1 /* 2 * Copyright 2006 Dave Airlie <airlied@linux.ie> 3 * Copyright © 2006-2007 Intel Corporation 4 * 5 * Permission is hereby granted, free of charge, to any person obtaining a 6 * copy of this software and associated documentation files (the "Software"), 7 * to deal in the Software without restriction, including without limitation 8 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 9 * and/or sell copies of the Software, and to permit persons to whom the 10 * Software is furnished to do so, subject to the following conditions: 11 * 12 * The above copyright notice and this permission notice (including the next 13 * paragraph) shall be included in all copies or substantial portions of the 14 * Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 21 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 22 * DEALINGS IN THE SOFTWARE. 23 * 24 * Authors: 25 * Eric Anholt <eric@anholt.net> 26 */ 27 28 #include <linux/i2c.h> 29 #include <linux/slab.h> 30 31 #include <drm/drm_atomic_helper.h> 32 #include <drm/drm_crtc.h> 33 #include <drm/i915_drm.h> 34 35 #include "i915_drv.h" 36 #include "intel_connector.h" 37 #include "intel_display_types.h" 38 #include "intel_dvo.h" 39 #include "intel_dvo_dev.h" 40 #include "intel_gmbus.h" 41 #include "intel_panel.h" 42 43 #define INTEL_DVO_CHIP_NONE 0 44 #define INTEL_DVO_CHIP_LVDS 1 45 #define INTEL_DVO_CHIP_TMDS 2 46 #define INTEL_DVO_CHIP_TVOUT 4 47 48 #define SIL164_ADDR 0x38 49 #define CH7xxx_ADDR 0x76 50 #define TFP410_ADDR 0x38 51 #define NS2501_ADDR 0x38 52 53 static const struct intel_dvo_device intel_dvo_devices[] = { 54 { 55 .type = INTEL_DVO_CHIP_TMDS, 56 .name = "sil164", 57 .dvo_reg = DVOC, 58 .dvo_srcdim_reg = DVOC_SRCDIM, 59 .slave_addr = SIL164_ADDR, 60 .dev_ops = &sil164_ops, 61 }, 62 { 63 .type = INTEL_DVO_CHIP_TMDS, 64 .name = "ch7xxx", 65 .dvo_reg = DVOC, 66 .dvo_srcdim_reg = DVOC_SRCDIM, 67 .slave_addr = CH7xxx_ADDR, 68 .dev_ops = &ch7xxx_ops, 69 }, 70 { 71 .type = INTEL_DVO_CHIP_TMDS, 72 .name = "ch7xxx", 73 .dvo_reg = DVOC, 74 .dvo_srcdim_reg = DVOC_SRCDIM, 75 .slave_addr = 0x75, /* For some ch7010 */ 76 .dev_ops = &ch7xxx_ops, 77 }, 78 { 79 .type = INTEL_DVO_CHIP_LVDS, 80 .name = "ivch", 81 .dvo_reg = DVOA, 82 .dvo_srcdim_reg = DVOA_SRCDIM, 83 .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ 84 .dev_ops = &ivch_ops, 85 }, 86 { 87 .type = INTEL_DVO_CHIP_TMDS, 88 .name = "tfp410", 89 .dvo_reg = DVOC, 90 .dvo_srcdim_reg = DVOC_SRCDIM, 91 .slave_addr = TFP410_ADDR, 92 .dev_ops = &tfp410_ops, 93 }, 94 { 95 .type = INTEL_DVO_CHIP_LVDS, 96 .name = "ch7017", 97 .dvo_reg = DVOC, 98 .dvo_srcdim_reg = DVOC_SRCDIM, 99 .slave_addr = 0x75, 100 .gpio = GMBUS_PIN_DPB, 101 .dev_ops = &ch7017_ops, 102 }, 103 { 104 .type = INTEL_DVO_CHIP_TMDS, 105 .name = "ns2501", 106 .dvo_reg = DVOB, 107 .dvo_srcdim_reg = DVOB_SRCDIM, 108 .slave_addr = NS2501_ADDR, 109 .dev_ops = &ns2501_ops, 110 } 111 }; 112 113 struct intel_dvo { 114 struct intel_encoder base; 115 116 struct intel_dvo_device dev; 117 118 struct intel_connector *attached_connector; 119 120 bool panel_wants_dither; 121 }; 122 123 static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder) 124 { 125 return container_of(encoder, struct intel_dvo, base); 126 } 127 128 static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector) 129 { 130 return enc_to_dvo(intel_attached_encoder(connector)); 131 } 132 133 static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector) 134 { 135 struct drm_device *dev = connector->base.dev; 136 struct drm_i915_private *dev_priv = to_i915(dev); 137 struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base); 138 u32 tmp; 139 140 tmp = I915_READ(intel_dvo->dev.dvo_reg); 141 142 if (!(tmp & DVO_ENABLE)) 143 return false; 144 145 return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev); 146 } 147 148 static bool intel_dvo_get_hw_state(struct intel_encoder *encoder, 149 enum pipe *pipe) 150 { 151 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 152 struct intel_dvo *intel_dvo = enc_to_dvo(encoder); 153 u32 tmp; 154 155 tmp = I915_READ(intel_dvo->dev.dvo_reg); 156 157 *pipe = (tmp & DVO_PIPE_SEL_MASK) >> DVO_PIPE_SEL_SHIFT; 158 159 return tmp & DVO_ENABLE; 160 } 161 162 static void intel_dvo_get_config(struct intel_encoder *encoder, 163 struct intel_crtc_state *pipe_config) 164 { 165 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 166 struct intel_dvo *intel_dvo = enc_to_dvo(encoder); 167 u32 tmp, flags = 0; 168 169 pipe_config->output_types |= BIT(INTEL_OUTPUT_DVO); 170 171 tmp = I915_READ(intel_dvo->dev.dvo_reg); 172 if (tmp & DVO_HSYNC_ACTIVE_HIGH) 173 flags |= DRM_MODE_FLAG_PHSYNC; 174 else 175 flags |= DRM_MODE_FLAG_NHSYNC; 176 if (tmp & DVO_VSYNC_ACTIVE_HIGH) 177 flags |= DRM_MODE_FLAG_PVSYNC; 178 else 179 flags |= DRM_MODE_FLAG_NVSYNC; 180 181 pipe_config->base.adjusted_mode.flags |= flags; 182 183 pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock; 184 } 185 186 static void intel_disable_dvo(struct intel_encoder *encoder, 187 const struct intel_crtc_state *old_crtc_state, 188 const struct drm_connector_state *old_conn_state) 189 { 190 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 191 struct intel_dvo *intel_dvo = enc_to_dvo(encoder); 192 i915_reg_t dvo_reg = intel_dvo->dev.dvo_reg; 193 u32 temp = I915_READ(dvo_reg); 194 195 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false); 196 I915_WRITE(dvo_reg, temp & ~DVO_ENABLE); 197 I915_READ(dvo_reg); 198 } 199 200 static void intel_enable_dvo(struct intel_encoder *encoder, 201 const struct intel_crtc_state *pipe_config, 202 const struct drm_connector_state *conn_state) 203 { 204 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 205 struct intel_dvo *intel_dvo = enc_to_dvo(encoder); 206 i915_reg_t dvo_reg = intel_dvo->dev.dvo_reg; 207 u32 temp = I915_READ(dvo_reg); 208 209 intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev, 210 &pipe_config->base.mode, 211 &pipe_config->base.adjusted_mode); 212 213 I915_WRITE(dvo_reg, temp | DVO_ENABLE); 214 I915_READ(dvo_reg); 215 216 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true); 217 } 218 219 static enum drm_mode_status 220 intel_dvo_mode_valid(struct drm_connector *connector, 221 struct drm_display_mode *mode) 222 { 223 struct intel_dvo *intel_dvo = intel_attached_dvo(connector); 224 const struct drm_display_mode *fixed_mode = 225 to_intel_connector(connector)->panel.fixed_mode; 226 int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; 227 int target_clock = mode->clock; 228 229 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) 230 return MODE_NO_DBLESCAN; 231 232 /* XXX: Validate clock range */ 233 234 if (fixed_mode) { 235 if (mode->hdisplay > fixed_mode->hdisplay) 236 return MODE_PANEL; 237 if (mode->vdisplay > fixed_mode->vdisplay) 238 return MODE_PANEL; 239 240 target_clock = fixed_mode->clock; 241 } 242 243 if (target_clock > max_dotclk) 244 return MODE_CLOCK_HIGH; 245 246 return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode); 247 } 248 249 static int intel_dvo_compute_config(struct intel_encoder *encoder, 250 struct intel_crtc_state *pipe_config, 251 struct drm_connector_state *conn_state) 252 { 253 struct intel_dvo *intel_dvo = enc_to_dvo(encoder); 254 const struct drm_display_mode *fixed_mode = 255 intel_dvo->attached_connector->panel.fixed_mode; 256 struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; 257 258 /* 259 * If we have timings from the BIOS for the panel, put them in 260 * to the adjusted mode. The CRTC will be set up for this mode, 261 * with the panel scaling set up to source from the H/VDisplay 262 * of the original mode. 263 */ 264 if (fixed_mode) 265 intel_fixed_panel_mode(fixed_mode, adjusted_mode); 266 267 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 268 return -EINVAL; 269 270 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; 271 272 return 0; 273 } 274 275 static void intel_dvo_pre_enable(struct intel_encoder *encoder, 276 const struct intel_crtc_state *pipe_config, 277 const struct drm_connector_state *conn_state) 278 { 279 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 280 struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc); 281 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; 282 struct intel_dvo *intel_dvo = enc_to_dvo(encoder); 283 int pipe = crtc->pipe; 284 u32 dvo_val; 285 i915_reg_t dvo_reg = intel_dvo->dev.dvo_reg; 286 i915_reg_t dvo_srcdim_reg = intel_dvo->dev.dvo_srcdim_reg; 287 288 /* Save the data order, since I don't know what it should be set to. */ 289 dvo_val = I915_READ(dvo_reg) & 290 (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG); 291 dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE | 292 DVO_BLANK_ACTIVE_HIGH; 293 294 dvo_val |= DVO_PIPE_SEL(pipe); 295 dvo_val |= DVO_PIPE_STALL; 296 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) 297 dvo_val |= DVO_HSYNC_ACTIVE_HIGH; 298 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) 299 dvo_val |= DVO_VSYNC_ACTIVE_HIGH; 300 301 /*I915_WRITE(DVOB_SRCDIM, 302 (adjusted_mode->crtc_hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | 303 (adjusted_mode->crtc_vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/ 304 I915_WRITE(dvo_srcdim_reg, 305 (adjusted_mode->crtc_hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | 306 (adjusted_mode->crtc_vdisplay << DVO_SRCDIM_VERTICAL_SHIFT)); 307 /*I915_WRITE(DVOB, dvo_val);*/ 308 I915_WRITE(dvo_reg, dvo_val); 309 } 310 311 static enum drm_connector_status 312 intel_dvo_detect(struct drm_connector *connector, bool force) 313 { 314 struct intel_dvo *intel_dvo = intel_attached_dvo(connector); 315 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", 316 connector->base.id, connector->name); 317 return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev); 318 } 319 320 static int intel_dvo_get_modes(struct drm_connector *connector) 321 { 322 struct drm_i915_private *dev_priv = to_i915(connector->dev); 323 const struct drm_display_mode *fixed_mode = 324 to_intel_connector(connector)->panel.fixed_mode; 325 326 /* 327 * We should probably have an i2c driver get_modes function for those 328 * devices which will have a fixed set of modes determined by the chip 329 * (TV-out, for example), but for now with just TMDS and LVDS, 330 * that's not the case. 331 */ 332 intel_ddc_get_modes(connector, 333 intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPC)); 334 if (!list_empty(&connector->probed_modes)) 335 return 1; 336 337 if (fixed_mode) { 338 struct drm_display_mode *mode; 339 mode = drm_mode_duplicate(connector->dev, fixed_mode); 340 if (mode) { 341 drm_mode_probed_add(connector, mode); 342 return 1; 343 } 344 } 345 346 return 0; 347 } 348 349 static const struct drm_connector_funcs intel_dvo_connector_funcs = { 350 .detect = intel_dvo_detect, 351 .late_register = intel_connector_register, 352 .early_unregister = intel_connector_unregister, 353 .destroy = intel_connector_destroy, 354 .fill_modes = drm_helper_probe_single_connector_modes, 355 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, 356 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, 357 }; 358 359 static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = { 360 .mode_valid = intel_dvo_mode_valid, 361 .get_modes = intel_dvo_get_modes, 362 }; 363 364 static void intel_dvo_enc_destroy(struct drm_encoder *encoder) 365 { 366 struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder)); 367 368 if (intel_dvo->dev.dev_ops->destroy) 369 intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev); 370 371 intel_encoder_destroy(encoder); 372 } 373 374 static const struct drm_encoder_funcs intel_dvo_enc_funcs = { 375 .destroy = intel_dvo_enc_destroy, 376 }; 377 378 /* 379 * Attempts to get a fixed panel timing for LVDS (currently only the i830). 380 * 381 * Other chips with DVO LVDS will need to extend this to deal with the LVDS 382 * chip being on DVOB/C and having multiple pipes. 383 */ 384 static struct drm_display_mode * 385 intel_dvo_get_current_mode(struct intel_encoder *encoder) 386 { 387 struct drm_display_mode *mode; 388 389 mode = intel_encoder_current_mode(encoder); 390 if (mode) { 391 DRM_DEBUG_KMS("using current (BIOS) mode: "); 392 drm_mode_debug_printmodeline(mode); 393 mode->type |= DRM_MODE_TYPE_PREFERRED; 394 } 395 396 return mode; 397 } 398 399 static enum port intel_dvo_port(i915_reg_t dvo_reg) 400 { 401 if (i915_mmio_reg_equal(dvo_reg, DVOA)) 402 return PORT_A; 403 else if (i915_mmio_reg_equal(dvo_reg, DVOB)) 404 return PORT_B; 405 else 406 return PORT_C; 407 } 408 409 void intel_dvo_init(struct drm_i915_private *dev_priv) 410 { 411 struct intel_encoder *intel_encoder; 412 struct intel_dvo *intel_dvo; 413 struct intel_connector *intel_connector; 414 int i; 415 int encoder_type = DRM_MODE_ENCODER_NONE; 416 417 intel_dvo = kzalloc(sizeof(*intel_dvo), GFP_KERNEL); 418 if (!intel_dvo) 419 return; 420 421 intel_connector = intel_connector_alloc(); 422 if (!intel_connector) { 423 kfree(intel_dvo); 424 return; 425 } 426 427 intel_dvo->attached_connector = intel_connector; 428 429 intel_encoder = &intel_dvo->base; 430 431 intel_encoder->disable = intel_disable_dvo; 432 intel_encoder->enable = intel_enable_dvo; 433 intel_encoder->get_hw_state = intel_dvo_get_hw_state; 434 intel_encoder->get_config = intel_dvo_get_config; 435 intel_encoder->compute_config = intel_dvo_compute_config; 436 intel_encoder->pre_enable = intel_dvo_pre_enable; 437 intel_connector->get_hw_state = intel_dvo_connector_get_hw_state; 438 439 /* Now, try to find a controller */ 440 for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) { 441 struct drm_connector *connector = &intel_connector->base; 442 const struct intel_dvo_device *dvo = &intel_dvo_devices[i]; 443 struct i2c_adapter *i2c; 444 int gpio; 445 bool dvoinit; 446 enum pipe pipe; 447 u32 dpll[I915_MAX_PIPES]; 448 enum port port; 449 450 /* 451 * Allow the I2C driver info to specify the GPIO to be used in 452 * special cases, but otherwise default to what's defined 453 * in the spec. 454 */ 455 if (intel_gmbus_is_valid_pin(dev_priv, dvo->gpio)) 456 gpio = dvo->gpio; 457 else if (dvo->type == INTEL_DVO_CHIP_LVDS) 458 gpio = GMBUS_PIN_SSC; 459 else 460 gpio = GMBUS_PIN_DPB; 461 462 /* 463 * Set up the I2C bus necessary for the chip we're probing. 464 * It appears that everything is on GPIOE except for panels 465 * on i830 laptops, which are on GPIOB (DVOA). 466 */ 467 i2c = intel_gmbus_get_adapter(dev_priv, gpio); 468 469 intel_dvo->dev = *dvo; 470 471 /* 472 * GMBUS NAK handling seems to be unstable, hence let the 473 * transmitter detection run in bit banging mode for now. 474 */ 475 intel_gmbus_force_bit(i2c, true); 476 477 /* 478 * ns2501 requires the DVO 2x clock before it will 479 * respond to i2c accesses, so make sure we have 480 * have the clock enabled before we attempt to 481 * initialize the device. 482 */ 483 for_each_pipe(dev_priv, pipe) { 484 dpll[pipe] = I915_READ(DPLL(pipe)); 485 I915_WRITE(DPLL(pipe), dpll[pipe] | DPLL_DVO_2X_MODE); 486 } 487 488 dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c); 489 490 /* restore the DVO 2x clock state to original */ 491 for_each_pipe(dev_priv, pipe) { 492 I915_WRITE(DPLL(pipe), dpll[pipe]); 493 } 494 495 intel_gmbus_force_bit(i2c, false); 496 497 if (!dvoinit) 498 continue; 499 500 port = intel_dvo_port(dvo->dvo_reg); 501 drm_encoder_init(&dev_priv->drm, &intel_encoder->base, 502 &intel_dvo_enc_funcs, encoder_type, 503 "DVO %c", port_name(port)); 504 505 intel_encoder->type = INTEL_OUTPUT_DVO; 506 intel_encoder->power_domain = POWER_DOMAIN_PORT_OTHER; 507 intel_encoder->port = port; 508 intel_encoder->crtc_mask = (1 << 0) | (1 << 1); 509 510 switch (dvo->type) { 511 case INTEL_DVO_CHIP_TMDS: 512 intel_encoder->cloneable = (1 << INTEL_OUTPUT_ANALOG) | 513 (1 << INTEL_OUTPUT_DVO); 514 drm_connector_init(&dev_priv->drm, connector, 515 &intel_dvo_connector_funcs, 516 DRM_MODE_CONNECTOR_DVII); 517 encoder_type = DRM_MODE_ENCODER_TMDS; 518 break; 519 case INTEL_DVO_CHIP_LVDS: 520 intel_encoder->cloneable = 0; 521 drm_connector_init(&dev_priv->drm, connector, 522 &intel_dvo_connector_funcs, 523 DRM_MODE_CONNECTOR_LVDS); 524 encoder_type = DRM_MODE_ENCODER_LVDS; 525 break; 526 } 527 528 drm_connector_helper_add(connector, 529 &intel_dvo_connector_helper_funcs); 530 connector->display_info.subpixel_order = SubPixelHorizontalRGB; 531 connector->interlace_allowed = false; 532 connector->doublescan_allowed = false; 533 534 intel_connector_attach_encoder(intel_connector, intel_encoder); 535 if (dvo->type == INTEL_DVO_CHIP_LVDS) { 536 /* 537 * For our LVDS chipsets, we should hopefully be able 538 * to dig the fixed panel mode out of the BIOS data. 539 * However, it's in a different format from the BIOS 540 * data on chipsets with integrated LVDS (stored in AIM 541 * headers, likely), so for now, just get the current 542 * mode being output through DVO. 543 */ 544 intel_panel_init(&intel_connector->panel, 545 intel_dvo_get_current_mode(intel_encoder), 546 NULL); 547 intel_dvo->panel_wants_dither = true; 548 } 549 550 return; 551 } 552 553 kfree(intel_dvo); 554 kfree(intel_connector); 555 } 556