1 /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. 2 * 3 * This program is free software; you can redistribute it and/or modify 4 * it under the terms of the GNU General Public License version 2 and 5 * only version 2 as published by the Free Software Foundation. 6 * 7 * This program is distributed in the hope that it will be useful, 8 * but WITHOUT ANY WARRANTY; without even the implied warranty of 9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 10 * GNU General Public License for more details. 11 */ 12 13 #ifndef _DPU_HW_PINGPONG_H 14 #define _DPU_HW_PINGPONG_H 15 16 #include "dpu_hw_catalog.h" 17 #include "dpu_hw_mdss.h" 18 #include "dpu_hw_util.h" 19 #include "dpu_hw_blk.h" 20 21 struct dpu_hw_pingpong; 22 23 struct dpu_hw_tear_check { 24 /* 25 * This is ratio of MDP VSYNC clk freq(Hz) to 26 * refresh rate divided by no of lines 27 */ 28 u32 vsync_count; 29 u32 sync_cfg_height; 30 u32 vsync_init_val; 31 u32 sync_threshold_start; 32 u32 sync_threshold_continue; 33 u32 start_pos; 34 u32 rd_ptr_irq; 35 u8 hw_vsync_mode; 36 }; 37 38 struct dpu_hw_pp_vsync_info { 39 u32 rd_ptr_init_val; /* value of rd pointer at vsync edge */ 40 u32 rd_ptr_frame_count; /* num frames sent since enabling interface */ 41 u32 rd_ptr_line_count; /* current line on panel (rd ptr) */ 42 u32 wr_ptr_line_count; /* current line within pp fifo (wr ptr) */ 43 }; 44 45 /** 46 * 47 * struct dpu_hw_pingpong_ops : Interface to the pingpong Hw driver functions 48 * Assumption is these functions will be called after clocks are enabled 49 * @setup_tearcheck : program tear check values 50 * @enable_tearcheck : enables tear check 51 * @get_vsync_info : retries timing info of the panel 52 * @setup_dither : function to program the dither hw block 53 * @get_line_count: obtain current vertical line counter 54 */ 55 struct dpu_hw_pingpong_ops { 56 /** 57 * enables vysnc generation and sets up init value of 58 * read pointer and programs the tear check cofiguration 59 */ 60 int (*setup_tearcheck)(struct dpu_hw_pingpong *pp, 61 struct dpu_hw_tear_check *cfg); 62 63 /** 64 * enables tear check block 65 */ 66 int (*enable_tearcheck)(struct dpu_hw_pingpong *pp, 67 bool enable); 68 69 /** 70 * read, modify, write to either set or clear listening to external TE 71 * @Return: 1 if TE was originally connected, 0 if not, or -ERROR 72 */ 73 int (*connect_external_te)(struct dpu_hw_pingpong *pp, 74 bool enable_external_te); 75 76 /** 77 * provides the programmed and current 78 * line_count 79 */ 80 int (*get_vsync_info)(struct dpu_hw_pingpong *pp, 81 struct dpu_hw_pp_vsync_info *info); 82 83 /** 84 * poll until write pointer transmission starts 85 * @Return: 0 on success, -ETIMEDOUT on timeout 86 */ 87 int (*poll_timeout_wr_ptr)(struct dpu_hw_pingpong *pp, u32 timeout_us); 88 89 /** 90 * Obtain current vertical line counter 91 */ 92 u32 (*get_line_count)(struct dpu_hw_pingpong *pp); 93 }; 94 95 struct dpu_hw_pingpong { 96 struct dpu_hw_blk base; 97 struct dpu_hw_blk_reg_map hw; 98 99 /* pingpong */ 100 enum dpu_pingpong idx; 101 const struct dpu_pingpong_cfg *caps; 102 103 /* ops */ 104 struct dpu_hw_pingpong_ops ops; 105 }; 106 107 /** 108 * dpu_hw_pingpong_init - initializes the pingpong driver for the passed 109 * pingpong idx. 110 * @idx: Pingpong index for which driver object is required 111 * @addr: Mapped register io address of MDP 112 * @m: Pointer to mdss catalog data 113 * Returns: Error code or allocated dpu_hw_pingpong context 114 */ 115 struct dpu_hw_pingpong *dpu_hw_pingpong_init(enum dpu_pingpong idx, 116 void __iomem *addr, 117 struct dpu_mdss_cfg *m); 118 119 /** 120 * dpu_hw_pingpong_destroy - destroys pingpong driver context 121 * should be called to free the context 122 * @pp: Pointer to PP driver context returned by dpu_hw_pingpong_init 123 */ 124 void dpu_hw_pingpong_destroy(struct dpu_hw_pingpong *pp); 125 126 #endif /*_DPU_HW_PINGPONG_H */ 127