1 /* 2 * Copyright © 2014 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Author: Shobhit Kumar <shobhit.kumar@intel.com> 24 * 25 */ 26 27 #include <linux/gpio/consumer.h> 28 #include <linux/gpio/machine.h> 29 #include <linux/mfd/intel_soc_pmic.h> 30 #include <linux/pinctrl/consumer.h> 31 #include <linux/pinctrl/machine.h> 32 #include <linux/slab.h> 33 #include <linux/string_helpers.h> 34 35 #include <asm/unaligned.h> 36 37 #include <drm/drm_crtc.h> 38 #include <drm/drm_edid.h> 39 40 #include <video/mipi_display.h> 41 42 #include "i915_drv.h" 43 #include "i915_reg.h" 44 #include "intel_display_types.h" 45 #include "intel_dsi.h" 46 #include "intel_dsi_vbt.h" 47 #include "vlv_dsi.h" 48 #include "vlv_dsi_regs.h" 49 #include "vlv_sideband.h" 50 51 #define MIPI_TRANSFER_MODE_SHIFT 0 52 #define MIPI_VIRTUAL_CHANNEL_SHIFT 1 53 #define MIPI_PORT_SHIFT 3 54 55 /* base offsets for gpio pads */ 56 #define VLV_GPIO_NC_0_HV_DDI0_HPD 0x4130 57 #define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA 0x4120 58 #define VLV_GPIO_NC_2_HV_DDI0_DDC_SCL 0x4110 59 #define VLV_GPIO_NC_3_PANEL0_VDDEN 0x4140 60 #define VLV_GPIO_NC_4_PANEL0_BKLTEN 0x4150 61 #define VLV_GPIO_NC_5_PANEL0_BKLTCTL 0x4160 62 #define VLV_GPIO_NC_6_HV_DDI1_HPD 0x4180 63 #define VLV_GPIO_NC_7_HV_DDI1_DDC_SDA 0x4190 64 #define VLV_GPIO_NC_8_HV_DDI1_DDC_SCL 0x4170 65 #define VLV_GPIO_NC_9_PANEL1_VDDEN 0x4100 66 #define VLV_GPIO_NC_10_PANEL1_BKLTEN 0x40E0 67 #define VLV_GPIO_NC_11_PANEL1_BKLTCTL 0x40F0 68 69 #define VLV_GPIO_PCONF0(base_offset) (base_offset) 70 #define VLV_GPIO_PAD_VAL(base_offset) ((base_offset) + 8) 71 72 struct gpio_map { 73 u16 base_offset; 74 bool init; 75 }; 76 77 static struct gpio_map vlv_gpio_table[] = { 78 { VLV_GPIO_NC_0_HV_DDI0_HPD }, 79 { VLV_GPIO_NC_1_HV_DDI0_DDC_SDA }, 80 { VLV_GPIO_NC_2_HV_DDI0_DDC_SCL }, 81 { VLV_GPIO_NC_3_PANEL0_VDDEN }, 82 { VLV_GPIO_NC_4_PANEL0_BKLTEN }, 83 { VLV_GPIO_NC_5_PANEL0_BKLTCTL }, 84 { VLV_GPIO_NC_6_HV_DDI1_HPD }, 85 { VLV_GPIO_NC_7_HV_DDI1_DDC_SDA }, 86 { VLV_GPIO_NC_8_HV_DDI1_DDC_SCL }, 87 { VLV_GPIO_NC_9_PANEL1_VDDEN }, 88 { VLV_GPIO_NC_10_PANEL1_BKLTEN }, 89 { VLV_GPIO_NC_11_PANEL1_BKLTCTL }, 90 }; 91 92 struct i2c_adapter_lookup { 93 u16 slave_addr; 94 struct intel_dsi *intel_dsi; 95 acpi_handle dev_handle; 96 }; 97 98 #define CHV_GPIO_IDX_START_N 0 99 #define CHV_GPIO_IDX_START_E 73 100 #define CHV_GPIO_IDX_START_SW 100 101 #define CHV_GPIO_IDX_START_SE 198 102 103 #define CHV_VBT_MAX_PINS_PER_FMLY 15 104 105 #define CHV_GPIO_PAD_CFG0(f, i) (0x4400 + (f) * 0x400 + (i) * 8) 106 #define CHV_GPIO_GPIOEN (1 << 15) 107 #define CHV_GPIO_GPIOCFG_GPIO (0 << 8) 108 #define CHV_GPIO_GPIOCFG_GPO (1 << 8) 109 #define CHV_GPIO_GPIOCFG_GPI (2 << 8) 110 #define CHV_GPIO_GPIOCFG_HIZ (3 << 8) 111 #define CHV_GPIO_GPIOTXSTATE(state) ((!!(state)) << 1) 112 113 #define CHV_GPIO_PAD_CFG1(f, i) (0x4400 + (f) * 0x400 + (i) * 8 + 4) 114 #define CHV_GPIO_CFGLOCK (1 << 31) 115 116 /* ICL DSI Display GPIO Pins */ 117 #define ICL_GPIO_DDSP_HPD_A 0 118 #define ICL_GPIO_L_VDDEN_1 1 119 #define ICL_GPIO_L_BKLTEN_1 2 120 #define ICL_GPIO_DDPA_CTRLCLK_1 3 121 #define ICL_GPIO_DDPA_CTRLDATA_1 4 122 #define ICL_GPIO_DDSP_HPD_B 5 123 #define ICL_GPIO_L_VDDEN_2 6 124 #define ICL_GPIO_L_BKLTEN_2 7 125 #define ICL_GPIO_DDPA_CTRLCLK_2 8 126 #define ICL_GPIO_DDPA_CTRLDATA_2 9 127 128 static enum port intel_dsi_seq_port_to_port(struct intel_dsi *intel_dsi, 129 u8 seq_port) 130 { 131 /* 132 * If single link DSI is being used on any port, the VBT sequence block 133 * send packet apparently always has 0 for the port. Just use the port 134 * we have configured, and ignore the sequence block port. 135 */ 136 if (hweight8(intel_dsi->ports) == 1) 137 return ffs(intel_dsi->ports) - 1; 138 139 if (seq_port) { 140 if (intel_dsi->ports & BIT(PORT_B)) 141 return PORT_B; 142 else if (intel_dsi->ports & BIT(PORT_C)) 143 return PORT_C; 144 } 145 146 return PORT_A; 147 } 148 149 static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, 150 const u8 *data) 151 { 152 struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev); 153 struct mipi_dsi_device *dsi_device; 154 u8 type, flags, seq_port; 155 u16 len; 156 enum port port; 157 158 drm_dbg_kms(&dev_priv->drm, "\n"); 159 160 flags = *data++; 161 type = *data++; 162 163 len = *((u16 *) data); 164 data += 2; 165 166 seq_port = (flags >> MIPI_PORT_SHIFT) & 3; 167 168 port = intel_dsi_seq_port_to_port(intel_dsi, seq_port); 169 170 if (drm_WARN_ON(&dev_priv->drm, !intel_dsi->dsi_hosts[port])) 171 goto out; 172 173 dsi_device = intel_dsi->dsi_hosts[port]->device; 174 if (!dsi_device) { 175 drm_dbg_kms(&dev_priv->drm, "no dsi device for port %c\n", 176 port_name(port)); 177 goto out; 178 } 179 180 if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1) 181 dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM; 182 else 183 dsi_device->mode_flags |= MIPI_DSI_MODE_LPM; 184 185 dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3; 186 187 switch (type) { 188 case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: 189 mipi_dsi_generic_write(dsi_device, NULL, 0); 190 break; 191 case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: 192 mipi_dsi_generic_write(dsi_device, data, 1); 193 break; 194 case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: 195 mipi_dsi_generic_write(dsi_device, data, 2); 196 break; 197 case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: 198 case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: 199 case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: 200 drm_dbg(&dev_priv->drm, 201 "Generic Read not yet implemented or used\n"); 202 break; 203 case MIPI_DSI_GENERIC_LONG_WRITE: 204 mipi_dsi_generic_write(dsi_device, data, len); 205 break; 206 case MIPI_DSI_DCS_SHORT_WRITE: 207 mipi_dsi_dcs_write_buffer(dsi_device, data, 1); 208 break; 209 case MIPI_DSI_DCS_SHORT_WRITE_PARAM: 210 mipi_dsi_dcs_write_buffer(dsi_device, data, 2); 211 break; 212 case MIPI_DSI_DCS_READ: 213 drm_dbg(&dev_priv->drm, 214 "DCS Read not yet implemented or used\n"); 215 break; 216 case MIPI_DSI_DCS_LONG_WRITE: 217 mipi_dsi_dcs_write_buffer(dsi_device, data, len); 218 break; 219 } 220 221 if (DISPLAY_VER(dev_priv) < 11) 222 vlv_dsi_wait_for_fifo_empty(intel_dsi, port); 223 224 out: 225 data += len; 226 227 return data; 228 } 229 230 static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data) 231 { 232 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 233 u32 delay = *((const u32 *) data); 234 235 drm_dbg_kms(&i915->drm, "\n"); 236 237 usleep_range(delay, delay + 10); 238 data += 4; 239 240 return data; 241 } 242 243 static void vlv_exec_gpio(struct intel_connector *connector, 244 u8 gpio_source, u8 gpio_index, bool value) 245 { 246 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 247 struct gpio_map *map; 248 u16 pconf0, padval; 249 u32 tmp; 250 u8 port; 251 252 if (gpio_index >= ARRAY_SIZE(vlv_gpio_table)) { 253 drm_dbg_kms(&dev_priv->drm, "unknown gpio index %u\n", 254 gpio_index); 255 return; 256 } 257 258 map = &vlv_gpio_table[gpio_index]; 259 260 if (connector->panel.vbt.dsi.seq_version >= 3) { 261 /* XXX: this assumes vlv_gpio_table only has NC GPIOs. */ 262 port = IOSF_PORT_GPIO_NC; 263 } else { 264 if (gpio_source == 0) { 265 port = IOSF_PORT_GPIO_NC; 266 } else if (gpio_source == 1) { 267 drm_dbg_kms(&dev_priv->drm, "SC gpio not supported\n"); 268 return; 269 } else { 270 drm_dbg_kms(&dev_priv->drm, 271 "unknown gpio source %u\n", gpio_source); 272 return; 273 } 274 } 275 276 pconf0 = VLV_GPIO_PCONF0(map->base_offset); 277 padval = VLV_GPIO_PAD_VAL(map->base_offset); 278 279 vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO)); 280 if (!map->init) { 281 /* FIXME: remove constant below */ 282 vlv_iosf_sb_write(dev_priv, port, pconf0, 0x2000CC00); 283 map->init = true; 284 } 285 286 tmp = 0x4 | value; 287 vlv_iosf_sb_write(dev_priv, port, padval, tmp); 288 vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO)); 289 } 290 291 static void chv_exec_gpio(struct intel_connector *connector, 292 u8 gpio_source, u8 gpio_index, bool value) 293 { 294 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 295 u16 cfg0, cfg1; 296 u16 family_num; 297 u8 port; 298 299 if (connector->panel.vbt.dsi.seq_version >= 3) { 300 if (gpio_index >= CHV_GPIO_IDX_START_SE) { 301 /* XXX: it's unclear whether 255->57 is part of SE. */ 302 gpio_index -= CHV_GPIO_IDX_START_SE; 303 port = CHV_IOSF_PORT_GPIO_SE; 304 } else if (gpio_index >= CHV_GPIO_IDX_START_SW) { 305 gpio_index -= CHV_GPIO_IDX_START_SW; 306 port = CHV_IOSF_PORT_GPIO_SW; 307 } else if (gpio_index >= CHV_GPIO_IDX_START_E) { 308 gpio_index -= CHV_GPIO_IDX_START_E; 309 port = CHV_IOSF_PORT_GPIO_E; 310 } else { 311 port = CHV_IOSF_PORT_GPIO_N; 312 } 313 } else { 314 /* XXX: The spec is unclear about CHV GPIO on seq v2 */ 315 if (gpio_source != 0) { 316 drm_dbg_kms(&dev_priv->drm, 317 "unknown gpio source %u\n", gpio_source); 318 return; 319 } 320 321 if (gpio_index >= CHV_GPIO_IDX_START_E) { 322 drm_dbg_kms(&dev_priv->drm, 323 "invalid gpio index %u for GPIO N\n", 324 gpio_index); 325 return; 326 } 327 328 port = CHV_IOSF_PORT_GPIO_N; 329 } 330 331 family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY; 332 gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY; 333 334 cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index); 335 cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index); 336 337 vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO)); 338 vlv_iosf_sb_write(dev_priv, port, cfg1, 0); 339 vlv_iosf_sb_write(dev_priv, port, cfg0, 340 CHV_GPIO_GPIOEN | CHV_GPIO_GPIOCFG_GPO | 341 CHV_GPIO_GPIOTXSTATE(value)); 342 vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO)); 343 } 344 345 static void bxt_exec_gpio(struct intel_connector *connector, 346 u8 gpio_source, u8 gpio_index, bool value) 347 { 348 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 349 /* XXX: this table is a quick ugly hack. */ 350 static struct gpio_desc *bxt_gpio_table[U8_MAX + 1]; 351 struct gpio_desc *gpio_desc = bxt_gpio_table[gpio_index]; 352 353 if (!gpio_desc) { 354 gpio_desc = devm_gpiod_get_index(dev_priv->drm.dev, 355 NULL, gpio_index, 356 value ? GPIOD_OUT_LOW : 357 GPIOD_OUT_HIGH); 358 359 if (IS_ERR_OR_NULL(gpio_desc)) { 360 drm_err(&dev_priv->drm, 361 "GPIO index %u request failed (%ld)\n", 362 gpio_index, PTR_ERR(gpio_desc)); 363 return; 364 } 365 366 bxt_gpio_table[gpio_index] = gpio_desc; 367 } 368 369 gpiod_set_value(gpio_desc, value); 370 } 371 372 static void icl_exec_gpio(struct intel_connector *connector, 373 u8 gpio_source, u8 gpio_index, bool value) 374 { 375 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 376 377 drm_dbg_kms(&dev_priv->drm, "Skipping ICL GPIO element execution\n"); 378 } 379 380 static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data) 381 { 382 struct drm_device *dev = intel_dsi->base.base.dev; 383 struct drm_i915_private *dev_priv = to_i915(dev); 384 struct intel_connector *connector = intel_dsi->attached_connector; 385 u8 gpio_source, gpio_index = 0, gpio_number; 386 bool value; 387 388 drm_dbg_kms(&dev_priv->drm, "\n"); 389 390 if (connector->panel.vbt.dsi.seq_version >= 3) 391 gpio_index = *data++; 392 393 gpio_number = *data++; 394 395 /* gpio source in sequence v2 only */ 396 if (connector->panel.vbt.dsi.seq_version == 2) 397 gpio_source = (*data >> 1) & 3; 398 else 399 gpio_source = 0; 400 401 /* pull up/down */ 402 value = *data++ & 1; 403 404 if (DISPLAY_VER(dev_priv) >= 11) 405 icl_exec_gpio(connector, gpio_source, gpio_index, value); 406 else if (IS_VALLEYVIEW(dev_priv)) 407 vlv_exec_gpio(connector, gpio_source, gpio_number, value); 408 else if (IS_CHERRYVIEW(dev_priv)) 409 chv_exec_gpio(connector, gpio_source, gpio_number, value); 410 else 411 bxt_exec_gpio(connector, gpio_source, gpio_index, value); 412 413 return data; 414 } 415 416 #ifdef CONFIG_ACPI 417 static int i2c_adapter_lookup(struct acpi_resource *ares, void *data) 418 { 419 struct i2c_adapter_lookup *lookup = data; 420 struct intel_dsi *intel_dsi = lookup->intel_dsi; 421 struct acpi_resource_i2c_serialbus *sb; 422 struct i2c_adapter *adapter; 423 acpi_handle adapter_handle; 424 acpi_status status; 425 426 if (!i2c_acpi_get_i2c_resource(ares, &sb)) 427 return 1; 428 429 if (lookup->slave_addr != sb->slave_address) 430 return 1; 431 432 status = acpi_get_handle(lookup->dev_handle, 433 sb->resource_source.string_ptr, 434 &adapter_handle); 435 if (ACPI_FAILURE(status)) 436 return 1; 437 438 adapter = i2c_acpi_find_adapter_by_handle(adapter_handle); 439 if (adapter) 440 intel_dsi->i2c_bus_num = adapter->nr; 441 442 return 1; 443 } 444 445 static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, 446 const u16 slave_addr) 447 { 448 struct drm_device *drm_dev = intel_dsi->base.base.dev; 449 struct acpi_device *adev = ACPI_COMPANION(drm_dev->dev); 450 struct i2c_adapter_lookup lookup = { 451 .slave_addr = slave_addr, 452 .intel_dsi = intel_dsi, 453 .dev_handle = acpi_device_handle(adev), 454 }; 455 LIST_HEAD(resource_list); 456 457 acpi_dev_get_resources(adev, &resource_list, i2c_adapter_lookup, &lookup); 458 acpi_dev_free_resource_list(&resource_list); 459 } 460 #else 461 static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, 462 const u16 slave_addr) 463 { 464 } 465 #endif 466 467 static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data) 468 { 469 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 470 struct i2c_adapter *adapter; 471 struct i2c_msg msg; 472 int ret; 473 u8 vbt_i2c_bus_num = *(data + 2); 474 u16 slave_addr = *(u16 *)(data + 3); 475 u8 reg_offset = *(data + 5); 476 u8 payload_size = *(data + 6); 477 u8 *payload_data; 478 479 if (intel_dsi->i2c_bus_num < 0) { 480 intel_dsi->i2c_bus_num = vbt_i2c_bus_num; 481 i2c_acpi_find_adapter(intel_dsi, slave_addr); 482 } 483 484 adapter = i2c_get_adapter(intel_dsi->i2c_bus_num); 485 if (!adapter) { 486 drm_err(&i915->drm, "Cannot find a valid i2c bus for xfer\n"); 487 goto err_bus; 488 } 489 490 payload_data = kzalloc(payload_size + 1, GFP_KERNEL); 491 if (!payload_data) 492 goto err_alloc; 493 494 payload_data[0] = reg_offset; 495 memcpy(&payload_data[1], (data + 7), payload_size); 496 497 msg.addr = slave_addr; 498 msg.flags = 0; 499 msg.len = payload_size + 1; 500 msg.buf = payload_data; 501 502 ret = i2c_transfer(adapter, &msg, 1); 503 if (ret < 0) 504 drm_err(&i915->drm, 505 "Failed to xfer payload of size (%u) to reg (%u)\n", 506 payload_size, reg_offset); 507 508 kfree(payload_data); 509 err_alloc: 510 i2c_put_adapter(adapter); 511 err_bus: 512 return data + payload_size + 7; 513 } 514 515 static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data) 516 { 517 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 518 519 drm_dbg_kms(&i915->drm, "Skipping SPI element execution\n"); 520 521 return data + *(data + 5) + 6; 522 } 523 524 static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data) 525 { 526 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 527 #ifdef CONFIG_PMIC_OPREGION 528 u32 value, mask, reg_address; 529 u16 i2c_address; 530 int ret; 531 532 /* byte 0 aka PMIC Flag is reserved */ 533 i2c_address = get_unaligned_le16(data + 1); 534 reg_address = get_unaligned_le32(data + 3); 535 value = get_unaligned_le32(data + 7); 536 mask = get_unaligned_le32(data + 11); 537 538 ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address, 539 reg_address, 540 value, mask); 541 if (ret) 542 drm_err(&i915->drm, "%s failed, error: %d\n", __func__, ret); 543 #else 544 drm_err(&i915->drm, 545 "Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n"); 546 #endif 547 548 return data + 15; 549 } 550 551 typedef const u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi, 552 const u8 *data); 553 static const fn_mipi_elem_exec exec_elem[] = { 554 [MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet, 555 [MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay, 556 [MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio, 557 [MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c, 558 [MIPI_SEQ_ELEM_SPI] = mipi_exec_spi, 559 [MIPI_SEQ_ELEM_PMIC] = mipi_exec_pmic, 560 }; 561 562 /* 563 * MIPI Sequence from VBT #53 parsing logic 564 * We have already separated each seqence during bios parsing 565 * Following is generic execution function for any sequence 566 */ 567 568 static const char * const seq_name[] = { 569 [MIPI_SEQ_DEASSERT_RESET] = "MIPI_SEQ_DEASSERT_RESET", 570 [MIPI_SEQ_INIT_OTP] = "MIPI_SEQ_INIT_OTP", 571 [MIPI_SEQ_DISPLAY_ON] = "MIPI_SEQ_DISPLAY_ON", 572 [MIPI_SEQ_DISPLAY_OFF] = "MIPI_SEQ_DISPLAY_OFF", 573 [MIPI_SEQ_ASSERT_RESET] = "MIPI_SEQ_ASSERT_RESET", 574 [MIPI_SEQ_BACKLIGHT_ON] = "MIPI_SEQ_BACKLIGHT_ON", 575 [MIPI_SEQ_BACKLIGHT_OFF] = "MIPI_SEQ_BACKLIGHT_OFF", 576 [MIPI_SEQ_TEAR_ON] = "MIPI_SEQ_TEAR_ON", 577 [MIPI_SEQ_TEAR_OFF] = "MIPI_SEQ_TEAR_OFF", 578 [MIPI_SEQ_POWER_ON] = "MIPI_SEQ_POWER_ON", 579 [MIPI_SEQ_POWER_OFF] = "MIPI_SEQ_POWER_OFF", 580 }; 581 582 static const char *sequence_name(enum mipi_seq seq_id) 583 { 584 if (seq_id < ARRAY_SIZE(seq_name) && seq_name[seq_id]) 585 return seq_name[seq_id]; 586 else 587 return "(unknown)"; 588 } 589 590 static void intel_dsi_vbt_exec(struct intel_dsi *intel_dsi, 591 enum mipi_seq seq_id) 592 { 593 struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev); 594 struct intel_connector *connector = intel_dsi->attached_connector; 595 const u8 *data; 596 fn_mipi_elem_exec mipi_elem_exec; 597 598 if (drm_WARN_ON(&dev_priv->drm, 599 seq_id >= ARRAY_SIZE(connector->panel.vbt.dsi.sequence))) 600 return; 601 602 data = connector->panel.vbt.dsi.sequence[seq_id]; 603 if (!data) 604 return; 605 606 drm_WARN_ON(&dev_priv->drm, *data != seq_id); 607 608 drm_dbg_kms(&dev_priv->drm, "Starting MIPI sequence %d - %s\n", 609 seq_id, sequence_name(seq_id)); 610 611 /* Skip Sequence Byte. */ 612 data++; 613 614 /* Skip Size of Sequence. */ 615 if (connector->panel.vbt.dsi.seq_version >= 3) 616 data += 4; 617 618 while (1) { 619 u8 operation_byte = *data++; 620 u8 operation_size = 0; 621 622 if (operation_byte == MIPI_SEQ_ELEM_END) 623 break; 624 625 if (operation_byte < ARRAY_SIZE(exec_elem)) 626 mipi_elem_exec = exec_elem[operation_byte]; 627 else 628 mipi_elem_exec = NULL; 629 630 /* Size of Operation. */ 631 if (connector->panel.vbt.dsi.seq_version >= 3) 632 operation_size = *data++; 633 634 if (mipi_elem_exec) { 635 const u8 *next = data + operation_size; 636 637 data = mipi_elem_exec(intel_dsi, data); 638 639 /* Consistency check if we have size. */ 640 if (operation_size && data != next) { 641 drm_err(&dev_priv->drm, 642 "Inconsistent operation size\n"); 643 return; 644 } 645 } else if (operation_size) { 646 /* We have size, skip. */ 647 drm_dbg_kms(&dev_priv->drm, 648 "Unsupported MIPI operation byte %u\n", 649 operation_byte); 650 data += operation_size; 651 } else { 652 /* No size, can't skip without parsing. */ 653 drm_err(&dev_priv->drm, 654 "Unsupported MIPI operation byte %u\n", 655 operation_byte); 656 return; 657 } 658 } 659 } 660 661 void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi, 662 enum mipi_seq seq_id) 663 { 664 if (seq_id == MIPI_SEQ_POWER_ON && intel_dsi->gpio_panel) 665 gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1); 666 if (seq_id == MIPI_SEQ_BACKLIGHT_ON && intel_dsi->gpio_backlight) 667 gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 1); 668 669 intel_dsi_vbt_exec(intel_dsi, seq_id); 670 671 if (seq_id == MIPI_SEQ_POWER_OFF && intel_dsi->gpio_panel) 672 gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0); 673 if (seq_id == MIPI_SEQ_BACKLIGHT_OFF && intel_dsi->gpio_backlight) 674 gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 0); 675 } 676 677 void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec) 678 { 679 struct intel_connector *connector = intel_dsi->attached_connector; 680 681 /* For v3 VBTs in vid-mode the delays are part of the VBT sequences */ 682 if (is_vid_mode(intel_dsi) && connector->panel.vbt.dsi.seq_version >= 3) 683 return; 684 685 msleep(msec); 686 } 687 688 void intel_dsi_log_params(struct intel_dsi *intel_dsi) 689 { 690 struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); 691 692 drm_dbg_kms(&i915->drm, "Pclk %d\n", intel_dsi->pclk); 693 drm_dbg_kms(&i915->drm, "Pixel overlap %d\n", 694 intel_dsi->pixel_overlap); 695 drm_dbg_kms(&i915->drm, "Lane count %d\n", intel_dsi->lane_count); 696 drm_dbg_kms(&i915->drm, "DPHY param reg 0x%x\n", intel_dsi->dphy_reg); 697 drm_dbg_kms(&i915->drm, "Video mode format %s\n", 698 intel_dsi->video_mode == NON_BURST_SYNC_PULSE ? 699 "non-burst with sync pulse" : 700 intel_dsi->video_mode == NON_BURST_SYNC_EVENTS ? 701 "non-burst with sync events" : 702 intel_dsi->video_mode == BURST_MODE ? 703 "burst" : "<unknown>"); 704 drm_dbg_kms(&i915->drm, "Burst mode ratio %d\n", 705 intel_dsi->burst_mode_ratio); 706 drm_dbg_kms(&i915->drm, "Reset timer %d\n", intel_dsi->rst_timer_val); 707 drm_dbg_kms(&i915->drm, "Eot %s\n", 708 str_enabled_disabled(intel_dsi->eotp_pkt)); 709 drm_dbg_kms(&i915->drm, "Clockstop %s\n", 710 str_enabled_disabled(!intel_dsi->clock_stop)); 711 drm_dbg_kms(&i915->drm, "Mode %s\n", 712 intel_dsi->operation_mode ? "command" : "video"); 713 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) 714 drm_dbg_kms(&i915->drm, 715 "Dual link: DSI_DUAL_LINK_FRONT_BACK\n"); 716 else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT) 717 drm_dbg_kms(&i915->drm, 718 "Dual link: DSI_DUAL_LINK_PIXEL_ALT\n"); 719 else 720 drm_dbg_kms(&i915->drm, "Dual link: NONE\n"); 721 drm_dbg_kms(&i915->drm, "Pixel Format %d\n", intel_dsi->pixel_format); 722 drm_dbg_kms(&i915->drm, "TLPX %d\n", intel_dsi->escape_clk_div); 723 drm_dbg_kms(&i915->drm, "LP RX Timeout 0x%x\n", 724 intel_dsi->lp_rx_timeout); 725 drm_dbg_kms(&i915->drm, "Turnaround Timeout 0x%x\n", 726 intel_dsi->turn_arnd_val); 727 drm_dbg_kms(&i915->drm, "Init Count 0x%x\n", intel_dsi->init_count); 728 drm_dbg_kms(&i915->drm, "HS to LP Count 0x%x\n", 729 intel_dsi->hs_to_lp_count); 730 drm_dbg_kms(&i915->drm, "LP Byte Clock %d\n", intel_dsi->lp_byte_clk); 731 drm_dbg_kms(&i915->drm, "DBI BW Timer 0x%x\n", intel_dsi->bw_timer); 732 drm_dbg_kms(&i915->drm, "LP to HS Clock Count 0x%x\n", 733 intel_dsi->clk_lp_to_hs_count); 734 drm_dbg_kms(&i915->drm, "HS to LP Clock Count 0x%x\n", 735 intel_dsi->clk_hs_to_lp_count); 736 drm_dbg_kms(&i915->drm, "BTA %s\n", 737 str_enabled_disabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA))); 738 } 739 740 bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) 741 { 742 struct drm_device *dev = intel_dsi->base.base.dev; 743 struct drm_i915_private *dev_priv = to_i915(dev); 744 struct intel_connector *connector = intel_dsi->attached_connector; 745 struct mipi_config *mipi_config = connector->panel.vbt.dsi.config; 746 struct mipi_pps_data *pps = connector->panel.vbt.dsi.pps; 747 struct drm_display_mode *mode = connector->panel.vbt.lfp_lvds_vbt_mode; 748 u16 burst_mode_ratio; 749 enum port port; 750 751 drm_dbg_kms(&dev_priv->drm, "\n"); 752 753 intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1; 754 intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0; 755 intel_dsi->lane_count = mipi_config->lane_cnt + 1; 756 intel_dsi->pixel_format = 757 pixel_format_from_register_bits( 758 mipi_config->videomode_color_format << 7); 759 760 intel_dsi->dual_link = mipi_config->dual_link; 761 intel_dsi->pixel_overlap = mipi_config->pixel_overlap; 762 intel_dsi->operation_mode = mipi_config->is_cmd_mode; 763 intel_dsi->video_mode = mipi_config->video_transfer_mode; 764 intel_dsi->escape_clk_div = mipi_config->byte_clk_sel; 765 intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout; 766 intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout; 767 intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout; 768 intel_dsi->rst_timer_val = mipi_config->device_reset_timer; 769 intel_dsi->init_count = mipi_config->master_init_timer; 770 intel_dsi->bw_timer = mipi_config->dbi_bw_timer; 771 intel_dsi->video_frmt_cfg_bits = 772 mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0; 773 intel_dsi->bgr_enabled = mipi_config->rgb_flip; 774 775 /* Starting point, adjusted depending on dual link and burst mode */ 776 intel_dsi->pclk = mode->clock; 777 778 /* In dual link mode each port needs half of pixel clock */ 779 if (intel_dsi->dual_link) { 780 intel_dsi->pclk /= 2; 781 782 /* we can enable pixel_overlap if needed by panel. In this 783 * case we need to increase the pixelclock for extra pixels 784 */ 785 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) { 786 intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000); 787 } 788 } 789 790 /* Burst Mode Ratio 791 * Target ddr frequency from VBT / non burst ddr freq 792 * multiply by 100 to preserve remainder 793 */ 794 if (intel_dsi->video_mode == BURST_MODE) { 795 if (mipi_config->target_burst_mode_freq) { 796 u32 bitrate = intel_dsi_bitrate(intel_dsi); 797 798 /* 799 * Sometimes the VBT contains a slightly lower clock, 800 * then the bitrate we have calculated, in this case 801 * just replace it with the calculated bitrate. 802 */ 803 if (mipi_config->target_burst_mode_freq < bitrate && 804 intel_fuzzy_clock_check( 805 mipi_config->target_burst_mode_freq, 806 bitrate)) 807 mipi_config->target_burst_mode_freq = bitrate; 808 809 if (mipi_config->target_burst_mode_freq < bitrate) { 810 drm_err(&dev_priv->drm, 811 "Burst mode freq is less than computed\n"); 812 return false; 813 } 814 815 burst_mode_ratio = DIV_ROUND_UP( 816 mipi_config->target_burst_mode_freq * 100, 817 bitrate); 818 819 intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100); 820 } else { 821 drm_err(&dev_priv->drm, 822 "Burst mode target is not set\n"); 823 return false; 824 } 825 } else 826 burst_mode_ratio = 100; 827 828 intel_dsi->burst_mode_ratio = burst_mode_ratio; 829 830 /* delays in VBT are in unit of 100us, so need to convert 831 * here in ms 832 * Delay (100us) * 100 /1000 = Delay / 10 (ms) */ 833 intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10; 834 intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10; 835 intel_dsi->panel_on_delay = pps->panel_on_delay / 10; 836 intel_dsi->panel_off_delay = pps->panel_off_delay / 10; 837 intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10; 838 839 intel_dsi->i2c_bus_num = -1; 840 841 /* a regular driver would get the device in probe */ 842 for_each_dsi_port(port, intel_dsi->ports) { 843 mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device); 844 } 845 846 return true; 847 } 848 849 /* 850 * On some BYT/CHT devs some sequences are incomplete and we need to manually 851 * control some GPIOs. We need to add a GPIO lookup table before we get these. 852 * If the GOP did not initialize the panel (HDMI inserted) we may need to also 853 * change the pinmux for the SoC's PWM0 pin from GPIO to PWM. 854 */ 855 static struct gpiod_lookup_table pmic_panel_gpio_table = { 856 /* Intel GFX is consumer */ 857 .dev_id = "0000:00:02.0", 858 .table = { 859 /* Panel EN/DISABLE */ 860 GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH), 861 { } 862 }, 863 }; 864 865 static struct gpiod_lookup_table soc_panel_gpio_table = { 866 .dev_id = "0000:00:02.0", 867 .table = { 868 GPIO_LOOKUP("INT33FC:01", 10, "backlight", GPIO_ACTIVE_HIGH), 869 GPIO_LOOKUP("INT33FC:01", 11, "panel", GPIO_ACTIVE_HIGH), 870 { } 871 }, 872 }; 873 874 static const struct pinctrl_map soc_pwm_pinctrl_map[] = { 875 PIN_MAP_MUX_GROUP("0000:00:02.0", "soc_pwm0", "INT33FC:00", 876 "pwm0_grp", "pwm"), 877 }; 878 879 void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on) 880 { 881 struct drm_device *dev = intel_dsi->base.base.dev; 882 struct drm_i915_private *dev_priv = to_i915(dev); 883 struct intel_connector *connector = intel_dsi->attached_connector; 884 struct mipi_config *mipi_config = connector->panel.vbt.dsi.config; 885 enum gpiod_flags flags = panel_is_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; 886 bool want_backlight_gpio = false; 887 bool want_panel_gpio = false; 888 struct pinctrl *pinctrl; 889 int ret; 890 891 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && 892 mipi_config->pwm_blc == PPS_BLC_PMIC) { 893 gpiod_add_lookup_table(&pmic_panel_gpio_table); 894 want_panel_gpio = true; 895 } 896 897 if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) { 898 gpiod_add_lookup_table(&soc_panel_gpio_table); 899 want_panel_gpio = true; 900 want_backlight_gpio = true; 901 902 /* Ensure PWM0 pin is muxed as PWM instead of GPIO */ 903 ret = pinctrl_register_mappings(soc_pwm_pinctrl_map, 904 ARRAY_SIZE(soc_pwm_pinctrl_map)); 905 if (ret) 906 drm_err(&dev_priv->drm, 907 "Failed to register pwm0 pinmux mapping\n"); 908 909 pinctrl = devm_pinctrl_get_select(dev->dev, "soc_pwm0"); 910 if (IS_ERR(pinctrl)) 911 drm_err(&dev_priv->drm, 912 "Failed to set pinmux to PWM\n"); 913 } 914 915 if (want_panel_gpio) { 916 intel_dsi->gpio_panel = gpiod_get(dev->dev, "panel", flags); 917 if (IS_ERR(intel_dsi->gpio_panel)) { 918 drm_err(&dev_priv->drm, 919 "Failed to own gpio for panel control\n"); 920 intel_dsi->gpio_panel = NULL; 921 } 922 } 923 924 if (want_backlight_gpio) { 925 intel_dsi->gpio_backlight = 926 gpiod_get(dev->dev, "backlight", flags); 927 if (IS_ERR(intel_dsi->gpio_backlight)) { 928 drm_err(&dev_priv->drm, 929 "Failed to own gpio for backlight control\n"); 930 intel_dsi->gpio_backlight = NULL; 931 } 932 } 933 } 934 935 void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi) 936 { 937 struct drm_device *dev = intel_dsi->base.base.dev; 938 struct drm_i915_private *dev_priv = to_i915(dev); 939 struct intel_connector *connector = intel_dsi->attached_connector; 940 struct mipi_config *mipi_config = connector->panel.vbt.dsi.config; 941 942 if (intel_dsi->gpio_panel) { 943 gpiod_put(intel_dsi->gpio_panel); 944 intel_dsi->gpio_panel = NULL; 945 } 946 947 if (intel_dsi->gpio_backlight) { 948 gpiod_put(intel_dsi->gpio_backlight); 949 intel_dsi->gpio_backlight = NULL; 950 } 951 952 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && 953 mipi_config->pwm_blc == PPS_BLC_PMIC) 954 gpiod_remove_lookup_table(&pmic_panel_gpio_table); 955 956 if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) { 957 pinctrl_unregister_mappings(soc_pwm_pinctrl_map); 958 gpiod_remove_lookup_table(&soc_panel_gpio_table); 959 } 960 } 961