xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision 137bfbd0) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_LVDS
22	tristate "Generic LVDS panel driver"
23	depends on OF
24	depends on BACKLIGHT_CLASS_DEVICE
25	select VIDEOMODE_HELPERS
26	help
27	  This driver supports LVDS panels that don't require device-specific
28	  handling of power supplies or control signals. It implements automatic
29	  backlight handling if the panel is attached to a backlight controller.
30
31config DRM_PANEL_SIMPLE
32	tristate "support for simple panels"
33	depends on OF
34	depends on BACKLIGHT_CLASS_DEVICE
35	select VIDEOMODE_HELPERS
36	help
37	  DRM panel driver for dumb panels that need at most a regulator and
38	  a GPIO to be powered up. Optionally a backlight can be attached so
39	  that it can be automatically turned off when the panel goes into a
40	  low power state.
41
42config DRM_PANEL_FEIYANG_FY07024DI26A30D
43	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
44	depends on OF
45	depends on DRM_MIPI_DSI
46	depends on BACKLIGHT_CLASS_DEVICE
47	help
48	  Say Y if you want to enable support for panels based on the
49	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
50
51config DRM_PANEL_ILITEK_IL9322
52	tristate "Ilitek ILI9322 320x240 QVGA panels"
53	depends on OF && SPI
54	select REGMAP
55	help
56	  Say Y here if you want to enable support for Ilitek IL9322
57	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
58
59config DRM_PANEL_ILITEK_ILI9881C
60	tristate "Ilitek ILI9881C-based panels"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y if you want to enable support for panels based on the
66	  Ilitek ILI9881c controller.
67
68config DRM_PANEL_INNOLUX_P079ZCA
69	tristate "Innolux P079ZCA panel"
70	depends on OF
71	depends on DRM_MIPI_DSI
72	depends on BACKLIGHT_CLASS_DEVICE
73	help
74	  Say Y here if you want to enable support for Innolux P079ZCA
75	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
76	  24 bit RGB per pixel. It provides a MIPI DSI interface to
77	  the host and has a built-in LED backlight.
78
79config DRM_PANEL_JDI_LT070ME05000
80	tristate "JDI LT070ME05000 WUXGA DSI panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for JDI DSI video mode
86	  panel as found in Google Nexus 7 (2013) devices.
87	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
88	  24 bit per pixel.
89
90config DRM_PANEL_KINGDISPLAY_KD097D04
91	tristate "Kingdisplay kd097d04 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to enable support for Kingdisplay kd097d04
97	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
98	  24 bit RGB per pixel. It provides a MIPI DSI interface to
99	  the host and has a built-in LED backlight.
100
101config DRM_PANEL_SAMSUNG_LD9040
102	tristate "Samsung LD9040 RGB/SPI panel"
103	depends on OF && SPI
104	select VIDEOMODE_HELPERS
105
106config DRM_PANEL_LG_LG4573
107	tristate "LG4573 RGB/SPI panel"
108	depends on OF && SPI
109	select VIDEOMODE_HELPERS
110	help
111	  Say Y here if you want to enable support for LG4573 RGB panel.
112	  To compile this driver as a module, choose M here.
113
114config DRM_PANEL_OLIMEX_LCD_OLINUXINO
115	tristate "Olimex LCD-OLinuXino panel"
116	depends on OF
117	depends on I2C
118	depends on BACKLIGHT_CLASS_DEVICE
119	help
120	  The panel is used with different sizes LCDs, from 480x272 to
121	  1280x800, and 24 bit per pixel.
122
123	  Say Y here if you want to enable support for Olimex Ltd.
124	  LCD-OLinuXino panel.
125
126config DRM_PANEL_ORISETECH_OTM8009A
127	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
128	depends on OF
129	depends on DRM_MIPI_DSI
130	depends on BACKLIGHT_CLASS_DEVICE
131	help
132	  Say Y here if you want to enable support for Orise Technology
133	  otm8009a 480x800 dsi 2dl panel.
134
135config DRM_PANEL_OSD_OSD101T2587_53TS
136	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
137	depends on OF
138	depends on DRM_MIPI_DSI
139	depends on BACKLIGHT_CLASS_DEVICE
140	help
141	  Say Y here if you want to enable support for One Stop Displays
142	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
143
144config DRM_PANEL_PANASONIC_VVX10F034N00
145	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
146	depends on OF
147	depends on DRM_MIPI_DSI
148	depends on BACKLIGHT_CLASS_DEVICE
149	help
150	  Say Y here if you want to enable support for Panasonic VVX10F034N00
151	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
152	  Xperia Z2 tablets
153
154config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
155	tristate "Raspberry Pi 7-inch touchscreen panel"
156	depends on DRM_MIPI_DSI
157	help
158	  Say Y here if you want to enable support for the Raspberry
159	  Pi 7" Touchscreen.  To compile this driver as a module,
160	  choose M here.
161
162config DRM_PANEL_RAYDIUM_RM68200
163	tristate "Raydium RM68200 720x1280 DSI video mode panel"
164	depends on OF
165	depends on DRM_MIPI_DSI
166	depends on BACKLIGHT_CLASS_DEVICE
167	help
168	  Say Y here if you want to enable support for Raydium RM68200
169	  720x1280 DSI video mode panel.
170
171config DRM_PANEL_ROCKTECH_JH057N00900
172	tristate "Rocktech JH057N00900 MIPI touchscreen panel"
173	depends on OF
174	depends on DRM_MIPI_DSI
175	depends on BACKLIGHT_CLASS_DEVICE
176	help
177	  Say Y here if you want to enable support for Rocktech JH057N00900
178	  MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
179	  resolution of 720x1440 pixels, a built in backlight and touch
180	  controller.
181	  Touch input support is provided by the goodix driver and needs to be
182	  selected separately.
183
184config DRM_PANEL_RONBO_RB070D30
185	tristate "Ronbo Electronics RB070D30 panel"
186	depends on OF
187	depends on DRM_MIPI_DSI
188	depends on BACKLIGHT_CLASS_DEVICE
189	help
190	  Say Y here if you want to enable support for Ronbo Electronics
191	  RB070D30 1024x600 DSI panel.
192
193config DRM_PANEL_SAMSUNG_S6D16D0
194	tristate "Samsung S6D16D0 DSI video mode panel"
195	depends on OF
196	depends on DRM_MIPI_DSI
197	select VIDEOMODE_HELPERS
198
199config DRM_PANEL_SAMSUNG_S6E3HA2
200	tristate "Samsung S6E3HA2 DSI video mode panel"
201	depends on OF
202	depends on DRM_MIPI_DSI
203	depends on BACKLIGHT_CLASS_DEVICE
204	select VIDEOMODE_HELPERS
205
206config DRM_PANEL_SAMSUNG_S6E63J0X03
207	tristate "Samsung S6E63J0X03 DSI command mode panel"
208	depends on OF
209	depends on DRM_MIPI_DSI
210	depends on BACKLIGHT_CLASS_DEVICE
211	select VIDEOMODE_HELPERS
212
213config DRM_PANEL_SAMSUNG_S6E63M0
214	tristate "Samsung S6E63M0 RGB/SPI panel"
215	depends on OF
216	depends on SPI
217	depends on BACKLIGHT_CLASS_DEVICE
218	help
219	  Say Y here if you want to enable support for Samsung S6E63M0
220	  AMOLED LCD panel.
221
222config DRM_PANEL_SAMSUNG_S6E8AA0
223	tristate "Samsung S6E8AA0 DSI video mode panel"
224	depends on OF
225	select DRM_MIPI_DSI
226	select VIDEOMODE_HELPERS
227
228config DRM_PANEL_SEIKO_43WVF1G
229	tristate "Seiko 43WVF1G panel"
230	depends on OF
231	depends on BACKLIGHT_CLASS_DEVICE
232	select VIDEOMODE_HELPERS
233	help
234	  Say Y here if you want to enable support for the Seiko
235	  43WVF1G controller for 800x480 LCD panels
236
237config DRM_PANEL_SHARP_LQ101R1SX01
238	tristate "Sharp LQ101R1SX01 panel"
239	depends on OF
240	depends on DRM_MIPI_DSI
241	depends on BACKLIGHT_CLASS_DEVICE
242	help
243	  Say Y here if you want to enable support for Sharp LQ101R1SX01
244	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
245	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
246	  the host and has a built-in LED backlight.
247
248	  To compile this driver as a module, choose M here: the module
249	  will be called panel-sharp-lq101r1sx01.
250
251config DRM_PANEL_SHARP_LS043T1LE01
252	tristate "Sharp LS043T1LE01 qHD video mode panel"
253	depends on OF
254	depends on DRM_MIPI_DSI
255	depends on BACKLIGHT_CLASS_DEVICE
256	help
257	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
258	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
259
260config DRM_PANEL_SITRONIX_ST7701
261	tristate "Sitronix ST7701 panel driver"
262	depends on OF
263	depends on DRM_MIPI_DSI
264	depends on BACKLIGHT_CLASS_DEVICE
265	help
266	  Say Y here if you want to enable support for the Sitronix
267	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
268	  system interfaces.
269
270config DRM_PANEL_SITRONIX_ST7789V
271	tristate "Sitronix ST7789V panel"
272	depends on OF && SPI
273	depends on BACKLIGHT_CLASS_DEVICE
274	help
275	  Say Y here if you want to enable support for the Sitronix
276	  ST7789V controller for 240x320 LCD panels
277
278config DRM_PANEL_TPO_TPG110
279	tristate "TPO TPG 800x400 panel"
280	depends on OF && SPI && GPIOLIB
281	depends on BACKLIGHT_CLASS_DEVICE
282	help
283	  Say Y here if you want to enable support for TPO TPG110
284	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
285	  800x400 LCD panels.
286
287config DRM_PANEL_TRULY_NT35597_WQXGA
288	tristate "Truly WQXGA"
289	depends on OF
290	depends on DRM_MIPI_DSI
291	help
292	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
293	  Video Mode panel
294endmenu
295