xref: /openbmc/linux/drivers/gpu/drm/kmb/kmb_plane.c (revision c0605cd6)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright © 2018-2020 Intel Corporation
4  */
5 
6 #include <drm/drm_atomic.h>
7 #include <drm/drm_atomic_helper.h>
8 #include <drm/drm_blend.h>
9 #include <drm/drm_crtc.h>
10 #include <drm/drm_crtc_helper.h>
11 #include <drm/drm_fb_dma_helper.h>
12 #include <drm/drm_fb_helper.h>
13 #include <drm/drm_fourcc.h>
14 #include <drm/drm_framebuffer.h>
15 #include <drm/drm_gem_dma_helper.h>
16 #include <drm/drm_managed.h>
17 
18 #include "kmb_drv.h"
19 #include "kmb_plane.h"
20 #include "kmb_regs.h"
21 
22 const u32 layer_irqs[] = {
23 	LCD_INT_VL0,
24 	LCD_INT_VL1,
25 	LCD_INT_GL0,
26 	LCD_INT_GL1
27 };
28 
29 /* Conversion (yuv->rgb) matrix from myriadx */
30 static const u32 csc_coef_lcd[] = {
31 	1024, 0, 1436,
32 	1024, -352, -731,
33 	1024, 1814, 0,
34 	-179, 125, -226
35 };
36 
37 /* Graphics layer (layers 2 & 3) formats, only packed formats  are supported */
38 static const u32 kmb_formats_g[] = {
39 	DRM_FORMAT_RGB332,
40 	DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444,
41 	DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444,
42 	DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555,
43 	DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555,
44 	DRM_FORMAT_RGB565, DRM_FORMAT_BGR565,
45 	DRM_FORMAT_RGB888, DRM_FORMAT_BGR888,
46 	DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
47 	DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888,
48 };
49 
50 /* Video layer ( 0 & 1) formats, packed and planar formats are supported */
51 static const u32 kmb_formats_v[] = {
52 	/* packed formats */
53 	DRM_FORMAT_RGB332,
54 	DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444,
55 	DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444,
56 	DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555,
57 	DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555,
58 	DRM_FORMAT_RGB565, DRM_FORMAT_BGR565,
59 	DRM_FORMAT_RGB888, DRM_FORMAT_BGR888,
60 	DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
61 	DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888,
62 	/*planar formats */
63 	DRM_FORMAT_YUV420, DRM_FORMAT_YVU420,
64 	DRM_FORMAT_YUV422, DRM_FORMAT_YVU422,
65 	DRM_FORMAT_YUV444, DRM_FORMAT_YVU444,
66 	DRM_FORMAT_NV12, DRM_FORMAT_NV21,
67 };
68 
69 static unsigned int check_pixel_format(struct drm_plane *plane, u32 format)
70 {
71 	struct kmb_drm_private *kmb;
72 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
73 	int i;
74 	int plane_id = kmb_plane->id;
75 	struct disp_cfg init_disp_cfg;
76 
77 	kmb = to_kmb(plane->dev);
78 	init_disp_cfg = kmb->init_disp_cfg[plane_id];
79 	/* Due to HW limitations, changing pixel format after initial
80 	 * plane configuration is not supported.
81 	 */
82 	if (init_disp_cfg.format && init_disp_cfg.format != format) {
83 		drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration");
84 		return -EINVAL;
85 	}
86 	for (i = 0; i < plane->format_count; i++) {
87 		if (plane->format_types[i] == format)
88 			return 0;
89 	}
90 	return -EINVAL;
91 }
92 
93 static int kmb_plane_atomic_check(struct drm_plane *plane,
94 				  struct drm_atomic_state *state)
95 {
96 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
97 										 plane);
98 	struct kmb_drm_private *kmb;
99 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
100 	int plane_id = kmb_plane->id;
101 	struct disp_cfg init_disp_cfg;
102 	struct drm_framebuffer *fb;
103 	int ret;
104 	struct drm_crtc_state *crtc_state;
105 	bool can_position;
106 
107 	kmb = to_kmb(plane->dev);
108 	init_disp_cfg = kmb->init_disp_cfg[plane_id];
109 	fb = new_plane_state->fb;
110 	if (!fb || !new_plane_state->crtc)
111 		return 0;
112 
113 	ret = check_pixel_format(plane, fb->format->format);
114 	if (ret)
115 		return ret;
116 
117 	if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH ||
118 	    new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT ||
119 	    new_plane_state->crtc_w < KMB_FB_MIN_WIDTH ||
120 	    new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT)
121 		return -EINVAL;
122 
123 	/* Due to HW limitations, changing plane height or width after
124 	 * initial plane configuration is not supported.
125 	 */
126 	if ((init_disp_cfg.width && init_disp_cfg.height) &&
127 	    (init_disp_cfg.width != fb->width ||
128 	    init_disp_cfg.height != fb->height)) {
129 		drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration");
130 		return -EINVAL;
131 	}
132 	can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
133 	crtc_state =
134 		drm_atomic_get_existing_crtc_state(state,
135 						   new_plane_state->crtc);
136 	return drm_atomic_helper_check_plane_state(new_plane_state,
137 						   crtc_state,
138 						   DRM_PLANE_NO_SCALING,
139 						   DRM_PLANE_NO_SCALING,
140 						   can_position, true);
141 }
142 
143 static void kmb_plane_atomic_disable(struct drm_plane *plane,
144 				     struct drm_atomic_state *state)
145 {
146 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
147 	int plane_id = kmb_plane->id;
148 	struct kmb_drm_private *kmb;
149 
150 	kmb = to_kmb(plane->dev);
151 
152 	if (WARN_ON(plane_id >= KMB_MAX_PLANES))
153 		return;
154 
155 	switch (plane_id) {
156 	case LAYER_0:
157 		kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL1_ENABLE;
158 		break;
159 	case LAYER_1:
160 		kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL2_ENABLE;
161 		break;
162 	}
163 
164 	kmb->plane_status[plane_id].disable = true;
165 }
166 
167 static unsigned int get_pixel_format(u32 format)
168 {
169 	unsigned int val = 0;
170 
171 	switch (format) {
172 		/* planar formats */
173 	case DRM_FORMAT_YUV444:
174 		val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE;
175 		break;
176 	case DRM_FORMAT_YVU444:
177 		val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE
178 		    | LCD_LAYER_CRCB_ORDER;
179 		break;
180 	case DRM_FORMAT_YUV422:
181 		val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE;
182 		break;
183 	case DRM_FORMAT_YVU422:
184 		val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE
185 		    | LCD_LAYER_CRCB_ORDER;
186 		break;
187 	case DRM_FORMAT_YUV420:
188 		val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE;
189 		break;
190 	case DRM_FORMAT_YVU420:
191 		val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE
192 		    | LCD_LAYER_CRCB_ORDER;
193 		break;
194 	case DRM_FORMAT_NV12:
195 		val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE;
196 		break;
197 	case DRM_FORMAT_NV21:
198 		val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE
199 		    | LCD_LAYER_CRCB_ORDER;
200 		break;
201 		/* packed formats */
202 		/* looks hw requires B & G to be swapped when RGB */
203 	case DRM_FORMAT_RGB332:
204 		val = LCD_LAYER_FORMAT_RGB332 | LCD_LAYER_BGR_ORDER;
205 		break;
206 	case DRM_FORMAT_XBGR4444:
207 		val = LCD_LAYER_FORMAT_RGBX4444;
208 		break;
209 	case DRM_FORMAT_ARGB4444:
210 		val = LCD_LAYER_FORMAT_RGBA4444 | LCD_LAYER_BGR_ORDER;
211 		break;
212 	case DRM_FORMAT_ABGR4444:
213 		val = LCD_LAYER_FORMAT_RGBA4444;
214 		break;
215 	case DRM_FORMAT_XRGB1555:
216 		val = LCD_LAYER_FORMAT_XRGB1555 | LCD_LAYER_BGR_ORDER;
217 		break;
218 	case DRM_FORMAT_XBGR1555:
219 		val = LCD_LAYER_FORMAT_XRGB1555;
220 		break;
221 	case DRM_FORMAT_ARGB1555:
222 		val = LCD_LAYER_FORMAT_RGBA1555 | LCD_LAYER_BGR_ORDER;
223 		break;
224 	case DRM_FORMAT_ABGR1555:
225 		val = LCD_LAYER_FORMAT_RGBA1555;
226 		break;
227 	case DRM_FORMAT_RGB565:
228 		val = LCD_LAYER_FORMAT_RGB565 | LCD_LAYER_BGR_ORDER;
229 		break;
230 	case DRM_FORMAT_BGR565:
231 		val = LCD_LAYER_FORMAT_RGB565;
232 		break;
233 	case DRM_FORMAT_RGB888:
234 		val = LCD_LAYER_FORMAT_RGB888 | LCD_LAYER_BGR_ORDER;
235 		break;
236 	case DRM_FORMAT_BGR888:
237 		val = LCD_LAYER_FORMAT_RGB888;
238 		break;
239 	case DRM_FORMAT_XRGB8888:
240 		val = LCD_LAYER_FORMAT_RGBX8888 | LCD_LAYER_BGR_ORDER;
241 		break;
242 	case DRM_FORMAT_XBGR8888:
243 		val = LCD_LAYER_FORMAT_RGBX8888;
244 		break;
245 	case DRM_FORMAT_ARGB8888:
246 		val = LCD_LAYER_FORMAT_RGBA8888 | LCD_LAYER_BGR_ORDER;
247 		break;
248 	case DRM_FORMAT_ABGR8888:
249 		val = LCD_LAYER_FORMAT_RGBA8888;
250 		break;
251 	}
252 	DRM_INFO_ONCE("%s : %d format=0x%x val=0x%x\n",
253 		      __func__, __LINE__, format, val);
254 	return val;
255 }
256 
257 static unsigned int get_bits_per_pixel(const struct drm_format_info *format)
258 {
259 	u32 bpp = 0;
260 	unsigned int val = 0;
261 
262 	if (format->num_planes > 1) {
263 		val = LCD_LAYER_8BPP;
264 		return val;
265 	}
266 
267 	bpp += 8 * format->cpp[0];
268 
269 	switch (bpp) {
270 	case 8:
271 		val = LCD_LAYER_8BPP;
272 		break;
273 	case 16:
274 		val = LCD_LAYER_16BPP;
275 		break;
276 	case 24:
277 		val = LCD_LAYER_24BPP;
278 		break;
279 	case 32:
280 		val = LCD_LAYER_32BPP;
281 		break;
282 	}
283 
284 	DRM_DEBUG("bpp=%d val=0x%x\n", bpp, val);
285 	return val;
286 }
287 
288 static void config_csc(struct kmb_drm_private *kmb, int plane_id)
289 {
290 	/* YUV to RGB conversion using the fixed matrix csc_coef_lcd */
291 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF11(plane_id), csc_coef_lcd[0]);
292 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF12(plane_id), csc_coef_lcd[1]);
293 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF13(plane_id), csc_coef_lcd[2]);
294 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF21(plane_id), csc_coef_lcd[3]);
295 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF22(plane_id), csc_coef_lcd[4]);
296 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF23(plane_id), csc_coef_lcd[5]);
297 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF31(plane_id), csc_coef_lcd[6]);
298 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF32(plane_id), csc_coef_lcd[7]);
299 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF33(plane_id), csc_coef_lcd[8]);
300 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF1(plane_id), csc_coef_lcd[9]);
301 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF2(plane_id), csc_coef_lcd[10]);
302 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]);
303 }
304 
305 static void kmb_plane_set_alpha(struct kmb_drm_private *kmb,
306 				const struct drm_plane_state *state,
307 				unsigned char plane_id,
308 				unsigned int *val)
309 {
310 	u16 plane_alpha = state->alpha;
311 	u16 pixel_blend_mode = state->pixel_blend_mode;
312 	int has_alpha = state->fb->format->has_alpha;
313 
314 	if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE)
315 		*val |= LCD_LAYER_ALPHA_STATIC;
316 
317 	if (has_alpha) {
318 		switch (pixel_blend_mode) {
319 		case DRM_MODE_BLEND_PIXEL_NONE:
320 			break;
321 		case DRM_MODE_BLEND_PREMULTI:
322 			*val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT;
323 			break;
324 		case DRM_MODE_BLEND_COVERAGE:
325 			*val |= LCD_LAYER_ALPHA_EMBED;
326 			break;
327 		default:
328 			DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n",
329 				  __stringify(pixel_blend_mode),
330 				  (long)pixel_blend_mode);
331 			break;
332 		}
333 	}
334 
335 	if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) {
336 		*val &= LCD_LAYER_ALPHA_DISABLED;
337 		return;
338 	}
339 
340 	kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha);
341 }
342 
343 static void kmb_plane_atomic_update(struct drm_plane *plane,
344 				    struct drm_atomic_state *state)
345 {
346 	struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state,
347 										 plane);
348 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
349 										 plane);
350 	struct drm_framebuffer *fb;
351 	struct kmb_drm_private *kmb;
352 	unsigned int width;
353 	unsigned int height;
354 	unsigned int dma_len;
355 	struct kmb_plane *kmb_plane;
356 	unsigned int dma_cfg;
357 	unsigned int ctrl = 0, val = 0, out_format = 0;
358 	unsigned int src_w, src_h, crtc_x, crtc_y;
359 	unsigned char plane_id;
360 	int num_planes;
361 	static dma_addr_t addr[MAX_SUB_PLANES];
362 	struct disp_cfg *init_disp_cfg;
363 
364 	if (!plane || !new_plane_state || !old_plane_state)
365 		return;
366 
367 	fb = new_plane_state->fb;
368 	if (!fb)
369 		return;
370 
371 	num_planes = fb->format->num_planes;
372 	kmb_plane = to_kmb_plane(plane);
373 
374 	kmb = to_kmb(plane->dev);
375 	plane_id = kmb_plane->id;
376 
377 	spin_lock_irq(&kmb->irq_lock);
378 	if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
379 		spin_unlock_irq(&kmb->irq_lock);
380 		drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning");
381 		return;
382 	}
383 	spin_unlock_irq(&kmb->irq_lock);
384 
385 	init_disp_cfg = &kmb->init_disp_cfg[plane_id];
386 	src_w = new_plane_state->src_w >> 16;
387 	src_h = new_plane_state->src_h >> 16;
388 	crtc_x = new_plane_state->crtc_x;
389 	crtc_y = new_plane_state->crtc_y;
390 
391 	drm_dbg(&kmb->drm,
392 		"src_w=%d src_h=%d, fb->format->format=0x%x fb->flags=0x%x\n",
393 		  src_w, src_h, fb->format->format, fb->flags);
394 
395 	width = fb->width;
396 	height = fb->height;
397 	dma_len = (width * height * fb->format->cpp[0]);
398 	drm_dbg(&kmb->drm, "dma_len=%d ", dma_len);
399 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN(plane_id), dma_len);
400 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN_SHADOW(plane_id), dma_len);
401 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_VSTRIDE(plane_id),
402 		      fb->pitches[0]);
403 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_WIDTH(plane_id),
404 		      (width * fb->format->cpp[0]));
405 
406 	addr[Y_PLANE] = drm_fb_dma_get_gem_addr(fb, new_plane_state, 0);
407 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_START_ADDR(plane_id),
408 		      addr[Y_PLANE] + fb->offsets[0]);
409 	val = get_pixel_format(fb->format->format);
410 	val |= get_bits_per_pixel(fb->format);
411 	/* Program Cb/Cr for planar formats */
412 	if (num_planes > 1) {
413 		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id),
414 			      width * fb->format->cpp[0]);
415 		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_WIDTH(plane_id),
416 			      (width * fb->format->cpp[0]));
417 
418 		addr[U_PLANE] = drm_fb_dma_get_gem_addr(fb, new_plane_state,
419 							U_PLANE);
420 		/* check if Cb/Cr is swapped*/
421 		if (num_planes == 3 && (val & LCD_LAYER_CRCB_ORDER))
422 			kmb_write_lcd(kmb,
423 				      LCD_LAYERn_DMA_START_CR_ADR(plane_id),
424 					addr[U_PLANE]);
425 		else
426 			kmb_write_lcd(kmb,
427 				      LCD_LAYERn_DMA_START_CB_ADR(plane_id),
428 					addr[U_PLANE]);
429 
430 		if (num_planes == 3) {
431 			kmb_write_lcd(kmb,
432 				      LCD_LAYERn_DMA_CR_LINE_VSTRIDE(plane_id),
433 				      ((width) * fb->format->cpp[0]));
434 
435 			kmb_write_lcd(kmb,
436 				      LCD_LAYERn_DMA_CR_LINE_WIDTH(plane_id),
437 				      ((width) * fb->format->cpp[0]));
438 
439 			addr[V_PLANE] = drm_fb_dma_get_gem_addr(fb,
440 								new_plane_state,
441 								V_PLANE);
442 
443 			/* check if Cb/Cr is swapped*/
444 			if (val & LCD_LAYER_CRCB_ORDER)
445 				kmb_write_lcd(kmb,
446 					      LCD_LAYERn_DMA_START_CB_ADR(plane_id),
447 					      addr[V_PLANE]);
448 			else
449 				kmb_write_lcd(kmb,
450 					      LCD_LAYERn_DMA_START_CR_ADR(plane_id),
451 					      addr[V_PLANE]);
452 		}
453 	}
454 
455 	kmb_write_lcd(kmb, LCD_LAYERn_WIDTH(plane_id), src_w - 1);
456 	kmb_write_lcd(kmb, LCD_LAYERn_HEIGHT(plane_id), src_h - 1);
457 	kmb_write_lcd(kmb, LCD_LAYERn_COL_START(plane_id), crtc_x);
458 	kmb_write_lcd(kmb, LCD_LAYERn_ROW_START(plane_id), crtc_y);
459 
460 	val |= LCD_LAYER_FIFO_100;
461 
462 	if (val & LCD_LAYER_PLANAR_STORAGE) {
463 		val |= LCD_LAYER_CSC_EN;
464 
465 		/* Enable CSC if input is planar and output is RGB */
466 		config_csc(kmb, plane_id);
467 	}
468 
469 	kmb_plane_set_alpha(kmb, plane->state, plane_id, &val);
470 
471 	kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val);
472 
473 	/* Configure LCD_CONTROL */
474 	ctrl = kmb_read_lcd(kmb, LCD_CONTROL);
475 
476 	/* Set layer blending config */
477 	ctrl &= ~LCD_CTRL_ALPHA_ALL;
478 	ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 |
479 		LCD_CTRL_ALPHA_BLEND_VL2;
480 
481 	ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE;
482 
483 	switch (plane_id) {
484 	case LAYER_0:
485 		ctrl |= LCD_CTRL_VL1_ENABLE;
486 		break;
487 	case LAYER_1:
488 		ctrl |= LCD_CTRL_VL2_ENABLE;
489 		break;
490 	case LAYER_2:
491 		ctrl |= LCD_CTRL_GL1_ENABLE;
492 		break;
493 	case LAYER_3:
494 		ctrl |= LCD_CTRL_GL2_ENABLE;
495 		break;
496 	}
497 
498 	ctrl |= LCD_CTRL_PROGRESSIVE | LCD_CTRL_TIM_GEN_ENABLE
499 	    | LCD_CTRL_CONTINUOUS | LCD_CTRL_OUTPUT_ENABLED;
500 
501 	/* LCD is connected to MIPI on kmb
502 	 * Therefore this bit is required for DSI Tx
503 	 */
504 	ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL;
505 
506 	kmb_write_lcd(kmb, LCD_CONTROL, ctrl);
507 
508 	/* Enable pipeline AXI read transactions for the DMA
509 	 * after setting graphics layers. This must be done
510 	 * in a separate write cycle.
511 	 */
512 	kmb_set_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
513 
514 	/* FIXME no doc on how to set output format, these values are taken
515 	 * from the Myriadx tests
516 	 */
517 	out_format |= LCD_OUTF_FORMAT_RGB888;
518 
519 	/* Leave RGB order,conversion mode and clip mode to default */
520 	/* do not interleave RGB channels for mipi Tx compatibility */
521 	out_format |= LCD_OUTF_MIPI_RGB_MODE;
522 	kmb_write_lcd(kmb, LCD_OUT_FORMAT_CFG, out_format);
523 
524 	dma_cfg = LCD_DMA_LAYER_ENABLE | LCD_DMA_LAYER_VSTRIDE_EN |
525 	    LCD_DMA_LAYER_CONT_UPDATE | LCD_DMA_LAYER_AXI_BURST_16;
526 
527 	/* Enable DMA */
528 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg);
529 
530 	/* Save initial display config */
531 	if (!init_disp_cfg->width ||
532 	    !init_disp_cfg->height ||
533 	    !init_disp_cfg->format) {
534 		init_disp_cfg->width = width;
535 		init_disp_cfg->height = height;
536 		init_disp_cfg->format = fb->format->format;
537 	}
538 
539 	drm_dbg(&kmb->drm, "dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg,
540 		kmb_read_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id)));
541 
542 	kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, LCD_INT_EOF |
543 			LCD_INT_DMA_ERR);
544 	kmb_set_bitmask_lcd(kmb, LCD_INT_ENABLE, LCD_INT_EOF |
545 			LCD_INT_DMA_ERR);
546 }
547 
548 static const struct drm_plane_helper_funcs kmb_plane_helper_funcs = {
549 	.atomic_check = kmb_plane_atomic_check,
550 	.atomic_update = kmb_plane_atomic_update,
551 	.atomic_disable = kmb_plane_atomic_disable
552 };
553 
554 void kmb_plane_destroy(struct drm_plane *plane)
555 {
556 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
557 
558 	drm_plane_cleanup(plane);
559 	kfree(kmb_plane);
560 }
561 
562 static const struct drm_plane_funcs kmb_plane_funcs = {
563 	.update_plane = drm_atomic_helper_update_plane,
564 	.disable_plane = drm_atomic_helper_disable_plane,
565 	.destroy = kmb_plane_destroy,
566 	.reset = drm_atomic_helper_plane_reset,
567 	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
568 	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
569 };
570 
571 struct kmb_plane *kmb_plane_init(struct drm_device *drm)
572 {
573 	struct kmb_drm_private *kmb = to_kmb(drm);
574 	struct kmb_plane *plane = NULL;
575 	struct kmb_plane *primary = NULL;
576 	int i = 0;
577 	int ret = 0;
578 	enum drm_plane_type plane_type;
579 	const u32 *plane_formats;
580 	int num_plane_formats;
581 	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
582 				  BIT(DRM_MODE_BLEND_PREMULTI)   |
583 				  BIT(DRM_MODE_BLEND_COVERAGE);
584 
585 	for (i = 0; i < KMB_MAX_PLANES; i++) {
586 		plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL);
587 
588 		if (!plane) {
589 			drm_err(drm, "Failed to allocate plane\n");
590 			return ERR_PTR(-ENOMEM);
591 		}
592 
593 		plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY :
594 		    DRM_PLANE_TYPE_OVERLAY;
595 		if (i < 2) {
596 			plane_formats = kmb_formats_v;
597 			num_plane_formats = ARRAY_SIZE(kmb_formats_v);
598 		} else {
599 			plane_formats = kmb_formats_g;
600 			num_plane_formats = ARRAY_SIZE(kmb_formats_g);
601 		}
602 
603 		ret = drm_universal_plane_init(drm, &plane->base_plane,
604 					       POSSIBLE_CRTCS, &kmb_plane_funcs,
605 					       plane_formats, num_plane_formats,
606 					       NULL, plane_type, "plane %d", i);
607 		if (ret < 0) {
608 			drm_err(drm, "drm_universal_plane_init failed (ret=%d)",
609 				ret);
610 			goto cleanup;
611 		}
612 		drm_dbg(drm, "%s : %d i=%d type=%d",
613 			__func__, __LINE__,
614 			  i, plane_type);
615 		drm_plane_create_alpha_property(&plane->base_plane);
616 
617 		drm_plane_create_blend_mode_property(&plane->base_plane,
618 						     blend_caps);
619 
620 		drm_plane_create_zpos_immutable_property(&plane->base_plane, i);
621 
622 		drm_plane_helper_add(&plane->base_plane,
623 				     &kmb_plane_helper_funcs);
624 
625 		if (plane_type == DRM_PLANE_TYPE_PRIMARY) {
626 			primary = plane;
627 			kmb->plane = plane;
628 		}
629 		drm_dbg(drm, "%s : %d primary=%p\n", __func__, __LINE__,
630 			&primary->base_plane);
631 		plane->id = i;
632 	}
633 
634 	/* Disable pipeline AXI read transactions for the DMA
635 	 * prior to setting graphics layers
636 	 */
637 	kmb_clr_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
638 
639 	return primary;
640 cleanup:
641 	drmm_kfree(drm, plane);
642 	return ERR_PTR(ret);
643 }
644