xref: /openbmc/linux/drivers/gpu/drm/meson/meson_vpp.c (revision bbbe775e)
1 /*
2  * Copyright (C) 2016 BayLibre, SAS
3  * Author: Neil Armstrong <narmstrong@baylibre.com>
4  * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
5  * Copyright (C) 2014 Endless Mobile
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of the
10  * License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <drm/drmP.h>
24 #include "meson_drv.h"
25 #include "meson_vpp.h"
26 #include "meson_registers.h"
27 
28 /*
29  * VPP Handles all the Post Processing after the Scanout from the VIU
30  * We handle the following post processings :
31  * - Postblend : Blends the OSD1 only
32  *	We exclude OSD2, VS1, VS1 and Preblend output
33  * - Vertical OSD Scaler for OSD1 only, we disable vertical scaler and
34  *	use it only for interlace scanout
35  * - Intermediate FIFO with default Amlogic values
36  *
37  * What is missing :
38  * - Preblend for video overlay pre-scaling
39  * - OSD2 support for cursor framebuffer
40  * - Video pre-scaling before postblend
41  * - Full Vertical/Horizontal OSD scaling to support TV overscan
42  * - HDR conversion
43  */
44 
45 void meson_vpp_setup_mux(struct meson_drm *priv, unsigned int mux)
46 {
47 	writel(mux, priv->io_base + _REG(VPU_VIU_VENC_MUX_CTRL));
48 }
49 
50 /*
51  * When the output is interlaced, the OSD must switch between
52  * each field using the INTERLACE_SEL_ODD (0) of VIU_OSD1_BLK0_CFG_W0
53  * at each vsync.
54  * But the vertical scaler can provide such funtionnality if
55  * is configured for 2:1 scaling with interlace options enabled.
56  */
57 void meson_vpp_setup_interlace_vscaler_osd1(struct meson_drm *priv,
58 					    struct drm_rect *input)
59 {
60 	writel_relaxed(BIT(3) /* Enable scaler */ |
61 		       BIT(2), /* Select OSD1 */
62 			priv->io_base + _REG(VPP_OSD_SC_CTRL0));
63 
64 	writel_relaxed(((drm_rect_width(input) - 1) << 16) |
65 		       (drm_rect_height(input) - 1),
66 			priv->io_base + _REG(VPP_OSD_SCI_WH_M1));
67 	/* 2:1 scaling */
68 	writel_relaxed(((input->x1) << 16) | (input->x2),
69 			priv->io_base + _REG(VPP_OSD_SCO_H_START_END));
70 	writel_relaxed(((input->y1 >> 1) << 16) | (input->y2 >> 1),
71 			priv->io_base + _REG(VPP_OSD_SCO_V_START_END));
72 
73 	/* 2:1 scaling values */
74 	writel_relaxed(BIT(16), priv->io_base + _REG(VPP_OSD_VSC_INI_PHASE));
75 	writel_relaxed(BIT(25), priv->io_base + _REG(VPP_OSD_VSC_PHASE_STEP));
76 
77 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
78 
79 	writel_relaxed((4 << 0) /* osd_vsc_bank_length */ |
80 		       (4 << 3) /* osd_vsc_top_ini_rcv_num0 */ |
81 		       (1 << 8) /* osd_vsc_top_rpt_p0_num0 */ |
82 		       (6 << 11) /* osd_vsc_bot_ini_rcv_num0 */ |
83 		       (2 << 16) /* osd_vsc_bot_rpt_p0_num0 */ |
84 		       BIT(23)	/* osd_prog_interlace */ |
85 		       BIT(24), /* Enable vertical scaler */
86 			priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
87 }
88 
89 void meson_vpp_disable_interlace_vscaler_osd1(struct meson_drm *priv)
90 {
91 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
92 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
93 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
94 }
95 
96 static unsigned int vpp_filter_coefs_4point_bspline[] = {
97 	0x15561500, 0x14561600, 0x13561700, 0x12561800,
98 	0x11551a00, 0x11541b00, 0x10541c00, 0x0f541d00,
99 	0x0f531e00, 0x0e531f00, 0x0d522100, 0x0c522200,
100 	0x0b522300, 0x0b512400, 0x0a502600, 0x0a4f2700,
101 	0x094e2900, 0x084e2a00, 0x084d2b00, 0x074c2c01,
102 	0x074b2d01, 0x064a2f01, 0x06493001, 0x05483201,
103 	0x05473301, 0x05463401, 0x04453601, 0x04433702,
104 	0x04423802, 0x03413a02, 0x03403b02, 0x033f3c02,
105 	0x033d3d03
106 };
107 
108 static void meson_vpp_write_scaling_filter_coefs(struct meson_drm *priv,
109 						 const unsigned int *coefs,
110 						 bool is_horizontal)
111 {
112 	int i;
113 
114 	writel_relaxed(is_horizontal ? BIT(8) : 0,
115 			priv->io_base + _REG(VPP_OSD_SCALE_COEF_IDX));
116 	for (i = 0; i < 33; i++)
117 		writel_relaxed(coefs[i],
118 				priv->io_base + _REG(VPP_OSD_SCALE_COEF));
119 }
120 
121 void meson_vpp_init(struct meson_drm *priv)
122 {
123 	/* set dummy data default YUV black */
124 	if (meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
125 		writel_relaxed(0x108080, priv->io_base + _REG(VPP_DUMMY_DATA1));
126 	else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) {
127 		writel_bits_relaxed(0xff << 16, 0xff << 16,
128 				    priv->io_base + _REG(VIU_MISC_CTRL1));
129 		writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL));
130 		writel_relaxed(0x1020080,
131 				priv->io_base + _REG(VPP_DUMMY_DATA1));
132 	}
133 
134 	/* Initialize vpu fifo control registers */
135 	writel_relaxed(readl_relaxed(priv->io_base + _REG(VPP_OFIFO_SIZE)) |
136 			0x77f, priv->io_base + _REG(VPP_OFIFO_SIZE));
137 	writel_relaxed(0x08080808, priv->io_base + _REG(VPP_HOLD_LINES));
138 
139 	/* Turn off preblend */
140 	writel_bits_relaxed(VPP_PREBLEND_ENABLE, 0,
141 			    priv->io_base + _REG(VPP_MISC));
142 
143 	/* Turn off POSTBLEND */
144 	writel_bits_relaxed(VPP_POSTBLEND_ENABLE, 0,
145 			    priv->io_base + _REG(VPP_MISC));
146 
147 	/* Force all planes off */
148 	writel_bits_relaxed(VPP_OSD1_POSTBLEND | VPP_OSD2_POSTBLEND |
149 			    VPP_VD1_POSTBLEND | VPP_VD2_POSTBLEND, 0,
150 			    priv->io_base + _REG(VPP_MISC));
151 
152 	/* Disable Scalers */
153 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
154 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
155 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
156 
157 	/* Write in the proper filter coefficients. */
158 	meson_vpp_write_scaling_filter_coefs(priv,
159 				vpp_filter_coefs_4point_bspline, false);
160 	meson_vpp_write_scaling_filter_coefs(priv,
161 				vpp_filter_coefs_4point_bspline, true);
162 }
163