xref: /openbmc/linux/drivers/gpu/drm/kmb/kmb_plane.c (revision bf89b7ee)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright © 2018-2020 Intel Corporation
4  */
5 
6 #include <drm/drm_atomic.h>
7 #include <drm/drm_atomic_helper.h>
8 #include <drm/drm_blend.h>
9 #include <drm/drm_crtc.h>
10 #include <drm/drm_fb_dma_helper.h>
11 #include <drm/drm_fourcc.h>
12 #include <drm/drm_framebuffer.h>
13 #include <drm/drm_gem_dma_helper.h>
14 #include <drm/drm_managed.h>
15 
16 #include "kmb_drv.h"
17 #include "kmb_plane.h"
18 #include "kmb_regs.h"
19 
20 const u32 layer_irqs[] = {
21 	LCD_INT_VL0,
22 	LCD_INT_VL1,
23 	LCD_INT_GL0,
24 	LCD_INT_GL1
25 };
26 
27 /* Conversion (yuv->rgb) matrix from myriadx */
28 static const u32 csc_coef_lcd[] = {
29 	1024, 0, 1436,
30 	1024, -352, -731,
31 	1024, 1814, 0,
32 	-179, 125, -226
33 };
34 
35 /* Graphics layer (layers 2 & 3) formats, only packed formats  are supported */
36 static const u32 kmb_formats_g[] = {
37 	DRM_FORMAT_RGB332,
38 	DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444,
39 	DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444,
40 	DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555,
41 	DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555,
42 	DRM_FORMAT_RGB565, DRM_FORMAT_BGR565,
43 	DRM_FORMAT_RGB888, DRM_FORMAT_BGR888,
44 	DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
45 	DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888,
46 };
47 
48 /* Video layer ( 0 & 1) formats, packed and planar formats are supported */
49 static const u32 kmb_formats_v[] = {
50 	/* packed formats */
51 	DRM_FORMAT_RGB332,
52 	DRM_FORMAT_XRGB4444, DRM_FORMAT_XBGR4444,
53 	DRM_FORMAT_ARGB4444, DRM_FORMAT_ABGR4444,
54 	DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555,
55 	DRM_FORMAT_ARGB1555, DRM_FORMAT_ABGR1555,
56 	DRM_FORMAT_RGB565, DRM_FORMAT_BGR565,
57 	DRM_FORMAT_RGB888, DRM_FORMAT_BGR888,
58 	DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
59 	DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888,
60 	/*planar formats */
61 	DRM_FORMAT_YUV420, DRM_FORMAT_YVU420,
62 	DRM_FORMAT_YUV422, DRM_FORMAT_YVU422,
63 	DRM_FORMAT_YUV444, DRM_FORMAT_YVU444,
64 	DRM_FORMAT_NV12, DRM_FORMAT_NV21,
65 };
66 
67 static unsigned int check_pixel_format(struct drm_plane *plane, u32 format)
68 {
69 	struct kmb_drm_private *kmb;
70 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
71 	int i;
72 	int plane_id = kmb_plane->id;
73 	struct disp_cfg init_disp_cfg;
74 
75 	kmb = to_kmb(plane->dev);
76 	init_disp_cfg = kmb->init_disp_cfg[plane_id];
77 	/* Due to HW limitations, changing pixel format after initial
78 	 * plane configuration is not supported.
79 	 */
80 	if (init_disp_cfg.format && init_disp_cfg.format != format) {
81 		drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration");
82 		return -EINVAL;
83 	}
84 	for (i = 0; i < plane->format_count; i++) {
85 		if (plane->format_types[i] == format)
86 			return 0;
87 	}
88 	return -EINVAL;
89 }
90 
91 static int kmb_plane_atomic_check(struct drm_plane *plane,
92 				  struct drm_atomic_state *state)
93 {
94 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
95 										 plane);
96 	struct kmb_drm_private *kmb;
97 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
98 	int plane_id = kmb_plane->id;
99 	struct disp_cfg init_disp_cfg;
100 	struct drm_framebuffer *fb;
101 	int ret;
102 	struct drm_crtc_state *crtc_state;
103 	bool can_position;
104 
105 	kmb = to_kmb(plane->dev);
106 	init_disp_cfg = kmb->init_disp_cfg[plane_id];
107 	fb = new_plane_state->fb;
108 	if (!fb || !new_plane_state->crtc)
109 		return 0;
110 
111 	ret = check_pixel_format(plane, fb->format->format);
112 	if (ret)
113 		return ret;
114 
115 	if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH ||
116 	    new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT ||
117 	    new_plane_state->crtc_w < KMB_FB_MIN_WIDTH ||
118 	    new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT)
119 		return -EINVAL;
120 
121 	/* Due to HW limitations, changing plane height or width after
122 	 * initial plane configuration is not supported.
123 	 */
124 	if ((init_disp_cfg.width && init_disp_cfg.height) &&
125 	    (init_disp_cfg.width != fb->width ||
126 	    init_disp_cfg.height != fb->height)) {
127 		drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration");
128 		return -EINVAL;
129 	}
130 	can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
131 	crtc_state =
132 		drm_atomic_get_existing_crtc_state(state,
133 						   new_plane_state->crtc);
134 	return drm_atomic_helper_check_plane_state(new_plane_state,
135 						   crtc_state,
136 						   DRM_PLANE_NO_SCALING,
137 						   DRM_PLANE_NO_SCALING,
138 						   can_position, true);
139 }
140 
141 static void kmb_plane_atomic_disable(struct drm_plane *plane,
142 				     struct drm_atomic_state *state)
143 {
144 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
145 	int plane_id = kmb_plane->id;
146 	struct kmb_drm_private *kmb;
147 
148 	kmb = to_kmb(plane->dev);
149 
150 	if (WARN_ON(plane_id >= KMB_MAX_PLANES))
151 		return;
152 
153 	switch (plane_id) {
154 	case LAYER_0:
155 		kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL1_ENABLE;
156 		break;
157 	case LAYER_1:
158 		kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL2_ENABLE;
159 		break;
160 	}
161 
162 	kmb->plane_status[plane_id].disable = true;
163 }
164 
165 static unsigned int get_pixel_format(u32 format)
166 {
167 	unsigned int val = 0;
168 
169 	switch (format) {
170 		/* planar formats */
171 	case DRM_FORMAT_YUV444:
172 		val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE;
173 		break;
174 	case DRM_FORMAT_YVU444:
175 		val = LCD_LAYER_FORMAT_YCBCR444PLAN | LCD_LAYER_PLANAR_STORAGE
176 		    | LCD_LAYER_CRCB_ORDER;
177 		break;
178 	case DRM_FORMAT_YUV422:
179 		val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE;
180 		break;
181 	case DRM_FORMAT_YVU422:
182 		val = LCD_LAYER_FORMAT_YCBCR422PLAN | LCD_LAYER_PLANAR_STORAGE
183 		    | LCD_LAYER_CRCB_ORDER;
184 		break;
185 	case DRM_FORMAT_YUV420:
186 		val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE;
187 		break;
188 	case DRM_FORMAT_YVU420:
189 		val = LCD_LAYER_FORMAT_YCBCR420PLAN | LCD_LAYER_PLANAR_STORAGE
190 		    | LCD_LAYER_CRCB_ORDER;
191 		break;
192 	case DRM_FORMAT_NV12:
193 		val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE;
194 		break;
195 	case DRM_FORMAT_NV21:
196 		val = LCD_LAYER_FORMAT_NV12 | LCD_LAYER_PLANAR_STORAGE
197 		    | LCD_LAYER_CRCB_ORDER;
198 		break;
199 		/* packed formats */
200 		/* looks hw requires B & G to be swapped when RGB */
201 	case DRM_FORMAT_RGB332:
202 		val = LCD_LAYER_FORMAT_RGB332 | LCD_LAYER_BGR_ORDER;
203 		break;
204 	case DRM_FORMAT_XBGR4444:
205 		val = LCD_LAYER_FORMAT_RGBX4444;
206 		break;
207 	case DRM_FORMAT_ARGB4444:
208 		val = LCD_LAYER_FORMAT_RGBA4444 | LCD_LAYER_BGR_ORDER;
209 		break;
210 	case DRM_FORMAT_ABGR4444:
211 		val = LCD_LAYER_FORMAT_RGBA4444;
212 		break;
213 	case DRM_FORMAT_XRGB1555:
214 		val = LCD_LAYER_FORMAT_XRGB1555 | LCD_LAYER_BGR_ORDER;
215 		break;
216 	case DRM_FORMAT_XBGR1555:
217 		val = LCD_LAYER_FORMAT_XRGB1555;
218 		break;
219 	case DRM_FORMAT_ARGB1555:
220 		val = LCD_LAYER_FORMAT_RGBA1555 | LCD_LAYER_BGR_ORDER;
221 		break;
222 	case DRM_FORMAT_ABGR1555:
223 		val = LCD_LAYER_FORMAT_RGBA1555;
224 		break;
225 	case DRM_FORMAT_RGB565:
226 		val = LCD_LAYER_FORMAT_RGB565 | LCD_LAYER_BGR_ORDER;
227 		break;
228 	case DRM_FORMAT_BGR565:
229 		val = LCD_LAYER_FORMAT_RGB565;
230 		break;
231 	case DRM_FORMAT_RGB888:
232 		val = LCD_LAYER_FORMAT_RGB888 | LCD_LAYER_BGR_ORDER;
233 		break;
234 	case DRM_FORMAT_BGR888:
235 		val = LCD_LAYER_FORMAT_RGB888;
236 		break;
237 	case DRM_FORMAT_XRGB8888:
238 		val = LCD_LAYER_FORMAT_RGBX8888 | LCD_LAYER_BGR_ORDER;
239 		break;
240 	case DRM_FORMAT_XBGR8888:
241 		val = LCD_LAYER_FORMAT_RGBX8888;
242 		break;
243 	case DRM_FORMAT_ARGB8888:
244 		val = LCD_LAYER_FORMAT_RGBA8888 | LCD_LAYER_BGR_ORDER;
245 		break;
246 	case DRM_FORMAT_ABGR8888:
247 		val = LCD_LAYER_FORMAT_RGBA8888;
248 		break;
249 	}
250 	DRM_INFO_ONCE("%s : %d format=0x%x val=0x%x\n",
251 		      __func__, __LINE__, format, val);
252 	return val;
253 }
254 
255 static unsigned int get_bits_per_pixel(const struct drm_format_info *format)
256 {
257 	u32 bpp = 0;
258 	unsigned int val = 0;
259 
260 	if (format->num_planes > 1) {
261 		val = LCD_LAYER_8BPP;
262 		return val;
263 	}
264 
265 	bpp += 8 * format->cpp[0];
266 
267 	switch (bpp) {
268 	case 8:
269 		val = LCD_LAYER_8BPP;
270 		break;
271 	case 16:
272 		val = LCD_LAYER_16BPP;
273 		break;
274 	case 24:
275 		val = LCD_LAYER_24BPP;
276 		break;
277 	case 32:
278 		val = LCD_LAYER_32BPP;
279 		break;
280 	}
281 
282 	DRM_DEBUG("bpp=%d val=0x%x\n", bpp, val);
283 	return val;
284 }
285 
286 static void config_csc(struct kmb_drm_private *kmb, int plane_id)
287 {
288 	/* YUV to RGB conversion using the fixed matrix csc_coef_lcd */
289 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF11(plane_id), csc_coef_lcd[0]);
290 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF12(plane_id), csc_coef_lcd[1]);
291 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF13(plane_id), csc_coef_lcd[2]);
292 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF21(plane_id), csc_coef_lcd[3]);
293 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF22(plane_id), csc_coef_lcd[4]);
294 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF23(plane_id), csc_coef_lcd[5]);
295 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF31(plane_id), csc_coef_lcd[6]);
296 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF32(plane_id), csc_coef_lcd[7]);
297 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_COEFF33(plane_id), csc_coef_lcd[8]);
298 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF1(plane_id), csc_coef_lcd[9]);
299 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF2(plane_id), csc_coef_lcd[10]);
300 	kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]);
301 }
302 
303 static void kmb_plane_set_alpha(struct kmb_drm_private *kmb,
304 				const struct drm_plane_state *state,
305 				unsigned char plane_id,
306 				unsigned int *val)
307 {
308 	u16 plane_alpha = state->alpha;
309 	u16 pixel_blend_mode = state->pixel_blend_mode;
310 	int has_alpha = state->fb->format->has_alpha;
311 
312 	if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE)
313 		*val |= LCD_LAYER_ALPHA_STATIC;
314 
315 	if (has_alpha) {
316 		switch (pixel_blend_mode) {
317 		case DRM_MODE_BLEND_PIXEL_NONE:
318 			break;
319 		case DRM_MODE_BLEND_PREMULTI:
320 			*val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT;
321 			break;
322 		case DRM_MODE_BLEND_COVERAGE:
323 			*val |= LCD_LAYER_ALPHA_EMBED;
324 			break;
325 		default:
326 			DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n",
327 				  __stringify(pixel_blend_mode),
328 				  (long)pixel_blend_mode);
329 			break;
330 		}
331 	}
332 
333 	if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) {
334 		*val &= LCD_LAYER_ALPHA_DISABLED;
335 		return;
336 	}
337 
338 	kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha);
339 }
340 
341 static void kmb_plane_atomic_update(struct drm_plane *plane,
342 				    struct drm_atomic_state *state)
343 {
344 	struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state,
345 										 plane);
346 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
347 										 plane);
348 	struct drm_framebuffer *fb;
349 	struct kmb_drm_private *kmb;
350 	unsigned int width;
351 	unsigned int height;
352 	unsigned int dma_len;
353 	struct kmb_plane *kmb_plane;
354 	unsigned int dma_cfg;
355 	unsigned int ctrl = 0, val = 0, out_format = 0;
356 	unsigned int src_w, src_h, crtc_x, crtc_y;
357 	unsigned char plane_id;
358 	int num_planes;
359 	static dma_addr_t addr[MAX_SUB_PLANES];
360 	struct disp_cfg *init_disp_cfg;
361 
362 	if (!plane || !new_plane_state || !old_plane_state)
363 		return;
364 
365 	fb = new_plane_state->fb;
366 	if (!fb)
367 		return;
368 
369 	num_planes = fb->format->num_planes;
370 	kmb_plane = to_kmb_plane(plane);
371 
372 	kmb = to_kmb(plane->dev);
373 	plane_id = kmb_plane->id;
374 
375 	spin_lock_irq(&kmb->irq_lock);
376 	if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
377 		spin_unlock_irq(&kmb->irq_lock);
378 		drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning");
379 		return;
380 	}
381 	spin_unlock_irq(&kmb->irq_lock);
382 
383 	init_disp_cfg = &kmb->init_disp_cfg[plane_id];
384 	src_w = new_plane_state->src_w >> 16;
385 	src_h = new_plane_state->src_h >> 16;
386 	crtc_x = new_plane_state->crtc_x;
387 	crtc_y = new_plane_state->crtc_y;
388 
389 	drm_dbg(&kmb->drm,
390 		"src_w=%d src_h=%d, fb->format->format=0x%x fb->flags=0x%x\n",
391 		  src_w, src_h, fb->format->format, fb->flags);
392 
393 	width = fb->width;
394 	height = fb->height;
395 	dma_len = (width * height * fb->format->cpp[0]);
396 	drm_dbg(&kmb->drm, "dma_len=%d ", dma_len);
397 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN(plane_id), dma_len);
398 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LEN_SHADOW(plane_id), dma_len);
399 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_VSTRIDE(plane_id),
400 		      fb->pitches[0]);
401 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_LINE_WIDTH(plane_id),
402 		      (width * fb->format->cpp[0]));
403 
404 	addr[Y_PLANE] = drm_fb_dma_get_gem_addr(fb, new_plane_state, 0);
405 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_START_ADDR(plane_id),
406 		      addr[Y_PLANE] + fb->offsets[0]);
407 	val = get_pixel_format(fb->format->format);
408 	val |= get_bits_per_pixel(fb->format);
409 	/* Program Cb/Cr for planar formats */
410 	if (num_planes > 1) {
411 		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id),
412 			      width * fb->format->cpp[0]);
413 		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_WIDTH(plane_id),
414 			      (width * fb->format->cpp[0]));
415 
416 		addr[U_PLANE] = drm_fb_dma_get_gem_addr(fb, new_plane_state,
417 							U_PLANE);
418 		/* check if Cb/Cr is swapped*/
419 		if (num_planes == 3 && (val & LCD_LAYER_CRCB_ORDER))
420 			kmb_write_lcd(kmb,
421 				      LCD_LAYERn_DMA_START_CR_ADR(plane_id),
422 					addr[U_PLANE]);
423 		else
424 			kmb_write_lcd(kmb,
425 				      LCD_LAYERn_DMA_START_CB_ADR(plane_id),
426 					addr[U_PLANE]);
427 
428 		if (num_planes == 3) {
429 			kmb_write_lcd(kmb,
430 				      LCD_LAYERn_DMA_CR_LINE_VSTRIDE(plane_id),
431 				      ((width) * fb->format->cpp[0]));
432 
433 			kmb_write_lcd(kmb,
434 				      LCD_LAYERn_DMA_CR_LINE_WIDTH(plane_id),
435 				      ((width) * fb->format->cpp[0]));
436 
437 			addr[V_PLANE] = drm_fb_dma_get_gem_addr(fb,
438 								new_plane_state,
439 								V_PLANE);
440 
441 			/* check if Cb/Cr is swapped*/
442 			if (val & LCD_LAYER_CRCB_ORDER)
443 				kmb_write_lcd(kmb,
444 					      LCD_LAYERn_DMA_START_CB_ADR(plane_id),
445 					      addr[V_PLANE]);
446 			else
447 				kmb_write_lcd(kmb,
448 					      LCD_LAYERn_DMA_START_CR_ADR(plane_id),
449 					      addr[V_PLANE]);
450 		}
451 	}
452 
453 	kmb_write_lcd(kmb, LCD_LAYERn_WIDTH(plane_id), src_w - 1);
454 	kmb_write_lcd(kmb, LCD_LAYERn_HEIGHT(plane_id), src_h - 1);
455 	kmb_write_lcd(kmb, LCD_LAYERn_COL_START(plane_id), crtc_x);
456 	kmb_write_lcd(kmb, LCD_LAYERn_ROW_START(plane_id), crtc_y);
457 
458 	val |= LCD_LAYER_FIFO_100;
459 
460 	if (val & LCD_LAYER_PLANAR_STORAGE) {
461 		val |= LCD_LAYER_CSC_EN;
462 
463 		/* Enable CSC if input is planar and output is RGB */
464 		config_csc(kmb, plane_id);
465 	}
466 
467 	kmb_plane_set_alpha(kmb, plane->state, plane_id, &val);
468 
469 	kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val);
470 
471 	/* Configure LCD_CONTROL */
472 	ctrl = kmb_read_lcd(kmb, LCD_CONTROL);
473 
474 	/* Set layer blending config */
475 	ctrl &= ~LCD_CTRL_ALPHA_ALL;
476 	ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 |
477 		LCD_CTRL_ALPHA_BLEND_VL2;
478 
479 	ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE;
480 
481 	switch (plane_id) {
482 	case LAYER_0:
483 		ctrl |= LCD_CTRL_VL1_ENABLE;
484 		break;
485 	case LAYER_1:
486 		ctrl |= LCD_CTRL_VL2_ENABLE;
487 		break;
488 	case LAYER_2:
489 		ctrl |= LCD_CTRL_GL1_ENABLE;
490 		break;
491 	case LAYER_3:
492 		ctrl |= LCD_CTRL_GL2_ENABLE;
493 		break;
494 	}
495 
496 	ctrl |= LCD_CTRL_PROGRESSIVE | LCD_CTRL_TIM_GEN_ENABLE
497 	    | LCD_CTRL_CONTINUOUS | LCD_CTRL_OUTPUT_ENABLED;
498 
499 	/* LCD is connected to MIPI on kmb
500 	 * Therefore this bit is required for DSI Tx
501 	 */
502 	ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL;
503 
504 	kmb_write_lcd(kmb, LCD_CONTROL, ctrl);
505 
506 	/* Enable pipeline AXI read transactions for the DMA
507 	 * after setting graphics layers. This must be done
508 	 * in a separate write cycle.
509 	 */
510 	kmb_set_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
511 
512 	/* FIXME no doc on how to set output format, these values are taken
513 	 * from the Myriadx tests
514 	 */
515 	out_format |= LCD_OUTF_FORMAT_RGB888;
516 
517 	/* Leave RGB order,conversion mode and clip mode to default */
518 	/* do not interleave RGB channels for mipi Tx compatibility */
519 	out_format |= LCD_OUTF_MIPI_RGB_MODE;
520 	kmb_write_lcd(kmb, LCD_OUT_FORMAT_CFG, out_format);
521 
522 	dma_cfg = LCD_DMA_LAYER_ENABLE | LCD_DMA_LAYER_VSTRIDE_EN |
523 	    LCD_DMA_LAYER_CONT_UPDATE | LCD_DMA_LAYER_AXI_BURST_16;
524 
525 	/* Enable DMA */
526 	kmb_write_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg);
527 
528 	/* Save initial display config */
529 	if (!init_disp_cfg->width ||
530 	    !init_disp_cfg->height ||
531 	    !init_disp_cfg->format) {
532 		init_disp_cfg->width = width;
533 		init_disp_cfg->height = height;
534 		init_disp_cfg->format = fb->format->format;
535 	}
536 
537 	drm_dbg(&kmb->drm, "dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg,
538 		kmb_read_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id)));
539 
540 	kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, LCD_INT_EOF |
541 			LCD_INT_DMA_ERR);
542 	kmb_set_bitmask_lcd(kmb, LCD_INT_ENABLE, LCD_INT_EOF |
543 			LCD_INT_DMA_ERR);
544 }
545 
546 static const struct drm_plane_helper_funcs kmb_plane_helper_funcs = {
547 	.atomic_check = kmb_plane_atomic_check,
548 	.atomic_update = kmb_plane_atomic_update,
549 	.atomic_disable = kmb_plane_atomic_disable
550 };
551 
552 void kmb_plane_destroy(struct drm_plane *plane)
553 {
554 	struct kmb_plane *kmb_plane = to_kmb_plane(plane);
555 
556 	drm_plane_cleanup(plane);
557 	kfree(kmb_plane);
558 }
559 
560 static const struct drm_plane_funcs kmb_plane_funcs = {
561 	.update_plane = drm_atomic_helper_update_plane,
562 	.disable_plane = drm_atomic_helper_disable_plane,
563 	.destroy = kmb_plane_destroy,
564 	.reset = drm_atomic_helper_plane_reset,
565 	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
566 	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
567 };
568 
569 struct kmb_plane *kmb_plane_init(struct drm_device *drm)
570 {
571 	struct kmb_drm_private *kmb = to_kmb(drm);
572 	struct kmb_plane *plane = NULL;
573 	struct kmb_plane *primary = NULL;
574 	int i = 0;
575 	int ret = 0;
576 	enum drm_plane_type plane_type;
577 	const u32 *plane_formats;
578 	int num_plane_formats;
579 	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
580 				  BIT(DRM_MODE_BLEND_PREMULTI)   |
581 				  BIT(DRM_MODE_BLEND_COVERAGE);
582 
583 	for (i = 0; i < KMB_MAX_PLANES; i++) {
584 		plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL);
585 
586 		if (!plane) {
587 			drm_err(drm, "Failed to allocate plane\n");
588 			return ERR_PTR(-ENOMEM);
589 		}
590 
591 		plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY :
592 		    DRM_PLANE_TYPE_OVERLAY;
593 		if (i < 2) {
594 			plane_formats = kmb_formats_v;
595 			num_plane_formats = ARRAY_SIZE(kmb_formats_v);
596 		} else {
597 			plane_formats = kmb_formats_g;
598 			num_plane_formats = ARRAY_SIZE(kmb_formats_g);
599 		}
600 
601 		ret = drm_universal_plane_init(drm, &plane->base_plane,
602 					       POSSIBLE_CRTCS, &kmb_plane_funcs,
603 					       plane_formats, num_plane_formats,
604 					       NULL, plane_type, "plane %d", i);
605 		if (ret < 0) {
606 			drm_err(drm, "drm_universal_plane_init failed (ret=%d)",
607 				ret);
608 			goto cleanup;
609 		}
610 		drm_dbg(drm, "%s : %d i=%d type=%d",
611 			__func__, __LINE__,
612 			  i, plane_type);
613 		drm_plane_create_alpha_property(&plane->base_plane);
614 
615 		drm_plane_create_blend_mode_property(&plane->base_plane,
616 						     blend_caps);
617 
618 		drm_plane_create_zpos_immutable_property(&plane->base_plane, i);
619 
620 		drm_plane_helper_add(&plane->base_plane,
621 				     &kmb_plane_helper_funcs);
622 
623 		if (plane_type == DRM_PLANE_TYPE_PRIMARY) {
624 			primary = plane;
625 			kmb->plane = plane;
626 		}
627 		drm_dbg(drm, "%s : %d primary=%p\n", __func__, __LINE__,
628 			&primary->base_plane);
629 		plane->id = i;
630 	}
631 
632 	/* Disable pipeline AXI read transactions for the DMA
633 	 * prior to setting graphics layers
634 	 */
635 	kmb_clr_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
636 
637 	return primary;
638 cleanup:
639 	drmm_kfree(drm, plane);
640 	return ERR_PTR(ret);
641 }
642