xref: /openbmc/linux/drivers/gpu/drm/meson/meson_vpp.c (revision ba61bb17)
1 /*
2  * Copyright (C) 2016 BayLibre, SAS
3  * Author: Neil Armstrong <narmstrong@baylibre.com>
4  * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
5  * Copyright (C) 2014 Endless Mobile
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of the
10  * License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <drm/drmP.h>
24 #include "meson_drv.h"
25 #include "meson_vpp.h"
26 #include "meson_registers.h"
27 
28 /**
29  * DOC: Video Post Processing
30  *
31  * VPP Handles all the Post Processing after the Scanout from the VIU
32  * We handle the following post processings :
33  *
34  * - Postblend, Blends the OSD1 only
35  *	We exclude OSD2, VS1, VS1 and Preblend output
36  * - Vertical OSD Scaler for OSD1 only, we disable vertical scaler and
37  *	use it only for interlace scanout
38  * - Intermediate FIFO with default Amlogic values
39  *
40  * What is missing :
41  *
42  * - Preblend for video overlay pre-scaling
43  * - OSD2 support for cursor framebuffer
44  * - Video pre-scaling before postblend
45  * - Full Vertical/Horizontal OSD scaling to support TV overscan
46  * - HDR conversion
47  */
48 
49 void meson_vpp_setup_mux(struct meson_drm *priv, unsigned int mux)
50 {
51 	writel(mux, priv->io_base + _REG(VPU_VIU_VENC_MUX_CTRL));
52 }
53 
54 /*
55  * When the output is interlaced, the OSD must switch between
56  * each field using the INTERLACE_SEL_ODD (0) of VIU_OSD1_BLK0_CFG_W0
57  * at each vsync.
58  * But the vertical scaler can provide such funtionnality if
59  * is configured for 2:1 scaling with interlace options enabled.
60  */
61 void meson_vpp_setup_interlace_vscaler_osd1(struct meson_drm *priv,
62 					    struct drm_rect *input)
63 {
64 	writel_relaxed(BIT(3) /* Enable scaler */ |
65 		       BIT(2), /* Select OSD1 */
66 			priv->io_base + _REG(VPP_OSD_SC_CTRL0));
67 
68 	writel_relaxed(((drm_rect_width(input) - 1) << 16) |
69 		       (drm_rect_height(input) - 1),
70 			priv->io_base + _REG(VPP_OSD_SCI_WH_M1));
71 	/* 2:1 scaling */
72 	writel_relaxed(((input->x1) << 16) | (input->x2),
73 			priv->io_base + _REG(VPP_OSD_SCO_H_START_END));
74 	writel_relaxed(((input->y1 >> 1) << 16) | (input->y2 >> 1),
75 			priv->io_base + _REG(VPP_OSD_SCO_V_START_END));
76 
77 	/* 2:1 scaling values */
78 	writel_relaxed(BIT(16), priv->io_base + _REG(VPP_OSD_VSC_INI_PHASE));
79 	writel_relaxed(BIT(25), priv->io_base + _REG(VPP_OSD_VSC_PHASE_STEP));
80 
81 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
82 
83 	writel_relaxed((4 << 0) /* osd_vsc_bank_length */ |
84 		       (4 << 3) /* osd_vsc_top_ini_rcv_num0 */ |
85 		       (1 << 8) /* osd_vsc_top_rpt_p0_num0 */ |
86 		       (6 << 11) /* osd_vsc_bot_ini_rcv_num0 */ |
87 		       (2 << 16) /* osd_vsc_bot_rpt_p0_num0 */ |
88 		       BIT(23)	/* osd_prog_interlace */ |
89 		       BIT(24), /* Enable vertical scaler */
90 			priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
91 }
92 
93 void meson_vpp_disable_interlace_vscaler_osd1(struct meson_drm *priv)
94 {
95 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
96 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
97 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
98 }
99 
100 static unsigned int vpp_filter_coefs_4point_bspline[] = {
101 	0x15561500, 0x14561600, 0x13561700, 0x12561800,
102 	0x11551a00, 0x11541b00, 0x10541c00, 0x0f541d00,
103 	0x0f531e00, 0x0e531f00, 0x0d522100, 0x0c522200,
104 	0x0b522300, 0x0b512400, 0x0a502600, 0x0a4f2700,
105 	0x094e2900, 0x084e2a00, 0x084d2b00, 0x074c2c01,
106 	0x074b2d01, 0x064a2f01, 0x06493001, 0x05483201,
107 	0x05473301, 0x05463401, 0x04453601, 0x04433702,
108 	0x04423802, 0x03413a02, 0x03403b02, 0x033f3c02,
109 	0x033d3d03
110 };
111 
112 static void meson_vpp_write_scaling_filter_coefs(struct meson_drm *priv,
113 						 const unsigned int *coefs,
114 						 bool is_horizontal)
115 {
116 	int i;
117 
118 	writel_relaxed(is_horizontal ? BIT(8) : 0,
119 			priv->io_base + _REG(VPP_OSD_SCALE_COEF_IDX));
120 	for (i = 0; i < 33; i++)
121 		writel_relaxed(coefs[i],
122 				priv->io_base + _REG(VPP_OSD_SCALE_COEF));
123 }
124 
125 void meson_vpp_init(struct meson_drm *priv)
126 {
127 	/* set dummy data default YUV black */
128 	if (meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
129 		writel_relaxed(0x108080, priv->io_base + _REG(VPP_DUMMY_DATA1));
130 	else if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu")) {
131 		writel_bits_relaxed(0xff << 16, 0xff << 16,
132 				    priv->io_base + _REG(VIU_MISC_CTRL1));
133 		writel_relaxed(0x20000, priv->io_base + _REG(VPP_DOLBY_CTRL));
134 		writel_relaxed(0x1020080,
135 				priv->io_base + _REG(VPP_DUMMY_DATA1));
136 	}
137 
138 	/* Initialize vpu fifo control registers */
139 	writel_relaxed(readl_relaxed(priv->io_base + _REG(VPP_OFIFO_SIZE)) |
140 			0x77f, priv->io_base + _REG(VPP_OFIFO_SIZE));
141 	writel_relaxed(0x08080808, priv->io_base + _REG(VPP_HOLD_LINES));
142 
143 	/* Turn off preblend */
144 	writel_bits_relaxed(VPP_PREBLEND_ENABLE, 0,
145 			    priv->io_base + _REG(VPP_MISC));
146 
147 	/* Turn off POSTBLEND */
148 	writel_bits_relaxed(VPP_POSTBLEND_ENABLE, 0,
149 			    priv->io_base + _REG(VPP_MISC));
150 
151 	/* Force all planes off */
152 	writel_bits_relaxed(VPP_OSD1_POSTBLEND | VPP_OSD2_POSTBLEND |
153 			    VPP_VD1_POSTBLEND | VPP_VD2_POSTBLEND, 0,
154 			    priv->io_base + _REG(VPP_MISC));
155 
156 	/* Disable Scalers */
157 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_SC_CTRL0));
158 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_VSC_CTRL0));
159 	writel_relaxed(0, priv->io_base + _REG(VPP_OSD_HSC_CTRL0));
160 
161 	/* Write in the proper filter coefficients. */
162 	meson_vpp_write_scaling_filter_coefs(priv,
163 				vpp_filter_coefs_4point_bspline, false);
164 	meson_vpp_write_scaling_filter_coefs(priv,
165 				vpp_filter_coefs_4point_bspline, true);
166 }
167