1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2014-2018 The Linux Foundation. All rights reserved.
4  * Copyright (C) 2013 Red Hat
5  * Author: Rob Clark <robdclark@gmail.com>
6  */
7 
8 #define pr_fmt(fmt)	"[drm:%s:%d] " fmt, __func__, __LINE__
9 
10 #include <linux/debugfs.h>
11 #include <linux/dma-buf.h>
12 
13 #include <drm/drm_atomic.h>
14 #include <drm/drm_atomic_uapi.h>
15 #include <drm/drm_damage_helper.h>
16 #include <drm/drm_file.h>
17 #include <drm/drm_gem_atomic_helper.h>
18 
19 #include "msm_drv.h"
20 #include "dpu_kms.h"
21 #include "dpu_formats.h"
22 #include "dpu_hw_sspp.h"
23 #include "dpu_trace.h"
24 #include "dpu_crtc.h"
25 #include "dpu_vbif.h"
26 #include "dpu_plane.h"
27 
28 #define DPU_DEBUG_PLANE(pl, fmt, ...) DRM_DEBUG_ATOMIC("plane%d " fmt,\
29 		(pl) ? (pl)->base.base.id : -1, ##__VA_ARGS__)
30 
31 #define DPU_ERROR_PLANE(pl, fmt, ...) DPU_ERROR("plane%d " fmt,\
32 		(pl) ? (pl)->base.base.id : -1, ##__VA_ARGS__)
33 
34 #define DECIMATED_DIMENSION(dim, deci) (((dim) + ((1 << (deci)) - 1)) >> (deci))
35 #define PHASE_STEP_SHIFT	21
36 #define PHASE_STEP_UNIT_SCALE   ((int) (1 << PHASE_STEP_SHIFT))
37 #define PHASE_RESIDUAL		15
38 
39 #define SHARP_STRENGTH_DEFAULT	32
40 #define SHARP_EDGE_THR_DEFAULT	112
41 #define SHARP_SMOOTH_THR_DEFAULT	8
42 #define SHARP_NOISE_THR_DEFAULT	2
43 
44 #define DPU_NAME_SIZE  12
45 
46 #define DPU_PLANE_COLOR_FILL_FLAG	BIT(31)
47 #define DPU_ZPOS_MAX 255
48 
49 /* multirect rect index */
50 enum {
51 	R0,
52 	R1,
53 	R_MAX
54 };
55 
56 /*
57  * Default Preload Values
58  */
59 #define DPU_QSEED3_DEFAULT_PRELOAD_H 0x4
60 #define DPU_QSEED3_DEFAULT_PRELOAD_V 0x3
61 #define DPU_QSEED4_DEFAULT_PRELOAD_V 0x2
62 #define DPU_QSEED4_DEFAULT_PRELOAD_H 0x4
63 
64 #define DEFAULT_REFRESH_RATE	60
65 
66 static const uint32_t qcom_compressed_supported_formats[] = {
67 	DRM_FORMAT_ABGR8888,
68 	DRM_FORMAT_ARGB8888,
69 	DRM_FORMAT_XBGR8888,
70 	DRM_FORMAT_XRGB8888,
71 	DRM_FORMAT_BGR565,
72 
73 	DRM_FORMAT_NV12,
74 };
75 
76 /**
77  * enum dpu_plane_qos - Different qos configurations for each pipe
78  *
79  * @DPU_PLANE_QOS_VBLANK_CTRL: Setup VBLANK qos for the pipe.
80  * @DPU_PLANE_QOS_VBLANK_AMORTIZE: Enables Amortization within pipe.
81  *	this configuration is mutually exclusive from VBLANK_CTRL.
82  * @DPU_PLANE_QOS_PANIC_CTRL: Setup panic for the pipe.
83  */
84 enum dpu_plane_qos {
85 	DPU_PLANE_QOS_VBLANK_CTRL = BIT(0),
86 	DPU_PLANE_QOS_VBLANK_AMORTIZE = BIT(1),
87 	DPU_PLANE_QOS_PANIC_CTRL = BIT(2),
88 };
89 
90 /*
91  * struct dpu_plane - local dpu plane structure
92  * @aspace: address space pointer
93  * @csc_ptr: Points to dpu_csc_cfg structure to use for current
94  * @mplane_list: List of multirect planes of the same pipe
95  * @catalog: Points to dpu catalog structure
96  * @revalidate: force revalidation of all the plane properties
97  */
98 struct dpu_plane {
99 	struct drm_plane base;
100 
101 	struct mutex lock;
102 
103 	enum dpu_sspp pipe;
104 	uint32_t features;      /* capabilities from catalog */
105 
106 	struct dpu_hw_pipe *pipe_hw;
107 	struct dpu_hw_pipe_cfg pipe_cfg;
108 	struct dpu_hw_pipe_qos_cfg pipe_qos_cfg;
109 	uint32_t color_fill;
110 	bool is_error;
111 	bool is_rt_pipe;
112 	bool is_virtual;
113 	struct list_head mplane_list;
114 	struct dpu_mdss_cfg *catalog;
115 
116 	struct dpu_csc_cfg *csc_ptr;
117 
118 	const struct dpu_sspp_sub_blks *pipe_sblk;
119 	char pipe_name[DPU_NAME_SIZE];
120 
121 	/* debugfs related stuff */
122 	struct dentry *debugfs_root;
123 	struct dpu_debugfs_regset32 debugfs_src;
124 	struct dpu_debugfs_regset32 debugfs_scaler;
125 	struct dpu_debugfs_regset32 debugfs_csc;
126 	bool debugfs_default_scale;
127 };
128 
129 static const uint64_t supported_format_modifiers[] = {
130 	DRM_FORMAT_MOD_QCOM_COMPRESSED,
131 	DRM_FORMAT_MOD_LINEAR,
132 	DRM_FORMAT_MOD_INVALID
133 };
134 
135 #define to_dpu_plane(x) container_of(x, struct dpu_plane, base)
136 
137 static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane)
138 {
139 	struct msm_drm_private *priv = plane->dev->dev_private;
140 
141 	return to_dpu_kms(priv->kms);
142 }
143 
144 /**
145  * _dpu_plane_calc_bw - calculate bandwidth required for a plane
146  * @plane: Pointer to drm plane.
147  * @fb:   Pointer to framebuffer associated with the given plane
148  * Result: Updates calculated bandwidth in the plane state.
149  * BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
150  * Prefill BW Equation: line src bytes * line_time
151  */
152 static void _dpu_plane_calc_bw(struct drm_plane *plane,
153 	struct drm_framebuffer *fb)
154 {
155 	struct dpu_plane *pdpu = to_dpu_plane(plane);
156 	struct dpu_plane_state *pstate;
157 	struct drm_display_mode *mode;
158 	const struct dpu_format *fmt = NULL;
159 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
160 	int src_width, src_height, dst_height, fps;
161 	u64 plane_prefill_bw;
162 	u64 plane_bw;
163 	u32 hw_latency_lines;
164 	u64 scale_factor;
165 	int vbp, vpw, vfp;
166 
167 	pstate = to_dpu_plane_state(plane->state);
168 	mode = &plane->state->crtc->mode;
169 
170 	fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier);
171 
172 	src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);
173 	src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
174 	dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
175 	fps = drm_mode_vrefresh(mode);
176 	vbp = mode->vtotal - mode->vsync_end;
177 	vpw = mode->vsync_end - mode->vsync_start;
178 	vfp = mode->vsync_start - mode->vdisplay;
179 	hw_latency_lines =  dpu_kms->catalog->perf.min_prefill_lines;
180 	scale_factor = src_height > dst_height ?
181 		mult_frac(src_height, 1, dst_height) : 1;
182 
183 	plane_bw =
184 		src_width * mode->vtotal * fps * fmt->bpp *
185 		scale_factor;
186 
187 	plane_prefill_bw =
188 		src_width * hw_latency_lines * fps * fmt->bpp *
189 		scale_factor * mode->vtotal;
190 
191 	if ((vbp+vpw) > hw_latency_lines)
192 		do_div(plane_prefill_bw, (vbp+vpw));
193 	else if ((vbp+vpw+vfp) < hw_latency_lines)
194 		do_div(plane_prefill_bw, (vbp+vpw+vfp));
195 	else
196 		do_div(plane_prefill_bw, hw_latency_lines);
197 
198 
199 	pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);
200 }
201 
202 /**
203  * _dpu_plane_calc_clk - calculate clock required for a plane
204  * @plane: Pointer to drm plane.
205  * Result: Updates calculated clock in the plane state.
206  * Clock equation: dst_w * v_total * fps * (src_h / dst_h)
207  */
208 static void _dpu_plane_calc_clk(struct drm_plane *plane)
209 {
210 	struct dpu_plane *pdpu = to_dpu_plane(plane);
211 	struct dpu_plane_state *pstate;
212 	struct drm_display_mode *mode;
213 	int dst_width, src_height, dst_height, fps;
214 
215 	pstate = to_dpu_plane_state(plane->state);
216 	mode = &plane->state->crtc->mode;
217 
218 	src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
219 	dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);
220 	dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
221 	fps = drm_mode_vrefresh(mode);
222 
223 	pstate->plane_clk =
224 		dst_width * mode->vtotal * fps;
225 
226 	if (src_height > dst_height) {
227 		pstate->plane_clk *= src_height;
228 		do_div(pstate->plane_clk, dst_height);
229 	}
230 }
231 
232 /**
233  * _dpu_plane_calc_fill_level - calculate fill level of the given source format
234  * @plane:		Pointer to drm plane
235  * @fmt:		Pointer to source buffer format
236  * @src_width:		width of source buffer
237  * Return: fill level corresponding to the source buffer/format or 0 if error
238  */
239 static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
240 		const struct dpu_format *fmt, u32 src_width)
241 {
242 	struct dpu_plane *pdpu, *tmp;
243 	struct dpu_plane_state *pstate;
244 	u32 fixed_buff_size;
245 	u32 total_fl;
246 
247 	if (!fmt || !plane->state || !src_width || !fmt->bpp) {
248 		DPU_ERROR("invalid arguments\n");
249 		return 0;
250 	}
251 
252 	pdpu = to_dpu_plane(plane);
253 	pstate = to_dpu_plane_state(plane->state);
254 	fixed_buff_size = pdpu->catalog->caps->pixel_ram_size;
255 
256 	list_for_each_entry(tmp, &pdpu->mplane_list, mplane_list) {
257 		if (!tmp->base.state->visible)
258 			continue;
259 		DPU_DEBUG("plane%d/%d src_width:%d/%d\n",
260 				pdpu->base.base.id, tmp->base.base.id,
261 				src_width,
262 				drm_rect_width(&tmp->pipe_cfg.src_rect));
263 		src_width = max_t(u32, src_width,
264 				  drm_rect_width(&tmp->pipe_cfg.src_rect));
265 	}
266 
267 	if (fmt->fetch_planes == DPU_PLANE_PSEUDO_PLANAR) {
268 		if (fmt->chroma_sample == DPU_CHROMA_420) {
269 			/* NV12 */
270 			total_fl = (fixed_buff_size / 2) /
271 				((src_width + 32) * fmt->bpp);
272 		} else {
273 			/* non NV12 */
274 			total_fl = (fixed_buff_size / 2) * 2 /
275 				((src_width + 32) * fmt->bpp);
276 		}
277 	} else {
278 		if (pstate->multirect_mode == DPU_SSPP_MULTIRECT_PARALLEL) {
279 			total_fl = (fixed_buff_size / 2) * 2 /
280 				((src_width + 32) * fmt->bpp);
281 		} else {
282 			total_fl = (fixed_buff_size) * 2 /
283 				((src_width + 32) * fmt->bpp);
284 		}
285 	}
286 
287 	DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s w:%u fl:%u\n",
288 			pdpu->pipe - SSPP_VIG0,
289 			(char *)&fmt->base.pixel_format,
290 			src_width, total_fl);
291 
292 	return total_fl;
293 }
294 
295 /**
296  * _dpu_plane_get_qos_lut - get LUT mapping based on fill level
297  * @tbl:		Pointer to LUT table
298  * @total_fl:		fill level
299  * Return: LUT setting corresponding to the fill level
300  */
301 static u64 _dpu_plane_get_qos_lut(const struct dpu_qos_lut_tbl *tbl,
302 		u32 total_fl)
303 {
304 	int i;
305 
306 	if (!tbl || !tbl->nentry || !tbl->entries)
307 		return 0;
308 
309 	for (i = 0; i < tbl->nentry; i++)
310 		if (total_fl <= tbl->entries[i].fl)
311 			return tbl->entries[i].lut;
312 
313 	/* if last fl is zero, use as default */
314 	if (!tbl->entries[i-1].fl)
315 		return tbl->entries[i-1].lut;
316 
317 	return 0;
318 }
319 
320 /**
321  * _dpu_plane_set_qos_lut - set QoS LUT of the given plane
322  * @plane:		Pointer to drm plane
323  * @fb:			Pointer to framebuffer associated with the given plane
324  */
325 static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
326 		struct drm_framebuffer *fb)
327 {
328 	struct dpu_plane *pdpu = to_dpu_plane(plane);
329 	const struct dpu_format *fmt = NULL;
330 	u64 qos_lut;
331 	u32 total_fl = 0, lut_usage;
332 
333 	if (!pdpu->is_rt_pipe) {
334 		lut_usage = DPU_QOS_LUT_USAGE_NRT;
335 	} else {
336 		fmt = dpu_get_dpu_format_ext(
337 				fb->format->format,
338 				fb->modifier);
339 		total_fl = _dpu_plane_calc_fill_level(plane, fmt,
340 				drm_rect_width(&pdpu->pipe_cfg.src_rect));
341 
342 		if (fmt && DPU_FORMAT_IS_LINEAR(fmt))
343 			lut_usage = DPU_QOS_LUT_USAGE_LINEAR;
344 		else
345 			lut_usage = DPU_QOS_LUT_USAGE_MACROTILE;
346 	}
347 
348 	qos_lut = _dpu_plane_get_qos_lut(
349 			&pdpu->catalog->perf.qos_lut_tbl[lut_usage], total_fl);
350 
351 	pdpu->pipe_qos_cfg.creq_lut = qos_lut;
352 
353 	trace_dpu_perf_set_qos_luts(pdpu->pipe - SSPP_VIG0,
354 			(fmt) ? fmt->base.pixel_format : 0,
355 			pdpu->is_rt_pipe, total_fl, qos_lut, lut_usage);
356 
357 	DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s rt:%d fl:%u lut:0x%llx\n",
358 			pdpu->pipe - SSPP_VIG0,
359 			fmt ? (char *)&fmt->base.pixel_format : NULL,
360 			pdpu->is_rt_pipe, total_fl, qos_lut);
361 
362 	pdpu->pipe_hw->ops.setup_creq_lut(pdpu->pipe_hw, &pdpu->pipe_qos_cfg);
363 }
364 
365 /**
366  * _dpu_plane_set_danger_lut - set danger/safe LUT of the given plane
367  * @plane:		Pointer to drm plane
368  * @fb:			Pointer to framebuffer associated with the given plane
369  */
370 static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
371 		struct drm_framebuffer *fb)
372 {
373 	struct dpu_plane *pdpu = to_dpu_plane(plane);
374 	const struct dpu_format *fmt = NULL;
375 	u32 danger_lut, safe_lut;
376 
377 	if (!pdpu->is_rt_pipe) {
378 		danger_lut = pdpu->catalog->perf.danger_lut_tbl
379 				[DPU_QOS_LUT_USAGE_NRT];
380 		safe_lut = pdpu->catalog->perf.safe_lut_tbl
381 				[DPU_QOS_LUT_USAGE_NRT];
382 	} else {
383 		fmt = dpu_get_dpu_format_ext(
384 				fb->format->format,
385 				fb->modifier);
386 
387 		if (fmt && DPU_FORMAT_IS_LINEAR(fmt)) {
388 			danger_lut = pdpu->catalog->perf.danger_lut_tbl
389 					[DPU_QOS_LUT_USAGE_LINEAR];
390 			safe_lut = pdpu->catalog->perf.safe_lut_tbl
391 					[DPU_QOS_LUT_USAGE_LINEAR];
392 		} else {
393 			danger_lut = pdpu->catalog->perf.danger_lut_tbl
394 					[DPU_QOS_LUT_USAGE_MACROTILE];
395 			safe_lut = pdpu->catalog->perf.safe_lut_tbl
396 					[DPU_QOS_LUT_USAGE_MACROTILE];
397 		}
398 	}
399 
400 	pdpu->pipe_qos_cfg.danger_lut = danger_lut;
401 	pdpu->pipe_qos_cfg.safe_lut = safe_lut;
402 
403 	trace_dpu_perf_set_danger_luts(pdpu->pipe - SSPP_VIG0,
404 			(fmt) ? fmt->base.pixel_format : 0,
405 			(fmt) ? fmt->fetch_mode : 0,
406 			pdpu->pipe_qos_cfg.danger_lut,
407 			pdpu->pipe_qos_cfg.safe_lut);
408 
409 	DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s mode:%d luts[0x%x, 0x%x]\n",
410 		pdpu->pipe - SSPP_VIG0,
411 		fmt ? (char *)&fmt->base.pixel_format : NULL,
412 		fmt ? fmt->fetch_mode : -1,
413 		pdpu->pipe_qos_cfg.danger_lut,
414 		pdpu->pipe_qos_cfg.safe_lut);
415 
416 	pdpu->pipe_hw->ops.setup_danger_safe_lut(pdpu->pipe_hw,
417 			&pdpu->pipe_qos_cfg);
418 }
419 
420 /**
421  * _dpu_plane_set_qos_ctrl - set QoS control of the given plane
422  * @plane:		Pointer to drm plane
423  * @enable:		true to enable QoS control
424  * @flags:		QoS control mode (enum dpu_plane_qos)
425  */
426 static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
427 	bool enable, u32 flags)
428 {
429 	struct dpu_plane *pdpu = to_dpu_plane(plane);
430 
431 	if (flags & DPU_PLANE_QOS_VBLANK_CTRL) {
432 		pdpu->pipe_qos_cfg.creq_vblank = pdpu->pipe_sblk->creq_vblank;
433 		pdpu->pipe_qos_cfg.danger_vblank =
434 				pdpu->pipe_sblk->danger_vblank;
435 		pdpu->pipe_qos_cfg.vblank_en = enable;
436 	}
437 
438 	if (flags & DPU_PLANE_QOS_VBLANK_AMORTIZE) {
439 		/* this feature overrules previous VBLANK_CTRL */
440 		pdpu->pipe_qos_cfg.vblank_en = false;
441 		pdpu->pipe_qos_cfg.creq_vblank = 0; /* clear vblank bits */
442 	}
443 
444 	if (flags & DPU_PLANE_QOS_PANIC_CTRL)
445 		pdpu->pipe_qos_cfg.danger_safe_en = enable;
446 
447 	if (!pdpu->is_rt_pipe) {
448 		pdpu->pipe_qos_cfg.vblank_en = false;
449 		pdpu->pipe_qos_cfg.danger_safe_en = false;
450 	}
451 
452 	DPU_DEBUG_PLANE(pdpu, "pnum:%d ds:%d vb:%d pri[0x%x, 0x%x] is_rt:%d\n",
453 		pdpu->pipe - SSPP_VIG0,
454 		pdpu->pipe_qos_cfg.danger_safe_en,
455 		pdpu->pipe_qos_cfg.vblank_en,
456 		pdpu->pipe_qos_cfg.creq_vblank,
457 		pdpu->pipe_qos_cfg.danger_vblank,
458 		pdpu->is_rt_pipe);
459 
460 	pdpu->pipe_hw->ops.setup_qos_ctrl(pdpu->pipe_hw,
461 			&pdpu->pipe_qos_cfg);
462 }
463 
464 /**
465  * _dpu_plane_set_ot_limit - set OT limit for the given plane
466  * @plane:		Pointer to drm plane
467  * @crtc:		Pointer to drm crtc
468  */
469 static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
470 		struct drm_crtc *crtc)
471 {
472 	struct dpu_plane *pdpu = to_dpu_plane(plane);
473 	struct dpu_vbif_set_ot_params ot_params;
474 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
475 
476 	memset(&ot_params, 0, sizeof(ot_params));
477 	ot_params.xin_id = pdpu->pipe_hw->cap->xin_id;
478 	ot_params.num = pdpu->pipe_hw->idx - SSPP_NONE;
479 	ot_params.width = drm_rect_width(&pdpu->pipe_cfg.src_rect);
480 	ot_params.height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
481 	ot_params.is_wfd = !pdpu->is_rt_pipe;
482 	ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
483 	ot_params.vbif_idx = VBIF_RT;
484 	ot_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl;
485 	ot_params.rd = true;
486 
487 	dpu_vbif_set_ot_limit(dpu_kms, &ot_params);
488 }
489 
490 /**
491  * _dpu_plane_set_qos_remap - set vbif QoS for the given plane
492  * @plane:		Pointer to drm plane
493  */
494 static void _dpu_plane_set_qos_remap(struct drm_plane *plane)
495 {
496 	struct dpu_plane *pdpu = to_dpu_plane(plane);
497 	struct dpu_vbif_set_qos_params qos_params;
498 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
499 
500 	memset(&qos_params, 0, sizeof(qos_params));
501 	qos_params.vbif_idx = VBIF_RT;
502 	qos_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl;
503 	qos_params.xin_id = pdpu->pipe_hw->cap->xin_id;
504 	qos_params.num = pdpu->pipe_hw->idx - SSPP_VIG0;
505 	qos_params.is_rt = pdpu->is_rt_pipe;
506 
507 	DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d, clk_ctrl:%d\n",
508 			qos_params.num,
509 			qos_params.vbif_idx,
510 			qos_params.xin_id, qos_params.is_rt,
511 			qos_params.clk_ctrl);
512 
513 	dpu_vbif_set_qos_remap(dpu_kms, &qos_params);
514 }
515 
516 static void _dpu_plane_set_scanout(struct drm_plane *plane,
517 		struct dpu_plane_state *pstate,
518 		struct dpu_hw_pipe_cfg *pipe_cfg,
519 		struct drm_framebuffer *fb)
520 {
521 	struct dpu_plane *pdpu = to_dpu_plane(plane);
522 	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
523 	struct msm_gem_address_space *aspace = kms->base.aspace;
524 	int ret;
525 
526 	ret = dpu_format_populate_layout(aspace, fb, &pipe_cfg->layout);
527 	if (ret == -EAGAIN)
528 		DPU_DEBUG_PLANE(pdpu, "not updating same src addrs\n");
529 	else if (ret)
530 		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
531 	else if (pdpu->pipe_hw->ops.setup_sourceaddress) {
532 		trace_dpu_plane_set_scanout(pdpu->pipe_hw->idx,
533 					    &pipe_cfg->layout,
534 					    pstate->multirect_index);
535 		pdpu->pipe_hw->ops.setup_sourceaddress(pdpu->pipe_hw, pipe_cfg,
536 						pstate->multirect_index);
537 	}
538 }
539 
540 static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
541 		struct dpu_plane_state *pstate,
542 		uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
543 		struct dpu_hw_scaler3_cfg *scale_cfg,
544 		const struct dpu_format *fmt,
545 		uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v)
546 {
547 	uint32_t i;
548 
549 	memset(scale_cfg, 0, sizeof(*scale_cfg));
550 	memset(&pstate->pixel_ext, 0, sizeof(struct dpu_hw_pixel_ext));
551 
552 	scale_cfg->phase_step_x[DPU_SSPP_COMP_0] =
553 		mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w);
554 	scale_cfg->phase_step_y[DPU_SSPP_COMP_0] =
555 		mult_frac((1 << PHASE_STEP_SHIFT), src_h, dst_h);
556 
557 
558 	scale_cfg->phase_step_y[DPU_SSPP_COMP_1_2] =
559 		scale_cfg->phase_step_y[DPU_SSPP_COMP_0] / chroma_subsmpl_v;
560 	scale_cfg->phase_step_x[DPU_SSPP_COMP_1_2] =
561 		scale_cfg->phase_step_x[DPU_SSPP_COMP_0] / chroma_subsmpl_h;
562 
563 	scale_cfg->phase_step_x[DPU_SSPP_COMP_2] =
564 		scale_cfg->phase_step_x[DPU_SSPP_COMP_1_2];
565 	scale_cfg->phase_step_y[DPU_SSPP_COMP_2] =
566 		scale_cfg->phase_step_y[DPU_SSPP_COMP_1_2];
567 
568 	scale_cfg->phase_step_x[DPU_SSPP_COMP_3] =
569 		scale_cfg->phase_step_x[DPU_SSPP_COMP_0];
570 	scale_cfg->phase_step_y[DPU_SSPP_COMP_3] =
571 		scale_cfg->phase_step_y[DPU_SSPP_COMP_0];
572 
573 	for (i = 0; i < DPU_MAX_PLANES; i++) {
574 		scale_cfg->src_width[i] = src_w;
575 		scale_cfg->src_height[i] = src_h;
576 		if (i == DPU_SSPP_COMP_1_2 || i == DPU_SSPP_COMP_2) {
577 			scale_cfg->src_width[i] /= chroma_subsmpl_h;
578 			scale_cfg->src_height[i] /= chroma_subsmpl_v;
579 		}
580 
581 		if (pdpu->pipe_hw->cap->features &
582 			BIT(DPU_SSPP_SCALER_QSEED4)) {
583 			scale_cfg->preload_x[i] = DPU_QSEED4_DEFAULT_PRELOAD_H;
584 			scale_cfg->preload_y[i] = DPU_QSEED4_DEFAULT_PRELOAD_V;
585 		} else {
586 			scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H;
587 			scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V;
588 		}
589 
590 		pstate->pixel_ext.num_ext_pxls_top[i] =
591 			scale_cfg->src_height[i];
592 		pstate->pixel_ext.num_ext_pxls_left[i] =
593 			scale_cfg->src_width[i];
594 	}
595 	if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h)
596 		&& (src_w == dst_w))
597 		return;
598 
599 	scale_cfg->dst_width = dst_w;
600 	scale_cfg->dst_height = dst_h;
601 	scale_cfg->y_rgb_filter_cfg = DPU_SCALE_BIL;
602 	scale_cfg->uv_filter_cfg = DPU_SCALE_BIL;
603 	scale_cfg->alpha_filter_cfg = DPU_SCALE_ALPHA_BIL;
604 	scale_cfg->lut_flag = 0;
605 	scale_cfg->blend_cfg = 1;
606 	scale_cfg->enable = 1;
607 }
608 
609 static void _dpu_plane_setup_csc(struct dpu_plane *pdpu)
610 {
611 	static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
612 		{
613 			/* S15.16 format */
614 			0x00012A00, 0x00000000, 0x00019880,
615 			0x00012A00, 0xFFFF9B80, 0xFFFF3000,
616 			0x00012A00, 0x00020480, 0x00000000,
617 		},
618 		/* signed bias */
619 		{ 0xfff0, 0xff80, 0xff80,},
620 		{ 0x0, 0x0, 0x0,},
621 		/* unsigned clamp */
622 		{ 0x10, 0xeb, 0x10, 0xf0, 0x10, 0xf0,},
623 		{ 0x00, 0xff, 0x00, 0xff, 0x00, 0xff,},
624 	};
625 	static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
626 		{
627 			/* S15.16 format */
628 			0x00012A00, 0x00000000, 0x00019880,
629 			0x00012A00, 0xFFFF9B80, 0xFFFF3000,
630 			0x00012A00, 0x00020480, 0x00000000,
631 			},
632 		/* signed bias */
633 		{ 0xffc0, 0xfe00, 0xfe00,},
634 		{ 0x0, 0x0, 0x0,},
635 		/* unsigned clamp */
636 		{ 0x40, 0x3ac, 0x40, 0x3c0, 0x40, 0x3c0,},
637 		{ 0x00, 0x3ff, 0x00, 0x3ff, 0x00, 0x3ff,},
638 	};
639 
640 	if (!pdpu) {
641 		DPU_ERROR("invalid plane\n");
642 		return;
643 	}
644 
645 	if (BIT(DPU_SSPP_CSC_10BIT) & pdpu->features)
646 		pdpu->csc_ptr = (struct dpu_csc_cfg *)&dpu_csc10_YUV2RGB_601L;
647 	else
648 		pdpu->csc_ptr = (struct dpu_csc_cfg *)&dpu_csc_YUV2RGB_601L;
649 
650 	DPU_DEBUG_PLANE(pdpu, "using 0x%X 0x%X 0x%X...\n",
651 			pdpu->csc_ptr->csc_mv[0],
652 			pdpu->csc_ptr->csc_mv[1],
653 			pdpu->csc_ptr->csc_mv[2]);
654 }
655 
656 static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
657 		struct dpu_plane_state *pstate,
658 		const struct dpu_format *fmt, bool color_fill)
659 {
660 	const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format);
661 
662 	/* don't chroma subsample if decimating */
663 	/* update scaler. calculate default config for QSEED3 */
664 	_dpu_plane_setup_scaler3(pdpu, pstate,
665 			drm_rect_width(&pdpu->pipe_cfg.src_rect),
666 			drm_rect_height(&pdpu->pipe_cfg.src_rect),
667 			drm_rect_width(&pdpu->pipe_cfg.dst_rect),
668 			drm_rect_height(&pdpu->pipe_cfg.dst_rect),
669 			&pstate->scaler3_cfg, fmt,
670 			info->hsub, info->vsub);
671 }
672 
673 /**
674  * _dpu_plane_color_fill - enables color fill on plane
675  * @pdpu:   Pointer to DPU plane object
676  * @color:  RGB fill color value, [23..16] Blue, [15..8] Green, [7..0] Red
677  * @alpha:  8-bit fill alpha value, 255 selects 100% alpha
678  * Returns: 0 on success
679  */
680 static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
681 		uint32_t color, uint32_t alpha)
682 {
683 	const struct dpu_format *fmt;
684 	const struct drm_plane *plane = &pdpu->base;
685 	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
686 
687 	DPU_DEBUG_PLANE(pdpu, "\n");
688 
689 	/*
690 	 * select fill format to match user property expectation,
691 	 * h/w only supports RGB variants
692 	 */
693 	fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);
694 
695 	/* update sspp */
696 	if (fmt && pdpu->pipe_hw->ops.setup_solidfill) {
697 		pdpu->pipe_hw->ops.setup_solidfill(pdpu->pipe_hw,
698 				(color & 0xFFFFFF) | ((alpha & 0xFF) << 24),
699 				pstate->multirect_index);
700 
701 		/* override scaler/decimation if solid fill */
702 		pdpu->pipe_cfg.src_rect.x1 = 0;
703 		pdpu->pipe_cfg.src_rect.y1 = 0;
704 		pdpu->pipe_cfg.src_rect.x2 =
705 			drm_rect_width(&pdpu->pipe_cfg.dst_rect);
706 		pdpu->pipe_cfg.src_rect.y2 =
707 			drm_rect_height(&pdpu->pipe_cfg.dst_rect);
708 		_dpu_plane_setup_scaler(pdpu, pstate, fmt, true);
709 
710 		if (pdpu->pipe_hw->ops.setup_format)
711 			pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw,
712 					fmt, DPU_SSPP_SOLID_FILL,
713 					pstate->multirect_index);
714 
715 		if (pdpu->pipe_hw->ops.setup_rects)
716 			pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
717 					&pdpu->pipe_cfg,
718 					pstate->multirect_index);
719 
720 		if (pdpu->pipe_hw->ops.setup_pe)
721 			pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
722 					&pstate->pixel_ext);
723 
724 		if (pdpu->pipe_hw->ops.setup_scaler &&
725 				pstate->multirect_index != DPU_SSPP_RECT_1)
726 			pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
727 					&pdpu->pipe_cfg, &pstate->pixel_ext,
728 					&pstate->scaler3_cfg);
729 	}
730 
731 	return 0;
732 }
733 
734 void dpu_plane_clear_multirect(const struct drm_plane_state *drm_state)
735 {
736 	struct dpu_plane_state *pstate = to_dpu_plane_state(drm_state);
737 
738 	pstate->multirect_index = DPU_SSPP_RECT_SOLO;
739 	pstate->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
740 }
741 
742 int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane)
743 {
744 	struct dpu_plane_state *pstate[R_MAX];
745 	const struct drm_plane_state *drm_state[R_MAX];
746 	struct drm_rect src[R_MAX], dst[R_MAX];
747 	struct dpu_plane *dpu_plane[R_MAX];
748 	const struct dpu_format *fmt[R_MAX];
749 	int i, buffer_lines;
750 	unsigned int max_tile_height = 1;
751 	bool parallel_fetch_qualified = true;
752 	bool has_tiled_rect = false;
753 
754 	for (i = 0; i < R_MAX; i++) {
755 		const struct msm_format *msm_fmt;
756 
757 		drm_state[i] = i ? plane->r1 : plane->r0;
758 		msm_fmt = msm_framebuffer_format(drm_state[i]->fb);
759 		fmt[i] = to_dpu_format(msm_fmt);
760 
761 		if (DPU_FORMAT_IS_UBWC(fmt[i])) {
762 			has_tiled_rect = true;
763 			if (fmt[i]->tile_height > max_tile_height)
764 				max_tile_height = fmt[i]->tile_height;
765 		}
766 	}
767 
768 	for (i = 0; i < R_MAX; i++) {
769 		int width_threshold;
770 
771 		pstate[i] = to_dpu_plane_state(drm_state[i]);
772 		dpu_plane[i] = to_dpu_plane(drm_state[i]->plane);
773 
774 		if (pstate[i] == NULL) {
775 			DPU_ERROR("DPU plane state of plane id %d is NULL\n",
776 				drm_state[i]->plane->base.id);
777 			return -EINVAL;
778 		}
779 
780 		src[i].x1 = drm_state[i]->src_x >> 16;
781 		src[i].y1 = drm_state[i]->src_y >> 16;
782 		src[i].x2 = src[i].x1 + (drm_state[i]->src_w >> 16);
783 		src[i].y2 = src[i].y1 + (drm_state[i]->src_h >> 16);
784 
785 		dst[i] = drm_plane_state_dest(drm_state[i]);
786 
787 		if (drm_rect_calc_hscale(&src[i], &dst[i], 1, 1) != 1 ||
788 		    drm_rect_calc_vscale(&src[i], &dst[i], 1, 1) != 1) {
789 			DPU_ERROR_PLANE(dpu_plane[i],
790 				"scaling is not supported in multirect mode\n");
791 			return -EINVAL;
792 		}
793 
794 		if (DPU_FORMAT_IS_YUV(fmt[i])) {
795 			DPU_ERROR_PLANE(dpu_plane[i],
796 				"Unsupported format for multirect mode\n");
797 			return -EINVAL;
798 		}
799 
800 		/**
801 		 * SSPP PD_MEM is split half - one for each RECT.
802 		 * Tiled formats need 5 lines of buffering while fetching
803 		 * whereas linear formats need only 2 lines.
804 		 * So we cannot support more than half of the supported SSPP
805 		 * width for tiled formats.
806 		 */
807 		width_threshold = dpu_plane[i]->catalog->caps->max_linewidth;
808 		if (has_tiled_rect)
809 			width_threshold /= 2;
810 
811 		if (parallel_fetch_qualified &&
812 		    drm_rect_width(&src[i]) > width_threshold)
813 			parallel_fetch_qualified = false;
814 
815 	}
816 
817 	/* Validate RECT's and set the mode */
818 
819 	/* Prefer PARALLEL FETCH Mode over TIME_MX Mode */
820 	if (parallel_fetch_qualified) {
821 		pstate[R0]->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
822 		pstate[R1]->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
823 
824 		goto done;
825 	}
826 
827 	/* TIME_MX Mode */
828 	buffer_lines = 2 * max_tile_height;
829 
830 	if (dst[R1].y1 >= dst[R0].y2 + buffer_lines ||
831 	    dst[R0].y1 >= dst[R1].y2 + buffer_lines) {
832 		pstate[R0]->multirect_mode = DPU_SSPP_MULTIRECT_TIME_MX;
833 		pstate[R1]->multirect_mode = DPU_SSPP_MULTIRECT_TIME_MX;
834 	} else {
835 		DPU_ERROR(
836 			"No multirect mode possible for the planes (%d - %d)\n",
837 			drm_state[R0]->plane->base.id,
838 			drm_state[R1]->plane->base.id);
839 		return -EINVAL;
840 	}
841 
842 done:
843 	if (dpu_plane[R0]->is_virtual) {
844 		pstate[R0]->multirect_index = DPU_SSPP_RECT_1;
845 		pstate[R1]->multirect_index = DPU_SSPP_RECT_0;
846 	} else {
847 		pstate[R0]->multirect_index = DPU_SSPP_RECT_0;
848 		pstate[R1]->multirect_index = DPU_SSPP_RECT_1;
849 	}
850 
851 	DPU_DEBUG_PLANE(dpu_plane[R0], "R0: %d - %d\n",
852 		pstate[R0]->multirect_mode, pstate[R0]->multirect_index);
853 	DPU_DEBUG_PLANE(dpu_plane[R1], "R1: %d - %d\n",
854 		pstate[R1]->multirect_mode, pstate[R1]->multirect_index);
855 	return 0;
856 }
857 
858 /**
859  * dpu_plane_get_ctl_flush - get control flush for the given plane
860  * @plane: Pointer to drm plane structure
861  * @ctl: Pointer to hardware control driver
862  * @flush_sspp: Pointer to sspp flush control word
863  */
864 void dpu_plane_get_ctl_flush(struct drm_plane *plane, struct dpu_hw_ctl *ctl,
865 		u32 *flush_sspp)
866 {
867 	*flush_sspp = ctl->ops.get_bitmask_sspp(ctl, dpu_plane_pipe(plane));
868 }
869 
870 static int dpu_plane_prepare_fb(struct drm_plane *plane,
871 		struct drm_plane_state *new_state)
872 {
873 	struct drm_framebuffer *fb = new_state->fb;
874 	struct dpu_plane *pdpu = to_dpu_plane(plane);
875 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_state);
876 	struct dpu_hw_fmt_layout layout;
877 	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
878 	int ret;
879 
880 	if (!new_state->fb)
881 		return 0;
882 
883 	DPU_DEBUG_PLANE(pdpu, "FB[%u]\n", fb->base.id);
884 
885 	/* cache aspace */
886 	pstate->aspace = kms->base.aspace;
887 
888 	/*
889 	 * TODO: Need to sort out the msm_framebuffer_prepare() call below so
890 	 *       we can use msm_atomic_prepare_fb() instead of doing the
891 	 *       implicit fence and fb prepare by hand here.
892 	 */
893 	drm_gem_plane_helper_prepare_fb(plane, new_state);
894 
895 	if (pstate->aspace) {
896 		ret = msm_framebuffer_prepare(new_state->fb,
897 				pstate->aspace);
898 		if (ret) {
899 			DPU_ERROR("failed to prepare framebuffer\n");
900 			return ret;
901 		}
902 	}
903 
904 	/* validate framebuffer layout before commit */
905 	ret = dpu_format_populate_layout(pstate->aspace,
906 			new_state->fb, &layout);
907 	if (ret) {
908 		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
909 		return ret;
910 	}
911 
912 	return 0;
913 }
914 
915 static void dpu_plane_cleanup_fb(struct drm_plane *plane,
916 		struct drm_plane_state *old_state)
917 {
918 	struct dpu_plane *pdpu = to_dpu_plane(plane);
919 	struct dpu_plane_state *old_pstate;
920 
921 	if (!old_state || !old_state->fb)
922 		return;
923 
924 	old_pstate = to_dpu_plane_state(old_state);
925 
926 	DPU_DEBUG_PLANE(pdpu, "FB[%u]\n", old_state->fb->base.id);
927 
928 	msm_framebuffer_cleanup(old_state->fb, old_pstate->aspace);
929 }
930 
931 static bool dpu_plane_validate_src(struct drm_rect *src,
932 				   struct drm_rect *fb_rect,
933 				   uint32_t min_src_size)
934 {
935 	/* Ensure fb size is supported */
936 	if (drm_rect_width(fb_rect) > MAX_IMG_WIDTH ||
937 	    drm_rect_height(fb_rect) > MAX_IMG_HEIGHT)
938 		return false;
939 
940 	/* Ensure src rect is above the minimum size */
941 	if (drm_rect_width(src) < min_src_size ||
942 	    drm_rect_height(src) < min_src_size)
943 		return false;
944 
945 	/* Ensure src is fully encapsulated in fb */
946 	return drm_rect_intersect(fb_rect, src) &&
947 		drm_rect_equals(fb_rect, src);
948 }
949 
950 static int dpu_plane_atomic_check(struct drm_plane *plane,
951 				  struct drm_atomic_state *state)
952 {
953 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
954 										 plane);
955 	int ret = 0, min_scale;
956 	struct dpu_plane *pdpu = to_dpu_plane(plane);
957 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
958 	const struct drm_crtc_state *crtc_state = NULL;
959 	const struct dpu_format *fmt;
960 	struct drm_rect src, dst, fb_rect = { 0 };
961 	uint32_t min_src_size, max_linewidth;
962 
963 	if (new_plane_state->crtc)
964 		crtc_state = drm_atomic_get_new_crtc_state(state,
965 							   new_plane_state->crtc);
966 
967 	min_scale = FRAC_16_16(1, pdpu->pipe_sblk->maxupscale);
968 	ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
969 						  min_scale,
970 						  pdpu->pipe_sblk->maxdwnscale << 16,
971 						  true, true);
972 	if (ret) {
973 		DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret);
974 		return ret;
975 	}
976 	if (!new_plane_state->visible)
977 		return 0;
978 
979 	src.x1 = new_plane_state->src_x >> 16;
980 	src.y1 = new_plane_state->src_y >> 16;
981 	src.x2 = src.x1 + (new_plane_state->src_w >> 16);
982 	src.y2 = src.y1 + (new_plane_state->src_h >> 16);
983 
984 	dst = drm_plane_state_dest(new_plane_state);
985 
986 	fb_rect.x2 = new_plane_state->fb->width;
987 	fb_rect.y2 = new_plane_state->fb->height;
988 
989 	max_linewidth = pdpu->catalog->caps->max_linewidth;
990 
991 	fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
992 
993 	min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
994 
995 	if (DPU_FORMAT_IS_YUV(fmt) &&
996 		(!(pdpu->features & DPU_SSPP_SCALER) ||
997 		 !(pdpu->features & (BIT(DPU_SSPP_CSC)
998 		 | BIT(DPU_SSPP_CSC_10BIT))))) {
999 		DPU_DEBUG_PLANE(pdpu,
1000 				"plane doesn't have scaler/csc for yuv\n");
1001 		return -EINVAL;
1002 
1003 	/* check src bounds */
1004 	} else if (!dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
1005 		DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
1006 				DRM_RECT_ARG(&src));
1007 		return -E2BIG;
1008 
1009 	/* valid yuv image */
1010 	} else if (DPU_FORMAT_IS_YUV(fmt) &&
1011 		   (src.x1 & 0x1 || src.y1 & 0x1 ||
1012 		    drm_rect_width(&src) & 0x1 ||
1013 		    drm_rect_height(&src) & 0x1)) {
1014 		DPU_DEBUG_PLANE(pdpu, "invalid yuv source " DRM_RECT_FMT "\n",
1015 				DRM_RECT_ARG(&src));
1016 		return -EINVAL;
1017 
1018 	/* min dst support */
1019 	} else if (drm_rect_width(&dst) < 0x1 || drm_rect_height(&dst) < 0x1) {
1020 		DPU_DEBUG_PLANE(pdpu, "invalid dest rect " DRM_RECT_FMT "\n",
1021 				DRM_RECT_ARG(&dst));
1022 		return -EINVAL;
1023 
1024 	/* check decimated source width */
1025 	} else if (drm_rect_width(&src) > max_linewidth) {
1026 		DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
1027 				DRM_RECT_ARG(&src), max_linewidth);
1028 		return -E2BIG;
1029 	}
1030 
1031 	pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
1032 
1033 	return 0;
1034 }
1035 
1036 void dpu_plane_flush(struct drm_plane *plane)
1037 {
1038 	struct dpu_plane *pdpu;
1039 	struct dpu_plane_state *pstate;
1040 
1041 	if (!plane || !plane->state) {
1042 		DPU_ERROR("invalid plane\n");
1043 		return;
1044 	}
1045 
1046 	pdpu = to_dpu_plane(plane);
1047 	pstate = to_dpu_plane_state(plane->state);
1048 
1049 	/*
1050 	 * These updates have to be done immediately before the plane flush
1051 	 * timing, and may not be moved to the atomic_update/mode_set functions.
1052 	 */
1053 	if (pdpu->is_error)
1054 		/* force white frame with 100% alpha pipe output on error */
1055 		_dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF);
1056 	else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
1057 		/* force 100% alpha */
1058 		_dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
1059 	else if (pdpu->pipe_hw && pdpu->csc_ptr && pdpu->pipe_hw->ops.setup_csc)
1060 		pdpu->pipe_hw->ops.setup_csc(pdpu->pipe_hw, pdpu->csc_ptr);
1061 
1062 	/* flag h/w flush complete */
1063 	if (plane->state)
1064 		pstate->pending = false;
1065 }
1066 
1067 /**
1068  * dpu_plane_set_error: enable/disable error condition
1069  * @plane: pointer to drm_plane structure
1070  * @error: error value to set
1071  */
1072 void dpu_plane_set_error(struct drm_plane *plane, bool error)
1073 {
1074 	struct dpu_plane *pdpu;
1075 
1076 	if (!plane)
1077 		return;
1078 
1079 	pdpu = to_dpu_plane(plane);
1080 	pdpu->is_error = error;
1081 }
1082 
1083 static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
1084 {
1085 	uint32_t src_flags;
1086 	struct dpu_plane *pdpu = to_dpu_plane(plane);
1087 	struct drm_plane_state *state = plane->state;
1088 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
1089 	struct drm_crtc *crtc = state->crtc;
1090 	struct drm_framebuffer *fb = state->fb;
1091 	bool is_rt_pipe, update_qos_remap;
1092 	const struct dpu_format *fmt =
1093 		to_dpu_format(msm_framebuffer_format(fb));
1094 
1095 	memset(&(pdpu->pipe_cfg), 0, sizeof(struct dpu_hw_pipe_cfg));
1096 
1097 	_dpu_plane_set_scanout(plane, pstate, &pdpu->pipe_cfg, fb);
1098 
1099 	pstate->pending = true;
1100 
1101 	is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
1102 	_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
1103 
1104 	DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
1105 			", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
1106 			crtc->base.id, DRM_RECT_ARG(&state->dst),
1107 			(char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
1108 
1109 	pdpu->pipe_cfg.src_rect = state->src;
1110 
1111 	/* state->src is 16.16, src_rect is not */
1112 	pdpu->pipe_cfg.src_rect.x1 >>= 16;
1113 	pdpu->pipe_cfg.src_rect.x2 >>= 16;
1114 	pdpu->pipe_cfg.src_rect.y1 >>= 16;
1115 	pdpu->pipe_cfg.src_rect.y2 >>= 16;
1116 
1117 	pdpu->pipe_cfg.dst_rect = state->dst;
1118 
1119 	_dpu_plane_setup_scaler(pdpu, pstate, fmt, false);
1120 
1121 	/* override for color fill */
1122 	if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
1123 		/* skip remaining processing on color fill */
1124 		return;
1125 	}
1126 
1127 	if (pdpu->pipe_hw->ops.setup_rects) {
1128 		pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
1129 				&pdpu->pipe_cfg,
1130 				pstate->multirect_index);
1131 	}
1132 
1133 	if (pdpu->pipe_hw->ops.setup_pe &&
1134 			(pstate->multirect_index != DPU_SSPP_RECT_1))
1135 		pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
1136 				&pstate->pixel_ext);
1137 
1138 	/**
1139 	 * when programmed in multirect mode, scalar block will be
1140 	 * bypassed. Still we need to update alpha and bitwidth
1141 	 * ONLY for RECT0
1142 	 */
1143 	if (pdpu->pipe_hw->ops.setup_scaler &&
1144 			pstate->multirect_index != DPU_SSPP_RECT_1)
1145 		pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
1146 				&pdpu->pipe_cfg, &pstate->pixel_ext,
1147 				&pstate->scaler3_cfg);
1148 
1149 	if (pdpu->pipe_hw->ops.setup_multirect)
1150 		pdpu->pipe_hw->ops.setup_multirect(
1151 				pdpu->pipe_hw,
1152 				pstate->multirect_index,
1153 				pstate->multirect_mode);
1154 
1155 	if (pdpu->pipe_hw->ops.setup_format) {
1156 		unsigned int rotation;
1157 
1158 		src_flags = 0x0;
1159 
1160 		rotation = drm_rotation_simplify(state->rotation,
1161 						 DRM_MODE_ROTATE_0 |
1162 						 DRM_MODE_REFLECT_X |
1163 						 DRM_MODE_REFLECT_Y);
1164 
1165 		if (rotation & DRM_MODE_REFLECT_X)
1166 			src_flags |= DPU_SSPP_FLIP_LR;
1167 
1168 		if (rotation & DRM_MODE_REFLECT_Y)
1169 			src_flags |= DPU_SSPP_FLIP_UD;
1170 
1171 		/* update format */
1172 		pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags,
1173 				pstate->multirect_index);
1174 
1175 		if (pdpu->pipe_hw->ops.setup_cdp) {
1176 			struct dpu_hw_pipe_cdp_cfg *cdp_cfg = &pstate->cdp_cfg;
1177 
1178 			memset(cdp_cfg, 0, sizeof(struct dpu_hw_pipe_cdp_cfg));
1179 
1180 			cdp_cfg->enable = pdpu->catalog->perf.cdp_cfg
1181 					[DPU_PERF_CDP_USAGE_RT].rd_enable;
1182 			cdp_cfg->ubwc_meta_enable =
1183 					DPU_FORMAT_IS_UBWC(fmt);
1184 			cdp_cfg->tile_amortize_enable =
1185 					DPU_FORMAT_IS_UBWC(fmt) ||
1186 					DPU_FORMAT_IS_TILE(fmt);
1187 			cdp_cfg->preload_ahead = DPU_SSPP_CDP_PRELOAD_AHEAD_64;
1188 
1189 			pdpu->pipe_hw->ops.setup_cdp(pdpu->pipe_hw, cdp_cfg);
1190 		}
1191 
1192 		/* update csc */
1193 		if (DPU_FORMAT_IS_YUV(fmt))
1194 			_dpu_plane_setup_csc(pdpu);
1195 		else
1196 			pdpu->csc_ptr = NULL;
1197 	}
1198 
1199 	_dpu_plane_set_qos_lut(plane, fb);
1200 	_dpu_plane_set_danger_lut(plane, fb);
1201 
1202 	if (plane->type != DRM_PLANE_TYPE_CURSOR) {
1203 		_dpu_plane_set_qos_ctrl(plane, true, DPU_PLANE_QOS_PANIC_CTRL);
1204 		_dpu_plane_set_ot_limit(plane, crtc);
1205 	}
1206 
1207 	update_qos_remap = (is_rt_pipe != pdpu->is_rt_pipe) ||
1208 			pstate->needs_qos_remap;
1209 
1210 	if (update_qos_remap) {
1211 		if (is_rt_pipe != pdpu->is_rt_pipe)
1212 			pdpu->is_rt_pipe = is_rt_pipe;
1213 		else if (pstate->needs_qos_remap)
1214 			pstate->needs_qos_remap = false;
1215 		_dpu_plane_set_qos_remap(plane);
1216 	}
1217 
1218 	_dpu_plane_calc_bw(plane, fb);
1219 
1220 	_dpu_plane_calc_clk(plane);
1221 }
1222 
1223 static void _dpu_plane_atomic_disable(struct drm_plane *plane)
1224 {
1225 	struct dpu_plane *pdpu = to_dpu_plane(plane);
1226 	struct drm_plane_state *state = plane->state;
1227 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
1228 
1229 	trace_dpu_plane_disable(DRMID(plane), is_dpu_plane_virtual(plane),
1230 				pstate->multirect_mode);
1231 
1232 	pstate->pending = true;
1233 
1234 	if (is_dpu_plane_virtual(plane) &&
1235 			pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_multirect)
1236 		pdpu->pipe_hw->ops.setup_multirect(pdpu->pipe_hw,
1237 				DPU_SSPP_RECT_SOLO, DPU_SSPP_MULTIRECT_NONE);
1238 }
1239 
1240 static void dpu_plane_atomic_update(struct drm_plane *plane,
1241 				struct drm_atomic_state *state)
1242 {
1243 	struct dpu_plane *pdpu = to_dpu_plane(plane);
1244 	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
1245 									   plane);
1246 
1247 	pdpu->is_error = false;
1248 
1249 	DPU_DEBUG_PLANE(pdpu, "\n");
1250 
1251 	if (!new_state->visible) {
1252 		_dpu_plane_atomic_disable(plane);
1253 	} else {
1254 		dpu_plane_sspp_atomic_update(plane);
1255 	}
1256 }
1257 
1258 static void dpu_plane_destroy(struct drm_plane *plane)
1259 {
1260 	struct dpu_plane *pdpu = plane ? to_dpu_plane(plane) : NULL;
1261 
1262 	DPU_DEBUG_PLANE(pdpu, "\n");
1263 
1264 	if (pdpu) {
1265 		_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
1266 
1267 		mutex_destroy(&pdpu->lock);
1268 
1269 		/* this will destroy the states as well */
1270 		drm_plane_cleanup(plane);
1271 
1272 		dpu_hw_sspp_destroy(pdpu->pipe_hw);
1273 
1274 		kfree(pdpu);
1275 	}
1276 }
1277 
1278 static void dpu_plane_destroy_state(struct drm_plane *plane,
1279 		struct drm_plane_state *state)
1280 {
1281 	__drm_atomic_helper_plane_destroy_state(state);
1282 	kfree(to_dpu_plane_state(state));
1283 }
1284 
1285 static struct drm_plane_state *
1286 dpu_plane_duplicate_state(struct drm_plane *plane)
1287 {
1288 	struct dpu_plane *pdpu;
1289 	struct dpu_plane_state *pstate;
1290 	struct dpu_plane_state *old_state;
1291 
1292 	if (!plane) {
1293 		DPU_ERROR("invalid plane\n");
1294 		return NULL;
1295 	} else if (!plane->state) {
1296 		DPU_ERROR("invalid plane state\n");
1297 		return NULL;
1298 	}
1299 
1300 	old_state = to_dpu_plane_state(plane->state);
1301 	pdpu = to_dpu_plane(plane);
1302 	pstate = kmemdup(old_state, sizeof(*old_state), GFP_KERNEL);
1303 	if (!pstate) {
1304 		DPU_ERROR_PLANE(pdpu, "failed to allocate state\n");
1305 		return NULL;
1306 	}
1307 
1308 	DPU_DEBUG_PLANE(pdpu, "\n");
1309 
1310 	pstate->pending = false;
1311 
1312 	__drm_atomic_helper_plane_duplicate_state(plane, &pstate->base);
1313 
1314 	return &pstate->base;
1315 }
1316 
1317 static void dpu_plane_reset(struct drm_plane *plane)
1318 {
1319 	struct dpu_plane *pdpu;
1320 	struct dpu_plane_state *pstate;
1321 
1322 	if (!plane) {
1323 		DPU_ERROR("invalid plane\n");
1324 		return;
1325 	}
1326 
1327 	pdpu = to_dpu_plane(plane);
1328 	DPU_DEBUG_PLANE(pdpu, "\n");
1329 
1330 	/* remove previous state, if present */
1331 	if (plane->state) {
1332 		dpu_plane_destroy_state(plane, plane->state);
1333 		plane->state = NULL;
1334 	}
1335 
1336 	pstate = kzalloc(sizeof(*pstate), GFP_KERNEL);
1337 	if (!pstate) {
1338 		DPU_ERROR_PLANE(pdpu, "failed to allocate state\n");
1339 		return;
1340 	}
1341 
1342 	__drm_atomic_helper_plane_reset(plane, &pstate->base);
1343 }
1344 
1345 #ifdef CONFIG_DEBUG_FS
1346 static void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
1347 {
1348 	struct dpu_plane *pdpu = to_dpu_plane(plane);
1349 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
1350 
1351 	if (!pdpu->is_rt_pipe)
1352 		return;
1353 
1354 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
1355 	_dpu_plane_set_qos_ctrl(plane, enable, DPU_PLANE_QOS_PANIC_CTRL);
1356 	pm_runtime_put_sync(&dpu_kms->pdev->dev);
1357 }
1358 
1359 static ssize_t _dpu_plane_danger_read(struct file *file,
1360 			char __user *buff, size_t count, loff_t *ppos)
1361 {
1362 	struct dpu_kms *kms = file->private_data;
1363 	int len;
1364 	char buf[40];
1365 
1366 	len = scnprintf(buf, sizeof(buf), "%d\n", !kms->has_danger_ctrl);
1367 
1368 	return simple_read_from_buffer(buff, count, ppos, buf, len);
1369 }
1370 
1371 static void _dpu_plane_set_danger_state(struct dpu_kms *kms, bool enable)
1372 {
1373 	struct drm_plane *plane;
1374 
1375 	drm_for_each_plane(plane, kms->dev) {
1376 		if (plane->fb && plane->state) {
1377 			dpu_plane_danger_signal_ctrl(plane, enable);
1378 			DPU_DEBUG("plane:%d img:%dx%d ",
1379 				plane->base.id, plane->fb->width,
1380 				plane->fb->height);
1381 			DPU_DEBUG("src[%d,%d,%d,%d] dst[%d,%d,%d,%d]\n",
1382 				plane->state->src_x >> 16,
1383 				plane->state->src_y >> 16,
1384 				plane->state->src_w >> 16,
1385 				plane->state->src_h >> 16,
1386 				plane->state->crtc_x, plane->state->crtc_y,
1387 				plane->state->crtc_w, plane->state->crtc_h);
1388 		} else {
1389 			DPU_DEBUG("Inactive plane:%d\n", plane->base.id);
1390 		}
1391 	}
1392 }
1393 
1394 static ssize_t _dpu_plane_danger_write(struct file *file,
1395 		    const char __user *user_buf, size_t count, loff_t *ppos)
1396 {
1397 	struct dpu_kms *kms = file->private_data;
1398 	int disable_panic;
1399 	int ret;
1400 
1401 	ret = kstrtouint_from_user(user_buf, count, 0, &disable_panic);
1402 	if (ret)
1403 		return ret;
1404 
1405 	if (disable_panic) {
1406 		/* Disable panic signal for all active pipes */
1407 		DPU_DEBUG("Disabling danger:\n");
1408 		_dpu_plane_set_danger_state(kms, false);
1409 		kms->has_danger_ctrl = false;
1410 	} else {
1411 		/* Enable panic signal for all active pipes */
1412 		DPU_DEBUG("Enabling danger:\n");
1413 		kms->has_danger_ctrl = true;
1414 		_dpu_plane_set_danger_state(kms, true);
1415 	}
1416 
1417 	return count;
1418 }
1419 
1420 static const struct file_operations dpu_plane_danger_enable = {
1421 	.open = simple_open,
1422 	.read = _dpu_plane_danger_read,
1423 	.write = _dpu_plane_danger_write,
1424 };
1425 
1426 static int _dpu_plane_init_debugfs(struct drm_plane *plane)
1427 {
1428 	struct dpu_plane *pdpu = to_dpu_plane(plane);
1429 	struct dpu_kms *kms = _dpu_plane_get_kms(plane);
1430 	const struct dpu_sspp_cfg *cfg = pdpu->pipe_hw->cap;
1431 	const struct dpu_sspp_sub_blks *sblk = cfg->sblk;
1432 
1433 	/* create overall sub-directory for the pipe */
1434 	pdpu->debugfs_root =
1435 		debugfs_create_dir(pdpu->pipe_name,
1436 				plane->dev->primary->debugfs_root);
1437 
1438 	/* don't error check these */
1439 	debugfs_create_x32("features", 0600,
1440 			pdpu->debugfs_root, &pdpu->features);
1441 
1442 	/* add register dump support */
1443 	dpu_debugfs_setup_regset32(&pdpu->debugfs_src,
1444 			sblk->src_blk.base + cfg->base,
1445 			sblk->src_blk.len,
1446 			kms);
1447 	dpu_debugfs_create_regset32("src_blk", 0400,
1448 			pdpu->debugfs_root, &pdpu->debugfs_src);
1449 
1450 	if (cfg->features & BIT(DPU_SSPP_SCALER_QSEED3) ||
1451 			cfg->features & BIT(DPU_SSPP_SCALER_QSEED3LITE) ||
1452 			cfg->features & BIT(DPU_SSPP_SCALER_QSEED2) ||
1453 			cfg->features & BIT(DPU_SSPP_SCALER_QSEED4)) {
1454 		dpu_debugfs_setup_regset32(&pdpu->debugfs_scaler,
1455 				sblk->scaler_blk.base + cfg->base,
1456 				sblk->scaler_blk.len,
1457 				kms);
1458 		dpu_debugfs_create_regset32("scaler_blk", 0400,
1459 				pdpu->debugfs_root,
1460 				&pdpu->debugfs_scaler);
1461 		debugfs_create_bool("default_scaling",
1462 				0600,
1463 				pdpu->debugfs_root,
1464 				&pdpu->debugfs_default_scale);
1465 	}
1466 
1467 	if (cfg->features & BIT(DPU_SSPP_CSC) ||
1468 			cfg->features & BIT(DPU_SSPP_CSC_10BIT)) {
1469 		dpu_debugfs_setup_regset32(&pdpu->debugfs_csc,
1470 				sblk->csc_blk.base + cfg->base,
1471 				sblk->csc_blk.len,
1472 				kms);
1473 		dpu_debugfs_create_regset32("csc_blk", 0400,
1474 				pdpu->debugfs_root, &pdpu->debugfs_csc);
1475 	}
1476 
1477 	debugfs_create_u32("xin_id",
1478 			0400,
1479 			pdpu->debugfs_root,
1480 			(u32 *) &cfg->xin_id);
1481 	debugfs_create_u32("clk_ctrl",
1482 			0400,
1483 			pdpu->debugfs_root,
1484 			(u32 *) &cfg->clk_ctrl);
1485 	debugfs_create_x32("creq_vblank",
1486 			0600,
1487 			pdpu->debugfs_root,
1488 			(u32 *) &sblk->creq_vblank);
1489 	debugfs_create_x32("danger_vblank",
1490 			0600,
1491 			pdpu->debugfs_root,
1492 			(u32 *) &sblk->danger_vblank);
1493 
1494 	debugfs_create_file("disable_danger",
1495 			0600,
1496 			pdpu->debugfs_root,
1497 			kms, &dpu_plane_danger_enable);
1498 
1499 	return 0;
1500 }
1501 #else
1502 static int _dpu_plane_init_debugfs(struct drm_plane *plane)
1503 {
1504 	return 0;
1505 }
1506 #endif
1507 
1508 static int dpu_plane_late_register(struct drm_plane *plane)
1509 {
1510 	return _dpu_plane_init_debugfs(plane);
1511 }
1512 
1513 static void dpu_plane_early_unregister(struct drm_plane *plane)
1514 {
1515 	struct dpu_plane *pdpu = to_dpu_plane(plane);
1516 
1517 	debugfs_remove_recursive(pdpu->debugfs_root);
1518 }
1519 
1520 static bool dpu_plane_format_mod_supported(struct drm_plane *plane,
1521 		uint32_t format, uint64_t modifier)
1522 {
1523 	if (modifier == DRM_FORMAT_MOD_LINEAR)
1524 		return true;
1525 
1526 	if (modifier == DRM_FORMAT_MOD_QCOM_COMPRESSED) {
1527 		int i;
1528 		for (i = 0; i < ARRAY_SIZE(qcom_compressed_supported_formats); i++) {
1529 			if (format == qcom_compressed_supported_formats[i])
1530 				return true;
1531 		}
1532 	}
1533 
1534 	return false;
1535 }
1536 
1537 static const struct drm_plane_funcs dpu_plane_funcs = {
1538 		.update_plane = drm_atomic_helper_update_plane,
1539 		.disable_plane = drm_atomic_helper_disable_plane,
1540 		.destroy = dpu_plane_destroy,
1541 		.reset = dpu_plane_reset,
1542 		.atomic_duplicate_state = dpu_plane_duplicate_state,
1543 		.atomic_destroy_state = dpu_plane_destroy_state,
1544 		.late_register = dpu_plane_late_register,
1545 		.early_unregister = dpu_plane_early_unregister,
1546 		.format_mod_supported = dpu_plane_format_mod_supported,
1547 };
1548 
1549 static const struct drm_plane_helper_funcs dpu_plane_helper_funcs = {
1550 		.prepare_fb = dpu_plane_prepare_fb,
1551 		.cleanup_fb = dpu_plane_cleanup_fb,
1552 		.atomic_check = dpu_plane_atomic_check,
1553 		.atomic_update = dpu_plane_atomic_update,
1554 };
1555 
1556 enum dpu_sspp dpu_plane_pipe(struct drm_plane *plane)
1557 {
1558 	return plane ? to_dpu_plane(plane)->pipe : SSPP_NONE;
1559 }
1560 
1561 bool is_dpu_plane_virtual(struct drm_plane *plane)
1562 {
1563 	return plane ? to_dpu_plane(plane)->is_virtual : false;
1564 }
1565 
1566 /* initialize plane */
1567 struct drm_plane *dpu_plane_init(struct drm_device *dev,
1568 		uint32_t pipe, enum drm_plane_type type,
1569 		unsigned long possible_crtcs, u32 master_plane_id)
1570 {
1571 	struct drm_plane *plane = NULL, *master_plane = NULL;
1572 	const uint32_t *format_list;
1573 	struct dpu_plane *pdpu;
1574 	struct msm_drm_private *priv = dev->dev_private;
1575 	struct dpu_kms *kms = to_dpu_kms(priv->kms);
1576 	int zpos_max = DPU_ZPOS_MAX;
1577 	uint32_t num_formats;
1578 	int ret = -EINVAL;
1579 
1580 	/* create and zero local structure */
1581 	pdpu = kzalloc(sizeof(*pdpu), GFP_KERNEL);
1582 	if (!pdpu) {
1583 		DPU_ERROR("[%u]failed to allocate local plane struct\n", pipe);
1584 		ret = -ENOMEM;
1585 		return ERR_PTR(ret);
1586 	}
1587 
1588 	/* cache local stuff for later */
1589 	plane = &pdpu->base;
1590 	pdpu->pipe = pipe;
1591 	pdpu->is_virtual = (master_plane_id != 0);
1592 	INIT_LIST_HEAD(&pdpu->mplane_list);
1593 	master_plane = drm_plane_find(dev, NULL, master_plane_id);
1594 	if (master_plane) {
1595 		struct dpu_plane *mpdpu = to_dpu_plane(master_plane);
1596 
1597 		list_add_tail(&pdpu->mplane_list, &mpdpu->mplane_list);
1598 	}
1599 
1600 	/* initialize underlying h/w driver */
1601 	pdpu->pipe_hw = dpu_hw_sspp_init(pipe, kms->mmio, kms->catalog,
1602 							master_plane_id != 0);
1603 	if (IS_ERR(pdpu->pipe_hw)) {
1604 		DPU_ERROR("[%u]SSPP init failed\n", pipe);
1605 		ret = PTR_ERR(pdpu->pipe_hw);
1606 		goto clean_plane;
1607 	} else if (!pdpu->pipe_hw->cap || !pdpu->pipe_hw->cap->sblk) {
1608 		DPU_ERROR("[%u]SSPP init returned invalid cfg\n", pipe);
1609 		goto clean_sspp;
1610 	}
1611 
1612 	/* cache features mask for later */
1613 	pdpu->features = pdpu->pipe_hw->cap->features;
1614 	pdpu->pipe_sblk = pdpu->pipe_hw->cap->sblk;
1615 	if (!pdpu->pipe_sblk) {
1616 		DPU_ERROR("[%u]invalid sblk\n", pipe);
1617 		goto clean_sspp;
1618 	}
1619 
1620 	if (pdpu->is_virtual) {
1621 		format_list = pdpu->pipe_sblk->virt_format_list;
1622 		num_formats = pdpu->pipe_sblk->virt_num_formats;
1623 	}
1624 	else {
1625 		format_list = pdpu->pipe_sblk->format_list;
1626 		num_formats = pdpu->pipe_sblk->num_formats;
1627 	}
1628 
1629 	ret = drm_universal_plane_init(dev, plane, 0xff, &dpu_plane_funcs,
1630 				format_list, num_formats,
1631 				supported_format_modifiers, type, NULL);
1632 	if (ret)
1633 		goto clean_sspp;
1634 
1635 	pdpu->catalog = kms->catalog;
1636 
1637 	if (kms->catalog->mixer_count &&
1638 		kms->catalog->mixer[0].sblk->maxblendstages) {
1639 		zpos_max = kms->catalog->mixer[0].sblk->maxblendstages - 1;
1640 		if (zpos_max > DPU_STAGE_MAX - DPU_STAGE_0 - 1)
1641 			zpos_max = DPU_STAGE_MAX - DPU_STAGE_0 - 1;
1642 	}
1643 
1644 	ret = drm_plane_create_zpos_property(plane, 0, 0, zpos_max);
1645 	if (ret)
1646 		DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
1647 
1648 	drm_plane_create_alpha_property(plane);
1649 	drm_plane_create_blend_mode_property(plane,
1650 			BIT(DRM_MODE_BLEND_PIXEL_NONE) |
1651 			BIT(DRM_MODE_BLEND_PREMULTI) |
1652 			BIT(DRM_MODE_BLEND_COVERAGE));
1653 
1654 	drm_plane_create_rotation_property(plane,
1655 			DRM_MODE_ROTATE_0,
1656 			DRM_MODE_ROTATE_0 |
1657 			DRM_MODE_ROTATE_180 |
1658 			DRM_MODE_REFLECT_X |
1659 			DRM_MODE_REFLECT_Y);
1660 
1661 	drm_plane_enable_fb_damage_clips(plane);
1662 
1663 	/* success! finalize initialization */
1664 	drm_plane_helper_add(plane, &dpu_plane_helper_funcs);
1665 
1666 	/* save user friendly pipe name for later */
1667 	snprintf(pdpu->pipe_name, DPU_NAME_SIZE, "plane%u", plane->base.id);
1668 
1669 	mutex_init(&pdpu->lock);
1670 
1671 	DPU_DEBUG("%s created for pipe:%u id:%u virtual:%u\n", pdpu->pipe_name,
1672 					pipe, plane->base.id, master_plane_id);
1673 	return plane;
1674 
1675 clean_sspp:
1676 	if (pdpu && pdpu->pipe_hw)
1677 		dpu_hw_sspp_destroy(pdpu->pipe_hw);
1678 clean_plane:
1679 	kfree(pdpu);
1680 	return ERR_PTR(ret);
1681 }
1682