1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2015, The Linux Foundation. All rights reserved. 4 */ 5 6 #include <linux/clk-provider.h> 7 #include <linux/platform_device.h> 8 #include <dt-bindings/phy/phy.h> 9 10 #include "dsi_phy.h" 11 12 #define S_DIV_ROUND_UP(n, d) \ 13 (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d))) 14 15 static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent, 16 s32 min_result, bool even) 17 { 18 s32 v; 19 20 v = (tmax - tmin) * percent; 21 v = S_DIV_ROUND_UP(v, 100) + tmin; 22 if (even && (v & 0x1)) 23 return max_t(s32, min_result, v - 1); 24 else 25 return max_t(s32, min_result, v); 26 } 27 28 static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing, 29 s32 ui, s32 coeff, s32 pcnt) 30 { 31 s32 tmax, tmin, clk_z; 32 s32 temp; 33 34 /* reset */ 35 temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui; 36 tmin = S_DIV_ROUND_UP(temp, ui) - 2; 37 if (tmin > 255) { 38 tmax = 511; 39 clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true); 40 } else { 41 tmax = 255; 42 clk_z = linear_inter(tmax, tmin, pcnt, 0, true); 43 } 44 45 /* adjust */ 46 temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7; 47 timing->clk_zero = clk_z + 8 - temp; 48 } 49 50 int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing, 51 struct msm_dsi_phy_clk_request *clk_req) 52 { 53 const unsigned long bit_rate = clk_req->bitclk_rate; 54 const unsigned long esc_rate = clk_req->escclk_rate; 55 s32 ui, lpx; 56 s32 tmax, tmin; 57 s32 pcnt0 = 10; 58 s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10; 59 s32 pcnt2 = 10; 60 s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40; 61 s32 coeff = 1000; /* Precision, should avoid overflow */ 62 s32 temp; 63 64 if (!bit_rate || !esc_rate) 65 return -EINVAL; 66 67 ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); 68 lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000); 69 70 tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2; 71 tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2; 72 timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true); 73 74 temp = lpx / ui; 75 if (temp & 0x1) 76 timing->hs_rqst = temp; 77 else 78 timing->hs_rqst = max_t(s32, 0, temp - 2); 79 80 /* Calculate clk_zero after clk_prepare and hs_rqst */ 81 dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2); 82 83 temp = 105 * coeff + 12 * ui - 20 * coeff; 84 tmax = S_DIV_ROUND_UP(temp, ui) - 2; 85 tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2; 86 timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true); 87 88 temp = 85 * coeff + 6 * ui; 89 tmax = S_DIV_ROUND_UP(temp, ui) - 2; 90 temp = 40 * coeff + 4 * ui; 91 tmin = S_DIV_ROUND_UP(temp, ui) - 2; 92 timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true); 93 94 tmax = 255; 95 temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui; 96 temp = 145 * coeff + 10 * ui - temp; 97 tmin = S_DIV_ROUND_UP(temp, ui) - 2; 98 timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true); 99 100 temp = 105 * coeff + 12 * ui - 20 * coeff; 101 tmax = S_DIV_ROUND_UP(temp, ui) - 2; 102 temp = 60 * coeff + 4 * ui; 103 tmin = DIV_ROUND_UP(temp, ui) - 2; 104 timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true); 105 106 tmax = 255; 107 tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2; 108 timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true); 109 110 tmax = 63; 111 temp = ((timing->hs_exit >> 1) + 1) * 2 * ui; 112 temp = 60 * coeff + 52 * ui - 24 * ui - temp; 113 tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; 114 timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0, 115 false); 116 tmax = 63; 117 temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui; 118 temp += ((timing->clk_zero >> 1) + 1) * 2 * ui; 119 temp += 8 * ui + lpx; 120 tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; 121 if (tmin > tmax) { 122 temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false); 123 timing->shared_timings.clk_pre = temp >> 1; 124 timing->shared_timings.clk_pre_inc_by_2 = true; 125 } else { 126 timing->shared_timings.clk_pre = 127 linear_inter(tmax, tmin, pcnt2, 0, false); 128 timing->shared_timings.clk_pre_inc_by_2 = false; 129 } 130 131 timing->ta_go = 3; 132 timing->ta_sure = 0; 133 timing->ta_get = 4; 134 135 DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", 136 timing->shared_timings.clk_pre, timing->shared_timings.clk_post, 137 timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, 138 timing->clk_trail, timing->clk_prepare, timing->hs_exit, 139 timing->hs_zero, timing->hs_prepare, timing->hs_trail, 140 timing->hs_rqst); 141 142 return 0; 143 } 144 145 int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, 146 struct msm_dsi_phy_clk_request *clk_req) 147 { 148 const unsigned long bit_rate = clk_req->bitclk_rate; 149 const unsigned long esc_rate = clk_req->escclk_rate; 150 s32 ui, ui_x8; 151 s32 tmax, tmin; 152 s32 pcnt0 = 50; 153 s32 pcnt1 = 50; 154 s32 pcnt2 = 10; 155 s32 pcnt3 = 30; 156 s32 pcnt4 = 10; 157 s32 pcnt5 = 2; 158 s32 coeff = 1000; /* Precision, should avoid overflow */ 159 s32 hb_en, hb_en_ckln, pd_ckln, pd; 160 s32 val, val_ckln; 161 s32 temp; 162 163 if (!bit_rate || !esc_rate) 164 return -EINVAL; 165 166 timing->hs_halfbyte_en = 0; 167 hb_en = 0; 168 timing->hs_halfbyte_en_ckln = 0; 169 hb_en_ckln = 0; 170 timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3; 171 pd_ckln = timing->hs_prep_dly_ckln; 172 timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1; 173 pd = timing->hs_prep_dly; 174 175 val = (hb_en << 2) + (pd << 1); 176 val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1); 177 178 ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); 179 ui_x8 = ui << 3; 180 181 temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8); 182 tmin = max_t(s32, temp, 0); 183 temp = (95 * coeff - val_ckln * ui) / ui_x8; 184 tmax = max_t(s32, temp, 0); 185 timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); 186 187 temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui; 188 tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; 189 tmax = (tmin > 255) ? 511 : 255; 190 timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); 191 192 tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); 193 temp = 105 * coeff + 12 * ui - 20 * coeff; 194 tmax = (temp + 3 * ui) / ui_x8; 195 timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); 196 197 temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8); 198 tmin = max_t(s32, temp, 0); 199 temp = (85 * coeff + 6 * ui - val * ui) / ui_x8; 200 tmax = max_t(s32, temp, 0); 201 timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); 202 203 temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui; 204 tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; 205 tmax = 255; 206 timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); 207 208 tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8); 209 temp = 105 * coeff + 12 * ui - 20 * coeff; 210 tmax = (temp + 3 * ui) / ui_x8; 211 timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); 212 213 temp = 50 * coeff + ((hb_en << 2) - 8) * ui; 214 timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); 215 216 tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; 217 tmax = 255; 218 timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); 219 220 temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; 221 timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); 222 223 temp = 60 * coeff + 52 * ui - 43 * ui; 224 tmin = DIV_ROUND_UP(temp, ui_x8) - 1; 225 tmax = 63; 226 timing->shared_timings.clk_post = 227 linear_inter(tmax, tmin, pcnt2, 0, false); 228 229 temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui; 230 temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui; 231 temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : 232 (((timing->hs_rqst_ckln << 3) + 8) * ui); 233 tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; 234 tmax = 63; 235 if (tmin > tmax) { 236 temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); 237 timing->shared_timings.clk_pre = temp >> 1; 238 timing->shared_timings.clk_pre_inc_by_2 = 1; 239 } else { 240 timing->shared_timings.clk_pre = 241 linear_inter(tmax, tmin, pcnt2, 0, false); 242 timing->shared_timings.clk_pre_inc_by_2 = 0; 243 } 244 245 timing->ta_go = 3; 246 timing->ta_sure = 0; 247 timing->ta_get = 4; 248 249 DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", 250 timing->shared_timings.clk_pre, timing->shared_timings.clk_post, 251 timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, 252 timing->clk_trail, timing->clk_prepare, timing->hs_exit, 253 timing->hs_zero, timing->hs_prepare, timing->hs_trail, 254 timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, 255 timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, 256 timing->hs_prep_dly_ckln); 257 258 return 0; 259 } 260 261 int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing, 262 struct msm_dsi_phy_clk_request *clk_req) 263 { 264 const unsigned long bit_rate = clk_req->bitclk_rate; 265 const unsigned long esc_rate = clk_req->escclk_rate; 266 s32 ui, ui_x8; 267 s32 tmax, tmin; 268 s32 pcnt0 = 50; 269 s32 pcnt1 = 50; 270 s32 pcnt2 = 10; 271 s32 pcnt3 = 30; 272 s32 pcnt4 = 10; 273 s32 pcnt5 = 2; 274 s32 coeff = 1000; /* Precision, should avoid overflow */ 275 s32 hb_en, hb_en_ckln; 276 s32 temp; 277 278 if (!bit_rate || !esc_rate) 279 return -EINVAL; 280 281 timing->hs_halfbyte_en = 0; 282 hb_en = 0; 283 timing->hs_halfbyte_en_ckln = 0; 284 hb_en_ckln = 0; 285 286 ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); 287 ui_x8 = ui << 3; 288 289 temp = S_DIV_ROUND_UP(38 * coeff, ui_x8); 290 tmin = max_t(s32, temp, 0); 291 temp = (95 * coeff) / ui_x8; 292 tmax = max_t(s32, temp, 0); 293 timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); 294 295 temp = 300 * coeff - (timing->clk_prepare << 3) * ui; 296 tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; 297 tmax = (tmin > 255) ? 511 : 255; 298 timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); 299 300 tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); 301 temp = 105 * coeff + 12 * ui - 20 * coeff; 302 tmax = (temp + 3 * ui) / ui_x8; 303 timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); 304 305 temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8); 306 tmin = max_t(s32, temp, 0); 307 temp = (85 * coeff + 6 * ui) / ui_x8; 308 tmax = max_t(s32, temp, 0); 309 timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); 310 311 temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui; 312 tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; 313 tmax = 255; 314 timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); 315 316 tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1; 317 temp = 105 * coeff + 12 * ui - 20 * coeff; 318 tmax = (temp / ui_x8) - 1; 319 timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); 320 321 temp = 50 * coeff + ((hb_en << 2) - 8) * ui; 322 timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); 323 324 tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; 325 tmax = 255; 326 timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); 327 328 temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; 329 timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); 330 331 temp = 60 * coeff + 52 * ui - 43 * ui; 332 tmin = DIV_ROUND_UP(temp, ui_x8) - 1; 333 tmax = 63; 334 timing->shared_timings.clk_post = 335 linear_inter(tmax, tmin, pcnt2, 0, false); 336 337 temp = 8 * ui + (timing->clk_prepare << 3) * ui; 338 temp += (((timing->clk_zero + 3) << 3) + 11) * ui; 339 temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : 340 (((timing->hs_rqst_ckln << 3) + 8) * ui); 341 tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; 342 tmax = 63; 343 if (tmin > tmax) { 344 temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); 345 timing->shared_timings.clk_pre = temp >> 1; 346 timing->shared_timings.clk_pre_inc_by_2 = 1; 347 } else { 348 timing->shared_timings.clk_pre = 349 linear_inter(tmax, tmin, pcnt2, 0, false); 350 timing->shared_timings.clk_pre_inc_by_2 = 0; 351 } 352 353 timing->ta_go = 3; 354 timing->ta_sure = 0; 355 timing->ta_get = 4; 356 357 DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", 358 timing->shared_timings.clk_pre, timing->shared_timings.clk_post, 359 timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, 360 timing->clk_trail, timing->clk_prepare, timing->hs_exit, 361 timing->hs_zero, timing->hs_prepare, timing->hs_trail, 362 timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, 363 timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, 364 timing->hs_prep_dly_ckln); 365 366 return 0; 367 } 368 369 int msm_dsi_dphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing, 370 struct msm_dsi_phy_clk_request *clk_req) 371 { 372 const unsigned long bit_rate = clk_req->bitclk_rate; 373 const unsigned long esc_rate = clk_req->escclk_rate; 374 s32 ui, ui_x8; 375 s32 tmax, tmin; 376 s32 pcnt_clk_prep = 50; 377 s32 pcnt_clk_zero = 2; 378 s32 pcnt_clk_trail = 30; 379 s32 pcnt_hs_prep = 50; 380 s32 pcnt_hs_zero = 10; 381 s32 pcnt_hs_trail = 30; 382 s32 pcnt_hs_exit = 10; 383 s32 coeff = 1000; /* Precision, should avoid overflow */ 384 s32 hb_en; 385 s32 temp; 386 387 if (!bit_rate || !esc_rate) 388 return -EINVAL; 389 390 hb_en = 0; 391 392 ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); 393 ui_x8 = ui << 3; 394 395 /* TODO: verify these calculations against latest downstream driver 396 * everything except clk_post/clk_pre uses calculations from v3 based 397 * on the downstream driver having the same calculations for v3 and v4 398 */ 399 400 temp = S_DIV_ROUND_UP(38 * coeff, ui_x8); 401 tmin = max_t(s32, temp, 0); 402 temp = (95 * coeff) / ui_x8; 403 tmax = max_t(s32, temp, 0); 404 timing->clk_prepare = linear_inter(tmax, tmin, pcnt_clk_prep, 0, false); 405 406 temp = 300 * coeff - (timing->clk_prepare << 3) * ui; 407 tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; 408 tmax = (tmin > 255) ? 511 : 255; 409 timing->clk_zero = linear_inter(tmax, tmin, pcnt_clk_zero, 0, false); 410 411 tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); 412 temp = 105 * coeff + 12 * ui - 20 * coeff; 413 tmax = (temp + 3 * ui) / ui_x8; 414 timing->clk_trail = linear_inter(tmax, tmin, pcnt_clk_trail, 0, false); 415 416 temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8); 417 tmin = max_t(s32, temp, 0); 418 temp = (85 * coeff + 6 * ui) / ui_x8; 419 tmax = max_t(s32, temp, 0); 420 timing->hs_prepare = linear_inter(tmax, tmin, pcnt_hs_prep, 0, false); 421 422 temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui; 423 tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; 424 tmax = 255; 425 timing->hs_zero = linear_inter(tmax, tmin, pcnt_hs_zero, 0, false); 426 427 tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1; 428 temp = 105 * coeff + 12 * ui - 20 * coeff; 429 tmax = (temp / ui_x8) - 1; 430 timing->hs_trail = linear_inter(tmax, tmin, pcnt_hs_trail, 0, false); 431 432 temp = 50 * coeff + ((hb_en << 2) - 8) * ui; 433 timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); 434 435 tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; 436 tmax = 255; 437 timing->hs_exit = linear_inter(tmax, tmin, pcnt_hs_exit, 0, false); 438 439 /* recommended min 440 * = roundup((mipi_min_ns + t_hs_trail_ns)/(16*bit_clk_ns), 0) - 1 441 */ 442 temp = 60 * coeff + 52 * ui + + (timing->hs_trail + 1) * ui_x8; 443 tmin = DIV_ROUND_UP(temp, 16 * ui) - 1; 444 tmax = 255; 445 timing->shared_timings.clk_post = linear_inter(tmax, tmin, 5, 0, false); 446 447 /* recommended min 448 * val1 = (tlpx_ns + clk_prepare_ns + clk_zero_ns + hs_rqst_ns) 449 * val2 = (16 * bit_clk_ns) 450 * final = roundup(val1/val2, 0) - 1 451 */ 452 temp = 52 * coeff + (timing->clk_prepare + timing->clk_zero + 1) * ui_x8 + 54 * coeff; 453 tmin = DIV_ROUND_UP(temp, 16 * ui) - 1; 454 tmax = 255; 455 timing->shared_timings.clk_pre = DIV_ROUND_UP((tmax - tmin) * 125, 10000) + tmin; 456 457 DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d", 458 timing->shared_timings.clk_pre, timing->shared_timings.clk_post, 459 timing->clk_zero, timing->clk_trail, timing->clk_prepare, timing->hs_exit, 460 timing->hs_zero, timing->hs_prepare, timing->hs_trail, timing->hs_rqst); 461 462 return 0; 463 } 464 465 int msm_dsi_cphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing, 466 struct msm_dsi_phy_clk_request *clk_req) 467 { 468 const unsigned long bit_rate = clk_req->bitclk_rate; 469 const unsigned long esc_rate = clk_req->escclk_rate; 470 s32 ui, ui_x7; 471 s32 tmax, tmin; 472 s32 coeff = 1000; /* Precision, should avoid overflow */ 473 s32 temp; 474 475 if (!bit_rate || !esc_rate) 476 return -EINVAL; 477 478 ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); 479 ui_x7 = ui * 7; 480 481 temp = S_DIV_ROUND_UP(38 * coeff, ui_x7); 482 tmin = max_t(s32, temp, 0); 483 temp = (95 * coeff) / ui_x7; 484 tmax = max_t(s32, temp, 0); 485 timing->clk_prepare = linear_inter(tmax, tmin, 50, 0, false); 486 487 tmin = DIV_ROUND_UP(50 * coeff, ui_x7); 488 tmax = 255; 489 timing->hs_rqst = linear_inter(tmax, tmin, 1, 0, false); 490 491 tmin = DIV_ROUND_UP(100 * coeff, ui_x7) - 1; 492 tmax = 255; 493 timing->hs_exit = linear_inter(tmax, tmin, 10, 0, false); 494 495 tmin = 1; 496 tmax = 32; 497 timing->shared_timings.clk_post = linear_inter(tmax, tmin, 80, 0, false); 498 499 tmin = min_t(s32, 64, S_DIV_ROUND_UP(262 * coeff, ui_x7) - 1); 500 tmax = 64; 501 timing->shared_timings.clk_pre = linear_inter(tmax, tmin, 20, 0, false); 502 503 DBG("%d, %d, %d, %d, %d", 504 timing->shared_timings.clk_pre, timing->shared_timings.clk_post, 505 timing->clk_prepare, timing->hs_exit, timing->hs_rqst); 506 507 return 0; 508 } 509 510 static int dsi_phy_regulator_init(struct msm_dsi_phy *phy) 511 { 512 struct regulator_bulk_data *s = phy->supplies; 513 const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; 514 struct device *dev = &phy->pdev->dev; 515 int num = phy->cfg->reg_cfg.num; 516 int i, ret; 517 518 for (i = 0; i < num; i++) 519 s[i].supply = regs[i].name; 520 521 ret = devm_regulator_bulk_get(dev, num, s); 522 if (ret < 0) { 523 if (ret != -EPROBE_DEFER) { 524 DRM_DEV_ERROR(dev, 525 "%s: failed to init regulator, ret=%d\n", 526 __func__, ret); 527 } 528 529 return ret; 530 } 531 532 return 0; 533 } 534 535 static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy) 536 { 537 struct regulator_bulk_data *s = phy->supplies; 538 const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; 539 int num = phy->cfg->reg_cfg.num; 540 int i; 541 542 DBG(""); 543 for (i = num - 1; i >= 0; i--) 544 if (regs[i].disable_load >= 0) 545 regulator_set_load(s[i].consumer, regs[i].disable_load); 546 547 regulator_bulk_disable(num, s); 548 } 549 550 static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy) 551 { 552 struct regulator_bulk_data *s = phy->supplies; 553 const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; 554 struct device *dev = &phy->pdev->dev; 555 int num = phy->cfg->reg_cfg.num; 556 int ret, i; 557 558 DBG(""); 559 for (i = 0; i < num; i++) { 560 if (regs[i].enable_load >= 0) { 561 ret = regulator_set_load(s[i].consumer, 562 regs[i].enable_load); 563 if (ret < 0) { 564 DRM_DEV_ERROR(dev, 565 "regulator %d set op mode failed, %d\n", 566 i, ret); 567 goto fail; 568 } 569 } 570 } 571 572 ret = regulator_bulk_enable(num, s); 573 if (ret < 0) { 574 DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret); 575 goto fail; 576 } 577 578 return 0; 579 580 fail: 581 for (i--; i >= 0; i--) 582 regulator_set_load(s[i].consumer, regs[i].disable_load); 583 return ret; 584 } 585 586 static int dsi_phy_enable_resource(struct msm_dsi_phy *phy) 587 { 588 struct device *dev = &phy->pdev->dev; 589 int ret; 590 591 pm_runtime_get_sync(dev); 592 593 ret = clk_prepare_enable(phy->ahb_clk); 594 if (ret) { 595 DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret); 596 pm_runtime_put_sync(dev); 597 } 598 599 return ret; 600 } 601 602 static void dsi_phy_disable_resource(struct msm_dsi_phy *phy) 603 { 604 clk_disable_unprepare(phy->ahb_clk); 605 pm_runtime_put(&phy->pdev->dev); 606 } 607 608 static const struct of_device_id dsi_phy_dt_match[] = { 609 #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY 610 { .compatible = "qcom,dsi-phy-28nm-hpm", 611 .data = &dsi_phy_28nm_hpm_cfgs }, 612 { .compatible = "qcom,dsi-phy-28nm-hpm-fam-b", 613 .data = &dsi_phy_28nm_hpm_famb_cfgs }, 614 { .compatible = "qcom,dsi-phy-28nm-lp", 615 .data = &dsi_phy_28nm_lp_cfgs }, 616 #endif 617 #ifdef CONFIG_DRM_MSM_DSI_20NM_PHY 618 { .compatible = "qcom,dsi-phy-20nm", 619 .data = &dsi_phy_20nm_cfgs }, 620 #endif 621 #ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY 622 { .compatible = "qcom,dsi-phy-28nm-8960", 623 .data = &dsi_phy_28nm_8960_cfgs }, 624 #endif 625 #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY 626 { .compatible = "qcom,dsi-phy-14nm", 627 .data = &dsi_phy_14nm_cfgs }, 628 { .compatible = "qcom,dsi-phy-14nm-660", 629 .data = &dsi_phy_14nm_660_cfgs }, 630 { .compatible = "qcom,dsi-phy-14nm-8953", 631 .data = &dsi_phy_14nm_8953_cfgs }, 632 #endif 633 #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY 634 { .compatible = "qcom,dsi-phy-10nm", 635 .data = &dsi_phy_10nm_cfgs }, 636 { .compatible = "qcom,dsi-phy-10nm-8998", 637 .data = &dsi_phy_10nm_8998_cfgs }, 638 #endif 639 #ifdef CONFIG_DRM_MSM_DSI_7NM_PHY 640 { .compatible = "qcom,dsi-phy-7nm", 641 .data = &dsi_phy_7nm_cfgs }, 642 { .compatible = "qcom,dsi-phy-7nm-8150", 643 .data = &dsi_phy_7nm_8150_cfgs }, 644 { .compatible = "qcom,sc7280-dsi-phy-7nm", 645 .data = &dsi_phy_7nm_7280_cfgs }, 646 #endif 647 {} 648 }; 649 650 /* 651 * Currently, we only support one SoC for each PHY type. When we have multiple 652 * SoCs for the same PHY, we can try to make the index searching a bit more 653 * clever. 654 */ 655 static int dsi_phy_get_id(struct msm_dsi_phy *phy) 656 { 657 struct platform_device *pdev = phy->pdev; 658 const struct msm_dsi_phy_cfg *cfg = phy->cfg; 659 struct resource *res; 660 int i; 661 662 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy"); 663 if (!res) 664 return -EINVAL; 665 666 for (i = 0; i < cfg->num_dsi_phy; i++) { 667 if (cfg->io_start[i] == res->start) 668 return i; 669 } 670 671 return -EINVAL; 672 } 673 674 static int dsi_phy_driver_probe(struct platform_device *pdev) 675 { 676 struct msm_dsi_phy *phy; 677 struct device *dev = &pdev->dev; 678 u32 phy_type; 679 int ret; 680 681 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); 682 if (!phy) 683 return -ENOMEM; 684 685 phy->provided_clocks = devm_kzalloc(dev, 686 struct_size(phy->provided_clocks, hws, NUM_PROVIDED_CLKS), 687 GFP_KERNEL); 688 if (!phy->provided_clocks) 689 return -ENOMEM; 690 691 phy->provided_clocks->num = NUM_PROVIDED_CLKS; 692 693 phy->cfg = of_device_get_match_data(&pdev->dev); 694 if (!phy->cfg) 695 return -ENODEV; 696 697 phy->pdev = pdev; 698 699 phy->id = dsi_phy_get_id(phy); 700 if (phy->id < 0) { 701 ret = phy->id; 702 DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n", 703 __func__, ret); 704 goto fail; 705 } 706 707 phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, 708 "qcom,dsi-phy-regulator-ldo-mode"); 709 if (!of_property_read_u32(dev->of_node, "phy-type", &phy_type)) 710 phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); 711 712 phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size); 713 if (IS_ERR(phy->base)) { 714 DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__); 715 ret = -ENOMEM; 716 goto fail; 717 } 718 719 phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size); 720 if (IS_ERR(phy->pll_base)) { 721 DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); 722 ret = -ENOMEM; 723 goto fail; 724 } 725 726 if (phy->cfg->has_phy_lane) { 727 phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size); 728 if (IS_ERR(phy->lane_base)) { 729 DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n", __func__); 730 ret = -ENOMEM; 731 goto fail; 732 } 733 } 734 735 if (phy->cfg->has_phy_regulator) { 736 phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size); 737 if (IS_ERR(phy->reg_base)) { 738 DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n", __func__); 739 ret = -ENOMEM; 740 goto fail; 741 } 742 } 743 744 if (phy->cfg->ops.parse_dt_properties) { 745 ret = phy->cfg->ops.parse_dt_properties(phy); 746 if (ret) 747 goto fail; 748 } 749 750 ret = dsi_phy_regulator_init(phy); 751 if (ret) 752 goto fail; 753 754 phy->ahb_clk = msm_clk_get(pdev, "iface"); 755 if (IS_ERR(phy->ahb_clk)) { 756 DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__); 757 ret = PTR_ERR(phy->ahb_clk); 758 goto fail; 759 } 760 761 /* PLL init will call into clk_register which requires 762 * register access, so we need to enable power and ahb clock. 763 */ 764 ret = dsi_phy_enable_resource(phy); 765 if (ret) 766 goto fail; 767 768 if (phy->cfg->ops.pll_init) { 769 ret = phy->cfg->ops.pll_init(phy); 770 if (ret) { 771 DRM_DEV_INFO(dev, 772 "%s: pll init failed: %d, need separate pll clk driver\n", 773 __func__, ret); 774 goto fail; 775 } 776 } 777 778 ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, 779 phy->provided_clocks); 780 if (ret) { 781 DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret); 782 goto fail; 783 } 784 785 dsi_phy_disable_resource(phy); 786 787 platform_set_drvdata(pdev, phy); 788 789 return 0; 790 791 fail: 792 return ret; 793 } 794 795 static struct platform_driver dsi_phy_platform_driver = { 796 .probe = dsi_phy_driver_probe, 797 .driver = { 798 .name = "msm_dsi_phy", 799 .of_match_table = dsi_phy_dt_match, 800 }, 801 }; 802 803 void __init msm_dsi_phy_driver_register(void) 804 { 805 platform_driver_register(&dsi_phy_platform_driver); 806 } 807 808 void __exit msm_dsi_phy_driver_unregister(void) 809 { 810 platform_driver_unregister(&dsi_phy_platform_driver); 811 } 812 813 int msm_dsi_phy_enable(struct msm_dsi_phy *phy, 814 struct msm_dsi_phy_clk_request *clk_req, 815 struct msm_dsi_phy_shared_timings *shared_timings) 816 { 817 struct device *dev; 818 int ret; 819 820 if (!phy || !phy->cfg->ops.enable) 821 return -EINVAL; 822 823 dev = &phy->pdev->dev; 824 825 ret = dsi_phy_enable_resource(phy); 826 if (ret) { 827 DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n", 828 __func__, ret); 829 goto res_en_fail; 830 } 831 832 ret = dsi_phy_regulator_enable(phy); 833 if (ret) { 834 DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n", 835 __func__, ret); 836 goto reg_en_fail; 837 } 838 839 ret = phy->cfg->ops.enable(phy, clk_req); 840 if (ret) { 841 DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret); 842 goto phy_en_fail; 843 } 844 845 memcpy(shared_timings, &phy->timing.shared_timings, 846 sizeof(*shared_timings)); 847 848 /* 849 * Resetting DSI PHY silently changes its PLL registers to reset status, 850 * which will confuse clock driver and result in wrong output rate of 851 * link clocks. Restore PLL status if its PLL is being used as clock 852 * source. 853 */ 854 if (phy->usecase != MSM_DSI_PHY_SLAVE) { 855 ret = msm_dsi_phy_pll_restore_state(phy); 856 if (ret) { 857 DRM_DEV_ERROR(dev, "%s: failed to restore phy state, %d\n", 858 __func__, ret); 859 goto pll_restor_fail; 860 } 861 } 862 863 return 0; 864 865 pll_restor_fail: 866 if (phy->cfg->ops.disable) 867 phy->cfg->ops.disable(phy); 868 phy_en_fail: 869 dsi_phy_regulator_disable(phy); 870 reg_en_fail: 871 dsi_phy_disable_resource(phy); 872 res_en_fail: 873 return ret; 874 } 875 876 void msm_dsi_phy_disable(struct msm_dsi_phy *phy) 877 { 878 if (!phy || !phy->cfg->ops.disable) 879 return; 880 881 phy->cfg->ops.disable(phy); 882 883 dsi_phy_regulator_disable(phy); 884 dsi_phy_disable_resource(phy); 885 } 886 887 void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy, 888 enum msm_dsi_phy_usecase uc) 889 { 890 if (phy) 891 phy->usecase = uc; 892 } 893 894 /* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */ 895 bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable) 896 { 897 if (!phy || !phy->cfg->ops.set_continuous_clock) 898 return false; 899 900 return phy->cfg->ops.set_continuous_clock(phy, enable); 901 } 902 903 void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy) 904 { 905 if (phy->cfg->ops.save_pll_state) { 906 phy->cfg->ops.save_pll_state(phy); 907 phy->state_saved = true; 908 } 909 } 910 911 int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy) 912 { 913 int ret; 914 915 if (phy->cfg->ops.restore_pll_state && phy->state_saved) { 916 ret = phy->cfg->ops.restore_pll_state(phy); 917 if (ret) 918 return ret; 919 920 phy->state_saved = false; 921 } 922 923 return 0; 924 } 925 926 void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy) 927 { 928 msm_disp_snapshot_add_block(disp_state, 929 phy->base_size, phy->base, 930 "dsi%d_phy", phy->id); 931 932 /* Do not try accessing PLL registers if it is switched off */ 933 if (phy->pll_on) 934 msm_disp_snapshot_add_block(disp_state, 935 phy->pll_size, phy->pll_base, 936 "dsi%d_pll", phy->id); 937 938 if (phy->lane_base) 939 msm_disp_snapshot_add_block(disp_state, 940 phy->lane_size, phy->lane_base, 941 "dsi%d_lane", phy->id); 942 943 if (phy->reg_base) 944 msm_disp_snapshot_add_block(disp_state, 945 phy->reg_size, phy->reg_base, 946 "dsi%d_reg", phy->id); 947 } 948