1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ARM_VERSATILE 12 tristate "ARM Versatile panel driver" 13 depends on OF 14 depends on MFD_SYSCON 15 select VIDEOMODE_HELPERS 16 help 17 This driver supports the ARM Versatile panels connected to ARM 18 reference designs. The panel is detected using special registers 19 in the Versatile family syscon registers. 20 21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 22 tristate "ASUS Z00T TM5P5 NT35596 panel" 23 depends on GPIOLIB && OF 24 depends on DRM_MIPI_DSI 25 depends on BACKLIGHT_CLASS_DEVICE 26 help 27 Say Y here if you want to enable support for the ASUS TMP5P5 28 NT35596 1080x1920 video mode panel as found in some Asus 29 Zenfone 2 Laser Z00T devices. 30 31config DRM_PANEL_BOE_HIMAX8279D 32 tristate "Boe Himax8279d panel" 33 depends on OF 34 depends on DRM_MIPI_DSI 35 depends on BACKLIGHT_CLASS_DEVICE 36 help 37 Say Y here if you want to enable support for Boe Himax8279d 38 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 39 24 bit RGB per pixel. It provides a MIPI DSI interface to 40 the host and has a built-in LED backlight. 41 42config DRM_PANEL_BOE_TV101WUM_NL6 43 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 44 depends on OF 45 depends on DRM_MIPI_DSI 46 depends on BACKLIGHT_CLASS_DEVICE 47 help 48 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 49 45NA WUXGA PANEL DSI Video Mode panel 50 51config DRM_PANEL_LVDS 52 tristate "Generic LVDS panel driver" 53 depends on OF 54 depends on BACKLIGHT_CLASS_DEVICE 55 select VIDEOMODE_HELPERS 56 help 57 This driver supports LVDS panels that don't require device-specific 58 handling of power supplies or control signals. It implements automatic 59 backlight handling if the panel is attached to a backlight controller. 60 61config DRM_PANEL_SIMPLE 62 tristate "support for simple panels" 63 depends on OF 64 depends on BACKLIGHT_CLASS_DEVICE 65 select VIDEOMODE_HELPERS 66 help 67 DRM panel driver for dumb panels that need at most a regulator and 68 a GPIO to be powered up. Optionally a backlight can be attached so 69 that it can be automatically turned off when the panel goes into a 70 low power state. 71 72config DRM_PANEL_ELIDA_KD35T133 73 tristate "Elida KD35T133 panel driver" 74 depends on OF 75 depends on DRM_MIPI_DSI 76 depends on BACKLIGHT_CLASS_DEVICE 77 help 78 Say Y here if you want to enable support for the Elida 79 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 80 system interfaces. 81 82config DRM_PANEL_FEIXIN_K101_IM2BA02 83 tristate "Feixin K101 IM2BA02 panel" 84 depends on OF 85 depends on DRM_MIPI_DSI 86 depends on BACKLIGHT_CLASS_DEVICE 87 help 88 Say Y here if you want to enable support for the Feixin K101 IM2BA02 89 4-lane 800x1280 MIPI DSI panel. 90 91config DRM_PANEL_FEIYANG_FY07024DI26A30D 92 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 93 depends on OF 94 depends on DRM_MIPI_DSI 95 depends on BACKLIGHT_CLASS_DEVICE 96 help 97 Say Y if you want to enable support for panels based on the 98 Feiyang FY07024DI26A30-D MIPI-DSI interface. 99 100config DRM_PANEL_ILITEK_IL9322 101 tristate "Ilitek ILI9322 320x240 QVGA panels" 102 depends on OF && SPI 103 select REGMAP 104 help 105 Say Y here if you want to enable support for Ilitek IL9322 106 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 107 108config DRM_PANEL_ILITEK_ILI9881C 109 tristate "Ilitek ILI9881C-based panels" 110 depends on OF 111 depends on DRM_MIPI_DSI 112 depends on BACKLIGHT_CLASS_DEVICE 113 help 114 Say Y if you want to enable support for panels based on the 115 Ilitek ILI9881c controller. 116 117config DRM_PANEL_INNOLUX_P079ZCA 118 tristate "Innolux P079ZCA panel" 119 depends on OF 120 depends on DRM_MIPI_DSI 121 depends on BACKLIGHT_CLASS_DEVICE 122 help 123 Say Y here if you want to enable support for Innolux P079ZCA 124 TFT-LCD modules. The panel has a 1024x768 resolution and uses 125 24 bit RGB per pixel. It provides a MIPI DSI interface to 126 the host and has a built-in LED backlight. 127 128config DRM_PANEL_JDI_LT070ME05000 129 tristate "JDI LT070ME05000 WUXGA DSI panel" 130 depends on OF 131 depends on DRM_MIPI_DSI 132 depends on BACKLIGHT_CLASS_DEVICE 133 help 134 Say Y here if you want to enable support for JDI DSI video mode 135 panel as found in Google Nexus 7 (2013) devices. 136 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 137 24 bit per pixel. 138 139config DRM_PANEL_KINGDISPLAY_KD097D04 140 tristate "Kingdisplay kd097d04 panel" 141 depends on OF 142 depends on DRM_MIPI_DSI 143 depends on BACKLIGHT_CLASS_DEVICE 144 help 145 Say Y here if you want to enable support for Kingdisplay kd097d04 146 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 147 24 bit RGB per pixel. It provides a MIPI DSI interface to 148 the host and has a built-in LED backlight. 149 150config DRM_PANEL_LEADTEK_LTK050H3146W 151 tristate "Leadtek LTK050H3146W panel" 152 depends on OF 153 depends on DRM_MIPI_DSI 154 depends on BACKLIGHT_CLASS_DEVICE 155 help 156 Say Y here if you want to enable support for Leadtek LTK050H3146W 157 TFT-LCD modules. The panel has a 720x1280 resolution and uses 158 24 bit RGB per pixel. It provides a MIPI DSI interface to 159 the host and has a built-in LED backlight. 160 161config DRM_PANEL_LEADTEK_LTK500HD1829 162 tristate "Leadtek LTK500HD1829 panel" 163 depends on OF 164 depends on DRM_MIPI_DSI 165 depends on BACKLIGHT_CLASS_DEVICE 166 help 167 Say Y here if you want to enable support for Kingdisplay kd097d04 168 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 169 24 bit RGB per pixel. It provides a MIPI DSI interface to 170 the host and has a built-in LED backlight. 171 172config DRM_PANEL_SAMSUNG_LD9040 173 tristate "Samsung LD9040 RGB/SPI panel" 174 depends on OF && SPI 175 select VIDEOMODE_HELPERS 176 177config DRM_PANEL_LG_LB035Q02 178 tristate "LG LB035Q024573 RGB panel" 179 depends on GPIOLIB && OF && SPI 180 help 181 Say Y here if you want to enable support for the LB035Q02 RGB panel 182 (found on the Gumstix Overo Palo35 board). To compile this driver as 183 a module, choose M here. 184 185config DRM_PANEL_LG_LG4573 186 tristate "LG4573 RGB/SPI panel" 187 depends on OF && SPI 188 select VIDEOMODE_HELPERS 189 help 190 Say Y here if you want to enable support for LG4573 RGB panel. 191 To compile this driver as a module, choose M here. 192 193config DRM_PANEL_NEC_NL8048HL11 194 tristate "NEC NL8048HL11 RGB panel" 195 depends on GPIOLIB && OF && SPI 196 help 197 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 198 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 199 as a module, choose M here. 200 201config DRM_PANEL_NOVATEK_NT35510 202 tristate "Novatek NT35510 RGB panel driver" 203 depends on OF 204 depends on DRM_MIPI_DSI 205 depends on BACKLIGHT_CLASS_DEVICE 206 help 207 Say Y here if you want to enable support for the panels built 208 around the Novatek NT35510 display controller, such as some 209 Hydis panels. 210 211config DRM_PANEL_NOVATEK_NT36672A 212 tristate "Novatek NT36672A DSI panel" 213 depends on OF 214 depends on DRM_MIPI_DSI 215 depends on BACKLIGHT_CLASS_DEVICE 216 help 217 Say Y here if you want to enable support for the panels built 218 around the Novatek NT36672A display controller, such as some 219 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 220 221config DRM_PANEL_NOVATEK_NT39016 222 tristate "Novatek NT39016 RGB/SPI panel" 223 depends on OF && SPI 224 depends on BACKLIGHT_CLASS_DEVICE 225 select REGMAP_SPI 226 help 227 Say Y here if you want to enable support for the panels built 228 around the Novatek NT39016 display controller. 229 230config DRM_PANEL_MANTIX_MLAF057WE51 231 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 232 depends on OF 233 depends on DRM_MIPI_DSI 234 depends on BACKLIGHT_CLASS_DEVICE 235 help 236 Say Y here if you want to enable support for the Mantix 237 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 238 has a resolution of 720x1440 pixels, a built in backlight and touch 239 controller. 240 241config DRM_PANEL_OLIMEX_LCD_OLINUXINO 242 tristate "Olimex LCD-OLinuXino panel" 243 depends on OF 244 depends on I2C 245 depends on BACKLIGHT_CLASS_DEVICE 246 help 247 The panel is used with different sizes LCDs, from 480x272 to 248 1280x800, and 24 bit per pixel. 249 250 Say Y here if you want to enable support for Olimex Ltd. 251 LCD-OLinuXino panel. 252 253config DRM_PANEL_ORISETECH_OTM8009A 254 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 255 depends on OF 256 depends on DRM_MIPI_DSI 257 depends on BACKLIGHT_CLASS_DEVICE 258 help 259 Say Y here if you want to enable support for Orise Technology 260 otm8009a 480x800 dsi 2dl panel. 261 262config DRM_PANEL_OSD_OSD101T2587_53TS 263 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 264 depends on OF 265 depends on DRM_MIPI_DSI 266 depends on BACKLIGHT_CLASS_DEVICE 267 help 268 Say Y here if you want to enable support for One Stop Displays 269 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 270 271config DRM_PANEL_PANASONIC_VVX10F034N00 272 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 273 depends on OF 274 depends on DRM_MIPI_DSI 275 depends on BACKLIGHT_CLASS_DEVICE 276 help 277 Say Y here if you want to enable support for Panasonic VVX10F034N00 278 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 279 Xperia Z2 tablets 280 281config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 282 tristate "Raspberry Pi 7-inch touchscreen panel" 283 depends on DRM_MIPI_DSI 284 help 285 Say Y here if you want to enable support for the Raspberry 286 Pi 7" Touchscreen. To compile this driver as a module, 287 choose M here. 288 289config DRM_PANEL_RAYDIUM_RM67191 290 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 291 depends on OF 292 depends on DRM_MIPI_DSI 293 depends on BACKLIGHT_CLASS_DEVICE 294 help 295 Say Y here if you want to enable support for Raydium RM67191 FHD 296 (1080x1920) DSI panel. 297 298config DRM_PANEL_RAYDIUM_RM68200 299 tristate "Raydium RM68200 720x1280 DSI video mode panel" 300 depends on OF 301 depends on DRM_MIPI_DSI 302 depends on BACKLIGHT_CLASS_DEVICE 303 help 304 Say Y here if you want to enable support for Raydium RM68200 305 720x1280 DSI video mode panel. 306 307config DRM_PANEL_RONBO_RB070D30 308 tristate "Ronbo Electronics RB070D30 panel" 309 depends on OF 310 depends on DRM_MIPI_DSI 311 depends on BACKLIGHT_CLASS_DEVICE 312 help 313 Say Y here if you want to enable support for Ronbo Electronics 314 RB070D30 1024x600 DSI panel. 315 316config DRM_PANEL_SAMSUNG_S6D16D0 317 tristate "Samsung S6D16D0 DSI video mode panel" 318 depends on OF 319 depends on DRM_MIPI_DSI 320 select VIDEOMODE_HELPERS 321 322config DRM_PANEL_SAMSUNG_S6E3HA2 323 tristate "Samsung S6E3HA2 DSI video mode panel" 324 depends on OF 325 depends on DRM_MIPI_DSI 326 depends on BACKLIGHT_CLASS_DEVICE 327 select VIDEOMODE_HELPERS 328 329config DRM_PANEL_SAMSUNG_S6E63J0X03 330 tristate "Samsung S6E63J0X03 DSI command mode panel" 331 depends on OF 332 depends on DRM_MIPI_DSI 333 depends on BACKLIGHT_CLASS_DEVICE 334 select VIDEOMODE_HELPERS 335 336config DRM_PANEL_SAMSUNG_S6E63M0 337 tristate "Samsung S6E63M0 RGB panel" 338 depends on OF 339 depends on BACKLIGHT_CLASS_DEVICE 340 help 341 Say Y here if you want to enable support for Samsung S6E63M0 342 AMOLED LCD panel. This panel can be accessed using SPI or 343 DSI. 344 345config DRM_PANEL_SAMSUNG_S6E63M0_SPI 346 tristate "Samsung S6E63M0 RGB SPI interface" 347 depends on SPI 348 depends on DRM_PANEL_SAMSUNG_S6E63M0 349 default DRM_PANEL_SAMSUNG_S6E63M0 350 help 351 Say Y here if you want to be able to access the Samsung 352 S6E63M0 panel using SPI. 353 354config DRM_PANEL_SAMSUNG_S6E63M0_DSI 355 tristate "Samsung S6E63M0 RGB DSI interface" 356 depends on DRM_MIPI_DSI 357 depends on DRM_PANEL_SAMSUNG_S6E63M0 358 help 359 Say Y here if you want to be able to access the Samsung 360 S6E63M0 panel using DSI. 361 362config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 363 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 364 depends on OF 365 select DRM_MIPI_DSI 366 select VIDEOMODE_HELPERS 367 368config DRM_PANEL_SAMSUNG_S6E8AA0 369 tristate "Samsung S6E8AA0 DSI video mode panel" 370 depends on OF 371 select DRM_MIPI_DSI 372 select VIDEOMODE_HELPERS 373 374config DRM_PANEL_SEIKO_43WVF1G 375 tristate "Seiko 43WVF1G panel" 376 depends on OF 377 depends on BACKLIGHT_CLASS_DEVICE 378 select VIDEOMODE_HELPERS 379 help 380 Say Y here if you want to enable support for the Seiko 381 43WVF1G controller for 800x480 LCD panels 382 383config DRM_PANEL_SHARP_LQ101R1SX01 384 tristate "Sharp LQ101R1SX01 panel" 385 depends on OF 386 depends on DRM_MIPI_DSI 387 depends on BACKLIGHT_CLASS_DEVICE 388 help 389 Say Y here if you want to enable support for Sharp LQ101R1SX01 390 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 391 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 392 the host and has a built-in LED backlight. 393 394 To compile this driver as a module, choose M here: the module 395 will be called panel-sharp-lq101r1sx01. 396 397config DRM_PANEL_SHARP_LS037V7DW01 398 tristate "Sharp LS037V7DW01 VGA LCD panel" 399 depends on GPIOLIB && OF && REGULATOR 400 help 401 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 402 (480x640) LCD panel (found on the TI SDP3430 board). 403 404config DRM_PANEL_SHARP_LS043T1LE01 405 tristate "Sharp LS043T1LE01 qHD video mode panel" 406 depends on OF 407 depends on DRM_MIPI_DSI 408 depends on BACKLIGHT_CLASS_DEVICE 409 help 410 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 411 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 412 413config DRM_PANEL_SITRONIX_ST7701 414 tristate "Sitronix ST7701 panel driver" 415 depends on OF 416 depends on DRM_MIPI_DSI 417 depends on BACKLIGHT_CLASS_DEVICE 418 help 419 Say Y here if you want to enable support for the Sitronix 420 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 421 system interfaces. 422 423config DRM_PANEL_SITRONIX_ST7703 424 tristate "Sitronix ST7703 based MIPI touchscreen panels" 425 depends on OF 426 depends on DRM_MIPI_DSI 427 depends on BACKLIGHT_CLASS_DEVICE 428 help 429 Say Y here if you want to enable support for Sitronix ST7703 based 430 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 431 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 432 in backlight and touch controller. 433 Touch input support is provided by the goodix driver and needs to be 434 selected separately. 435 436config DRM_PANEL_SITRONIX_ST7789V 437 tristate "Sitronix ST7789V panel" 438 depends on OF && SPI 439 depends on BACKLIGHT_CLASS_DEVICE 440 help 441 Say Y here if you want to enable support for the Sitronix 442 ST7789V controller for 240x320 LCD panels 443 444config DRM_PANEL_SONY_ACX424AKP 445 tristate "Sony ACX424AKP DSI command mode panel" 446 depends on OF 447 depends on DRM_MIPI_DSI 448 depends on BACKLIGHT_CLASS_DEVICE 449 select VIDEOMODE_HELPERS 450 help 451 Say Y here if you want to enable the Sony ACX424 display 452 panel. This panel supports DSI in both command and video 453 mode. 454 455config DRM_PANEL_SONY_ACX565AKM 456 tristate "Sony ACX565AKM panel" 457 depends on GPIOLIB && OF && SPI 458 depends on BACKLIGHT_CLASS_DEVICE 459 help 460 Say Y here if you want to enable support for the Sony ACX565AKM 461 800x600 3.5" panel (found on the Nokia N900). 462 463config DRM_PANEL_TDO_TL070WSH30 464 tristate "TDO TL070WSH30 DSI panel" 465 depends on OF 466 depends on DRM_MIPI_DSI 467 depends on BACKLIGHT_CLASS_DEVICE 468 help 469 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 470 panel module. The panel has a 1024×600 resolution and uses 471 24 bit RGB per pixel. It provides a MIPI DSI interface to 472 the host, a built-in LED backlight and touch controller. 473 474config DRM_PANEL_TPO_TD028TTEC1 475 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 476 depends on OF && SPI 477 depends on BACKLIGHT_CLASS_DEVICE 478 help 479 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 480 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 481 482config DRM_PANEL_TPO_TD043MTEA1 483 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 484 depends on GPIOLIB && OF && REGULATOR && SPI 485 help 486 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 487 4.3" panel (found on the OMAP3 Pandora board). 488 489config DRM_PANEL_TPO_TPG110 490 tristate "TPO TPG 800x400 panel" 491 depends on OF && SPI && GPIOLIB 492 depends on BACKLIGHT_CLASS_DEVICE 493 help 494 Say Y here if you want to enable support for TPO TPG110 495 400CH LTPS TFT LCD Single Chip Digital Driver for up to 496 800x400 LCD panels. 497 498config DRM_PANEL_TRULY_NT35597_WQXGA 499 tristate "Truly WQXGA" 500 depends on OF 501 depends on DRM_MIPI_DSI 502 help 503 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 504 Video Mode panel 505 506config DRM_PANEL_VISIONOX_RM69299 507 tristate "Visionox RM69299" 508 depends on OF 509 depends on DRM_MIPI_DSI 510 help 511 Say Y here if you want to enable support for Visionox 512 RM69299 DSI Video Mode panel. 513 514config DRM_PANEL_XINPENG_XPP055C272 515 tristate "Xinpeng XPP055C272 panel driver" 516 depends on OF 517 depends on DRM_MIPI_DSI 518 depends on BACKLIGHT_CLASS_DEVICE 519 help 520 Say Y here if you want to enable support for the Xinpeng 521 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 522 system interfaces. 523endmenu 524