1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. 4 */ 5 6 #ifndef __DPU_ENCODER_PHYS_H__ 7 #define __DPU_ENCODER_PHYS_H__ 8 9 #include <linux/jiffies.h> 10 11 #include "dpu_kms.h" 12 #include "dpu_hw_intf.h" 13 #include "dpu_hw_pingpong.h" 14 #include "dpu_hw_ctl.h" 15 #include "dpu_hw_top.h" 16 #include "dpu_encoder.h" 17 #include "dpu_crtc.h" 18 19 #define DPU_ENCODER_NAME_MAX 16 20 21 /* wait for at most 2 vsync for lowest refresh rate (24hz) */ 22 #define KICKOFF_TIMEOUT_MS 84 23 #define KICKOFF_TIMEOUT_JIFFIES msecs_to_jiffies(KICKOFF_TIMEOUT_MS) 24 25 /** 26 * enum dpu_enc_split_role - Role this physical encoder will play in a 27 * split-panel configuration, where one panel is master, and others slaves. 28 * Masters have extra responsibilities, like managing the VBLANK IRQ. 29 * @ENC_ROLE_SOLO: This is the one and only panel. This encoder is master. 30 * @ENC_ROLE_MASTER: This encoder is the master of a split panel config. 31 * @ENC_ROLE_SLAVE: This encoder is not the master of a split panel config. 32 */ 33 enum dpu_enc_split_role { 34 ENC_ROLE_SOLO, 35 ENC_ROLE_MASTER, 36 ENC_ROLE_SLAVE, 37 }; 38 39 /** 40 * enum dpu_enc_enable_state - current enabled state of the physical encoder 41 * @DPU_ENC_DISABLING: Encoder transitioning to disable state 42 * Events bounding transition are encoder type specific 43 * @DPU_ENC_DISABLED: Encoder is disabled 44 * @DPU_ENC_ENABLING: Encoder transitioning to enabled 45 * Events bounding transition are encoder type specific 46 * @DPU_ENC_ENABLED: Encoder is enabled 47 * @DPU_ENC_ERR_NEEDS_HW_RESET: Encoder is enabled, but requires a hw_reset 48 * to recover from a previous error 49 */ 50 enum dpu_enc_enable_state { 51 DPU_ENC_DISABLING, 52 DPU_ENC_DISABLED, 53 DPU_ENC_ENABLING, 54 DPU_ENC_ENABLED, 55 DPU_ENC_ERR_NEEDS_HW_RESET 56 }; 57 58 struct dpu_encoder_phys; 59 60 /** 61 * struct dpu_encoder_virt_ops - Interface the containing virtual encoder 62 * provides for the physical encoders to use to callback. 63 * @handle_vblank_virt: Notify virtual encoder of vblank IRQ reception 64 * Note: This is called from IRQ handler context. 65 * @handle_underrun_virt: Notify virtual encoder of underrun IRQ reception 66 * Note: This is called from IRQ handler context. 67 * @handle_frame_done: Notify virtual encoder that this phys encoder 68 * completes last request frame. 69 */ 70 struct dpu_encoder_virt_ops { 71 void (*handle_vblank_virt)(struct drm_encoder *, 72 struct dpu_encoder_phys *phys); 73 void (*handle_underrun_virt)(struct drm_encoder *, 74 struct dpu_encoder_phys *phys); 75 void (*handle_frame_done)(struct drm_encoder *, 76 struct dpu_encoder_phys *phys, u32 event); 77 }; 78 79 /** 80 * struct dpu_encoder_phys_ops - Interface the physical encoders provide to 81 * the containing virtual encoder. 82 * @late_register: DRM Call. Add Userspace interfaces, debugfs. 83 * @prepare_commit: MSM Atomic Call, start of atomic commit sequence 84 * @is_master: Whether this phys_enc is the current master 85 * encoder. Can be switched at enable time. Based 86 * on split_role and current mode (CMD/VID). 87 * @mode_fixup: DRM Call. Fixup a DRM mode. 88 * @mode_set: DRM Call. Set a DRM mode. 89 * This likely caches the mode, for use at enable. 90 * @enable: DRM Call. Enable a DRM mode. 91 * @disable: DRM Call. Disable mode. 92 * @atomic_check: DRM Call. Atomic check new DRM state. 93 * @destroy: DRM Call. Destroy and release resources. 94 * @get_hw_resources: Populate the structure with the hardware 95 * resources that this phys_enc is using. 96 * Expect no overlap between phys_encs. 97 * @control_vblank_irq Register/Deregister for VBLANK IRQ 98 * @wait_for_commit_done: Wait for hardware to have flushed the 99 * current pending frames to hardware 100 * @wait_for_tx_complete: Wait for hardware to transfer the pixels 101 * to the panel 102 * @wait_for_vblank: Wait for VBLANK, for sub-driver internal use 103 * @prepare_for_kickoff: Do any work necessary prior to a kickoff 104 * For CMD encoder, may wait for previous tx done 105 * @handle_post_kickoff: Do any work necessary post-kickoff work 106 * @trigger_start: Process start event on physical encoder 107 * @needs_single_flush: Whether encoder slaves need to be flushed 108 * @irq_control: Handler to enable/disable all the encoder IRQs 109 * @prepare_idle_pc: phys encoder can update the vsync_enable status 110 * on idle power collapse prepare 111 * @restore: Restore all the encoder configs. 112 * @get_line_count: Obtain current vertical line count 113 */ 114 115 struct dpu_encoder_phys_ops { 116 int (*late_register)(struct dpu_encoder_phys *encoder, 117 struct dentry *debugfs_root); 118 void (*prepare_commit)(struct dpu_encoder_phys *encoder); 119 bool (*is_master)(struct dpu_encoder_phys *encoder); 120 bool (*mode_fixup)(struct dpu_encoder_phys *encoder, 121 const struct drm_display_mode *mode, 122 struct drm_display_mode *adjusted_mode); 123 void (*mode_set)(struct dpu_encoder_phys *encoder, 124 struct drm_display_mode *mode, 125 struct drm_display_mode *adjusted_mode); 126 void (*enable)(struct dpu_encoder_phys *encoder); 127 void (*disable)(struct dpu_encoder_phys *encoder); 128 int (*atomic_check)(struct dpu_encoder_phys *encoder, 129 struct drm_crtc_state *crtc_state, 130 struct drm_connector_state *conn_state); 131 void (*destroy)(struct dpu_encoder_phys *encoder); 132 void (*get_hw_resources)(struct dpu_encoder_phys *encoder, 133 struct dpu_encoder_hw_resources *hw_res); 134 int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable); 135 int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc); 136 int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc); 137 int (*wait_for_vblank)(struct dpu_encoder_phys *phys_enc); 138 void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc); 139 void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc); 140 void (*trigger_start)(struct dpu_encoder_phys *phys_enc); 141 bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc); 142 void (*irq_control)(struct dpu_encoder_phys *phys, bool enable); 143 void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc); 144 void (*restore)(struct dpu_encoder_phys *phys); 145 int (*get_line_count)(struct dpu_encoder_phys *phys); 146 int (*get_frame_count)(struct dpu_encoder_phys *phys); 147 }; 148 149 /** 150 * enum dpu_intr_idx - dpu encoder interrupt index 151 * @INTR_IDX_VSYNC: Vsync interrupt for video mode panel 152 * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel 153 * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel 154 * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel 155 */ 156 enum dpu_intr_idx { 157 INTR_IDX_VSYNC, 158 INTR_IDX_PINGPONG, 159 INTR_IDX_UNDERRUN, 160 INTR_IDX_CTL_START, 161 INTR_IDX_RDPTR, 162 INTR_IDX_MAX, 163 }; 164 165 /** 166 * dpu_encoder_irq - tracking structure for interrupts 167 * @name: string name of interrupt 168 * @intr_type: Encoder interrupt type 169 * @intr_idx: Encoder interrupt enumeration 170 * @hw_idx: HW Block ID 171 * @irq_idx: IRQ interface lookup index from DPU IRQ framework 172 * will be -EINVAL if IRQ is not registered 173 * @irq_cb: interrupt callback 174 */ 175 struct dpu_encoder_irq { 176 const char *name; 177 enum dpu_intr_type intr_type; 178 enum dpu_intr_idx intr_idx; 179 int hw_idx; 180 int irq_idx; 181 struct dpu_irq_callback cb; 182 }; 183 184 /** 185 * struct dpu_encoder_phys - physical encoder that drives a single INTF block 186 * tied to a specific panel / sub-panel. Abstract type, sub-classed by 187 * phys_vid or phys_cmd for video mode or command mode encs respectively. 188 * @parent: Pointer to the containing virtual encoder 189 * @connector: If a mode is set, cached pointer to the active connector 190 * @ops: Operations exposed to the virtual encoder 191 * @parent_ops: Callbacks exposed by the parent to the phys_enc 192 * @hw_mdptop: Hardware interface to the top registers 193 * @hw_ctl: Hardware interface to the ctl registers 194 * @hw_pp: Hardware interface to the ping pong registers 195 * @hw_intf: Hardware interface to the intf registers 196 * @dpu_kms: Pointer to the dpu_kms top level 197 * @cached_mode: DRM mode cached at mode_set time, acted on in enable 198 * @enabled: Whether the encoder has enabled and running a mode 199 * @split_role: Role to play in a split-panel configuration 200 * @intf_mode: Interface mode 201 * @intf_idx: Interface index on dpu hardware 202 * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes 203 * @enable_state: Enable state tracking 204 * @vblank_refcount: Reference count of vblank request 205 * @vsync_cnt: Vsync count for the physical encoder 206 * @underrun_cnt: Underrun count for the physical encoder 207 * @pending_kickoff_cnt: Atomic counter tracking the number of kickoffs 208 * vs. the number of done/vblank irqs. Should hover 209 * between 0-2 Incremented when a new kickoff is 210 * scheduled. Decremented in irq handler 211 * @pending_ctlstart_cnt: Atomic counter tracking the number of ctl start 212 * pending. 213 * @pending_kickoff_wq: Wait queue for blocking until kickoff completes 214 * @irq: IRQ tracking structures 215 */ 216 struct dpu_encoder_phys { 217 struct drm_encoder *parent; 218 struct drm_connector *connector; 219 struct dpu_encoder_phys_ops ops; 220 const struct dpu_encoder_virt_ops *parent_ops; 221 struct dpu_hw_mdp *hw_mdptop; 222 struct dpu_hw_ctl *hw_ctl; 223 struct dpu_hw_pingpong *hw_pp; 224 struct dpu_hw_intf *hw_intf; 225 struct dpu_kms *dpu_kms; 226 struct drm_display_mode cached_mode; 227 enum dpu_enc_split_role split_role; 228 enum dpu_intf_mode intf_mode; 229 enum dpu_intf intf_idx; 230 spinlock_t *enc_spinlock; 231 enum dpu_enc_enable_state enable_state; 232 atomic_t vblank_refcount; 233 atomic_t vsync_cnt; 234 atomic_t underrun_cnt; 235 atomic_t pending_ctlstart_cnt; 236 atomic_t pending_kickoff_cnt; 237 wait_queue_head_t pending_kickoff_wq; 238 struct dpu_encoder_irq irq[INTR_IDX_MAX]; 239 }; 240 241 static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) 242 { 243 atomic_inc_return(&phys->pending_ctlstart_cnt); 244 return atomic_inc_return(&phys->pending_kickoff_cnt); 245 } 246 247 /** 248 * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command 249 * mode specific operations 250 * @base: Baseclass physical encoder structure 251 * @intf_idx: Intf Block index used by this phys encoder 252 * @stream_sel: Stream selection for multi-stream interfaces 253 * @serialize_wait4pp: serialize wait4pp feature waits for pp_done interrupt 254 * after ctl_start instead of before next frame kickoff 255 * @pp_timeout_report_cnt: number of pingpong done irq timeout errors 256 * @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK 257 * @pending_vblank_wq: Wait queue for blocking until VBLANK received 258 */ 259 struct dpu_encoder_phys_cmd { 260 struct dpu_encoder_phys base; 261 int stream_sel; 262 bool serialize_wait4pp; 263 int pp_timeout_report_cnt; 264 atomic_t pending_vblank_cnt; 265 wait_queue_head_t pending_vblank_wq; 266 }; 267 268 /** 269 * struct dpu_enc_phys_init_params - initialization parameters for phys encs 270 * @dpu_kms: Pointer to the dpu_kms top level 271 * @parent: Pointer to the containing virtual encoder 272 * @parent_ops: Callbacks exposed by the parent to the phys_enc 273 * @split_role: Role to play in a split-panel configuration 274 * @intf_idx: Interface index this phys_enc will control 275 * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes 276 */ 277 struct dpu_enc_phys_init_params { 278 struct dpu_kms *dpu_kms; 279 struct drm_encoder *parent; 280 const struct dpu_encoder_virt_ops *parent_ops; 281 enum dpu_enc_split_role split_role; 282 enum dpu_intf intf_idx; 283 spinlock_t *enc_spinlock; 284 }; 285 286 /** 287 * dpu_encoder_wait_info - container for passing arguments to irq wait functions 288 * @wq: wait queue structure 289 * @atomic_cnt: wait until atomic_cnt equals zero 290 * @timeout_ms: timeout value in milliseconds 291 */ 292 struct dpu_encoder_wait_info { 293 wait_queue_head_t *wq; 294 atomic_t *atomic_cnt; 295 s64 timeout_ms; 296 }; 297 298 /** 299 * dpu_encoder_phys_vid_init - Construct a new video mode physical encoder 300 * @p: Pointer to init params structure 301 * Return: Error code or newly allocated encoder 302 */ 303 struct dpu_encoder_phys *dpu_encoder_phys_vid_init( 304 struct dpu_enc_phys_init_params *p); 305 306 /** 307 * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder 308 * @p: Pointer to init params structure 309 * Return: Error code or newly allocated encoder 310 */ 311 struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( 312 struct dpu_enc_phys_init_params *p); 313 314 /** 315 * dpu_encoder_helper_trigger_start - control start helper function 316 * This helper function may be optionally specified by physical 317 * encoders if they require ctl_start triggering. 318 * @phys_enc: Pointer to physical encoder structure 319 */ 320 void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc); 321 322 static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( 323 struct dpu_encoder_phys *phys_enc) 324 { 325 struct dpu_crtc_state *dpu_cstate; 326 327 if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING) 328 return BLEND_3D_NONE; 329 330 dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state); 331 332 if (phys_enc->split_role == ENC_ROLE_SOLO && 333 dpu_cstate->num_mixers == CRTC_DUAL_MIXERS) 334 return BLEND_3D_H_ROW_INT; 335 336 return BLEND_3D_NONE; 337 } 338 339 /** 340 * dpu_encoder_helper_split_config - split display configuration helper function 341 * This helper function may be used by physical encoders to configure 342 * the split display related registers. 343 * @phys_enc: Pointer to physical encoder structure 344 * @interface: enum dpu_intf setting 345 */ 346 void dpu_encoder_helper_split_config( 347 struct dpu_encoder_phys *phys_enc, 348 enum dpu_intf interface); 349 350 /** 351 * dpu_encoder_helper_report_irq_timeout - utility to report error that irq has 352 * timed out, including reporting frame error event to crtc and debug dump 353 * @phys_enc: Pointer to physical encoder structure 354 * @intr_idx: Failing interrupt index 355 */ 356 void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc, 357 enum dpu_intr_idx intr_idx); 358 359 /** 360 * dpu_encoder_helper_wait_for_irq - utility to wait on an irq. 361 * note: will call dpu_encoder_helper_wait_for_irq on timeout 362 * @phys_enc: Pointer to physical encoder structure 363 * @intr_idx: encoder interrupt index 364 * @wait_info: wait info struct 365 * @Return: 0 or -ERROR 366 */ 367 int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, 368 enum dpu_intr_idx intr_idx, 369 struct dpu_encoder_wait_info *wait_info); 370 371 /** 372 * dpu_encoder_helper_register_irq - register and enable an irq 373 * @phys_enc: Pointer to physical encoder structure 374 * @intr_idx: encoder interrupt index 375 * @Return: 0 or -ERROR 376 */ 377 int dpu_encoder_helper_register_irq(struct dpu_encoder_phys *phys_enc, 378 enum dpu_intr_idx intr_idx); 379 380 /** 381 * dpu_encoder_helper_unregister_irq - unregister and disable an irq 382 * @phys_enc: Pointer to physical encoder structure 383 * @intr_idx: encoder interrupt index 384 * @Return: 0 or -ERROR 385 */ 386 int dpu_encoder_helper_unregister_irq(struct dpu_encoder_phys *phys_enc, 387 enum dpu_intr_idx intr_idx); 388 389 #endif /* __dpu_encoder_phys_H__ */ 390