xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision 15e3ae36) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_BOE_HIMAX8279D
22	tristate "Boe Himax8279d panel"
23	depends on OF
24	depends on DRM_MIPI_DSI
25	depends on BACKLIGHT_CLASS_DEVICE
26	help
27	  Say Y here if you want to enable support for Boe Himax8279d
28	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
29	  24 bit RGB per pixel. It provides a MIPI DSI interface to
30	  the host and has a built-in LED backlight.
31
32config DRM_PANEL_BOE_TV101WUM_NL6
33	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
34	depends on OF
35	depends on DRM_MIPI_DSI
36	depends on BACKLIGHT_CLASS_DEVICE
37	help
38	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
39	  45NA WUXGA PANEL DSI Video Mode panel
40
41config DRM_PANEL_LVDS
42	tristate "Generic LVDS panel driver"
43	depends on OF
44	depends on BACKLIGHT_CLASS_DEVICE
45	select VIDEOMODE_HELPERS
46	help
47	  This driver supports LVDS panels that don't require device-specific
48	  handling of power supplies or control signals. It implements automatic
49	  backlight handling if the panel is attached to a backlight controller.
50
51config DRM_PANEL_SIMPLE
52	tristate "support for simple panels"
53	depends on OF
54	depends on BACKLIGHT_CLASS_DEVICE
55	select VIDEOMODE_HELPERS
56	help
57	  DRM panel driver for dumb panels that need at most a regulator and
58	  a GPIO to be powered up. Optionally a backlight can be attached so
59	  that it can be automatically turned off when the panel goes into a
60	  low power state.
61
62config DRM_PANEL_ELIDA_KD35T133
63	tristate "Elida KD35T133 panel driver"
64	depends on OF
65	depends on DRM_MIPI_DSI
66	depends on BACKLIGHT_CLASS_DEVICE
67	help
68	  Say Y here if you want to enable support for the Elida
69	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
70	  system interfaces.
71
72config DRM_PANEL_FEIXIN_K101_IM2BA02
73	tristate "Feixin K101 IM2BA02 panel"
74	depends on OF
75	depends on DRM_MIPI_DSI
76	depends on BACKLIGHT_CLASS_DEVICE
77	help
78	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
79	  4-lane 800x1280 MIPI DSI panel.
80
81config DRM_PANEL_FEIYANG_FY07024DI26A30D
82	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
83	depends on OF
84	depends on DRM_MIPI_DSI
85	depends on BACKLIGHT_CLASS_DEVICE
86	help
87	  Say Y if you want to enable support for panels based on the
88	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
89
90config DRM_PANEL_ILITEK_IL9322
91	tristate "Ilitek ILI9322 320x240 QVGA panels"
92	depends on OF && SPI
93	select REGMAP
94	help
95	  Say Y here if you want to enable support for Ilitek IL9322
96	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
97
98config DRM_PANEL_ILITEK_ILI9881C
99	tristate "Ilitek ILI9881C-based panels"
100	depends on OF
101	depends on DRM_MIPI_DSI
102	depends on BACKLIGHT_CLASS_DEVICE
103	help
104	  Say Y if you want to enable support for panels based on the
105	  Ilitek ILI9881c controller.
106
107config DRM_PANEL_INNOLUX_P079ZCA
108	tristate "Innolux P079ZCA panel"
109	depends on OF
110	depends on DRM_MIPI_DSI
111	depends on BACKLIGHT_CLASS_DEVICE
112	help
113	  Say Y here if you want to enable support for Innolux P079ZCA
114	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
115	  24 bit RGB per pixel. It provides a MIPI DSI interface to
116	  the host and has a built-in LED backlight.
117
118config DRM_PANEL_JDI_LT070ME05000
119	tristate "JDI LT070ME05000 WUXGA DSI panel"
120	depends on OF
121	depends on DRM_MIPI_DSI
122	depends on BACKLIGHT_CLASS_DEVICE
123	help
124	  Say Y here if you want to enable support for JDI DSI video mode
125	  panel as found in Google Nexus 7 (2013) devices.
126	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
127	  24 bit per pixel.
128
129config DRM_PANEL_KINGDISPLAY_KD097D04
130	tristate "Kingdisplay kd097d04 panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y here if you want to enable support for Kingdisplay kd097d04
136	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
137	  24 bit RGB per pixel. It provides a MIPI DSI interface to
138	  the host and has a built-in LED backlight.
139
140config DRM_PANEL_LEADTEK_LTK500HD1829
141	tristate "Leadtek LTK500HD1829 panel"
142	depends on OF
143	depends on DRM_MIPI_DSI
144	depends on BACKLIGHT_CLASS_DEVICE
145	help
146	  Say Y here if you want to enable support for Kingdisplay kd097d04
147	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
148	  24 bit RGB per pixel. It provides a MIPI DSI interface to
149	  the host and has a built-in LED backlight.
150
151config DRM_PANEL_SAMSUNG_LD9040
152	tristate "Samsung LD9040 RGB/SPI panel"
153	depends on OF && SPI
154	select VIDEOMODE_HELPERS
155
156config DRM_PANEL_LG_LB035Q02
157	tristate "LG LB035Q024573 RGB panel"
158	depends on GPIOLIB && OF && SPI
159	help
160	  Say Y here if you want to enable support for the LB035Q02 RGB panel
161	  (found on the Gumstix Overo Palo35 board). To compile this driver as
162	  a module, choose M here.
163
164config DRM_PANEL_LG_LG4573
165	tristate "LG4573 RGB/SPI panel"
166	depends on OF && SPI
167	select VIDEOMODE_HELPERS
168	help
169	  Say Y here if you want to enable support for LG4573 RGB panel.
170	  To compile this driver as a module, choose M here.
171
172config DRM_PANEL_NEC_NL8048HL11
173	tristate "NEC NL8048HL11 RGB panel"
174	depends on GPIOLIB && OF && SPI
175	help
176	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
177	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
178	  as a module, choose M here.
179
180config DRM_PANEL_NOVATEK_NT35510
181	tristate "Novatek NT35510 RGB panel driver"
182	depends on OF
183	depends on DRM_MIPI_DSI
184	depends on BACKLIGHT_CLASS_DEVICE
185	help
186	  Say Y here if you want to enable support for the panels built
187	  around the Novatek NT35510 display controller, such as some
188	  Hydis panels.
189
190config DRM_PANEL_NOVATEK_NT39016
191	tristate "Novatek NT39016 RGB/SPI panel"
192	depends on OF && SPI
193	depends on BACKLIGHT_CLASS_DEVICE
194	select REGMAP_SPI
195	help
196	  Say Y here if you want to enable support for the panels built
197	  around the Novatek NT39016 display controller.
198
199config DRM_PANEL_OLIMEX_LCD_OLINUXINO
200	tristate "Olimex LCD-OLinuXino panel"
201	depends on OF
202	depends on I2C
203	depends on BACKLIGHT_CLASS_DEVICE
204	help
205	  The panel is used with different sizes LCDs, from 480x272 to
206	  1280x800, and 24 bit per pixel.
207
208	  Say Y here if you want to enable support for Olimex Ltd.
209	  LCD-OLinuXino panel.
210
211config DRM_PANEL_ORISETECH_OTM8009A
212	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
213	depends on OF
214	depends on DRM_MIPI_DSI
215	depends on BACKLIGHT_CLASS_DEVICE
216	help
217	  Say Y here if you want to enable support for Orise Technology
218	  otm8009a 480x800 dsi 2dl panel.
219
220config DRM_PANEL_OSD_OSD101T2587_53TS
221	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
222	depends on OF
223	depends on DRM_MIPI_DSI
224	depends on BACKLIGHT_CLASS_DEVICE
225	help
226	  Say Y here if you want to enable support for One Stop Displays
227	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
228
229config DRM_PANEL_PANASONIC_VVX10F034N00
230	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
231	depends on OF
232	depends on DRM_MIPI_DSI
233	depends on BACKLIGHT_CLASS_DEVICE
234	help
235	  Say Y here if you want to enable support for Panasonic VVX10F034N00
236	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
237	  Xperia Z2 tablets
238
239config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
240	tristate "Raspberry Pi 7-inch touchscreen panel"
241	depends on DRM_MIPI_DSI
242	help
243	  Say Y here if you want to enable support for the Raspberry
244	  Pi 7" Touchscreen.  To compile this driver as a module,
245	  choose M here.
246
247config DRM_PANEL_RAYDIUM_RM67191
248	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
249	depends on OF
250	depends on DRM_MIPI_DSI
251	depends on BACKLIGHT_CLASS_DEVICE
252	help
253	  Say Y here if you want to enable support for Raydium RM67191 FHD
254	  (1080x1920) DSI panel.
255
256config DRM_PANEL_RAYDIUM_RM68200
257	tristate "Raydium RM68200 720x1280 DSI video mode panel"
258	depends on OF
259	depends on DRM_MIPI_DSI
260	depends on BACKLIGHT_CLASS_DEVICE
261	help
262	  Say Y here if you want to enable support for Raydium RM68200
263	  720x1280 DSI video mode panel.
264
265config DRM_PANEL_ROCKTECH_JH057N00900
266	tristate "Rocktech JH057N00900 MIPI touchscreen panel"
267	depends on OF
268	depends on DRM_MIPI_DSI
269	depends on BACKLIGHT_CLASS_DEVICE
270	help
271	  Say Y here if you want to enable support for Rocktech JH057N00900
272	  MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
273	  resolution of 720x1440 pixels, a built in backlight and touch
274	  controller.
275	  Touch input support is provided by the goodix driver and needs to be
276	  selected separately.
277
278config DRM_PANEL_RONBO_RB070D30
279	tristate "Ronbo Electronics RB070D30 panel"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y here if you want to enable support for Ronbo Electronics
285	  RB070D30 1024x600 DSI panel.
286
287config DRM_PANEL_SAMSUNG_S6D16D0
288	tristate "Samsung S6D16D0 DSI video mode panel"
289	depends on OF
290	depends on DRM_MIPI_DSI
291	select VIDEOMODE_HELPERS
292
293config DRM_PANEL_SAMSUNG_S6E3HA2
294	tristate "Samsung S6E3HA2 DSI video mode panel"
295	depends on OF
296	depends on DRM_MIPI_DSI
297	depends on BACKLIGHT_CLASS_DEVICE
298	select VIDEOMODE_HELPERS
299
300config DRM_PANEL_SAMSUNG_S6E63J0X03
301	tristate "Samsung S6E63J0X03 DSI command mode panel"
302	depends on OF
303	depends on DRM_MIPI_DSI
304	depends on BACKLIGHT_CLASS_DEVICE
305	select VIDEOMODE_HELPERS
306
307config DRM_PANEL_SAMSUNG_S6E63M0
308	tristate "Samsung S6E63M0 RGB/SPI panel"
309	depends on OF
310	depends on SPI
311	depends on BACKLIGHT_CLASS_DEVICE
312	help
313	  Say Y here if you want to enable support for Samsung S6E63M0
314	  AMOLED LCD panel.
315
316config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
317	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
318	depends on OF
319	select DRM_MIPI_DSI
320	select VIDEOMODE_HELPERS
321
322config DRM_PANEL_SAMSUNG_S6E8AA0
323	tristate "Samsung S6E8AA0 DSI video mode panel"
324	depends on OF
325	select DRM_MIPI_DSI
326	select VIDEOMODE_HELPERS
327
328config DRM_PANEL_SEIKO_43WVF1G
329	tristate "Seiko 43WVF1G panel"
330	depends on OF
331	depends on BACKLIGHT_CLASS_DEVICE
332	select VIDEOMODE_HELPERS
333	help
334	  Say Y here if you want to enable support for the Seiko
335	  43WVF1G controller for 800x480 LCD panels
336
337config DRM_PANEL_SHARP_LQ101R1SX01
338	tristate "Sharp LQ101R1SX01 panel"
339	depends on OF
340	depends on DRM_MIPI_DSI
341	depends on BACKLIGHT_CLASS_DEVICE
342	help
343	  Say Y here if you want to enable support for Sharp LQ101R1SX01
344	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
345	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
346	  the host and has a built-in LED backlight.
347
348	  To compile this driver as a module, choose M here: the module
349	  will be called panel-sharp-lq101r1sx01.
350
351config DRM_PANEL_SHARP_LS037V7DW01
352	tristate "Sharp LS037V7DW01 VGA LCD panel"
353	depends on GPIOLIB && OF && REGULATOR
354	help
355	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
356	  (480x640) LCD panel (found on the TI SDP3430 board).
357
358config DRM_PANEL_SHARP_LS043T1LE01
359	tristate "Sharp LS043T1LE01 qHD video mode panel"
360	depends on OF
361	depends on DRM_MIPI_DSI
362	depends on BACKLIGHT_CLASS_DEVICE
363	help
364	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
365	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
366
367config DRM_PANEL_SITRONIX_ST7701
368	tristate "Sitronix ST7701 panel driver"
369	depends on OF
370	depends on DRM_MIPI_DSI
371	depends on BACKLIGHT_CLASS_DEVICE
372	help
373	  Say Y here if you want to enable support for the Sitronix
374	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
375	  system interfaces.
376
377config DRM_PANEL_SITRONIX_ST7789V
378	tristate "Sitronix ST7789V panel"
379	depends on OF && SPI
380	depends on BACKLIGHT_CLASS_DEVICE
381	help
382	  Say Y here if you want to enable support for the Sitronix
383	  ST7789V controller for 240x320 LCD panels
384
385config DRM_PANEL_SONY_ACX424AKP
386	tristate "Sony ACX424AKP DSI command mode panel"
387	depends on OF
388	depends on DRM_MIPI_DSI
389	depends on BACKLIGHT_CLASS_DEVICE
390	select VIDEOMODE_HELPERS
391	help
392	  Say Y here if you want to enable the Sony ACX424 display
393	  panel. This panel supports DSI in both command and video
394	  mode.
395
396config DRM_PANEL_SONY_ACX565AKM
397	tristate "Sony ACX565AKM panel"
398	depends on GPIOLIB && OF && SPI
399	depends on BACKLIGHT_CLASS_DEVICE
400	help
401	  Say Y here if you want to enable support for the Sony ACX565AKM
402	  800x600 3.5" panel (found on the Nokia N900).
403
404config DRM_PANEL_TPO_TD028TTEC1
405	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
406	depends on OF && SPI
407	depends on BACKLIGHT_CLASS_DEVICE
408	help
409	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
410	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
411
412config DRM_PANEL_TPO_TD043MTEA1
413	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
414	depends on GPIOLIB && OF && REGULATOR && SPI
415	help
416	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
417	  4.3" panel (found on the OMAP3 Pandora board).
418
419config DRM_PANEL_TPO_TPG110
420	tristate "TPO TPG 800x400 panel"
421	depends on OF && SPI && GPIOLIB
422	depends on BACKLIGHT_CLASS_DEVICE
423	help
424	  Say Y here if you want to enable support for TPO TPG110
425	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
426	  800x400 LCD panels.
427
428config DRM_PANEL_TRULY_NT35597_WQXGA
429	tristate "Truly WQXGA"
430	depends on OF
431	depends on DRM_MIPI_DSI
432	help
433	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
434	  Video Mode panel
435
436config DRM_PANEL_XINPENG_XPP055C272
437	tristate "Xinpeng XPP055C272 panel driver"
438	depends on OF
439	depends on DRM_MIPI_DSI
440	depends on BACKLIGHT_CLASS_DEVICE
441	help
442	  Say Y here if you want to enable support for the Xinpeng
443	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
444	  system interfaces.
445endmenu
446