1 // SPDX-License-Identifier: MIT
2 /*
3  * Copyright © 2022 Intel Corporation
4  */
5 
6 #include <drm/drm_blend.h>
7 
8 #include "intel_atomic.h"
9 #include "intel_atomic_plane.h"
10 #include "intel_bw.h"
11 #include "intel_de.h"
12 #include "intel_display.h"
13 #include "intel_display_power.h"
14 #include "intel_display_types.h"
15 #include "intel_fb.h"
16 #include "skl_watermark.h"
17 
18 #include "i915_drv.h"
19 #include "i915_fixed.h"
20 #include "i915_reg.h"
21 #include "intel_pcode.h"
22 #include "intel_pm.h"
23 
24 static void skl_sagv_disable(struct drm_i915_private *i915);
25 
26 /* Stores plane specific WM parameters */
27 struct skl_wm_params {
28 	bool x_tiled, y_tiled;
29 	bool rc_surface;
30 	bool is_planar;
31 	u32 width;
32 	u8 cpp;
33 	u32 plane_pixel_rate;
34 	u32 y_min_scanlines;
35 	u32 plane_bytes_per_line;
36 	uint_fixed_16_16_t plane_blocks_per_line;
37 	uint_fixed_16_16_t y_tile_minimum;
38 	u32 linetime_us;
39 	u32 dbuf_block_size;
40 };
41 
42 u8 intel_enabled_dbuf_slices_mask(struct drm_i915_private *i915)
43 {
44 	u8 enabled_slices = 0;
45 	enum dbuf_slice slice;
46 
47 	for_each_dbuf_slice(i915, slice) {
48 		if (intel_de_read(i915, DBUF_CTL_S(slice)) & DBUF_POWER_STATE)
49 			enabled_slices |= BIT(slice);
50 	}
51 
52 	return enabled_slices;
53 }
54 
55 /*
56  * FIXME: We still don't have the proper code detect if we need to apply the WA,
57  * so assume we'll always need it in order to avoid underruns.
58  */
59 static bool skl_needs_memory_bw_wa(struct drm_i915_private *i915)
60 {
61 	return DISPLAY_VER(i915) == 9;
62 }
63 
64 static bool
65 intel_has_sagv(struct drm_i915_private *i915)
66 {
67 	return DISPLAY_VER(i915) >= 9 && !IS_LP(i915) &&
68 		i915->display.sagv.status != I915_SAGV_NOT_CONTROLLED;
69 }
70 
71 static u32
72 intel_sagv_block_time(struct drm_i915_private *i915)
73 {
74 	if (DISPLAY_VER(i915) >= 14) {
75 		u32 val;
76 
77 		val = intel_de_read(i915, MTL_LATENCY_SAGV);
78 
79 		return REG_FIELD_GET(MTL_LATENCY_QCLK_SAGV, val);
80 	} else if (DISPLAY_VER(i915) >= 12) {
81 		u32 val = 0;
82 		int ret;
83 
84 		ret = snb_pcode_read(&i915->uncore,
85 				     GEN12_PCODE_READ_SAGV_BLOCK_TIME_US,
86 				     &val, NULL);
87 		if (ret) {
88 			drm_dbg_kms(&i915->drm, "Couldn't read SAGV block time!\n");
89 			return 0;
90 		}
91 
92 		return val;
93 	} else if (DISPLAY_VER(i915) == 11) {
94 		return 10;
95 	} else if (DISPLAY_VER(i915) == 9 && !IS_LP(i915)) {
96 		return 30;
97 	} else {
98 		return 0;
99 	}
100 }
101 
102 static void intel_sagv_init(struct drm_i915_private *i915)
103 {
104 	if (!intel_has_sagv(i915))
105 		i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED;
106 
107 	/*
108 	 * Probe to see if we have working SAGV control.
109 	 * For icl+ this was already determined by intel_bw_init_hw().
110 	 */
111 	if (DISPLAY_VER(i915) < 11)
112 		skl_sagv_disable(i915);
113 
114 	drm_WARN_ON(&i915->drm, i915->display.sagv.status == I915_SAGV_UNKNOWN);
115 
116 	i915->display.sagv.block_time_us = intel_sagv_block_time(i915);
117 
118 	drm_dbg_kms(&i915->drm, "SAGV supported: %s, original SAGV block time: %u us\n",
119 		    str_yes_no(intel_has_sagv(i915)), i915->display.sagv.block_time_us);
120 
121 	/* avoid overflow when adding with wm0 latency/etc. */
122 	if (drm_WARN(&i915->drm, i915->display.sagv.block_time_us > U16_MAX,
123 		     "Excessive SAGV block time %u, ignoring\n",
124 		     i915->display.sagv.block_time_us))
125 		i915->display.sagv.block_time_us = 0;
126 
127 	if (!intel_has_sagv(i915))
128 		i915->display.sagv.block_time_us = 0;
129 }
130 
131 /*
132  * SAGV dynamically adjusts the system agent voltage and clock frequencies
133  * depending on power and performance requirements. The display engine access
134  * to system memory is blocked during the adjustment time. Because of the
135  * blocking time, having this enabled can cause full system hangs and/or pipe
136  * underruns if we don't meet all of the following requirements:
137  *
138  *  - <= 1 pipe enabled
139  *  - All planes can enable watermarks for latencies >= SAGV engine block time
140  *  - We're not using an interlaced display configuration
141  */
142 static void skl_sagv_enable(struct drm_i915_private *i915)
143 {
144 	int ret;
145 
146 	if (!intel_has_sagv(i915))
147 		return;
148 
149 	if (i915->display.sagv.status == I915_SAGV_ENABLED)
150 		return;
151 
152 	drm_dbg_kms(&i915->drm, "Enabling SAGV\n");
153 	ret = snb_pcode_write(&i915->uncore, GEN9_PCODE_SAGV_CONTROL,
154 			      GEN9_SAGV_ENABLE);
155 
156 	/* We don't need to wait for SAGV when enabling */
157 
158 	/*
159 	 * Some skl systems, pre-release machines in particular,
160 	 * don't actually have SAGV.
161 	 */
162 	if (IS_SKYLAKE(i915) && ret == -ENXIO) {
163 		drm_dbg(&i915->drm, "No SAGV found on system, ignoring\n");
164 		i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED;
165 		return;
166 	} else if (ret < 0) {
167 		drm_err(&i915->drm, "Failed to enable SAGV\n");
168 		return;
169 	}
170 
171 	i915->display.sagv.status = I915_SAGV_ENABLED;
172 }
173 
174 static void skl_sagv_disable(struct drm_i915_private *i915)
175 {
176 	int ret;
177 
178 	if (!intel_has_sagv(i915))
179 		return;
180 
181 	if (i915->display.sagv.status == I915_SAGV_DISABLED)
182 		return;
183 
184 	drm_dbg_kms(&i915->drm, "Disabling SAGV\n");
185 	/* bspec says to keep retrying for at least 1 ms */
186 	ret = skl_pcode_request(&i915->uncore, GEN9_PCODE_SAGV_CONTROL,
187 				GEN9_SAGV_DISABLE,
188 				GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED,
189 				1);
190 	/*
191 	 * Some skl systems, pre-release machines in particular,
192 	 * don't actually have SAGV.
193 	 */
194 	if (IS_SKYLAKE(i915) && ret == -ENXIO) {
195 		drm_dbg(&i915->drm, "No SAGV found on system, ignoring\n");
196 		i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED;
197 		return;
198 	} else if (ret < 0) {
199 		drm_err(&i915->drm, "Failed to disable SAGV (%d)\n", ret);
200 		return;
201 	}
202 
203 	i915->display.sagv.status = I915_SAGV_DISABLED;
204 }
205 
206 static void skl_sagv_pre_plane_update(struct intel_atomic_state *state)
207 {
208 	struct drm_i915_private *i915 = to_i915(state->base.dev);
209 	const struct intel_bw_state *new_bw_state =
210 		intel_atomic_get_new_bw_state(state);
211 
212 	if (!new_bw_state)
213 		return;
214 
215 	if (!intel_can_enable_sagv(i915, new_bw_state))
216 		skl_sagv_disable(i915);
217 }
218 
219 static void skl_sagv_post_plane_update(struct intel_atomic_state *state)
220 {
221 	struct drm_i915_private *i915 = to_i915(state->base.dev);
222 	const struct intel_bw_state *new_bw_state =
223 		intel_atomic_get_new_bw_state(state);
224 
225 	if (!new_bw_state)
226 		return;
227 
228 	if (intel_can_enable_sagv(i915, new_bw_state))
229 		skl_sagv_enable(i915);
230 }
231 
232 static void icl_sagv_pre_plane_update(struct intel_atomic_state *state)
233 {
234 	struct drm_i915_private *i915 = to_i915(state->base.dev);
235 	const struct intel_bw_state *old_bw_state =
236 		intel_atomic_get_old_bw_state(state);
237 	const struct intel_bw_state *new_bw_state =
238 		intel_atomic_get_new_bw_state(state);
239 	u16 old_mask, new_mask;
240 
241 	if (!new_bw_state)
242 		return;
243 
244 	old_mask = old_bw_state->qgv_points_mask;
245 	new_mask = old_bw_state->qgv_points_mask | new_bw_state->qgv_points_mask;
246 
247 	if (old_mask == new_mask)
248 		return;
249 
250 	WARN_ON(!new_bw_state->base.changed);
251 
252 	drm_dbg_kms(&i915->drm, "Restricting QGV points: 0x%x -> 0x%x\n",
253 		    old_mask, new_mask);
254 
255 	/*
256 	 * Restrict required qgv points before updating the configuration.
257 	 * According to BSpec we can't mask and unmask qgv points at the same
258 	 * time. Also masking should be done before updating the configuration
259 	 * and unmasking afterwards.
260 	 */
261 	icl_pcode_restrict_qgv_points(i915, new_mask);
262 }
263 
264 static void icl_sagv_post_plane_update(struct intel_atomic_state *state)
265 {
266 	struct drm_i915_private *i915 = to_i915(state->base.dev);
267 	const struct intel_bw_state *old_bw_state =
268 		intel_atomic_get_old_bw_state(state);
269 	const struct intel_bw_state *new_bw_state =
270 		intel_atomic_get_new_bw_state(state);
271 	u16 old_mask, new_mask;
272 
273 	if (!new_bw_state)
274 		return;
275 
276 	old_mask = old_bw_state->qgv_points_mask | new_bw_state->qgv_points_mask;
277 	new_mask = new_bw_state->qgv_points_mask;
278 
279 	if (old_mask == new_mask)
280 		return;
281 
282 	WARN_ON(!new_bw_state->base.changed);
283 
284 	drm_dbg_kms(&i915->drm, "Relaxing QGV points: 0x%x -> 0x%x\n",
285 		    old_mask, new_mask);
286 
287 	/*
288 	 * Allow required qgv points after updating the configuration.
289 	 * According to BSpec we can't mask and unmask qgv points at the same
290 	 * time. Also masking should be done before updating the configuration
291 	 * and unmasking afterwards.
292 	 */
293 	icl_pcode_restrict_qgv_points(i915, new_mask);
294 }
295 
296 void intel_sagv_pre_plane_update(struct intel_atomic_state *state)
297 {
298 	struct drm_i915_private *i915 = to_i915(state->base.dev);
299 
300 	/*
301 	 * Just return if we can't control SAGV or don't have it.
302 	 * This is different from situation when we have SAGV but just can't
303 	 * afford it due to DBuf limitation - in case if SAGV is completely
304 	 * disabled in a BIOS, we are not even allowed to send a PCode request,
305 	 * as it will throw an error. So have to check it here.
306 	 */
307 	if (!intel_has_sagv(i915))
308 		return;
309 
310 	if (DISPLAY_VER(i915) >= 11)
311 		icl_sagv_pre_plane_update(state);
312 	else
313 		skl_sagv_pre_plane_update(state);
314 }
315 
316 void intel_sagv_post_plane_update(struct intel_atomic_state *state)
317 {
318 	struct drm_i915_private *i915 = to_i915(state->base.dev);
319 
320 	/*
321 	 * Just return if we can't control SAGV or don't have it.
322 	 * This is different from situation when we have SAGV but just can't
323 	 * afford it due to DBuf limitation - in case if SAGV is completely
324 	 * disabled in a BIOS, we are not even allowed to send a PCode request,
325 	 * as it will throw an error. So have to check it here.
326 	 */
327 	if (!intel_has_sagv(i915))
328 		return;
329 
330 	if (DISPLAY_VER(i915) >= 11)
331 		icl_sagv_post_plane_update(state);
332 	else
333 		skl_sagv_post_plane_update(state);
334 }
335 
336 static bool skl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
337 {
338 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
339 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
340 	enum plane_id plane_id;
341 	int max_level = INT_MAX;
342 
343 	if (!intel_has_sagv(i915))
344 		return false;
345 
346 	if (!crtc_state->hw.active)
347 		return true;
348 
349 	if (crtc_state->hw.pipe_mode.flags & DRM_MODE_FLAG_INTERLACE)
350 		return false;
351 
352 	for_each_plane_id_on_crtc(crtc, plane_id) {
353 		const struct skl_plane_wm *wm =
354 			&crtc_state->wm.skl.optimal.planes[plane_id];
355 		int level;
356 
357 		/* Skip this plane if it's not enabled */
358 		if (!wm->wm[0].enable)
359 			continue;
360 
361 		/* Find the highest enabled wm level for this plane */
362 		for (level = ilk_wm_max_level(i915);
363 		     !wm->wm[level].enable; --level)
364 		     { }
365 
366 		/* Highest common enabled wm level for all planes */
367 		max_level = min(level, max_level);
368 	}
369 
370 	/* No enabled planes? */
371 	if (max_level == INT_MAX)
372 		return true;
373 
374 	for_each_plane_id_on_crtc(crtc, plane_id) {
375 		const struct skl_plane_wm *wm =
376 			&crtc_state->wm.skl.optimal.planes[plane_id];
377 
378 		/*
379 		 * All enabled planes must have enabled a common wm level that
380 		 * can tolerate memory latencies higher than sagv_block_time_us
381 		 */
382 		if (wm->wm[0].enable && !wm->wm[max_level].can_sagv)
383 			return false;
384 	}
385 
386 	return true;
387 }
388 
389 static bool tgl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
390 {
391 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
392 	enum plane_id plane_id;
393 
394 	if (!crtc_state->hw.active)
395 		return true;
396 
397 	for_each_plane_id_on_crtc(crtc, plane_id) {
398 		const struct skl_plane_wm *wm =
399 			&crtc_state->wm.skl.optimal.planes[plane_id];
400 
401 		if (wm->wm[0].enable && !wm->sagv.wm0.enable)
402 			return false;
403 	}
404 
405 	return true;
406 }
407 
408 static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
409 {
410 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
411 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
412 
413 	if (DISPLAY_VER(i915) >= 12)
414 		return tgl_crtc_can_enable_sagv(crtc_state);
415 	else
416 		return skl_crtc_can_enable_sagv(crtc_state);
417 }
418 
419 bool intel_can_enable_sagv(struct drm_i915_private *i915,
420 			   const struct intel_bw_state *bw_state)
421 {
422 	if (DISPLAY_VER(i915) < 11 &&
423 	    bw_state->active_pipes && !is_power_of_2(bw_state->active_pipes))
424 		return false;
425 
426 	return bw_state->pipe_sagv_reject == 0;
427 }
428 
429 static int intel_compute_sagv_mask(struct intel_atomic_state *state)
430 {
431 	struct drm_i915_private *i915 = to_i915(state->base.dev);
432 	int ret;
433 	struct intel_crtc *crtc;
434 	struct intel_crtc_state *new_crtc_state;
435 	struct intel_bw_state *new_bw_state = NULL;
436 	const struct intel_bw_state *old_bw_state = NULL;
437 	int i;
438 
439 	for_each_new_intel_crtc_in_state(state, crtc,
440 					 new_crtc_state, i) {
441 		new_bw_state = intel_atomic_get_bw_state(state);
442 		if (IS_ERR(new_bw_state))
443 			return PTR_ERR(new_bw_state);
444 
445 		old_bw_state = intel_atomic_get_old_bw_state(state);
446 
447 		if (intel_crtc_can_enable_sagv(new_crtc_state))
448 			new_bw_state->pipe_sagv_reject &= ~BIT(crtc->pipe);
449 		else
450 			new_bw_state->pipe_sagv_reject |= BIT(crtc->pipe);
451 	}
452 
453 	if (!new_bw_state)
454 		return 0;
455 
456 	new_bw_state->active_pipes =
457 		intel_calc_active_pipes(state, old_bw_state->active_pipes);
458 
459 	if (new_bw_state->active_pipes != old_bw_state->active_pipes) {
460 		ret = intel_atomic_lock_global_state(&new_bw_state->base);
461 		if (ret)
462 			return ret;
463 	}
464 
465 	if (intel_can_enable_sagv(i915, new_bw_state) !=
466 	    intel_can_enable_sagv(i915, old_bw_state)) {
467 		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
468 		if (ret)
469 			return ret;
470 	} else if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) {
471 		ret = intel_atomic_lock_global_state(&new_bw_state->base);
472 		if (ret)
473 			return ret;
474 	}
475 
476 	for_each_new_intel_crtc_in_state(state, crtc,
477 					 new_crtc_state, i) {
478 		struct skl_pipe_wm *pipe_wm = &new_crtc_state->wm.skl.optimal;
479 
480 		/*
481 		 * We store use_sagv_wm in the crtc state rather than relying on
482 		 * that bw state since we have no convenient way to get at the
483 		 * latter from the plane commit hooks (especially in the legacy
484 		 * cursor case)
485 		 */
486 		pipe_wm->use_sagv_wm = !HAS_HW_SAGV_WM(i915) &&
487 			DISPLAY_VER(i915) >= 12 &&
488 			intel_can_enable_sagv(i915, new_bw_state);
489 	}
490 
491 	return 0;
492 }
493 
494 static u16 skl_ddb_entry_init(struct skl_ddb_entry *entry,
495 			      u16 start, u16 end)
496 {
497 	entry->start = start;
498 	entry->end = end;
499 
500 	return end;
501 }
502 
503 static int intel_dbuf_slice_size(struct drm_i915_private *i915)
504 {
505 	return INTEL_INFO(i915)->display.dbuf.size /
506 		hweight8(INTEL_INFO(i915)->display.dbuf.slice_mask);
507 }
508 
509 static void
510 skl_ddb_entry_for_slices(struct drm_i915_private *i915, u8 slice_mask,
511 			 struct skl_ddb_entry *ddb)
512 {
513 	int slice_size = intel_dbuf_slice_size(i915);
514 
515 	if (!slice_mask) {
516 		ddb->start = 0;
517 		ddb->end = 0;
518 		return;
519 	}
520 
521 	ddb->start = (ffs(slice_mask) - 1) * slice_size;
522 	ddb->end = fls(slice_mask) * slice_size;
523 
524 	WARN_ON(ddb->start >= ddb->end);
525 	WARN_ON(ddb->end > INTEL_INFO(i915)->display.dbuf.size);
526 }
527 
528 static unsigned int mbus_ddb_offset(struct drm_i915_private *i915, u8 slice_mask)
529 {
530 	struct skl_ddb_entry ddb;
531 
532 	if (slice_mask & (BIT(DBUF_S1) | BIT(DBUF_S2)))
533 		slice_mask = BIT(DBUF_S1);
534 	else if (slice_mask & (BIT(DBUF_S3) | BIT(DBUF_S4)))
535 		slice_mask = BIT(DBUF_S3);
536 
537 	skl_ddb_entry_for_slices(i915, slice_mask, &ddb);
538 
539 	return ddb.start;
540 }
541 
542 u32 skl_ddb_dbuf_slice_mask(struct drm_i915_private *i915,
543 			    const struct skl_ddb_entry *entry)
544 {
545 	int slice_size = intel_dbuf_slice_size(i915);
546 	enum dbuf_slice start_slice, end_slice;
547 	u8 slice_mask = 0;
548 
549 	if (!skl_ddb_entry_size(entry))
550 		return 0;
551 
552 	start_slice = entry->start / slice_size;
553 	end_slice = (entry->end - 1) / slice_size;
554 
555 	/*
556 	 * Per plane DDB entry can in a really worst case be on multiple slices
557 	 * but single entry is anyway contigious.
558 	 */
559 	while (start_slice <= end_slice) {
560 		slice_mask |= BIT(start_slice);
561 		start_slice++;
562 	}
563 
564 	return slice_mask;
565 }
566 
567 static unsigned int intel_crtc_ddb_weight(const struct intel_crtc_state *crtc_state)
568 {
569 	const struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode;
570 	int hdisplay, vdisplay;
571 
572 	if (!crtc_state->hw.active)
573 		return 0;
574 
575 	/*
576 	 * Watermark/ddb requirement highly depends upon width of the
577 	 * framebuffer, So instead of allocating DDB equally among pipes
578 	 * distribute DDB based on resolution/width of the display.
579 	 */
580 	drm_mode_get_hv_timing(pipe_mode, &hdisplay, &vdisplay);
581 
582 	return hdisplay;
583 }
584 
585 static void intel_crtc_dbuf_weights(const struct intel_dbuf_state *dbuf_state,
586 				    enum pipe for_pipe,
587 				    unsigned int *weight_start,
588 				    unsigned int *weight_end,
589 				    unsigned int *weight_total)
590 {
591 	struct drm_i915_private *i915 =
592 		to_i915(dbuf_state->base.state->base.dev);
593 	enum pipe pipe;
594 
595 	*weight_start = 0;
596 	*weight_end = 0;
597 	*weight_total = 0;
598 
599 	for_each_pipe(i915, pipe) {
600 		int weight = dbuf_state->weight[pipe];
601 
602 		/*
603 		 * Do not account pipes using other slice sets
604 		 * luckily as of current BSpec slice sets do not partially
605 		 * intersect(pipes share either same one slice or same slice set
606 		 * i.e no partial intersection), so it is enough to check for
607 		 * equality for now.
608 		 */
609 		if (dbuf_state->slices[pipe] != dbuf_state->slices[for_pipe])
610 			continue;
611 
612 		*weight_total += weight;
613 		if (pipe < for_pipe) {
614 			*weight_start += weight;
615 			*weight_end += weight;
616 		} else if (pipe == for_pipe) {
617 			*weight_end += weight;
618 		}
619 	}
620 }
621 
622 static int
623 skl_crtc_allocate_ddb(struct intel_atomic_state *state, struct intel_crtc *crtc)
624 {
625 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
626 	unsigned int weight_total, weight_start, weight_end;
627 	const struct intel_dbuf_state *old_dbuf_state =
628 		intel_atomic_get_old_dbuf_state(state);
629 	struct intel_dbuf_state *new_dbuf_state =
630 		intel_atomic_get_new_dbuf_state(state);
631 	struct intel_crtc_state *crtc_state;
632 	struct skl_ddb_entry ddb_slices;
633 	enum pipe pipe = crtc->pipe;
634 	unsigned int mbus_offset = 0;
635 	u32 ddb_range_size;
636 	u32 dbuf_slice_mask;
637 	u32 start, end;
638 	int ret;
639 
640 	if (new_dbuf_state->weight[pipe] == 0) {
641 		skl_ddb_entry_init(&new_dbuf_state->ddb[pipe], 0, 0);
642 		goto out;
643 	}
644 
645 	dbuf_slice_mask = new_dbuf_state->slices[pipe];
646 
647 	skl_ddb_entry_for_slices(i915, dbuf_slice_mask, &ddb_slices);
648 	mbus_offset = mbus_ddb_offset(i915, dbuf_slice_mask);
649 	ddb_range_size = skl_ddb_entry_size(&ddb_slices);
650 
651 	intel_crtc_dbuf_weights(new_dbuf_state, pipe,
652 				&weight_start, &weight_end, &weight_total);
653 
654 	start = ddb_range_size * weight_start / weight_total;
655 	end = ddb_range_size * weight_end / weight_total;
656 
657 	skl_ddb_entry_init(&new_dbuf_state->ddb[pipe],
658 			   ddb_slices.start - mbus_offset + start,
659 			   ddb_slices.start - mbus_offset + end);
660 
661 out:
662 	if (old_dbuf_state->slices[pipe] == new_dbuf_state->slices[pipe] &&
663 	    skl_ddb_entry_equal(&old_dbuf_state->ddb[pipe],
664 				&new_dbuf_state->ddb[pipe]))
665 		return 0;
666 
667 	ret = intel_atomic_lock_global_state(&new_dbuf_state->base);
668 	if (ret)
669 		return ret;
670 
671 	crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
672 	if (IS_ERR(crtc_state))
673 		return PTR_ERR(crtc_state);
674 
675 	/*
676 	 * Used for checking overlaps, so we need absolute
677 	 * offsets instead of MBUS relative offsets.
678 	 */
679 	crtc_state->wm.skl.ddb.start = mbus_offset + new_dbuf_state->ddb[pipe].start;
680 	crtc_state->wm.skl.ddb.end = mbus_offset + new_dbuf_state->ddb[pipe].end;
681 
682 	drm_dbg_kms(&i915->drm,
683 		    "[CRTC:%d:%s] dbuf slices 0x%x -> 0x%x, ddb (%d - %d) -> (%d - %d), active pipes 0x%x -> 0x%x\n",
684 		    crtc->base.base.id, crtc->base.name,
685 		    old_dbuf_state->slices[pipe], new_dbuf_state->slices[pipe],
686 		    old_dbuf_state->ddb[pipe].start, old_dbuf_state->ddb[pipe].end,
687 		    new_dbuf_state->ddb[pipe].start, new_dbuf_state->ddb[pipe].end,
688 		    old_dbuf_state->active_pipes, new_dbuf_state->active_pipes);
689 
690 	return 0;
691 }
692 
693 static int skl_compute_wm_params(const struct intel_crtc_state *crtc_state,
694 				 int width, const struct drm_format_info *format,
695 				 u64 modifier, unsigned int rotation,
696 				 u32 plane_pixel_rate, struct skl_wm_params *wp,
697 				 int color_plane);
698 
699 static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
700 				 struct intel_plane *plane,
701 				 int level,
702 				 unsigned int latency,
703 				 const struct skl_wm_params *wp,
704 				 const struct skl_wm_level *result_prev,
705 				 struct skl_wm_level *result /* out */);
706 
707 static unsigned int
708 skl_cursor_allocation(const struct intel_crtc_state *crtc_state,
709 		      int num_active)
710 {
711 	struct intel_plane *plane = to_intel_plane(crtc_state->uapi.crtc->cursor);
712 	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
713 	int level, max_level = ilk_wm_max_level(i915);
714 	struct skl_wm_level wm = {};
715 	int ret, min_ddb_alloc = 0;
716 	struct skl_wm_params wp;
717 
718 	ret = skl_compute_wm_params(crtc_state, 256,
719 				    drm_format_info(DRM_FORMAT_ARGB8888),
720 				    DRM_FORMAT_MOD_LINEAR,
721 				    DRM_MODE_ROTATE_0,
722 				    crtc_state->pixel_rate, &wp, 0);
723 	drm_WARN_ON(&i915->drm, ret);
724 
725 	for (level = 0; level <= max_level; level++) {
726 		unsigned int latency = i915->display.wm.skl_latency[level];
727 
728 		skl_compute_plane_wm(crtc_state, plane, level, latency, &wp, &wm, &wm);
729 		if (wm.min_ddb_alloc == U16_MAX)
730 			break;
731 
732 		min_ddb_alloc = wm.min_ddb_alloc;
733 	}
734 
735 	return max(num_active == 1 ? 32 : 8, min_ddb_alloc);
736 }
737 
738 static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
739 {
740 	skl_ddb_entry_init(entry,
741 			   REG_FIELD_GET(PLANE_BUF_START_MASK, reg),
742 			   REG_FIELD_GET(PLANE_BUF_END_MASK, reg));
743 	if (entry->end)
744 		entry->end++;
745 }
746 
747 static void
748 skl_ddb_get_hw_plane_state(struct drm_i915_private *i915,
749 			   const enum pipe pipe,
750 			   const enum plane_id plane_id,
751 			   struct skl_ddb_entry *ddb,
752 			   struct skl_ddb_entry *ddb_y)
753 {
754 	u32 val;
755 
756 	/* Cursor doesn't support NV12/planar, so no extra calculation needed */
757 	if (plane_id == PLANE_CURSOR) {
758 		val = intel_de_read(i915, CUR_BUF_CFG(pipe));
759 		skl_ddb_entry_init_from_hw(ddb, val);
760 		return;
761 	}
762 
763 	val = intel_de_read(i915, PLANE_BUF_CFG(pipe, plane_id));
764 	skl_ddb_entry_init_from_hw(ddb, val);
765 
766 	if (DISPLAY_VER(i915) >= 11)
767 		return;
768 
769 	val = intel_de_read(i915, PLANE_NV12_BUF_CFG(pipe, plane_id));
770 	skl_ddb_entry_init_from_hw(ddb_y, val);
771 }
772 
773 static void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
774 				      struct skl_ddb_entry *ddb,
775 				      struct skl_ddb_entry *ddb_y)
776 {
777 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
778 	enum intel_display_power_domain power_domain;
779 	enum pipe pipe = crtc->pipe;
780 	intel_wakeref_t wakeref;
781 	enum plane_id plane_id;
782 
783 	power_domain = POWER_DOMAIN_PIPE(pipe);
784 	wakeref = intel_display_power_get_if_enabled(i915, power_domain);
785 	if (!wakeref)
786 		return;
787 
788 	for_each_plane_id_on_crtc(crtc, plane_id)
789 		skl_ddb_get_hw_plane_state(i915, pipe,
790 					   plane_id,
791 					   &ddb[plane_id],
792 					   &ddb_y[plane_id]);
793 
794 	intel_display_power_put(i915, power_domain, wakeref);
795 }
796 
797 struct dbuf_slice_conf_entry {
798 	u8 active_pipes;
799 	u8 dbuf_mask[I915_MAX_PIPES];
800 	bool join_mbus;
801 };
802 
803 /*
804  * Table taken from Bspec 12716
805  * Pipes do have some preferred DBuf slice affinity,
806  * plus there are some hardcoded requirements on how
807  * those should be distributed for multipipe scenarios.
808  * For more DBuf slices algorithm can get even more messy
809  * and less readable, so decided to use a table almost
810  * as is from BSpec itself - that way it is at least easier
811  * to compare, change and check.
812  */
813 static const struct dbuf_slice_conf_entry icl_allowed_dbufs[] =
814 /* Autogenerated with igt/tools/intel_dbuf_map tool: */
815 {
816 	{
817 		.active_pipes = BIT(PIPE_A),
818 		.dbuf_mask = {
819 			[PIPE_A] = BIT(DBUF_S1),
820 		},
821 	},
822 	{
823 		.active_pipes = BIT(PIPE_B),
824 		.dbuf_mask = {
825 			[PIPE_B] = BIT(DBUF_S1),
826 		},
827 	},
828 	{
829 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
830 		.dbuf_mask = {
831 			[PIPE_A] = BIT(DBUF_S1),
832 			[PIPE_B] = BIT(DBUF_S2),
833 		},
834 	},
835 	{
836 		.active_pipes = BIT(PIPE_C),
837 		.dbuf_mask = {
838 			[PIPE_C] = BIT(DBUF_S2),
839 		},
840 	},
841 	{
842 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C),
843 		.dbuf_mask = {
844 			[PIPE_A] = BIT(DBUF_S1),
845 			[PIPE_C] = BIT(DBUF_S2),
846 		},
847 	},
848 	{
849 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C),
850 		.dbuf_mask = {
851 			[PIPE_B] = BIT(DBUF_S1),
852 			[PIPE_C] = BIT(DBUF_S2),
853 		},
854 	},
855 	{
856 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
857 		.dbuf_mask = {
858 			[PIPE_A] = BIT(DBUF_S1),
859 			[PIPE_B] = BIT(DBUF_S1),
860 			[PIPE_C] = BIT(DBUF_S2),
861 		},
862 	},
863 	{}
864 };
865 
866 /*
867  * Table taken from Bspec 49255
868  * Pipes do have some preferred DBuf slice affinity,
869  * plus there are some hardcoded requirements on how
870  * those should be distributed for multipipe scenarios.
871  * For more DBuf slices algorithm can get even more messy
872  * and less readable, so decided to use a table almost
873  * as is from BSpec itself - that way it is at least easier
874  * to compare, change and check.
875  */
876 static const struct dbuf_slice_conf_entry tgl_allowed_dbufs[] =
877 /* Autogenerated with igt/tools/intel_dbuf_map tool: */
878 {
879 	{
880 		.active_pipes = BIT(PIPE_A),
881 		.dbuf_mask = {
882 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
883 		},
884 	},
885 	{
886 		.active_pipes = BIT(PIPE_B),
887 		.dbuf_mask = {
888 			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
889 		},
890 	},
891 	{
892 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
893 		.dbuf_mask = {
894 			[PIPE_A] = BIT(DBUF_S2),
895 			[PIPE_B] = BIT(DBUF_S1),
896 		},
897 	},
898 	{
899 		.active_pipes = BIT(PIPE_C),
900 		.dbuf_mask = {
901 			[PIPE_C] = BIT(DBUF_S2) | BIT(DBUF_S1),
902 		},
903 	},
904 	{
905 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C),
906 		.dbuf_mask = {
907 			[PIPE_A] = BIT(DBUF_S1),
908 			[PIPE_C] = BIT(DBUF_S2),
909 		},
910 	},
911 	{
912 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C),
913 		.dbuf_mask = {
914 			[PIPE_B] = BIT(DBUF_S1),
915 			[PIPE_C] = BIT(DBUF_S2),
916 		},
917 	},
918 	{
919 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
920 		.dbuf_mask = {
921 			[PIPE_A] = BIT(DBUF_S1),
922 			[PIPE_B] = BIT(DBUF_S1),
923 			[PIPE_C] = BIT(DBUF_S2),
924 		},
925 	},
926 	{
927 		.active_pipes = BIT(PIPE_D),
928 		.dbuf_mask = {
929 			[PIPE_D] = BIT(DBUF_S2) | BIT(DBUF_S1),
930 		},
931 	},
932 	{
933 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_D),
934 		.dbuf_mask = {
935 			[PIPE_A] = BIT(DBUF_S1),
936 			[PIPE_D] = BIT(DBUF_S2),
937 		},
938 	},
939 	{
940 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_D),
941 		.dbuf_mask = {
942 			[PIPE_B] = BIT(DBUF_S1),
943 			[PIPE_D] = BIT(DBUF_S2),
944 		},
945 	},
946 	{
947 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D),
948 		.dbuf_mask = {
949 			[PIPE_A] = BIT(DBUF_S1),
950 			[PIPE_B] = BIT(DBUF_S1),
951 			[PIPE_D] = BIT(DBUF_S2),
952 		},
953 	},
954 	{
955 		.active_pipes = BIT(PIPE_C) | BIT(PIPE_D),
956 		.dbuf_mask = {
957 			[PIPE_C] = BIT(DBUF_S1),
958 			[PIPE_D] = BIT(DBUF_S2),
959 		},
960 	},
961 	{
962 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D),
963 		.dbuf_mask = {
964 			[PIPE_A] = BIT(DBUF_S1),
965 			[PIPE_C] = BIT(DBUF_S2),
966 			[PIPE_D] = BIT(DBUF_S2),
967 		},
968 	},
969 	{
970 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
971 		.dbuf_mask = {
972 			[PIPE_B] = BIT(DBUF_S1),
973 			[PIPE_C] = BIT(DBUF_S2),
974 			[PIPE_D] = BIT(DBUF_S2),
975 		},
976 	},
977 	{
978 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
979 		.dbuf_mask = {
980 			[PIPE_A] = BIT(DBUF_S1),
981 			[PIPE_B] = BIT(DBUF_S1),
982 			[PIPE_C] = BIT(DBUF_S2),
983 			[PIPE_D] = BIT(DBUF_S2),
984 		},
985 	},
986 	{}
987 };
988 
989 static const struct dbuf_slice_conf_entry dg2_allowed_dbufs[] = {
990 	{
991 		.active_pipes = BIT(PIPE_A),
992 		.dbuf_mask = {
993 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
994 		},
995 	},
996 	{
997 		.active_pipes = BIT(PIPE_B),
998 		.dbuf_mask = {
999 			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
1000 		},
1001 	},
1002 	{
1003 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
1004 		.dbuf_mask = {
1005 			[PIPE_A] = BIT(DBUF_S1),
1006 			[PIPE_B] = BIT(DBUF_S2),
1007 		},
1008 	},
1009 	{
1010 		.active_pipes = BIT(PIPE_C),
1011 		.dbuf_mask = {
1012 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1013 		},
1014 	},
1015 	{
1016 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C),
1017 		.dbuf_mask = {
1018 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1019 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1020 		},
1021 	},
1022 	{
1023 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C),
1024 		.dbuf_mask = {
1025 			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
1026 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1027 		},
1028 	},
1029 	{
1030 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
1031 		.dbuf_mask = {
1032 			[PIPE_A] = BIT(DBUF_S1),
1033 			[PIPE_B] = BIT(DBUF_S2),
1034 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1035 		},
1036 	},
1037 	{
1038 		.active_pipes = BIT(PIPE_D),
1039 		.dbuf_mask = {
1040 			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
1041 		},
1042 	},
1043 	{
1044 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_D),
1045 		.dbuf_mask = {
1046 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1047 			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
1048 		},
1049 	},
1050 	{
1051 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_D),
1052 		.dbuf_mask = {
1053 			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
1054 			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
1055 		},
1056 	},
1057 	{
1058 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D),
1059 		.dbuf_mask = {
1060 			[PIPE_A] = BIT(DBUF_S1),
1061 			[PIPE_B] = BIT(DBUF_S2),
1062 			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
1063 		},
1064 	},
1065 	{
1066 		.active_pipes = BIT(PIPE_C) | BIT(PIPE_D),
1067 		.dbuf_mask = {
1068 			[PIPE_C] = BIT(DBUF_S3),
1069 			[PIPE_D] = BIT(DBUF_S4),
1070 		},
1071 	},
1072 	{
1073 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D),
1074 		.dbuf_mask = {
1075 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1076 			[PIPE_C] = BIT(DBUF_S3),
1077 			[PIPE_D] = BIT(DBUF_S4),
1078 		},
1079 	},
1080 	{
1081 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
1082 		.dbuf_mask = {
1083 			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
1084 			[PIPE_C] = BIT(DBUF_S3),
1085 			[PIPE_D] = BIT(DBUF_S4),
1086 		},
1087 	},
1088 	{
1089 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
1090 		.dbuf_mask = {
1091 			[PIPE_A] = BIT(DBUF_S1),
1092 			[PIPE_B] = BIT(DBUF_S2),
1093 			[PIPE_C] = BIT(DBUF_S3),
1094 			[PIPE_D] = BIT(DBUF_S4),
1095 		},
1096 	},
1097 	{}
1098 };
1099 
1100 static const struct dbuf_slice_conf_entry adlp_allowed_dbufs[] = {
1101 	/*
1102 	 * Keep the join_mbus cases first so check_mbus_joined()
1103 	 * will prefer them over the !join_mbus cases.
1104 	 */
1105 	{
1106 		.active_pipes = BIT(PIPE_A),
1107 		.dbuf_mask = {
1108 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2) | BIT(DBUF_S3) | BIT(DBUF_S4),
1109 		},
1110 		.join_mbus = true,
1111 	},
1112 	{
1113 		.active_pipes = BIT(PIPE_B),
1114 		.dbuf_mask = {
1115 			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2) | BIT(DBUF_S3) | BIT(DBUF_S4),
1116 		},
1117 		.join_mbus = true,
1118 	},
1119 	{
1120 		.active_pipes = BIT(PIPE_A),
1121 		.dbuf_mask = {
1122 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1123 		},
1124 		.join_mbus = false,
1125 	},
1126 	{
1127 		.active_pipes = BIT(PIPE_B),
1128 		.dbuf_mask = {
1129 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1130 		},
1131 		.join_mbus = false,
1132 	},
1133 	{
1134 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
1135 		.dbuf_mask = {
1136 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1137 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1138 		},
1139 	},
1140 	{
1141 		.active_pipes = BIT(PIPE_C),
1142 		.dbuf_mask = {
1143 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1144 		},
1145 	},
1146 	{
1147 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C),
1148 		.dbuf_mask = {
1149 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1150 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1151 		},
1152 	},
1153 	{
1154 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C),
1155 		.dbuf_mask = {
1156 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1157 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1158 		},
1159 	},
1160 	{
1161 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
1162 		.dbuf_mask = {
1163 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1164 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1165 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1166 		},
1167 	},
1168 	{
1169 		.active_pipes = BIT(PIPE_D),
1170 		.dbuf_mask = {
1171 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1172 		},
1173 	},
1174 	{
1175 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_D),
1176 		.dbuf_mask = {
1177 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1178 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1179 		},
1180 	},
1181 	{
1182 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_D),
1183 		.dbuf_mask = {
1184 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1185 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1186 		},
1187 	},
1188 	{
1189 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D),
1190 		.dbuf_mask = {
1191 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1192 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1193 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1194 		},
1195 	},
1196 	{
1197 		.active_pipes = BIT(PIPE_C) | BIT(PIPE_D),
1198 		.dbuf_mask = {
1199 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1200 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1201 		},
1202 	},
1203 	{
1204 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D),
1205 		.dbuf_mask = {
1206 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1207 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1208 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1209 		},
1210 	},
1211 	{
1212 		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
1213 		.dbuf_mask = {
1214 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1215 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1216 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1217 		},
1218 	},
1219 	{
1220 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
1221 		.dbuf_mask = {
1222 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
1223 			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
1224 			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
1225 			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
1226 		},
1227 	},
1228 	{}
1229 
1230 };
1231 
1232 static bool check_mbus_joined(u8 active_pipes,
1233 			      const struct dbuf_slice_conf_entry *dbuf_slices)
1234 {
1235 	int i;
1236 
1237 	for (i = 0; dbuf_slices[i].active_pipes != 0; i++) {
1238 		if (dbuf_slices[i].active_pipes == active_pipes)
1239 			return dbuf_slices[i].join_mbus;
1240 	}
1241 	return false;
1242 }
1243 
1244 static bool adlp_check_mbus_joined(u8 active_pipes)
1245 {
1246 	return check_mbus_joined(active_pipes, adlp_allowed_dbufs);
1247 }
1248 
1249 static u8 compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus,
1250 			      const struct dbuf_slice_conf_entry *dbuf_slices)
1251 {
1252 	int i;
1253 
1254 	for (i = 0; dbuf_slices[i].active_pipes != 0; i++) {
1255 		if (dbuf_slices[i].active_pipes == active_pipes &&
1256 		    dbuf_slices[i].join_mbus == join_mbus)
1257 			return dbuf_slices[i].dbuf_mask[pipe];
1258 	}
1259 	return 0;
1260 }
1261 
1262 /*
1263  * This function finds an entry with same enabled pipe configuration and
1264  * returns correspondent DBuf slice mask as stated in BSpec for particular
1265  * platform.
1266  */
1267 static u8 icl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
1268 {
1269 	/*
1270 	 * FIXME: For ICL this is still a bit unclear as prev BSpec revision
1271 	 * required calculating "pipe ratio" in order to determine
1272 	 * if one or two slices can be used for single pipe configurations
1273 	 * as additional constraint to the existing table.
1274 	 * However based on recent info, it should be not "pipe ratio"
1275 	 * but rather ratio between pixel_rate and cdclk with additional
1276 	 * constants, so for now we are using only table until this is
1277 	 * clarified. Also this is the reason why crtc_state param is
1278 	 * still here - we will need it once those additional constraints
1279 	 * pop up.
1280 	 */
1281 	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
1282 				   icl_allowed_dbufs);
1283 }
1284 
1285 static u8 tgl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
1286 {
1287 	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
1288 				   tgl_allowed_dbufs);
1289 }
1290 
1291 static u8 adlp_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
1292 {
1293 	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
1294 				   adlp_allowed_dbufs);
1295 }
1296 
1297 static u8 dg2_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
1298 {
1299 	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
1300 				   dg2_allowed_dbufs);
1301 }
1302 
1303 static u8 skl_compute_dbuf_slices(struct intel_crtc *crtc, u8 active_pipes, bool join_mbus)
1304 {
1305 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
1306 	enum pipe pipe = crtc->pipe;
1307 
1308 	if (IS_DG2(i915))
1309 		return dg2_compute_dbuf_slices(pipe, active_pipes, join_mbus);
1310 	else if (DISPLAY_VER(i915) >= 13)
1311 		return adlp_compute_dbuf_slices(pipe, active_pipes, join_mbus);
1312 	else if (DISPLAY_VER(i915) == 12)
1313 		return tgl_compute_dbuf_slices(pipe, active_pipes, join_mbus);
1314 	else if (DISPLAY_VER(i915) == 11)
1315 		return icl_compute_dbuf_slices(pipe, active_pipes, join_mbus);
1316 	/*
1317 	 * For anything else just return one slice yet.
1318 	 * Should be extended for other platforms.
1319 	 */
1320 	return active_pipes & BIT(pipe) ? BIT(DBUF_S1) : 0;
1321 }
1322 
1323 static bool
1324 use_minimal_wm0_only(const struct intel_crtc_state *crtc_state,
1325 		     struct intel_plane *plane)
1326 {
1327 	struct drm_i915_private *i915 = to_i915(plane->base.dev);
1328 
1329 	return DISPLAY_VER(i915) >= 13 &&
1330 	       crtc_state->uapi.async_flip &&
1331 	       plane->async_flip;
1332 }
1333 
1334 static u64
1335 skl_total_relative_data_rate(const struct intel_crtc_state *crtc_state)
1336 {
1337 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
1338 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
1339 	enum plane_id plane_id;
1340 	u64 data_rate = 0;
1341 
1342 	for_each_plane_id_on_crtc(crtc, plane_id) {
1343 		if (plane_id == PLANE_CURSOR)
1344 			continue;
1345 
1346 		data_rate += crtc_state->rel_data_rate[plane_id];
1347 
1348 		if (DISPLAY_VER(i915) < 11)
1349 			data_rate += crtc_state->rel_data_rate_y[plane_id];
1350 	}
1351 
1352 	return data_rate;
1353 }
1354 
1355 static const struct skl_wm_level *
1356 skl_plane_wm_level(const struct skl_pipe_wm *pipe_wm,
1357 		   enum plane_id plane_id,
1358 		   int level)
1359 {
1360 	const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
1361 
1362 	if (level == 0 && pipe_wm->use_sagv_wm)
1363 		return &wm->sagv.wm0;
1364 
1365 	return &wm->wm[level];
1366 }
1367 
1368 static const struct skl_wm_level *
1369 skl_plane_trans_wm(const struct skl_pipe_wm *pipe_wm,
1370 		   enum plane_id plane_id)
1371 {
1372 	const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
1373 
1374 	if (pipe_wm->use_sagv_wm)
1375 		return &wm->sagv.trans_wm;
1376 
1377 	return &wm->trans_wm;
1378 }
1379 
1380 /*
1381  * We only disable the watermarks for each plane if
1382  * they exceed the ddb allocation of said plane. This
1383  * is done so that we don't end up touching cursor
1384  * watermarks needlessly when some other plane reduces
1385  * our max possible watermark level.
1386  *
1387  * Bspec has this to say about the PLANE_WM enable bit:
1388  * "All the watermarks at this level for all enabled
1389  *  planes must be enabled before the level will be used."
1390  * So this is actually safe to do.
1391  */
1392 static void
1393 skl_check_wm_level(struct skl_wm_level *wm, const struct skl_ddb_entry *ddb)
1394 {
1395 	if (wm->min_ddb_alloc > skl_ddb_entry_size(ddb))
1396 		memset(wm, 0, sizeof(*wm));
1397 }
1398 
1399 static void
1400 skl_check_nv12_wm_level(struct skl_wm_level *wm, struct skl_wm_level *uv_wm,
1401 			const struct skl_ddb_entry *ddb_y, const struct skl_ddb_entry *ddb)
1402 {
1403 	if (wm->min_ddb_alloc > skl_ddb_entry_size(ddb_y) ||
1404 	    uv_wm->min_ddb_alloc > skl_ddb_entry_size(ddb)) {
1405 		memset(wm, 0, sizeof(*wm));
1406 		memset(uv_wm, 0, sizeof(*uv_wm));
1407 	}
1408 }
1409 
1410 static bool icl_need_wm1_wa(struct drm_i915_private *i915,
1411 			    enum plane_id plane_id)
1412 {
1413 	/*
1414 	 * Wa_1408961008:icl, ehl
1415 	 * Wa_14012656716:tgl, adl
1416 	 * Underruns with WM1+ disabled
1417 	 */
1418 	return DISPLAY_VER(i915) == 11 ||
1419 	       (IS_DISPLAY_VER(i915, 12, 13) && plane_id == PLANE_CURSOR);
1420 }
1421 
1422 struct skl_plane_ddb_iter {
1423 	u64 data_rate;
1424 	u16 start, size;
1425 };
1426 
1427 static void
1428 skl_allocate_plane_ddb(struct skl_plane_ddb_iter *iter,
1429 		       struct skl_ddb_entry *ddb,
1430 		       const struct skl_wm_level *wm,
1431 		       u64 data_rate)
1432 {
1433 	u16 size, extra = 0;
1434 
1435 	if (data_rate) {
1436 		extra = min_t(u16, iter->size,
1437 			      DIV64_U64_ROUND_UP(iter->size * data_rate,
1438 						 iter->data_rate));
1439 		iter->size -= extra;
1440 		iter->data_rate -= data_rate;
1441 	}
1442 
1443 	/*
1444 	 * Keep ddb entry of all disabled planes explicitly zeroed
1445 	 * to avoid skl_ddb_add_affected_planes() adding them to
1446 	 * the state when other planes change their allocations.
1447 	 */
1448 	size = wm->min_ddb_alloc + extra;
1449 	if (size)
1450 		iter->start = skl_ddb_entry_init(ddb, iter->start,
1451 						 iter->start + size);
1452 }
1453 
1454 static int
1455 skl_crtc_allocate_plane_ddb(struct intel_atomic_state *state,
1456 			    struct intel_crtc *crtc)
1457 {
1458 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
1459 	struct intel_crtc_state *crtc_state =
1460 		intel_atomic_get_new_crtc_state(state, crtc);
1461 	const struct intel_dbuf_state *dbuf_state =
1462 		intel_atomic_get_new_dbuf_state(state);
1463 	const struct skl_ddb_entry *alloc = &dbuf_state->ddb[crtc->pipe];
1464 	int num_active = hweight8(dbuf_state->active_pipes);
1465 	struct skl_plane_ddb_iter iter;
1466 	enum plane_id plane_id;
1467 	u16 cursor_size;
1468 	u32 blocks;
1469 	int level;
1470 
1471 	/* Clear the partitioning for disabled planes. */
1472 	memset(crtc_state->wm.skl.plane_ddb, 0, sizeof(crtc_state->wm.skl.plane_ddb));
1473 	memset(crtc_state->wm.skl.plane_ddb_y, 0, sizeof(crtc_state->wm.skl.plane_ddb_y));
1474 
1475 	if (!crtc_state->hw.active)
1476 		return 0;
1477 
1478 	iter.start = alloc->start;
1479 	iter.size = skl_ddb_entry_size(alloc);
1480 	if (iter.size == 0)
1481 		return 0;
1482 
1483 	/* Allocate fixed number of blocks for cursor. */
1484 	cursor_size = skl_cursor_allocation(crtc_state, num_active);
1485 	iter.size -= cursor_size;
1486 	skl_ddb_entry_init(&crtc_state->wm.skl.plane_ddb[PLANE_CURSOR],
1487 			   alloc->end - cursor_size, alloc->end);
1488 
1489 	iter.data_rate = skl_total_relative_data_rate(crtc_state);
1490 
1491 	/*
1492 	 * Find the highest watermark level for which we can satisfy the block
1493 	 * requirement of active planes.
1494 	 */
1495 	for (level = ilk_wm_max_level(i915); level >= 0; level--) {
1496 		blocks = 0;
1497 		for_each_plane_id_on_crtc(crtc, plane_id) {
1498 			const struct skl_plane_wm *wm =
1499 				&crtc_state->wm.skl.optimal.planes[plane_id];
1500 
1501 			if (plane_id == PLANE_CURSOR) {
1502 				const struct skl_ddb_entry *ddb =
1503 					&crtc_state->wm.skl.plane_ddb[plane_id];
1504 
1505 				if (wm->wm[level].min_ddb_alloc > skl_ddb_entry_size(ddb)) {
1506 					drm_WARN_ON(&i915->drm,
1507 						    wm->wm[level].min_ddb_alloc != U16_MAX);
1508 					blocks = U32_MAX;
1509 					break;
1510 				}
1511 				continue;
1512 			}
1513 
1514 			blocks += wm->wm[level].min_ddb_alloc;
1515 			blocks += wm->uv_wm[level].min_ddb_alloc;
1516 		}
1517 
1518 		if (blocks <= iter.size) {
1519 			iter.size -= blocks;
1520 			break;
1521 		}
1522 	}
1523 
1524 	if (level < 0) {
1525 		drm_dbg_kms(&i915->drm,
1526 			    "Requested display configuration exceeds system DDB limitations");
1527 		drm_dbg_kms(&i915->drm, "minimum required %d/%d\n",
1528 			    blocks, iter.size);
1529 		return -EINVAL;
1530 	}
1531 
1532 	/* avoid the WARN later when we don't allocate any extra DDB */
1533 	if (iter.data_rate == 0)
1534 		iter.size = 0;
1535 
1536 	/*
1537 	 * Grant each plane the blocks it requires at the highest achievable
1538 	 * watermark level, plus an extra share of the leftover blocks
1539 	 * proportional to its relative data rate.
1540 	 */
1541 	for_each_plane_id_on_crtc(crtc, plane_id) {
1542 		struct skl_ddb_entry *ddb =
1543 			&crtc_state->wm.skl.plane_ddb[plane_id];
1544 		struct skl_ddb_entry *ddb_y =
1545 			&crtc_state->wm.skl.plane_ddb_y[plane_id];
1546 		const struct skl_plane_wm *wm =
1547 			&crtc_state->wm.skl.optimal.planes[plane_id];
1548 
1549 		if (plane_id == PLANE_CURSOR)
1550 			continue;
1551 
1552 		if (DISPLAY_VER(i915) < 11 &&
1553 		    crtc_state->nv12_planes & BIT(plane_id)) {
1554 			skl_allocate_plane_ddb(&iter, ddb_y, &wm->wm[level],
1555 					       crtc_state->rel_data_rate_y[plane_id]);
1556 			skl_allocate_plane_ddb(&iter, ddb, &wm->uv_wm[level],
1557 					       crtc_state->rel_data_rate[plane_id]);
1558 		} else {
1559 			skl_allocate_plane_ddb(&iter, ddb, &wm->wm[level],
1560 					       crtc_state->rel_data_rate[plane_id]);
1561 		}
1562 	}
1563 	drm_WARN_ON(&i915->drm, iter.size != 0 || iter.data_rate != 0);
1564 
1565 	/*
1566 	 * When we calculated watermark values we didn't know how high
1567 	 * of a level we'd actually be able to hit, so we just marked
1568 	 * all levels as "enabled."  Go back now and disable the ones
1569 	 * that aren't actually possible.
1570 	 */
1571 	for (level++; level <= ilk_wm_max_level(i915); level++) {
1572 		for_each_plane_id_on_crtc(crtc, plane_id) {
1573 			const struct skl_ddb_entry *ddb =
1574 				&crtc_state->wm.skl.plane_ddb[plane_id];
1575 			const struct skl_ddb_entry *ddb_y =
1576 				&crtc_state->wm.skl.plane_ddb_y[plane_id];
1577 			struct skl_plane_wm *wm =
1578 				&crtc_state->wm.skl.optimal.planes[plane_id];
1579 
1580 			if (DISPLAY_VER(i915) < 11 &&
1581 			    crtc_state->nv12_planes & BIT(plane_id))
1582 				skl_check_nv12_wm_level(&wm->wm[level],
1583 							&wm->uv_wm[level],
1584 							ddb_y, ddb);
1585 			else
1586 				skl_check_wm_level(&wm->wm[level], ddb);
1587 
1588 			if (icl_need_wm1_wa(i915, plane_id) &&
1589 			    level == 1 && wm->wm[0].enable) {
1590 				wm->wm[level].blocks = wm->wm[0].blocks;
1591 				wm->wm[level].lines = wm->wm[0].lines;
1592 				wm->wm[level].ignore_lines = wm->wm[0].ignore_lines;
1593 			}
1594 		}
1595 	}
1596 
1597 	/*
1598 	 * Go back and disable the transition and SAGV watermarks
1599 	 * if it turns out we don't have enough DDB blocks for them.
1600 	 */
1601 	for_each_plane_id_on_crtc(crtc, plane_id) {
1602 		const struct skl_ddb_entry *ddb =
1603 			&crtc_state->wm.skl.plane_ddb[plane_id];
1604 		const struct skl_ddb_entry *ddb_y =
1605 			&crtc_state->wm.skl.plane_ddb_y[plane_id];
1606 		struct skl_plane_wm *wm =
1607 			&crtc_state->wm.skl.optimal.planes[plane_id];
1608 
1609 		if (DISPLAY_VER(i915) < 11 &&
1610 		    crtc_state->nv12_planes & BIT(plane_id)) {
1611 			skl_check_wm_level(&wm->trans_wm, ddb_y);
1612 		} else {
1613 			WARN_ON(skl_ddb_entry_size(ddb_y));
1614 
1615 			skl_check_wm_level(&wm->trans_wm, ddb);
1616 		}
1617 
1618 		skl_check_wm_level(&wm->sagv.wm0, ddb);
1619 		skl_check_wm_level(&wm->sagv.trans_wm, ddb);
1620 	}
1621 
1622 	return 0;
1623 }
1624 
1625 /*
1626  * The max latency should be 257 (max the punit can code is 255 and we add 2us
1627  * for the read latency) and cpp should always be <= 8, so that
1628  * should allow pixel_rate up to ~2 GHz which seems sufficient since max
1629  * 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
1630  */
1631 static uint_fixed_16_16_t
1632 skl_wm_method1(const struct drm_i915_private *i915, u32 pixel_rate,
1633 	       u8 cpp, u32 latency, u32 dbuf_block_size)
1634 {
1635 	u32 wm_intermediate_val;
1636 	uint_fixed_16_16_t ret;
1637 
1638 	if (latency == 0)
1639 		return FP_16_16_MAX;
1640 
1641 	wm_intermediate_val = latency * pixel_rate * cpp;
1642 	ret = div_fixed16(wm_intermediate_val, 1000 * dbuf_block_size);
1643 
1644 	if (DISPLAY_VER(i915) >= 10)
1645 		ret = add_fixed16_u32(ret, 1);
1646 
1647 	return ret;
1648 }
1649 
1650 static uint_fixed_16_16_t
1651 skl_wm_method2(u32 pixel_rate, u32 pipe_htotal, u32 latency,
1652 	       uint_fixed_16_16_t plane_blocks_per_line)
1653 {
1654 	u32 wm_intermediate_val;
1655 	uint_fixed_16_16_t ret;
1656 
1657 	if (latency == 0)
1658 		return FP_16_16_MAX;
1659 
1660 	wm_intermediate_val = latency * pixel_rate;
1661 	wm_intermediate_val = DIV_ROUND_UP(wm_intermediate_val,
1662 					   pipe_htotal * 1000);
1663 	ret = mul_u32_fixed16(wm_intermediate_val, plane_blocks_per_line);
1664 	return ret;
1665 }
1666 
1667 static uint_fixed_16_16_t
1668 intel_get_linetime_us(const struct intel_crtc_state *crtc_state)
1669 {
1670 	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
1671 	u32 pixel_rate;
1672 	u32 crtc_htotal;
1673 	uint_fixed_16_16_t linetime_us;
1674 
1675 	if (!crtc_state->hw.active)
1676 		return u32_to_fixed16(0);
1677 
1678 	pixel_rate = crtc_state->pixel_rate;
1679 
1680 	if (drm_WARN_ON(&i915->drm, pixel_rate == 0))
1681 		return u32_to_fixed16(0);
1682 
1683 	crtc_htotal = crtc_state->hw.pipe_mode.crtc_htotal;
1684 	linetime_us = div_fixed16(crtc_htotal * 1000, pixel_rate);
1685 
1686 	return linetime_us;
1687 }
1688 
1689 static int
1690 skl_compute_wm_params(const struct intel_crtc_state *crtc_state,
1691 		      int width, const struct drm_format_info *format,
1692 		      u64 modifier, unsigned int rotation,
1693 		      u32 plane_pixel_rate, struct skl_wm_params *wp,
1694 		      int color_plane)
1695 {
1696 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
1697 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
1698 	u32 interm_pbpl;
1699 
1700 	/* only planar format has two planes */
1701 	if (color_plane == 1 &&
1702 	    !intel_format_info_is_yuv_semiplanar(format, modifier)) {
1703 		drm_dbg_kms(&i915->drm,
1704 			    "Non planar format have single plane\n");
1705 		return -EINVAL;
1706 	}
1707 
1708 	wp->x_tiled = modifier == I915_FORMAT_MOD_X_TILED;
1709 	wp->y_tiled = modifier != I915_FORMAT_MOD_X_TILED &&
1710 		intel_fb_is_tiled_modifier(modifier);
1711 	wp->rc_surface = intel_fb_is_ccs_modifier(modifier);
1712 	wp->is_planar = intel_format_info_is_yuv_semiplanar(format, modifier);
1713 
1714 	wp->width = width;
1715 	if (color_plane == 1 && wp->is_planar)
1716 		wp->width /= 2;
1717 
1718 	wp->cpp = format->cpp[color_plane];
1719 	wp->plane_pixel_rate = plane_pixel_rate;
1720 
1721 	if (DISPLAY_VER(i915) >= 11 &&
1722 	    modifier == I915_FORMAT_MOD_Yf_TILED  && wp->cpp == 1)
1723 		wp->dbuf_block_size = 256;
1724 	else
1725 		wp->dbuf_block_size = 512;
1726 
1727 	if (drm_rotation_90_or_270(rotation)) {
1728 		switch (wp->cpp) {
1729 		case 1:
1730 			wp->y_min_scanlines = 16;
1731 			break;
1732 		case 2:
1733 			wp->y_min_scanlines = 8;
1734 			break;
1735 		case 4:
1736 			wp->y_min_scanlines = 4;
1737 			break;
1738 		default:
1739 			MISSING_CASE(wp->cpp);
1740 			return -EINVAL;
1741 		}
1742 	} else {
1743 		wp->y_min_scanlines = 4;
1744 	}
1745 
1746 	if (skl_needs_memory_bw_wa(i915))
1747 		wp->y_min_scanlines *= 2;
1748 
1749 	wp->plane_bytes_per_line = wp->width * wp->cpp;
1750 	if (wp->y_tiled) {
1751 		interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line *
1752 					   wp->y_min_scanlines,
1753 					   wp->dbuf_block_size);
1754 
1755 		if (DISPLAY_VER(i915) >= 10)
1756 			interm_pbpl++;
1757 
1758 		wp->plane_blocks_per_line = div_fixed16(interm_pbpl,
1759 							wp->y_min_scanlines);
1760 	} else {
1761 		interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line,
1762 					   wp->dbuf_block_size);
1763 
1764 		if (!wp->x_tiled || DISPLAY_VER(i915) >= 10)
1765 			interm_pbpl++;
1766 
1767 		wp->plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
1768 	}
1769 
1770 	wp->y_tile_minimum = mul_u32_fixed16(wp->y_min_scanlines,
1771 					     wp->plane_blocks_per_line);
1772 
1773 	wp->linetime_us = fixed16_to_u32_round_up(intel_get_linetime_us(crtc_state));
1774 
1775 	return 0;
1776 }
1777 
1778 static int
1779 skl_compute_plane_wm_params(const struct intel_crtc_state *crtc_state,
1780 			    const struct intel_plane_state *plane_state,
1781 			    struct skl_wm_params *wp, int color_plane)
1782 {
1783 	const struct drm_framebuffer *fb = plane_state->hw.fb;
1784 	int width;
1785 
1786 	/*
1787 	 * Src coordinates are already rotated by 270 degrees for
1788 	 * the 90/270 degree plane rotation cases (to match the
1789 	 * GTT mapping), hence no need to account for rotation here.
1790 	 */
1791 	width = drm_rect_width(&plane_state->uapi.src) >> 16;
1792 
1793 	return skl_compute_wm_params(crtc_state, width,
1794 				     fb->format, fb->modifier,
1795 				     plane_state->hw.rotation,
1796 				     intel_plane_pixel_rate(crtc_state, plane_state),
1797 				     wp, color_plane);
1798 }
1799 
1800 static bool skl_wm_has_lines(struct drm_i915_private *i915, int level)
1801 {
1802 	if (DISPLAY_VER(i915) >= 10)
1803 		return true;
1804 
1805 	/* The number of lines are ignored for the level 0 watermark. */
1806 	return level > 0;
1807 }
1808 
1809 static int skl_wm_max_lines(struct drm_i915_private *i915)
1810 {
1811 	if (DISPLAY_VER(i915) >= 13)
1812 		return 255;
1813 	else
1814 		return 31;
1815 }
1816 
1817 static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
1818 				 struct intel_plane *plane,
1819 				 int level,
1820 				 unsigned int latency,
1821 				 const struct skl_wm_params *wp,
1822 				 const struct skl_wm_level *result_prev,
1823 				 struct skl_wm_level *result /* out */)
1824 {
1825 	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
1826 	uint_fixed_16_16_t method1, method2;
1827 	uint_fixed_16_16_t selected_result;
1828 	u32 blocks, lines, min_ddb_alloc = 0;
1829 
1830 	if (latency == 0 ||
1831 	    (use_minimal_wm0_only(crtc_state, plane) && level > 0)) {
1832 		/* reject it */
1833 		result->min_ddb_alloc = U16_MAX;
1834 		return;
1835 	}
1836 
1837 	/*
1838 	 * WaIncreaseLatencyIPCEnabled: kbl,cfl
1839 	 * Display WA #1141: kbl,cfl
1840 	 */
1841 	if ((IS_KABYLAKE(i915) || IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) &&
1842 	    skl_watermark_ipc_enabled(i915))
1843 		latency += 4;
1844 
1845 	if (skl_needs_memory_bw_wa(i915) && wp->x_tiled)
1846 		latency += 15;
1847 
1848 	method1 = skl_wm_method1(i915, wp->plane_pixel_rate,
1849 				 wp->cpp, latency, wp->dbuf_block_size);
1850 	method2 = skl_wm_method2(wp->plane_pixel_rate,
1851 				 crtc_state->hw.pipe_mode.crtc_htotal,
1852 				 latency,
1853 				 wp->plane_blocks_per_line);
1854 
1855 	if (wp->y_tiled) {
1856 		selected_result = max_fixed16(method2, wp->y_tile_minimum);
1857 	} else {
1858 		if ((wp->cpp * crtc_state->hw.pipe_mode.crtc_htotal /
1859 		     wp->dbuf_block_size < 1) &&
1860 		     (wp->plane_bytes_per_line / wp->dbuf_block_size < 1)) {
1861 			selected_result = method2;
1862 		} else if (latency >= wp->linetime_us) {
1863 			if (DISPLAY_VER(i915) == 9)
1864 				selected_result = min_fixed16(method1, method2);
1865 			else
1866 				selected_result = method2;
1867 		} else {
1868 			selected_result = method1;
1869 		}
1870 	}
1871 
1872 	blocks = fixed16_to_u32_round_up(selected_result) + 1;
1873 	/*
1874 	 * Lets have blocks at minimum equivalent to plane_blocks_per_line
1875 	 * as there will be at minimum one line for lines configuration. This
1876 	 * is a work around for FIFO underruns observed with resolutions like
1877 	 * 4k 60 Hz in single channel DRAM configurations.
1878 	 *
1879 	 * As per the Bspec 49325, if the ddb allocation can hold at least
1880 	 * one plane_blocks_per_line, we should have selected method2 in
1881 	 * the above logic. Assuming that modern versions have enough dbuf
1882 	 * and method2 guarantees blocks equivalent to at least 1 line,
1883 	 * select the blocks as plane_blocks_per_line.
1884 	 *
1885 	 * TODO: Revisit the logic when we have better understanding on DRAM
1886 	 * channels' impact on the level 0 memory latency and the relevant
1887 	 * wm calculations.
1888 	 */
1889 	if (skl_wm_has_lines(i915, level))
1890 		blocks = max(blocks,
1891 			     fixed16_to_u32_round_up(wp->plane_blocks_per_line));
1892 	lines = div_round_up_fixed16(selected_result,
1893 				     wp->plane_blocks_per_line);
1894 
1895 	if (DISPLAY_VER(i915) == 9) {
1896 		/* Display WA #1125: skl,bxt,kbl */
1897 		if (level == 0 && wp->rc_surface)
1898 			blocks += fixed16_to_u32_round_up(wp->y_tile_minimum);
1899 
1900 		/* Display WA #1126: skl,bxt,kbl */
1901 		if (level >= 1 && level <= 7) {
1902 			if (wp->y_tiled) {
1903 				blocks += fixed16_to_u32_round_up(wp->y_tile_minimum);
1904 				lines += wp->y_min_scanlines;
1905 			} else {
1906 				blocks++;
1907 			}
1908 
1909 			/*
1910 			 * Make sure result blocks for higher latency levels are
1911 			 * at least as high as level below the current level.
1912 			 * Assumption in DDB algorithm optimization for special
1913 			 * cases. Also covers Display WA #1125 for RC.
1914 			 */
1915 			if (result_prev->blocks > blocks)
1916 				blocks = result_prev->blocks;
1917 		}
1918 	}
1919 
1920 	if (DISPLAY_VER(i915) >= 11) {
1921 		if (wp->y_tiled) {
1922 			int extra_lines;
1923 
1924 			if (lines % wp->y_min_scanlines == 0)
1925 				extra_lines = wp->y_min_scanlines;
1926 			else
1927 				extra_lines = wp->y_min_scanlines * 2 -
1928 					lines % wp->y_min_scanlines;
1929 
1930 			min_ddb_alloc = mul_round_up_u32_fixed16(lines + extra_lines,
1931 								 wp->plane_blocks_per_line);
1932 		} else {
1933 			min_ddb_alloc = blocks + DIV_ROUND_UP(blocks, 10);
1934 		}
1935 	}
1936 
1937 	if (!skl_wm_has_lines(i915, level))
1938 		lines = 0;
1939 
1940 	if (lines > skl_wm_max_lines(i915)) {
1941 		/* reject it */
1942 		result->min_ddb_alloc = U16_MAX;
1943 		return;
1944 	}
1945 
1946 	/*
1947 	 * If lines is valid, assume we can use this watermark level
1948 	 * for now.  We'll come back and disable it after we calculate the
1949 	 * DDB allocation if it turns out we don't actually have enough
1950 	 * blocks to satisfy it.
1951 	 */
1952 	result->blocks = blocks;
1953 	result->lines = lines;
1954 	/* Bspec says: value >= plane ddb allocation -> invalid, hence the +1 here */
1955 	result->min_ddb_alloc = max(min_ddb_alloc, blocks) + 1;
1956 	result->enable = true;
1957 
1958 	if (DISPLAY_VER(i915) < 12 && i915->display.sagv.block_time_us)
1959 		result->can_sagv = latency >= i915->display.sagv.block_time_us;
1960 }
1961 
1962 static void
1963 skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
1964 		      struct intel_plane *plane,
1965 		      const struct skl_wm_params *wm_params,
1966 		      struct skl_wm_level *levels)
1967 {
1968 	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
1969 	int level, max_level = ilk_wm_max_level(i915);
1970 	struct skl_wm_level *result_prev = &levels[0];
1971 
1972 	for (level = 0; level <= max_level; level++) {
1973 		struct skl_wm_level *result = &levels[level];
1974 		unsigned int latency = i915->display.wm.skl_latency[level];
1975 
1976 		skl_compute_plane_wm(crtc_state, plane, level, latency,
1977 				     wm_params, result_prev, result);
1978 
1979 		result_prev = result;
1980 	}
1981 }
1982 
1983 static void tgl_compute_sagv_wm(const struct intel_crtc_state *crtc_state,
1984 				struct intel_plane *plane,
1985 				const struct skl_wm_params *wm_params,
1986 				struct skl_plane_wm *plane_wm)
1987 {
1988 	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
1989 	struct skl_wm_level *sagv_wm = &plane_wm->sagv.wm0;
1990 	struct skl_wm_level *levels = plane_wm->wm;
1991 	unsigned int latency = 0;
1992 
1993 	if (i915->display.sagv.block_time_us)
1994 		latency = i915->display.sagv.block_time_us + i915->display.wm.skl_latency[0];
1995 
1996 	skl_compute_plane_wm(crtc_state, plane, 0, latency,
1997 			     wm_params, &levels[0],
1998 			     sagv_wm);
1999 }
2000 
2001 static void skl_compute_transition_wm(struct drm_i915_private *i915,
2002 				      struct skl_wm_level *trans_wm,
2003 				      const struct skl_wm_level *wm0,
2004 				      const struct skl_wm_params *wp)
2005 {
2006 	u16 trans_min, trans_amount, trans_y_tile_min;
2007 	u16 wm0_blocks, trans_offset, blocks;
2008 
2009 	/* Transition WM don't make any sense if ipc is disabled */
2010 	if (!skl_watermark_ipc_enabled(i915))
2011 		return;
2012 
2013 	/*
2014 	 * WaDisableTWM:skl,kbl,cfl,bxt
2015 	 * Transition WM are not recommended by HW team for GEN9
2016 	 */
2017 	if (DISPLAY_VER(i915) == 9)
2018 		return;
2019 
2020 	if (DISPLAY_VER(i915) >= 11)
2021 		trans_min = 4;
2022 	else
2023 		trans_min = 14;
2024 
2025 	/* Display WA #1140: glk,cnl */
2026 	if (DISPLAY_VER(i915) == 10)
2027 		trans_amount = 0;
2028 	else
2029 		trans_amount = 10; /* This is configurable amount */
2030 
2031 	trans_offset = trans_min + trans_amount;
2032 
2033 	/*
2034 	 * The spec asks for Selected Result Blocks for wm0 (the real value),
2035 	 * not Result Blocks (the integer value). Pay attention to the capital
2036 	 * letters. The value wm_l0->blocks is actually Result Blocks, but
2037 	 * since Result Blocks is the ceiling of Selected Result Blocks plus 1,
2038 	 * and since we later will have to get the ceiling of the sum in the
2039 	 * transition watermarks calculation, we can just pretend Selected
2040 	 * Result Blocks is Result Blocks minus 1 and it should work for the
2041 	 * current platforms.
2042 	 */
2043 	wm0_blocks = wm0->blocks - 1;
2044 
2045 	if (wp->y_tiled) {
2046 		trans_y_tile_min =
2047 			(u16)mul_round_up_u32_fixed16(2, wp->y_tile_minimum);
2048 		blocks = max(wm0_blocks, trans_y_tile_min) + trans_offset;
2049 	} else {
2050 		blocks = wm0_blocks + trans_offset;
2051 	}
2052 	blocks++;
2053 
2054 	/*
2055 	 * Just assume we can enable the transition watermark.  After
2056 	 * computing the DDB we'll come back and disable it if that
2057 	 * assumption turns out to be false.
2058 	 */
2059 	trans_wm->blocks = blocks;
2060 	trans_wm->min_ddb_alloc = max_t(u16, wm0->min_ddb_alloc, blocks + 1);
2061 	trans_wm->enable = true;
2062 }
2063 
2064 static int skl_build_plane_wm_single(struct intel_crtc_state *crtc_state,
2065 				     const struct intel_plane_state *plane_state,
2066 				     struct intel_plane *plane, int color_plane)
2067 {
2068 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
2069 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
2070 	struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane->id];
2071 	struct skl_wm_params wm_params;
2072 	int ret;
2073 
2074 	ret = skl_compute_plane_wm_params(crtc_state, plane_state,
2075 					  &wm_params, color_plane);
2076 	if (ret)
2077 		return ret;
2078 
2079 	skl_compute_wm_levels(crtc_state, plane, &wm_params, wm->wm);
2080 
2081 	skl_compute_transition_wm(i915, &wm->trans_wm,
2082 				  &wm->wm[0], &wm_params);
2083 
2084 	if (DISPLAY_VER(i915) >= 12) {
2085 		tgl_compute_sagv_wm(crtc_state, plane, &wm_params, wm);
2086 
2087 		skl_compute_transition_wm(i915, &wm->sagv.trans_wm,
2088 					  &wm->sagv.wm0, &wm_params);
2089 	}
2090 
2091 	return 0;
2092 }
2093 
2094 static int skl_build_plane_wm_uv(struct intel_crtc_state *crtc_state,
2095 				 const struct intel_plane_state *plane_state,
2096 				 struct intel_plane *plane)
2097 {
2098 	struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane->id];
2099 	struct skl_wm_params wm_params;
2100 	int ret;
2101 
2102 	wm->is_planar = true;
2103 
2104 	/* uv plane watermarks must also be validated for NV12/Planar */
2105 	ret = skl_compute_plane_wm_params(crtc_state, plane_state,
2106 					  &wm_params, 1);
2107 	if (ret)
2108 		return ret;
2109 
2110 	skl_compute_wm_levels(crtc_state, plane, &wm_params, wm->uv_wm);
2111 
2112 	return 0;
2113 }
2114 
2115 static int skl_build_plane_wm(struct intel_crtc_state *crtc_state,
2116 			      const struct intel_plane_state *plane_state)
2117 {
2118 	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
2119 	enum plane_id plane_id = plane->id;
2120 	struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane_id];
2121 	const struct drm_framebuffer *fb = plane_state->hw.fb;
2122 	int ret;
2123 
2124 	memset(wm, 0, sizeof(*wm));
2125 
2126 	if (!intel_wm_plane_visible(crtc_state, plane_state))
2127 		return 0;
2128 
2129 	ret = skl_build_plane_wm_single(crtc_state, plane_state,
2130 					plane, 0);
2131 	if (ret)
2132 		return ret;
2133 
2134 	if (fb->format->is_yuv && fb->format->num_planes > 1) {
2135 		ret = skl_build_plane_wm_uv(crtc_state, plane_state,
2136 					    plane);
2137 		if (ret)
2138 			return ret;
2139 	}
2140 
2141 	return 0;
2142 }
2143 
2144 static int icl_build_plane_wm(struct intel_crtc_state *crtc_state,
2145 			      const struct intel_plane_state *plane_state)
2146 {
2147 	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
2148 	struct drm_i915_private *i915 = to_i915(plane->base.dev);
2149 	enum plane_id plane_id = plane->id;
2150 	struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane_id];
2151 	int ret;
2152 
2153 	/* Watermarks calculated in master */
2154 	if (plane_state->planar_slave)
2155 		return 0;
2156 
2157 	memset(wm, 0, sizeof(*wm));
2158 
2159 	if (plane_state->planar_linked_plane) {
2160 		const struct drm_framebuffer *fb = plane_state->hw.fb;
2161 
2162 		drm_WARN_ON(&i915->drm,
2163 			    !intel_wm_plane_visible(crtc_state, plane_state));
2164 		drm_WARN_ON(&i915->drm, !fb->format->is_yuv ||
2165 			    fb->format->num_planes == 1);
2166 
2167 		ret = skl_build_plane_wm_single(crtc_state, plane_state,
2168 						plane_state->planar_linked_plane, 0);
2169 		if (ret)
2170 			return ret;
2171 
2172 		ret = skl_build_plane_wm_single(crtc_state, plane_state,
2173 						plane, 1);
2174 		if (ret)
2175 			return ret;
2176 	} else if (intel_wm_plane_visible(crtc_state, plane_state)) {
2177 		ret = skl_build_plane_wm_single(crtc_state, plane_state,
2178 						plane, 0);
2179 		if (ret)
2180 			return ret;
2181 	}
2182 
2183 	return 0;
2184 }
2185 
2186 static int skl_build_pipe_wm(struct intel_atomic_state *state,
2187 			     struct intel_crtc *crtc)
2188 {
2189 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
2190 	struct intel_crtc_state *crtc_state =
2191 		intel_atomic_get_new_crtc_state(state, crtc);
2192 	const struct intel_plane_state *plane_state;
2193 	struct intel_plane *plane;
2194 	int ret, i;
2195 
2196 	for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
2197 		/*
2198 		 * FIXME should perhaps check {old,new}_plane_crtc->hw.crtc
2199 		 * instead but we don't populate that correctly for NV12 Y
2200 		 * planes so for now hack this.
2201 		 */
2202 		if (plane->pipe != crtc->pipe)
2203 			continue;
2204 
2205 		if (DISPLAY_VER(i915) >= 11)
2206 			ret = icl_build_plane_wm(crtc_state, plane_state);
2207 		else
2208 			ret = skl_build_plane_wm(crtc_state, plane_state);
2209 		if (ret)
2210 			return ret;
2211 	}
2212 
2213 	crtc_state->wm.skl.optimal = crtc_state->wm.skl.raw;
2214 
2215 	return 0;
2216 }
2217 
2218 static void skl_ddb_entry_write(struct drm_i915_private *i915,
2219 				i915_reg_t reg,
2220 				const struct skl_ddb_entry *entry)
2221 {
2222 	if (entry->end)
2223 		intel_de_write_fw(i915, reg,
2224 				  PLANE_BUF_END(entry->end - 1) |
2225 				  PLANE_BUF_START(entry->start));
2226 	else
2227 		intel_de_write_fw(i915, reg, 0);
2228 }
2229 
2230 static void skl_write_wm_level(struct drm_i915_private *i915,
2231 			       i915_reg_t reg,
2232 			       const struct skl_wm_level *level)
2233 {
2234 	u32 val = 0;
2235 
2236 	if (level->enable)
2237 		val |= PLANE_WM_EN;
2238 	if (level->ignore_lines)
2239 		val |= PLANE_WM_IGNORE_LINES;
2240 	val |= REG_FIELD_PREP(PLANE_WM_BLOCKS_MASK, level->blocks);
2241 	val |= REG_FIELD_PREP(PLANE_WM_LINES_MASK, level->lines);
2242 
2243 	intel_de_write_fw(i915, reg, val);
2244 }
2245 
2246 void skl_write_plane_wm(struct intel_plane *plane,
2247 			const struct intel_crtc_state *crtc_state)
2248 {
2249 	struct drm_i915_private *i915 = to_i915(plane->base.dev);
2250 	int level, max_level = ilk_wm_max_level(i915);
2251 	enum plane_id plane_id = plane->id;
2252 	enum pipe pipe = plane->pipe;
2253 	const struct skl_pipe_wm *pipe_wm = &crtc_state->wm.skl.optimal;
2254 	const struct skl_ddb_entry *ddb =
2255 		&crtc_state->wm.skl.plane_ddb[plane_id];
2256 	const struct skl_ddb_entry *ddb_y =
2257 		&crtc_state->wm.skl.plane_ddb_y[plane_id];
2258 
2259 	for (level = 0; level <= max_level; level++)
2260 		skl_write_wm_level(i915, PLANE_WM(pipe, plane_id, level),
2261 				   skl_plane_wm_level(pipe_wm, plane_id, level));
2262 
2263 	skl_write_wm_level(i915, PLANE_WM_TRANS(pipe, plane_id),
2264 			   skl_plane_trans_wm(pipe_wm, plane_id));
2265 
2266 	if (HAS_HW_SAGV_WM(i915)) {
2267 		const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
2268 
2269 		skl_write_wm_level(i915, PLANE_WM_SAGV(pipe, plane_id),
2270 				   &wm->sagv.wm0);
2271 		skl_write_wm_level(i915, PLANE_WM_SAGV_TRANS(pipe, plane_id),
2272 				   &wm->sagv.trans_wm);
2273 	}
2274 
2275 	skl_ddb_entry_write(i915,
2276 			    PLANE_BUF_CFG(pipe, plane_id), ddb);
2277 
2278 	if (DISPLAY_VER(i915) < 11)
2279 		skl_ddb_entry_write(i915,
2280 				    PLANE_NV12_BUF_CFG(pipe, plane_id), ddb_y);
2281 }
2282 
2283 void skl_write_cursor_wm(struct intel_plane *plane,
2284 			 const struct intel_crtc_state *crtc_state)
2285 {
2286 	struct drm_i915_private *i915 = to_i915(plane->base.dev);
2287 	int level, max_level = ilk_wm_max_level(i915);
2288 	enum plane_id plane_id = plane->id;
2289 	enum pipe pipe = plane->pipe;
2290 	const struct skl_pipe_wm *pipe_wm = &crtc_state->wm.skl.optimal;
2291 	const struct skl_ddb_entry *ddb =
2292 		&crtc_state->wm.skl.plane_ddb[plane_id];
2293 
2294 	for (level = 0; level <= max_level; level++)
2295 		skl_write_wm_level(i915, CUR_WM(pipe, level),
2296 				   skl_plane_wm_level(pipe_wm, plane_id, level));
2297 
2298 	skl_write_wm_level(i915, CUR_WM_TRANS(pipe),
2299 			   skl_plane_trans_wm(pipe_wm, plane_id));
2300 
2301 	if (HAS_HW_SAGV_WM(i915)) {
2302 		const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
2303 
2304 		skl_write_wm_level(i915, CUR_WM_SAGV(pipe),
2305 				   &wm->sagv.wm0);
2306 		skl_write_wm_level(i915, CUR_WM_SAGV_TRANS(pipe),
2307 				   &wm->sagv.trans_wm);
2308 	}
2309 
2310 	skl_ddb_entry_write(i915, CUR_BUF_CFG(pipe), ddb);
2311 }
2312 
2313 static bool skl_wm_level_equals(const struct skl_wm_level *l1,
2314 				const struct skl_wm_level *l2)
2315 {
2316 	return l1->enable == l2->enable &&
2317 		l1->ignore_lines == l2->ignore_lines &&
2318 		l1->lines == l2->lines &&
2319 		l1->blocks == l2->blocks;
2320 }
2321 
2322 static bool skl_plane_wm_equals(struct drm_i915_private *i915,
2323 				const struct skl_plane_wm *wm1,
2324 				const struct skl_plane_wm *wm2)
2325 {
2326 	int level, max_level = ilk_wm_max_level(i915);
2327 
2328 	for (level = 0; level <= max_level; level++) {
2329 		/*
2330 		 * We don't check uv_wm as the hardware doesn't actually
2331 		 * use it. It only gets used for calculating the required
2332 		 * ddb allocation.
2333 		 */
2334 		if (!skl_wm_level_equals(&wm1->wm[level], &wm2->wm[level]))
2335 			return false;
2336 	}
2337 
2338 	return skl_wm_level_equals(&wm1->trans_wm, &wm2->trans_wm) &&
2339 		skl_wm_level_equals(&wm1->sagv.wm0, &wm2->sagv.wm0) &&
2340 		skl_wm_level_equals(&wm1->sagv.trans_wm, &wm2->sagv.trans_wm);
2341 }
2342 
2343 static bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a,
2344 				    const struct skl_ddb_entry *b)
2345 {
2346 	return a->start < b->end && b->start < a->end;
2347 }
2348 
2349 static void skl_ddb_entry_union(struct skl_ddb_entry *a,
2350 				const struct skl_ddb_entry *b)
2351 {
2352 	if (a->end && b->end) {
2353 		a->start = min(a->start, b->start);
2354 		a->end = max(a->end, b->end);
2355 	} else if (b->end) {
2356 		a->start = b->start;
2357 		a->end = b->end;
2358 	}
2359 }
2360 
2361 bool skl_ddb_allocation_overlaps(const struct skl_ddb_entry *ddb,
2362 				 const struct skl_ddb_entry *entries,
2363 				 int num_entries, int ignore_idx)
2364 {
2365 	int i;
2366 
2367 	for (i = 0; i < num_entries; i++) {
2368 		if (i != ignore_idx &&
2369 		    skl_ddb_entries_overlap(ddb, &entries[i]))
2370 			return true;
2371 	}
2372 
2373 	return false;
2374 }
2375 
2376 static int
2377 skl_ddb_add_affected_planes(const struct intel_crtc_state *old_crtc_state,
2378 			    struct intel_crtc_state *new_crtc_state)
2379 {
2380 	struct intel_atomic_state *state = to_intel_atomic_state(new_crtc_state->uapi.state);
2381 	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
2382 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
2383 	struct intel_plane *plane;
2384 
2385 	for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
2386 		struct intel_plane_state *plane_state;
2387 		enum plane_id plane_id = plane->id;
2388 
2389 		if (skl_ddb_entry_equal(&old_crtc_state->wm.skl.plane_ddb[plane_id],
2390 					&new_crtc_state->wm.skl.plane_ddb[plane_id]) &&
2391 		    skl_ddb_entry_equal(&old_crtc_state->wm.skl.plane_ddb_y[plane_id],
2392 					&new_crtc_state->wm.skl.plane_ddb_y[plane_id]))
2393 			continue;
2394 
2395 		plane_state = intel_atomic_get_plane_state(state, plane);
2396 		if (IS_ERR(plane_state))
2397 			return PTR_ERR(plane_state);
2398 
2399 		new_crtc_state->update_planes |= BIT(plane_id);
2400 	}
2401 
2402 	return 0;
2403 }
2404 
2405 static u8 intel_dbuf_enabled_slices(const struct intel_dbuf_state *dbuf_state)
2406 {
2407 	struct drm_i915_private *i915 = to_i915(dbuf_state->base.state->base.dev);
2408 	u8 enabled_slices;
2409 	enum pipe pipe;
2410 
2411 	/*
2412 	 * FIXME: For now we always enable slice S1 as per
2413 	 * the Bspec display initialization sequence.
2414 	 */
2415 	enabled_slices = BIT(DBUF_S1);
2416 
2417 	for_each_pipe(i915, pipe)
2418 		enabled_slices |= dbuf_state->slices[pipe];
2419 
2420 	return enabled_slices;
2421 }
2422 
2423 static int
2424 skl_compute_ddb(struct intel_atomic_state *state)
2425 {
2426 	struct drm_i915_private *i915 = to_i915(state->base.dev);
2427 	const struct intel_dbuf_state *old_dbuf_state;
2428 	struct intel_dbuf_state *new_dbuf_state = NULL;
2429 	const struct intel_crtc_state *old_crtc_state;
2430 	struct intel_crtc_state *new_crtc_state;
2431 	struct intel_crtc *crtc;
2432 	int ret, i;
2433 
2434 	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
2435 		new_dbuf_state = intel_atomic_get_dbuf_state(state);
2436 		if (IS_ERR(new_dbuf_state))
2437 			return PTR_ERR(new_dbuf_state);
2438 
2439 		old_dbuf_state = intel_atomic_get_old_dbuf_state(state);
2440 		break;
2441 	}
2442 
2443 	if (!new_dbuf_state)
2444 		return 0;
2445 
2446 	new_dbuf_state->active_pipes =
2447 		intel_calc_active_pipes(state, old_dbuf_state->active_pipes);
2448 
2449 	if (old_dbuf_state->active_pipes != new_dbuf_state->active_pipes) {
2450 		ret = intel_atomic_lock_global_state(&new_dbuf_state->base);
2451 		if (ret)
2452 			return ret;
2453 	}
2454 
2455 	if (HAS_MBUS_JOINING(i915))
2456 		new_dbuf_state->joined_mbus =
2457 			adlp_check_mbus_joined(new_dbuf_state->active_pipes);
2458 
2459 	for_each_intel_crtc(&i915->drm, crtc) {
2460 		enum pipe pipe = crtc->pipe;
2461 
2462 		new_dbuf_state->slices[pipe] =
2463 			skl_compute_dbuf_slices(crtc, new_dbuf_state->active_pipes,
2464 						new_dbuf_state->joined_mbus);
2465 
2466 		if (old_dbuf_state->slices[pipe] == new_dbuf_state->slices[pipe])
2467 			continue;
2468 
2469 		ret = intel_atomic_lock_global_state(&new_dbuf_state->base);
2470 		if (ret)
2471 			return ret;
2472 	}
2473 
2474 	new_dbuf_state->enabled_slices = intel_dbuf_enabled_slices(new_dbuf_state);
2475 
2476 	if (old_dbuf_state->enabled_slices != new_dbuf_state->enabled_slices ||
2477 	    old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
2478 		ret = intel_atomic_serialize_global_state(&new_dbuf_state->base);
2479 		if (ret)
2480 			return ret;
2481 
2482 		if (old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
2483 			/* TODO: Implement vblank synchronized MBUS joining changes */
2484 			ret = intel_modeset_all_pipes(state, "MBUS joining change");
2485 			if (ret)
2486 				return ret;
2487 		}
2488 
2489 		drm_dbg_kms(&i915->drm,
2490 			    "Enabled dbuf slices 0x%x -> 0x%x (total dbuf slices 0x%x), mbus joined? %s->%s\n",
2491 			    old_dbuf_state->enabled_slices,
2492 			    new_dbuf_state->enabled_slices,
2493 			    INTEL_INFO(i915)->display.dbuf.slice_mask,
2494 			    str_yes_no(old_dbuf_state->joined_mbus),
2495 			    str_yes_no(new_dbuf_state->joined_mbus));
2496 	}
2497 
2498 	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
2499 		enum pipe pipe = crtc->pipe;
2500 
2501 		new_dbuf_state->weight[pipe] = intel_crtc_ddb_weight(new_crtc_state);
2502 
2503 		if (old_dbuf_state->weight[pipe] == new_dbuf_state->weight[pipe])
2504 			continue;
2505 
2506 		ret = intel_atomic_lock_global_state(&new_dbuf_state->base);
2507 		if (ret)
2508 			return ret;
2509 	}
2510 
2511 	for_each_intel_crtc(&i915->drm, crtc) {
2512 		ret = skl_crtc_allocate_ddb(state, crtc);
2513 		if (ret)
2514 			return ret;
2515 	}
2516 
2517 	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
2518 					    new_crtc_state, i) {
2519 		ret = skl_crtc_allocate_plane_ddb(state, crtc);
2520 		if (ret)
2521 			return ret;
2522 
2523 		ret = skl_ddb_add_affected_planes(old_crtc_state,
2524 						  new_crtc_state);
2525 		if (ret)
2526 			return ret;
2527 	}
2528 
2529 	return 0;
2530 }
2531 
2532 static char enast(bool enable)
2533 {
2534 	return enable ? '*' : ' ';
2535 }
2536 
2537 static void
2538 skl_print_wm_changes(struct intel_atomic_state *state)
2539 {
2540 	struct drm_i915_private *i915 = to_i915(state->base.dev);
2541 	const struct intel_crtc_state *old_crtc_state;
2542 	const struct intel_crtc_state *new_crtc_state;
2543 	struct intel_plane *plane;
2544 	struct intel_crtc *crtc;
2545 	int i;
2546 
2547 	if (!drm_debug_enabled(DRM_UT_KMS))
2548 		return;
2549 
2550 	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
2551 					    new_crtc_state, i) {
2552 		const struct skl_pipe_wm *old_pipe_wm, *new_pipe_wm;
2553 
2554 		old_pipe_wm = &old_crtc_state->wm.skl.optimal;
2555 		new_pipe_wm = &new_crtc_state->wm.skl.optimal;
2556 
2557 		for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
2558 			enum plane_id plane_id = plane->id;
2559 			const struct skl_ddb_entry *old, *new;
2560 
2561 			old = &old_crtc_state->wm.skl.plane_ddb[plane_id];
2562 			new = &new_crtc_state->wm.skl.plane_ddb[plane_id];
2563 
2564 			if (skl_ddb_entry_equal(old, new))
2565 				continue;
2566 
2567 			drm_dbg_kms(&i915->drm,
2568 				    "[PLANE:%d:%s] ddb (%4d - %4d) -> (%4d - %4d), size %4d -> %4d\n",
2569 				    plane->base.base.id, plane->base.name,
2570 				    old->start, old->end, new->start, new->end,
2571 				    skl_ddb_entry_size(old), skl_ddb_entry_size(new));
2572 		}
2573 
2574 		for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
2575 			enum plane_id plane_id = plane->id;
2576 			const struct skl_plane_wm *old_wm, *new_wm;
2577 
2578 			old_wm = &old_pipe_wm->planes[plane_id];
2579 			new_wm = &new_pipe_wm->planes[plane_id];
2580 
2581 			if (skl_plane_wm_equals(i915, old_wm, new_wm))
2582 				continue;
2583 
2584 			drm_dbg_kms(&i915->drm,
2585 				    "[PLANE:%d:%s]   level %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm,%cswm,%cstwm"
2586 				    " -> %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm,%cswm,%cstwm\n",
2587 				    plane->base.base.id, plane->base.name,
2588 				    enast(old_wm->wm[0].enable), enast(old_wm->wm[1].enable),
2589 				    enast(old_wm->wm[2].enable), enast(old_wm->wm[3].enable),
2590 				    enast(old_wm->wm[4].enable), enast(old_wm->wm[5].enable),
2591 				    enast(old_wm->wm[6].enable), enast(old_wm->wm[7].enable),
2592 				    enast(old_wm->trans_wm.enable),
2593 				    enast(old_wm->sagv.wm0.enable),
2594 				    enast(old_wm->sagv.trans_wm.enable),
2595 				    enast(new_wm->wm[0].enable), enast(new_wm->wm[1].enable),
2596 				    enast(new_wm->wm[2].enable), enast(new_wm->wm[3].enable),
2597 				    enast(new_wm->wm[4].enable), enast(new_wm->wm[5].enable),
2598 				    enast(new_wm->wm[6].enable), enast(new_wm->wm[7].enable),
2599 				    enast(new_wm->trans_wm.enable),
2600 				    enast(new_wm->sagv.wm0.enable),
2601 				    enast(new_wm->sagv.trans_wm.enable));
2602 
2603 			drm_dbg_kms(&i915->drm,
2604 				    "[PLANE:%d:%s]   lines %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%4d"
2605 				      " -> %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%4d\n",
2606 				    plane->base.base.id, plane->base.name,
2607 				    enast(old_wm->wm[0].ignore_lines), old_wm->wm[0].lines,
2608 				    enast(old_wm->wm[1].ignore_lines), old_wm->wm[1].lines,
2609 				    enast(old_wm->wm[2].ignore_lines), old_wm->wm[2].lines,
2610 				    enast(old_wm->wm[3].ignore_lines), old_wm->wm[3].lines,
2611 				    enast(old_wm->wm[4].ignore_lines), old_wm->wm[4].lines,
2612 				    enast(old_wm->wm[5].ignore_lines), old_wm->wm[5].lines,
2613 				    enast(old_wm->wm[6].ignore_lines), old_wm->wm[6].lines,
2614 				    enast(old_wm->wm[7].ignore_lines), old_wm->wm[7].lines,
2615 				    enast(old_wm->trans_wm.ignore_lines), old_wm->trans_wm.lines,
2616 				    enast(old_wm->sagv.wm0.ignore_lines), old_wm->sagv.wm0.lines,
2617 				    enast(old_wm->sagv.trans_wm.ignore_lines), old_wm->sagv.trans_wm.lines,
2618 				    enast(new_wm->wm[0].ignore_lines), new_wm->wm[0].lines,
2619 				    enast(new_wm->wm[1].ignore_lines), new_wm->wm[1].lines,
2620 				    enast(new_wm->wm[2].ignore_lines), new_wm->wm[2].lines,
2621 				    enast(new_wm->wm[3].ignore_lines), new_wm->wm[3].lines,
2622 				    enast(new_wm->wm[4].ignore_lines), new_wm->wm[4].lines,
2623 				    enast(new_wm->wm[5].ignore_lines), new_wm->wm[5].lines,
2624 				    enast(new_wm->wm[6].ignore_lines), new_wm->wm[6].lines,
2625 				    enast(new_wm->wm[7].ignore_lines), new_wm->wm[7].lines,
2626 				    enast(new_wm->trans_wm.ignore_lines), new_wm->trans_wm.lines,
2627 				    enast(new_wm->sagv.wm0.ignore_lines), new_wm->sagv.wm0.lines,
2628 				    enast(new_wm->sagv.trans_wm.ignore_lines), new_wm->sagv.trans_wm.lines);
2629 
2630 			drm_dbg_kms(&i915->drm,
2631 				    "[PLANE:%d:%s]  blocks %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d"
2632 				    " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d\n",
2633 				    plane->base.base.id, plane->base.name,
2634 				    old_wm->wm[0].blocks, old_wm->wm[1].blocks,
2635 				    old_wm->wm[2].blocks, old_wm->wm[3].blocks,
2636 				    old_wm->wm[4].blocks, old_wm->wm[5].blocks,
2637 				    old_wm->wm[6].blocks, old_wm->wm[7].blocks,
2638 				    old_wm->trans_wm.blocks,
2639 				    old_wm->sagv.wm0.blocks,
2640 				    old_wm->sagv.trans_wm.blocks,
2641 				    new_wm->wm[0].blocks, new_wm->wm[1].blocks,
2642 				    new_wm->wm[2].blocks, new_wm->wm[3].blocks,
2643 				    new_wm->wm[4].blocks, new_wm->wm[5].blocks,
2644 				    new_wm->wm[6].blocks, new_wm->wm[7].blocks,
2645 				    new_wm->trans_wm.blocks,
2646 				    new_wm->sagv.wm0.blocks,
2647 				    new_wm->sagv.trans_wm.blocks);
2648 
2649 			drm_dbg_kms(&i915->drm,
2650 				    "[PLANE:%d:%s] min_ddb %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d"
2651 				    " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d\n",
2652 				    plane->base.base.id, plane->base.name,
2653 				    old_wm->wm[0].min_ddb_alloc, old_wm->wm[1].min_ddb_alloc,
2654 				    old_wm->wm[2].min_ddb_alloc, old_wm->wm[3].min_ddb_alloc,
2655 				    old_wm->wm[4].min_ddb_alloc, old_wm->wm[5].min_ddb_alloc,
2656 				    old_wm->wm[6].min_ddb_alloc, old_wm->wm[7].min_ddb_alloc,
2657 				    old_wm->trans_wm.min_ddb_alloc,
2658 				    old_wm->sagv.wm0.min_ddb_alloc,
2659 				    old_wm->sagv.trans_wm.min_ddb_alloc,
2660 				    new_wm->wm[0].min_ddb_alloc, new_wm->wm[1].min_ddb_alloc,
2661 				    new_wm->wm[2].min_ddb_alloc, new_wm->wm[3].min_ddb_alloc,
2662 				    new_wm->wm[4].min_ddb_alloc, new_wm->wm[5].min_ddb_alloc,
2663 				    new_wm->wm[6].min_ddb_alloc, new_wm->wm[7].min_ddb_alloc,
2664 				    new_wm->trans_wm.min_ddb_alloc,
2665 				    new_wm->sagv.wm0.min_ddb_alloc,
2666 				    new_wm->sagv.trans_wm.min_ddb_alloc);
2667 		}
2668 	}
2669 }
2670 
2671 static bool skl_plane_selected_wm_equals(struct intel_plane *plane,
2672 					 const struct skl_pipe_wm *old_pipe_wm,
2673 					 const struct skl_pipe_wm *new_pipe_wm)
2674 {
2675 	struct drm_i915_private *i915 = to_i915(plane->base.dev);
2676 	int level, max_level = ilk_wm_max_level(i915);
2677 
2678 	for (level = 0; level <= max_level; level++) {
2679 		/*
2680 		 * We don't check uv_wm as the hardware doesn't actually
2681 		 * use it. It only gets used for calculating the required
2682 		 * ddb allocation.
2683 		 */
2684 		if (!skl_wm_level_equals(skl_plane_wm_level(old_pipe_wm, plane->id, level),
2685 					 skl_plane_wm_level(new_pipe_wm, plane->id, level)))
2686 			return false;
2687 	}
2688 
2689 	if (HAS_HW_SAGV_WM(i915)) {
2690 		const struct skl_plane_wm *old_wm = &old_pipe_wm->planes[plane->id];
2691 		const struct skl_plane_wm *new_wm = &new_pipe_wm->planes[plane->id];
2692 
2693 		if (!skl_wm_level_equals(&old_wm->sagv.wm0, &new_wm->sagv.wm0) ||
2694 		    !skl_wm_level_equals(&old_wm->sagv.trans_wm, &new_wm->sagv.trans_wm))
2695 			return false;
2696 	}
2697 
2698 	return skl_wm_level_equals(skl_plane_trans_wm(old_pipe_wm, plane->id),
2699 				   skl_plane_trans_wm(new_pipe_wm, plane->id));
2700 }
2701 
2702 /*
2703  * To make sure the cursor watermark registers are always consistent
2704  * with our computed state the following scenario needs special
2705  * treatment:
2706  *
2707  * 1. enable cursor
2708  * 2. move cursor entirely offscreen
2709  * 3. disable cursor
2710  *
2711  * Step 2. does call .disable_plane() but does not zero the watermarks
2712  * (since we consider an offscreen cursor still active for the purposes
2713  * of watermarks). Step 3. would not normally call .disable_plane()
2714  * because the actual plane visibility isn't changing, and we don't
2715  * deallocate the cursor ddb until the pipe gets disabled. So we must
2716  * force step 3. to call .disable_plane() to update the watermark
2717  * registers properly.
2718  *
2719  * Other planes do not suffer from this issues as their watermarks are
2720  * calculated based on the actual plane visibility. The only time this
2721  * can trigger for the other planes is during the initial readout as the
2722  * default value of the watermarks registers is not zero.
2723  */
2724 static int skl_wm_add_affected_planes(struct intel_atomic_state *state,
2725 				      struct intel_crtc *crtc)
2726 {
2727 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
2728 	const struct intel_crtc_state *old_crtc_state =
2729 		intel_atomic_get_old_crtc_state(state, crtc);
2730 	struct intel_crtc_state *new_crtc_state =
2731 		intel_atomic_get_new_crtc_state(state, crtc);
2732 	struct intel_plane *plane;
2733 
2734 	for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
2735 		struct intel_plane_state *plane_state;
2736 		enum plane_id plane_id = plane->id;
2737 
2738 		/*
2739 		 * Force a full wm update for every plane on modeset.
2740 		 * Required because the reset value of the wm registers
2741 		 * is non-zero, whereas we want all disabled planes to
2742 		 * have zero watermarks. So if we turn off the relevant
2743 		 * power well the hardware state will go out of sync
2744 		 * with the software state.
2745 		 */
2746 		if (!intel_crtc_needs_modeset(new_crtc_state) &&
2747 		    skl_plane_selected_wm_equals(plane,
2748 						 &old_crtc_state->wm.skl.optimal,
2749 						 &new_crtc_state->wm.skl.optimal))
2750 			continue;
2751 
2752 		plane_state = intel_atomic_get_plane_state(state, plane);
2753 		if (IS_ERR(plane_state))
2754 			return PTR_ERR(plane_state);
2755 
2756 		new_crtc_state->update_planes |= BIT(plane_id);
2757 	}
2758 
2759 	return 0;
2760 }
2761 
2762 static int
2763 skl_compute_wm(struct intel_atomic_state *state)
2764 {
2765 	struct intel_crtc *crtc;
2766 	struct intel_crtc_state *new_crtc_state;
2767 	int ret, i;
2768 
2769 	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
2770 		ret = skl_build_pipe_wm(state, crtc);
2771 		if (ret)
2772 			return ret;
2773 	}
2774 
2775 	ret = skl_compute_ddb(state);
2776 	if (ret)
2777 		return ret;
2778 
2779 	ret = intel_compute_sagv_mask(state);
2780 	if (ret)
2781 		return ret;
2782 
2783 	/*
2784 	 * skl_compute_ddb() will have adjusted the final watermarks
2785 	 * based on how much ddb is available. Now we can actually
2786 	 * check if the final watermarks changed.
2787 	 */
2788 	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
2789 		ret = skl_wm_add_affected_planes(state, crtc);
2790 		if (ret)
2791 			return ret;
2792 	}
2793 
2794 	skl_print_wm_changes(state);
2795 
2796 	return 0;
2797 }
2798 
2799 static void skl_wm_level_from_reg_val(u32 val, struct skl_wm_level *level)
2800 {
2801 	level->enable = val & PLANE_WM_EN;
2802 	level->ignore_lines = val & PLANE_WM_IGNORE_LINES;
2803 	level->blocks = REG_FIELD_GET(PLANE_WM_BLOCKS_MASK, val);
2804 	level->lines = REG_FIELD_GET(PLANE_WM_LINES_MASK, val);
2805 }
2806 
2807 static void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
2808 				     struct skl_pipe_wm *out)
2809 {
2810 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
2811 	enum pipe pipe = crtc->pipe;
2812 	int level, max_level;
2813 	enum plane_id plane_id;
2814 	u32 val;
2815 
2816 	max_level = ilk_wm_max_level(i915);
2817 
2818 	for_each_plane_id_on_crtc(crtc, plane_id) {
2819 		struct skl_plane_wm *wm = &out->planes[plane_id];
2820 
2821 		for (level = 0; level <= max_level; level++) {
2822 			if (plane_id != PLANE_CURSOR)
2823 				val = intel_de_read(i915, PLANE_WM(pipe, plane_id, level));
2824 			else
2825 				val = intel_de_read(i915, CUR_WM(pipe, level));
2826 
2827 			skl_wm_level_from_reg_val(val, &wm->wm[level]);
2828 		}
2829 
2830 		if (plane_id != PLANE_CURSOR)
2831 			val = intel_de_read(i915, PLANE_WM_TRANS(pipe, plane_id));
2832 		else
2833 			val = intel_de_read(i915, CUR_WM_TRANS(pipe));
2834 
2835 		skl_wm_level_from_reg_val(val, &wm->trans_wm);
2836 
2837 		if (HAS_HW_SAGV_WM(i915)) {
2838 			if (plane_id != PLANE_CURSOR)
2839 				val = intel_de_read(i915, PLANE_WM_SAGV(pipe, plane_id));
2840 			else
2841 				val = intel_de_read(i915, CUR_WM_SAGV(pipe));
2842 
2843 			skl_wm_level_from_reg_val(val, &wm->sagv.wm0);
2844 
2845 			if (plane_id != PLANE_CURSOR)
2846 				val = intel_de_read(i915, PLANE_WM_SAGV_TRANS(pipe, plane_id));
2847 			else
2848 				val = intel_de_read(i915, CUR_WM_SAGV_TRANS(pipe));
2849 
2850 			skl_wm_level_from_reg_val(val, &wm->sagv.trans_wm);
2851 		} else if (DISPLAY_VER(i915) >= 12) {
2852 			wm->sagv.wm0 = wm->wm[0];
2853 			wm->sagv.trans_wm = wm->trans_wm;
2854 		}
2855 	}
2856 }
2857 
2858 void skl_wm_get_hw_state(struct drm_i915_private *i915)
2859 {
2860 	struct intel_dbuf_state *dbuf_state =
2861 		to_intel_dbuf_state(i915->display.dbuf.obj.state);
2862 	struct intel_crtc *crtc;
2863 
2864 	if (HAS_MBUS_JOINING(i915))
2865 		dbuf_state->joined_mbus = intel_de_read(i915, MBUS_CTL) & MBUS_JOIN;
2866 
2867 	for_each_intel_crtc(&i915->drm, crtc) {
2868 		struct intel_crtc_state *crtc_state =
2869 			to_intel_crtc_state(crtc->base.state);
2870 		enum pipe pipe = crtc->pipe;
2871 		unsigned int mbus_offset;
2872 		enum plane_id plane_id;
2873 		u8 slices;
2874 
2875 		memset(&crtc_state->wm.skl.optimal, 0,
2876 		       sizeof(crtc_state->wm.skl.optimal));
2877 		if (crtc_state->hw.active)
2878 			skl_pipe_wm_get_hw_state(crtc, &crtc_state->wm.skl.optimal);
2879 		crtc_state->wm.skl.raw = crtc_state->wm.skl.optimal;
2880 
2881 		memset(&dbuf_state->ddb[pipe], 0, sizeof(dbuf_state->ddb[pipe]));
2882 
2883 		for_each_plane_id_on_crtc(crtc, plane_id) {
2884 			struct skl_ddb_entry *ddb =
2885 				&crtc_state->wm.skl.plane_ddb[plane_id];
2886 			struct skl_ddb_entry *ddb_y =
2887 				&crtc_state->wm.skl.plane_ddb_y[plane_id];
2888 
2889 			if (!crtc_state->hw.active)
2890 				continue;
2891 
2892 			skl_ddb_get_hw_plane_state(i915, crtc->pipe,
2893 						   plane_id, ddb, ddb_y);
2894 
2895 			skl_ddb_entry_union(&dbuf_state->ddb[pipe], ddb);
2896 			skl_ddb_entry_union(&dbuf_state->ddb[pipe], ddb_y);
2897 		}
2898 
2899 		dbuf_state->weight[pipe] = intel_crtc_ddb_weight(crtc_state);
2900 
2901 		/*
2902 		 * Used for checking overlaps, so we need absolute
2903 		 * offsets instead of MBUS relative offsets.
2904 		 */
2905 		slices = skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes,
2906 						 dbuf_state->joined_mbus);
2907 		mbus_offset = mbus_ddb_offset(i915, slices);
2908 		crtc_state->wm.skl.ddb.start = mbus_offset + dbuf_state->ddb[pipe].start;
2909 		crtc_state->wm.skl.ddb.end = mbus_offset + dbuf_state->ddb[pipe].end;
2910 
2911 		/* The slices actually used by the planes on the pipe */
2912 		dbuf_state->slices[pipe] =
2913 			skl_ddb_dbuf_slice_mask(i915, &crtc_state->wm.skl.ddb);
2914 
2915 		drm_dbg_kms(&i915->drm,
2916 			    "[CRTC:%d:%s] dbuf slices 0x%x, ddb (%d - %d), active pipes 0x%x, mbus joined: %s\n",
2917 			    crtc->base.base.id, crtc->base.name,
2918 			    dbuf_state->slices[pipe], dbuf_state->ddb[pipe].start,
2919 			    dbuf_state->ddb[pipe].end, dbuf_state->active_pipes,
2920 			    str_yes_no(dbuf_state->joined_mbus));
2921 	}
2922 
2923 	dbuf_state->enabled_slices = i915->display.dbuf.enabled_slices;
2924 }
2925 
2926 static bool skl_dbuf_is_misconfigured(struct drm_i915_private *i915)
2927 {
2928 	const struct intel_dbuf_state *dbuf_state =
2929 		to_intel_dbuf_state(i915->display.dbuf.obj.state);
2930 	struct skl_ddb_entry entries[I915_MAX_PIPES] = {};
2931 	struct intel_crtc *crtc;
2932 
2933 	for_each_intel_crtc(&i915->drm, crtc) {
2934 		const struct intel_crtc_state *crtc_state =
2935 			to_intel_crtc_state(crtc->base.state);
2936 
2937 		entries[crtc->pipe] = crtc_state->wm.skl.ddb;
2938 	}
2939 
2940 	for_each_intel_crtc(&i915->drm, crtc) {
2941 		const struct intel_crtc_state *crtc_state =
2942 			to_intel_crtc_state(crtc->base.state);
2943 		u8 slices;
2944 
2945 		slices = skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes,
2946 						 dbuf_state->joined_mbus);
2947 		if (dbuf_state->slices[crtc->pipe] & ~slices)
2948 			return true;
2949 
2950 		if (skl_ddb_allocation_overlaps(&crtc_state->wm.skl.ddb, entries,
2951 						I915_MAX_PIPES, crtc->pipe))
2952 			return true;
2953 	}
2954 
2955 	return false;
2956 }
2957 
2958 void skl_wm_sanitize(struct drm_i915_private *i915)
2959 {
2960 	struct intel_crtc *crtc;
2961 
2962 	/*
2963 	 * On TGL/RKL (at least) the BIOS likes to assign the planes
2964 	 * to the wrong DBUF slices. This will cause an infinite loop
2965 	 * in skl_commit_modeset_enables() as it can't find a way to
2966 	 * transition between the old bogus DBUF layout to the new
2967 	 * proper DBUF layout without DBUF allocation overlaps between
2968 	 * the planes (which cannot be allowed or else the hardware
2969 	 * may hang). If we detect a bogus DBUF layout just turn off
2970 	 * all the planes so that skl_commit_modeset_enables() can
2971 	 * simply ignore them.
2972 	 */
2973 	if (!skl_dbuf_is_misconfigured(i915))
2974 		return;
2975 
2976 	drm_dbg_kms(&i915->drm, "BIOS has misprogrammed the DBUF, disabling all planes\n");
2977 
2978 	for_each_intel_crtc(&i915->drm, crtc) {
2979 		struct intel_plane *plane = to_intel_plane(crtc->base.primary);
2980 		const struct intel_plane_state *plane_state =
2981 			to_intel_plane_state(plane->base.state);
2982 		struct intel_crtc_state *crtc_state =
2983 			to_intel_crtc_state(crtc->base.state);
2984 
2985 		if (plane_state->uapi.visible)
2986 			intel_plane_disable_noatomic(crtc, plane);
2987 
2988 		drm_WARN_ON(&i915->drm, crtc_state->active_planes != 0);
2989 
2990 		memset(&crtc_state->wm.skl.ddb, 0, sizeof(crtc_state->wm.skl.ddb));
2991 	}
2992 }
2993 
2994 void intel_wm_state_verify(struct intel_crtc *crtc,
2995 			   struct intel_crtc_state *new_crtc_state)
2996 {
2997 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
2998 	struct skl_hw_state {
2999 		struct skl_ddb_entry ddb[I915_MAX_PLANES];
3000 		struct skl_ddb_entry ddb_y[I915_MAX_PLANES];
3001 		struct skl_pipe_wm wm;
3002 	} *hw;
3003 	const struct skl_pipe_wm *sw_wm = &new_crtc_state->wm.skl.optimal;
3004 	int level, max_level = ilk_wm_max_level(i915);
3005 	struct intel_plane *plane;
3006 	u8 hw_enabled_slices;
3007 
3008 	if (DISPLAY_VER(i915) < 9 || !new_crtc_state->hw.active)
3009 		return;
3010 
3011 	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
3012 	if (!hw)
3013 		return;
3014 
3015 	skl_pipe_wm_get_hw_state(crtc, &hw->wm);
3016 
3017 	skl_pipe_ddb_get_hw_state(crtc, hw->ddb, hw->ddb_y);
3018 
3019 	hw_enabled_slices = intel_enabled_dbuf_slices_mask(i915);
3020 
3021 	if (DISPLAY_VER(i915) >= 11 &&
3022 	    hw_enabled_slices != i915->display.dbuf.enabled_slices)
3023 		drm_err(&i915->drm,
3024 			"mismatch in DBUF Slices (expected 0x%x, got 0x%x)\n",
3025 			i915->display.dbuf.enabled_slices,
3026 			hw_enabled_slices);
3027 
3028 	for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) {
3029 		const struct skl_ddb_entry *hw_ddb_entry, *sw_ddb_entry;
3030 		const struct skl_wm_level *hw_wm_level, *sw_wm_level;
3031 
3032 		/* Watermarks */
3033 		for (level = 0; level <= max_level; level++) {
3034 			hw_wm_level = &hw->wm.planes[plane->id].wm[level];
3035 			sw_wm_level = skl_plane_wm_level(sw_wm, plane->id, level);
3036 
3037 			if (skl_wm_level_equals(hw_wm_level, sw_wm_level))
3038 				continue;
3039 
3040 			drm_err(&i915->drm,
3041 				"[PLANE:%d:%s] mismatch in WM%d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
3042 				plane->base.base.id, plane->base.name, level,
3043 				sw_wm_level->enable,
3044 				sw_wm_level->blocks,
3045 				sw_wm_level->lines,
3046 				hw_wm_level->enable,
3047 				hw_wm_level->blocks,
3048 				hw_wm_level->lines);
3049 		}
3050 
3051 		hw_wm_level = &hw->wm.planes[plane->id].trans_wm;
3052 		sw_wm_level = skl_plane_trans_wm(sw_wm, plane->id);
3053 
3054 		if (!skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
3055 			drm_err(&i915->drm,
3056 				"[PLANE:%d:%s] mismatch in trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
3057 				plane->base.base.id, plane->base.name,
3058 				sw_wm_level->enable,
3059 				sw_wm_level->blocks,
3060 				sw_wm_level->lines,
3061 				hw_wm_level->enable,
3062 				hw_wm_level->blocks,
3063 				hw_wm_level->lines);
3064 		}
3065 
3066 		hw_wm_level = &hw->wm.planes[plane->id].sagv.wm0;
3067 		sw_wm_level = &sw_wm->planes[plane->id].sagv.wm0;
3068 
3069 		if (HAS_HW_SAGV_WM(i915) &&
3070 		    !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
3071 			drm_err(&i915->drm,
3072 				"[PLANE:%d:%s] mismatch in SAGV WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
3073 				plane->base.base.id, plane->base.name,
3074 				sw_wm_level->enable,
3075 				sw_wm_level->blocks,
3076 				sw_wm_level->lines,
3077 				hw_wm_level->enable,
3078 				hw_wm_level->blocks,
3079 				hw_wm_level->lines);
3080 		}
3081 
3082 		hw_wm_level = &hw->wm.planes[plane->id].sagv.trans_wm;
3083 		sw_wm_level = &sw_wm->planes[plane->id].sagv.trans_wm;
3084 
3085 		if (HAS_HW_SAGV_WM(i915) &&
3086 		    !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
3087 			drm_err(&i915->drm,
3088 				"[PLANE:%d:%s] mismatch in SAGV trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
3089 				plane->base.base.id, plane->base.name,
3090 				sw_wm_level->enable,
3091 				sw_wm_level->blocks,
3092 				sw_wm_level->lines,
3093 				hw_wm_level->enable,
3094 				hw_wm_level->blocks,
3095 				hw_wm_level->lines);
3096 		}
3097 
3098 		/* DDB */
3099 		hw_ddb_entry = &hw->ddb[PLANE_CURSOR];
3100 		sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb[PLANE_CURSOR];
3101 
3102 		if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) {
3103 			drm_err(&i915->drm,
3104 				"[PLANE:%d:%s] mismatch in DDB (expected (%u,%u), found (%u,%u))\n",
3105 				plane->base.base.id, plane->base.name,
3106 				sw_ddb_entry->start, sw_ddb_entry->end,
3107 				hw_ddb_entry->start, hw_ddb_entry->end);
3108 		}
3109 	}
3110 
3111 	kfree(hw);
3112 }
3113 
3114 bool skl_watermark_ipc_enabled(struct drm_i915_private *i915)
3115 {
3116 	return i915->display.wm.ipc_enabled;
3117 }
3118 
3119 void skl_watermark_ipc_update(struct drm_i915_private *i915)
3120 {
3121 	if (!HAS_IPC(i915))
3122 		return;
3123 
3124 	intel_de_rmw(i915, DISP_ARB_CTL2, DISP_IPC_ENABLE,
3125 		     skl_watermark_ipc_enabled(i915) ? DISP_IPC_ENABLE : 0);
3126 }
3127 
3128 static bool skl_watermark_ipc_can_enable(struct drm_i915_private *i915)
3129 {
3130 	/* Display WA #0477 WaDisableIPC: skl */
3131 	if (IS_SKYLAKE(i915))
3132 		return false;
3133 
3134 	/* Display WA #1141: SKL:all KBL:all CFL */
3135 	if (IS_KABYLAKE(i915) ||
3136 	    IS_COFFEELAKE(i915) ||
3137 	    IS_COMETLAKE(i915))
3138 		return i915->dram_info.symmetric_memory;
3139 
3140 	return true;
3141 }
3142 
3143 void skl_watermark_ipc_init(struct drm_i915_private *i915)
3144 {
3145 	if (!HAS_IPC(i915))
3146 		return;
3147 
3148 	i915->display.wm.ipc_enabled = skl_watermark_ipc_can_enable(i915);
3149 
3150 	skl_watermark_ipc_update(i915);
3151 }
3152 
3153 static void
3154 adjust_wm_latency(struct drm_i915_private *i915,
3155 		  u16 wm[], int max_level, int read_latency)
3156 {
3157 	bool wm_lv_0_adjust_needed = i915->dram_info.wm_lv_0_adjust_needed;
3158 	int i, level;
3159 
3160 	/*
3161 	 * If a level n (n > 1) has a 0us latency, all levels m (m >= n)
3162 	 * need to be disabled. We make sure to sanitize the values out
3163 	 * of the punit to satisfy this requirement.
3164 	 */
3165 	for (level = 1; level <= max_level; level++) {
3166 		if (wm[level] == 0) {
3167 			for (i = level + 1; i <= max_level; i++)
3168 				wm[i] = 0;
3169 
3170 			max_level = level - 1;
3171 			break;
3172 		}
3173 	}
3174 
3175 	/*
3176 	 * WaWmMemoryReadLatency
3177 	 *
3178 	 * punit doesn't take into account the read latency so we need
3179 	 * to add proper adjustement to each valid level we retrieve
3180 	 * from the punit when level 0 response data is 0us.
3181 	 */
3182 	if (wm[0] == 0) {
3183 		for (level = 0; level <= max_level; level++)
3184 			wm[level] += read_latency;
3185 	}
3186 
3187 	/*
3188 	 * WA Level-0 adjustment for 16GB DIMMs: SKL+
3189 	 * If we could not get dimm info enable this WA to prevent from
3190 	 * any underrun. If not able to get Dimm info assume 16GB dimm
3191 	 * to avoid any underrun.
3192 	 */
3193 	if (wm_lv_0_adjust_needed)
3194 		wm[0] += 1;
3195 }
3196 
3197 static void mtl_read_wm_latency(struct drm_i915_private *i915, u16 wm[])
3198 {
3199 	int max_level = ilk_wm_max_level(i915);
3200 	u32 val;
3201 
3202 	val = intel_de_read(i915, MTL_LATENCY_LP0_LP1);
3203 	wm[0] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val);
3204 	wm[1] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val);
3205 
3206 	val = intel_de_read(i915, MTL_LATENCY_LP2_LP3);
3207 	wm[2] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val);
3208 	wm[3] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val);
3209 
3210 	val = intel_de_read(i915, MTL_LATENCY_LP4_LP5);
3211 	wm[4] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val);
3212 	wm[5] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val);
3213 
3214 	adjust_wm_latency(i915, wm, max_level, 6);
3215 }
3216 
3217 static void skl_read_wm_latency(struct drm_i915_private *i915, u16 wm[])
3218 {
3219 	int max_level = ilk_wm_max_level(i915);
3220 	int read_latency = DISPLAY_VER(i915) >= 12 ? 3 : 2;
3221 	int mult = IS_DG2(i915) ? 2 : 1;
3222 	u32 val;
3223 	int ret;
3224 
3225 	/* read the first set of memory latencies[0:3] */
3226 	val = 0; /* data0 to be programmed to 0 for first set */
3227 	ret = snb_pcode_read(&i915->uncore, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL);
3228 	if (ret) {
3229 		drm_err(&i915->drm, "SKL Mailbox read error = %d\n", ret);
3230 		return;
3231 	}
3232 
3233 	wm[0] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_0_4_MASK, val) * mult;
3234 	wm[1] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_1_5_MASK, val) * mult;
3235 	wm[2] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_2_6_MASK, val) * mult;
3236 	wm[3] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_3_7_MASK, val) * mult;
3237 
3238 	/* read the second set of memory latencies[4:7] */
3239 	val = 1; /* data0 to be programmed to 1 for second set */
3240 	ret = snb_pcode_read(&i915->uncore, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL);
3241 	if (ret) {
3242 		drm_err(&i915->drm, "SKL Mailbox read error = %d\n", ret);
3243 		return;
3244 	}
3245 
3246 	wm[4] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_0_4_MASK, val) * mult;
3247 	wm[5] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_1_5_MASK, val) * mult;
3248 	wm[6] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_2_6_MASK, val) * mult;
3249 	wm[7] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_3_7_MASK, val) * mult;
3250 
3251 	adjust_wm_latency(i915, wm, max_level, read_latency);
3252 }
3253 
3254 static void skl_setup_wm_latency(struct drm_i915_private *i915)
3255 {
3256 	if (DISPLAY_VER(i915) >= 14)
3257 		mtl_read_wm_latency(i915, i915->display.wm.skl_latency);
3258 	else
3259 		skl_read_wm_latency(i915, i915->display.wm.skl_latency);
3260 
3261 	intel_print_wm_latency(i915, "Gen9 Plane", i915->display.wm.skl_latency);
3262 }
3263 
3264 static const struct intel_wm_funcs skl_wm_funcs = {
3265 	.compute_global_watermarks = skl_compute_wm,
3266 };
3267 
3268 void skl_wm_init(struct drm_i915_private *i915)
3269 {
3270 	intel_sagv_init(i915);
3271 
3272 	skl_setup_wm_latency(i915);
3273 
3274 	i915->display.funcs.wm = &skl_wm_funcs;
3275 }
3276 
3277 static struct intel_global_state *intel_dbuf_duplicate_state(struct intel_global_obj *obj)
3278 {
3279 	struct intel_dbuf_state *dbuf_state;
3280 
3281 	dbuf_state = kmemdup(obj->state, sizeof(*dbuf_state), GFP_KERNEL);
3282 	if (!dbuf_state)
3283 		return NULL;
3284 
3285 	return &dbuf_state->base;
3286 }
3287 
3288 static void intel_dbuf_destroy_state(struct intel_global_obj *obj,
3289 				     struct intel_global_state *state)
3290 {
3291 	kfree(state);
3292 }
3293 
3294 static const struct intel_global_state_funcs intel_dbuf_funcs = {
3295 	.atomic_duplicate_state = intel_dbuf_duplicate_state,
3296 	.atomic_destroy_state = intel_dbuf_destroy_state,
3297 };
3298 
3299 struct intel_dbuf_state *
3300 intel_atomic_get_dbuf_state(struct intel_atomic_state *state)
3301 {
3302 	struct drm_i915_private *i915 = to_i915(state->base.dev);
3303 	struct intel_global_state *dbuf_state;
3304 
3305 	dbuf_state = intel_atomic_get_global_obj_state(state, &i915->display.dbuf.obj);
3306 	if (IS_ERR(dbuf_state))
3307 		return ERR_CAST(dbuf_state);
3308 
3309 	return to_intel_dbuf_state(dbuf_state);
3310 }
3311 
3312 int intel_dbuf_init(struct drm_i915_private *i915)
3313 {
3314 	struct intel_dbuf_state *dbuf_state;
3315 
3316 	dbuf_state = kzalloc(sizeof(*dbuf_state), GFP_KERNEL);
3317 	if (!dbuf_state)
3318 		return -ENOMEM;
3319 
3320 	intel_atomic_global_obj_init(i915, &i915->display.dbuf.obj,
3321 				     &dbuf_state->base, &intel_dbuf_funcs);
3322 
3323 	return 0;
3324 }
3325 
3326 /*
3327  * Configure MBUS_CTL and all DBUF_CTL_S of each slice to join_mbus state before
3328  * update the request state of all DBUS slices.
3329  */
3330 static void update_mbus_pre_enable(struct intel_atomic_state *state)
3331 {
3332 	struct drm_i915_private *i915 = to_i915(state->base.dev);
3333 	u32 mbus_ctl, dbuf_min_tracker_val;
3334 	enum dbuf_slice slice;
3335 	const struct intel_dbuf_state *dbuf_state =
3336 		intel_atomic_get_new_dbuf_state(state);
3337 
3338 	if (!HAS_MBUS_JOINING(i915))
3339 		return;
3340 
3341 	/*
3342 	 * TODO: Implement vblank synchronized MBUS joining changes.
3343 	 * Must be properly coordinated with dbuf reprogramming.
3344 	 */
3345 	if (dbuf_state->joined_mbus) {
3346 		mbus_ctl = MBUS_HASHING_MODE_1x4 | MBUS_JOIN |
3347 			MBUS_JOIN_PIPE_SELECT_NONE;
3348 		dbuf_min_tracker_val = DBUF_MIN_TRACKER_STATE_SERVICE(3);
3349 	} else {
3350 		mbus_ctl = MBUS_HASHING_MODE_2x2 |
3351 			MBUS_JOIN_PIPE_SELECT_NONE;
3352 		dbuf_min_tracker_val = DBUF_MIN_TRACKER_STATE_SERVICE(1);
3353 	}
3354 
3355 	intel_de_rmw(i915, MBUS_CTL,
3356 		     MBUS_HASHING_MODE_MASK | MBUS_JOIN |
3357 		     MBUS_JOIN_PIPE_SELECT_MASK, mbus_ctl);
3358 
3359 	for_each_dbuf_slice(i915, slice)
3360 		intel_de_rmw(i915, DBUF_CTL_S(slice),
3361 			     DBUF_MIN_TRACKER_STATE_SERVICE_MASK,
3362 			     dbuf_min_tracker_val);
3363 }
3364 
3365 void intel_dbuf_pre_plane_update(struct intel_atomic_state *state)
3366 {
3367 	struct drm_i915_private *i915 = to_i915(state->base.dev);
3368 	const struct intel_dbuf_state *new_dbuf_state =
3369 		intel_atomic_get_new_dbuf_state(state);
3370 	const struct intel_dbuf_state *old_dbuf_state =
3371 		intel_atomic_get_old_dbuf_state(state);
3372 
3373 	if (!new_dbuf_state ||
3374 	    (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices &&
3375 	     new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus))
3376 		return;
3377 
3378 	WARN_ON(!new_dbuf_state->base.changed);
3379 
3380 	update_mbus_pre_enable(state);
3381 	gen9_dbuf_slices_update(i915,
3382 				old_dbuf_state->enabled_slices |
3383 				new_dbuf_state->enabled_slices);
3384 }
3385 
3386 void intel_dbuf_post_plane_update(struct intel_atomic_state *state)
3387 {
3388 	struct drm_i915_private *i915 = to_i915(state->base.dev);
3389 	const struct intel_dbuf_state *new_dbuf_state =
3390 		intel_atomic_get_new_dbuf_state(state);
3391 	const struct intel_dbuf_state *old_dbuf_state =
3392 		intel_atomic_get_old_dbuf_state(state);
3393 
3394 	if (!new_dbuf_state ||
3395 	    (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices &&
3396 	     new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus))
3397 		return;
3398 
3399 	WARN_ON(!new_dbuf_state->base.changed);
3400 
3401 	gen9_dbuf_slices_update(i915,
3402 				new_dbuf_state->enabled_slices);
3403 }
3404 
3405 static bool xelpdp_is_only_pipe_per_dbuf_bank(enum pipe pipe, u8 active_pipes)
3406 {
3407 	switch (pipe) {
3408 	case PIPE_A:
3409 		return !(active_pipes & BIT(PIPE_D));
3410 	case PIPE_D:
3411 		return !(active_pipes & BIT(PIPE_A));
3412 	case PIPE_B:
3413 		return !(active_pipes & BIT(PIPE_C));
3414 	case PIPE_C:
3415 		return !(active_pipes & BIT(PIPE_B));
3416 	default: /* to suppress compiler warning */
3417 		MISSING_CASE(pipe);
3418 		break;
3419 	}
3420 
3421 	return false;
3422 }
3423 
3424 void intel_mbus_dbox_update(struct intel_atomic_state *state)
3425 {
3426 	struct drm_i915_private *i915 = to_i915(state->base.dev);
3427 	const struct intel_dbuf_state *new_dbuf_state, *old_dbuf_state;
3428 	const struct intel_crtc_state *new_crtc_state;
3429 	const struct intel_crtc *crtc;
3430 	u32 val = 0;
3431 	int i;
3432 
3433 	if (DISPLAY_VER(i915) < 11)
3434 		return;
3435 
3436 	new_dbuf_state = intel_atomic_get_new_dbuf_state(state);
3437 	old_dbuf_state = intel_atomic_get_old_dbuf_state(state);
3438 	if (!new_dbuf_state ||
3439 	    (new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus &&
3440 	     new_dbuf_state->active_pipes == old_dbuf_state->active_pipes))
3441 		return;
3442 
3443 	if (DISPLAY_VER(i915) >= 14)
3444 		val |= MBUS_DBOX_I_CREDIT(2);
3445 
3446 	if (DISPLAY_VER(i915) >= 12) {
3447 		val |= MBUS_DBOX_B2B_TRANSACTIONS_MAX(16);
3448 		val |= MBUS_DBOX_B2B_TRANSACTIONS_DELAY(1);
3449 		val |= MBUS_DBOX_REGULATE_B2B_TRANSACTIONS_EN;
3450 	}
3451 
3452 	if (DISPLAY_VER(i915) >= 14)
3453 		val |= new_dbuf_state->joined_mbus ? MBUS_DBOX_A_CREDIT(12) :
3454 						     MBUS_DBOX_A_CREDIT(8);
3455 	else if (IS_ALDERLAKE_P(i915))
3456 		/* Wa_22010947358:adl-p */
3457 		val |= new_dbuf_state->joined_mbus ? MBUS_DBOX_A_CREDIT(6) :
3458 						     MBUS_DBOX_A_CREDIT(4);
3459 	else
3460 		val |= MBUS_DBOX_A_CREDIT(2);
3461 
3462 	if (DISPLAY_VER(i915) >= 14) {
3463 		val |= MBUS_DBOX_B_CREDIT(0xA);
3464 	} else if (IS_ALDERLAKE_P(i915)) {
3465 		val |= MBUS_DBOX_BW_CREDIT(2);
3466 		val |= MBUS_DBOX_B_CREDIT(8);
3467 	} else if (DISPLAY_VER(i915) >= 12) {
3468 		val |= MBUS_DBOX_BW_CREDIT(2);
3469 		val |= MBUS_DBOX_B_CREDIT(12);
3470 	} else {
3471 		val |= MBUS_DBOX_BW_CREDIT(1);
3472 		val |= MBUS_DBOX_B_CREDIT(8);
3473 	}
3474 
3475 	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
3476 		u32 pipe_val = val;
3477 
3478 		if (!new_crtc_state->hw.active)
3479 			continue;
3480 
3481 		if (DISPLAY_VER(i915) >= 14) {
3482 			if (xelpdp_is_only_pipe_per_dbuf_bank(crtc->pipe,
3483 							      new_dbuf_state->active_pipes))
3484 				pipe_val |= MBUS_DBOX_BW_8CREDITS_MTL;
3485 			else
3486 				pipe_val |= MBUS_DBOX_BW_4CREDITS_MTL;
3487 		}
3488 
3489 		intel_de_write(i915, PIPE_MBUS_DBOX_CTL(crtc->pipe), pipe_val);
3490 	}
3491 }
3492 
3493 static int skl_watermark_ipc_status_show(struct seq_file *m, void *data)
3494 {
3495 	struct drm_i915_private *i915 = m->private;
3496 
3497 	seq_printf(m, "Isochronous Priority Control: %s\n",
3498 		   str_yes_no(skl_watermark_ipc_enabled(i915)));
3499 	return 0;
3500 }
3501 
3502 static int skl_watermark_ipc_status_open(struct inode *inode, struct file *file)
3503 {
3504 	struct drm_i915_private *i915 = inode->i_private;
3505 
3506 	return single_open(file, skl_watermark_ipc_status_show, i915);
3507 }
3508 
3509 static ssize_t skl_watermark_ipc_status_write(struct file *file,
3510 					      const char __user *ubuf,
3511 					      size_t len, loff_t *offp)
3512 {
3513 	struct seq_file *m = file->private_data;
3514 	struct drm_i915_private *i915 = m->private;
3515 	intel_wakeref_t wakeref;
3516 	bool enable;
3517 	int ret;
3518 
3519 	ret = kstrtobool_from_user(ubuf, len, &enable);
3520 	if (ret < 0)
3521 		return ret;
3522 
3523 	with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
3524 		if (!skl_watermark_ipc_enabled(i915) && enable)
3525 			drm_info(&i915->drm,
3526 				 "Enabling IPC: WM will be proper only after next commit\n");
3527 		i915->display.wm.ipc_enabled = enable;
3528 		skl_watermark_ipc_update(i915);
3529 	}
3530 
3531 	return len;
3532 }
3533 
3534 static const struct file_operations skl_watermark_ipc_status_fops = {
3535 	.owner = THIS_MODULE,
3536 	.open = skl_watermark_ipc_status_open,
3537 	.read = seq_read,
3538 	.llseek = seq_lseek,
3539 	.release = single_release,
3540 	.write = skl_watermark_ipc_status_write
3541 };
3542 
3543 void skl_watermark_ipc_debugfs_register(struct drm_i915_private *i915)
3544 {
3545 	struct drm_minor *minor = i915->drm.primary;
3546 
3547 	if (!HAS_IPC(i915))
3548 		return;
3549 
3550 	debugfs_create_file("i915_ipc_status", 0644, minor->debugfs_root, i915,
3551 			    &skl_watermark_ipc_status_fops);
3552 }
3553