xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision 1fd02f66) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_BOE_BF060Y8M_AJ0
41	tristate "Boe BF060Y8M-AJ0 panel"
42	depends on OF
43	depends on DRM_MIPI_DSI
44	depends on BACKLIGHT_CLASS_DEVICE
45	help
46	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
47	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
48	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
49	  the host and backlight is controlled through DSI commands.
50
51config DRM_PANEL_BOE_HIMAX8279D
52	tristate "Boe Himax8279d panel"
53	depends on OF
54	depends on DRM_MIPI_DSI
55	depends on BACKLIGHT_CLASS_DEVICE
56	help
57	  Say Y here if you want to enable support for Boe Himax8279d
58	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
59	  24 bit RGB per pixel. It provides a MIPI DSI interface to
60	  the host and has a built-in LED backlight.
61
62config DRM_PANEL_BOE_TV101WUM_NL6
63	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
64	depends on OF
65	depends on DRM_MIPI_DSI
66	depends on BACKLIGHT_CLASS_DEVICE
67	help
68	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
69	  45NA WUXGA PANEL DSI Video Mode panel
70
71config DRM_PANEL_DSI_CM
72	tristate "Generic DSI command mode panels"
73	depends on OF
74	depends on DRM_MIPI_DSI
75	depends on BACKLIGHT_CLASS_DEVICE
76	help
77	  DRM panel driver for DSI command mode panels with support for
78	  embedded and external backlights.
79
80config DRM_PANEL_LVDS
81	tristate "Generic LVDS panel driver"
82	depends on OF
83	depends on BACKLIGHT_CLASS_DEVICE
84	select VIDEOMODE_HELPERS
85	help
86	  This driver supports LVDS panels that don't require device-specific
87	  handling of power supplies or control signals. It implements automatic
88	  backlight handling if the panel is attached to a backlight controller.
89
90config DRM_PANEL_SIMPLE
91	tristate "support for simple panels (other than eDP ones)"
92	depends on OF
93	depends on BACKLIGHT_CLASS_DEVICE
94	depends on PM
95	select VIDEOMODE_HELPERS
96	help
97	  DRM panel driver for dumb non-eDP panels that need at most a regulator
98	  and a GPIO to be powered up. Optionally a backlight can be attached so
99	  that it can be automatically turned off when the panel goes into a
100	  low power state.
101
102config DRM_PANEL_EDP
103	tristate "support for simple Embedded DisplayPort panels"
104	depends on OF
105	depends on BACKLIGHT_CLASS_DEVICE
106	depends on PM
107	select VIDEOMODE_HELPERS
108	select DRM_DP_AUX_BUS
109	select DRM_DP_HELPER
110	select DRM_KMS_HELPER
111	help
112	  DRM panel driver for dumb eDP panels that need at most a regulator and
113	  a GPIO to be powered up. Optionally a backlight can be attached so
114	  that it can be automatically turned off when the panel goes into a
115	  low power state.
116
117config DRM_PANEL_ELIDA_KD35T133
118	tristate "Elida KD35T133 panel driver"
119	depends on OF
120	depends on DRM_MIPI_DSI
121	depends on BACKLIGHT_CLASS_DEVICE
122	help
123	  Say Y here if you want to enable support for the Elida
124	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
125	  system interfaces.
126
127config DRM_PANEL_FEIXIN_K101_IM2BA02
128	tristate "Feixin K101 IM2BA02 panel"
129	depends on OF
130	depends on DRM_MIPI_DSI
131	depends on BACKLIGHT_CLASS_DEVICE
132	help
133	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
134	  4-lane 800x1280 MIPI DSI panel.
135
136config DRM_PANEL_FEIYANG_FY07024DI26A30D
137	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
138	depends on OF
139	depends on DRM_MIPI_DSI
140	depends on BACKLIGHT_CLASS_DEVICE
141	help
142	  Say Y if you want to enable support for panels based on the
143	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
144
145config DRM_PANEL_ILITEK_IL9322
146	tristate "Ilitek ILI9322 320x240 QVGA panels"
147	depends on OF && SPI
148	select REGMAP
149	help
150	  Say Y here if you want to enable support for Ilitek IL9322
151	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
152
153config DRM_PANEL_ILITEK_ILI9341
154	tristate "Ilitek ILI9341 240x320 QVGA panels"
155	depends on OF && SPI
156	depends on DRM_KMS_HELPER
157	depends on DRM_GEM_CMA_HELPER
158	depends on BACKLIGHT_CLASS_DEVICE
159	select DRM_MIPI_DBI
160	help
161	  Say Y here if you want to enable support for Ilitek IL9341
162	  QVGA (240x320) RGB panels. support serial & parallel rgb
163	  interface.
164
165config DRM_PANEL_ILITEK_ILI9881C
166	tristate "Ilitek ILI9881C-based panels"
167	depends on OF
168	depends on DRM_MIPI_DSI
169	depends on BACKLIGHT_CLASS_DEVICE
170	help
171	  Say Y if you want to enable support for panels based on the
172	  Ilitek ILI9881c controller.
173
174config DRM_PANEL_INNOLUX_EJ030NA
175        tristate "Innolux EJ030NA 320x480 LCD panel"
176        depends on OF && SPI
177        select REGMAP_SPI
178        help
179          Say Y here to enable support for the Innolux/Chimei EJ030NA
180          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
181          and LDK handheld gaming consoles.
182
183config DRM_PANEL_INNOLUX_P079ZCA
184	tristate "Innolux P079ZCA panel"
185	depends on OF
186	depends on DRM_MIPI_DSI
187	depends on BACKLIGHT_CLASS_DEVICE
188	help
189	  Say Y here if you want to enable support for Innolux P079ZCA
190	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
191	  24 bit RGB per pixel. It provides a MIPI DSI interface to
192	  the host and has a built-in LED backlight.
193
194config DRM_PANEL_JDI_LT070ME05000
195	tristate "JDI LT070ME05000 WUXGA DSI panel"
196	depends on OF
197	depends on DRM_MIPI_DSI
198	depends on BACKLIGHT_CLASS_DEVICE
199	help
200	  Say Y here if you want to enable support for JDI DSI video mode
201	  panel as found in Google Nexus 7 (2013) devices.
202	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
203	  24 bit per pixel.
204
205config DRM_PANEL_JDI_R63452
206	tristate "JDI R63452 Full HD DSI panel"
207	depends on OF
208	depends on DRM_MIPI_DSI
209	depends on BACKLIGHT_CLASS_DEVICE
210	help
211	  Say Y here if you want to enable support for the JDI R63452
212	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
213
214config DRM_PANEL_KHADAS_TS050
215	tristate "Khadas TS050 panel"
216	depends on OF
217	depends on DRM_MIPI_DSI
218	depends on BACKLIGHT_CLASS_DEVICE
219	help
220	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
221	  panel module. The panel has a 1080x1920 resolution and uses
222	  24 bit RGB per pixel. It provides a MIPI DSI interface to
223	  the host, a built-in LED backlight and touch controller.
224
225config DRM_PANEL_KINGDISPLAY_KD097D04
226	tristate "Kingdisplay kd097d04 panel"
227	depends on OF
228	depends on DRM_MIPI_DSI
229	depends on BACKLIGHT_CLASS_DEVICE
230	help
231	  Say Y here if you want to enable support for Kingdisplay kd097d04
232	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
233	  24 bit RGB per pixel. It provides a MIPI DSI interface to
234	  the host and has a built-in LED backlight.
235
236config DRM_PANEL_LEADTEK_LTK050H3146W
237	tristate "Leadtek LTK050H3146W panel"
238	depends on OF
239	depends on DRM_MIPI_DSI
240	depends on BACKLIGHT_CLASS_DEVICE
241	help
242	  Say Y here if you want to enable support for Leadtek LTK050H3146W
243	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
244	  24 bit RGB per pixel. It provides a MIPI DSI interface to
245	  the host and has a built-in LED backlight.
246
247config DRM_PANEL_LEADTEK_LTK500HD1829
248	tristate "Leadtek LTK500HD1829 panel"
249	depends on OF
250	depends on DRM_MIPI_DSI
251	depends on BACKLIGHT_CLASS_DEVICE
252	help
253	  Say Y here if you want to enable support for Kingdisplay kd097d04
254	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
255	  24 bit RGB per pixel. It provides a MIPI DSI interface to
256	  the host and has a built-in LED backlight.
257
258config DRM_PANEL_SAMSUNG_LD9040
259	tristate "Samsung LD9040 RGB/SPI panel"
260	depends on OF && SPI
261	select VIDEOMODE_HELPERS
262
263config DRM_PANEL_LG_LB035Q02
264	tristate "LG LB035Q024573 RGB panel"
265	depends on GPIOLIB && OF && SPI
266	help
267	  Say Y here if you want to enable support for the LB035Q02 RGB panel
268	  (found on the Gumstix Overo Palo35 board). To compile this driver as
269	  a module, choose M here.
270
271config DRM_PANEL_LG_LG4573
272	tristate "LG4573 RGB/SPI panel"
273	depends on OF && SPI
274	select VIDEOMODE_HELPERS
275	help
276	  Say Y here if you want to enable support for LG4573 RGB panel.
277	  To compile this driver as a module, choose M here.
278
279config DRM_PANEL_NEC_NL8048HL11
280	tristate "NEC NL8048HL11 RGB panel"
281	depends on GPIOLIB && OF && SPI
282	help
283	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
284	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
285	  as a module, choose M here.
286
287config DRM_PANEL_NOVATEK_NT35510
288	tristate "Novatek NT35510 RGB panel driver"
289	depends on OF
290	depends on DRM_MIPI_DSI
291	depends on BACKLIGHT_CLASS_DEVICE
292	help
293	  Say Y here if you want to enable support for the panels built
294	  around the Novatek NT35510 display controller, such as some
295	  Hydis panels.
296
297config DRM_PANEL_NOVATEK_NT35560
298	tristate "Novatek NT35560 DSI command mode panel"
299	depends on OF
300	depends on DRM_MIPI_DSI
301	depends on BACKLIGHT_CLASS_DEVICE
302	select VIDEOMODE_HELPERS
303	help
304	  Say Y here if you want to enable the Novatek NT35560 display
305	  controller. This panel supports DSI in both command and video
306	  mode. This supports several panels such as Sony ACX424AKM and
307	  ACX424AKP.
308
309config DRM_PANEL_NOVATEK_NT35950
310	tristate "Novatek NT35950 DSI panel"
311	depends on OF
312	depends on DRM_MIPI_DSI
313	depends on BACKLIGHT_CLASS_DEVICE
314	help
315	  Say Y here if you want to enable support for the panels built
316	  around the Novatek NT35950 display controller, such as some
317	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
318	  mobile phones.
319
320config DRM_PANEL_NOVATEK_NT36672A
321	tristate "Novatek NT36672A DSI panel"
322	depends on OF
323	depends on DRM_MIPI_DSI
324	depends on BACKLIGHT_CLASS_DEVICE
325	help
326	  Say Y here if you want to enable support for the panels built
327	  around the Novatek NT36672A display controller, such as some
328	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
329
330config DRM_PANEL_NOVATEK_NT39016
331	tristate "Novatek NT39016 RGB/SPI panel"
332	depends on OF && SPI
333	depends on BACKLIGHT_CLASS_DEVICE
334	select REGMAP_SPI
335	help
336	  Say Y here if you want to enable support for the panels built
337	  around the Novatek NT39016 display controller.
338
339config DRM_PANEL_MANTIX_MLAF057WE51
340	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
341	depends on OF
342	depends on DRM_MIPI_DSI
343	depends on BACKLIGHT_CLASS_DEVICE
344	help
345	  Say Y here if you want to enable support for the Mantix
346	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
347	  has a resolution of 720x1440 pixels, a built in backlight and touch
348	  controller.
349
350config DRM_PANEL_OLIMEX_LCD_OLINUXINO
351	tristate "Olimex LCD-OLinuXino panel"
352	depends on OF
353	depends on I2C
354	depends on BACKLIGHT_CLASS_DEVICE
355	select CRC32
356	help
357	  The panel is used with different sizes LCDs, from 480x272 to
358	  1280x800, and 24 bit per pixel.
359
360	  Say Y here if you want to enable support for Olimex Ltd.
361	  LCD-OLinuXino panel.
362
363config DRM_PANEL_ORISETECH_OTM8009A
364	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
365	depends on OF
366	depends on DRM_MIPI_DSI
367	depends on BACKLIGHT_CLASS_DEVICE
368	help
369	  Say Y here if you want to enable support for Orise Technology
370	  otm8009a 480x800 dsi 2dl panel.
371
372config DRM_PANEL_OSD_OSD101T2587_53TS
373	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
374	depends on OF
375	depends on DRM_MIPI_DSI
376	depends on BACKLIGHT_CLASS_DEVICE
377	help
378	  Say Y here if you want to enable support for One Stop Displays
379	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
380
381config DRM_PANEL_PANASONIC_VVX10F034N00
382	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
383	depends on OF
384	depends on DRM_MIPI_DSI
385	depends on BACKLIGHT_CLASS_DEVICE
386	help
387	  Say Y here if you want to enable support for Panasonic VVX10F034N00
388	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
389	  Xperia Z2 tablets
390
391config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
392	tristate "Raspberry Pi 7-inch touchscreen panel"
393	depends on DRM_MIPI_DSI
394	help
395	  Say Y here if you want to enable support for the Raspberry
396	  Pi 7" Touchscreen.  To compile this driver as a module,
397	  choose M here.
398
399config DRM_PANEL_RAYDIUM_RM67191
400	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
401	depends on OF
402	depends on DRM_MIPI_DSI
403	depends on BACKLIGHT_CLASS_DEVICE
404	help
405	  Say Y here if you want to enable support for Raydium RM67191 FHD
406	  (1080x1920) DSI panel.
407
408config DRM_PANEL_RAYDIUM_RM68200
409	tristate "Raydium RM68200 720x1280 DSI video mode panel"
410	depends on OF
411	depends on DRM_MIPI_DSI
412	depends on BACKLIGHT_CLASS_DEVICE
413	help
414	  Say Y here if you want to enable support for Raydium RM68200
415	  720x1280 DSI video mode panel.
416
417config DRM_PANEL_RONBO_RB070D30
418	tristate "Ronbo Electronics RB070D30 panel"
419	depends on OF
420	depends on DRM_MIPI_DSI
421	depends on BACKLIGHT_CLASS_DEVICE
422	help
423	  Say Y here if you want to enable support for Ronbo Electronics
424	  RB070D30 1024x600 DSI panel.
425
426config DRM_PANEL_SAMSUNG_ATNA33XC20
427	tristate "Samsung ATNA33XC20 eDP panel"
428	depends on OF
429	depends on BACKLIGHT_CLASS_DEVICE
430	depends on PM
431	select DRM_DP_AUX_BUS
432	help
433	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
434	  be handled by the DRM_PANEL_SIMPLE driver because its power
435	  sequencing is non-standard.
436
437config DRM_PANEL_SAMSUNG_DB7430
438	tristate "Samsung DB7430-based DPI panels"
439	depends on OF && SPI && GPIOLIB
440	depends on BACKLIGHT_CLASS_DEVICE
441	select DRM_MIPI_DBI
442	help
443	  Say Y here if you want to enable support for the Samsung
444	  DB7430 DPI display controller used in such devices as the
445	  LMS397KF04 480x800 DPI panel.
446
447config DRM_PANEL_SAMSUNG_S6D16D0
448	tristate "Samsung S6D16D0 DSI video mode panel"
449	depends on OF
450	depends on DRM_MIPI_DSI
451	select VIDEOMODE_HELPERS
452
453config DRM_PANEL_SAMSUNG_S6D27A1
454	tristate "Samsung S6D27A1 DPI panel driver"
455	depends on OF && SPI && GPIOLIB
456	select DRM_MIPI_DBI
457	help
458	  Say Y here if you want to enable support for the Samsung
459	  S6D27A1 DPI 480x800 panel.
460
461	  This panel can be found in Samsung Galaxy Ace 2
462	  GT-I8160 mobile phone.
463
464config DRM_PANEL_SAMSUNG_S6E3HA2
465	tristate "Samsung S6E3HA2 DSI video mode panel"
466	depends on OF
467	depends on DRM_MIPI_DSI
468	depends on BACKLIGHT_CLASS_DEVICE
469	select VIDEOMODE_HELPERS
470
471config DRM_PANEL_SAMSUNG_S6E63J0X03
472	tristate "Samsung S6E63J0X03 DSI command mode panel"
473	depends on OF
474	depends on DRM_MIPI_DSI
475	depends on BACKLIGHT_CLASS_DEVICE
476	select VIDEOMODE_HELPERS
477
478config DRM_PANEL_SAMSUNG_S6E63M0
479	tristate "Samsung S6E63M0 RGB panel"
480	depends on OF
481	depends on BACKLIGHT_CLASS_DEVICE
482	help
483	  Say Y here if you want to enable support for Samsung S6E63M0
484	  AMOLED LCD panel. This panel can be accessed using SPI or
485	  DSI.
486
487config DRM_PANEL_SAMSUNG_S6E63M0_SPI
488	tristate "Samsung S6E63M0 RGB SPI interface"
489	depends on SPI
490	depends on DRM_PANEL_SAMSUNG_S6E63M0
491	default DRM_PANEL_SAMSUNG_S6E63M0
492	select DRM_MIPI_DBI
493	help
494	  Say Y here if you want to be able to access the Samsung
495	  S6E63M0 panel using SPI.
496
497config DRM_PANEL_SAMSUNG_S6E63M0_DSI
498	tristate "Samsung S6E63M0 RGB DSI interface"
499	depends on DRM_MIPI_DSI
500	depends on DRM_PANEL_SAMSUNG_S6E63M0
501	help
502	  Say Y here if you want to be able to access the Samsung
503	  S6E63M0 panel using DSI.
504
505config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
506	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
507	depends on OF
508	select DRM_MIPI_DSI
509	select VIDEOMODE_HELPERS
510
511config DRM_PANEL_SAMSUNG_S6E8AA0
512	tristate "Samsung S6E8AA0 DSI video mode panel"
513	depends on OF
514	select DRM_MIPI_DSI
515	select VIDEOMODE_HELPERS
516
517config DRM_PANEL_SAMSUNG_SOFEF00
518	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
519	depends on OF
520	depends on DRM_MIPI_DSI
521	depends on BACKLIGHT_CLASS_DEVICE
522	select VIDEOMODE_HELPERS
523	help
524	  Say Y or M here if you want to enable support for the Samsung AMOLED
525	  command mode panels found in the OnePlus 6/6T smartphones.
526
527	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
528
529config DRM_PANEL_SEIKO_43WVF1G
530	tristate "Seiko 43WVF1G panel"
531	depends on OF
532	depends on BACKLIGHT_CLASS_DEVICE
533	select VIDEOMODE_HELPERS
534	help
535	  Say Y here if you want to enable support for the Seiko
536	  43WVF1G controller for 800x480 LCD panels
537
538config DRM_PANEL_SHARP_LQ101R1SX01
539	tristate "Sharp LQ101R1SX01 panel"
540	depends on OF
541	depends on DRM_MIPI_DSI
542	depends on BACKLIGHT_CLASS_DEVICE
543	help
544	  Say Y here if you want to enable support for Sharp LQ101R1SX01
545	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
546	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
547	  the host and has a built-in LED backlight.
548
549	  To compile this driver as a module, choose M here: the module
550	  will be called panel-sharp-lq101r1sx01.
551
552config DRM_PANEL_SHARP_LS037V7DW01
553	tristate "Sharp LS037V7DW01 VGA LCD panel"
554	depends on GPIOLIB && OF && REGULATOR
555	help
556	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
557	  (480x640) LCD panel (found on the TI SDP3430 board).
558
559config DRM_PANEL_SHARP_LS043T1LE01
560	tristate "Sharp LS043T1LE01 qHD video mode panel"
561	depends on OF
562	depends on DRM_MIPI_DSI
563	depends on BACKLIGHT_CLASS_DEVICE
564	help
565	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
566	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
567
568config DRM_PANEL_SHARP_LS060T1SX01
569	tristate "Sharp LS060T1SX01 FullHD video mode panel"
570	depends on OF
571	depends on DRM_MIPI_DSI
572	depends on BACKLIGHT_CLASS_DEVICE
573	help
574	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
575	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
576	  Bundle.
577
578config DRM_PANEL_SITRONIX_ST7701
579	tristate "Sitronix ST7701 panel driver"
580	depends on OF
581	depends on DRM_MIPI_DSI
582	depends on BACKLIGHT_CLASS_DEVICE
583	help
584	  Say Y here if you want to enable support for the Sitronix
585	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
586	  system interfaces.
587
588config DRM_PANEL_SITRONIX_ST7703
589	tristate "Sitronix ST7703 based MIPI touchscreen panels"
590	depends on OF
591	depends on DRM_MIPI_DSI
592	depends on BACKLIGHT_CLASS_DEVICE
593	help
594	  Say Y here if you want to enable support for Sitronix ST7703 based
595	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
596	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
597	  in backlight and touch controller.
598	  Touch input support is provided by the goodix driver and needs to be
599	  selected separately.
600
601config DRM_PANEL_SITRONIX_ST7789V
602	tristate "Sitronix ST7789V panel"
603	depends on OF && SPI
604	depends on BACKLIGHT_CLASS_DEVICE
605	help
606	  Say Y here if you want to enable support for the Sitronix
607	  ST7789V controller for 240x320 LCD panels
608
609config DRM_PANEL_SONY_ACX565AKM
610	tristate "Sony ACX565AKM panel"
611	depends on GPIOLIB && OF && SPI
612	depends on BACKLIGHT_CLASS_DEVICE
613	help
614	  Say Y here if you want to enable support for the Sony ACX565AKM
615	  800x600 3.5" panel (found on the Nokia N900).
616
617config DRM_PANEL_SONY_TULIP_TRULY_NT35521
618	tristate "Sony Tulip Truly NT35521 panel"
619	depends on GPIOLIB && OF
620	depends on DRM_MIPI_DSI
621	depends on BACKLIGHT_CLASS_DEVICE
622	help
623	  Say Y here if you want to enable support for the Sony Tulip
624	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
625	  Aqua phone.
626
627config DRM_PANEL_TDO_TL070WSH30
628	tristate "TDO TL070WSH30 DSI panel"
629	depends on OF
630	depends on DRM_MIPI_DSI
631	depends on BACKLIGHT_CLASS_DEVICE
632	help
633	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
634	  panel module. The panel has a 1024×600 resolution and uses
635	  24 bit RGB per pixel. It provides a MIPI DSI interface to
636	  the host, a built-in LED backlight and touch controller.
637
638config DRM_PANEL_TPO_TD028TTEC1
639	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
640	depends on OF && SPI
641	depends on BACKLIGHT_CLASS_DEVICE
642	help
643	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
644	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
645
646config DRM_PANEL_TPO_TD043MTEA1
647	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
648	depends on GPIOLIB && OF && REGULATOR && SPI
649	help
650	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
651	  4.3" panel (found on the OMAP3 Pandora board).
652
653config DRM_PANEL_TPO_TPG110
654	tristate "TPO TPG 800x400 panel"
655	depends on OF && SPI && GPIOLIB
656	depends on BACKLIGHT_CLASS_DEVICE
657	help
658	  Say Y here if you want to enable support for TPO TPG110
659	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
660	  800x400 LCD panels.
661
662config DRM_PANEL_TRULY_NT35597_WQXGA
663	tristate "Truly WQXGA"
664	depends on OF
665	depends on DRM_MIPI_DSI
666	help
667	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
668	  Video Mode panel
669
670config DRM_PANEL_VISIONOX_RM69299
671	tristate "Visionox RM69299"
672	depends on OF
673	depends on DRM_MIPI_DSI
674	help
675	  Say Y here if you want to enable support for Visionox
676	  RM69299  DSI Video Mode panel.
677
678config DRM_PANEL_WIDECHIPS_WS2401
679	tristate "Widechips WS2401 DPI panel driver"
680	depends on SPI && GPIOLIB
681	depends on BACKLIGHT_CLASS_DEVICE
682	select DRM_MIPI_DBI
683	help
684	  Say Y here if you want to enable support for the Widechips WS2401 DPI
685	  480x800 display controller used in panels such as Samsung LMS380KF01.
686	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
687
688config DRM_PANEL_XINPENG_XPP055C272
689	tristate "Xinpeng XPP055C272 panel driver"
690	depends on OF
691	depends on DRM_MIPI_DSI
692	depends on BACKLIGHT_CLASS_DEVICE
693	help
694	  Say Y here if you want to enable support for the Xinpeng
695	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
696	  system interfaces.
697endmenu
698