1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ARM_VERSATILE 12 tristate "ARM Versatile panel driver" 13 depends on OF 14 depends on MFD_SYSCON 15 select VIDEOMODE_HELPERS 16 help 17 This driver supports the ARM Versatile panels connected to ARM 18 reference designs. The panel is detected using special registers 19 in the Versatile family syscon registers. 20 21config DRM_PANEL_LVDS 22 tristate "Generic LVDS panel driver" 23 depends on OF 24 depends on BACKLIGHT_CLASS_DEVICE 25 select VIDEOMODE_HELPERS 26 help 27 This driver supports LVDS panels that don't require device-specific 28 handling of power supplies or control signals. It implements automatic 29 backlight handling if the panel is attached to a backlight controller. 30 31config DRM_PANEL_SIMPLE 32 tristate "support for simple panels" 33 depends on OF 34 depends on BACKLIGHT_CLASS_DEVICE 35 select VIDEOMODE_HELPERS 36 help 37 DRM panel driver for dumb panels that need at most a regulator and 38 a GPIO to be powered up. Optionally a backlight can be attached so 39 that it can be automatically turned off when the panel goes into a 40 low power state. 41 42config DRM_PANEL_FEIYANG_FY07024DI26A30D 43 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 44 depends on OF 45 depends on DRM_MIPI_DSI 46 depends on BACKLIGHT_CLASS_DEVICE 47 help 48 Say Y if you want to enable support for panels based on the 49 Feiyang FY07024DI26A30-D MIPI-DSI interface. 50 51config DRM_PANEL_ILITEK_IL9322 52 tristate "Ilitek ILI9322 320x240 QVGA panels" 53 depends on OF && SPI 54 select REGMAP 55 help 56 Say Y here if you want to enable support for Ilitek IL9322 57 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 58 59config DRM_PANEL_ILITEK_ILI9881C 60 tristate "Ilitek ILI9881C-based panels" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y if you want to enable support for panels based on the 66 Ilitek ILI9881c controller. 67 68config DRM_PANEL_INNOLUX_P079ZCA 69 tristate "Innolux P079ZCA panel" 70 depends on OF 71 depends on DRM_MIPI_DSI 72 depends on BACKLIGHT_CLASS_DEVICE 73 help 74 Say Y here if you want to enable support for Innolux P079ZCA 75 TFT-LCD modules. The panel has a 1024x768 resolution and uses 76 24 bit RGB per pixel. It provides a MIPI DSI interface to 77 the host and has a built-in LED backlight. 78 79config DRM_PANEL_JDI_LT070ME05000 80 tristate "JDI LT070ME05000 WUXGA DSI panel" 81 depends on OF 82 depends on DRM_MIPI_DSI 83 depends on BACKLIGHT_CLASS_DEVICE 84 help 85 Say Y here if you want to enable support for JDI DSI video mode 86 panel as found in Google Nexus 7 (2013) devices. 87 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 88 24 bit per pixel. 89 90config DRM_PANEL_KINGDISPLAY_KD097D04 91 tristate "Kingdisplay kd097d04 panel" 92 depends on OF 93 depends on DRM_MIPI_DSI 94 depends on BACKLIGHT_CLASS_DEVICE 95 help 96 Say Y here if you want to enable support for Kingdisplay kd097d04 97 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 98 24 bit RGB per pixel. It provides a MIPI DSI interface to 99 the host and has a built-in LED backlight. 100 101config DRM_PANEL_SAMSUNG_LD9040 102 tristate "Samsung LD9040 RGB/SPI panel" 103 depends on OF && SPI 104 select VIDEOMODE_HELPERS 105 106config DRM_PANEL_LG_LG4573 107 tristate "LG4573 RGB/SPI panel" 108 depends on OF && SPI 109 select VIDEOMODE_HELPERS 110 help 111 Say Y here if you want to enable support for LG4573 RGB panel. 112 To compile this driver as a module, choose M here. 113 114config DRM_PANEL_OLIMEX_LCD_OLINUXINO 115 tristate "Olimex LCD-OLinuXino panel" 116 depends on OF 117 depends on I2C 118 depends on BACKLIGHT_CLASS_DEVICE 119 help 120 The panel is used with different sizes LCDs, from 480x272 to 121 1280x800, and 24 bit per pixel. 122 123 Say Y here if you want to enable support for Olimex Ltd. 124 LCD-OLinuXino panel. 125 126config DRM_PANEL_ORISETECH_OTM8009A 127 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 128 depends on OF 129 depends on DRM_MIPI_DSI 130 depends on BACKLIGHT_CLASS_DEVICE 131 help 132 Say Y here if you want to enable support for Orise Technology 133 otm8009a 480x800 dsi 2dl panel. 134 135config DRM_PANEL_PANASONIC_VVX10F034N00 136 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 137 depends on OF 138 depends on DRM_MIPI_DSI 139 depends on BACKLIGHT_CLASS_DEVICE 140 help 141 Say Y here if you want to enable support for Panasonic VVX10F034N00 142 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 143 Xperia Z2 tablets 144 145config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 146 tristate "Raspberry Pi 7-inch touchscreen panel" 147 depends on DRM_MIPI_DSI 148 help 149 Say Y here if you want to enable support for the Raspberry 150 Pi 7" Touchscreen. To compile this driver as a module, 151 choose M here. 152 153config DRM_PANEL_RAYDIUM_RM68200 154 tristate "Raydium RM68200 720x1280 DSI video mode panel" 155 depends on OF 156 depends on DRM_MIPI_DSI 157 depends on BACKLIGHT_CLASS_DEVICE 158 help 159 Say Y here if you want to enable support for Raydium RM68200 160 720x1280 DSI video mode panel. 161 162config DRM_PANEL_ROCKTECH_JH057N00900 163 tristate "Rocktech JH057N00900 MIPI touchscreen panel" 164 depends on OF 165 depends on DRM_MIPI_DSI 166 depends on BACKLIGHT_CLASS_DEVICE 167 help 168 Say Y here if you want to enable support for Rocktech JH057N00900 169 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a 170 resolution of 720x1440 pixels, a built in backlight and touch 171 controller. 172 Touch input support is provided by the goodix driver and needs to be 173 selected separately. 174 175config DRM_PANEL_RONBO_RB070D30 176 tristate "Ronbo Electronics RB070D30 panel" 177 depends on OF 178 depends on DRM_MIPI_DSI 179 depends on BACKLIGHT_CLASS_DEVICE 180 help 181 Say Y here if you want to enable support for Ronbo Electronics 182 RB070D30 1024x600 DSI panel. 183 184config DRM_PANEL_SAMSUNG_S6D16D0 185 tristate "Samsung S6D16D0 DSI video mode panel" 186 depends on OF 187 depends on DRM_MIPI_DSI 188 select VIDEOMODE_HELPERS 189 190config DRM_PANEL_SAMSUNG_S6E3HA2 191 tristate "Samsung S6E3HA2 DSI video mode panel" 192 depends on OF 193 depends on DRM_MIPI_DSI 194 depends on BACKLIGHT_CLASS_DEVICE 195 select VIDEOMODE_HELPERS 196 197config DRM_PANEL_SAMSUNG_S6E63J0X03 198 tristate "Samsung S6E63J0X03 DSI command mode panel" 199 depends on OF 200 depends on DRM_MIPI_DSI 201 depends on BACKLIGHT_CLASS_DEVICE 202 select VIDEOMODE_HELPERS 203 204config DRM_PANEL_SAMSUNG_S6E8AA0 205 tristate "Samsung S6E8AA0 DSI video mode panel" 206 depends on OF 207 select DRM_MIPI_DSI 208 select VIDEOMODE_HELPERS 209 210config DRM_PANEL_SEIKO_43WVF1G 211 tristate "Seiko 43WVF1G panel" 212 depends on OF 213 depends on BACKLIGHT_CLASS_DEVICE 214 select VIDEOMODE_HELPERS 215 help 216 Say Y here if you want to enable support for the Seiko 217 43WVF1G controller for 800x480 LCD panels 218 219config DRM_PANEL_SHARP_LQ101R1SX01 220 tristate "Sharp LQ101R1SX01 panel" 221 depends on OF 222 depends on DRM_MIPI_DSI 223 depends on BACKLIGHT_CLASS_DEVICE 224 help 225 Say Y here if you want to enable support for Sharp LQ101R1SX01 226 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 227 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 228 the host and has a built-in LED backlight. 229 230 To compile this driver as a module, choose M here: the module 231 will be called panel-sharp-lq101r1sx01. 232 233config DRM_PANEL_SHARP_LS043T1LE01 234 tristate "Sharp LS043T1LE01 qHD video mode panel" 235 depends on OF 236 depends on DRM_MIPI_DSI 237 depends on BACKLIGHT_CLASS_DEVICE 238 help 239 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 240 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 241 242config DRM_PANEL_SITRONIX_ST7701 243 tristate "Sitronix ST7701 panel driver" 244 depends on OF 245 depends on DRM_MIPI_DSI 246 depends on BACKLIGHT_CLASS_DEVICE 247 help 248 Say Y here if you want to enable support for the Sitronix 249 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 250 system interfaces. 251 252config DRM_PANEL_SITRONIX_ST7789V 253 tristate "Sitronix ST7789V panel" 254 depends on OF && SPI 255 depends on BACKLIGHT_CLASS_DEVICE 256 help 257 Say Y here if you want to enable support for the Sitronix 258 ST7789V controller for 240x320 LCD panels 259 260config DRM_PANEL_TPO_TPG110 261 tristate "TPO TPG 800x400 panel" 262 depends on OF && SPI && GPIOLIB 263 depends on BACKLIGHT_CLASS_DEVICE 264 help 265 Say Y here if you want to enable support for TPO TPG110 266 400CH LTPS TFT LCD Single Chip Digital Driver for up to 267 800x400 LCD panels. 268 269config DRM_PANEL_TRULY_NT35597_WQXGA 270 tristate "Truly WQXGA" 271 depends on OF 272 depends on DRM_MIPI_DSI 273 help 274 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 275 Video Mode panel 276endmenu 277