xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision 4a2d80ad) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TV101WUM_NL6
71	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
77	  45NA WUXGA PANEL DSI Video Mode panel
78
79config DRM_PANEL_DSI_CM
80	tristate "Generic DSI command mode panels"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  DRM panel driver for DSI command mode panels with support for
86	  embedded and external backlights.
87
88config DRM_PANEL_LVDS
89	tristate "Generic LVDS panel driver"
90	depends on OF
91	depends on BACKLIGHT_CLASS_DEVICE
92	select VIDEOMODE_HELPERS
93	help
94	  This driver supports LVDS panels that don't require device-specific
95	  handling of power supplies or control signals. It implements automatic
96	  backlight handling if the panel is attached to a backlight controller.
97
98config DRM_PANEL_SIMPLE
99	tristate "support for simple panels (other than eDP ones)"
100	depends on OF
101	depends on BACKLIGHT_CLASS_DEVICE
102	depends on PM
103	select VIDEOMODE_HELPERS
104	help
105	  DRM panel driver for dumb non-eDP panels that need at most a regulator
106	  and a GPIO to be powered up. Optionally a backlight can be attached so
107	  that it can be automatically turned off when the panel goes into a
108	  low power state.
109
110config DRM_PANEL_EDP
111	tristate "support for simple Embedded DisplayPort panels"
112	depends on OF
113	depends on BACKLIGHT_CLASS_DEVICE
114	depends on PM
115	select VIDEOMODE_HELPERS
116	select DRM_DISPLAY_DP_HELPER
117	select DRM_DISPLAY_HELPER
118	select DRM_DP_AUX_BUS
119	select DRM_KMS_HELPER
120	help
121	  DRM panel driver for dumb eDP panels that need at most a regulator and
122	  a GPIO to be powered up. Optionally a backlight can be attached so
123	  that it can be automatically turned off when the panel goes into a
124	  low power state.
125
126config DRM_PANEL_EBBG_FT8719
127	tristate "EBBG FT8719 panel driver"
128	depends on OF
129	depends on DRM_MIPI_DSI
130	depends on BACKLIGHT_CLASS_DEVICE
131	help
132	  Say Y here if you want to enable support for the EBBG FT8719
133	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
134	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
135	  interface to the host.
136
137config DRM_PANEL_ELIDA_KD35T133
138	tristate "Elida KD35T133 panel driver"
139	depends on OF
140	depends on DRM_MIPI_DSI
141	depends on BACKLIGHT_CLASS_DEVICE
142	help
143	  Say Y here if you want to enable support for the Elida
144	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
145	  system interfaces.
146
147config DRM_PANEL_FEIXIN_K101_IM2BA02
148	tristate "Feixin K101 IM2BA02 panel"
149	depends on OF
150	depends on DRM_MIPI_DSI
151	depends on BACKLIGHT_CLASS_DEVICE
152	help
153	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
154	  4-lane 800x1280 MIPI DSI panel.
155
156config DRM_PANEL_FEIYANG_FY07024DI26A30D
157	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
158	depends on OF
159	depends on DRM_MIPI_DSI
160	depends on BACKLIGHT_CLASS_DEVICE
161	help
162	  Say Y if you want to enable support for panels based on the
163	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
164
165config DRM_PANEL_HIMAX_HX8394
166	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
167	depends on OF
168	depends on DRM_MIPI_DSI
169	depends on BACKLIGHT_CLASS_DEVICE
170	help
171	  Say Y if you want to enable support for panels based on the
172	  Himax HX8394 controller, such as the HannStar HSD060BHW4
173	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
174
175	  If M is selected the module will be called panel-himax-hx8394.
176
177config DRM_PANEL_ILITEK_IL9322
178	tristate "Ilitek ILI9322 320x240 QVGA panels"
179	depends on OF && SPI
180	select REGMAP
181	help
182	  Say Y here if you want to enable support for Ilitek IL9322
183	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
184
185config DRM_PANEL_ILITEK_ILI9341
186	tristate "Ilitek ILI9341 240x320 QVGA panels"
187	depends on OF && SPI
188	select DRM_KMS_HELPER
189	select DRM_GEM_DMA_HELPER
190	depends on BACKLIGHT_CLASS_DEVICE
191	select DRM_MIPI_DBI
192	help
193	  Say Y here if you want to enable support for Ilitek IL9341
194	  QVGA (240x320) RGB panels. support serial & parallel rgb
195	  interface.
196
197config DRM_PANEL_ILITEK_ILI9881C
198	tristate "Ilitek ILI9881C-based panels"
199	depends on OF
200	depends on DRM_MIPI_DSI
201	depends on BACKLIGHT_CLASS_DEVICE
202	help
203	  Say Y if you want to enable support for panels based on the
204	  Ilitek ILI9881c controller.
205
206config DRM_PANEL_INNOLUX_EJ030NA
207        tristate "Innolux EJ030NA 320x480 LCD panel"
208        depends on OF && SPI
209        select REGMAP_SPI
210        help
211          Say Y here to enable support for the Innolux/Chimei EJ030NA
212          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
213          and LDK handheld gaming consoles.
214
215config DRM_PANEL_INNOLUX_P079ZCA
216	tristate "Innolux P079ZCA panel"
217	depends on OF
218	depends on DRM_MIPI_DSI
219	depends on BACKLIGHT_CLASS_DEVICE
220	help
221	  Say Y here if you want to enable support for Innolux P079ZCA
222	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
223	  24 bit RGB per pixel. It provides a MIPI DSI interface to
224	  the host and has a built-in LED backlight.
225
226config DRM_PANEL_JADARD_JD9365DA_H3
227	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
228	depends on OF
229	depends on DRM_MIPI_DSI
230	depends on BACKLIGHT_CLASS_DEVICE
231	help
232	  Say Y here if you want to enable support for Jadard JD9365DA-H3
233	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
234	  800RGBx1280 dots at maximum.
235
236config DRM_PANEL_JDI_LT070ME05000
237	tristate "JDI LT070ME05000 WUXGA DSI panel"
238	depends on OF
239	depends on DRM_MIPI_DSI
240	depends on BACKLIGHT_CLASS_DEVICE
241	help
242	  Say Y here if you want to enable support for JDI DSI video mode
243	  panel as found in Google Nexus 7 (2013) devices.
244	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
245	  24 bit per pixel.
246
247config DRM_PANEL_JDI_R63452
248	tristate "JDI R63452 Full HD DSI panel"
249	depends on OF
250	depends on DRM_MIPI_DSI
251	depends on BACKLIGHT_CLASS_DEVICE
252	help
253	  Say Y here if you want to enable support for the JDI R63452
254	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
255
256config DRM_PANEL_KHADAS_TS050
257	tristate "Khadas TS050 panel"
258	depends on OF
259	depends on DRM_MIPI_DSI
260	depends on BACKLIGHT_CLASS_DEVICE
261	help
262	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
263	  panel module. The panel has a 1080x1920 resolution and uses
264	  24 bit RGB per pixel. It provides a MIPI DSI interface to
265	  the host, a built-in LED backlight and touch controller.
266
267config DRM_PANEL_KINGDISPLAY_KD097D04
268	tristate "Kingdisplay kd097d04 panel"
269	depends on OF
270	depends on DRM_MIPI_DSI
271	depends on BACKLIGHT_CLASS_DEVICE
272	help
273	  Say Y here if you want to enable support for Kingdisplay kd097d04
274	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
275	  24 bit RGB per pixel. It provides a MIPI DSI interface to
276	  the host and has a built-in LED backlight.
277
278config DRM_PANEL_LEADTEK_LTK050H3146W
279	tristate "Leadtek LTK050H3146W panel"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y here if you want to enable support for Leadtek LTK050H3146W
285	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
286	  24 bit RGB per pixel. It provides a MIPI DSI interface to
287	  the host and has a built-in LED backlight.
288
289config DRM_PANEL_LEADTEK_LTK500HD1829
290	tristate "Leadtek LTK500HD1829 panel"
291	depends on OF
292	depends on DRM_MIPI_DSI
293	depends on BACKLIGHT_CLASS_DEVICE
294	help
295	  Say Y here if you want to enable support for Kingdisplay kd097d04
296	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
297	  24 bit RGB per pixel. It provides a MIPI DSI interface to
298	  the host and has a built-in LED backlight.
299
300config DRM_PANEL_SAMSUNG_LD9040
301	tristate "Samsung LD9040 RGB/SPI panel"
302	depends on OF && SPI
303	select VIDEOMODE_HELPERS
304
305config DRM_PANEL_LG_LB035Q02
306	tristate "LG LB035Q024573 RGB panel"
307	depends on GPIOLIB && OF && SPI
308	help
309	  Say Y here if you want to enable support for the LB035Q02 RGB panel
310	  (found on the Gumstix Overo Palo35 board). To compile this driver as
311	  a module, choose M here.
312
313config DRM_PANEL_LG_LG4573
314	tristate "LG4573 RGB/SPI panel"
315	depends on OF && SPI
316	select VIDEOMODE_HELPERS
317	help
318	  Say Y here if you want to enable support for LG4573 RGB panel.
319	  To compile this driver as a module, choose M here.
320
321config DRM_PANEL_NEC_NL8048HL11
322	tristate "NEC NL8048HL11 RGB panel"
323	depends on GPIOLIB && OF && SPI
324	help
325	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
326	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
327	  as a module, choose M here.
328
329config DRM_PANEL_NEWVISION_NV3051D
330	tristate "NewVision NV3051D DSI panel"
331	depends on OF
332	depends on DRM_MIPI_DSI
333	depends on BACKLIGHT_CLASS_DEVICE
334	help
335	  This driver supports the NV3051D based panel found on the Anbernic
336	  RG353P and RG353V.
337
338config DRM_PANEL_NEWVISION_NV3052C
339	tristate "NewVision NV3052C RGB/SPI panel"
340	depends on OF && SPI
341	depends on BACKLIGHT_CLASS_DEVICE
342	select DRM_MIPI_DBI
343	help
344	  Say Y here if you want to enable support for the panels built
345	  around the NewVision NV3052C display controller.
346
347config DRM_PANEL_NOVATEK_NT35510
348	tristate "Novatek NT35510 RGB panel driver"
349	depends on OF
350	depends on DRM_MIPI_DSI
351	depends on BACKLIGHT_CLASS_DEVICE
352	help
353	  Say Y here if you want to enable support for the panels built
354	  around the Novatek NT35510 display controller, such as some
355	  Hydis panels.
356
357config DRM_PANEL_NOVATEK_NT35560
358	tristate "Novatek NT35560 DSI command mode panel"
359	depends on OF
360	depends on DRM_MIPI_DSI
361	depends on BACKLIGHT_CLASS_DEVICE
362	select VIDEOMODE_HELPERS
363	help
364	  Say Y here if you want to enable the Novatek NT35560 display
365	  controller. This panel supports DSI in both command and video
366	  mode. This supports several panels such as Sony ACX424AKM and
367	  ACX424AKP.
368
369config DRM_PANEL_NOVATEK_NT35950
370	tristate "Novatek NT35950 DSI panel"
371	depends on OF
372	depends on DRM_MIPI_DSI
373	depends on BACKLIGHT_CLASS_DEVICE
374	help
375	  Say Y here if you want to enable support for the panels built
376	  around the Novatek NT35950 display controller, such as some
377	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
378	  mobile phones.
379
380config DRM_PANEL_NOVATEK_NT36672A
381	tristate "Novatek NT36672A DSI panel"
382	depends on OF
383	depends on DRM_MIPI_DSI
384	depends on BACKLIGHT_CLASS_DEVICE
385	help
386	  Say Y here if you want to enable support for the panels built
387	  around the Novatek NT36672A display controller, such as some
388	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
389
390config DRM_PANEL_NOVATEK_NT39016
391	tristate "Novatek NT39016 RGB/SPI panel"
392	depends on OF && SPI
393	depends on BACKLIGHT_CLASS_DEVICE
394	select REGMAP_SPI
395	help
396	  Say Y here if you want to enable support for the panels built
397	  around the Novatek NT39016 display controller.
398
399config DRM_PANEL_MANTIX_MLAF057WE51
400	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
401	depends on OF
402	depends on DRM_MIPI_DSI
403	depends on BACKLIGHT_CLASS_DEVICE
404	help
405	  Say Y here if you want to enable support for the Mantix
406	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
407	  has a resolution of 720x1440 pixels, a built in backlight and touch
408	  controller.
409
410config DRM_PANEL_OLIMEX_LCD_OLINUXINO
411	tristate "Olimex LCD-OLinuXino panel"
412	depends on OF
413	depends on I2C
414	depends on BACKLIGHT_CLASS_DEVICE
415	select CRC32
416	help
417	  The panel is used with different sizes LCDs, from 480x272 to
418	  1280x800, and 24 bit per pixel.
419
420	  Say Y here if you want to enable support for Olimex Ltd.
421	  LCD-OLinuXino panel.
422
423config DRM_PANEL_ORISETECH_OTA5601A
424        tristate "Orise Technology ota5601a RGB/SPI panel"
425        depends on SPI
426        depends on BACKLIGHT_CLASS_DEVICE
427        select REGMAP_SPI
428        help
429          Say Y here if you want to enable support for the panels built
430          around the Orise Technology OTA9601A display controller.
431
432config DRM_PANEL_ORISETECH_OTM8009A
433	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
434	depends on OF
435	depends on DRM_MIPI_DSI
436	depends on BACKLIGHT_CLASS_DEVICE
437	help
438	  Say Y here if you want to enable support for Orise Technology
439	  otm8009a 480x800 dsi 2dl panel.
440
441config DRM_PANEL_OSD_OSD101T2587_53TS
442	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
443	depends on OF
444	depends on DRM_MIPI_DSI
445	depends on BACKLIGHT_CLASS_DEVICE
446	help
447	  Say Y here if you want to enable support for One Stop Displays
448	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
449
450config DRM_PANEL_PANASONIC_VVX10F034N00
451	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
452	depends on OF
453	depends on DRM_MIPI_DSI
454	depends on BACKLIGHT_CLASS_DEVICE
455	help
456	  Say Y here if you want to enable support for Panasonic VVX10F034N00
457	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
458	  Xperia Z2 tablets
459
460config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
461	tristate "Raspberry Pi 7-inch touchscreen panel"
462	depends on DRM_MIPI_DSI
463	help
464	  Say Y here if you want to enable support for the Raspberry
465	  Pi 7" Touchscreen.  To compile this driver as a module,
466	  choose M here.
467
468config DRM_PANEL_RAYDIUM_RM67191
469	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
470	depends on OF
471	depends on DRM_MIPI_DSI
472	depends on BACKLIGHT_CLASS_DEVICE
473	help
474	  Say Y here if you want to enable support for Raydium RM67191 FHD
475	  (1080x1920) DSI panel.
476
477config DRM_PANEL_RAYDIUM_RM68200
478	tristate "Raydium RM68200 720x1280 DSI video mode panel"
479	depends on OF
480	depends on DRM_MIPI_DSI
481	depends on BACKLIGHT_CLASS_DEVICE
482	help
483	  Say Y here if you want to enable support for Raydium RM68200
484	  720x1280 DSI video mode panel.
485
486config DRM_PANEL_RONBO_RB070D30
487	tristate "Ronbo Electronics RB070D30 panel"
488	depends on OF
489	depends on DRM_MIPI_DSI
490	depends on BACKLIGHT_CLASS_DEVICE
491	help
492	  Say Y here if you want to enable support for Ronbo Electronics
493	  RB070D30 1024x600 DSI panel.
494
495config DRM_PANEL_SAMSUNG_ATNA33XC20
496	tristate "Samsung ATNA33XC20 eDP panel"
497	depends on OF
498	depends on BACKLIGHT_CLASS_DEVICE
499	depends on PM
500	select DRM_DISPLAY_DP_HELPER
501	select DRM_DISPLAY_HELPER
502	select DRM_DP_AUX_BUS
503	help
504	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
505	  be handled by the DRM_PANEL_SIMPLE driver because its power
506	  sequencing is non-standard.
507
508config DRM_PANEL_SAMSUNG_DB7430
509	tristate "Samsung DB7430-based DPI panels"
510	depends on OF && SPI && GPIOLIB
511	depends on BACKLIGHT_CLASS_DEVICE
512	select DRM_MIPI_DBI
513	help
514	  Say Y here if you want to enable support for the Samsung
515	  DB7430 DPI display controller used in such devices as the
516	  LMS397KF04 480x800 DPI panel.
517
518config DRM_PANEL_SAMSUNG_S6D16D0
519	tristate "Samsung S6D16D0 DSI video mode panel"
520	depends on OF
521	depends on DRM_MIPI_DSI
522	select VIDEOMODE_HELPERS
523
524config DRM_PANEL_SAMSUNG_S6D27A1
525	tristate "Samsung S6D27A1 DPI panel driver"
526	depends on OF && SPI && GPIOLIB
527	select DRM_MIPI_DBI
528	help
529	  Say Y here if you want to enable support for the Samsung
530	  S6D27A1 DPI 480x800 panel.
531
532	  This panel can be found in Samsung Galaxy Ace 2
533	  GT-I8160 mobile phone.
534
535config DRM_PANEL_SAMSUNG_S6E3HA2
536	tristate "Samsung S6E3HA2 DSI video mode panel"
537	depends on OF
538	depends on DRM_MIPI_DSI
539	depends on BACKLIGHT_CLASS_DEVICE
540	select VIDEOMODE_HELPERS
541
542config DRM_PANEL_SAMSUNG_S6E63J0X03
543	tristate "Samsung S6E63J0X03 DSI command mode panel"
544	depends on OF
545	depends on DRM_MIPI_DSI
546	depends on BACKLIGHT_CLASS_DEVICE
547	select VIDEOMODE_HELPERS
548
549config DRM_PANEL_SAMSUNG_S6E63M0
550	tristate "Samsung S6E63M0 RGB panel"
551	depends on OF
552	depends on BACKLIGHT_CLASS_DEVICE
553	help
554	  Say Y here if you want to enable support for Samsung S6E63M0
555	  AMOLED LCD panel. This panel can be accessed using SPI or
556	  DSI.
557
558config DRM_PANEL_SAMSUNG_S6E63M0_SPI
559	tristate "Samsung S6E63M0 RGB SPI interface"
560	depends on SPI
561	depends on DRM_PANEL_SAMSUNG_S6E63M0
562	default DRM_PANEL_SAMSUNG_S6E63M0
563	select DRM_MIPI_DBI
564	help
565	  Say Y here if you want to be able to access the Samsung
566	  S6E63M0 panel using SPI.
567
568config DRM_PANEL_SAMSUNG_S6E63M0_DSI
569	tristate "Samsung S6E63M0 RGB DSI interface"
570	depends on DRM_MIPI_DSI
571	depends on DRM_PANEL_SAMSUNG_S6E63M0
572	help
573	  Say Y here if you want to be able to access the Samsung
574	  S6E63M0 panel using DSI.
575
576config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
577	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
578	depends on OF
579	select DRM_MIPI_DSI
580	select VIDEOMODE_HELPERS
581
582config DRM_PANEL_SAMSUNG_S6E8AA0
583	tristate "Samsung S6E8AA0 DSI video mode panel"
584	depends on OF
585	select DRM_MIPI_DSI
586	select VIDEOMODE_HELPERS
587
588config DRM_PANEL_SAMSUNG_SOFEF00
589	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
590	depends on OF
591	depends on DRM_MIPI_DSI
592	depends on BACKLIGHT_CLASS_DEVICE
593	select VIDEOMODE_HELPERS
594	help
595	  Say Y or M here if you want to enable support for the Samsung AMOLED
596	  command mode panels found in the OnePlus 6/6T smartphones.
597
598	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
599
600config DRM_PANEL_SEIKO_43WVF1G
601	tristate "Seiko 43WVF1G panel"
602	depends on OF
603	depends on BACKLIGHT_CLASS_DEVICE
604	select VIDEOMODE_HELPERS
605	help
606	  Say Y here if you want to enable support for the Seiko
607	  43WVF1G controller for 800x480 LCD panels
608
609config DRM_PANEL_SHARP_LQ101R1SX01
610	tristate "Sharp LQ101R1SX01 panel"
611	depends on OF
612	depends on DRM_MIPI_DSI
613	depends on BACKLIGHT_CLASS_DEVICE
614	help
615	  Say Y here if you want to enable support for Sharp LQ101R1SX01
616	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
617	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
618	  the host and has a built-in LED backlight.
619
620	  To compile this driver as a module, choose M here: the module
621	  will be called panel-sharp-lq101r1sx01.
622
623config DRM_PANEL_SHARP_LS037V7DW01
624	tristate "Sharp LS037V7DW01 VGA LCD panel"
625	depends on GPIOLIB && OF && REGULATOR
626	help
627	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
628	  (480x640) LCD panel (found on the TI SDP3430 board).
629
630config DRM_PANEL_SHARP_LS043T1LE01
631	tristate "Sharp LS043T1LE01 qHD video mode panel"
632	depends on OF
633	depends on DRM_MIPI_DSI
634	depends on BACKLIGHT_CLASS_DEVICE
635	help
636	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
637	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
638
639config DRM_PANEL_SHARP_LS060T1SX01
640	tristate "Sharp LS060T1SX01 FullHD video mode panel"
641	depends on OF
642	depends on DRM_MIPI_DSI
643	depends on BACKLIGHT_CLASS_DEVICE
644	help
645	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
646	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
647	  Bundle.
648
649config DRM_PANEL_SITRONIX_ST7701
650	tristate "Sitronix ST7701 panel driver"
651	depends on OF
652	depends on DRM_MIPI_DSI
653	depends on BACKLIGHT_CLASS_DEVICE
654	help
655	  Say Y here if you want to enable support for the Sitronix
656	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
657	  system interfaces.
658
659config DRM_PANEL_SITRONIX_ST7703
660	tristate "Sitronix ST7703 based MIPI touchscreen panels"
661	depends on OF
662	depends on DRM_MIPI_DSI
663	depends on BACKLIGHT_CLASS_DEVICE
664	help
665	  Say Y here if you want to enable support for Sitronix ST7703 based
666	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
667	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
668	  in backlight and touch controller.
669	  Touch input support is provided by the goodix driver and needs to be
670	  selected separately.
671
672config DRM_PANEL_SITRONIX_ST7789V
673	tristate "Sitronix ST7789V panel"
674	depends on OF && SPI
675	depends on BACKLIGHT_CLASS_DEVICE
676	help
677	  Say Y here if you want to enable support for the Sitronix
678	  ST7789V controller for 240x320 LCD panels
679
680config DRM_PANEL_SONY_ACX565AKM
681	tristate "Sony ACX565AKM panel"
682	depends on GPIOLIB && OF && SPI
683	depends on BACKLIGHT_CLASS_DEVICE
684	help
685	  Say Y here if you want to enable support for the Sony ACX565AKM
686	  800x600 3.5" panel (found on the Nokia N900).
687
688config DRM_PANEL_SONY_TULIP_TRULY_NT35521
689	tristate "Sony Tulip Truly NT35521 panel"
690	depends on GPIOLIB && OF
691	depends on DRM_MIPI_DSI
692	depends on BACKLIGHT_CLASS_DEVICE
693	help
694	  Say Y here if you want to enable support for the Sony Tulip
695	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
696	  Aqua phone.
697
698config DRM_PANEL_TDO_TL070WSH30
699	tristate "TDO TL070WSH30 DSI panel"
700	depends on OF
701	depends on DRM_MIPI_DSI
702	depends on BACKLIGHT_CLASS_DEVICE
703	help
704	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
705	  panel module. The panel has a 1024×600 resolution and uses
706	  24 bit RGB per pixel. It provides a MIPI DSI interface to
707	  the host, a built-in LED backlight and touch controller.
708
709config DRM_PANEL_TPO_TD028TTEC1
710	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
711	depends on OF && SPI
712	depends on BACKLIGHT_CLASS_DEVICE
713	help
714	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
715	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
716
717config DRM_PANEL_TPO_TD043MTEA1
718	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
719	depends on GPIOLIB && OF && REGULATOR && SPI
720	help
721	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
722	  4.3" panel (found on the OMAP3 Pandora board).
723
724config DRM_PANEL_TPO_TPG110
725	tristate "TPO TPG 800x400 panel"
726	depends on OF && SPI && GPIOLIB
727	depends on BACKLIGHT_CLASS_DEVICE
728	help
729	  Say Y here if you want to enable support for TPO TPG110
730	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
731	  800x400 LCD panels.
732
733config DRM_PANEL_TRULY_NT35597_WQXGA
734	tristate "Truly WQXGA"
735	depends on OF
736	depends on DRM_MIPI_DSI
737	help
738	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
739	  Video Mode panel
740
741config DRM_PANEL_VISIONOX_RM69299
742	tristate "Visionox RM69299"
743	depends on OF
744	depends on DRM_MIPI_DSI
745	help
746	  Say Y here if you want to enable support for Visionox
747	  RM69299  DSI Video Mode panel.
748
749config DRM_PANEL_VISIONOX_VTDR6130
750	tristate "Visionox VTDR6130"
751	depends on OF
752	depends on DRM_MIPI_DSI
753	depends on BACKLIGHT_CLASS_DEVICE
754	help
755	  Say Y here if you want to enable support for Visionox
756	  VTDR6130 1080x2400 AMOLED DSI panel.
757
758config DRM_PANEL_WIDECHIPS_WS2401
759	tristate "Widechips WS2401 DPI panel driver"
760	depends on SPI && GPIOLIB
761	depends on BACKLIGHT_CLASS_DEVICE
762	select DRM_MIPI_DBI
763	help
764	  Say Y here if you want to enable support for the Widechips WS2401 DPI
765	  480x800 display controller used in panels such as Samsung LMS380KF01.
766	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
767
768config DRM_PANEL_XINPENG_XPP055C272
769	tristate "Xinpeng XPP055C272 panel driver"
770	depends on OF
771	depends on DRM_MIPI_DSI
772	depends on BACKLIGHT_CLASS_DEVICE
773	help
774	  Say Y here if you want to enable support for the Xinpeng
775	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
776	  system interfaces.
777endmenu
778