally a backlight can be attached so
99	  that it can be automatically turned off when the panel goes into a
100	  low power state.
101
102config DRM_PANEL_EDP
103	tristate "support for simple Embedded DisplayPort panels"
104	depends on OF
105	depends on BACKLIGHT_CLASS_DEVICE
106	depends on PM
107	select VIDEOMODE_HELPERS
108	select DRM_DISPLAY_DP_HELPER
109	select DRM_DISPLAY_HELPER
110	select DRM_DP_AUX_BUS
111	select DRM_KMS_HELPER
112	help
113	  DRM panel driver for dumb eDP panels that need at most a regulator and
114	  a GPIO to be powered up. Optionally a backlight can be attached so
115	  that it can be automatically turned off when the panel goes into a
116	  low power state.
117
118config DRM_PANEL_ELIDA_KD35T133
119	tristate "Elida KD35T133 panel driver"
120	depends on OF
121	depends on DRM_MIPI_DSI
122	depends on BACKLIGHT_CLASS_DEVICE
123	help
124	  Say Y here if you want to enable support for the Elida
125	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
126	  system interfaces.
127
128config DRM_PANEL_FEIXIN_K101_IM2BA02
129	tristate "Feixin K101 IM2BA02 panel"
130	depends on OF
131	depends on DRM_MIPI_DSI
132	depends on BACKLIGHT_CLASS_DEVICE
133	help
134	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
135	  4-lane 800x1280 MIPI DSI panel.
136
137config DRM_PANEL_FEIYANG_FY07024DI26A30D
138	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
139	depends on OF
140	depends on DRM_MIPI_DSI
141	depends on BACKLIGHT_CLASS_DEVICE
142	help
143	  Say Y if you want to enable support for panels based on the
144	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
145
146config DRM_PANEL_ILITEK_IL9322
147	tristate "Ilitek ILI9322 320x240 QVGA panels"
148	depends on OF && SPI
149	select REGMAP
150	help
151	  Say Y here if you want to enable support for Ilitek IL9322
152	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
153
154config DRM_PANEL_ILITEK_ILI9341
155	tristate "Ilitek ILI9341 240x320 QVGA panels"
156	depends on OF && SPI
157	depends on DRM_KMS_HELPER
158	depends on DRM_GEM_CMA_HELPER
159	depends on BACKLIGHT_CLASS_DEVICE
160	select DRM_MIPI_DBI
161	help
162	  Say Y here if you want to enable support for Ilitek IL9341
163	  QVGA (240x320) RGB panels. support serial & parallel rgb
164	  interface.
165
166config DRM_PANEL_ILITEK_ILI9881C
167	tristate "Ilitek ILI9881C-based panels"
168	depends on OF
169	depends on DRM_MIPI_DSI
170	depends on BACKLIGHT_CLASS_DEVICE
171	help
172	  Say Y if you want to enable support for panels based on the
173	  Ilitek ILI9881c controller.
174
175config DRM_PANEL_INNOLUX_EJ030NA
176        tristate "Innolux EJ030NA 320x480 LCD panel"
177        depends on OF && SPI
178        select REGMAP_SPI
179        help
180          Say Y here to enable support for the Innolux/Chimei EJ030NA
181          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
182          and LDK handheld gaming consoles.
183
184config DRM_PANEL_INNOLUX_P079ZCA
185	tristate "Innolux P079ZCA panel"
186	depends on OF
187	depends on DRM_MIPI_DSI
188	depends on BACKLIGHT_CLASS_DEVICE
189	help
190	  Say Y here if you want to enable support for Innolux P079ZCA
191	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
192	  24 bit RGB per pixel. It provides a MIPI DSI interface to
193	  the host and has a built-in LED backlight.
194
195config DRM_PANEL_JDI_LT070ME05000
196	tristate "JDI LT070ME05000 WUXGA DSI panel"
197	depends on OF
198	depends on DRM_MIPI_DSI
199	depends on BACKLIGHT_CLASS_DEVICE
200	help
201	  Say Y here if you want to enable support for JDI DSI video mode
202	  panel as found in Google Nexus 7 (2013) devices.
203	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
204	  24 bit per pixel.
205
206config DRM_PANEL_JDI_R63452
207	tristate "JDI R63452 Full HD DSI panel"
208	depends on OF
209	depends on DRM_MIPI_DSI
210	depends on BACKLIGHT_CLASS_DEVICE
211	help
212	  Say Y here if you want to enable support for the JDI R63452
213	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
214
215config DRM_PANEL_KHADAS_TS050
216	tristate "Khadas TS050 panel"
217	depends on OF
218	depends on DRM_MIPI_DSI
219	depends on BACKLIGHT_CLASS_DEVICE
220	help
221	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
222	  panel module. The panel has a 1080x1920 resolution and uses
223	  24 bit RGB per pixel. It provides a MIPI DSI interface to
224	  the host, a built-in LED backlight and touch controller.
225
226config DRM_PANEL_KINGDISPLAY_KD097D04
227	tristate "Kingdisplay kd097d04 panel"
228	depends on OF
229	depends on DRM_MIPI_DSI
230	depends on BACKLIGHT_CLASS_DEVICE
231	help
232	  Say Y here if you want to enable support for Kingdisplay kd097d04
233	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
234	  24 bit RGB per pixel. It provides a MIPI DSI interface to
235	  the host and has a built-in LED backlight.
236
237config DRM_PANEL_LEADTEK_LTK050H3146W
238	tristate "Leadtek LTK050H3146W panel"
239	depends on OF
240	depends on DRM_MIPI_DSI
241	depends on BACKLIGHT_CLASS_DEVICE
242	help
243	  Say Y here if you want to enable support for Leadtek LTK050H3146W
244	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
245	  24 bit RGB per pixel. It provides a MIPI DSI interface to
246	  the host and has a built-in LED backlight.
247
248config DRM_PANEL_LEADTEK_LTK500HD1829
249	tristate "Leadtek LTK500HD1829 panel"
250	depends on OF
251	depends on DRM_MIPI_DSI
252	depends on BACKLIGHT_CLASS_DEVICE
253	help
254	  Say Y here if you want to enable support for Kingdisplay kd097d04
255	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
256	  24 bit RGB per pixel. It provides a MIPI DSI interface to
257	  the host and has a built-in LED backlight.
258
259config DRM_PANEL_SAMSUNG_LD9040
260	tristate "Samsung LD9040 RGB/SPI panel"
261	depends on OF && SPI
262	select VIDEOMODE_HELPERS
263
264config DRM_PANEL_LG_LB035Q02
265	tristate "LG LB035Q024573 RGB panel"
266	depends on GPIOLIB && OF && SPI
267	help
268	  Say Y here if you want to enable support for the LB035Q02 RGB panel
269	  (found on the Gumstix Overo Palo35 board). To compile this driver as
270	  a module, choose M here.
271
272config DRM_PANEL_LG_LG4573
273	tristate "LG4573 RGB/SPI panel"
274	depends on OF && SPI
275	select VIDEOMODE_HELPERS
276	help
277	  Say Y here if you want to enable support for LG4573 RGB panel.
278	  To compile this driver as a module, choose M here.
279
280config DRM_PANEL_NEC_NL8048HL11
281	tristate "NEC NL8048HL11 RGB panel"
282	depends on GPIOLIB && OF && SPI
283	help
284	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
285	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
286	  as a module, choose M here.
287
288config DRM_PANEL_NEWVISION_NV3052C
289	tristate "NewVision NV3052C RGB/SPI panel"
290	depends on OF && SPI
291	depends on BACKLIGHT_CLASS_DEVICE
292	select DRM_MIPI_DBI
293	help
294	  Say Y here if you want to enable support for the panels built
295	  around the NewVision NV3052C display controller.
296
297config DRM_PANEL_NOVATEK_NT35510
298	tristate "Novatek NT35510 RGB panel driver"
299	depends on OF
300	depends on DRM_MIPI_DSI
301	depends on BACKLIGHT_CLASS_DEVICE
302	help
303	  Say Y here if you want to enable support for the panels built
304	  around the Novatek NT35510 display controller, such as some
305	  Hydis panels.
306
307config DRM_PANEL_NOVATEK_NT35560
308	tristate "Novatek NT35560 DSI command mode panel"
309	depends on OF
310	depends on DRM_MIPI_DSI
311	depends on BACKLIGHT_CLASS_DEVICE
312	select VIDEOMODE_HELPERS
313	help
314	  Say Y here if you want to enable the Novatek NT35560 display
315	  controller. This panel supports DSI in both command and video
316	  mode. This supports several panels such as Sony ACX424AKM and
317	  ACX424AKP.
318
319config DRM_PANEL_NOVATEK_NT35950
320	tristate "Novatek NT35950 DSI panel"
321	depends on OF
322	depends on DRM_MIPI_DSI
323	depends on BACKLIGHT_CLASS_DEVICE
324	help
325	  Say Y here if you want to enable support for the panels built
326	  around the Novatek NT35950 display controller, such as some
327	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
328	  mobile phones.
329
330config DRM_PANEL_NOVATEK_NT36672A
331	tristate "Novatek NT36672A DSI panel"
332	depends on OF
333	depends on DRM_MIPI_DSI
334	depends on BACKLIGHT_CLASS_DEVICE
335	help
336	  Say Y here if you want to enable support for the panels built
337	  around the Novatek NT36672A display controller, such as some
338	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
339
340config DRM_PANEL_NOVATEK_NT39016
341	tristate "Novatek NT39016 RGB/SPI panel"
342	depends on OF && SPI
343	depends on BACKLIGHT_CLASS_DEVICE
344	select REGMAP_SPI
345	help
346	  Say Y here if you want to enable support for the panels built
347	  around the Novatek NT39016 display controller.
348
349config DRM_PANEL_MANTIX_MLAF057WE51
350	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
351	depends on OF
352	depends on DRM_MIPI_DSI
353	depends on BACKLIGHT_CLASS_DEVICE
354	help
355	  Say Y here if you want to enable support for the Mantix
356	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
357	  has a resolution of 720x1440 pixels, a built in backlight and touch
358	  controller.
359
360config DRM_PANEL_OLIMEX_LCD_OLINUXINO
361	tristate "Olimex LCD-OLinuXino panel"
362	depends on OF
363	depends on I2C
364	depends on BACKLIGHT_CLASS_DEVICE
365	select CRC32
366	help
367	  The panel is used with different sizes LCDs, from 480x272 to
368	  1280x800, and 24 bit per pixel.
369
370	  Say Y here if you want to enable support for Olimex Ltd.
371	  LCD-OLinuXino panel.
372
373config DRM_PANEL_ORISETECH_OTM8009A
374	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
375	depends on OF
376	depends on DRM_MIPI_DSI
377	depends on BACKLIGHT_CLASS_DEVICE
378	help
379	  Say Y here if you want to enable support for Orise Technology
380	  otm8009a 480x800 dsi 2dl panel.
381
382config DRM_PANEL_OSD_OSD101T2587_53TS
383	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
384	depends on OF
385	depends on DRM_MIPI_DSI
386	depends on BACKLIGHT_CLASS_DEVICE
387	help
388	  Say Y here if you want to enable support for One Stop Displays
389	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
390
391config DRM_PANEL_PANASONIC_VVX10F034N00
392	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
393	depends on OF
394	depends on DRM_MIPI_DSI
395	depends on BACKLIGHT_CLASS_DEVICE
396	help
397	  Say Y here if you want to enable support for Panasonic VVX10F034N00
398	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
399	  Xperia Z2 tablets
400
401config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
402	tristate "Raspberry Pi 7-inch touchscreen panel"
403	depends on DRM_MIPI_DSI
404	help
405	  Say Y here if you want to enable support for the Raspberry
406	  Pi 7" Touchscreen.  To compile this driver as a module,
407	  choose M here.
408
409config DRM_PANEL_RAYDIUM_RM67191
410	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
411	depends on OF
412	depends on DRM_MIPI_DSI
413	depends on BACKLIGHT_CLASS_DEVICE
414	help
415	  Say Y here if you want to enable support for Raydium RM67191 FHD
416	  (1080x1920) DSI panel.
417
418config DRM_PANEL_RAYDIUM_RM68200
419	tristate "Raydium RM68200 720x1280 DSI video mode panel"
420	depends on OF
421	depends on DRM_MIPI_DSI
422	depends on BACKLIGHT_CLASS_DEVICE
423	help
424	  Say Y here if you want to enable support for Raydium RM68200
425	  720x1280 DSI video mode panel.
426
427config DRM_PANEL_RONBO_RB070D30
428	tristate "Ronbo Electronics RB070D30 panel"
429	depends on OF
430	depends on DRM_MIPI_DSI
431	depends on BACKLIGHT_CLASS_DEVICE
432	help
433	  Say Y here if you want to enable support for Ronbo Electronics
434	  RB070D30 1024x600 DSI panel.
435
436config DRM_PANEL_SAMSUNG_ATNA33XC20
437	tristate "Samsung ATNA33XC20 eDP panel"
438	depends on OF
439	depends on BACKLIGHT_CLASS_DEVICE
440	depends on PM
441	select DRM_DP_AUX_BUS
442	help
443	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
444	  be handled by the DRM_PANEL_SIMPLE driver because its power
445	  sequencing is non-standard.
446
447config DRM_PANEL_SAMSUNG_DB7430
448	tristate "Samsung DB7430-based DPI panels"
449	depends on OF && SPI && GPIOLIB
450	depends on BACKLIGHT_CLASS_DEVICE
451	select DRM_MIPI_DBI
452	help
453	  Say Y here if you want to enable support for the Samsung
454	  DB7430 DPI display controller used in such devices as the
455	  LMS397KF04 480x800 DPI panel.
456
457config DRM_PANEL_SAMSUNG_S6D16D0
458	tristate "Samsung S6D16D0 DSI video mode panel"
459	depends on OF
460	depends on DRM_MIPI_DSI
461	select VIDEOMODE_HELPERS
462
463config DRM_PANEL_SAMSUNG_S6D27A1
464	tristate "Samsung S6D27A1 DPI panel driver"
465	depends on OF && SPI && GPIOLIB
466	select DRM_MIPI_DBI
467	help
468	  Say Y here if you want to enable support for the Samsung
469	  S6D27A1 DPI 480x800 panel.
470
471	  This panel can be found in Samsung Galaxy Ace 2
472	  GT-I8160 mobile phone.
473
474config DRM_PANEL_SAMSUNG_S6E3HA2
475	tristate "Samsung S6E3HA2 DSI video mode panel"
476	depends on OF
477	depends on DRM_MIPI_DSI
478	depends on BACKLIGHT_CLASS_DEVICE
479	select VIDEOMODE_HELPERS
480
481config DRM_PANEL_SAMSUNG_S6E63J0X03
482	tristate "Samsung S6E63J0X03 DSI command mode panel"
483	depends on OF
484	depends on DRM_MIPI_DSI
485	depends on BACKLIGHT_CLASS_DEVICE
486	select VIDEOMODE_HELPERS
487
488config DRM_PANEL_SAMSUNG_S6E63M0
489	tristate "Samsung S6E63M0 RGB panel"
490	depends on OF
491	depends on BACKLIGHT_CLASS_DEVICE
492	help
493	  Say Y here if you want to enable support for Samsung S6E63M0
494	  AMOLED LCD panel. This panel can be accessed using SPI or
495	  DSI.
496
497config DRM_PANEL_SAMSUNG_S6E63M0_SPI
498	tristate "Samsung S6E63M0 RGB SPI interface"
499	depends on SPI
500	depends on DRM_PANEL_SAMSUNG_S6E63M0
501	default DRM_PANEL_SAMSUNG_S6E63M0
502	select DRM_MIPI_DBI
503	help
504	  Say Y here if you want to be able to access the Samsung
505	  S6E63M0 panel using SPI.
506
507config DRM_PANEL_SAMSUNG_S6E63M0_DSI
508	tristate "Samsung S6E63M0 RGB DSI interface"
509	depends on DRM_MIPI_DSI
510	depends on DRM_PANEL_SAMSUNG_S6E63M0
511	help
512	  Say Y here if you want to be able to access the Samsung
513	  S6E63M0 panel using DSI.
514
515config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
516	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
517	depends on OF
518	select DRM_MIPI_DSI
519	select VIDEOMODE_HELPERS
520
521config DRM_PANEL_SAMSUNG_S6E8AA0
522	tristate "Samsung S6E8AA0 DSI video mode panel"
523	depends on OF
524	select DRM_MIPI_DSI
525	select VIDEOMODE_HELPERS
526
527config DRM_PANEL_SAMSUNG_SOFEF00
528	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
529	depends on OF
530	depends on DRM_MIPI_DSI
531	depends on BACKLIGHT_CLASS_DEVICE
532	select VIDEOMODE_HELPERS
533	help
534	  Say Y or M here if you want to enable support for the Samsung AMOLED
535	  command mode panels found in the OnePlus 6/6T smartphones.
536
537	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
538
539config DRM_PANEL_SEIKO_43WVF1G
540	tristate "Seiko 43WVF1G panel"
541	depends on OF
542	depends on BACKLIGHT_CLASS_DEVICE
543	select VIDEOMODE_HELPERS
544	help
545	  Say Y here if you want to enable support for the Seiko
546	  43WVF1G controller for 800x480 LCD panels
547
548config DRM_PANEL_SHARP_LQ101R1SX01
549	tristate "Sharp LQ101R1SX01 panel"
550	depends on OF
551	depends on DRM_MIPI_DSI
552	depends on BACKLIGHT_CLASS_DEVICE
553	help
554	  Say Y here if you want to enable support for Sharp LQ101R1SX01
555	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
556	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
557	  the host and has a built-in LED backlight.
558
559	  To compile this driver as a module, choose M here: the module
560	  will be called panel-sharp-lq101r1sx01.
561
562config DRM_PANEL_SHARP_LS037V7DW01
563	tristate "Sharp LS037V7DW01 VGA LCD panel"
564	depends on GPIOLIB && OF && REGULATOR
565	help
566	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
567	  (480x640) LCD panel (found on the TI SDP3430 board).
568
569config DRM_PANEL_SHARP_LS043T1LE01
570	tristate "Sharp LS043T1LE01 qHD video mode panel"
571	depends on OF
572	depends on DRM_MIPI_DSI
573	depends on BACKLIGHT_CLASS_DEVICE
574	help
575	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
576	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
577
578config DRM_PANEL_SHARP_LS060T1SX01
579	tristate "Sharp LS060T1SX01 FullHD video mode panel"
580	depends on OF
581	depends on DRM_MIPI_DSI
582	depends on BACKLIGHT_CLASS_DEVICE
583	help
584	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
585	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
586	  Bundle.
587
588config DRM_PANEL_SITRONIX_ST7701
589	tristate "Sitronix ST7701 panel driver"
590	depends on OF
591	depends on DRM_MIPI_DSI
592	depends on BACKLIGHT_CLASS_DEVICE
593	help
594	  Say Y here if you want to enable support for the Sitronix
595	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
596	  system interfaces.
597
598config DRM_PANEL_SITRONIX_ST7703
599	tristate "Sitronix ST7703 based MIPI touchscreen panels"
600	depends on OF
601	depends on DRM_MIPI_DSI
602	depends on BACKLIGHT_CLASS_DEVICE
603	help
604	  Say Y here if you want to enable support for Sitronix ST7703 based
605	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
606	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
607	  in backlight and touch controller.
608	  Touch input support is provided by the goodix driver and needs to be
609	  selected separately.
610
611config DRM_PANEL_SITRONIX_ST7789V
612	tristate "Sitronix ST7789V panel"
613	depends on OF && SPI
614	depends on BACKLIGHT_CLASS_DEVICE
615	help
616	  Say Y here if you want to enable support for the Sitronix
617	  ST7789V controller for 240x320 LCD panels
618
619config DRM_PANEL_SONY_ACX565AKM
620	tristate "Sony ACX565AKM panel"
621	depends on GPIOLIB && OF && SPI
622	depends on BACKLIGHT_CLASS_DEVICE
623	help
624	  Say Y here if you want to enable support for the Sony ACX565AKM
625	  800x600 3.5" panel (found on the Nokia N900).
626
627config DRM_PANEL_SONY_TULIP_TRULY_NT35521
628	tristate "Sony Tulip Truly NT35521 panel"
629	depends on GPIOLIB && OF
630	depends on DRM_MIPI_DSI
631	depends on BACKLIGHT_CLASS_DEVICE
632	help
633	  Say Y here if you want to enable support for the Sony Tulip
634	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
635	  Aqua phone.
636
637config DRM_PANEL_TDO_TL070WSH30
638	tristate "TDO TL070WSH30 DSI panel"
639	depends on OF
640	depends on DRM_MIPI_DSI
641	depends on BACKLIGHT_CLASS_DEVICE
642	help
643	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
644	  panel module. The panel has a 1024×600 resolution and uses
645	  24 bit RGB per pixel. It provides a MIPI DSI interface to
646	  the host, a built-in LED backlight and touch controller.
647
648config DRM_PANEL_TPO_TD028TTEC1
649	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
650	depends on OF && SPI
651	depends on BACKLIGHT_CLASS_DEVICE
652	help
653	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
654	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
655
656config DRM_PANEL_TPO_TD043MTEA1
657	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
658	depends on GPIOLIB && OF && REGULATOR && SPI
659	help
660	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
661	  4.3" panel (found on the OMAP3 Pandora board).
662
663config DRM_PANEL_TPO_TPG110
664	tristate "TPO TPG 800x400 panel"
665	depends on OF && SPI && GPIOLIB
666	depends on BACKLIGHT_CLASS_DEVICE
667	help
668	  Say Y here if you want to enable support for TPO TPG110
669	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
670	  800x400 LCD panels.
671
672config DRM_PANEL_TRULY_NT35597_WQXGA
673	tristate "Truly WQXGA"
674	depends on OF
675	depends on DRM_MIPI_DSI
676	help
677	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
678	  Video Mode panel
679
680config DRM_PANEL_VISIONOX_RM69299
681	tristate "Visionox RM69299"
682	depends on OF
683	depends on DRM_MIPI_DSI
684	help
685	  Say Y here if you want to enable support for Visionox
686	  RM69299  DSI Video Mode panel.
687
688config DRM_PANEL_WIDECHIPS_WS2401
689	tristate "Widechips WS2401 DPI panel driver"
690	depends on SPI && GPIOLIB
691	depends on BACKLIGHT_CLASS_DEVICE
692	select DRM_MIPI_DBI
693	help
694	  Say Y here if you want to enable support for the Widechips WS2401 DPI
695	  480x800 display controller used in panels such as Samsung LMS380KF01.
696	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
697
698config DRM_PANEL_XINPENG_XPP055C272
699	tristate "Xinpeng XPP055C272 panel driver"
700	depends on OF
701	depends on DRM_MIPI_DSI
702	depends on BACKLIGHT_CLASS_DEVICE
703	help
704	  Say Y here if you want to enable support for the Xinpeng
705	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
706	  system interfaces.
707endmenu
708