1 /* 2 * Copyright © 2014 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the 6 * "Software"), to deal in the Software without restriction, including 7 * without limitation the rights to use, copy, modify, merge, publish, 8 * distribute, sub license, and/or sell copies of the Software, and to 9 * permit persons to whom the Software is furnished to do so, subject to 10 * the following conditions: 11 * 12 * The above copyright notice and this permission notice (including the 13 * next paragraph) shall be included in all copies or substantial portions 14 * of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 21 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 22 * IN THE SOFTWARE. 23 */ 24 25 #include "i915_drv.h" 26 27 struct i915_params i915 __read_mostly = { 28 .modeset = -1, 29 .panel_ignore_lid = 1, 30 .semaphores = -1, 31 .lvds_channel_mode = 0, 32 .panel_use_ssc = -1, 33 .vbt_sdvo_panel_type = -1, 34 .enable_rc6 = -1, 35 .enable_fbc = -1, 36 .enable_execlists = -1, 37 .enable_hangcheck = true, 38 .enable_ppgtt = -1, 39 .enable_psr = 0, 40 .preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT), 41 .disable_power_well = 1, 42 .enable_ips = 1, 43 .fastboot = 0, 44 .prefault_disable = 0, 45 .load_detect_test = 0, 46 .reset = true, 47 .invert_brightness = 0, 48 .disable_display = 0, 49 .enable_cmd_parser = 1, 50 .disable_vtd_wa = 0, 51 .use_mmio_flip = 0, 52 .mmio_debug = 0, 53 .verbose_state_checks = 1, 54 .edp_vswing = 0, 55 .enable_guc_submission = false, 56 .guc_log_level = -1, 57 }; 58 59 module_param_named(modeset, i915.modeset, int, 0400); 60 MODULE_PARM_DESC(modeset, 61 "Use kernel modesetting [KMS] (0=disable, " 62 "1=on, -1=force vga console preference [default])"); 63 64 module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600); 65 MODULE_PARM_DESC(panel_ignore_lid, 66 "Override lid status (0=autodetect, 1=autodetect disabled [default], " 67 "-1=force lid closed, -2=force lid open)"); 68 69 module_param_named_unsafe(semaphores, i915.semaphores, int, 0400); 70 MODULE_PARM_DESC(semaphores, 71 "Use semaphores for inter-ring sync " 72 "(default: -1 (use per-chip defaults))"); 73 74 module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400); 75 MODULE_PARM_DESC(enable_rc6, 76 "Enable power-saving render C-state 6. " 77 "Different stages can be selected via bitmask values " 78 "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). " 79 "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. " 80 "default: -1 (use per-chip default)"); 81 82 module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600); 83 MODULE_PARM_DESC(enable_fbc, 84 "Enable frame buffer compression for power savings " 85 "(default: -1 (use per-chip default))"); 86 87 module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600); 88 MODULE_PARM_DESC(lvds_channel_mode, 89 "Specify LVDS channel mode " 90 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)"); 91 92 module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600); 93 MODULE_PARM_DESC(lvds_use_ssc, 94 "Use Spread Spectrum Clock with panels [LVDS/eDP] " 95 "(default: auto from VBT)"); 96 97 module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600); 98 MODULE_PARM_DESC(vbt_sdvo_panel_type, 99 "Override/Ignore selection of SDVO panel mode in the VBT " 100 "(-2=ignore, -1=auto [default], index in VBT BIOS table)"); 101 102 module_param_named_unsafe(reset, i915.reset, bool, 0600); 103 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)"); 104 105 module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644); 106 MODULE_PARM_DESC(enable_hangcheck, 107 "Periodically check GPU activity for detecting hangs. " 108 "WARNING: Disabling this can cause system wide hangs. " 109 "(default: true)"); 110 111 module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400); 112 MODULE_PARM_DESC(enable_ppgtt, 113 "Override PPGTT usage. " 114 "(-1=auto [default], 0=disabled, 1=aliasing, 2=full)"); 115 116 module_param_named(enable_execlists, i915.enable_execlists, int, 0400); 117 MODULE_PARM_DESC(enable_execlists, 118 "Override execlists usage. " 119 "(-1=auto [default], 0=disabled, 1=enabled)"); 120 121 module_param_named(enable_psr, i915.enable_psr, int, 0600); 122 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)"); 123 124 module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600); 125 MODULE_PARM_DESC(preliminary_hw_support, 126 "Enable preliminary hardware support."); 127 128 module_param_named(disable_power_well, i915.disable_power_well, int, 0600); 129 MODULE_PARM_DESC(disable_power_well, 130 "Disable the power well when possible (default: true)"); 131 132 module_param_named(enable_ips, i915.enable_ips, int, 0600); 133 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)"); 134 135 module_param_named(fastboot, i915.fastboot, bool, 0600); 136 MODULE_PARM_DESC(fastboot, 137 "Try to skip unnecessary mode sets at boot time (default: false)"); 138 139 module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600); 140 MODULE_PARM_DESC(prefault_disable, 141 "Disable page prefaulting for pread/pwrite/reloc (default:false). " 142 "For developers only."); 143 144 module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600); 145 MODULE_PARM_DESC(load_detect_test, 146 "Force-enable the VGA load detect code for testing (default:false). " 147 "For developers only."); 148 149 module_param_named(invert_brightness, i915.invert_brightness, int, 0600); 150 MODULE_PARM_DESC(invert_brightness, 151 "Invert backlight brightness " 152 "(-1 force normal, 0 machine defaults, 1 force inversion), please " 153 "report PCI device ID, subsystem vendor and subsystem device ID " 154 "to dri-devel@lists.freedesktop.org, if your machine needs it. " 155 "It will then be included in an upcoming module version."); 156 157 module_param_named(disable_display, i915.disable_display, bool, 0600); 158 MODULE_PARM_DESC(disable_display, "Disable display (default: false)"); 159 160 module_param_named(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600); 161 MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)"); 162 163 module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600); 164 MODULE_PARM_DESC(enable_cmd_parser, 165 "Enable command parsing (1=enabled [default], 0=disabled)"); 166 167 module_param_named(use_mmio_flip, i915.use_mmio_flip, int, 0600); 168 MODULE_PARM_DESC(use_mmio_flip, 169 "use MMIO flips (-1=never, 0=driver discretion [default], 1=always)"); 170 171 module_param_named(mmio_debug, i915.mmio_debug, int, 0600); 172 MODULE_PARM_DESC(mmio_debug, 173 "Enable the MMIO debug code for the first N failures (default: off). " 174 "This may negatively affect performance."); 175 176 module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600); 177 MODULE_PARM_DESC(verbose_state_checks, 178 "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions."); 179 180 /* WA to get away with the default setting in VBT for early platforms.Will be removed */ 181 module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400); 182 MODULE_PARM_DESC(edp_vswing, 183 "Ignore/Override vswing pre-emph table selection from VBT " 184 "(0=use value from vbt [default], 1=low power swing(200mV)," 185 "2=default swing(400mV))"); 186 187 module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, bool, 0400); 188 MODULE_PARM_DESC(enable_guc_submission, "Enable GuC submission (default:false)"); 189 190 module_param_named(guc_log_level, i915.guc_log_level, int, 0400); 191 MODULE_PARM_DESC(guc_log_level, 192 "GuC firmware logging level (-1:disabled (default), 0-3:enabled)"); 193