xref: /openbmc/linux/drivers/gpu/drm/kmb/kmb_plane.c (revision cef69974)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright © 2018-2020 Intel Corporation
4  */
5 
6 #include <drm/drm_atomic.h>
7 #include <drm/drm_atomic_helper.h>
8 #include <drm/drm_crtc.h>
9 #include <drm/drm_crtc_helper.h>
10 #include <drm/drm_fb_cma_helper.h>
11 #include <drm/drm_fb_helper.h>
12 #include <drm/drm_fourcc.h>
13 #include <drm/drm_gem_cma_helper.h>
14 #include <drm/drm_managed.h>
15 #include <drm/drm_plane_helper.h>
16 
17 #include "kmb_drv.h"
18 #include "kmb_plane.h"
19 #include "kmb_regs.h"
20 
21 const u32 layer_irqs[] = {
22 	LCD_INT_VL0,
23 	LCD_INT_VL1,
24 	LCD_INT_GL0,
25 	LCD_INT_GL1
26 };
27 
28 /* Conversion (yuv->rgb) matrix from myriadx */
29 static const u32 csc_coef_lcd[] = {
30 	1024, 0, 1436,
31 	1024, -352, -731,
32 	1024, 1814, 0,
33 	-179, 125, -226
34 };
35 
36 /* Graphics layer (layers 2 & 3) formats, only packed formats  are supported */
37 static const u32 kmb_formats_g[] = {
38 	DRM_FORMAT_RGB332,
39 	DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444,
40 	DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444,
41 	DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555,
42 	DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555,
43 	DRM_FORMAT_RGB565, DRM_FORMAT_BGR565,
44 	DRM_FORMAT_RGB888, DRM_FORMAT_BGR888,
45 	DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
46 	DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888,
47 };
48 
49 /* Video layer ( 0 & 1) formats, packed and planar formats are supported */
50 static const u32 kmb_formats_v[] = {
51 	/* packed formats */
52 	DRM_FORMAT_RGB332,
53 	DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444,
54 	DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444,
55 	DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555,
56 	DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555,
57 	DRM_FORMAT_RGB565, DRM_FORMAT_BGR565,
58 	DRM_FORMAT_RGB888, DRM_FORMAT_BGR888,
59 	DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
60 	DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888,
61 	/*planar formats */
62 	DRM_FORMAT_YUV420, DRM_FORMAT_YVU420,
63 	DRM_FORMAT_YUV422, DRM_FORMAT_YVU422,
64 	DRM_FORMAT_YUV444, DRM_FORMAT_YVU444,
65 	DRM_FORMAT_NV12, DRM_FORMAT_NV21,
66 };
67 
68 static unsigned int check_pixel_format(struct drm_plane *plane, u32 format)
69 {
70 	struct kmb_drm_private *kmb;
71 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
72 	int i;
73 	int plane_id = kmb_plane->id;
74 	struct disp_cfg init_disp_cfg;
75 
76 	kmb = to_kmb(plane->dev);
77 	init_disp_cfg = kmb->init_disp_cfg[plane_id];
78 	/* Due to HW limitations, changing pixel format after initial
79 	 * plane configuration is not supported.
80 	 */
81 	if (init_disp_cfg.format && init_disp_cfg.format != format) {
82 		drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration");
83 		return -EINVAL;
84 	}
85 	for (i = 0; i < plane->format_count; i++) {
86 		if (plane->format_types[i] == format)
87 			return 0;
88 	}
89 	return -EINVAL;
90 }
91 
92 static int kmb_plane_atomic_check(struct drm_plane *plane,
93 				  struct drm_atomic_state *state)
94 {
95 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
96 										 plane);
97 	struct kmb_drm_private *kmb;
98 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
99 	int plane_id = kmb_plane->id;
100 	struct disp_cfg init_disp_cfg;
101 	struct drm_framebuffer *fb;
102 	int ret;
103 	struct drm_crtc_state *crtc_state;
104 	bool can_position;
105 
106 	kmb = to_kmb(plane->dev);
107 	init_disp_cfg = kmb->init_disp_cfg[plane_id];
108 	fb = new_plane_state->fb;
109 	if (!fb || !new_plane_state->crtc)
110 		return 0;
111 
112 	ret = check_pixel_format(plane, fb->format->format);
113 	if (ret)
114 		return ret;
115 
116 	if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH ||
117 	    new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT ||
118 	    new_plane_state->crtc_w < KMB_FB_MIN_WIDTH ||
119 	    new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT)
120 		return -EINVAL;
121 
122 	/* Due to HW limitations, changing plane height or width after
123 	 * initial plane configuration is not supported.
124 	 */
125 	if ((init_disp_cfg.width && init_disp_cfg.height) &&
126 	    (init_disp_cfg.width != fb->width ||
127 	    init_disp_cfg.height != fb->height)) {
128 		drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration");
129 		return -EINVAL;
130 	}
131 	can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
132 	crtc_state =
133 		drm_atomic_get_existing_crtc_state(state,
134 						   new_plane_state->crtc);
135 	return drm_atomic_helper_check_plane_state(new_plane_state,
136 						   crtc_state,
137 						   DRM_PLANE_HELPER_NO_SCALING,
138 						   DRM_PLANE_HELPER_NO_SCALING,
139 						   can_position, true);
140 }
141 
142 static void kmb_plane_atomic_disable(struct drm_plane *plane,
143 				     struct drm_atomic_state *state)
144 {
145 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
146 	int plane_id = kmb_plane->id;
147 	struct kmb_drm_private *kmb;
148 
149 	kmb = to_kmb(plane->dev);
150 
151 	if (WARN_ON(plane_id >= KMB_MAX_PLANES))
152 		return;
153 
154 	switch (plane_id) {
155 	case LAYER_0:
156 		kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL1_ENABLE;
157 		break;
158 	case LAYER_1:
159 		kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL2_ENABLE;
160 		break;
161 	}
162 
163 	kmb->plane_status[plane_id].disable = true;
164 }
165 
166 static unsigned int get_pixel_format(u32 format)
167 {
168 	unsigned int val = 0;
169 
170 	switch (format) {
171 		/* planar formats */
172 	case DRM_FORMAT_YUV444:
173 		val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE;
174 		break;
175 	case DRM_FORMAT_YVU444:
176 		val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE
177 		    | LCD_LAYER_CRCB_ORDER;
178 		break;
179 	case DRM_FORMAT_YUV422:
180 		val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE;
181 		break;
182 	case DRM_FORMAT_YVU422:
183 		val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE
184 		    | LCD_LAYER_CRCB_ORDER;
185 		break;
186 	case DRM_FORMAT_YUV420:
187 		val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE;
188 		break;
189 	case DRM_FORMAT_YVU420:
190 		val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE
191 		    | LCD_LAYER_CRCB_ORDER;
192 		break;
193 	case DRM_FORMAT_NV12:
194 		val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE;
195 		break;
196 	case DRM_FORMAT_NV21:
197 		val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE
198 		    | LCD_LAYER_CRCB_ORDER;
199 		break;
200 		/* packed formats */
201 		/* looks hw requires B & G to be swapped when RGB */
202 	case DRM_FORMAT_RGB332:
203 		val = LCD_LAYER_FORMAT_RGB332 | LCD_LAYER_BGR_ORDER;
204 		break;
205 	case DRM_FORMAT_XBGR4444:
206 		val = LCD_LAYER_FORMAT_RGBX4444;
207 		break;
208 	case DRM_FORMAT_ARGB4444:
209 		val = LCD_LAYER_FORMAT_RGBA4444 | LCD_LAYER_BGR_ORDER;
210 		break;
211 	case DRM_FORMAT_ABGR4444:
212 		val = LCD_LAYER_FORMAT_RGBA4444;
213 		break;
214 	case DRM_FORMAT_XRGB1555:
215 		val = LCD_LAYER_FORMAT_XRGB1555 | LCD_LAYER_BGR_ORDER;
216 		break;
217 	case DRM_FORMAT_XBGR1555:
218 		val = LCD_LAYER_FORMAT_XRGB1555;
219 		break;
220 	case DRM_FORMAT_ARGB1555:
221 		val = LCD_LAYER_FORMAT_RGBA1555 | LCD_LAYER_BGR_ORDER;
222 		break;
223 	case DRM_FORMAT_ABGR1555:
224 		val = LCD_LAYER_FORMAT_RGBA1555;
225 		break;
226 	case DRM_FORMAT_RGB565:
227 		val = LCD_LAYER_FORMAT_RGB565 | LCD_LAYER_BGR_ORDER;
228 		break;
229 	case DRM_FORMAT_BGR565:
230 		val = LCD_LAYER_FORMAT_RGB565;
231 		break;
232 	case DRM_FORMAT_RGB888:
233 		val = LCD_LAYER_FORMAT_RGB888 | LCD_LAYER_BGR_ORDER;
234 		break;
235 	case DRM_FORMAT_BGR888:
236 		val = LCD_LAYER_FORMAT_RGB888;
237 		break;
238 	case DRM_FORMAT_XRGB8888:
239 		val = LCD_LAYER_FORMAT_RGBX8888 | LCD_LAYER_BGR_ORDER;
240 		break;
241 	case DRM_FORMAT_XBGR8888:
242 		val = LCD_LAYER_FORMAT_RGBX8888;
243 		break;
244 	case DRM_FORMAT_ARGB8888:
245 		val = LCD_LAYER_FORMAT_RGBA8888 | LCD_LAYER_BGR_ORDER;
246 		break;
247 	case DRM_FORMAT_ABGR8888:
248 		val = LCD_LAYER_FORMAT_RGBA8888;
249 		break;
250 	}
251 	DRM_INFO_ONCE("%s : %d format=0x%x val=0x%x\n",
252 		      __func__, __LINE__, format, val);
253 	return val;
254 }
255 
256 static unsigned int get_bits_per_pixel(const struct drm_format_info *format)
257 {
258 	u32 bpp = 0;
259 	unsigned int val = 0;
260 
261 	if (format->num_planes > 1) {
262 		val = LCD_LAYER_8BPP;
263 		return val;
264 	}
265 
266 	bpp += 8 * format->cpp[0];
267 
268 	switch (bpp) {
269 	case 8:
270 		val = LCD_LAYER_8BPP;
271 		break;
272 	case 16:
273 		val = LCD_LAYER_16BPP;
274 		break;
275 	case 24:
276 		val = LCD_LAYER_24BPP;
277 		break;
278 	case 32:
279 		val = LCD_LAYER_32BPP;
280 		break;
281 	}
282 
283 	DRM_DEBUG("bpp=%d val=0x%x\n", bpp, val);
284 	return val;
285 }
286 
287 static void config_csc(struct kmb_drm_private *kmb, int plane_id)
288 {
289 	/* YUV to RGB conversion using the fixed matrix csc_coef_lcd */
290 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF11(plane_id), csc_coef_lcd[0]);
291 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF12(plane_id), csc_coef_lcd[1]);
292 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF13(plane_id), csc_coef_lcd[2]);
293 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF21(plane_id), csc_coef_lcd[3]);
294 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF22(plane_id), csc_coef_lcd[4]);
295 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF23(plane_id), csc_coef_lcd[5]);
296 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF31(plane_id), csc_coef_lcd[6]);
297 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF32(plane_id), csc_coef_lcd[7]);
298 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF33(plane_id), csc_coef_lcd[8]);
299 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF1(plane_id), csc_coef_lcd[9]);
300 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF2(plane_id), csc_coef_lcd[10]);
301 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]);
302 }
303 
304 static void kmb_plane_set_alpha(struct kmb_drm_private *kmb,
305 				const struct drm_plane_state *state,
306 				unsigned char plane_id,
307 				unsigned int *val)
308 {
309 	u16 plane_alpha = state->alpha;
310 	u16 pixel_blend_mode = state->pixel_blend_mode;
311 	int has_alpha = state->fb->format->has_alpha;
312 
313 	if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE)
314 		*val |= LCD_LAYER_ALPHA_STATIC;
315 
316 	if (has_alpha) {
317 		switch (pixel_blend_mode) {
318 		case DRM_MODE_BLEND_PIXEL_NONE:
319 			break;
320 		case DRM_MODE_BLEND_PREMULTI:
321 			*val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT;
322 			break;
323 		case DRM_MODE_BLEND_COVERAGE:
324 			*val |= LCD_LAYER_ALPHA_EMBED;
325 			break;
326 		default:
327 			DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n",
328 				  __stringify(pixel_blend_mode),
329 				  (long)pixel_blend_mode);
330 			break;
331 		}
332 	}
333 
334 	if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) {
335 		*val &= LCD_LAYER_ALPHA_DISABLED;
336 		return;
337 	}
338 
339 	kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha);
340 }
341 
342 static void kmb_plane_atomic_update(struct drm_plane *plane,
343 				    struct drm_atomic_state *state)
344 {
345 	struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state,
346 										 plane);
347 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
348 										 plane);
349 	struct drm_framebuffer *fb;
350 	struct kmb_drm_private *kmb;
351 	unsigned int width;
352 	unsigned int height;
353 	unsigned int dma_len;
354 	struct kmb_plane *kmb_plane;
355 	unsigned int dma_cfg;
356 	unsigned int ctrl = 0, val = 0, out_format = 0;
357 	unsigned int src_w, src_h, crtc_x, crtc_y;
358 	unsigned char plane_id;
359 	int num_planes;
360 	static dma_addr_t addr[MAX_SUB_PLANES];
361 	struct disp_cfg *init_disp_cfg;
362 
363 	if (!plane || !new_plane_state || !old_plane_state)
364 		return;
365 
366 	fb = new_plane_state->fb;
367 	if (!fb)
368 		return;
369 
370 	num_planes = fb->format->num_planes;
371 	kmb_plane = to_kmb_plane(plane);
372 
373 	kmb = to_kmb(plane->dev);
374 	plane_id = kmb_plane->id;
375 
376 	spin_lock_irq(&kmb->irq_lock);
377 	if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
378 		spin_unlock_irq(&kmb->irq_lock);
379 		drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning");
380 		return;
381 	}
382 	spin_unlock_irq(&kmb->irq_lock);
383 
384 	init_disp_cfg = &kmb->init_disp_cfg[plane_id];
385 	src_w = new_plane_state->src_w >> 16;
386 	src_h = new_plane_state->src_h >> 16;
387 	crtc_x = new_plane_state->crtc_x;
388 	crtc_y = new_plane_state->crtc_y;
389 
390 	drm_dbg(&kmb->drm,
391 		"src_w=%d src_h=%d, fb->format->format=0x%x fb->flags=0x%x\n",
392 		  src_w, src_h, fb->format->format, fb->flags);
393 
394 	width = fb->width;
395 	height = fb->height;
396 	dma_len = (width * height * fb->format->cpp[0]);
397 	drm_dbg(&kmb->drm, "dma_len=%d ", dma_len);
398 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN(plane_id), dma_len);
399 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN_SHADOW(plane_id), dma_len);
400 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_VSTRIDE(plane_id),
401 		      fb->pitches[0]);
402 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_WIDTH(plane_id),
403 		      (width * fb->format->cpp[0]));
404 
405 	addr[Y_PLANE] = drm_fb_cma_get_gem_addr(fb, new_plane_state, 0);
406 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_START_ADDR(plane_id),
407 		      addr[Y_PLANE] + fb->offsets[0]);
408 	val = get_pixel_format(fb->format->format);
409 	val |= get_bits_per_pixel(fb->format);
410 	/* Program Cb/Cr for planar formats */
411 	if (num_planes > 1) {
412 		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id),
413 			      width * fb->format->cpp[0]);
414 		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_WIDTH(plane_id),
415 			      (width * fb->format->cpp[0]));
416 
417 		addr[U_PLANE] = drm_fb_cma_get_gem_addr(fb, new_plane_state,
418 							U_PLANE);
419 		/* check if Cb/Cr is swapped*/
420 		if (num_planes == 3 && (val & LCD_LAYER_CRCB_ORDER))
421 			kmb_write_lcd(kmb,
422 				      LCD_LAYERn_DMA_START_CR_ADR(plane_id),
423 					addr[U_PLANE]);
424 		else
425 			kmb_write_lcd(kmb,
426 				      LCD_LAYERn_DMA_START_CB_ADR(plane_id),
427 					addr[U_PLANE]);
428 
429 		if (num_planes == 3) {
430 			kmb_write_lcd(kmb,
431 				      LCD_LAYERn_DMA_CR_LINE_VSTRIDE(plane_id),
432 				      ((width) * fb->format->cpp[0]));
433 
434 			kmb_write_lcd(kmb,
435 				      LCD_LAYERn_DMA_CR_LINE_WIDTH(plane_id),
436 				      ((width) * fb->format->cpp[0]));
437 
438 			addr[V_PLANE] = drm_fb_cma_get_gem_addr(fb,
439 								new_plane_state,
440 								V_PLANE);
441 
442 			/* check if Cb/Cr is swapped*/
443 			if (val & LCD_LAYER_CRCB_ORDER)
444 				kmb_write_lcd(kmb,
445 					      LCD_LAYERn_DMA_START_CB_ADR(plane_id),
446 					      addr[V_PLANE]);
447 			else
448 				kmb_write_lcd(kmb,
449 					      LCD_LAYERn_DMA_START_CR_ADR(plane_id),
450 					      addr[V_PLANE]);
451 		}
452 	}
453 
454 	kmb_write_lcd(kmb, LCD_LAYERn_WIDTH(plane_id), src_w - 1);
455 	kmb_write_lcd(kmb, LCD_LAYERn_HEIGHT(plane_id), src_h - 1);
456 	kmb_write_lcd(kmb, LCD_LAYERn_COL_START(plane_id), crtc_x);
457 	kmb_write_lcd(kmb, LCD_LAYERn_ROW_START(plane_id), crtc_y);
458 
459 	val |= LCD_LAYER_FIFO_100;
460 
461 	if (val & LCD_LAYER_PLANAR_STORAGE) {
462 		val |= LCD_LAYER_CSC_EN;
463 
464 		/* Enable CSC if input is planar and output is RGB */
465 		config_csc(kmb, plane_id);
466 	}
467 
468 	kmb_plane_set_alpha(kmb, plane->state, plane_id, &val);
469 
470 	kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val);
471 
472 	/* Configure LCD_CONTROL */
473 	ctrl = kmb_read_lcd(kmb, LCD_CONTROL);
474 
475 	/* Set layer blending config */
476 	ctrl &= ~LCD_CTRL_ALPHA_ALL;
477 	ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 |
478 		LCD_CTRL_ALPHA_BLEND_VL2;
479 
480 	ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE;
481 
482 	switch (plane_id) {
483 	case LAYER_0:
484 		ctrl |= LCD_CTRL_VL1_ENABLE;
485 		break;
486 	case LAYER_1:
487 		ctrl |= LCD_CTRL_VL2_ENABLE;
488 		break;
489 	case LAYER_2:
490 		ctrl |= LCD_CTRL_GL1_ENABLE;
491 		break;
492 	case LAYER_3:
493 		ctrl |= LCD_CTRL_GL2_ENABLE;
494 		break;
495 	}
496 
497 	ctrl |= LCD_CTRL_PROGRESSIVE | LCD_CTRL_TIM_GEN_ENABLE
498 	    | LCD_CTRL_CONTINUOUS | LCD_CTRL_OUTPUT_ENABLED;
499 
500 	/* LCD is connected to MIPI on kmb
501 	 * Therefore this bit is required for DSI Tx
502 	 */
503 	ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL;
504 
505 	kmb_write_lcd(kmb, LCD_CONTROL, ctrl);
506 
507 	/* Enable pipeline AXI read transactions for the DMA
508 	 * after setting graphics layers. This must be done
509 	 * in a separate write cycle.
510 	 */
511 	kmb_set_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
512 
513 	/* FIXME no doc on how to set output format, these values are taken
514 	 * from the Myriadx tests
515 	 */
516 	out_format |= LCD_OUTF_FORMAT_RGB888;
517 
518 	/* Leave RGB order,conversion mode and clip mode to default */
519 	/* do not interleave RGB channels for mipi Tx compatibility */
520 	out_format |= LCD_OUTF_MIPI_RGB_MODE;
521 	kmb_write_lcd(kmb, LCD_OUT_FORMAT_CFG, out_format);
522 
523 	dma_cfg = LCD_DMA_LAYER_ENABLE | LCD_DMA_LAYER_VSTRIDE_EN |
524 	    LCD_DMA_LAYER_CONT_UPDATE | LCD_DMA_LAYER_AXI_BURST_16;
525 
526 	/* Enable DMA */
527 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg);
528 
529 	/* Save initial display config */
530 	if (!init_disp_cfg->width ||
531 	    !init_disp_cfg->height ||
532 	    !init_disp_cfg->format) {
533 		init_disp_cfg->width = width;
534 		init_disp_cfg->height = height;
535 		init_disp_cfg->format = fb->format->format;
536 	}
537 
538 	drm_dbg(&kmb->drm, "dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg,
539 		kmb_read_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id)));
540 
541 	kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, LCD_INT_EOF |
542 			LCD_INT_DMA_ERR);
543 	kmb_set_bitmask_lcd(kmb, LCD_INT_ENABLE, LCD_INT_EOF |
544 			LCD_INT_DMA_ERR);
545 }
546 
547 static const struct drm_plane_helper_funcs kmb_plane_helper_funcs = {
548 	.atomic_check = kmb_plane_atomic_check,
549 	.atomic_update = kmb_plane_atomic_update,
550 	.atomic_disable = kmb_plane_atomic_disable
551 };
552 
553 void kmb_plane_destroy(struct drm_plane *plane)
554 {
555 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
556 
557 	drm_plane_cleanup(plane);
558 	kfree(kmb_plane);
559 }
560 
561 static const struct drm_plane_funcs kmb_plane_funcs = {
562 	.update_plane = drm_atomic_helper_update_plane,
563 	.disable_plane = drm_atomic_helper_disable_plane,
564 	.destroy = kmb_plane_destroy,
565 	.reset = drm_atomic_helper_plane_reset,
566 	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
567 	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
568 };
569 
570 struct kmb_plane *kmb_plane_init(struct drm_device *drm)
571 {
572 	struct kmb_drm_private *kmb = to_kmb(drm);
573 	struct kmb_plane *plane = NULL;
574 	struct kmb_plane *primary = NULL;
575 	int i = 0;
576 	int ret = 0;
577 	enum drm_plane_type plane_type;
578 	const u32 *plane_formats;
579 	int num_plane_formats;
580 	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
581 				  BIT(DRM_MODE_BLEND_PREMULTI)   |
582 				  BIT(DRM_MODE_BLEND_COVERAGE);
583 
584 	for (i = 0; i < KMB_MAX_PLANES; i++) {
585 		plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL);
586 
587 		if (!plane) {
588 			drm_err(drm, "Failed to allocate plane\n");
589 			return ERR_PTR(-ENOMEM);
590 		}
591 
592 		plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY :
593 		    DRM_PLANE_TYPE_OVERLAY;
594 		if (i < 2) {
595 			plane_formats = kmb_formats_v;
596 			num_plane_formats = ARRAY_SIZE(kmb_formats_v);
597 		} else {
598 			plane_formats = kmb_formats_g;
599 			num_plane_formats = ARRAY_SIZE(kmb_formats_g);
600 		}
601 
602 		ret = drm_universal_plane_init(drm, &plane->base_plane,
603 					       POSSIBLE_CRTCS, &kmb_plane_funcs,
604 					       plane_formats, num_plane_formats,
605 					       NULL, plane_type, "plane %d", i);
606 		if (ret < 0) {
607 			drm_err(drm, "drm_universal_plane_init failed (ret=%d)",
608 				ret);
609 			goto cleanup;
610 		}
611 		drm_dbg(drm, "%s : %d i=%d type=%d",
612 			__func__, __LINE__,
613 			  i, plane_type);
614 		drm_plane_create_alpha_property(&plane->base_plane);
615 
616 		drm_plane_create_blend_mode_property(&plane->base_plane,
617 						     blend_caps);
618 
619 		drm_plane_create_zpos_immutable_property(&plane->base_plane, i);
620 
621 		drm_plane_helper_add(&plane->base_plane,
622 				     &kmb_plane_helper_funcs);
623 
624 		if (plane_type == DRM_PLANE_TYPE_PRIMARY) {
625 			primary = plane;
626 			kmb->plane = plane;
627 		}
628 		drm_dbg(drm, "%s : %d primary=%p\n", __func__, __LINE__,
629 			&primary->base_plane);
630 		plane->id = i;
631 	}
632 
633 	/* Disable pipeline AXI read transactions for the DMA
634 	 * prior to setting graphics layers
635 	 */
636 	kmb_clr_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
637 
638 	return primary;
639 cleanup:
640 	drmm_kfree(drm, plane);
641 	return ERR_PTR(ret);
642 }
643