1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright © 2018-2020 Intel Corporation 4 */ 5 6 #include <linux/clk.h> 7 #include <linux/module.h> 8 #include <linux/of_graph.h> 9 #include <linux/of_platform.h> 10 #include <linux/of_reserved_mem.h> 11 #include <linux/mfd/syscon.h> 12 #include <linux/platform_device.h> 13 #include <linux/pm_runtime.h> 14 #include <linux/regmap.h> 15 16 #include <drm/drm_atomic_helper.h> 17 #include <drm/drm_drv.h> 18 #include <drm/drm_gem_cma_helper.h> 19 #include <drm/drm_gem_framebuffer_helper.h> 20 #include <drm/drm_irq.h> 21 #include <drm/drm_probe_helper.h> 22 #include <drm/drm_vblank.h> 23 24 #include "kmb_drv.h" 25 #include "kmb_dsi.h" 26 #include "kmb_regs.h" 27 28 static int kmb_display_clk_enable(struct kmb_drm_private *kmb) 29 { 30 int ret = 0; 31 32 ret = clk_prepare_enable(kmb->kmb_clk.clk_lcd); 33 if (ret) { 34 drm_err(&kmb->drm, "Failed to enable LCD clock: %d\n", ret); 35 return ret; 36 } 37 DRM_INFO("SUCCESS : enabled LCD clocks\n"); 38 return 0; 39 } 40 41 static int kmb_initialize_clocks(struct kmb_drm_private *kmb, struct device *dev) 42 { 43 int ret = 0; 44 struct regmap *msscam; 45 46 kmb->kmb_clk.clk_lcd = devm_clk_get(dev, "clk_lcd"); 47 if (IS_ERR(kmb->kmb_clk.clk_lcd)) { 48 drm_err(&kmb->drm, "clk_get() failed clk_lcd\n"); 49 return PTR_ERR(kmb->kmb_clk.clk_lcd); 50 } 51 52 kmb->kmb_clk.clk_pll0 = devm_clk_get(dev, "clk_pll0"); 53 if (IS_ERR(kmb->kmb_clk.clk_pll0)) { 54 drm_err(&kmb->drm, "clk_get() failed clk_pll0 "); 55 return PTR_ERR(kmb->kmb_clk.clk_pll0); 56 } 57 kmb->sys_clk_mhz = clk_get_rate(kmb->kmb_clk.clk_pll0) / 1000000; 58 drm_info(&kmb->drm, "system clk = %d Mhz", kmb->sys_clk_mhz); 59 60 ret = kmb_dsi_clk_init(kmb->kmb_dsi); 61 62 /* Set LCD clock to 200 Mhz */ 63 clk_set_rate(kmb->kmb_clk.clk_lcd, KMB_LCD_DEFAULT_CLK); 64 if (clk_get_rate(kmb->kmb_clk.clk_lcd) != KMB_LCD_DEFAULT_CLK) { 65 drm_err(&kmb->drm, "failed to set to clk_lcd to %d\n", 66 KMB_LCD_DEFAULT_CLK); 67 return -1; 68 } 69 drm_dbg(&kmb->drm, "clk_lcd = %ld\n", clk_get_rate(kmb->kmb_clk.clk_lcd)); 70 71 ret = kmb_display_clk_enable(kmb); 72 if (ret) 73 return ret; 74 75 msscam = syscon_regmap_lookup_by_compatible("intel,keembay-msscam"); 76 if (IS_ERR(msscam)) { 77 drm_err(&kmb->drm, "failed to get msscam syscon"); 78 return -1; 79 } 80 81 /* Enable MSS_CAM_CLK_CTRL for MIPI TX and LCD */ 82 regmap_update_bits(msscam, MSS_CAM_CLK_CTRL, 0x1fff, 0x1fff); 83 regmap_update_bits(msscam, MSS_CAM_RSTN_CTRL, 0xffffffff, 0xffffffff); 84 return 0; 85 } 86 87 static void kmb_display_clk_disable(struct kmb_drm_private *kmb) 88 { 89 clk_disable_unprepare(kmb->kmb_clk.clk_lcd); 90 } 91 92 static void __iomem *kmb_map_mmio(struct drm_device *drm, 93 struct platform_device *pdev, 94 char *name) 95 { 96 struct resource *res; 97 void __iomem *mem; 98 99 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); 100 if (!res) { 101 drm_err(drm, "failed to get resource for %s", name); 102 return ERR_PTR(-ENOMEM); 103 } 104 mem = devm_ioremap_resource(drm->dev, res); 105 if (IS_ERR(mem)) 106 drm_err(drm, "failed to ioremap %s registers", name); 107 return mem; 108 } 109 110 static int kmb_hw_init(struct drm_device *drm, unsigned long flags) 111 { 112 struct kmb_drm_private *kmb = to_kmb(drm); 113 struct platform_device *pdev = to_platform_device(drm->dev); 114 int irq_lcd; 115 int ret = 0; 116 117 /* Map LCD MMIO registers */ 118 kmb->lcd_mmio = kmb_map_mmio(drm, pdev, "lcd"); 119 if (IS_ERR(kmb->lcd_mmio)) { 120 drm_err(&kmb->drm, "failed to map LCD registers\n"); 121 return -ENOMEM; 122 } 123 124 /* Map MIPI MMIO registers */ 125 ret = kmb_dsi_map_mmio(kmb->kmb_dsi); 126 if (ret) 127 return ret; 128 129 /* Enable display clocks */ 130 kmb_initialize_clocks(kmb, &pdev->dev); 131 132 /* Register irqs here - section 17.3 in databook 133 * lists LCD at 79 and 82 for MIPI under MSS CPU - 134 * firmware has redirected 79 to A53 IRQ 33 135 */ 136 137 /* Allocate LCD interrupt resources */ 138 irq_lcd = platform_get_irq(pdev, 0); 139 if (irq_lcd < 0) { 140 drm_err(&kmb->drm, "irq_lcd not found"); 141 goto setup_fail; 142 } 143 144 /* Get the optional framebuffer memory resource */ 145 ret = of_reserved_mem_device_init(drm->dev); 146 if (ret && ret != -ENODEV) 147 return ret; 148 149 spin_lock_init(&kmb->irq_lock); 150 151 kmb->irq_lcd = irq_lcd; 152 153 return 0; 154 155 setup_fail: 156 of_reserved_mem_device_release(drm->dev); 157 158 return ret; 159 } 160 161 static const struct drm_mode_config_funcs kmb_mode_config_funcs = { 162 .fb_create = drm_gem_fb_create, 163 .atomic_check = drm_atomic_helper_check, 164 .atomic_commit = drm_atomic_helper_commit, 165 }; 166 167 static int kmb_setup_mode_config(struct drm_device *drm) 168 { 169 int ret; 170 struct kmb_drm_private *kmb = to_kmb(drm); 171 172 ret = drmm_mode_config_init(drm); 173 if (ret) 174 return ret; 175 drm->mode_config.min_width = KMB_MIN_WIDTH; 176 drm->mode_config.min_height = KMB_MIN_HEIGHT; 177 drm->mode_config.max_width = KMB_MAX_WIDTH; 178 drm->mode_config.max_height = KMB_MAX_HEIGHT; 179 drm->mode_config.funcs = &kmb_mode_config_funcs; 180 181 ret = kmb_setup_crtc(drm); 182 if (ret < 0) { 183 drm_err(drm, "failed to create crtc\n"); 184 return ret; 185 } 186 ret = kmb_dsi_encoder_init(drm, kmb->kmb_dsi); 187 /* Set the CRTC's port so that the encoder component can find it */ 188 kmb->crtc.port = of_graph_get_port_by_id(drm->dev->of_node, 0); 189 ret = drm_vblank_init(drm, drm->mode_config.num_crtc); 190 if (ret < 0) { 191 drm_err(drm, "failed to initialize vblank\n"); 192 pm_runtime_disable(drm->dev); 193 return ret; 194 } 195 196 drm_mode_config_reset(drm); 197 return 0; 198 } 199 200 static irqreturn_t handle_lcd_irq(struct drm_device *dev) 201 { 202 unsigned long status, val, val1; 203 int plane_id, dma0_state, dma1_state; 204 struct kmb_drm_private *kmb = to_kmb(dev); 205 206 status = kmb_read_lcd(kmb, LCD_INT_STATUS); 207 208 spin_lock(&kmb->irq_lock); 209 if (status & LCD_INT_EOF) { 210 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_EOF); 211 212 /* When disabling/enabling LCD layers, the change takes effect 213 * immediately and does not wait for EOF (end of frame). 214 * When kmb_plane_atomic_disable is called, mark the plane as 215 * disabled but actually disable the plane when EOF irq is 216 * being handled. 217 */ 218 for (plane_id = LAYER_0; 219 plane_id < KMB_MAX_PLANES; plane_id++) { 220 if (kmb->plane_status[plane_id].disable) { 221 kmb_clr_bitmask_lcd(kmb, 222 LCD_LAYERn_DMA_CFG 223 (plane_id), 224 LCD_DMA_LAYER_ENABLE); 225 226 kmb_clr_bitmask_lcd(kmb, LCD_CONTROL, 227 kmb->plane_status[plane_id].ctrl); 228 229 kmb->plane_status[plane_id].disable = false; 230 } 231 } 232 if (kmb->kmb_under_flow) { 233 /* DMA Recovery after underflow */ 234 dma0_state = (kmb->layer_no == 0) ? 235 LCD_VIDEO0_DMA0_STATE : LCD_VIDEO1_DMA0_STATE; 236 dma1_state = (kmb->layer_no == 0) ? 237 LCD_VIDEO0_DMA1_STATE : LCD_VIDEO1_DMA1_STATE; 238 239 do { 240 kmb_write_lcd(kmb, LCD_FIFO_FLUSH, 1); 241 val = kmb_read_lcd(kmb, dma0_state) 242 & LCD_DMA_STATE_ACTIVE; 243 val1 = kmb_read_lcd(kmb, dma1_state) 244 & LCD_DMA_STATE_ACTIVE; 245 } while ((val || val1)); 246 /* disable dma */ 247 kmb_clr_bitmask_lcd(kmb, 248 LCD_LAYERn_DMA_CFG(kmb->layer_no), 249 LCD_DMA_LAYER_ENABLE); 250 kmb_write_lcd(kmb, LCD_FIFO_FLUSH, 1); 251 kmb->kmb_flush_done = 1; 252 kmb->kmb_under_flow = 0; 253 } 254 } 255 256 if (status & LCD_INT_LINE_CMP) { 257 /* clear line compare interrupt */ 258 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_LINE_CMP); 259 } 260 261 if (status & LCD_INT_VERT_COMP) { 262 /* Read VSTATUS */ 263 val = kmb_read_lcd(kmb, LCD_VSTATUS); 264 val = (val & LCD_VSTATUS_VERTICAL_STATUS_MASK); 265 switch (val) { 266 case LCD_VSTATUS_COMPARE_VSYNC: 267 /* Clear vertical compare interrupt */ 268 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_VERT_COMP); 269 if (kmb->kmb_flush_done) { 270 kmb_set_bitmask_lcd(kmb, 271 LCD_LAYERn_DMA_CFG 272 (kmb->layer_no), 273 LCD_DMA_LAYER_ENABLE); 274 kmb->kmb_flush_done = 0; 275 } 276 drm_crtc_handle_vblank(&kmb->crtc); 277 break; 278 case LCD_VSTATUS_COMPARE_BACKPORCH: 279 case LCD_VSTATUS_COMPARE_ACTIVE: 280 case LCD_VSTATUS_COMPARE_FRONT_PORCH: 281 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_VERT_COMP); 282 break; 283 } 284 } 285 if (status & LCD_INT_DMA_ERR) { 286 val = 287 (status & LCD_INT_DMA_ERR & 288 kmb_read_lcd(kmb, LCD_INT_ENABLE)); 289 /* LAYER0 - VL0 */ 290 if (val & (LAYER0_DMA_FIFO_UNDERFLOW | 291 LAYER0_DMA_CB_FIFO_UNDERFLOW | 292 LAYER0_DMA_CR_FIFO_UNDERFLOW)) { 293 kmb->kmb_under_flow++; 294 drm_info(&kmb->drm, 295 "!LAYER0:VL0 DMA UNDERFLOW val = 0x%lx,under_flow=%d", 296 val, kmb->kmb_under_flow); 297 /* disable underflow interrupt */ 298 kmb_clr_bitmask_lcd(kmb, LCD_INT_ENABLE, 299 LAYER0_DMA_FIFO_UNDERFLOW | 300 LAYER0_DMA_CB_FIFO_UNDERFLOW | 301 LAYER0_DMA_CR_FIFO_UNDERFLOW); 302 kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, 303 LAYER0_DMA_CB_FIFO_UNDERFLOW | 304 LAYER0_DMA_FIFO_UNDERFLOW | 305 LAYER0_DMA_CR_FIFO_UNDERFLOW); 306 /* disable auto restart mode */ 307 kmb_clr_bitmask_lcd(kmb, LCD_LAYERn_DMA_CFG(0), 308 LCD_DMA_LAYER_CONT_PING_PONG_UPDATE); 309 310 kmb->layer_no = 0; 311 } 312 313 if (val & LAYER0_DMA_FIFO_OVERFLOW) 314 drm_dbg(&kmb->drm, 315 "LAYER0:VL0 DMA OVERFLOW val = 0x%lx", val); 316 if (val & LAYER0_DMA_CB_FIFO_OVERFLOW) 317 drm_dbg(&kmb->drm, 318 "LAYER0:VL0 DMA CB OVERFLOW val = 0x%lx", val); 319 if (val & LAYER0_DMA_CR_FIFO_OVERFLOW) 320 drm_dbg(&kmb->drm, 321 "LAYER0:VL0 DMA CR OVERFLOW val = 0x%lx", val); 322 323 /* LAYER1 - VL1 */ 324 if (val & (LAYER1_DMA_FIFO_UNDERFLOW | 325 LAYER1_DMA_CB_FIFO_UNDERFLOW | 326 LAYER1_DMA_CR_FIFO_UNDERFLOW)) { 327 kmb->kmb_under_flow++; 328 drm_info(&kmb->drm, 329 "!LAYER1:VL1 DMA UNDERFLOW val = 0x%lx, under_flow=%d", 330 val, kmb->kmb_under_flow); 331 /* disable underflow interrupt */ 332 kmb_clr_bitmask_lcd(kmb, LCD_INT_ENABLE, 333 LAYER1_DMA_FIFO_UNDERFLOW | 334 LAYER1_DMA_CB_FIFO_UNDERFLOW | 335 LAYER1_DMA_CR_FIFO_UNDERFLOW); 336 kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, 337 LAYER1_DMA_CB_FIFO_UNDERFLOW | 338 LAYER1_DMA_FIFO_UNDERFLOW | 339 LAYER1_DMA_CR_FIFO_UNDERFLOW); 340 /* disable auto restart mode */ 341 kmb_clr_bitmask_lcd(kmb, LCD_LAYERn_DMA_CFG(1), 342 LCD_DMA_LAYER_CONT_PING_PONG_UPDATE); 343 kmb->layer_no = 1; 344 } 345 346 /* LAYER1 - VL1 */ 347 if (val & LAYER1_DMA_FIFO_OVERFLOW) 348 drm_dbg(&kmb->drm, 349 "LAYER1:VL1 DMA OVERFLOW val = 0x%lx", val); 350 if (val & LAYER1_DMA_CB_FIFO_OVERFLOW) 351 drm_dbg(&kmb->drm, 352 "LAYER1:VL1 DMA CB OVERFLOW val = 0x%lx", val); 353 if (val & LAYER1_DMA_CR_FIFO_OVERFLOW) 354 drm_dbg(&kmb->drm, 355 "LAYER1:VL1 DMA CR OVERFLOW val = 0x%lx", val); 356 357 /* LAYER2 - GL0 */ 358 if (val & LAYER2_DMA_FIFO_UNDERFLOW) 359 drm_dbg(&kmb->drm, 360 "LAYER2:GL0 DMA UNDERFLOW val = 0x%lx", val); 361 if (val & LAYER2_DMA_FIFO_OVERFLOW) 362 drm_dbg(&kmb->drm, 363 "LAYER2:GL0 DMA OVERFLOW val = 0x%lx", val); 364 365 /* LAYER3 - GL1 */ 366 if (val & LAYER3_DMA_FIFO_UNDERFLOW) 367 drm_dbg(&kmb->drm, 368 "LAYER3:GL1 DMA UNDERFLOW val = 0x%lx", val); 369 if (val & LAYER3_DMA_FIFO_UNDERFLOW) 370 drm_dbg(&kmb->drm, 371 "LAYER3:GL1 DMA OVERFLOW val = 0x%lx", val); 372 } 373 374 spin_unlock(&kmb->irq_lock); 375 376 if (status & LCD_INT_LAYER) { 377 /* Clear layer interrupts */ 378 kmb_write_lcd(kmb, LCD_INT_CLEAR, LCD_INT_LAYER); 379 } 380 381 /* Clear all interrupts */ 382 kmb_set_bitmask_lcd(kmb, LCD_INT_CLEAR, 1); 383 return IRQ_HANDLED; 384 } 385 386 /* IRQ handler */ 387 static irqreturn_t kmb_isr(int irq, void *arg) 388 { 389 struct drm_device *dev = (struct drm_device *)arg; 390 391 handle_lcd_irq(dev); 392 return IRQ_HANDLED; 393 } 394 395 static void kmb_irq_reset(struct drm_device *drm) 396 { 397 kmb_write_lcd(to_kmb(drm), LCD_INT_CLEAR, 0xFFFF); 398 kmb_write_lcd(to_kmb(drm), LCD_INT_ENABLE, 0); 399 } 400 401 DEFINE_DRM_GEM_CMA_FOPS(fops); 402 403 static struct drm_driver kmb_driver = { 404 .driver_features = DRIVER_GEM | 405 DRIVER_MODESET | DRIVER_ATOMIC, 406 .irq_handler = kmb_isr, 407 .irq_preinstall = kmb_irq_reset, 408 .irq_uninstall = kmb_irq_reset, 409 /* GEM Operations */ 410 .fops = &fops, 411 DRM_GEM_CMA_DRIVER_OPS_VMAP, 412 .name = "kmb-drm", 413 .desc = "KEEMBAY DISPLAY DRIVER ", 414 .date = "20201008", 415 .major = 1, 416 .minor = 0, 417 }; 418 419 static int kmb_remove(struct platform_device *pdev) 420 { 421 struct device *dev = &pdev->dev; 422 struct drm_device *drm = dev_get_drvdata(dev); 423 struct kmb_drm_private *kmb = to_kmb(drm); 424 425 drm_dev_unregister(drm); 426 drm_kms_helper_poll_fini(drm); 427 of_node_put(kmb->crtc.port); 428 kmb->crtc.port = NULL; 429 pm_runtime_get_sync(drm->dev); 430 drm_irq_uninstall(drm); 431 pm_runtime_put_sync(drm->dev); 432 pm_runtime_disable(drm->dev); 433 434 of_reserved_mem_device_release(drm->dev); 435 436 /* Release clks */ 437 kmb_display_clk_disable(kmb); 438 439 dev_set_drvdata(dev, NULL); 440 441 /* Unregister DSI host */ 442 kmb_dsi_host_unregister(kmb->kmb_dsi); 443 drm_atomic_helper_shutdown(drm); 444 return 0; 445 } 446 447 static int kmb_probe(struct platform_device *pdev) 448 { 449 struct device *dev = get_device(&pdev->dev); 450 struct kmb_drm_private *kmb; 451 int ret = 0; 452 struct device_node *dsi_in; 453 struct device_node *dsi_node; 454 struct platform_device *dsi_pdev; 455 456 /* The bridge (ADV 7535) will return -EPROBE_DEFER until it 457 * has a mipi_dsi_host to register its device to. So, we 458 * first register the DSI host during probe time, and then return 459 * -EPROBE_DEFER until the bridge is loaded. Probe will be called again 460 * and then the rest of the driver initialization can proceed 461 * afterwards and the bridge can be successfully attached. 462 */ 463 dsi_in = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); 464 if (!dsi_in) { 465 DRM_ERROR("Failed to get dsi_in node info from DT"); 466 return -EINVAL; 467 } 468 dsi_node = of_graph_get_remote_port_parent(dsi_in); 469 if (!dsi_node) { 470 of_node_put(dsi_in); 471 DRM_ERROR("Failed to get dsi node from DT\n"); 472 return -EINVAL; 473 } 474 475 dsi_pdev = of_find_device_by_node(dsi_node); 476 if (!dsi_pdev) { 477 of_node_put(dsi_in); 478 of_node_put(dsi_node); 479 DRM_ERROR("Failed to get dsi platform device\n"); 480 return -EINVAL; 481 } 482 483 of_node_put(dsi_in); 484 of_node_put(dsi_node); 485 ret = kmb_dsi_host_bridge_init(get_device(&dsi_pdev->dev)); 486 487 if (ret == -EPROBE_DEFER) { 488 return -EPROBE_DEFER; 489 } else if (ret) { 490 DRM_ERROR("probe failed to initialize DSI host bridge\n"); 491 return ret; 492 } 493 494 /* Create DRM device */ 495 kmb = devm_drm_dev_alloc(dev, &kmb_driver, 496 struct kmb_drm_private, drm); 497 if (IS_ERR(kmb)) 498 return PTR_ERR(kmb); 499 500 dev_set_drvdata(dev, &kmb->drm); 501 502 /* Initialize MIPI DSI */ 503 kmb->kmb_dsi = kmb_dsi_init(dsi_pdev); 504 if (IS_ERR(kmb->kmb_dsi)) { 505 drm_err(&kmb->drm, "failed to initialize DSI\n"); 506 ret = PTR_ERR(kmb->kmb_dsi); 507 goto err_free1; 508 } 509 510 kmb->kmb_dsi->dev = &dsi_pdev->dev; 511 kmb->kmb_dsi->pdev = dsi_pdev; 512 ret = kmb_hw_init(&kmb->drm, 0); 513 if (ret) 514 goto err_free1; 515 516 ret = kmb_setup_mode_config(&kmb->drm); 517 if (ret) 518 goto err_free; 519 520 ret = drm_irq_install(&kmb->drm, kmb->irq_lcd); 521 if (ret < 0) { 522 drm_err(&kmb->drm, "failed to install IRQ handler\n"); 523 goto err_irq; 524 } 525 526 drm_kms_helper_poll_init(&kmb->drm); 527 528 /* Register graphics device with the kernel */ 529 ret = drm_dev_register(&kmb->drm, 0); 530 if (ret) 531 goto err_register; 532 533 return 0; 534 535 err_register: 536 drm_kms_helper_poll_fini(&kmb->drm); 537 err_irq: 538 pm_runtime_disable(kmb->drm.dev); 539 err_free: 540 drm_crtc_cleanup(&kmb->crtc); 541 drm_mode_config_cleanup(&kmb->drm); 542 err_free1: 543 dev_set_drvdata(dev, NULL); 544 kmb_dsi_host_unregister(kmb->kmb_dsi); 545 546 return ret; 547 } 548 549 static const struct of_device_id kmb_of_match[] = { 550 {.compatible = "intel,keembay-display"}, 551 {}, 552 }; 553 554 MODULE_DEVICE_TABLE(of, kmb_of_match); 555 556 static int __maybe_unused kmb_pm_suspend(struct device *dev) 557 { 558 struct drm_device *drm = dev_get_drvdata(dev); 559 struct kmb_drm_private *kmb = drm ? to_kmb(drm) : NULL; 560 561 drm_kms_helper_poll_disable(drm); 562 563 kmb->state = drm_atomic_helper_suspend(drm); 564 if (IS_ERR(kmb->state)) { 565 drm_kms_helper_poll_enable(drm); 566 return PTR_ERR(kmb->state); 567 } 568 569 return 0; 570 } 571 572 static int __maybe_unused kmb_pm_resume(struct device *dev) 573 { 574 struct drm_device *drm = dev_get_drvdata(dev); 575 struct kmb_drm_private *kmb = drm ? to_kmb(drm) : NULL; 576 577 if (!kmb) 578 return 0; 579 580 drm_atomic_helper_resume(drm, kmb->state); 581 drm_kms_helper_poll_enable(drm); 582 583 return 0; 584 } 585 586 static SIMPLE_DEV_PM_OPS(kmb_pm_ops, kmb_pm_suspend, kmb_pm_resume); 587 588 static struct platform_driver kmb_platform_driver = { 589 .probe = kmb_probe, 590 .remove = kmb_remove, 591 .driver = { 592 .name = "kmb-drm", 593 .pm = &kmb_pm_ops, 594 .of_match_table = kmb_of_match, 595 }, 596 }; 597 598 module_platform_driver(kmb_platform_driver); 599 600 MODULE_AUTHOR("Intel Corporation"); 601 MODULE_DESCRIPTION("Keembay Display driver"); 602 MODULE_LICENSE("GPL v2"); 603