1 /* 2 * Copyright © 2008 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 21 * IN THE SOFTWARE. 22 * 23 * Authors: 24 * Keith Packard <keithp@keithp.com> 25 * 26 */ 27 28 #include <linux/export.h> 29 #include <linux/i2c.h> 30 #include <linux/notifier.h> 31 #include <linux/slab.h> 32 #include <linux/string_helpers.h> 33 #include <linux/timekeeping.h> 34 #include <linux/types.h> 35 36 #include <asm/byteorder.h> 37 38 #include <drm/display/drm_dp_helper.h> 39 #include <drm/display/drm_dsc_helper.h> 40 #include <drm/display/drm_hdmi_helper.h> 41 #include <drm/drm_atomic_helper.h> 42 #include <drm/drm_crtc.h> 43 #include <drm/drm_edid.h> 44 #include <drm/drm_probe_helper.h> 45 46 #include "g4x_dp.h" 47 #include "i915_debugfs.h" 48 #include "i915_drv.h" 49 #include "i915_reg.h" 50 #include "intel_atomic.h" 51 #include "intel_audio.h" 52 #include "intel_backlight.h" 53 #include "intel_combo_phy_regs.h" 54 #include "intel_connector.h" 55 #include "intel_crtc.h" 56 #include "intel_ddi.h" 57 #include "intel_de.h" 58 #include "intel_display_types.h" 59 #include "intel_dp.h" 60 #include "intel_dp_aux.h" 61 #include "intel_dp_hdcp.h" 62 #include "intel_dp_link_training.h" 63 #include "intel_dp_mst.h" 64 #include "intel_dpio_phy.h" 65 #include "intel_dpll.h" 66 #include "intel_fifo_underrun.h" 67 #include "intel_hdcp.h" 68 #include "intel_hdmi.h" 69 #include "intel_hotplug.h" 70 #include "intel_lspcon.h" 71 #include "intel_lvds.h" 72 #include "intel_panel.h" 73 #include "intel_pch_display.h" 74 #include "intel_pps.h" 75 #include "intel_psr.h" 76 #include "intel_tc.h" 77 #include "intel_vdsc.h" 78 #include "intel_vrr.h" 79 80 /* DP DSC throughput values used for slice count calculations KPixels/s */ 81 #define DP_DSC_PEAK_PIXEL_RATE 2720000 82 #define DP_DSC_MAX_ENC_THROUGHPUT_0 340000 83 #define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 84 85 /* DP DSC FEC Overhead factor = 1/(0.972261) */ 86 #define DP_DSC_FEC_OVERHEAD_FACTOR 972261 87 88 /* Compliance test status bits */ 89 #define INTEL_DP_RESOLUTION_SHIFT_MASK 0 90 #define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK) 91 #define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK) 92 #define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK) 93 94 95 /* Constants for DP DSC configurations */ 96 static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15}; 97 98 /* With Single pipe configuration, HW is capable of supporting maximum 99 * of 4 slices per line. 100 */ 101 static const u8 valid_dsc_slicecount[] = {1, 2, 4}; 102 103 /** 104 * intel_dp_is_edp - is the given port attached to an eDP panel (either CPU or PCH) 105 * @intel_dp: DP struct 106 * 107 * If a CPU or PCH DP output is attached to an eDP panel, this function 108 * will return true, and false otherwise. 109 * 110 * This function is not safe to use prior to encoder type being set. 111 */ 112 bool intel_dp_is_edp(struct intel_dp *intel_dp) 113 { 114 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 115 116 return dig_port->base.type == INTEL_OUTPUT_EDP; 117 } 118 119 static void intel_dp_unset_edid(struct intel_dp *intel_dp); 120 static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc); 121 122 /* Is link rate UHBR and thus 128b/132b? */ 123 bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state) 124 { 125 return crtc_state->port_clock >= 1000000; 126 } 127 128 static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp) 129 { 130 intel_dp->sink_rates[0] = 162000; 131 intel_dp->num_sink_rates = 1; 132 } 133 134 /* update sink rates from dpcd */ 135 static void intel_dp_set_dpcd_sink_rates(struct intel_dp *intel_dp) 136 { 137 static const int dp_rates[] = { 138 162000, 270000, 540000, 810000 139 }; 140 int i, max_rate; 141 int max_lttpr_rate; 142 143 if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS)) { 144 /* Needed, e.g., for Apple MBP 2017, 15 inch eDP Retina panel */ 145 static const int quirk_rates[] = { 162000, 270000, 324000 }; 146 147 memcpy(intel_dp->sink_rates, quirk_rates, sizeof(quirk_rates)); 148 intel_dp->num_sink_rates = ARRAY_SIZE(quirk_rates); 149 150 return; 151 } 152 153 /* 154 * Sink rates for 8b/10b. 155 */ 156 max_rate = drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]); 157 max_lttpr_rate = drm_dp_lttpr_max_link_rate(intel_dp->lttpr_common_caps); 158 if (max_lttpr_rate) 159 max_rate = min(max_rate, max_lttpr_rate); 160 161 for (i = 0; i < ARRAY_SIZE(dp_rates); i++) { 162 if (dp_rates[i] > max_rate) 163 break; 164 intel_dp->sink_rates[i] = dp_rates[i]; 165 } 166 167 /* 168 * Sink rates for 128b/132b. If set, sink should support all 8b/10b 169 * rates and 10 Gbps. 170 */ 171 if (intel_dp->dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_128B132B) { 172 u8 uhbr_rates = 0; 173 174 BUILD_BUG_ON(ARRAY_SIZE(intel_dp->sink_rates) < ARRAY_SIZE(dp_rates) + 3); 175 176 drm_dp_dpcd_readb(&intel_dp->aux, 177 DP_128B132B_SUPPORTED_LINK_RATES, &uhbr_rates); 178 179 if (drm_dp_lttpr_count(intel_dp->lttpr_common_caps)) { 180 /* We have a repeater */ 181 if (intel_dp->lttpr_common_caps[0] >= 0x20 && 182 intel_dp->lttpr_common_caps[DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER - 183 DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] & 184 DP_PHY_REPEATER_128B132B_SUPPORTED) { 185 /* Repeater supports 128b/132b, valid UHBR rates */ 186 uhbr_rates &= intel_dp->lttpr_common_caps[DP_PHY_REPEATER_128B132B_RATES - 187 DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; 188 } else { 189 /* Does not support 128b/132b */ 190 uhbr_rates = 0; 191 } 192 } 193 194 if (uhbr_rates & DP_UHBR10) 195 intel_dp->sink_rates[i++] = 1000000; 196 if (uhbr_rates & DP_UHBR13_5) 197 intel_dp->sink_rates[i++] = 1350000; 198 if (uhbr_rates & DP_UHBR20) 199 intel_dp->sink_rates[i++] = 2000000; 200 } 201 202 intel_dp->num_sink_rates = i; 203 } 204 205 static void intel_dp_set_sink_rates(struct intel_dp *intel_dp) 206 { 207 struct intel_connector *connector = intel_dp->attached_connector; 208 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); 209 struct intel_encoder *encoder = &intel_dig_port->base; 210 211 intel_dp_set_dpcd_sink_rates(intel_dp); 212 213 if (intel_dp->num_sink_rates) 214 return; 215 216 drm_err(&dp_to_i915(intel_dp)->drm, 217 "[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD with no link rates, using defaults\n", 218 connector->base.base.id, connector->base.name, 219 encoder->base.base.id, encoder->base.name); 220 221 intel_dp_set_default_sink_rates(intel_dp); 222 } 223 224 static void intel_dp_set_default_max_sink_lane_count(struct intel_dp *intel_dp) 225 { 226 intel_dp->max_sink_lane_count = 1; 227 } 228 229 static void intel_dp_set_max_sink_lane_count(struct intel_dp *intel_dp) 230 { 231 struct intel_connector *connector = intel_dp->attached_connector; 232 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); 233 struct intel_encoder *encoder = &intel_dig_port->base; 234 235 intel_dp->max_sink_lane_count = drm_dp_max_lane_count(intel_dp->dpcd); 236 237 switch (intel_dp->max_sink_lane_count) { 238 case 1: 239 case 2: 240 case 4: 241 return; 242 } 243 244 drm_err(&dp_to_i915(intel_dp)->drm, 245 "[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD max lane count (%d), using default\n", 246 connector->base.base.id, connector->base.name, 247 encoder->base.base.id, encoder->base.name, 248 intel_dp->max_sink_lane_count); 249 250 intel_dp_set_default_max_sink_lane_count(intel_dp); 251 } 252 253 /* Get length of rates array potentially limited by max_rate. */ 254 static int intel_dp_rate_limit_len(const int *rates, int len, int max_rate) 255 { 256 int i; 257 258 /* Limit results by potentially reduced max rate */ 259 for (i = 0; i < len; i++) { 260 if (rates[len - i - 1] <= max_rate) 261 return len - i; 262 } 263 264 return 0; 265 } 266 267 /* Get length of common rates array potentially limited by max_rate. */ 268 static int intel_dp_common_len_rate_limit(const struct intel_dp *intel_dp, 269 int max_rate) 270 { 271 return intel_dp_rate_limit_len(intel_dp->common_rates, 272 intel_dp->num_common_rates, max_rate); 273 } 274 275 static int intel_dp_common_rate(struct intel_dp *intel_dp, int index) 276 { 277 if (drm_WARN_ON(&dp_to_i915(intel_dp)->drm, 278 index < 0 || index >= intel_dp->num_common_rates)) 279 return 162000; 280 281 return intel_dp->common_rates[index]; 282 } 283 284 /* Theoretical max between source and sink */ 285 static int intel_dp_max_common_rate(struct intel_dp *intel_dp) 286 { 287 return intel_dp_common_rate(intel_dp, intel_dp->num_common_rates - 1); 288 } 289 290 static int intel_dp_max_source_lane_count(struct intel_digital_port *dig_port) 291 { 292 int vbt_max_lanes = intel_bios_dp_max_lane_count(&dig_port->base); 293 int max_lanes = dig_port->max_lanes; 294 295 if (vbt_max_lanes) 296 max_lanes = min(max_lanes, vbt_max_lanes); 297 298 return max_lanes; 299 } 300 301 /* Theoretical max between source and sink */ 302 static int intel_dp_max_common_lane_count(struct intel_dp *intel_dp) 303 { 304 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 305 int source_max = intel_dp_max_source_lane_count(dig_port); 306 int sink_max = intel_dp->max_sink_lane_count; 307 int fia_max = intel_tc_port_fia_max_lane_count(dig_port); 308 int lttpr_max = drm_dp_lttpr_max_lane_count(intel_dp->lttpr_common_caps); 309 310 if (lttpr_max) 311 sink_max = min(sink_max, lttpr_max); 312 313 return min3(source_max, sink_max, fia_max); 314 } 315 316 int intel_dp_max_lane_count(struct intel_dp *intel_dp) 317 { 318 switch (intel_dp->max_link_lane_count) { 319 case 1: 320 case 2: 321 case 4: 322 return intel_dp->max_link_lane_count; 323 default: 324 MISSING_CASE(intel_dp->max_link_lane_count); 325 return 1; 326 } 327 } 328 329 /* 330 * The required data bandwidth for a mode with given pixel clock and bpp. This 331 * is the required net bandwidth independent of the data bandwidth efficiency. 332 */ 333 int 334 intel_dp_link_required(int pixel_clock, int bpp) 335 { 336 /* pixel_clock is in kHz, divide bpp by 8 for bit to Byte conversion */ 337 return DIV_ROUND_UP(pixel_clock * bpp, 8); 338 } 339 340 /* 341 * Given a link rate and lanes, get the data bandwidth. 342 * 343 * Data bandwidth is the actual payload rate, which depends on the data 344 * bandwidth efficiency and the link rate. 345 * 346 * For 8b/10b channel encoding, SST and non-FEC, the data bandwidth efficiency 347 * is 80%. For example, for a 1.62 Gbps link, 1.62*10^9 bps * 0.80 * (1/8) = 348 * 162000 kBps. With 8-bit symbols, we have 162000 kHz symbol clock. Just by 349 * coincidence, the port clock in kHz matches the data bandwidth in kBps, and 350 * they equal the link bit rate in Gbps multiplied by 100000. (Note that this no 351 * longer holds for data bandwidth as soon as FEC or MST is taken into account!) 352 * 353 * For 128b/132b channel encoding, the data bandwidth efficiency is 96.71%. For 354 * example, for a 10 Gbps link, 10*10^9 bps * 0.9671 * (1/8) = 1208875 355 * kBps. With 32-bit symbols, we have 312500 kHz symbol clock. The value 1000000 356 * does not match the symbol clock, the port clock (not even if you think in 357 * terms of a byte clock), nor the data bandwidth. It only matches the link bit 358 * rate in units of 10000 bps. 359 */ 360 int 361 intel_dp_max_data_rate(int max_link_rate, int max_lanes) 362 { 363 if (max_link_rate >= 1000000) { 364 /* 365 * UHBR rates always use 128b/132b channel encoding, and have 366 * 97.71% data bandwidth efficiency. Consider max_link_rate the 367 * link bit rate in units of 10000 bps. 368 */ 369 int max_link_rate_kbps = max_link_rate * 10; 370 371 max_link_rate_kbps = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(max_link_rate_kbps, 9671), 10000); 372 max_link_rate = max_link_rate_kbps / 8; 373 } 374 375 /* 376 * Lower than UHBR rates always use 8b/10b channel encoding, and have 377 * 80% data bandwidth efficiency for SST non-FEC. However, this turns 378 * out to be a nop by coincidence, and can be skipped: 379 * 380 * int max_link_rate_kbps = max_link_rate * 10; 381 * max_link_rate_kbps = DIV_ROUND_CLOSEST_ULL(max_link_rate_kbps * 8, 10); 382 * max_link_rate = max_link_rate_kbps / 8; 383 */ 384 385 return max_link_rate * max_lanes; 386 } 387 388 bool intel_dp_can_bigjoiner(struct intel_dp *intel_dp) 389 { 390 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); 391 struct intel_encoder *encoder = &intel_dig_port->base; 392 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 393 394 return DISPLAY_VER(dev_priv) >= 12 || 395 (DISPLAY_VER(dev_priv) == 11 && 396 encoder->port != PORT_A); 397 } 398 399 static int dg2_max_source_rate(struct intel_dp *intel_dp) 400 { 401 return intel_dp_is_edp(intel_dp) ? 810000 : 1350000; 402 } 403 404 static int icl_max_source_rate(struct intel_dp *intel_dp) 405 { 406 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 407 struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); 408 enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port); 409 410 if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp)) 411 return 540000; 412 413 return 810000; 414 } 415 416 static int ehl_max_source_rate(struct intel_dp *intel_dp) 417 { 418 if (intel_dp_is_edp(intel_dp)) 419 return 540000; 420 421 return 810000; 422 } 423 424 static int vbt_max_link_rate(struct intel_dp *intel_dp) 425 { 426 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 427 int max_rate; 428 429 max_rate = intel_bios_dp_max_link_rate(encoder); 430 431 if (intel_dp_is_edp(intel_dp)) { 432 struct intel_connector *connector = intel_dp->attached_connector; 433 int edp_max_rate = connector->panel.vbt.edp.max_link_rate; 434 435 if (max_rate && edp_max_rate) 436 max_rate = min(max_rate, edp_max_rate); 437 else if (edp_max_rate) 438 max_rate = edp_max_rate; 439 } 440 441 return max_rate; 442 } 443 444 static void 445 intel_dp_set_source_rates(struct intel_dp *intel_dp) 446 { 447 /* The values must be in increasing order */ 448 static const int icl_rates[] = { 449 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000, 450 1000000, 1350000, 451 }; 452 static const int bxt_rates[] = { 453 162000, 216000, 243000, 270000, 324000, 432000, 540000 454 }; 455 static const int skl_rates[] = { 456 162000, 216000, 270000, 324000, 432000, 540000 457 }; 458 static const int hsw_rates[] = { 459 162000, 270000, 540000 460 }; 461 static const int g4x_rates[] = { 462 162000, 270000 463 }; 464 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 465 struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); 466 const int *source_rates; 467 int size, max_rate = 0, vbt_max_rate; 468 469 /* This should only be done once */ 470 drm_WARN_ON(&dev_priv->drm, 471 intel_dp->source_rates || intel_dp->num_source_rates); 472 473 if (DISPLAY_VER(dev_priv) >= 11) { 474 source_rates = icl_rates; 475 size = ARRAY_SIZE(icl_rates); 476 if (IS_DG2(dev_priv)) 477 max_rate = dg2_max_source_rate(intel_dp); 478 else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) || 479 IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) 480 max_rate = 810000; 481 else if (IS_JSL_EHL(dev_priv)) 482 max_rate = ehl_max_source_rate(intel_dp); 483 else 484 max_rate = icl_max_source_rate(intel_dp); 485 } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { 486 source_rates = bxt_rates; 487 size = ARRAY_SIZE(bxt_rates); 488 } else if (DISPLAY_VER(dev_priv) == 9) { 489 source_rates = skl_rates; 490 size = ARRAY_SIZE(skl_rates); 491 } else if ((IS_HASWELL(dev_priv) && !IS_HSW_ULX(dev_priv)) || 492 IS_BROADWELL(dev_priv)) { 493 source_rates = hsw_rates; 494 size = ARRAY_SIZE(hsw_rates); 495 } else { 496 source_rates = g4x_rates; 497 size = ARRAY_SIZE(g4x_rates); 498 } 499 500 vbt_max_rate = vbt_max_link_rate(intel_dp); 501 if (max_rate && vbt_max_rate) 502 max_rate = min(max_rate, vbt_max_rate); 503 else if (vbt_max_rate) 504 max_rate = vbt_max_rate; 505 506 if (max_rate) 507 size = intel_dp_rate_limit_len(source_rates, size, max_rate); 508 509 intel_dp->source_rates = source_rates; 510 intel_dp->num_source_rates = size; 511 } 512 513 static int intersect_rates(const int *source_rates, int source_len, 514 const int *sink_rates, int sink_len, 515 int *common_rates) 516 { 517 int i = 0, j = 0, k = 0; 518 519 while (i < source_len && j < sink_len) { 520 if (source_rates[i] == sink_rates[j]) { 521 if (WARN_ON(k >= DP_MAX_SUPPORTED_RATES)) 522 return k; 523 common_rates[k] = source_rates[i]; 524 ++k; 525 ++i; 526 ++j; 527 } else if (source_rates[i] < sink_rates[j]) { 528 ++i; 529 } else { 530 ++j; 531 } 532 } 533 return k; 534 } 535 536 /* return index of rate in rates array, or -1 if not found */ 537 static int intel_dp_rate_index(const int *rates, int len, int rate) 538 { 539 int i; 540 541 for (i = 0; i < len; i++) 542 if (rate == rates[i]) 543 return i; 544 545 return -1; 546 } 547 548 static void intel_dp_set_common_rates(struct intel_dp *intel_dp) 549 { 550 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 551 552 drm_WARN_ON(&i915->drm, 553 !intel_dp->num_source_rates || !intel_dp->num_sink_rates); 554 555 intel_dp->num_common_rates = intersect_rates(intel_dp->source_rates, 556 intel_dp->num_source_rates, 557 intel_dp->sink_rates, 558 intel_dp->num_sink_rates, 559 intel_dp->common_rates); 560 561 /* Paranoia, there should always be something in common. */ 562 if (drm_WARN_ON(&i915->drm, intel_dp->num_common_rates == 0)) { 563 intel_dp->common_rates[0] = 162000; 564 intel_dp->num_common_rates = 1; 565 } 566 } 567 568 static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate, 569 u8 lane_count) 570 { 571 /* 572 * FIXME: we need to synchronize the current link parameters with 573 * hardware readout. Currently fast link training doesn't work on 574 * boot-up. 575 */ 576 if (link_rate == 0 || 577 link_rate > intel_dp->max_link_rate) 578 return false; 579 580 if (lane_count == 0 || 581 lane_count > intel_dp_max_lane_count(intel_dp)) 582 return false; 583 584 return true; 585 } 586 587 static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp, 588 int link_rate, 589 u8 lane_count) 590 { 591 /* FIXME figure out what we actually want here */ 592 const struct drm_display_mode *fixed_mode = 593 intel_panel_preferred_fixed_mode(intel_dp->attached_connector); 594 int mode_rate, max_rate; 595 596 mode_rate = intel_dp_link_required(fixed_mode->clock, 18); 597 max_rate = intel_dp_max_data_rate(link_rate, lane_count); 598 if (mode_rate > max_rate) 599 return false; 600 601 return true; 602 } 603 604 int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp, 605 int link_rate, u8 lane_count) 606 { 607 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 608 int index; 609 610 /* 611 * TODO: Enable fallback on MST links once MST link compute can handle 612 * the fallback params. 613 */ 614 if (intel_dp->is_mst) { 615 drm_err(&i915->drm, "Link Training Unsuccessful\n"); 616 return -1; 617 } 618 619 if (intel_dp_is_edp(intel_dp) && !intel_dp->use_max_params) { 620 drm_dbg_kms(&i915->drm, 621 "Retrying Link training for eDP with max parameters\n"); 622 intel_dp->use_max_params = true; 623 return 0; 624 } 625 626 index = intel_dp_rate_index(intel_dp->common_rates, 627 intel_dp->num_common_rates, 628 link_rate); 629 if (index > 0) { 630 if (intel_dp_is_edp(intel_dp) && 631 !intel_dp_can_link_train_fallback_for_edp(intel_dp, 632 intel_dp_common_rate(intel_dp, index - 1), 633 lane_count)) { 634 drm_dbg_kms(&i915->drm, 635 "Retrying Link training for eDP with same parameters\n"); 636 return 0; 637 } 638 intel_dp->max_link_rate = intel_dp_common_rate(intel_dp, index - 1); 639 intel_dp->max_link_lane_count = lane_count; 640 } else if (lane_count > 1) { 641 if (intel_dp_is_edp(intel_dp) && 642 !intel_dp_can_link_train_fallback_for_edp(intel_dp, 643 intel_dp_max_common_rate(intel_dp), 644 lane_count >> 1)) { 645 drm_dbg_kms(&i915->drm, 646 "Retrying Link training for eDP with same parameters\n"); 647 return 0; 648 } 649 intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp); 650 intel_dp->max_link_lane_count = lane_count >> 1; 651 } else { 652 drm_err(&i915->drm, "Link Training Unsuccessful\n"); 653 return -1; 654 } 655 656 return 0; 657 } 658 659 u32 intel_dp_mode_to_fec_clock(u32 mode_clock) 660 { 661 return div_u64(mul_u32_u32(mode_clock, 1000000U), 662 DP_DSC_FEC_OVERHEAD_FACTOR); 663 } 664 665 static int 666 small_joiner_ram_size_bits(struct drm_i915_private *i915) 667 { 668 if (DISPLAY_VER(i915) >= 13) 669 return 17280 * 8; 670 else if (DISPLAY_VER(i915) >= 11) 671 return 7680 * 8; 672 else 673 return 6144 * 8; 674 } 675 676 static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915, 677 u32 link_clock, u32 lane_count, 678 u32 mode_clock, u32 mode_hdisplay, 679 bool bigjoiner, 680 u32 pipe_bpp) 681 { 682 u32 bits_per_pixel, max_bpp_small_joiner_ram; 683 int i; 684 685 /* 686 * Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* 687 * (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) 688 * for SST -> TimeSlotsPerMTP is 1, 689 * for MST -> TimeSlotsPerMTP has to be calculated 690 */ 691 bits_per_pixel = (link_clock * lane_count * 8) / 692 intel_dp_mode_to_fec_clock(mode_clock); 693 694 /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ 695 max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) / 696 mode_hdisplay; 697 698 if (bigjoiner) 699 max_bpp_small_joiner_ram *= 2; 700 701 /* 702 * Greatest allowed DSC BPP = MIN (output BPP from available Link BW 703 * check, output bpp from small joiner RAM check) 704 */ 705 bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram); 706 707 if (bigjoiner) { 708 u32 max_bpp_bigjoiner = 709 i915->display.cdclk.max_cdclk_freq * 48 / 710 intel_dp_mode_to_fec_clock(mode_clock); 711 712 bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner); 713 } 714 715 /* Error out if the max bpp is less than smallest allowed valid bpp */ 716 if (bits_per_pixel < valid_dsc_bpp[0]) { 717 drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n", 718 bits_per_pixel, valid_dsc_bpp[0]); 719 return 0; 720 } 721 722 /* From XE_LPD onwards we support from bpc upto uncompressed bpp-1 BPPs */ 723 if (DISPLAY_VER(i915) >= 13) { 724 bits_per_pixel = min(bits_per_pixel, pipe_bpp - 1); 725 } else { 726 /* Find the nearest match in the array of known BPPs from VESA */ 727 for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) { 728 if (bits_per_pixel < valid_dsc_bpp[i + 1]) 729 break; 730 } 731 bits_per_pixel = valid_dsc_bpp[i]; 732 } 733 734 /* 735 * Compressed BPP in U6.4 format so multiply by 16, for Gen 11, 736 * fractional part is 0 737 */ 738 return bits_per_pixel << 4; 739 } 740 741 static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp, 742 int mode_clock, int mode_hdisplay, 743 bool bigjoiner) 744 { 745 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 746 u8 min_slice_count, i; 747 int max_slice_width; 748 749 if (mode_clock <= DP_DSC_PEAK_PIXEL_RATE) 750 min_slice_count = DIV_ROUND_UP(mode_clock, 751 DP_DSC_MAX_ENC_THROUGHPUT_0); 752 else 753 min_slice_count = DIV_ROUND_UP(mode_clock, 754 DP_DSC_MAX_ENC_THROUGHPUT_1); 755 756 max_slice_width = drm_dp_dsc_sink_max_slice_width(intel_dp->dsc_dpcd); 757 if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) { 758 drm_dbg_kms(&i915->drm, 759 "Unsupported slice width %d by DP DSC Sink device\n", 760 max_slice_width); 761 return 0; 762 } 763 /* Also take into account max slice width */ 764 min_slice_count = max_t(u8, min_slice_count, 765 DIV_ROUND_UP(mode_hdisplay, 766 max_slice_width)); 767 768 /* Find the closest match to the valid slice count values */ 769 for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) { 770 u8 test_slice_count = valid_dsc_slicecount[i] << bigjoiner; 771 772 if (test_slice_count > 773 drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false)) 774 break; 775 776 /* big joiner needs small joiner to be enabled */ 777 if (bigjoiner && test_slice_count < 4) 778 continue; 779 780 if (min_slice_count <= test_slice_count) 781 return test_slice_count; 782 } 783 784 drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n", 785 min_slice_count); 786 return 0; 787 } 788 789 static enum intel_output_format 790 intel_dp_output_format(struct intel_connector *connector, 791 bool ycbcr_420_output) 792 { 793 struct intel_dp *intel_dp = intel_attached_dp(connector); 794 795 if (!connector->base.ycbcr_420_allowed || !ycbcr_420_output) 796 return INTEL_OUTPUT_FORMAT_RGB; 797 798 if (intel_dp->dfp.rgb_to_ycbcr && 799 intel_dp->dfp.ycbcr_444_to_420) 800 return INTEL_OUTPUT_FORMAT_RGB; 801 802 if (intel_dp->dfp.ycbcr_444_to_420) 803 return INTEL_OUTPUT_FORMAT_YCBCR444; 804 else 805 return INTEL_OUTPUT_FORMAT_YCBCR420; 806 } 807 808 int intel_dp_min_bpp(enum intel_output_format output_format) 809 { 810 if (output_format == INTEL_OUTPUT_FORMAT_RGB) 811 return 6 * 3; 812 else 813 return 8 * 3; 814 } 815 816 static int intel_dp_output_bpp(enum intel_output_format output_format, int bpp) 817 { 818 /* 819 * bpp value was assumed to RGB format. And YCbCr 4:2:0 output 820 * format of the number of bytes per pixel will be half the number 821 * of bytes of RGB pixel. 822 */ 823 if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) 824 bpp /= 2; 825 826 return bpp; 827 } 828 829 static int 830 intel_dp_mode_min_output_bpp(struct intel_connector *connector, 831 const struct drm_display_mode *mode) 832 { 833 const struct drm_display_info *info = &connector->base.display_info; 834 enum intel_output_format output_format = 835 intel_dp_output_format(connector, drm_mode_is_420_only(info, mode)); 836 837 return intel_dp_output_bpp(output_format, intel_dp_min_bpp(output_format)); 838 } 839 840 static bool intel_dp_hdisplay_bad(struct drm_i915_private *dev_priv, 841 int hdisplay) 842 { 843 /* 844 * Older platforms don't like hdisplay==4096 with DP. 845 * 846 * On ILK/SNB/IVB the pipe seems to be somewhat running (scanline 847 * and frame counter increment), but we don't get vblank interrupts, 848 * and the pipe underruns immediately. The link also doesn't seem 849 * to get trained properly. 850 * 851 * On CHV the vblank interrupts don't seem to disappear but 852 * otherwise the symptoms are similar. 853 * 854 * TODO: confirm the behaviour on HSW+ 855 */ 856 return hdisplay == 4096 && !HAS_DDI(dev_priv); 857 } 858 859 static int intel_dp_max_tmds_clock(struct intel_dp *intel_dp) 860 { 861 struct intel_connector *connector = intel_dp->attached_connector; 862 const struct drm_display_info *info = &connector->base.display_info; 863 int max_tmds_clock = intel_dp->dfp.max_tmds_clock; 864 865 /* Only consider the sink's max TMDS clock if we know this is a HDMI DFP */ 866 if (max_tmds_clock && info->max_tmds_clock) 867 max_tmds_clock = min(max_tmds_clock, info->max_tmds_clock); 868 869 return max_tmds_clock; 870 } 871 872 static enum drm_mode_status 873 intel_dp_tmds_clock_valid(struct intel_dp *intel_dp, 874 int clock, int bpc, bool ycbcr420_output, 875 bool respect_downstream_limits) 876 { 877 int tmds_clock, min_tmds_clock, max_tmds_clock; 878 879 if (!respect_downstream_limits) 880 return MODE_OK; 881 882 tmds_clock = intel_hdmi_tmds_clock(clock, bpc, ycbcr420_output); 883 884 min_tmds_clock = intel_dp->dfp.min_tmds_clock; 885 max_tmds_clock = intel_dp_max_tmds_clock(intel_dp); 886 887 if (min_tmds_clock && tmds_clock < min_tmds_clock) 888 return MODE_CLOCK_LOW; 889 890 if (max_tmds_clock && tmds_clock > max_tmds_clock) 891 return MODE_CLOCK_HIGH; 892 893 return MODE_OK; 894 } 895 896 static enum drm_mode_status 897 intel_dp_mode_valid_downstream(struct intel_connector *connector, 898 const struct drm_display_mode *mode, 899 int target_clock) 900 { 901 struct intel_dp *intel_dp = intel_attached_dp(connector); 902 const struct drm_display_info *info = &connector->base.display_info; 903 enum drm_mode_status status; 904 bool ycbcr_420_only; 905 906 /* If PCON supports FRL MODE, check FRL bandwidth constraints */ 907 if (intel_dp->dfp.pcon_max_frl_bw) { 908 int target_bw; 909 int max_frl_bw; 910 int bpp = intel_dp_mode_min_output_bpp(connector, mode); 911 912 target_bw = bpp * target_clock; 913 914 max_frl_bw = intel_dp->dfp.pcon_max_frl_bw; 915 916 /* converting bw from Gbps to Kbps*/ 917 max_frl_bw = max_frl_bw * 1000000; 918 919 if (target_bw > max_frl_bw) 920 return MODE_CLOCK_HIGH; 921 922 return MODE_OK; 923 } 924 925 if (intel_dp->dfp.max_dotclock && 926 target_clock > intel_dp->dfp.max_dotclock) 927 return MODE_CLOCK_HIGH; 928 929 ycbcr_420_only = drm_mode_is_420_only(info, mode); 930 931 /* Assume 8bpc for the DP++/HDMI/DVI TMDS clock check */ 932 status = intel_dp_tmds_clock_valid(intel_dp, target_clock, 933 8, ycbcr_420_only, true); 934 935 if (status != MODE_OK) { 936 if (ycbcr_420_only || 937 !connector->base.ycbcr_420_allowed || 938 !drm_mode_is_420_also(info, mode)) 939 return status; 940 941 status = intel_dp_tmds_clock_valid(intel_dp, target_clock, 942 8, true, true); 943 if (status != MODE_OK) 944 return status; 945 } 946 947 return MODE_OK; 948 } 949 950 static bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp, 951 int hdisplay, int clock) 952 { 953 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 954 955 if (!intel_dp_can_bigjoiner(intel_dp)) 956 return false; 957 958 return clock > i915->max_dotclk_freq || hdisplay > 5120; 959 } 960 961 static enum drm_mode_status 962 intel_dp_mode_valid(struct drm_connector *_connector, 963 struct drm_display_mode *mode) 964 { 965 struct intel_connector *connector = to_intel_connector(_connector); 966 struct intel_dp *intel_dp = intel_attached_dp(connector); 967 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 968 const struct drm_display_mode *fixed_mode; 969 int target_clock = mode->clock; 970 int max_rate, mode_rate, max_lanes, max_link_clock; 971 int max_dotclk = dev_priv->max_dotclk_freq; 972 u16 dsc_max_output_bpp = 0; 973 u8 dsc_slice_count = 0; 974 enum drm_mode_status status; 975 bool dsc = false, bigjoiner = false; 976 977 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) 978 return MODE_NO_DBLESCAN; 979 980 if (mode->flags & DRM_MODE_FLAG_DBLCLK) 981 return MODE_H_ILLEGAL; 982 983 fixed_mode = intel_panel_fixed_mode(connector, mode); 984 if (intel_dp_is_edp(intel_dp) && fixed_mode) { 985 status = intel_panel_mode_valid(connector, mode); 986 if (status != MODE_OK) 987 return status; 988 989 target_clock = fixed_mode->clock; 990 } 991 992 if (mode->clock < 10000) 993 return MODE_CLOCK_LOW; 994 995 if (intel_dp_need_bigjoiner(intel_dp, mode->hdisplay, target_clock)) { 996 bigjoiner = true; 997 max_dotclk *= 2; 998 } 999 if (target_clock > max_dotclk) 1000 return MODE_CLOCK_HIGH; 1001 1002 max_link_clock = intel_dp_max_link_rate(intel_dp); 1003 max_lanes = intel_dp_max_lane_count(intel_dp); 1004 1005 max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); 1006 mode_rate = intel_dp_link_required(target_clock, 1007 intel_dp_mode_min_output_bpp(connector, mode)); 1008 1009 if (intel_dp_hdisplay_bad(dev_priv, mode->hdisplay)) 1010 return MODE_H_ILLEGAL; 1011 1012 /* 1013 * Output bpp is stored in 6.4 format so right shift by 4 to get the 1014 * integer value since we support only integer values of bpp. 1015 */ 1016 if (DISPLAY_VER(dev_priv) >= 10 && 1017 drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) { 1018 /* 1019 * TBD pass the connector BPC, 1020 * for now U8_MAX so that max BPC on that platform would be picked 1021 */ 1022 int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX); 1023 1024 if (intel_dp_is_edp(intel_dp)) { 1025 dsc_max_output_bpp = 1026 drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4; 1027 dsc_slice_count = 1028 drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, 1029 true); 1030 } else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) { 1031 dsc_max_output_bpp = 1032 intel_dp_dsc_get_output_bpp(dev_priv, 1033 max_link_clock, 1034 max_lanes, 1035 target_clock, 1036 mode->hdisplay, 1037 bigjoiner, 1038 pipe_bpp) >> 4; 1039 dsc_slice_count = 1040 intel_dp_dsc_get_slice_count(intel_dp, 1041 target_clock, 1042 mode->hdisplay, 1043 bigjoiner); 1044 } 1045 1046 dsc = dsc_max_output_bpp && dsc_slice_count; 1047 } 1048 1049 /* 1050 * Big joiner configuration needs DSC for TGL which is not true for 1051 * XE_LPD where uncompressed joiner is supported. 1052 */ 1053 if (DISPLAY_VER(dev_priv) < 13 && bigjoiner && !dsc) 1054 return MODE_CLOCK_HIGH; 1055 1056 if (mode_rate > max_rate && !dsc) 1057 return MODE_CLOCK_HIGH; 1058 1059 status = intel_dp_mode_valid_downstream(connector, mode, target_clock); 1060 if (status != MODE_OK) 1061 return status; 1062 1063 return intel_mode_valid_max_plane_size(dev_priv, mode, bigjoiner); 1064 } 1065 1066 bool intel_dp_source_supports_tps3(struct drm_i915_private *i915) 1067 { 1068 return DISPLAY_VER(i915) >= 9 || IS_BROADWELL(i915) || IS_HASWELL(i915); 1069 } 1070 1071 bool intel_dp_source_supports_tps4(struct drm_i915_private *i915) 1072 { 1073 return DISPLAY_VER(i915) >= 10; 1074 } 1075 1076 static void snprintf_int_array(char *str, size_t len, 1077 const int *array, int nelem) 1078 { 1079 int i; 1080 1081 str[0] = '\0'; 1082 1083 for (i = 0; i < nelem; i++) { 1084 int r = snprintf(str, len, "%s%d", i ? ", " : "", array[i]); 1085 if (r >= len) 1086 return; 1087 str += r; 1088 len -= r; 1089 } 1090 } 1091 1092 static void intel_dp_print_rates(struct intel_dp *intel_dp) 1093 { 1094 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1095 char str[128]; /* FIXME: too big for stack? */ 1096 1097 if (!drm_debug_enabled(DRM_UT_KMS)) 1098 return; 1099 1100 snprintf_int_array(str, sizeof(str), 1101 intel_dp->source_rates, intel_dp->num_source_rates); 1102 drm_dbg_kms(&i915->drm, "source rates: %s\n", str); 1103 1104 snprintf_int_array(str, sizeof(str), 1105 intel_dp->sink_rates, intel_dp->num_sink_rates); 1106 drm_dbg_kms(&i915->drm, "sink rates: %s\n", str); 1107 1108 snprintf_int_array(str, sizeof(str), 1109 intel_dp->common_rates, intel_dp->num_common_rates); 1110 drm_dbg_kms(&i915->drm, "common rates: %s\n", str); 1111 } 1112 1113 int 1114 intel_dp_max_link_rate(struct intel_dp *intel_dp) 1115 { 1116 int len; 1117 1118 len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->max_link_rate); 1119 1120 return intel_dp_common_rate(intel_dp, len - 1); 1121 } 1122 1123 int intel_dp_rate_select(struct intel_dp *intel_dp, int rate) 1124 { 1125 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1126 int i = intel_dp_rate_index(intel_dp->sink_rates, 1127 intel_dp->num_sink_rates, rate); 1128 1129 if (drm_WARN_ON(&i915->drm, i < 0)) 1130 i = 0; 1131 1132 return i; 1133 } 1134 1135 void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, 1136 u8 *link_bw, u8 *rate_select) 1137 { 1138 /* eDP 1.4 rate select method. */ 1139 if (intel_dp->use_rate_select) { 1140 *link_bw = 0; 1141 *rate_select = 1142 intel_dp_rate_select(intel_dp, port_clock); 1143 } else { 1144 *link_bw = drm_dp_link_rate_to_bw_code(port_clock); 1145 *rate_select = 0; 1146 } 1147 } 1148 1149 static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp, 1150 const struct intel_crtc_state *pipe_config) 1151 { 1152 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 1153 1154 /* On TGL, FEC is supported on all Pipes */ 1155 if (DISPLAY_VER(dev_priv) >= 12) 1156 return true; 1157 1158 if (DISPLAY_VER(dev_priv) == 11 && pipe_config->cpu_transcoder != TRANSCODER_A) 1159 return true; 1160 1161 return false; 1162 } 1163 1164 static bool intel_dp_supports_fec(struct intel_dp *intel_dp, 1165 const struct intel_crtc_state *pipe_config) 1166 { 1167 return intel_dp_source_supports_fec(intel_dp, pipe_config) && 1168 drm_dp_sink_supports_fec(intel_dp->fec_capable); 1169 } 1170 1171 static bool intel_dp_supports_dsc(struct intel_dp *intel_dp, 1172 const struct intel_crtc_state *crtc_state) 1173 { 1174 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP) && !crtc_state->fec_enable) 1175 return false; 1176 1177 return intel_dsc_source_support(crtc_state) && 1178 drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd); 1179 } 1180 1181 static bool intel_dp_is_ycbcr420(struct intel_dp *intel_dp, 1182 const struct intel_crtc_state *crtc_state) 1183 { 1184 return crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || 1185 (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 && 1186 intel_dp->dfp.ycbcr_444_to_420); 1187 } 1188 1189 static int intel_dp_hdmi_compute_bpc(struct intel_dp *intel_dp, 1190 const struct intel_crtc_state *crtc_state, 1191 int bpc, bool respect_downstream_limits) 1192 { 1193 bool ycbcr420_output = intel_dp_is_ycbcr420(intel_dp, crtc_state); 1194 int clock = crtc_state->hw.adjusted_mode.crtc_clock; 1195 1196 /* 1197 * Current bpc could already be below 8bpc due to 1198 * FDI bandwidth constraints or other limits. 1199 * HDMI minimum is 8bpc however. 1200 */ 1201 bpc = max(bpc, 8); 1202 1203 /* 1204 * We will never exceed downstream TMDS clock limits while 1205 * attempting deep color. If the user insists on forcing an 1206 * out of spec mode they will have to be satisfied with 8bpc. 1207 */ 1208 if (!respect_downstream_limits) 1209 bpc = 8; 1210 1211 for (; bpc >= 8; bpc -= 2) { 1212 if (intel_hdmi_bpc_possible(crtc_state, bpc, 1213 intel_dp->has_hdmi_sink, ycbcr420_output) && 1214 intel_dp_tmds_clock_valid(intel_dp, clock, bpc, ycbcr420_output, 1215 respect_downstream_limits) == MODE_OK) 1216 return bpc; 1217 } 1218 1219 return -EINVAL; 1220 } 1221 1222 static int intel_dp_max_bpp(struct intel_dp *intel_dp, 1223 const struct intel_crtc_state *crtc_state, 1224 bool respect_downstream_limits) 1225 { 1226 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 1227 struct intel_connector *intel_connector = intel_dp->attached_connector; 1228 int bpp, bpc; 1229 1230 bpc = crtc_state->pipe_bpp / 3; 1231 1232 if (intel_dp->dfp.max_bpc) 1233 bpc = min_t(int, bpc, intel_dp->dfp.max_bpc); 1234 1235 if (intel_dp->dfp.min_tmds_clock) { 1236 int max_hdmi_bpc; 1237 1238 max_hdmi_bpc = intel_dp_hdmi_compute_bpc(intel_dp, crtc_state, bpc, 1239 respect_downstream_limits); 1240 if (max_hdmi_bpc < 0) 1241 return 0; 1242 1243 bpc = min(bpc, max_hdmi_bpc); 1244 } 1245 1246 bpp = bpc * 3; 1247 if (intel_dp_is_edp(intel_dp)) { 1248 /* Get bpp from vbt only for panels that dont have bpp in edid */ 1249 if (intel_connector->base.display_info.bpc == 0 && 1250 intel_connector->panel.vbt.edp.bpp && 1251 intel_connector->panel.vbt.edp.bpp < bpp) { 1252 drm_dbg_kms(&dev_priv->drm, 1253 "clamping bpp for eDP panel to BIOS-provided %i\n", 1254 intel_connector->panel.vbt.edp.bpp); 1255 bpp = intel_connector->panel.vbt.edp.bpp; 1256 } 1257 } 1258 1259 return bpp; 1260 } 1261 1262 /* Adjust link config limits based on compliance test requests. */ 1263 void 1264 intel_dp_adjust_compliance_config(struct intel_dp *intel_dp, 1265 struct intel_crtc_state *pipe_config, 1266 struct link_config_limits *limits) 1267 { 1268 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1269 1270 /* For DP Compliance we override the computed bpp for the pipe */ 1271 if (intel_dp->compliance.test_data.bpc != 0) { 1272 int bpp = 3 * intel_dp->compliance.test_data.bpc; 1273 1274 limits->min_bpp = limits->max_bpp = bpp; 1275 pipe_config->dither_force_disable = bpp == 6 * 3; 1276 1277 drm_dbg_kms(&i915->drm, "Setting pipe_bpp to %d\n", bpp); 1278 } 1279 1280 /* Use values requested by Compliance Test Request */ 1281 if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) { 1282 int index; 1283 1284 /* Validate the compliance test data since max values 1285 * might have changed due to link train fallback. 1286 */ 1287 if (intel_dp_link_params_valid(intel_dp, intel_dp->compliance.test_link_rate, 1288 intel_dp->compliance.test_lane_count)) { 1289 index = intel_dp_rate_index(intel_dp->common_rates, 1290 intel_dp->num_common_rates, 1291 intel_dp->compliance.test_link_rate); 1292 if (index >= 0) 1293 limits->min_rate = limits->max_rate = 1294 intel_dp->compliance.test_link_rate; 1295 limits->min_lane_count = limits->max_lane_count = 1296 intel_dp->compliance.test_lane_count; 1297 } 1298 } 1299 } 1300 1301 static bool has_seamless_m_n(struct intel_connector *connector) 1302 { 1303 struct drm_i915_private *i915 = to_i915(connector->base.dev); 1304 1305 /* 1306 * Seamless M/N reprogramming only implemented 1307 * for BDW+ double buffered M/N registers so far. 1308 */ 1309 return HAS_DOUBLE_BUFFERED_M_N(i915) && 1310 intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS; 1311 } 1312 1313 static int intel_dp_mode_clock(const struct intel_crtc_state *crtc_state, 1314 const struct drm_connector_state *conn_state) 1315 { 1316 struct intel_connector *connector = to_intel_connector(conn_state->connector); 1317 const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; 1318 1319 /* FIXME a bit of a mess wrt clock vs. crtc_clock */ 1320 if (has_seamless_m_n(connector)) 1321 return intel_panel_highest_mode(connector, adjusted_mode)->clock; 1322 else 1323 return adjusted_mode->crtc_clock; 1324 } 1325 1326 /* Optimize link config in order: max bpp, min clock, min lanes */ 1327 static int 1328 intel_dp_compute_link_config_wide(struct intel_dp *intel_dp, 1329 struct intel_crtc_state *pipe_config, 1330 const struct drm_connector_state *conn_state, 1331 const struct link_config_limits *limits) 1332 { 1333 int bpp, i, lane_count, clock = intel_dp_mode_clock(pipe_config, conn_state); 1334 int mode_rate, link_rate, link_avail; 1335 1336 for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) { 1337 int output_bpp = intel_dp_output_bpp(pipe_config->output_format, bpp); 1338 1339 mode_rate = intel_dp_link_required(clock, output_bpp); 1340 1341 for (i = 0; i < intel_dp->num_common_rates; i++) { 1342 link_rate = intel_dp_common_rate(intel_dp, i); 1343 if (link_rate < limits->min_rate || 1344 link_rate > limits->max_rate) 1345 continue; 1346 1347 for (lane_count = limits->min_lane_count; 1348 lane_count <= limits->max_lane_count; 1349 lane_count <<= 1) { 1350 link_avail = intel_dp_max_data_rate(link_rate, 1351 lane_count); 1352 1353 if (mode_rate <= link_avail) { 1354 pipe_config->lane_count = lane_count; 1355 pipe_config->pipe_bpp = bpp; 1356 pipe_config->port_clock = link_rate; 1357 1358 return 0; 1359 } 1360 } 1361 } 1362 } 1363 1364 return -EINVAL; 1365 } 1366 1367 static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc) 1368 { 1369 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1370 int i, num_bpc; 1371 u8 dsc_bpc[3] = {0}; 1372 u8 dsc_max_bpc; 1373 1374 /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */ 1375 if (DISPLAY_VER(i915) >= 12) 1376 dsc_max_bpc = min_t(u8, 12, max_req_bpc); 1377 else 1378 dsc_max_bpc = min_t(u8, 10, max_req_bpc); 1379 1380 num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd, 1381 dsc_bpc); 1382 for (i = 0; i < num_bpc; i++) { 1383 if (dsc_max_bpc >= dsc_bpc[i]) 1384 return dsc_bpc[i] * 3; 1385 } 1386 1387 return 0; 1388 } 1389 1390 static int intel_dp_source_dsc_version_minor(struct intel_dp *intel_dp) 1391 { 1392 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1393 1394 return DISPLAY_VER(i915) >= 14 ? 2 : 1; 1395 } 1396 1397 static int intel_dp_sink_dsc_version_minor(struct intel_dp *intel_dp) 1398 { 1399 return (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & DP_DSC_MINOR_MASK) >> 1400 DP_DSC_MINOR_SHIFT; 1401 } 1402 1403 static int intel_dp_dsc_compute_params(struct intel_encoder *encoder, 1404 struct intel_crtc_state *crtc_state) 1405 { 1406 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1407 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1408 struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config; 1409 u8 line_buf_depth; 1410 int ret; 1411 1412 /* 1413 * RC_MODEL_SIZE is currently a constant across all configurations. 1414 * 1415 * FIXME: Look into using sink defined DPCD DP_DSC_RC_BUF_BLK_SIZE and 1416 * DP_DSC_RC_BUF_SIZE for this. 1417 */ 1418 vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST; 1419 vdsc_cfg->pic_height = crtc_state->hw.adjusted_mode.crtc_vdisplay; 1420 1421 /* 1422 * Slice Height of 8 works for all currently available panels. So start 1423 * with that if pic_height is an integral multiple of 8. Eventually add 1424 * logic to try multiple slice heights. 1425 */ 1426 if (vdsc_cfg->pic_height % 8 == 0) 1427 vdsc_cfg->slice_height = 8; 1428 else if (vdsc_cfg->pic_height % 4 == 0) 1429 vdsc_cfg->slice_height = 4; 1430 else 1431 vdsc_cfg->slice_height = 2; 1432 1433 ret = intel_dsc_compute_params(crtc_state); 1434 if (ret) 1435 return ret; 1436 1437 vdsc_cfg->dsc_version_major = 1438 (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & 1439 DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT; 1440 vdsc_cfg->dsc_version_minor = 1441 min(intel_dp_source_dsc_version_minor(intel_dp), 1442 intel_dp_sink_dsc_version_minor(intel_dp)); 1443 1444 vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] & 1445 DP_DSC_RGB; 1446 1447 line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd); 1448 if (!line_buf_depth) { 1449 drm_dbg_kms(&i915->drm, 1450 "DSC Sink Line Buffer Depth invalid\n"); 1451 return -EINVAL; 1452 } 1453 1454 if (vdsc_cfg->dsc_version_minor == 2) 1455 vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ? 1456 DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth; 1457 else 1458 vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ? 1459 DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth; 1460 1461 vdsc_cfg->block_pred_enable = 1462 intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] & 1463 DP_DSC_BLK_PREDICTION_IS_SUPPORTED; 1464 1465 return drm_dsc_compute_rc_parameters(vdsc_cfg); 1466 } 1467 1468 static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, 1469 struct intel_crtc_state *pipe_config, 1470 struct drm_connector_state *conn_state, 1471 struct link_config_limits *limits) 1472 { 1473 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 1474 struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); 1475 const struct drm_display_mode *adjusted_mode = 1476 &pipe_config->hw.adjusted_mode; 1477 int pipe_bpp; 1478 int ret; 1479 1480 pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) && 1481 intel_dp_supports_fec(intel_dp, pipe_config); 1482 1483 if (!intel_dp_supports_dsc(intel_dp, pipe_config)) 1484 return -EINVAL; 1485 1486 pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, conn_state->max_requested_bpc); 1487 1488 if (intel_dp->force_dsc_bpc) { 1489 pipe_bpp = intel_dp->force_dsc_bpc * 3; 1490 drm_dbg_kms(&dev_priv->drm, "Input DSC BPP forced to %d", pipe_bpp); 1491 } 1492 1493 /* Min Input BPC for ICL+ is 8 */ 1494 if (pipe_bpp < 8 * 3) { 1495 drm_dbg_kms(&dev_priv->drm, 1496 "No DSC support for less than 8bpc\n"); 1497 return -EINVAL; 1498 } 1499 1500 /* 1501 * For now enable DSC for max bpp, max link rate, max lane count. 1502 * Optimize this later for the minimum possible link rate/lane count 1503 * with DSC enabled for the requested mode. 1504 */ 1505 pipe_config->pipe_bpp = pipe_bpp; 1506 pipe_config->port_clock = limits->max_rate; 1507 pipe_config->lane_count = limits->max_lane_count; 1508 1509 if (intel_dp_is_edp(intel_dp)) { 1510 pipe_config->dsc.compressed_bpp = 1511 min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4, 1512 pipe_config->pipe_bpp); 1513 pipe_config->dsc.slice_count = 1514 drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, 1515 true); 1516 } else { 1517 u16 dsc_max_output_bpp; 1518 u8 dsc_dp_slice_count; 1519 1520 dsc_max_output_bpp = 1521 intel_dp_dsc_get_output_bpp(dev_priv, 1522 pipe_config->port_clock, 1523 pipe_config->lane_count, 1524 adjusted_mode->crtc_clock, 1525 adjusted_mode->crtc_hdisplay, 1526 pipe_config->bigjoiner_pipes, 1527 pipe_bpp); 1528 dsc_dp_slice_count = 1529 intel_dp_dsc_get_slice_count(intel_dp, 1530 adjusted_mode->crtc_clock, 1531 adjusted_mode->crtc_hdisplay, 1532 pipe_config->bigjoiner_pipes); 1533 if (!dsc_max_output_bpp || !dsc_dp_slice_count) { 1534 drm_dbg_kms(&dev_priv->drm, 1535 "Compressed BPP/Slice Count not supported\n"); 1536 return -EINVAL; 1537 } 1538 pipe_config->dsc.compressed_bpp = min_t(u16, 1539 dsc_max_output_bpp >> 4, 1540 pipe_config->pipe_bpp); 1541 pipe_config->dsc.slice_count = dsc_dp_slice_count; 1542 } 1543 1544 /* 1545 * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate 1546 * is greater than the maximum Cdclock and if slice count is even 1547 * then we need to use 2 VDSC instances. 1548 */ 1549 if (adjusted_mode->crtc_clock > dev_priv->display.cdclk.max_cdclk_freq || 1550 pipe_config->bigjoiner_pipes) { 1551 if (pipe_config->dsc.slice_count < 2) { 1552 drm_dbg_kms(&dev_priv->drm, 1553 "Cannot split stream to use 2 VDSC instances\n"); 1554 return -EINVAL; 1555 } 1556 1557 pipe_config->dsc.dsc_split = true; 1558 } 1559 1560 ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config); 1561 if (ret < 0) { 1562 drm_dbg_kms(&dev_priv->drm, 1563 "Cannot compute valid DSC parameters for Input Bpp = %d " 1564 "Compressed BPP = %d\n", 1565 pipe_config->pipe_bpp, 1566 pipe_config->dsc.compressed_bpp); 1567 return ret; 1568 } 1569 1570 pipe_config->dsc.compression_enable = true; 1571 drm_dbg_kms(&dev_priv->drm, "DP DSC computed with Input Bpp = %d " 1572 "Compressed Bpp = %d Slice Count = %d\n", 1573 pipe_config->pipe_bpp, 1574 pipe_config->dsc.compressed_bpp, 1575 pipe_config->dsc.slice_count); 1576 1577 return 0; 1578 } 1579 1580 static int 1581 intel_dp_compute_link_config(struct intel_encoder *encoder, 1582 struct intel_crtc_state *pipe_config, 1583 struct drm_connector_state *conn_state, 1584 bool respect_downstream_limits) 1585 { 1586 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1587 struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); 1588 const struct drm_display_mode *adjusted_mode = 1589 &pipe_config->hw.adjusted_mode; 1590 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1591 struct link_config_limits limits; 1592 bool joiner_needs_dsc = false; 1593 int ret; 1594 1595 limits.min_rate = intel_dp_common_rate(intel_dp, 0); 1596 limits.max_rate = intel_dp_max_link_rate(intel_dp); 1597 1598 limits.min_lane_count = 1; 1599 limits.max_lane_count = intel_dp_max_lane_count(intel_dp); 1600 1601 limits.min_bpp = intel_dp_min_bpp(pipe_config->output_format); 1602 limits.max_bpp = intel_dp_max_bpp(intel_dp, pipe_config, respect_downstream_limits); 1603 1604 if (intel_dp->use_max_params) { 1605 /* 1606 * Use the maximum clock and number of lanes the eDP panel 1607 * advertizes being capable of in case the initial fast 1608 * optimal params failed us. The panels are generally 1609 * designed to support only a single clock and lane 1610 * configuration, and typically on older panels these 1611 * values correspond to the native resolution of the panel. 1612 */ 1613 limits.min_lane_count = limits.max_lane_count; 1614 limits.min_rate = limits.max_rate; 1615 } 1616 1617 intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits); 1618 1619 drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i " 1620 "max rate %d max bpp %d pixel clock %iKHz\n", 1621 limits.max_lane_count, limits.max_rate, 1622 limits.max_bpp, adjusted_mode->crtc_clock); 1623 1624 if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay, 1625 adjusted_mode->crtc_clock)) 1626 pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe); 1627 1628 /* 1629 * Pipe joiner needs compression up to display 12 due to bandwidth 1630 * limitation. DG2 onwards pipe joiner can be enabled without 1631 * compression. 1632 */ 1633 joiner_needs_dsc = DISPLAY_VER(i915) < 13 && pipe_config->bigjoiner_pipes; 1634 1635 /* 1636 * Optimize for slow and wide for everything, because there are some 1637 * eDP 1.3 and 1.4 panels don't work well with fast and narrow. 1638 */ 1639 ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, conn_state, &limits); 1640 1641 if (ret || joiner_needs_dsc || intel_dp->force_dsc_en) { 1642 drm_dbg_kms(&i915->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n", 1643 str_yes_no(ret), str_yes_no(joiner_needs_dsc), 1644 str_yes_no(intel_dp->force_dsc_en)); 1645 ret = intel_dp_dsc_compute_config(intel_dp, pipe_config, 1646 conn_state, &limits); 1647 if (ret < 0) 1648 return ret; 1649 } 1650 1651 if (pipe_config->dsc.compression_enable) { 1652 drm_dbg_kms(&i915->drm, 1653 "DP lane count %d clock %d Input bpp %d Compressed bpp %d\n", 1654 pipe_config->lane_count, pipe_config->port_clock, 1655 pipe_config->pipe_bpp, 1656 pipe_config->dsc.compressed_bpp); 1657 1658 drm_dbg_kms(&i915->drm, 1659 "DP link rate required %i available %i\n", 1660 intel_dp_link_required(adjusted_mode->crtc_clock, 1661 pipe_config->dsc.compressed_bpp), 1662 intel_dp_max_data_rate(pipe_config->port_clock, 1663 pipe_config->lane_count)); 1664 } else { 1665 drm_dbg_kms(&i915->drm, "DP lane count %d clock %d bpp %d\n", 1666 pipe_config->lane_count, pipe_config->port_clock, 1667 pipe_config->pipe_bpp); 1668 1669 drm_dbg_kms(&i915->drm, 1670 "DP link rate required %i available %i\n", 1671 intel_dp_link_required(adjusted_mode->crtc_clock, 1672 pipe_config->pipe_bpp), 1673 intel_dp_max_data_rate(pipe_config->port_clock, 1674 pipe_config->lane_count)); 1675 } 1676 return 0; 1677 } 1678 1679 bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state, 1680 const struct drm_connector_state *conn_state) 1681 { 1682 const struct intel_digital_connector_state *intel_conn_state = 1683 to_intel_digital_connector_state(conn_state); 1684 const struct drm_display_mode *adjusted_mode = 1685 &crtc_state->hw.adjusted_mode; 1686 1687 /* 1688 * Our YCbCr output is always limited range. 1689 * crtc_state->limited_color_range only applies to RGB, 1690 * and it must never be set for YCbCr or we risk setting 1691 * some conflicting bits in PIPECONF which will mess up 1692 * the colors on the monitor. 1693 */ 1694 if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) 1695 return false; 1696 1697 if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) { 1698 /* 1699 * See: 1700 * CEA-861-E - 5.1 Default Encoding Parameters 1701 * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry 1702 */ 1703 return crtc_state->pipe_bpp != 18 && 1704 drm_default_rgb_quant_range(adjusted_mode) == 1705 HDMI_QUANTIZATION_RANGE_LIMITED; 1706 } else { 1707 return intel_conn_state->broadcast_rgb == 1708 INTEL_BROADCAST_RGB_LIMITED; 1709 } 1710 } 1711 1712 static bool intel_dp_port_has_audio(struct drm_i915_private *dev_priv, 1713 enum port port) 1714 { 1715 if (IS_G4X(dev_priv)) 1716 return false; 1717 if (DISPLAY_VER(dev_priv) < 12 && port == PORT_A) 1718 return false; 1719 1720 return true; 1721 } 1722 1723 static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc_state, 1724 const struct drm_connector_state *conn_state, 1725 struct drm_dp_vsc_sdp *vsc) 1726 { 1727 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 1728 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); 1729 1730 /* 1731 * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 1732 * VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/ 1733 * Colorimetry Format indication. 1734 */ 1735 vsc->revision = 0x5; 1736 vsc->length = 0x13; 1737 1738 /* DP 1.4a spec, Table 2-120 */ 1739 switch (crtc_state->output_format) { 1740 case INTEL_OUTPUT_FORMAT_YCBCR444: 1741 vsc->pixelformat = DP_PIXELFORMAT_YUV444; 1742 break; 1743 case INTEL_OUTPUT_FORMAT_YCBCR420: 1744 vsc->pixelformat = DP_PIXELFORMAT_YUV420; 1745 break; 1746 case INTEL_OUTPUT_FORMAT_RGB: 1747 default: 1748 vsc->pixelformat = DP_PIXELFORMAT_RGB; 1749 } 1750 1751 switch (conn_state->colorspace) { 1752 case DRM_MODE_COLORIMETRY_BT709_YCC: 1753 vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; 1754 break; 1755 case DRM_MODE_COLORIMETRY_XVYCC_601: 1756 vsc->colorimetry = DP_COLORIMETRY_XVYCC_601; 1757 break; 1758 case DRM_MODE_COLORIMETRY_XVYCC_709: 1759 vsc->colorimetry = DP_COLORIMETRY_XVYCC_709; 1760 break; 1761 case DRM_MODE_COLORIMETRY_SYCC_601: 1762 vsc->colorimetry = DP_COLORIMETRY_SYCC_601; 1763 break; 1764 case DRM_MODE_COLORIMETRY_OPYCC_601: 1765 vsc->colorimetry = DP_COLORIMETRY_OPYCC_601; 1766 break; 1767 case DRM_MODE_COLORIMETRY_BT2020_CYCC: 1768 vsc->colorimetry = DP_COLORIMETRY_BT2020_CYCC; 1769 break; 1770 case DRM_MODE_COLORIMETRY_BT2020_RGB: 1771 vsc->colorimetry = DP_COLORIMETRY_BT2020_RGB; 1772 break; 1773 case DRM_MODE_COLORIMETRY_BT2020_YCC: 1774 vsc->colorimetry = DP_COLORIMETRY_BT2020_YCC; 1775 break; 1776 case DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65: 1777 case DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER: 1778 vsc->colorimetry = DP_COLORIMETRY_DCI_P3_RGB; 1779 break; 1780 default: 1781 /* 1782 * RGB->YCBCR color conversion uses the BT.709 1783 * color space. 1784 */ 1785 if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) 1786 vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; 1787 else 1788 vsc->colorimetry = DP_COLORIMETRY_DEFAULT; 1789 break; 1790 } 1791 1792 vsc->bpc = crtc_state->pipe_bpp / 3; 1793 1794 /* only RGB pixelformat supports 6 bpc */ 1795 drm_WARN_ON(&dev_priv->drm, 1796 vsc->bpc == 6 && vsc->pixelformat != DP_PIXELFORMAT_RGB); 1797 1798 /* all YCbCr are always limited range */ 1799 vsc->dynamic_range = DP_DYNAMIC_RANGE_CTA; 1800 vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED; 1801 } 1802 1803 static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp, 1804 struct intel_crtc_state *crtc_state, 1805 const struct drm_connector_state *conn_state) 1806 { 1807 struct drm_dp_vsc_sdp *vsc = &crtc_state->infoframes.vsc; 1808 1809 /* When a crtc state has PSR, VSC SDP will be handled by PSR routine */ 1810 if (crtc_state->has_psr) 1811 return; 1812 1813 if (!intel_dp_needs_vsc_sdp(crtc_state, conn_state)) 1814 return; 1815 1816 crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC); 1817 vsc->sdp_type = DP_SDP_VSC; 1818 intel_dp_compute_vsc_colorimetry(crtc_state, conn_state, 1819 &crtc_state->infoframes.vsc); 1820 } 1821 1822 void intel_dp_compute_psr_vsc_sdp(struct intel_dp *intel_dp, 1823 const struct intel_crtc_state *crtc_state, 1824 const struct drm_connector_state *conn_state, 1825 struct drm_dp_vsc_sdp *vsc) 1826 { 1827 vsc->sdp_type = DP_SDP_VSC; 1828 1829 if (crtc_state->has_psr2) { 1830 if (intel_dp->psr.colorimetry_support && 1831 intel_dp_needs_vsc_sdp(crtc_state, conn_state)) { 1832 /* [PSR2, +Colorimetry] */ 1833 intel_dp_compute_vsc_colorimetry(crtc_state, conn_state, 1834 vsc); 1835 } else { 1836 /* 1837 * [PSR2, -Colorimetry] 1838 * Prepare VSC Header for SU as per eDP 1.4 spec, Table 6-11 1839 * 3D stereo + PSR/PSR2 + Y-coordinate. 1840 */ 1841 vsc->revision = 0x4; 1842 vsc->length = 0xe; 1843 } 1844 } else { 1845 /* 1846 * [PSR1] 1847 * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 1848 * VSC SDP supporting 3D stereo + PSR (applies to eDP v1.3 or 1849 * higher). 1850 */ 1851 vsc->revision = 0x2; 1852 vsc->length = 0x8; 1853 } 1854 } 1855 1856 static void 1857 intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp, 1858 struct intel_crtc_state *crtc_state, 1859 const struct drm_connector_state *conn_state) 1860 { 1861 int ret; 1862 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 1863 struct hdmi_drm_infoframe *drm_infoframe = &crtc_state->infoframes.drm.drm; 1864 1865 if (!conn_state->hdr_output_metadata) 1866 return; 1867 1868 ret = drm_hdmi_infoframe_set_hdr_metadata(drm_infoframe, conn_state); 1869 1870 if (ret) { 1871 drm_dbg_kms(&dev_priv->drm, "couldn't set HDR metadata in infoframe\n"); 1872 return; 1873 } 1874 1875 crtc_state->infoframes.enable |= 1876 intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA); 1877 } 1878 1879 static bool cpu_transcoder_has_drrs(struct drm_i915_private *i915, 1880 enum transcoder cpu_transcoder) 1881 { 1882 if (HAS_DOUBLE_BUFFERED_M_N(i915)) 1883 return true; 1884 1885 return intel_cpu_transcoder_has_m2_n2(i915, cpu_transcoder); 1886 } 1887 1888 static bool can_enable_drrs(struct intel_connector *connector, 1889 const struct intel_crtc_state *pipe_config, 1890 const struct drm_display_mode *downclock_mode) 1891 { 1892 struct drm_i915_private *i915 = to_i915(connector->base.dev); 1893 1894 if (pipe_config->vrr.enable) 1895 return false; 1896 1897 /* 1898 * DRRS and PSR can't be enable together, so giving preference to PSR 1899 * as it allows more power-savings by complete shutting down display, 1900 * so to guarantee this, intel_drrs_compute_config() must be called 1901 * after intel_psr_compute_config(). 1902 */ 1903 if (pipe_config->has_psr) 1904 return false; 1905 1906 /* FIXME missing FDI M2/N2 etc. */ 1907 if (pipe_config->has_pch_encoder) 1908 return false; 1909 1910 if (!cpu_transcoder_has_drrs(i915, pipe_config->cpu_transcoder)) 1911 return false; 1912 1913 return downclock_mode && 1914 intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS; 1915 } 1916 1917 static void 1918 intel_dp_drrs_compute_config(struct intel_connector *connector, 1919 struct intel_crtc_state *pipe_config, 1920 int output_bpp) 1921 { 1922 struct drm_i915_private *i915 = to_i915(connector->base.dev); 1923 const struct drm_display_mode *downclock_mode = 1924 intel_panel_downclock_mode(connector, &pipe_config->hw.adjusted_mode); 1925 int pixel_clock; 1926 1927 if (has_seamless_m_n(connector)) 1928 pipe_config->seamless_m_n = true; 1929 1930 if (!can_enable_drrs(connector, pipe_config, downclock_mode)) { 1931 if (intel_cpu_transcoder_has_m2_n2(i915, pipe_config->cpu_transcoder)) 1932 intel_zero_m_n(&pipe_config->dp_m2_n2); 1933 return; 1934 } 1935 1936 if (IS_IRONLAKE(i915) || IS_SANDYBRIDGE(i915) || IS_IVYBRIDGE(i915)) 1937 pipe_config->msa_timing_delay = connector->panel.vbt.edp.drrs_msa_timing_delay; 1938 1939 pipe_config->has_drrs = true; 1940 1941 pixel_clock = downclock_mode->clock; 1942 if (pipe_config->splitter.enable) 1943 pixel_clock /= pipe_config->splitter.link_count; 1944 1945 intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock, 1946 pipe_config->port_clock, &pipe_config->dp_m2_n2, 1947 pipe_config->fec_enable); 1948 1949 /* FIXME: abstract this better */ 1950 if (pipe_config->splitter.enable) 1951 pipe_config->dp_m2_n2.data_m *= pipe_config->splitter.link_count; 1952 } 1953 1954 static bool intel_dp_has_audio(struct intel_encoder *encoder, 1955 const struct intel_crtc_state *crtc_state, 1956 const struct drm_connector_state *conn_state) 1957 { 1958 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1959 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1960 const struct intel_digital_connector_state *intel_conn_state = 1961 to_intel_digital_connector_state(conn_state); 1962 1963 if (!intel_dp_port_has_audio(i915, encoder->port)) 1964 return false; 1965 1966 if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO) 1967 return intel_dp->has_audio; 1968 else 1969 return intel_conn_state->force_audio == HDMI_AUDIO_ON; 1970 } 1971 1972 static int 1973 intel_dp_compute_output_format(struct intel_encoder *encoder, 1974 struct intel_crtc_state *crtc_state, 1975 struct drm_connector_state *conn_state, 1976 bool respect_downstream_limits) 1977 { 1978 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1979 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1980 struct intel_connector *connector = intel_dp->attached_connector; 1981 const struct drm_display_info *info = &connector->base.display_info; 1982 const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; 1983 bool ycbcr_420_only; 1984 int ret; 1985 1986 ycbcr_420_only = drm_mode_is_420_only(info, adjusted_mode); 1987 1988 crtc_state->output_format = intel_dp_output_format(connector, ycbcr_420_only); 1989 1990 if (ycbcr_420_only && !intel_dp_is_ycbcr420(intel_dp, crtc_state)) { 1991 drm_dbg_kms(&i915->drm, 1992 "YCbCr 4:2:0 mode but YCbCr 4:2:0 output not possible. Falling back to RGB.\n"); 1993 crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB; 1994 } 1995 1996 ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state, 1997 respect_downstream_limits); 1998 if (ret) { 1999 if (intel_dp_is_ycbcr420(intel_dp, crtc_state) || 2000 !connector->base.ycbcr_420_allowed || 2001 !drm_mode_is_420_also(info, adjusted_mode)) 2002 return ret; 2003 2004 crtc_state->output_format = intel_dp_output_format(connector, true); 2005 ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state, 2006 respect_downstream_limits); 2007 } 2008 2009 return ret; 2010 } 2011 2012 int 2013 intel_dp_compute_config(struct intel_encoder *encoder, 2014 struct intel_crtc_state *pipe_config, 2015 struct drm_connector_state *conn_state) 2016 { 2017 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 2018 struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; 2019 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2020 const struct drm_display_mode *fixed_mode; 2021 struct intel_connector *connector = intel_dp->attached_connector; 2022 int ret = 0, output_bpp; 2023 2024 if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && encoder->port != PORT_A) 2025 pipe_config->has_pch_encoder = true; 2026 2027 pipe_config->has_audio = intel_dp_has_audio(encoder, pipe_config, conn_state); 2028 2029 fixed_mode = intel_panel_fixed_mode(connector, adjusted_mode); 2030 if (intel_dp_is_edp(intel_dp) && fixed_mode) { 2031 ret = intel_panel_compute_config(connector, adjusted_mode); 2032 if (ret) 2033 return ret; 2034 } 2035 2036 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 2037 return -EINVAL; 2038 2039 if (HAS_GMCH(dev_priv) && 2040 adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) 2041 return -EINVAL; 2042 2043 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) 2044 return -EINVAL; 2045 2046 if (intel_dp_hdisplay_bad(dev_priv, adjusted_mode->crtc_hdisplay)) 2047 return -EINVAL; 2048 2049 /* 2050 * Try to respect downstream TMDS clock limits first, if 2051 * that fails assume the user might know something we don't. 2052 */ 2053 ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, true); 2054 if (ret) 2055 ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, false); 2056 if (ret) 2057 return ret; 2058 2059 if ((intel_dp_is_edp(intel_dp) && fixed_mode) || 2060 pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { 2061 ret = intel_panel_fitting(pipe_config, conn_state); 2062 if (ret) 2063 return ret; 2064 } 2065 2066 pipe_config->limited_color_range = 2067 intel_dp_limited_color_range(pipe_config, conn_state); 2068 2069 if (pipe_config->dsc.compression_enable) 2070 output_bpp = pipe_config->dsc.compressed_bpp; 2071 else 2072 output_bpp = intel_dp_output_bpp(pipe_config->output_format, 2073 pipe_config->pipe_bpp); 2074 2075 if (intel_dp->mso_link_count) { 2076 int n = intel_dp->mso_link_count; 2077 int overlap = intel_dp->mso_pixel_overlap; 2078 2079 pipe_config->splitter.enable = true; 2080 pipe_config->splitter.link_count = n; 2081 pipe_config->splitter.pixel_overlap = overlap; 2082 2083 drm_dbg_kms(&dev_priv->drm, "MSO link count %d, pixel overlap %d\n", 2084 n, overlap); 2085 2086 adjusted_mode->crtc_hdisplay = adjusted_mode->crtc_hdisplay / n + overlap; 2087 adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hblank_start / n + overlap; 2088 adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_hblank_end / n + overlap; 2089 adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hsync_start / n + overlap; 2090 adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_end / n + overlap; 2091 adjusted_mode->crtc_htotal = adjusted_mode->crtc_htotal / n + overlap; 2092 adjusted_mode->crtc_clock /= n; 2093 } 2094 2095 intel_link_compute_m_n(output_bpp, 2096 pipe_config->lane_count, 2097 adjusted_mode->crtc_clock, 2098 pipe_config->port_clock, 2099 &pipe_config->dp_m_n, 2100 pipe_config->fec_enable); 2101 2102 /* FIXME: abstract this better */ 2103 if (pipe_config->splitter.enable) 2104 pipe_config->dp_m_n.data_m *= pipe_config->splitter.link_count; 2105 2106 if (!HAS_DDI(dev_priv)) 2107 g4x_dp_set_clock(encoder, pipe_config); 2108 2109 intel_vrr_compute_config(pipe_config, conn_state); 2110 intel_psr_compute_config(intel_dp, pipe_config, conn_state); 2111 intel_dp_drrs_compute_config(connector, pipe_config, output_bpp); 2112 intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state); 2113 intel_dp_compute_hdr_metadata_infoframe_sdp(intel_dp, pipe_config, conn_state); 2114 2115 return 0; 2116 } 2117 2118 void intel_dp_set_link_params(struct intel_dp *intel_dp, 2119 int link_rate, int lane_count) 2120 { 2121 memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); 2122 intel_dp->link_trained = false; 2123 intel_dp->link_rate = link_rate; 2124 intel_dp->lane_count = lane_count; 2125 } 2126 2127 static void intel_dp_reset_max_link_params(struct intel_dp *intel_dp) 2128 { 2129 intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp); 2130 intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp); 2131 } 2132 2133 /* Enable backlight PWM and backlight PP control. */ 2134 void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state, 2135 const struct drm_connector_state *conn_state) 2136 { 2137 struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(conn_state->best_encoder)); 2138 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2139 2140 if (!intel_dp_is_edp(intel_dp)) 2141 return; 2142 2143 drm_dbg_kms(&i915->drm, "\n"); 2144 2145 intel_backlight_enable(crtc_state, conn_state); 2146 intel_pps_backlight_on(intel_dp); 2147 } 2148 2149 /* Disable backlight PP control and backlight PWM. */ 2150 void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state) 2151 { 2152 struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder)); 2153 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2154 2155 if (!intel_dp_is_edp(intel_dp)) 2156 return; 2157 2158 drm_dbg_kms(&i915->drm, "\n"); 2159 2160 intel_pps_backlight_off(intel_dp); 2161 intel_backlight_disable(old_conn_state); 2162 } 2163 2164 static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp) 2165 { 2166 /* 2167 * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus 2168 * be capable of signalling downstream hpd with a long pulse. 2169 * Whether or not that means D3 is safe to use is not clear, 2170 * but let's assume so until proven otherwise. 2171 * 2172 * FIXME should really check all downstream ports... 2173 */ 2174 return intel_dp->dpcd[DP_DPCD_REV] == 0x11 && 2175 drm_dp_is_branch(intel_dp->dpcd) && 2176 intel_dp->downstream_ports[0] & DP_DS_PORT_HPD; 2177 } 2178 2179 void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp, 2180 const struct intel_crtc_state *crtc_state, 2181 bool enable) 2182 { 2183 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2184 int ret; 2185 2186 if (!crtc_state->dsc.compression_enable) 2187 return; 2188 2189 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_DSC_ENABLE, 2190 enable ? DP_DECOMPRESSION_EN : 0); 2191 if (ret < 0) 2192 drm_dbg_kms(&i915->drm, 2193 "Failed to %s sink decompression state\n", 2194 str_enable_disable(enable)); 2195 } 2196 2197 static void 2198 intel_edp_init_source_oui(struct intel_dp *intel_dp, bool careful) 2199 { 2200 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2201 u8 oui[] = { 0x00, 0xaa, 0x01 }; 2202 u8 buf[3] = { 0 }; 2203 2204 /* 2205 * During driver init, we want to be careful and avoid changing the source OUI if it's 2206 * already set to what we want, so as to avoid clearing any state by accident 2207 */ 2208 if (careful) { 2209 if (drm_dp_dpcd_read(&intel_dp->aux, DP_SOURCE_OUI, buf, sizeof(buf)) < 0) 2210 drm_err(&i915->drm, "Failed to read source OUI\n"); 2211 2212 if (memcmp(oui, buf, sizeof(oui)) == 0) 2213 return; 2214 } 2215 2216 if (drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, oui, sizeof(oui)) < 0) 2217 drm_err(&i915->drm, "Failed to write source OUI\n"); 2218 2219 intel_dp->last_oui_write = jiffies; 2220 } 2221 2222 void intel_dp_wait_source_oui(struct intel_dp *intel_dp) 2223 { 2224 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2225 2226 drm_dbg_kms(&i915->drm, "Performing OUI wait\n"); 2227 wait_remaining_ms_from_jiffies(intel_dp->last_oui_write, 30); 2228 } 2229 2230 /* If the device supports it, try to set the power state appropriately */ 2231 void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode) 2232 { 2233 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 2234 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 2235 int ret, i; 2236 2237 /* Should have a valid DPCD by this point */ 2238 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) 2239 return; 2240 2241 if (mode != DP_SET_POWER_D0) { 2242 if (downstream_hpd_needs_d0(intel_dp)) 2243 return; 2244 2245 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); 2246 } else { 2247 struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp); 2248 2249 lspcon_resume(dp_to_dig_port(intel_dp)); 2250 2251 /* Write the source OUI as early as possible */ 2252 if (intel_dp_is_edp(intel_dp)) 2253 intel_edp_init_source_oui(intel_dp, false); 2254 2255 /* 2256 * When turning on, we need to retry for 1ms to give the sink 2257 * time to wake up. 2258 */ 2259 for (i = 0; i < 3; i++) { 2260 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); 2261 if (ret == 1) 2262 break; 2263 msleep(1); 2264 } 2265 2266 if (ret == 1 && lspcon->active) 2267 lspcon_wait_pcon_mode(lspcon); 2268 } 2269 2270 if (ret != 1) 2271 drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Set power to %s failed\n", 2272 encoder->base.base.id, encoder->base.name, 2273 mode == DP_SET_POWER_D0 ? "D0" : "D3"); 2274 } 2275 2276 static bool 2277 intel_dp_get_dpcd(struct intel_dp *intel_dp); 2278 2279 /** 2280 * intel_dp_sync_state - sync the encoder state during init/resume 2281 * @encoder: intel encoder to sync 2282 * @crtc_state: state for the CRTC connected to the encoder 2283 * 2284 * Sync any state stored in the encoder wrt. HW state during driver init 2285 * and system resume. 2286 */ 2287 void intel_dp_sync_state(struct intel_encoder *encoder, 2288 const struct intel_crtc_state *crtc_state) 2289 { 2290 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2291 2292 if (!crtc_state) 2293 return; 2294 2295 /* 2296 * Don't clobber DPCD if it's been already read out during output 2297 * setup (eDP) or detect. 2298 */ 2299 if (intel_dp->dpcd[DP_DPCD_REV] == 0) 2300 intel_dp_get_dpcd(intel_dp); 2301 2302 intel_dp_reset_max_link_params(intel_dp); 2303 } 2304 2305 bool intel_dp_initial_fastset_check(struct intel_encoder *encoder, 2306 struct intel_crtc_state *crtc_state) 2307 { 2308 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 2309 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2310 bool fastset = true; 2311 2312 /* 2313 * If BIOS has set an unsupported or non-standard link rate for some 2314 * reason force an encoder recompute and full modeset. 2315 */ 2316 if (intel_dp_rate_index(intel_dp->source_rates, intel_dp->num_source_rates, 2317 crtc_state->port_clock) < 0) { 2318 drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset due to unsupported link rate\n", 2319 encoder->base.base.id, encoder->base.name); 2320 crtc_state->uapi.connectors_changed = true; 2321 fastset = false; 2322 } 2323 2324 /* 2325 * FIXME hack to force full modeset when DSC is being used. 2326 * 2327 * As long as we do not have full state readout and config comparison 2328 * of crtc_state->dsc, we have no way to ensure reliable fastset. 2329 * Remove once we have readout for DSC. 2330 */ 2331 if (crtc_state->dsc.compression_enable) { 2332 drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset due to DSC being enabled\n", 2333 encoder->base.base.id, encoder->base.name); 2334 crtc_state->uapi.mode_changed = true; 2335 fastset = false; 2336 } 2337 2338 if (CAN_PSR(intel_dp)) { 2339 drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset to compute PSR state\n", 2340 encoder->base.base.id, encoder->base.name); 2341 crtc_state->uapi.mode_changed = true; 2342 fastset = false; 2343 } 2344 2345 return fastset; 2346 } 2347 2348 static void intel_dp_get_pcon_dsc_cap(struct intel_dp *intel_dp) 2349 { 2350 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2351 2352 /* Clear the cached register set to avoid using stale values */ 2353 2354 memset(intel_dp->pcon_dsc_dpcd, 0, sizeof(intel_dp->pcon_dsc_dpcd)); 2355 2356 if (drm_dp_dpcd_read(&intel_dp->aux, DP_PCON_DSC_ENCODER, 2357 intel_dp->pcon_dsc_dpcd, 2358 sizeof(intel_dp->pcon_dsc_dpcd)) < 0) 2359 drm_err(&i915->drm, "Failed to read DPCD register 0x%x\n", 2360 DP_PCON_DSC_ENCODER); 2361 2362 drm_dbg_kms(&i915->drm, "PCON ENCODER DSC DPCD: %*ph\n", 2363 (int)sizeof(intel_dp->pcon_dsc_dpcd), intel_dp->pcon_dsc_dpcd); 2364 } 2365 2366 static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) 2367 { 2368 int bw_gbps[] = {9, 18, 24, 32, 40, 48}; 2369 int i; 2370 2371 for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) { 2372 if (frl_bw_mask & (1 << i)) 2373 return bw_gbps[i]; 2374 } 2375 return 0; 2376 } 2377 2378 static int intel_dp_pcon_set_frl_mask(int max_frl) 2379 { 2380 switch (max_frl) { 2381 case 48: 2382 return DP_PCON_FRL_BW_MASK_48GBPS; 2383 case 40: 2384 return DP_PCON_FRL_BW_MASK_40GBPS; 2385 case 32: 2386 return DP_PCON_FRL_BW_MASK_32GBPS; 2387 case 24: 2388 return DP_PCON_FRL_BW_MASK_24GBPS; 2389 case 18: 2390 return DP_PCON_FRL_BW_MASK_18GBPS; 2391 case 9: 2392 return DP_PCON_FRL_BW_MASK_9GBPS; 2393 } 2394 2395 return 0; 2396 } 2397 2398 static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) 2399 { 2400 struct intel_connector *intel_connector = intel_dp->attached_connector; 2401 struct drm_connector *connector = &intel_connector->base; 2402 int max_frl_rate; 2403 int max_lanes, rate_per_lane; 2404 int max_dsc_lanes, dsc_rate_per_lane; 2405 2406 max_lanes = connector->display_info.hdmi.max_lanes; 2407 rate_per_lane = connector->display_info.hdmi.max_frl_rate_per_lane; 2408 max_frl_rate = max_lanes * rate_per_lane; 2409 2410 if (connector->display_info.hdmi.dsc_cap.v_1p2) { 2411 max_dsc_lanes = connector->display_info.hdmi.dsc_cap.max_lanes; 2412 dsc_rate_per_lane = connector->display_info.hdmi.dsc_cap.max_frl_rate_per_lane; 2413 if (max_dsc_lanes && dsc_rate_per_lane) 2414 max_frl_rate = min(max_frl_rate, max_dsc_lanes * dsc_rate_per_lane); 2415 } 2416 2417 return max_frl_rate; 2418 } 2419 2420 static bool 2421 intel_dp_pcon_is_frl_trained(struct intel_dp *intel_dp, 2422 u8 max_frl_bw_mask, u8 *frl_trained_mask) 2423 { 2424 if (drm_dp_pcon_hdmi_link_active(&intel_dp->aux) && 2425 drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, frl_trained_mask) == DP_PCON_HDMI_MODE_FRL && 2426 *frl_trained_mask >= max_frl_bw_mask) 2427 return true; 2428 2429 return false; 2430 } 2431 2432 static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) 2433 { 2434 #define TIMEOUT_FRL_READY_MS 500 2435 #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000 2436 2437 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2438 int max_frl_bw, max_pcon_frl_bw, max_edid_frl_bw, ret; 2439 u8 max_frl_bw_mask = 0, frl_trained_mask; 2440 bool is_active; 2441 2442 max_pcon_frl_bw = intel_dp->dfp.pcon_max_frl_bw; 2443 drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl_bw); 2444 2445 max_edid_frl_bw = intel_dp_hdmi_sink_max_frl(intel_dp); 2446 drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n", max_edid_frl_bw); 2447 2448 max_frl_bw = min(max_edid_frl_bw, max_pcon_frl_bw); 2449 2450 if (max_frl_bw <= 0) 2451 return -EINVAL; 2452 2453 max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw); 2454 drm_dbg(&i915->drm, "MAX_FRL_BW_MASK = %u\n", max_frl_bw_mask); 2455 2456 if (intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask)) 2457 goto frl_trained; 2458 2459 ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false); 2460 if (ret < 0) 2461 return ret; 2462 /* Wait for PCON to be FRL Ready */ 2463 wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true, TIMEOUT_FRL_READY_MS); 2464 2465 if (!is_active) 2466 return -ETIMEDOUT; 2467 2468 ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, 2469 DP_PCON_ENABLE_SEQUENTIAL_LINK); 2470 if (ret < 0) 2471 return ret; 2472 ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, 2473 DP_PCON_FRL_LINK_TRAIN_NORMAL); 2474 if (ret < 0) 2475 return ret; 2476 ret = drm_dp_pcon_frl_enable(&intel_dp->aux); 2477 if (ret < 0) 2478 return ret; 2479 /* 2480 * Wait for FRL to be completed 2481 * Check if the HDMI Link is up and active. 2482 */ 2483 wait_for(is_active = 2484 intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask), 2485 TIMEOUT_HDMI_LINK_ACTIVE_MS); 2486 2487 if (!is_active) 2488 return -ETIMEDOUT; 2489 2490 frl_trained: 2491 drm_dbg(&i915->drm, "FRL_TRAINED_MASK = %u\n", frl_trained_mask); 2492 intel_dp->frl.trained_rate_gbps = intel_dp_pcon_get_frl_mask(frl_trained_mask); 2493 intel_dp->frl.is_trained = true; 2494 drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n", intel_dp->frl.trained_rate_gbps); 2495 2496 return 0; 2497 } 2498 2499 static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) 2500 { 2501 if (drm_dp_is_branch(intel_dp->dpcd) && 2502 intel_dp->has_hdmi_sink && 2503 intel_dp_hdmi_sink_max_frl(intel_dp) > 0) 2504 return true; 2505 2506 return false; 2507 } 2508 2509 static 2510 int intel_dp_pcon_set_tmds_mode(struct intel_dp *intel_dp) 2511 { 2512 int ret; 2513 u8 buf = 0; 2514 2515 /* Set PCON source control mode */ 2516 buf |= DP_PCON_ENABLE_SOURCE_CTL_MODE; 2517 2518 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); 2519 if (ret < 0) 2520 return ret; 2521 2522 /* Set HDMI LINK ENABLE */ 2523 buf |= DP_PCON_ENABLE_HDMI_LINK; 2524 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); 2525 if (ret < 0) 2526 return ret; 2527 2528 return 0; 2529 } 2530 2531 void intel_dp_check_frl_training(struct intel_dp *intel_dp) 2532 { 2533 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 2534 2535 /* 2536 * Always go for FRL training if: 2537 * -PCON supports SRC_CTL_MODE (VESA DP2.0-HDMI2.1 PCON Spec Draft-1 Sec-7) 2538 * -sink is HDMI2.1 2539 */ 2540 if (!(intel_dp->downstream_ports[2] & DP_PCON_SOURCE_CTL_MODE) || 2541 !intel_dp_is_hdmi_2_1_sink(intel_dp) || 2542 intel_dp->frl.is_trained) 2543 return; 2544 2545 if (intel_dp_pcon_start_frl_training(intel_dp) < 0) { 2546 int ret, mode; 2547 2548 drm_dbg(&dev_priv->drm, "Couldn't set FRL mode, continuing with TMDS mode\n"); 2549 ret = intel_dp_pcon_set_tmds_mode(intel_dp); 2550 mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL); 2551 2552 if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS) 2553 drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n"); 2554 } else { 2555 drm_dbg(&dev_priv->drm, "FRL training Completed\n"); 2556 } 2557 } 2558 2559 static int 2560 intel_dp_pcon_dsc_enc_slice_height(const struct intel_crtc_state *crtc_state) 2561 { 2562 int vactive = crtc_state->hw.adjusted_mode.vdisplay; 2563 2564 return intel_hdmi_dsc_get_slice_height(vactive); 2565 } 2566 2567 static int 2568 intel_dp_pcon_dsc_enc_slices(struct intel_dp *intel_dp, 2569 const struct intel_crtc_state *crtc_state) 2570 { 2571 struct intel_connector *intel_connector = intel_dp->attached_connector; 2572 struct drm_connector *connector = &intel_connector->base; 2573 int hdmi_throughput = connector->display_info.hdmi.dsc_cap.clk_per_slice; 2574 int hdmi_max_slices = connector->display_info.hdmi.dsc_cap.max_slices; 2575 int pcon_max_slices = drm_dp_pcon_dsc_max_slices(intel_dp->pcon_dsc_dpcd); 2576 int pcon_max_slice_width = drm_dp_pcon_dsc_max_slice_width(intel_dp->pcon_dsc_dpcd); 2577 2578 return intel_hdmi_dsc_get_num_slices(crtc_state, pcon_max_slices, 2579 pcon_max_slice_width, 2580 hdmi_max_slices, hdmi_throughput); 2581 } 2582 2583 static int 2584 intel_dp_pcon_dsc_enc_bpp(struct intel_dp *intel_dp, 2585 const struct intel_crtc_state *crtc_state, 2586 int num_slices, int slice_width) 2587 { 2588 struct intel_connector *intel_connector = intel_dp->attached_connector; 2589 struct drm_connector *connector = &intel_connector->base; 2590 int output_format = crtc_state->output_format; 2591 bool hdmi_all_bpp = connector->display_info.hdmi.dsc_cap.all_bpp; 2592 int pcon_fractional_bpp = drm_dp_pcon_dsc_bpp_incr(intel_dp->pcon_dsc_dpcd); 2593 int hdmi_max_chunk_bytes = 2594 connector->display_info.hdmi.dsc_cap.total_chunk_kbytes * 1024; 2595 2596 return intel_hdmi_dsc_get_bpp(pcon_fractional_bpp, slice_width, 2597 num_slices, output_format, hdmi_all_bpp, 2598 hdmi_max_chunk_bytes); 2599 } 2600 2601 void 2602 intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp, 2603 const struct intel_crtc_state *crtc_state) 2604 { 2605 u8 pps_param[6]; 2606 int slice_height; 2607 int slice_width; 2608 int num_slices; 2609 int bits_per_pixel; 2610 int ret; 2611 struct intel_connector *intel_connector = intel_dp->attached_connector; 2612 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2613 struct drm_connector *connector; 2614 bool hdmi_is_dsc_1_2; 2615 2616 if (!intel_dp_is_hdmi_2_1_sink(intel_dp)) 2617 return; 2618 2619 if (!intel_connector) 2620 return; 2621 connector = &intel_connector->base; 2622 hdmi_is_dsc_1_2 = connector->display_info.hdmi.dsc_cap.v_1p2; 2623 2624 if (!drm_dp_pcon_enc_is_dsc_1_2(intel_dp->pcon_dsc_dpcd) || 2625 !hdmi_is_dsc_1_2) 2626 return; 2627 2628 slice_height = intel_dp_pcon_dsc_enc_slice_height(crtc_state); 2629 if (!slice_height) 2630 return; 2631 2632 num_slices = intel_dp_pcon_dsc_enc_slices(intel_dp, crtc_state); 2633 if (!num_slices) 2634 return; 2635 2636 slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, 2637 num_slices); 2638 2639 bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state, 2640 num_slices, slice_width); 2641 if (!bits_per_pixel) 2642 return; 2643 2644 pps_param[0] = slice_height & 0xFF; 2645 pps_param[1] = slice_height >> 8; 2646 pps_param[2] = slice_width & 0xFF; 2647 pps_param[3] = slice_width >> 8; 2648 pps_param[4] = bits_per_pixel & 0xFF; 2649 pps_param[5] = (bits_per_pixel >> 8) & 0x3; 2650 2651 ret = drm_dp_pcon_pps_override_param(&intel_dp->aux, pps_param); 2652 if (ret < 0) 2653 drm_dbg_kms(&i915->drm, "Failed to set pcon DSC\n"); 2654 } 2655 2656 void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, 2657 const struct intel_crtc_state *crtc_state) 2658 { 2659 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2660 u8 tmp; 2661 2662 if (intel_dp->dpcd[DP_DPCD_REV] < 0x13) 2663 return; 2664 2665 if (!drm_dp_is_branch(intel_dp->dpcd)) 2666 return; 2667 2668 tmp = intel_dp->has_hdmi_sink ? 2669 DP_HDMI_DVI_OUTPUT_CONFIG : 0; 2670 2671 if (drm_dp_dpcd_writeb(&intel_dp->aux, 2672 DP_PROTOCOL_CONVERTER_CONTROL_0, tmp) != 1) 2673 drm_dbg_kms(&i915->drm, "Failed to %s protocol converter HDMI mode\n", 2674 str_enable_disable(intel_dp->has_hdmi_sink)); 2675 2676 tmp = crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 && 2677 intel_dp->dfp.ycbcr_444_to_420 ? DP_CONVERSION_TO_YCBCR420_ENABLE : 0; 2678 2679 if (drm_dp_dpcd_writeb(&intel_dp->aux, 2680 DP_PROTOCOL_CONVERTER_CONTROL_1, tmp) != 1) 2681 drm_dbg_kms(&i915->drm, 2682 "Failed to %s protocol converter YCbCr 4:2:0 conversion mode\n", 2683 str_enable_disable(intel_dp->dfp.ycbcr_444_to_420)); 2684 2685 tmp = intel_dp->dfp.rgb_to_ycbcr ? 2686 DP_CONVERSION_BT709_RGB_YCBCR_ENABLE : 0; 2687 2688 if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) < 0) 2689 drm_dbg_kms(&i915->drm, 2690 "Failed to %s protocol converter RGB->YCbCr conversion mode\n", 2691 str_enable_disable(tmp)); 2692 } 2693 2694 bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp) 2695 { 2696 u8 dprx = 0; 2697 2698 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_DPRX_FEATURE_ENUMERATION_LIST, 2699 &dprx) != 1) 2700 return false; 2701 return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED; 2702 } 2703 2704 static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp) 2705 { 2706 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2707 2708 /* 2709 * Clear the cached register set to avoid using stale values 2710 * for the sinks that do not support DSC. 2711 */ 2712 memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd)); 2713 2714 /* Clear fec_capable to avoid using stale values */ 2715 intel_dp->fec_capable = 0; 2716 2717 /* Cache the DSC DPCD if eDP or DP rev >= 1.4 */ 2718 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x14 || 2719 intel_dp->edp_dpcd[0] >= DP_EDP_14) { 2720 if (drm_dp_dpcd_read(&intel_dp->aux, DP_DSC_SUPPORT, 2721 intel_dp->dsc_dpcd, 2722 sizeof(intel_dp->dsc_dpcd)) < 0) 2723 drm_err(&i915->drm, 2724 "Failed to read DPCD register 0x%x\n", 2725 DP_DSC_SUPPORT); 2726 2727 drm_dbg_kms(&i915->drm, "DSC DPCD: %*ph\n", 2728 (int)sizeof(intel_dp->dsc_dpcd), 2729 intel_dp->dsc_dpcd); 2730 2731 /* FEC is supported only on DP 1.4 */ 2732 if (!intel_dp_is_edp(intel_dp) && 2733 drm_dp_dpcd_readb(&intel_dp->aux, DP_FEC_CAPABILITY, 2734 &intel_dp->fec_capable) < 0) 2735 drm_err(&i915->drm, 2736 "Failed to read FEC DPCD register\n"); 2737 2738 drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n", 2739 intel_dp->fec_capable); 2740 } 2741 } 2742 2743 static void intel_edp_mso_mode_fixup(struct intel_connector *connector, 2744 struct drm_display_mode *mode) 2745 { 2746 struct intel_dp *intel_dp = intel_attached_dp(connector); 2747 struct drm_i915_private *i915 = to_i915(connector->base.dev); 2748 int n = intel_dp->mso_link_count; 2749 int overlap = intel_dp->mso_pixel_overlap; 2750 2751 if (!mode || !n) 2752 return; 2753 2754 mode->hdisplay = (mode->hdisplay - overlap) * n; 2755 mode->hsync_start = (mode->hsync_start - overlap) * n; 2756 mode->hsync_end = (mode->hsync_end - overlap) * n; 2757 mode->htotal = (mode->htotal - overlap) * n; 2758 mode->clock *= n; 2759 2760 drm_mode_set_name(mode); 2761 2762 drm_dbg_kms(&i915->drm, 2763 "[CONNECTOR:%d:%s] using generated MSO mode: " DRM_MODE_FMT "\n", 2764 connector->base.base.id, connector->base.name, 2765 DRM_MODE_ARG(mode)); 2766 } 2767 2768 void intel_edp_fixup_vbt_bpp(struct intel_encoder *encoder, int pipe_bpp) 2769 { 2770 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 2771 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2772 struct intel_connector *connector = intel_dp->attached_connector; 2773 2774 if (connector->panel.vbt.edp.bpp && pipe_bpp > connector->panel.vbt.edp.bpp) { 2775 /* 2776 * This is a big fat ugly hack. 2777 * 2778 * Some machines in UEFI boot mode provide us a VBT that has 18 2779 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons 2780 * unknown we fail to light up. Yet the same BIOS boots up with 2781 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as 2782 * max, not what it tells us to use. 2783 * 2784 * Note: This will still be broken if the eDP panel is not lit 2785 * up by the BIOS, and thus we can't get the mode at module 2786 * load. 2787 */ 2788 drm_dbg_kms(&dev_priv->drm, 2789 "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", 2790 pipe_bpp, connector->panel.vbt.edp.bpp); 2791 connector->panel.vbt.edp.bpp = pipe_bpp; 2792 } 2793 } 2794 2795 static void intel_edp_mso_init(struct intel_dp *intel_dp) 2796 { 2797 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2798 struct intel_connector *connector = intel_dp->attached_connector; 2799 struct drm_display_info *info = &connector->base.display_info; 2800 u8 mso; 2801 2802 if (intel_dp->edp_dpcd[0] < DP_EDP_14) 2803 return; 2804 2805 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_MSO_LINK_CAPABILITIES, &mso) != 1) { 2806 drm_err(&i915->drm, "Failed to read MSO cap\n"); 2807 return; 2808 } 2809 2810 /* Valid configurations are SST or MSO 2x1, 2x2, 4x1 */ 2811 mso &= DP_EDP_MSO_NUMBER_OF_LINKS_MASK; 2812 if (mso % 2 || mso > drm_dp_max_lane_count(intel_dp->dpcd)) { 2813 drm_err(&i915->drm, "Invalid MSO link count cap %u\n", mso); 2814 mso = 0; 2815 } 2816 2817 if (mso) { 2818 drm_dbg_kms(&i915->drm, "Sink MSO %ux%u configuration, pixel overlap %u\n", 2819 mso, drm_dp_max_lane_count(intel_dp->dpcd) / mso, 2820 info->mso_pixel_overlap); 2821 if (!HAS_MSO(i915)) { 2822 drm_err(&i915->drm, "No source MSO support, disabling\n"); 2823 mso = 0; 2824 } 2825 } 2826 2827 intel_dp->mso_link_count = mso; 2828 intel_dp->mso_pixel_overlap = mso ? info->mso_pixel_overlap : 0; 2829 } 2830 2831 static bool 2832 intel_edp_init_dpcd(struct intel_dp *intel_dp) 2833 { 2834 struct drm_i915_private *dev_priv = 2835 to_i915(dp_to_dig_port(intel_dp)->base.base.dev); 2836 2837 /* this function is meant to be called only once */ 2838 drm_WARN_ON(&dev_priv->drm, intel_dp->dpcd[DP_DPCD_REV] != 0); 2839 2840 if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd) != 0) 2841 return false; 2842 2843 drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, 2844 drm_dp_is_branch(intel_dp->dpcd)); 2845 2846 /* 2847 * Read the eDP display control registers. 2848 * 2849 * Do this independent of DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in 2850 * DP_EDP_CONFIGURATION_CAP, because some buggy displays do not have it 2851 * set, but require eDP 1.4+ detection (e.g. for supported link rates 2852 * method). The display control registers should read zero if they're 2853 * not supported anyway. 2854 */ 2855 if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, 2856 intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == 2857 sizeof(intel_dp->edp_dpcd)) { 2858 drm_dbg_kms(&dev_priv->drm, "eDP DPCD: %*ph\n", 2859 (int)sizeof(intel_dp->edp_dpcd), 2860 intel_dp->edp_dpcd); 2861 2862 intel_dp->use_max_params = intel_dp->edp_dpcd[0] < DP_EDP_14; 2863 } 2864 2865 /* 2866 * This has to be called after intel_dp->edp_dpcd is filled, PSR checks 2867 * for SET_POWER_CAPABLE bit in intel_dp->edp_dpcd[1] 2868 */ 2869 intel_psr_init_dpcd(intel_dp); 2870 2871 /* Clear the default sink rates */ 2872 intel_dp->num_sink_rates = 0; 2873 2874 /* Read the eDP 1.4+ supported link rates. */ 2875 if (intel_dp->edp_dpcd[0] >= DP_EDP_14) { 2876 __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; 2877 int i; 2878 2879 drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES, 2880 sink_rates, sizeof(sink_rates)); 2881 2882 for (i = 0; i < ARRAY_SIZE(sink_rates); i++) { 2883 int val = le16_to_cpu(sink_rates[i]); 2884 2885 if (val == 0) 2886 break; 2887 2888 /* Value read multiplied by 200kHz gives the per-lane 2889 * link rate in kHz. The source rates are, however, 2890 * stored in terms of LS_Clk kHz. The full conversion 2891 * back to symbols is 2892 * (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte) 2893 */ 2894 intel_dp->sink_rates[i] = (val * 200) / 10; 2895 } 2896 intel_dp->num_sink_rates = i; 2897 } 2898 2899 /* 2900 * Use DP_LINK_RATE_SET if DP_SUPPORTED_LINK_RATES are available, 2901 * default to DP_MAX_LINK_RATE and DP_LINK_BW_SET otherwise. 2902 */ 2903 if (intel_dp->num_sink_rates) 2904 intel_dp->use_rate_select = true; 2905 else 2906 intel_dp_set_sink_rates(intel_dp); 2907 intel_dp_set_max_sink_lane_count(intel_dp); 2908 2909 /* Read the eDP DSC DPCD registers */ 2910 if (DISPLAY_VER(dev_priv) >= 10) 2911 intel_dp_get_dsc_sink_cap(intel_dp); 2912 2913 /* 2914 * If needed, program our source OUI so we can make various Intel-specific AUX services 2915 * available (such as HDR backlight controls) 2916 */ 2917 intel_edp_init_source_oui(intel_dp, true); 2918 2919 return true; 2920 } 2921 2922 static bool 2923 intel_dp_has_sink_count(struct intel_dp *intel_dp) 2924 { 2925 if (!intel_dp->attached_connector) 2926 return false; 2927 2928 return drm_dp_read_sink_count_cap(&intel_dp->attached_connector->base, 2929 intel_dp->dpcd, 2930 &intel_dp->desc); 2931 } 2932 2933 static bool 2934 intel_dp_get_dpcd(struct intel_dp *intel_dp) 2935 { 2936 int ret; 2937 2938 if (intel_dp_init_lttpr_and_dprx_caps(intel_dp) < 0) 2939 return false; 2940 2941 /* 2942 * Don't clobber cached eDP rates. Also skip re-reading 2943 * the OUI/ID since we know it won't change. 2944 */ 2945 if (!intel_dp_is_edp(intel_dp)) { 2946 drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, 2947 drm_dp_is_branch(intel_dp->dpcd)); 2948 2949 intel_dp_set_sink_rates(intel_dp); 2950 intel_dp_set_max_sink_lane_count(intel_dp); 2951 intel_dp_set_common_rates(intel_dp); 2952 } 2953 2954 if (intel_dp_has_sink_count(intel_dp)) { 2955 ret = drm_dp_read_sink_count(&intel_dp->aux); 2956 if (ret < 0) 2957 return false; 2958 2959 /* 2960 * Sink count can change between short pulse hpd hence 2961 * a member variable in intel_dp will track any changes 2962 * between short pulse interrupts. 2963 */ 2964 intel_dp->sink_count = ret; 2965 2966 /* 2967 * SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that 2968 * a dongle is present but no display. Unless we require to know 2969 * if a dongle is present or not, we don't need to update 2970 * downstream port information. So, an early return here saves 2971 * time from performing other operations which are not required. 2972 */ 2973 if (!intel_dp->sink_count) 2974 return false; 2975 } 2976 2977 return drm_dp_read_downstream_info(&intel_dp->aux, intel_dp->dpcd, 2978 intel_dp->downstream_ports) == 0; 2979 } 2980 2981 static bool 2982 intel_dp_can_mst(struct intel_dp *intel_dp) 2983 { 2984 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2985 2986 return i915->params.enable_dp_mst && 2987 intel_dp_mst_source_support(intel_dp) && 2988 drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd); 2989 } 2990 2991 static void 2992 intel_dp_configure_mst(struct intel_dp *intel_dp) 2993 { 2994 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2995 struct intel_encoder *encoder = 2996 &dp_to_dig_port(intel_dp)->base; 2997 bool sink_can_mst = drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd); 2998 2999 drm_dbg_kms(&i915->drm, 3000 "[ENCODER:%d:%s] MST support: port: %s, sink: %s, modparam: %s\n", 3001 encoder->base.base.id, encoder->base.name, 3002 str_yes_no(intel_dp_mst_source_support(intel_dp)), 3003 str_yes_no(sink_can_mst), 3004 str_yes_no(i915->params.enable_dp_mst)); 3005 3006 if (!intel_dp_mst_source_support(intel_dp)) 3007 return; 3008 3009 intel_dp->is_mst = sink_can_mst && 3010 i915->params.enable_dp_mst; 3011 3012 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, 3013 intel_dp->is_mst); 3014 } 3015 3016 static bool 3017 intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *esi) 3018 { 3019 return drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT_ESI, esi, 4) == 4; 3020 } 3021 3022 static bool intel_dp_ack_sink_irq_esi(struct intel_dp *intel_dp, u8 esi[4]) 3023 { 3024 int retry; 3025 3026 for (retry = 0; retry < 3; retry++) { 3027 if (drm_dp_dpcd_write(&intel_dp->aux, DP_SINK_COUNT_ESI + 1, 3028 &esi[1], 3) == 3) 3029 return true; 3030 } 3031 3032 return false; 3033 } 3034 3035 bool 3036 intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state, 3037 const struct drm_connector_state *conn_state) 3038 { 3039 /* 3040 * As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication 3041 * of Color Encoding Format and Content Color Gamut], in order to 3042 * sending YCBCR 420 or HDR BT.2020 signals we should use DP VSC SDP. 3043 */ 3044 if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) 3045 return true; 3046 3047 switch (conn_state->colorspace) { 3048 case DRM_MODE_COLORIMETRY_SYCC_601: 3049 case DRM_MODE_COLORIMETRY_OPYCC_601: 3050 case DRM_MODE_COLORIMETRY_BT2020_YCC: 3051 case DRM_MODE_COLORIMETRY_BT2020_RGB: 3052 case DRM_MODE_COLORIMETRY_BT2020_CYCC: 3053 return true; 3054 default: 3055 break; 3056 } 3057 3058 return false; 3059 } 3060 3061 static ssize_t intel_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc, 3062 struct dp_sdp *sdp, size_t size) 3063 { 3064 size_t length = sizeof(struct dp_sdp); 3065 3066 if (size < length) 3067 return -ENOSPC; 3068 3069 memset(sdp, 0, size); 3070 3071 /* 3072 * Prepare VSC Header for SU as per DP 1.4a spec, Table 2-119 3073 * VSC SDP Header Bytes 3074 */ 3075 sdp->sdp_header.HB0 = 0; /* Secondary-Data Packet ID = 0 */ 3076 sdp->sdp_header.HB1 = vsc->sdp_type; /* Secondary-data Packet Type */ 3077 sdp->sdp_header.HB2 = vsc->revision; /* Revision Number */ 3078 sdp->sdp_header.HB3 = vsc->length; /* Number of Valid Data Bytes */ 3079 3080 /* 3081 * Only revision 0x5 supports Pixel Encoding/Colorimetry Format as 3082 * per DP 1.4a spec. 3083 */ 3084 if (vsc->revision != 0x5) 3085 goto out; 3086 3087 /* VSC SDP Payload for DB16 through DB18 */ 3088 /* Pixel Encoding and Colorimetry Formats */ 3089 sdp->db[16] = (vsc->pixelformat & 0xf) << 4; /* DB16[7:4] */ 3090 sdp->db[16] |= vsc->colorimetry & 0xf; /* DB16[3:0] */ 3091 3092 switch (vsc->bpc) { 3093 case 6: 3094 /* 6bpc: 0x0 */ 3095 break; 3096 case 8: 3097 sdp->db[17] = 0x1; /* DB17[3:0] */ 3098 break; 3099 case 10: 3100 sdp->db[17] = 0x2; 3101 break; 3102 case 12: 3103 sdp->db[17] = 0x3; 3104 break; 3105 case 16: 3106 sdp->db[17] = 0x4; 3107 break; 3108 default: 3109 MISSING_CASE(vsc->bpc); 3110 break; 3111 } 3112 /* Dynamic Range and Component Bit Depth */ 3113 if (vsc->dynamic_range == DP_DYNAMIC_RANGE_CTA) 3114 sdp->db[17] |= 0x80; /* DB17[7] */ 3115 3116 /* Content Type */ 3117 sdp->db[18] = vsc->content_type & 0x7; 3118 3119 out: 3120 return length; 3121 } 3122 3123 static ssize_t 3124 intel_dp_hdr_metadata_infoframe_sdp_pack(struct drm_i915_private *i915, 3125 const struct hdmi_drm_infoframe *drm_infoframe, 3126 struct dp_sdp *sdp, 3127 size_t size) 3128 { 3129 size_t length = sizeof(struct dp_sdp); 3130 const int infoframe_size = HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE; 3131 unsigned char buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE]; 3132 ssize_t len; 3133 3134 if (size < length) 3135 return -ENOSPC; 3136 3137 memset(sdp, 0, size); 3138 3139 len = hdmi_drm_infoframe_pack_only(drm_infoframe, buf, sizeof(buf)); 3140 if (len < 0) { 3141 drm_dbg_kms(&i915->drm, "buffer size is smaller than hdr metadata infoframe\n"); 3142 return -ENOSPC; 3143 } 3144 3145 if (len != infoframe_size) { 3146 drm_dbg_kms(&i915->drm, "wrong static hdr metadata size\n"); 3147 return -ENOSPC; 3148 } 3149 3150 /* 3151 * Set up the infoframe sdp packet for HDR static metadata. 3152 * Prepare VSC Header for SU as per DP 1.4a spec, 3153 * Table 2-100 and Table 2-101 3154 */ 3155 3156 /* Secondary-Data Packet ID, 00h for non-Audio INFOFRAME */ 3157 sdp->sdp_header.HB0 = 0; 3158 /* 3159 * Packet Type 80h + Non-audio INFOFRAME Type value 3160 * HDMI_INFOFRAME_TYPE_DRM: 0x87 3161 * - 80h + Non-audio INFOFRAME Type value 3162 * - InfoFrame Type: 0x07 3163 * [CTA-861-G Table-42 Dynamic Range and Mastering InfoFrame] 3164 */ 3165 sdp->sdp_header.HB1 = drm_infoframe->type; 3166 /* 3167 * Least Significant Eight Bits of (Data Byte Count – 1) 3168 * infoframe_size - 1 3169 */ 3170 sdp->sdp_header.HB2 = 0x1D; 3171 /* INFOFRAME SDP Version Number */ 3172 sdp->sdp_header.HB3 = (0x13 << 2); 3173 /* CTA Header Byte 2 (INFOFRAME Version Number) */ 3174 sdp->db[0] = drm_infoframe->version; 3175 /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ 3176 sdp->db[1] = drm_infoframe->length; 3177 /* 3178 * Copy HDMI_DRM_INFOFRAME_SIZE size from a buffer after 3179 * HDMI_INFOFRAME_HEADER_SIZE 3180 */ 3181 BUILD_BUG_ON(sizeof(sdp->db) < HDMI_DRM_INFOFRAME_SIZE + 2); 3182 memcpy(&sdp->db[2], &buf[HDMI_INFOFRAME_HEADER_SIZE], 3183 HDMI_DRM_INFOFRAME_SIZE); 3184 3185 /* 3186 * Size of DP infoframe sdp packet for HDR static metadata consists of 3187 * - DP SDP Header(struct dp_sdp_header): 4 bytes 3188 * - Two Data Blocks: 2 bytes 3189 * CTA Header Byte2 (INFOFRAME Version Number) 3190 * CTA Header Byte3 (Length of INFOFRAME) 3191 * - HDMI_DRM_INFOFRAME_SIZE: 26 bytes 3192 * 3193 * Prior to GEN11's GMP register size is identical to DP HDR static metadata 3194 * infoframe size. But GEN11+ has larger than that size, write_infoframe 3195 * will pad rest of the size. 3196 */ 3197 return sizeof(struct dp_sdp_header) + 2 + HDMI_DRM_INFOFRAME_SIZE; 3198 } 3199 3200 static void intel_write_dp_sdp(struct intel_encoder *encoder, 3201 const struct intel_crtc_state *crtc_state, 3202 unsigned int type) 3203 { 3204 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3205 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3206 struct dp_sdp sdp = {}; 3207 ssize_t len; 3208 3209 if ((crtc_state->infoframes.enable & 3210 intel_hdmi_infoframe_enable(type)) == 0) 3211 return; 3212 3213 switch (type) { 3214 case DP_SDP_VSC: 3215 len = intel_dp_vsc_sdp_pack(&crtc_state->infoframes.vsc, &sdp, 3216 sizeof(sdp)); 3217 break; 3218 case HDMI_PACKET_TYPE_GAMUT_METADATA: 3219 len = intel_dp_hdr_metadata_infoframe_sdp_pack(dev_priv, 3220 &crtc_state->infoframes.drm.drm, 3221 &sdp, sizeof(sdp)); 3222 break; 3223 default: 3224 MISSING_CASE(type); 3225 return; 3226 } 3227 3228 if (drm_WARN_ON(&dev_priv->drm, len < 0)) 3229 return; 3230 3231 dig_port->write_infoframe(encoder, crtc_state, type, &sdp, len); 3232 } 3233 3234 void intel_write_dp_vsc_sdp(struct intel_encoder *encoder, 3235 const struct intel_crtc_state *crtc_state, 3236 const struct drm_dp_vsc_sdp *vsc) 3237 { 3238 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3239 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3240 struct dp_sdp sdp = {}; 3241 ssize_t len; 3242 3243 len = intel_dp_vsc_sdp_pack(vsc, &sdp, sizeof(sdp)); 3244 3245 if (drm_WARN_ON(&dev_priv->drm, len < 0)) 3246 return; 3247 3248 dig_port->write_infoframe(encoder, crtc_state, DP_SDP_VSC, 3249 &sdp, len); 3250 } 3251 3252 void intel_dp_set_infoframes(struct intel_encoder *encoder, 3253 bool enable, 3254 const struct intel_crtc_state *crtc_state, 3255 const struct drm_connector_state *conn_state) 3256 { 3257 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3258 i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder); 3259 u32 dip_enable = VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_GCP_HSW | 3260 VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW | 3261 VIDEO_DIP_ENABLE_SPD_HSW | VIDEO_DIP_ENABLE_DRM_GLK; 3262 u32 val = intel_de_read(dev_priv, reg) & ~dip_enable; 3263 3264 /* TODO: Add DSC case (DIP_ENABLE_PPS) */ 3265 /* When PSR is enabled, this routine doesn't disable VSC DIP */ 3266 if (!crtc_state->has_psr) 3267 val &= ~VIDEO_DIP_ENABLE_VSC_HSW; 3268 3269 intel_de_write(dev_priv, reg, val); 3270 intel_de_posting_read(dev_priv, reg); 3271 3272 if (!enable) 3273 return; 3274 3275 /* When PSR is enabled, VSC SDP is handled by PSR routine */ 3276 if (!crtc_state->has_psr) 3277 intel_write_dp_sdp(encoder, crtc_state, DP_SDP_VSC); 3278 3279 intel_write_dp_sdp(encoder, crtc_state, HDMI_PACKET_TYPE_GAMUT_METADATA); 3280 } 3281 3282 static int intel_dp_vsc_sdp_unpack(struct drm_dp_vsc_sdp *vsc, 3283 const void *buffer, size_t size) 3284 { 3285 const struct dp_sdp *sdp = buffer; 3286 3287 if (size < sizeof(struct dp_sdp)) 3288 return -EINVAL; 3289 3290 memset(vsc, 0, sizeof(*vsc)); 3291 3292 if (sdp->sdp_header.HB0 != 0) 3293 return -EINVAL; 3294 3295 if (sdp->sdp_header.HB1 != DP_SDP_VSC) 3296 return -EINVAL; 3297 3298 vsc->sdp_type = sdp->sdp_header.HB1; 3299 vsc->revision = sdp->sdp_header.HB2; 3300 vsc->length = sdp->sdp_header.HB3; 3301 3302 if ((sdp->sdp_header.HB2 == 0x2 && sdp->sdp_header.HB3 == 0x8) || 3303 (sdp->sdp_header.HB2 == 0x4 && sdp->sdp_header.HB3 == 0xe)) { 3304 /* 3305 * - HB2 = 0x2, HB3 = 0x8 3306 * VSC SDP supporting 3D stereo + PSR 3307 * - HB2 = 0x4, HB3 = 0xe 3308 * VSC SDP supporting 3D stereo + PSR2 with Y-coordinate of 3309 * first scan line of the SU region (applies to eDP v1.4b 3310 * and higher). 3311 */ 3312 return 0; 3313 } else if (sdp->sdp_header.HB2 == 0x5 && sdp->sdp_header.HB3 == 0x13) { 3314 /* 3315 * - HB2 = 0x5, HB3 = 0x13 3316 * VSC SDP supporting 3D stereo + PSR2 + Pixel Encoding/Colorimetry 3317 * Format. 3318 */ 3319 vsc->pixelformat = (sdp->db[16] >> 4) & 0xf; 3320 vsc->colorimetry = sdp->db[16] & 0xf; 3321 vsc->dynamic_range = (sdp->db[17] >> 7) & 0x1; 3322 3323 switch (sdp->db[17] & 0x7) { 3324 case 0x0: 3325 vsc->bpc = 6; 3326 break; 3327 case 0x1: 3328 vsc->bpc = 8; 3329 break; 3330 case 0x2: 3331 vsc->bpc = 10; 3332 break; 3333 case 0x3: 3334 vsc->bpc = 12; 3335 break; 3336 case 0x4: 3337 vsc->bpc = 16; 3338 break; 3339 default: 3340 MISSING_CASE(sdp->db[17] & 0x7); 3341 return -EINVAL; 3342 } 3343 3344 vsc->content_type = sdp->db[18] & 0x7; 3345 } else { 3346 return -EINVAL; 3347 } 3348 3349 return 0; 3350 } 3351 3352 static int 3353 intel_dp_hdr_metadata_infoframe_sdp_unpack(struct hdmi_drm_infoframe *drm_infoframe, 3354 const void *buffer, size_t size) 3355 { 3356 int ret; 3357 3358 const struct dp_sdp *sdp = buffer; 3359 3360 if (size < sizeof(struct dp_sdp)) 3361 return -EINVAL; 3362 3363 if (sdp->sdp_header.HB0 != 0) 3364 return -EINVAL; 3365 3366 if (sdp->sdp_header.HB1 != HDMI_INFOFRAME_TYPE_DRM) 3367 return -EINVAL; 3368 3369 /* 3370 * Least Significant Eight Bits of (Data Byte Count – 1) 3371 * 1Dh (i.e., Data Byte Count = 30 bytes). 3372 */ 3373 if (sdp->sdp_header.HB2 != 0x1D) 3374 return -EINVAL; 3375 3376 /* Most Significant Two Bits of (Data Byte Count – 1), Clear to 00b. */ 3377 if ((sdp->sdp_header.HB3 & 0x3) != 0) 3378 return -EINVAL; 3379 3380 /* INFOFRAME SDP Version Number */ 3381 if (((sdp->sdp_header.HB3 >> 2) & 0x3f) != 0x13) 3382 return -EINVAL; 3383 3384 /* CTA Header Byte 2 (INFOFRAME Version Number) */ 3385 if (sdp->db[0] != 1) 3386 return -EINVAL; 3387 3388 /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ 3389 if (sdp->db[1] != HDMI_DRM_INFOFRAME_SIZE) 3390 return -EINVAL; 3391 3392 ret = hdmi_drm_infoframe_unpack_only(drm_infoframe, &sdp->db[2], 3393 HDMI_DRM_INFOFRAME_SIZE); 3394 3395 return ret; 3396 } 3397 3398 static void intel_read_dp_vsc_sdp(struct intel_encoder *encoder, 3399 struct intel_crtc_state *crtc_state, 3400 struct drm_dp_vsc_sdp *vsc) 3401 { 3402 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3403 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3404 unsigned int type = DP_SDP_VSC; 3405 struct dp_sdp sdp = {}; 3406 int ret; 3407 3408 /* When PSR is enabled, VSC SDP is handled by PSR routine */ 3409 if (crtc_state->has_psr) 3410 return; 3411 3412 if ((crtc_state->infoframes.enable & 3413 intel_hdmi_infoframe_enable(type)) == 0) 3414 return; 3415 3416 dig_port->read_infoframe(encoder, crtc_state, type, &sdp, sizeof(sdp)); 3417 3418 ret = intel_dp_vsc_sdp_unpack(vsc, &sdp, sizeof(sdp)); 3419 3420 if (ret) 3421 drm_dbg_kms(&dev_priv->drm, "Failed to unpack DP VSC SDP\n"); 3422 } 3423 3424 static void intel_read_dp_hdr_metadata_infoframe_sdp(struct intel_encoder *encoder, 3425 struct intel_crtc_state *crtc_state, 3426 struct hdmi_drm_infoframe *drm_infoframe) 3427 { 3428 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3429 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3430 unsigned int type = HDMI_PACKET_TYPE_GAMUT_METADATA; 3431 struct dp_sdp sdp = {}; 3432 int ret; 3433 3434 if ((crtc_state->infoframes.enable & 3435 intel_hdmi_infoframe_enable(type)) == 0) 3436 return; 3437 3438 dig_port->read_infoframe(encoder, crtc_state, type, &sdp, 3439 sizeof(sdp)); 3440 3441 ret = intel_dp_hdr_metadata_infoframe_sdp_unpack(drm_infoframe, &sdp, 3442 sizeof(sdp)); 3443 3444 if (ret) 3445 drm_dbg_kms(&dev_priv->drm, 3446 "Failed to unpack DP HDR Metadata Infoframe SDP\n"); 3447 } 3448 3449 void intel_read_dp_sdp(struct intel_encoder *encoder, 3450 struct intel_crtc_state *crtc_state, 3451 unsigned int type) 3452 { 3453 switch (type) { 3454 case DP_SDP_VSC: 3455 intel_read_dp_vsc_sdp(encoder, crtc_state, 3456 &crtc_state->infoframes.vsc); 3457 break; 3458 case HDMI_PACKET_TYPE_GAMUT_METADATA: 3459 intel_read_dp_hdr_metadata_infoframe_sdp(encoder, crtc_state, 3460 &crtc_state->infoframes.drm.drm); 3461 break; 3462 default: 3463 MISSING_CASE(type); 3464 break; 3465 } 3466 } 3467 3468 static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp) 3469 { 3470 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3471 int status = 0; 3472 int test_link_rate; 3473 u8 test_lane_count, test_link_bw; 3474 /* (DP CTS 1.2) 3475 * 4.3.1.11 3476 */ 3477 /* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */ 3478 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT, 3479 &test_lane_count); 3480 3481 if (status <= 0) { 3482 drm_dbg_kms(&i915->drm, "Lane count read failed\n"); 3483 return DP_TEST_NAK; 3484 } 3485 test_lane_count &= DP_MAX_LANE_COUNT_MASK; 3486 3487 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE, 3488 &test_link_bw); 3489 if (status <= 0) { 3490 drm_dbg_kms(&i915->drm, "Link Rate read failed\n"); 3491 return DP_TEST_NAK; 3492 } 3493 test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw); 3494 3495 /* Validate the requested link rate and lane count */ 3496 if (!intel_dp_link_params_valid(intel_dp, test_link_rate, 3497 test_lane_count)) 3498 return DP_TEST_NAK; 3499 3500 intel_dp->compliance.test_lane_count = test_lane_count; 3501 intel_dp->compliance.test_link_rate = test_link_rate; 3502 3503 return DP_TEST_ACK; 3504 } 3505 3506 static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp) 3507 { 3508 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3509 u8 test_pattern; 3510 u8 test_misc; 3511 __be16 h_width, v_height; 3512 int status = 0; 3513 3514 /* Read the TEST_PATTERN (DP CTS 3.1.5) */ 3515 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN, 3516 &test_pattern); 3517 if (status <= 0) { 3518 drm_dbg_kms(&i915->drm, "Test pattern read failed\n"); 3519 return DP_TEST_NAK; 3520 } 3521 if (test_pattern != DP_COLOR_RAMP) 3522 return DP_TEST_NAK; 3523 3524 status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI, 3525 &h_width, 2); 3526 if (status <= 0) { 3527 drm_dbg_kms(&i915->drm, "H Width read failed\n"); 3528 return DP_TEST_NAK; 3529 } 3530 3531 status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI, 3532 &v_height, 2); 3533 if (status <= 0) { 3534 drm_dbg_kms(&i915->drm, "V Height read failed\n"); 3535 return DP_TEST_NAK; 3536 } 3537 3538 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0, 3539 &test_misc); 3540 if (status <= 0) { 3541 drm_dbg_kms(&i915->drm, "TEST MISC read failed\n"); 3542 return DP_TEST_NAK; 3543 } 3544 if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB) 3545 return DP_TEST_NAK; 3546 if (test_misc & DP_TEST_DYNAMIC_RANGE_CEA) 3547 return DP_TEST_NAK; 3548 switch (test_misc & DP_TEST_BIT_DEPTH_MASK) { 3549 case DP_TEST_BIT_DEPTH_6: 3550 intel_dp->compliance.test_data.bpc = 6; 3551 break; 3552 case DP_TEST_BIT_DEPTH_8: 3553 intel_dp->compliance.test_data.bpc = 8; 3554 break; 3555 default: 3556 return DP_TEST_NAK; 3557 } 3558 3559 intel_dp->compliance.test_data.video_pattern = test_pattern; 3560 intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width); 3561 intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height); 3562 /* Set test active flag here so userspace doesn't interrupt things */ 3563 intel_dp->compliance.test_active = true; 3564 3565 return DP_TEST_ACK; 3566 } 3567 3568 static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp) 3569 { 3570 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3571 u8 test_result = DP_TEST_ACK; 3572 struct intel_connector *intel_connector = intel_dp->attached_connector; 3573 struct drm_connector *connector = &intel_connector->base; 3574 3575 if (intel_connector->detect_edid == NULL || 3576 connector->edid_corrupt || 3577 intel_dp->aux.i2c_defer_count > 6) { 3578 /* Check EDID read for NACKs, DEFERs and corruption 3579 * (DP CTS 1.2 Core r1.1) 3580 * 4.2.2.4 : Failed EDID read, I2C_NAK 3581 * 4.2.2.5 : Failed EDID read, I2C_DEFER 3582 * 4.2.2.6 : EDID corruption detected 3583 * Use failsafe mode for all cases 3584 */ 3585 if (intel_dp->aux.i2c_nack_count > 0 || 3586 intel_dp->aux.i2c_defer_count > 0) 3587 drm_dbg_kms(&i915->drm, 3588 "EDID read had %d NACKs, %d DEFERs\n", 3589 intel_dp->aux.i2c_nack_count, 3590 intel_dp->aux.i2c_defer_count); 3591 intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE; 3592 } else { 3593 struct edid *block = intel_connector->detect_edid; 3594 3595 /* We have to write the checksum 3596 * of the last block read 3597 */ 3598 block += intel_connector->detect_edid->extensions; 3599 3600 if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM, 3601 block->checksum) <= 0) 3602 drm_dbg_kms(&i915->drm, 3603 "Failed to write EDID checksum\n"); 3604 3605 test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE; 3606 intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED; 3607 } 3608 3609 /* Set test active flag here so userspace doesn't interrupt things */ 3610 intel_dp->compliance.test_active = true; 3611 3612 return test_result; 3613 } 3614 3615 static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp, 3616 const struct intel_crtc_state *crtc_state) 3617 { 3618 struct drm_i915_private *dev_priv = 3619 to_i915(dp_to_dig_port(intel_dp)->base.base.dev); 3620 struct drm_dp_phy_test_params *data = 3621 &intel_dp->compliance.test_data.phytest; 3622 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 3623 enum pipe pipe = crtc->pipe; 3624 u32 pattern_val; 3625 3626 switch (data->phy_pattern) { 3627 case DP_PHY_TEST_PATTERN_NONE: 3628 drm_dbg_kms(&dev_priv->drm, "Disable Phy Test Pattern\n"); 3629 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0); 3630 break; 3631 case DP_PHY_TEST_PATTERN_D10_2: 3632 drm_dbg_kms(&dev_priv->drm, "Set D10.2 Phy Test Pattern\n"); 3633 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3634 DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2); 3635 break; 3636 case DP_PHY_TEST_PATTERN_ERROR_COUNT: 3637 drm_dbg_kms(&dev_priv->drm, "Set Error Count Phy Test Pattern\n"); 3638 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3639 DDI_DP_COMP_CTL_ENABLE | 3640 DDI_DP_COMP_CTL_SCRAMBLED_0); 3641 break; 3642 case DP_PHY_TEST_PATTERN_PRBS7: 3643 drm_dbg_kms(&dev_priv->drm, "Set PRBS7 Phy Test Pattern\n"); 3644 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3645 DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7); 3646 break; 3647 case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: 3648 /* 3649 * FIXME: Ideally pattern should come from DPCD 0x250. As 3650 * current firmware of DPR-100 could not set it, so hardcoding 3651 * now for complaince test. 3652 */ 3653 drm_dbg_kms(&dev_priv->drm, 3654 "Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n"); 3655 pattern_val = 0x3e0f83e0; 3656 intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val); 3657 pattern_val = 0x0f83e0f8; 3658 intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val); 3659 pattern_val = 0x0000f83e; 3660 intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val); 3661 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3662 DDI_DP_COMP_CTL_ENABLE | 3663 DDI_DP_COMP_CTL_CUSTOM80); 3664 break; 3665 case DP_PHY_TEST_PATTERN_CP2520: 3666 /* 3667 * FIXME: Ideally pattern should come from DPCD 0x24A. As 3668 * current firmware of DPR-100 could not set it, so hardcoding 3669 * now for complaince test. 3670 */ 3671 drm_dbg_kms(&dev_priv->drm, "Set HBR2 compliance Phy Test Pattern\n"); 3672 pattern_val = 0xFB; 3673 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3674 DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 | 3675 pattern_val); 3676 break; 3677 default: 3678 WARN(1, "Invalid Phy Test Pattern\n"); 3679 } 3680 } 3681 3682 static void 3683 intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp, 3684 const struct intel_crtc_state *crtc_state) 3685 { 3686 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 3687 struct drm_device *dev = dig_port->base.base.dev; 3688 struct drm_i915_private *dev_priv = to_i915(dev); 3689 struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); 3690 enum pipe pipe = crtc->pipe; 3691 u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value; 3692 3693 trans_ddi_func_ctl_value = intel_de_read(dev_priv, 3694 TRANS_DDI_FUNC_CTL(pipe)); 3695 trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe)); 3696 dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe)); 3697 3698 trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE | 3699 TGL_TRANS_DDI_PORT_MASK); 3700 trans_conf_value &= ~PIPECONF_ENABLE; 3701 dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE; 3702 3703 intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value); 3704 intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe), 3705 trans_ddi_func_ctl_value); 3706 intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value); 3707 } 3708 3709 static void 3710 intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp, 3711 const struct intel_crtc_state *crtc_state) 3712 { 3713 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 3714 struct drm_device *dev = dig_port->base.base.dev; 3715 struct drm_i915_private *dev_priv = to_i915(dev); 3716 enum port port = dig_port->base.port; 3717 struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); 3718 enum pipe pipe = crtc->pipe; 3719 u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value; 3720 3721 trans_ddi_func_ctl_value = intel_de_read(dev_priv, 3722 TRANS_DDI_FUNC_CTL(pipe)); 3723 trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe)); 3724 dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe)); 3725 3726 trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE | 3727 TGL_TRANS_DDI_SELECT_PORT(port); 3728 trans_conf_value |= PIPECONF_ENABLE; 3729 dp_tp_ctl_value |= DP_TP_CTL_ENABLE; 3730 3731 intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value); 3732 intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value); 3733 intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe), 3734 trans_ddi_func_ctl_value); 3735 } 3736 3737 static void intel_dp_process_phy_request(struct intel_dp *intel_dp, 3738 const struct intel_crtc_state *crtc_state) 3739 { 3740 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3741 struct drm_dp_phy_test_params *data = 3742 &intel_dp->compliance.test_data.phytest; 3743 u8 link_status[DP_LINK_STATUS_SIZE]; 3744 3745 if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX, 3746 link_status) < 0) { 3747 drm_dbg_kms(&i915->drm, "failed to get link status\n"); 3748 return; 3749 } 3750 3751 /* retrieve vswing & pre-emphasis setting */ 3752 intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, 3753 link_status); 3754 3755 intel_dp_autotest_phy_ddi_disable(intel_dp, crtc_state); 3756 3757 intel_dp_set_signal_levels(intel_dp, crtc_state, DP_PHY_DPRX); 3758 3759 intel_dp_phy_pattern_update(intel_dp, crtc_state); 3760 3761 intel_dp_autotest_phy_ddi_enable(intel_dp, crtc_state); 3762 3763 drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET, 3764 intel_dp->train_set, crtc_state->lane_count); 3765 3766 drm_dp_set_phy_test_pattern(&intel_dp->aux, data, 3767 link_status[DP_DPCD_REV]); 3768 } 3769 3770 static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp) 3771 { 3772 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3773 struct drm_dp_phy_test_params *data = 3774 &intel_dp->compliance.test_data.phytest; 3775 3776 if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) { 3777 drm_dbg_kms(&i915->drm, "DP Phy Test pattern AUX read failure\n"); 3778 return DP_TEST_NAK; 3779 } 3780 3781 /* Set test active flag here so userspace doesn't interrupt things */ 3782 intel_dp->compliance.test_active = true; 3783 3784 return DP_TEST_ACK; 3785 } 3786 3787 static void intel_dp_handle_test_request(struct intel_dp *intel_dp) 3788 { 3789 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3790 u8 response = DP_TEST_NAK; 3791 u8 request = 0; 3792 int status; 3793 3794 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request); 3795 if (status <= 0) { 3796 drm_dbg_kms(&i915->drm, 3797 "Could not read test request from sink\n"); 3798 goto update_status; 3799 } 3800 3801 switch (request) { 3802 case DP_TEST_LINK_TRAINING: 3803 drm_dbg_kms(&i915->drm, "LINK_TRAINING test requested\n"); 3804 response = intel_dp_autotest_link_training(intel_dp); 3805 break; 3806 case DP_TEST_LINK_VIDEO_PATTERN: 3807 drm_dbg_kms(&i915->drm, "TEST_PATTERN test requested\n"); 3808 response = intel_dp_autotest_video_pattern(intel_dp); 3809 break; 3810 case DP_TEST_LINK_EDID_READ: 3811 drm_dbg_kms(&i915->drm, "EDID test requested\n"); 3812 response = intel_dp_autotest_edid(intel_dp); 3813 break; 3814 case DP_TEST_LINK_PHY_TEST_PATTERN: 3815 drm_dbg_kms(&i915->drm, "PHY_PATTERN test requested\n"); 3816 response = intel_dp_autotest_phy_pattern(intel_dp); 3817 break; 3818 default: 3819 drm_dbg_kms(&i915->drm, "Invalid test request '%02x'\n", 3820 request); 3821 break; 3822 } 3823 3824 if (response & DP_TEST_ACK) 3825 intel_dp->compliance.test_type = request; 3826 3827 update_status: 3828 status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response); 3829 if (status <= 0) 3830 drm_dbg_kms(&i915->drm, 3831 "Could not write test response to sink\n"); 3832 } 3833 3834 static bool intel_dp_link_ok(struct intel_dp *intel_dp, 3835 u8 link_status[DP_LINK_STATUS_SIZE]) 3836 { 3837 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 3838 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 3839 bool uhbr = intel_dp->link_rate >= 1000000; 3840 bool ok; 3841 3842 if (uhbr) 3843 ok = drm_dp_128b132b_lane_channel_eq_done(link_status, 3844 intel_dp->lane_count); 3845 else 3846 ok = drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); 3847 3848 if (ok) 3849 return true; 3850 3851 intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); 3852 drm_dbg_kms(&i915->drm, 3853 "[ENCODER:%d:%s] %s link not ok, retraining\n", 3854 encoder->base.base.id, encoder->base.name, 3855 uhbr ? "128b/132b" : "8b/10b"); 3856 3857 return false; 3858 } 3859 3860 static void 3861 intel_dp_mst_hpd_irq(struct intel_dp *intel_dp, u8 *esi, u8 *ack) 3862 { 3863 bool handled = false; 3864 3865 drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled); 3866 if (handled) 3867 ack[1] |= esi[1] & (DP_DOWN_REP_MSG_RDY | DP_UP_REQ_MSG_RDY); 3868 3869 if (esi[1] & DP_CP_IRQ) { 3870 intel_hdcp_handle_cp_irq(intel_dp->attached_connector); 3871 ack[1] |= DP_CP_IRQ; 3872 } 3873 } 3874 3875 static bool intel_dp_mst_link_status(struct intel_dp *intel_dp) 3876 { 3877 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 3878 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 3879 u8 link_status[DP_LINK_STATUS_SIZE] = {}; 3880 const size_t esi_link_status_size = DP_LINK_STATUS_SIZE - 2; 3881 3882 if (drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS_ESI, link_status, 3883 esi_link_status_size) != esi_link_status_size) { 3884 drm_err(&i915->drm, 3885 "[ENCODER:%d:%s] Failed to read link status\n", 3886 encoder->base.base.id, encoder->base.name); 3887 return false; 3888 } 3889 3890 return intel_dp_link_ok(intel_dp, link_status); 3891 } 3892 3893 /** 3894 * intel_dp_check_mst_status - service any pending MST interrupts, check link status 3895 * @intel_dp: Intel DP struct 3896 * 3897 * Read any pending MST interrupts, call MST core to handle these and ack the 3898 * interrupts. Check if the main and AUX link state is ok. 3899 * 3900 * Returns: 3901 * - %true if pending interrupts were serviced (or no interrupts were 3902 * pending) w/o detecting an error condition. 3903 * - %false if an error condition - like AUX failure or a loss of link - is 3904 * detected, which needs servicing from the hotplug work. 3905 */ 3906 static bool 3907 intel_dp_check_mst_status(struct intel_dp *intel_dp) 3908 { 3909 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3910 bool link_ok = true; 3911 3912 drm_WARN_ON_ONCE(&i915->drm, intel_dp->active_mst_links < 0); 3913 3914 for (;;) { 3915 u8 esi[4] = {}; 3916 u8 ack[4] = {}; 3917 3918 if (!intel_dp_get_sink_irq_esi(intel_dp, esi)) { 3919 drm_dbg_kms(&i915->drm, 3920 "failed to get ESI - device may have failed\n"); 3921 link_ok = false; 3922 3923 break; 3924 } 3925 3926 drm_dbg_kms(&i915->drm, "DPRX ESI: %4ph\n", esi); 3927 3928 if (intel_dp->active_mst_links > 0 && link_ok && 3929 esi[3] & LINK_STATUS_CHANGED) { 3930 if (!intel_dp_mst_link_status(intel_dp)) 3931 link_ok = false; 3932 ack[3] |= LINK_STATUS_CHANGED; 3933 } 3934 3935 intel_dp_mst_hpd_irq(intel_dp, esi, ack); 3936 3937 if (!memchr_inv(ack, 0, sizeof(ack))) 3938 break; 3939 3940 if (!intel_dp_ack_sink_irq_esi(intel_dp, ack)) 3941 drm_dbg_kms(&i915->drm, "Failed to ack ESI\n"); 3942 } 3943 3944 return link_ok; 3945 } 3946 3947 static void 3948 intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp) 3949 { 3950 bool is_active; 3951 u8 buf = 0; 3952 3953 is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux); 3954 if (intel_dp->frl.is_trained && !is_active) { 3955 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf) < 0) 3956 return; 3957 3958 buf &= ~DP_PCON_ENABLE_HDMI_LINK; 3959 if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf) < 0) 3960 return; 3961 3962 drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base); 3963 3964 intel_dp->frl.is_trained = false; 3965 3966 /* Restart FRL training or fall back to TMDS mode */ 3967 intel_dp_check_frl_training(intel_dp); 3968 } 3969 } 3970 3971 static bool 3972 intel_dp_needs_link_retrain(struct intel_dp *intel_dp) 3973 { 3974 u8 link_status[DP_LINK_STATUS_SIZE]; 3975 3976 if (!intel_dp->link_trained) 3977 return false; 3978 3979 /* 3980 * While PSR source HW is enabled, it will control main-link sending 3981 * frames, enabling and disabling it so trying to do a retrain will fail 3982 * as the link would or not be on or it could mix training patterns 3983 * and frame data at the same time causing retrain to fail. 3984 * Also when exiting PSR, HW will retrain the link anyways fixing 3985 * any link status error. 3986 */ 3987 if (intel_psr_enabled(intel_dp)) 3988 return false; 3989 3990 if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX, 3991 link_status) < 0) 3992 return false; 3993 3994 /* 3995 * Validate the cached values of intel_dp->link_rate and 3996 * intel_dp->lane_count before attempting to retrain. 3997 * 3998 * FIXME would be nice to user the crtc state here, but since 3999 * we need to call this from the short HPD handler that seems 4000 * a bit hard. 4001 */ 4002 if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate, 4003 intel_dp->lane_count)) 4004 return false; 4005 4006 /* Retrain if link not ok */ 4007 return !intel_dp_link_ok(intel_dp, link_status); 4008 } 4009 4010 static bool intel_dp_has_connector(struct intel_dp *intel_dp, 4011 const struct drm_connector_state *conn_state) 4012 { 4013 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4014 struct intel_encoder *encoder; 4015 enum pipe pipe; 4016 4017 if (!conn_state->best_encoder) 4018 return false; 4019 4020 /* SST */ 4021 encoder = &dp_to_dig_port(intel_dp)->base; 4022 if (conn_state->best_encoder == &encoder->base) 4023 return true; 4024 4025 /* MST */ 4026 for_each_pipe(i915, pipe) { 4027 encoder = &intel_dp->mst_encoders[pipe]->base; 4028 if (conn_state->best_encoder == &encoder->base) 4029 return true; 4030 } 4031 4032 return false; 4033 } 4034 4035 static int intel_dp_prep_link_retrain(struct intel_dp *intel_dp, 4036 struct drm_modeset_acquire_ctx *ctx, 4037 u8 *pipe_mask) 4038 { 4039 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4040 struct drm_connector_list_iter conn_iter; 4041 struct intel_connector *connector; 4042 int ret = 0; 4043 4044 *pipe_mask = 0; 4045 4046 if (!intel_dp_needs_link_retrain(intel_dp)) 4047 return 0; 4048 4049 drm_connector_list_iter_begin(&i915->drm, &conn_iter); 4050 for_each_intel_connector_iter(connector, &conn_iter) { 4051 struct drm_connector_state *conn_state = 4052 connector->base.state; 4053 struct intel_crtc_state *crtc_state; 4054 struct intel_crtc *crtc; 4055 4056 if (!intel_dp_has_connector(intel_dp, conn_state)) 4057 continue; 4058 4059 crtc = to_intel_crtc(conn_state->crtc); 4060 if (!crtc) 4061 continue; 4062 4063 ret = drm_modeset_lock(&crtc->base.mutex, ctx); 4064 if (ret) 4065 break; 4066 4067 crtc_state = to_intel_crtc_state(crtc->base.state); 4068 4069 drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state)); 4070 4071 if (!crtc_state->hw.active) 4072 continue; 4073 4074 if (conn_state->commit && 4075 !try_wait_for_completion(&conn_state->commit->hw_done)) 4076 continue; 4077 4078 *pipe_mask |= BIT(crtc->pipe); 4079 } 4080 drm_connector_list_iter_end(&conn_iter); 4081 4082 if (!intel_dp_needs_link_retrain(intel_dp)) 4083 *pipe_mask = 0; 4084 4085 return ret; 4086 } 4087 4088 static bool intel_dp_is_connected(struct intel_dp *intel_dp) 4089 { 4090 struct intel_connector *connector = intel_dp->attached_connector; 4091 4092 return connector->base.status == connector_status_connected || 4093 intel_dp->is_mst; 4094 } 4095 4096 int intel_dp_retrain_link(struct intel_encoder *encoder, 4097 struct drm_modeset_acquire_ctx *ctx) 4098 { 4099 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 4100 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 4101 struct intel_crtc *crtc; 4102 u8 pipe_mask; 4103 int ret; 4104 4105 if (!intel_dp_is_connected(intel_dp)) 4106 return 0; 4107 4108 ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, 4109 ctx); 4110 if (ret) 4111 return ret; 4112 4113 ret = intel_dp_prep_link_retrain(intel_dp, ctx, &pipe_mask); 4114 if (ret) 4115 return ret; 4116 4117 if (pipe_mask == 0) 4118 return 0; 4119 4120 drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] retraining link\n", 4121 encoder->base.base.id, encoder->base.name); 4122 4123 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4124 const struct intel_crtc_state *crtc_state = 4125 to_intel_crtc_state(crtc->base.state); 4126 4127 /* Suppress underruns caused by re-training */ 4128 intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false); 4129 if (crtc_state->has_pch_encoder) 4130 intel_set_pch_fifo_underrun_reporting(dev_priv, 4131 intel_crtc_pch_transcoder(crtc), false); 4132 } 4133 4134 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4135 const struct intel_crtc_state *crtc_state = 4136 to_intel_crtc_state(crtc->base.state); 4137 4138 /* retrain on the MST master transcoder */ 4139 if (DISPLAY_VER(dev_priv) >= 12 && 4140 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) && 4141 !intel_dp_mst_is_master_trans(crtc_state)) 4142 continue; 4143 4144 intel_dp_check_frl_training(intel_dp); 4145 intel_dp_pcon_dsc_configure(intel_dp, crtc_state); 4146 intel_dp_start_link_train(intel_dp, crtc_state); 4147 intel_dp_stop_link_train(intel_dp, crtc_state); 4148 break; 4149 } 4150 4151 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4152 const struct intel_crtc_state *crtc_state = 4153 to_intel_crtc_state(crtc->base.state); 4154 4155 /* Keep underrun reporting disabled until things are stable */ 4156 intel_crtc_wait_for_next_vblank(crtc); 4157 4158 intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true); 4159 if (crtc_state->has_pch_encoder) 4160 intel_set_pch_fifo_underrun_reporting(dev_priv, 4161 intel_crtc_pch_transcoder(crtc), true); 4162 } 4163 4164 return 0; 4165 } 4166 4167 static int intel_dp_prep_phy_test(struct intel_dp *intel_dp, 4168 struct drm_modeset_acquire_ctx *ctx, 4169 u8 *pipe_mask) 4170 { 4171 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4172 struct drm_connector_list_iter conn_iter; 4173 struct intel_connector *connector; 4174 int ret = 0; 4175 4176 *pipe_mask = 0; 4177 4178 drm_connector_list_iter_begin(&i915->drm, &conn_iter); 4179 for_each_intel_connector_iter(connector, &conn_iter) { 4180 struct drm_connector_state *conn_state = 4181 connector->base.state; 4182 struct intel_crtc_state *crtc_state; 4183 struct intel_crtc *crtc; 4184 4185 if (!intel_dp_has_connector(intel_dp, conn_state)) 4186 continue; 4187 4188 crtc = to_intel_crtc(conn_state->crtc); 4189 if (!crtc) 4190 continue; 4191 4192 ret = drm_modeset_lock(&crtc->base.mutex, ctx); 4193 if (ret) 4194 break; 4195 4196 crtc_state = to_intel_crtc_state(crtc->base.state); 4197 4198 drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state)); 4199 4200 if (!crtc_state->hw.active) 4201 continue; 4202 4203 if (conn_state->commit && 4204 !try_wait_for_completion(&conn_state->commit->hw_done)) 4205 continue; 4206 4207 *pipe_mask |= BIT(crtc->pipe); 4208 } 4209 drm_connector_list_iter_end(&conn_iter); 4210 4211 return ret; 4212 } 4213 4214 static int intel_dp_do_phy_test(struct intel_encoder *encoder, 4215 struct drm_modeset_acquire_ctx *ctx) 4216 { 4217 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 4218 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 4219 struct intel_crtc *crtc; 4220 u8 pipe_mask; 4221 int ret; 4222 4223 ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, 4224 ctx); 4225 if (ret) 4226 return ret; 4227 4228 ret = intel_dp_prep_phy_test(intel_dp, ctx, &pipe_mask); 4229 if (ret) 4230 return ret; 4231 4232 if (pipe_mask == 0) 4233 return 0; 4234 4235 drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] PHY test\n", 4236 encoder->base.base.id, encoder->base.name); 4237 4238 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4239 const struct intel_crtc_state *crtc_state = 4240 to_intel_crtc_state(crtc->base.state); 4241 4242 /* test on the MST master transcoder */ 4243 if (DISPLAY_VER(dev_priv) >= 12 && 4244 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) && 4245 !intel_dp_mst_is_master_trans(crtc_state)) 4246 continue; 4247 4248 intel_dp_process_phy_request(intel_dp, crtc_state); 4249 break; 4250 } 4251 4252 return 0; 4253 } 4254 4255 void intel_dp_phy_test(struct intel_encoder *encoder) 4256 { 4257 struct drm_modeset_acquire_ctx ctx; 4258 int ret; 4259 4260 drm_modeset_acquire_init(&ctx, 0); 4261 4262 for (;;) { 4263 ret = intel_dp_do_phy_test(encoder, &ctx); 4264 4265 if (ret == -EDEADLK) { 4266 drm_modeset_backoff(&ctx); 4267 continue; 4268 } 4269 4270 break; 4271 } 4272 4273 drm_modeset_drop_locks(&ctx); 4274 drm_modeset_acquire_fini(&ctx); 4275 drm_WARN(encoder->base.dev, ret, 4276 "Acquiring modeset locks failed with %i\n", ret); 4277 } 4278 4279 static void intel_dp_check_device_service_irq(struct intel_dp *intel_dp) 4280 { 4281 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4282 u8 val; 4283 4284 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) 4285 return; 4286 4287 if (drm_dp_dpcd_readb(&intel_dp->aux, 4288 DP_DEVICE_SERVICE_IRQ_VECTOR, &val) != 1 || !val) 4289 return; 4290 4291 drm_dp_dpcd_writeb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, val); 4292 4293 if (val & DP_AUTOMATED_TEST_REQUEST) 4294 intel_dp_handle_test_request(intel_dp); 4295 4296 if (val & DP_CP_IRQ) 4297 intel_hdcp_handle_cp_irq(intel_dp->attached_connector); 4298 4299 if (val & DP_SINK_SPECIFIC_IRQ) 4300 drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n"); 4301 } 4302 4303 static void intel_dp_check_link_service_irq(struct intel_dp *intel_dp) 4304 { 4305 u8 val; 4306 4307 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) 4308 return; 4309 4310 if (drm_dp_dpcd_readb(&intel_dp->aux, 4311 DP_LINK_SERVICE_IRQ_VECTOR_ESI0, &val) != 1 || !val) 4312 return; 4313 4314 if (drm_dp_dpcd_writeb(&intel_dp->aux, 4315 DP_LINK_SERVICE_IRQ_VECTOR_ESI0, val) != 1) 4316 return; 4317 4318 if (val & HDMI_LINK_STATUS_CHANGED) 4319 intel_dp_handle_hdmi_link_status_change(intel_dp); 4320 } 4321 4322 /* 4323 * According to DP spec 4324 * 5.1.2: 4325 * 1. Read DPCD 4326 * 2. Configure link according to Receiver Capabilities 4327 * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 4328 * 4. Check link status on receipt of hot-plug interrupt 4329 * 4330 * intel_dp_short_pulse - handles short pulse interrupts 4331 * when full detection is not required. 4332 * Returns %true if short pulse is handled and full detection 4333 * is NOT required and %false otherwise. 4334 */ 4335 static bool 4336 intel_dp_short_pulse(struct intel_dp *intel_dp) 4337 { 4338 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 4339 u8 old_sink_count = intel_dp->sink_count; 4340 bool ret; 4341 4342 /* 4343 * Clearing compliance test variables to allow capturing 4344 * of values for next automated test request. 4345 */ 4346 memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); 4347 4348 /* 4349 * Now read the DPCD to see if it's actually running 4350 * If the current value of sink count doesn't match with 4351 * the value that was stored earlier or dpcd read failed 4352 * we need to do full detection 4353 */ 4354 ret = intel_dp_get_dpcd(intel_dp); 4355 4356 if ((old_sink_count != intel_dp->sink_count) || !ret) { 4357 /* No need to proceed if we are going to do full detect */ 4358 return false; 4359 } 4360 4361 intel_dp_check_device_service_irq(intel_dp); 4362 intel_dp_check_link_service_irq(intel_dp); 4363 4364 /* Handle CEC interrupts, if any */ 4365 drm_dp_cec_irq(&intel_dp->aux); 4366 4367 /* defer to the hotplug work for link retraining if needed */ 4368 if (intel_dp_needs_link_retrain(intel_dp)) 4369 return false; 4370 4371 intel_psr_short_pulse(intel_dp); 4372 4373 switch (intel_dp->compliance.test_type) { 4374 case DP_TEST_LINK_TRAINING: 4375 drm_dbg_kms(&dev_priv->drm, 4376 "Link Training Compliance Test requested\n"); 4377 /* Send a Hotplug Uevent to userspace to start modeset */ 4378 drm_kms_helper_hotplug_event(&dev_priv->drm); 4379 break; 4380 case DP_TEST_LINK_PHY_TEST_PATTERN: 4381 drm_dbg_kms(&dev_priv->drm, 4382 "PHY test pattern Compliance Test requested\n"); 4383 /* 4384 * Schedule long hpd to do the test 4385 * 4386 * FIXME get rid of the ad-hoc phy test modeset code 4387 * and properly incorporate it into the normal modeset. 4388 */ 4389 return false; 4390 } 4391 4392 return true; 4393 } 4394 4395 /* XXX this is probably wrong for multiple downstream ports */ 4396 static enum drm_connector_status 4397 intel_dp_detect_dpcd(struct intel_dp *intel_dp) 4398 { 4399 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4400 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4401 u8 *dpcd = intel_dp->dpcd; 4402 u8 type; 4403 4404 if (drm_WARN_ON(&i915->drm, intel_dp_is_edp(intel_dp))) 4405 return connector_status_connected; 4406 4407 lspcon_resume(dig_port); 4408 4409 if (!intel_dp_get_dpcd(intel_dp)) 4410 return connector_status_disconnected; 4411 4412 /* if there's no downstream port, we're done */ 4413 if (!drm_dp_is_branch(dpcd)) 4414 return connector_status_connected; 4415 4416 /* If we're HPD-aware, SINK_COUNT changes dynamically */ 4417 if (intel_dp_has_sink_count(intel_dp) && 4418 intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { 4419 return intel_dp->sink_count ? 4420 connector_status_connected : connector_status_disconnected; 4421 } 4422 4423 if (intel_dp_can_mst(intel_dp)) 4424 return connector_status_connected; 4425 4426 /* If no HPD, poke DDC gently */ 4427 if (drm_probe_ddc(&intel_dp->aux.ddc)) 4428 return connector_status_connected; 4429 4430 /* Well we tried, say unknown for unreliable port types */ 4431 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { 4432 type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK; 4433 if (type == DP_DS_PORT_TYPE_VGA || 4434 type == DP_DS_PORT_TYPE_NON_EDID) 4435 return connector_status_unknown; 4436 } else { 4437 type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & 4438 DP_DWN_STRM_PORT_TYPE_MASK; 4439 if (type == DP_DWN_STRM_PORT_TYPE_ANALOG || 4440 type == DP_DWN_STRM_PORT_TYPE_OTHER) 4441 return connector_status_unknown; 4442 } 4443 4444 /* Anything else is out of spec, warn and ignore */ 4445 drm_dbg_kms(&i915->drm, "Broken DP branch device, ignoring\n"); 4446 return connector_status_disconnected; 4447 } 4448 4449 static enum drm_connector_status 4450 edp_detect(struct intel_dp *intel_dp) 4451 { 4452 return connector_status_connected; 4453 } 4454 4455 /* 4456 * intel_digital_port_connected - is the specified port connected? 4457 * @encoder: intel_encoder 4458 * 4459 * In cases where there's a connector physically connected but it can't be used 4460 * by our hardware we also return false, since the rest of the driver should 4461 * pretty much treat the port as disconnected. This is relevant for type-C 4462 * (starting on ICL) where there's ownership involved. 4463 * 4464 * Return %true if port is connected, %false otherwise. 4465 */ 4466 bool intel_digital_port_connected(struct intel_encoder *encoder) 4467 { 4468 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 4469 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 4470 bool is_connected = false; 4471 intel_wakeref_t wakeref; 4472 4473 with_intel_display_power(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref) 4474 is_connected = dig_port->connected(encoder); 4475 4476 return is_connected; 4477 } 4478 4479 static struct edid * 4480 intel_dp_get_edid(struct intel_dp *intel_dp) 4481 { 4482 struct intel_connector *intel_connector = intel_dp->attached_connector; 4483 4484 /* use cached edid if we have one */ 4485 if (intel_connector->edid) { 4486 /* invalid edid */ 4487 if (IS_ERR(intel_connector->edid)) 4488 return NULL; 4489 4490 return drm_edid_duplicate(intel_connector->edid); 4491 } else 4492 return drm_get_edid(&intel_connector->base, 4493 &intel_dp->aux.ddc); 4494 } 4495 4496 static void 4497 intel_dp_update_dfp(struct intel_dp *intel_dp, 4498 const struct edid *edid) 4499 { 4500 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4501 struct intel_connector *connector = intel_dp->attached_connector; 4502 4503 intel_dp->dfp.max_bpc = 4504 drm_dp_downstream_max_bpc(intel_dp->dpcd, 4505 intel_dp->downstream_ports, edid); 4506 4507 intel_dp->dfp.max_dotclock = 4508 drm_dp_downstream_max_dotclock(intel_dp->dpcd, 4509 intel_dp->downstream_ports); 4510 4511 intel_dp->dfp.min_tmds_clock = 4512 drm_dp_downstream_min_tmds_clock(intel_dp->dpcd, 4513 intel_dp->downstream_ports, 4514 edid); 4515 intel_dp->dfp.max_tmds_clock = 4516 drm_dp_downstream_max_tmds_clock(intel_dp->dpcd, 4517 intel_dp->downstream_ports, 4518 edid); 4519 4520 intel_dp->dfp.pcon_max_frl_bw = 4521 drm_dp_get_pcon_max_frl_bw(intel_dp->dpcd, 4522 intel_dp->downstream_ports); 4523 4524 drm_dbg_kms(&i915->drm, 4525 "[CONNECTOR:%d:%s] DFP max bpc %d, max dotclock %d, TMDS clock %d-%d, PCON Max FRL BW %dGbps\n", 4526 connector->base.base.id, connector->base.name, 4527 intel_dp->dfp.max_bpc, 4528 intel_dp->dfp.max_dotclock, 4529 intel_dp->dfp.min_tmds_clock, 4530 intel_dp->dfp.max_tmds_clock, 4531 intel_dp->dfp.pcon_max_frl_bw); 4532 4533 intel_dp_get_pcon_dsc_cap(intel_dp); 4534 } 4535 4536 static void 4537 intel_dp_update_420(struct intel_dp *intel_dp) 4538 { 4539 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4540 struct intel_connector *connector = intel_dp->attached_connector; 4541 bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420, rgb_to_ycbcr; 4542 4543 /* No YCbCr output support on gmch platforms */ 4544 if (HAS_GMCH(i915)) 4545 return; 4546 4547 /* 4548 * ILK doesn't seem capable of DP YCbCr output. The 4549 * displayed image is severly corrupted. SNB+ is fine. 4550 */ 4551 if (IS_IRONLAKE(i915)) 4552 return; 4553 4554 is_branch = drm_dp_is_branch(intel_dp->dpcd); 4555 ycbcr_420_passthrough = 4556 drm_dp_downstream_420_passthrough(intel_dp->dpcd, 4557 intel_dp->downstream_ports); 4558 /* on-board LSPCON always assumed to support 4:4:4->4:2:0 conversion */ 4559 ycbcr_444_to_420 = 4560 dp_to_dig_port(intel_dp)->lspcon.active || 4561 drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd, 4562 intel_dp->downstream_ports); 4563 rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, 4564 intel_dp->downstream_ports, 4565 DP_DS_HDMI_BT709_RGB_YCBCR_CONV); 4566 4567 if (DISPLAY_VER(i915) >= 11) { 4568 /* Let PCON convert from RGB->YCbCr if possible */ 4569 if (is_branch && rgb_to_ycbcr && ycbcr_444_to_420) { 4570 intel_dp->dfp.rgb_to_ycbcr = true; 4571 intel_dp->dfp.ycbcr_444_to_420 = true; 4572 connector->base.ycbcr_420_allowed = true; 4573 } else { 4574 /* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */ 4575 intel_dp->dfp.ycbcr_444_to_420 = 4576 ycbcr_444_to_420 && !ycbcr_420_passthrough; 4577 4578 connector->base.ycbcr_420_allowed = 4579 !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; 4580 } 4581 } else { 4582 /* 4:4:4->4:2:0 conversion is the only way */ 4583 intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420; 4584 4585 connector->base.ycbcr_420_allowed = ycbcr_444_to_420; 4586 } 4587 4588 drm_dbg_kms(&i915->drm, 4589 "[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", 4590 connector->base.base.id, connector->base.name, 4591 str_yes_no(intel_dp->dfp.rgb_to_ycbcr), 4592 str_yes_no(connector->base.ycbcr_420_allowed), 4593 str_yes_no(intel_dp->dfp.ycbcr_444_to_420)); 4594 } 4595 4596 static void 4597 intel_dp_set_edid(struct intel_dp *intel_dp) 4598 { 4599 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4600 struct intel_connector *connector = intel_dp->attached_connector; 4601 struct edid *edid; 4602 bool vrr_capable; 4603 4604 intel_dp_unset_edid(intel_dp); 4605 edid = intel_dp_get_edid(intel_dp); 4606 connector->detect_edid = edid; 4607 4608 vrr_capable = intel_vrr_is_capable(connector); 4609 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] VRR capable: %s\n", 4610 connector->base.base.id, connector->base.name, str_yes_no(vrr_capable)); 4611 drm_connector_set_vrr_capable_property(&connector->base, vrr_capable); 4612 4613 intel_dp_update_dfp(intel_dp, edid); 4614 intel_dp_update_420(intel_dp); 4615 4616 if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { 4617 intel_dp->has_hdmi_sink = drm_detect_hdmi_monitor(edid); 4618 intel_dp->has_audio = drm_detect_monitor_audio(edid); 4619 } 4620 4621 drm_dp_cec_set_edid(&intel_dp->aux, edid); 4622 } 4623 4624 static void 4625 intel_dp_unset_edid(struct intel_dp *intel_dp) 4626 { 4627 struct intel_connector *connector = intel_dp->attached_connector; 4628 4629 drm_dp_cec_unset_edid(&intel_dp->aux); 4630 kfree(connector->detect_edid); 4631 connector->detect_edid = NULL; 4632 4633 intel_dp->has_hdmi_sink = false; 4634 intel_dp->has_audio = false; 4635 4636 intel_dp->dfp.max_bpc = 0; 4637 intel_dp->dfp.max_dotclock = 0; 4638 intel_dp->dfp.min_tmds_clock = 0; 4639 intel_dp->dfp.max_tmds_clock = 0; 4640 4641 intel_dp->dfp.pcon_max_frl_bw = 0; 4642 4643 intel_dp->dfp.ycbcr_444_to_420 = false; 4644 connector->base.ycbcr_420_allowed = false; 4645 4646 drm_connector_set_vrr_capable_property(&connector->base, 4647 false); 4648 } 4649 4650 static int 4651 intel_dp_detect(struct drm_connector *connector, 4652 struct drm_modeset_acquire_ctx *ctx, 4653 bool force) 4654 { 4655 struct drm_i915_private *dev_priv = to_i915(connector->dev); 4656 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4657 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4658 struct intel_encoder *encoder = &dig_port->base; 4659 enum drm_connector_status status; 4660 4661 drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", 4662 connector->base.id, connector->name); 4663 drm_WARN_ON(&dev_priv->drm, 4664 !drm_modeset_is_locked(&dev_priv->drm.mode_config.connection_mutex)); 4665 4666 if (!INTEL_DISPLAY_ENABLED(dev_priv)) 4667 return connector_status_disconnected; 4668 4669 /* Can't disconnect eDP */ 4670 if (intel_dp_is_edp(intel_dp)) 4671 status = edp_detect(intel_dp); 4672 else if (intel_digital_port_connected(encoder)) 4673 status = intel_dp_detect_dpcd(intel_dp); 4674 else 4675 status = connector_status_disconnected; 4676 4677 if (status == connector_status_disconnected) { 4678 memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); 4679 memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd)); 4680 4681 if (intel_dp->is_mst) { 4682 drm_dbg_kms(&dev_priv->drm, 4683 "MST device may have disappeared %d vs %d\n", 4684 intel_dp->is_mst, 4685 intel_dp->mst_mgr.mst_state); 4686 intel_dp->is_mst = false; 4687 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, 4688 intel_dp->is_mst); 4689 } 4690 4691 goto out; 4692 } 4693 4694 /* Read DP Sink DSC Cap DPCD regs for DP v1.4 */ 4695 if (DISPLAY_VER(dev_priv) >= 11) 4696 intel_dp_get_dsc_sink_cap(intel_dp); 4697 4698 intel_dp_configure_mst(intel_dp); 4699 4700 /* 4701 * TODO: Reset link params when switching to MST mode, until MST 4702 * supports link training fallback params. 4703 */ 4704 if (intel_dp->reset_link_params || intel_dp->is_mst) { 4705 intel_dp_reset_max_link_params(intel_dp); 4706 intel_dp->reset_link_params = false; 4707 } 4708 4709 intel_dp_print_rates(intel_dp); 4710 4711 if (intel_dp->is_mst) { 4712 /* 4713 * If we are in MST mode then this connector 4714 * won't appear connected or have anything 4715 * with EDID on it 4716 */ 4717 status = connector_status_disconnected; 4718 goto out; 4719 } 4720 4721 /* 4722 * Some external monitors do not signal loss of link synchronization 4723 * with an IRQ_HPD, so force a link status check. 4724 */ 4725 if (!intel_dp_is_edp(intel_dp)) { 4726 int ret; 4727 4728 ret = intel_dp_retrain_link(encoder, ctx); 4729 if (ret) 4730 return ret; 4731 } 4732 4733 /* 4734 * Clearing NACK and defer counts to get their exact values 4735 * while reading EDID which are required by Compliance tests 4736 * 4.2.2.4 and 4.2.2.5 4737 */ 4738 intel_dp->aux.i2c_nack_count = 0; 4739 intel_dp->aux.i2c_defer_count = 0; 4740 4741 intel_dp_set_edid(intel_dp); 4742 if (intel_dp_is_edp(intel_dp) || 4743 to_intel_connector(connector)->detect_edid) 4744 status = connector_status_connected; 4745 4746 intel_dp_check_device_service_irq(intel_dp); 4747 4748 out: 4749 if (status != connector_status_connected && !intel_dp->is_mst) 4750 intel_dp_unset_edid(intel_dp); 4751 4752 /* 4753 * Make sure the refs for power wells enabled during detect are 4754 * dropped to avoid a new detect cycle triggered by HPD polling. 4755 */ 4756 intel_display_power_flush_work(dev_priv); 4757 4758 if (!intel_dp_is_edp(intel_dp)) 4759 drm_dp_set_subconnector_property(connector, 4760 status, 4761 intel_dp->dpcd, 4762 intel_dp->downstream_ports); 4763 return status; 4764 } 4765 4766 static void 4767 intel_dp_force(struct drm_connector *connector) 4768 { 4769 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4770 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4771 struct intel_encoder *intel_encoder = &dig_port->base; 4772 struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); 4773 enum intel_display_power_domain aux_domain = 4774 intel_aux_power_domain(dig_port); 4775 intel_wakeref_t wakeref; 4776 4777 drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", 4778 connector->base.id, connector->name); 4779 intel_dp_unset_edid(intel_dp); 4780 4781 if (connector->status != connector_status_connected) 4782 return; 4783 4784 wakeref = intel_display_power_get(dev_priv, aux_domain); 4785 4786 intel_dp_set_edid(intel_dp); 4787 4788 intel_display_power_put(dev_priv, aux_domain, wakeref); 4789 } 4790 4791 static int intel_dp_get_modes(struct drm_connector *connector) 4792 { 4793 struct intel_connector *intel_connector = to_intel_connector(connector); 4794 struct edid *edid; 4795 int num_modes = 0; 4796 4797 edid = intel_connector->detect_edid; 4798 if (edid) 4799 num_modes = intel_connector_update_modes(connector, edid); 4800 4801 /* Also add fixed mode, which may or may not be present in EDID */ 4802 if (intel_dp_is_edp(intel_attached_dp(intel_connector))) 4803 num_modes += intel_panel_get_modes(intel_connector); 4804 4805 if (num_modes) 4806 return num_modes; 4807 4808 if (!edid) { 4809 struct intel_dp *intel_dp = intel_attached_dp(intel_connector); 4810 struct drm_display_mode *mode; 4811 4812 mode = drm_dp_downstream_mode(connector->dev, 4813 intel_dp->dpcd, 4814 intel_dp->downstream_ports); 4815 if (mode) { 4816 drm_mode_probed_add(connector, mode); 4817 num_modes++; 4818 } 4819 } 4820 4821 return num_modes; 4822 } 4823 4824 static int 4825 intel_dp_connector_register(struct drm_connector *connector) 4826 { 4827 struct drm_i915_private *i915 = to_i915(connector->dev); 4828 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4829 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4830 struct intel_lspcon *lspcon = &dig_port->lspcon; 4831 int ret; 4832 4833 ret = intel_connector_register(connector); 4834 if (ret) 4835 return ret; 4836 4837 drm_dbg_kms(&i915->drm, "registering %s bus for %s\n", 4838 intel_dp->aux.name, connector->kdev->kobj.name); 4839 4840 intel_dp->aux.dev = connector->kdev; 4841 ret = drm_dp_aux_register(&intel_dp->aux); 4842 if (!ret) 4843 drm_dp_cec_register_connector(&intel_dp->aux, connector); 4844 4845 if (!intel_bios_is_lspcon_present(i915, dig_port->base.port)) 4846 return ret; 4847 4848 /* 4849 * ToDo: Clean this up to handle lspcon init and resume more 4850 * efficiently and streamlined. 4851 */ 4852 if (lspcon_init(dig_port)) { 4853 lspcon_detect_hdr_capability(lspcon); 4854 if (lspcon->hdr_supported) 4855 drm_connector_attach_hdr_output_metadata_property(connector); 4856 } 4857 4858 return ret; 4859 } 4860 4861 static void 4862 intel_dp_connector_unregister(struct drm_connector *connector) 4863 { 4864 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4865 4866 drm_dp_cec_unregister_connector(&intel_dp->aux); 4867 drm_dp_aux_unregister(&intel_dp->aux); 4868 intel_connector_unregister(connector); 4869 } 4870 4871 void intel_dp_encoder_flush_work(struct drm_encoder *encoder) 4872 { 4873 struct intel_digital_port *dig_port = enc_to_dig_port(to_intel_encoder(encoder)); 4874 struct intel_dp *intel_dp = &dig_port->dp; 4875 4876 intel_dp_mst_encoder_cleanup(dig_port); 4877 4878 intel_pps_vdd_off_sync(intel_dp); 4879 4880 /* 4881 * Ensure power off delay is respected on module remove, so that we can 4882 * reduce delays at driver probe. See pps_init_timestamps(). 4883 */ 4884 intel_pps_wait_power_cycle(intel_dp); 4885 4886 intel_dp_aux_fini(intel_dp); 4887 } 4888 4889 void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) 4890 { 4891 struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); 4892 4893 intel_pps_vdd_off_sync(intel_dp); 4894 } 4895 4896 void intel_dp_encoder_shutdown(struct intel_encoder *intel_encoder) 4897 { 4898 struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); 4899 4900 intel_pps_wait_power_cycle(intel_dp); 4901 } 4902 4903 static int intel_modeset_tile_group(struct intel_atomic_state *state, 4904 int tile_group_id) 4905 { 4906 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 4907 struct drm_connector_list_iter conn_iter; 4908 struct drm_connector *connector; 4909 int ret = 0; 4910 4911 drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); 4912 drm_for_each_connector_iter(connector, &conn_iter) { 4913 struct drm_connector_state *conn_state; 4914 struct intel_crtc_state *crtc_state; 4915 struct intel_crtc *crtc; 4916 4917 if (!connector->has_tile || 4918 connector->tile_group->id != tile_group_id) 4919 continue; 4920 4921 conn_state = drm_atomic_get_connector_state(&state->base, 4922 connector); 4923 if (IS_ERR(conn_state)) { 4924 ret = PTR_ERR(conn_state); 4925 break; 4926 } 4927 4928 crtc = to_intel_crtc(conn_state->crtc); 4929 4930 if (!crtc) 4931 continue; 4932 4933 crtc_state = intel_atomic_get_new_crtc_state(state, crtc); 4934 crtc_state->uapi.mode_changed = true; 4935 4936 ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); 4937 if (ret) 4938 break; 4939 } 4940 drm_connector_list_iter_end(&conn_iter); 4941 4942 return ret; 4943 } 4944 4945 static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders) 4946 { 4947 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 4948 struct intel_crtc *crtc; 4949 4950 if (transcoders == 0) 4951 return 0; 4952 4953 for_each_intel_crtc(&dev_priv->drm, crtc) { 4954 struct intel_crtc_state *crtc_state; 4955 int ret; 4956 4957 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); 4958 if (IS_ERR(crtc_state)) 4959 return PTR_ERR(crtc_state); 4960 4961 if (!crtc_state->hw.enable) 4962 continue; 4963 4964 if (!(transcoders & BIT(crtc_state->cpu_transcoder))) 4965 continue; 4966 4967 crtc_state->uapi.mode_changed = true; 4968 4969 ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base); 4970 if (ret) 4971 return ret; 4972 4973 ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); 4974 if (ret) 4975 return ret; 4976 4977 transcoders &= ~BIT(crtc_state->cpu_transcoder); 4978 } 4979 4980 drm_WARN_ON(&dev_priv->drm, transcoders != 0); 4981 4982 return 0; 4983 } 4984 4985 static int intel_modeset_synced_crtcs(struct intel_atomic_state *state, 4986 struct drm_connector *connector) 4987 { 4988 const struct drm_connector_state *old_conn_state = 4989 drm_atomic_get_old_connector_state(&state->base, connector); 4990 const struct intel_crtc_state *old_crtc_state; 4991 struct intel_crtc *crtc; 4992 u8 transcoders; 4993 4994 crtc = to_intel_crtc(old_conn_state->crtc); 4995 if (!crtc) 4996 return 0; 4997 4998 old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc); 4999 5000 if (!old_crtc_state->hw.active) 5001 return 0; 5002 5003 transcoders = old_crtc_state->sync_mode_slaves_mask; 5004 if (old_crtc_state->master_transcoder != INVALID_TRANSCODER) 5005 transcoders |= BIT(old_crtc_state->master_transcoder); 5006 5007 return intel_modeset_affected_transcoders(state, 5008 transcoders); 5009 } 5010 5011 static int intel_dp_connector_atomic_check(struct drm_connector *conn, 5012 struct drm_atomic_state *_state) 5013 { 5014 struct drm_i915_private *dev_priv = to_i915(conn->dev); 5015 struct intel_atomic_state *state = to_intel_atomic_state(_state); 5016 struct drm_connector_state *conn_state = drm_atomic_get_new_connector_state(_state, conn); 5017 struct intel_connector *intel_conn = to_intel_connector(conn); 5018 struct intel_dp *intel_dp = enc_to_intel_dp(intel_conn->encoder); 5019 int ret; 5020 5021 ret = intel_digital_connector_atomic_check(conn, &state->base); 5022 if (ret) 5023 return ret; 5024 5025 if (intel_dp_mst_source_support(intel_dp)) { 5026 ret = drm_dp_mst_root_conn_atomic_check(conn_state, &intel_dp->mst_mgr); 5027 if (ret) 5028 return ret; 5029 } 5030 5031 /* 5032 * We don't enable port sync on BDW due to missing w/as and 5033 * due to not having adjusted the modeset sequence appropriately. 5034 */ 5035 if (DISPLAY_VER(dev_priv) < 9) 5036 return 0; 5037 5038 if (!intel_connector_needs_modeset(state, conn)) 5039 return 0; 5040 5041 if (conn->has_tile) { 5042 ret = intel_modeset_tile_group(state, conn->tile_group->id); 5043 if (ret) 5044 return ret; 5045 } 5046 5047 return intel_modeset_synced_crtcs(state, conn); 5048 } 5049 5050 static void intel_dp_oob_hotplug_event(struct drm_connector *connector) 5051 { 5052 struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector)); 5053 struct drm_i915_private *i915 = to_i915(connector->dev); 5054 5055 spin_lock_irq(&i915->irq_lock); 5056 i915->display.hotplug.event_bits |= BIT(encoder->hpd_pin); 5057 spin_unlock_irq(&i915->irq_lock); 5058 queue_delayed_work(system_wq, &i915->display.hotplug.hotplug_work, 0); 5059 } 5060 5061 static const struct drm_connector_funcs intel_dp_connector_funcs = { 5062 .force = intel_dp_force, 5063 .fill_modes = drm_helper_probe_single_connector_modes, 5064 .atomic_get_property = intel_digital_connector_atomic_get_property, 5065 .atomic_set_property = intel_digital_connector_atomic_set_property, 5066 .late_register = intel_dp_connector_register, 5067 .early_unregister = intel_dp_connector_unregister, 5068 .destroy = intel_connector_destroy, 5069 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, 5070 .atomic_duplicate_state = intel_digital_connector_duplicate_state, 5071 .oob_hotplug_event = intel_dp_oob_hotplug_event, 5072 }; 5073 5074 static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { 5075 .detect_ctx = intel_dp_detect, 5076 .get_modes = intel_dp_get_modes, 5077 .mode_valid = intel_dp_mode_valid, 5078 .atomic_check = intel_dp_connector_atomic_check, 5079 }; 5080 5081 enum irqreturn 5082 intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd) 5083 { 5084 struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); 5085 struct intel_dp *intel_dp = &dig_port->dp; 5086 5087 if (dig_port->base.type == INTEL_OUTPUT_EDP && 5088 (long_hpd || !intel_pps_have_panel_power_or_vdd(intel_dp))) { 5089 /* 5090 * vdd off can generate a long/short pulse on eDP which 5091 * would require vdd on to handle it, and thus we 5092 * would end up in an endless cycle of 5093 * "vdd off -> long/short hpd -> vdd on -> detect -> vdd off -> ..." 5094 */ 5095 drm_dbg_kms(&i915->drm, 5096 "ignoring %s hpd on eDP [ENCODER:%d:%s]\n", 5097 long_hpd ? "long" : "short", 5098 dig_port->base.base.base.id, 5099 dig_port->base.base.name); 5100 return IRQ_HANDLED; 5101 } 5102 5103 drm_dbg_kms(&i915->drm, "got hpd irq on [ENCODER:%d:%s] - %s\n", 5104 dig_port->base.base.base.id, 5105 dig_port->base.base.name, 5106 long_hpd ? "long" : "short"); 5107 5108 if (long_hpd) { 5109 intel_dp->reset_link_params = true; 5110 return IRQ_NONE; 5111 } 5112 5113 if (intel_dp->is_mst) { 5114 if (!intel_dp_check_mst_status(intel_dp)) 5115 return IRQ_NONE; 5116 } else if (!intel_dp_short_pulse(intel_dp)) { 5117 return IRQ_NONE; 5118 } 5119 5120 return IRQ_HANDLED; 5121 } 5122 5123 /* check the VBT to see whether the eDP is on another port */ 5124 bool intel_dp_is_port_edp(struct drm_i915_private *dev_priv, enum port port) 5125 { 5126 /* 5127 * eDP not supported on g4x. so bail out early just 5128 * for a bit extra safety in case the VBT is bonkers. 5129 */ 5130 if (DISPLAY_VER(dev_priv) < 5) 5131 return false; 5132 5133 if (DISPLAY_VER(dev_priv) < 9 && port == PORT_A) 5134 return true; 5135 5136 return intel_bios_is_port_edp(dev_priv, port); 5137 } 5138 5139 static bool 5140 has_gamut_metadata_dip(struct drm_i915_private *i915, enum port port) 5141 { 5142 if (intel_bios_is_lspcon_present(i915, port)) 5143 return false; 5144 5145 if (DISPLAY_VER(i915) >= 11) 5146 return true; 5147 5148 if (port == PORT_A) 5149 return false; 5150 5151 if (IS_HASWELL(i915) || IS_BROADWELL(i915) || 5152 DISPLAY_VER(i915) >= 9) 5153 return true; 5154 5155 return false; 5156 } 5157 5158 static void 5159 intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) 5160 { 5161 struct drm_i915_private *dev_priv = to_i915(connector->dev); 5162 enum port port = dp_to_dig_port(intel_dp)->base.port; 5163 5164 if (!intel_dp_is_edp(intel_dp)) 5165 drm_connector_attach_dp_subconnector_property(connector); 5166 5167 if (!IS_G4X(dev_priv) && port != PORT_A) 5168 intel_attach_force_audio_property(connector); 5169 5170 intel_attach_broadcast_rgb_property(connector); 5171 if (HAS_GMCH(dev_priv)) 5172 drm_connector_attach_max_bpc_property(connector, 6, 10); 5173 else if (DISPLAY_VER(dev_priv) >= 5) 5174 drm_connector_attach_max_bpc_property(connector, 6, 12); 5175 5176 /* Register HDMI colorspace for case of lspcon */ 5177 if (intel_bios_is_lspcon_present(dev_priv, port)) { 5178 drm_connector_attach_content_type_property(connector); 5179 intel_attach_hdmi_colorspace_property(connector); 5180 } else { 5181 intel_attach_dp_colorspace_property(connector); 5182 } 5183 5184 if (has_gamut_metadata_dip(dev_priv, port)) 5185 drm_connector_attach_hdr_output_metadata_property(connector); 5186 5187 if (HAS_VRR(dev_priv)) 5188 drm_connector_attach_vrr_capable_property(connector); 5189 } 5190 5191 static void 5192 intel_edp_add_properties(struct intel_dp *intel_dp) 5193 { 5194 struct intel_connector *connector = intel_dp->attached_connector; 5195 struct drm_i915_private *i915 = to_i915(connector->base.dev); 5196 const struct drm_display_mode *fixed_mode = 5197 intel_panel_preferred_fixed_mode(connector); 5198 5199 intel_attach_scaling_mode_property(&connector->base); 5200 5201 drm_connector_set_panel_orientation_with_quirk(&connector->base, 5202 i915->display.vbt.orientation, 5203 fixed_mode->hdisplay, 5204 fixed_mode->vdisplay); 5205 } 5206 5207 static void intel_edp_backlight_setup(struct intel_dp *intel_dp, 5208 struct intel_connector *connector) 5209 { 5210 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 5211 enum pipe pipe = INVALID_PIPE; 5212 5213 if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) { 5214 /* 5215 * Figure out the current pipe for the initial backlight setup. 5216 * If the current pipe isn't valid, try the PPS pipe, and if that 5217 * fails just assume pipe A. 5218 */ 5219 pipe = vlv_active_pipe(intel_dp); 5220 5221 if (pipe != PIPE_A && pipe != PIPE_B) 5222 pipe = intel_dp->pps.pps_pipe; 5223 5224 if (pipe != PIPE_A && pipe != PIPE_B) 5225 pipe = PIPE_A; 5226 5227 drm_dbg_kms(&i915->drm, 5228 "[CONNECTOR:%d:%s] using pipe %c for initial backlight setup\n", 5229 connector->base.base.id, connector->base.name, 5230 pipe_name(pipe)); 5231 } 5232 5233 intel_backlight_setup(connector, pipe); 5234 } 5235 5236 static bool intel_edp_init_connector(struct intel_dp *intel_dp, 5237 struct intel_connector *intel_connector) 5238 { 5239 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 5240 struct drm_connector *connector = &intel_connector->base; 5241 struct drm_display_mode *fixed_mode; 5242 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 5243 bool has_dpcd; 5244 struct edid *edid; 5245 5246 if (!intel_dp_is_edp(intel_dp)) 5247 return true; 5248 5249 /* 5250 * On IBX/CPT we may get here with LVDS already registered. Since the 5251 * driver uses the only internal power sequencer available for both 5252 * eDP and LVDS bail out early in this case to prevent interfering 5253 * with an already powered-on LVDS power sequencer. 5254 */ 5255 if (intel_get_lvds_encoder(dev_priv)) { 5256 drm_WARN_ON(&dev_priv->drm, 5257 !(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))); 5258 drm_info(&dev_priv->drm, 5259 "LVDS was detected, not registering eDP\n"); 5260 5261 return false; 5262 } 5263 5264 intel_pps_init(intel_dp); 5265 5266 /* Cache DPCD and EDID for edp. */ 5267 has_dpcd = intel_edp_init_dpcd(intel_dp); 5268 5269 if (!has_dpcd) { 5270 /* if this fails, presume the device is a ghost */ 5271 drm_info(&dev_priv->drm, 5272 "[ENCODER:%d:%s] failed to retrieve link info, disabling eDP\n", 5273 encoder->base.base.id, encoder->base.name); 5274 goto out_vdd_off; 5275 } 5276 5277 mutex_lock(&dev_priv->drm.mode_config.mutex); 5278 edid = drm_get_edid(connector, &intel_dp->aux.ddc); 5279 if (!edid) { 5280 /* Fallback to EDID from ACPI OpRegion, if any */ 5281 edid = intel_opregion_get_edid(intel_connector); 5282 if (edid) 5283 drm_dbg_kms(&dev_priv->drm, 5284 "[CONNECTOR:%d:%s] Using OpRegion EDID\n", 5285 connector->base.id, connector->name); 5286 } 5287 if (edid) { 5288 if (drm_add_edid_modes(connector, edid)) { 5289 drm_connector_update_edid_property(connector, edid); 5290 } else { 5291 kfree(edid); 5292 edid = ERR_PTR(-EINVAL); 5293 } 5294 } else { 5295 edid = ERR_PTR(-ENOENT); 5296 } 5297 intel_connector->edid = edid; 5298 5299 intel_bios_init_panel(dev_priv, &intel_connector->panel, 5300 encoder->devdata, IS_ERR(edid) ? NULL : edid); 5301 5302 intel_panel_add_edid_fixed_modes(intel_connector, true); 5303 5304 /* MSO requires information from the EDID */ 5305 intel_edp_mso_init(intel_dp); 5306 5307 /* multiply the mode clock and horizontal timings for MSO */ 5308 list_for_each_entry(fixed_mode, &intel_connector->panel.fixed_modes, head) 5309 intel_edp_mso_mode_fixup(intel_connector, fixed_mode); 5310 5311 /* fallback to VBT if available for eDP */ 5312 if (!intel_panel_preferred_fixed_mode(intel_connector)) 5313 intel_panel_add_vbt_lfp_fixed_mode(intel_connector); 5314 5315 mutex_unlock(&dev_priv->drm.mode_config.mutex); 5316 5317 if (!intel_panel_preferred_fixed_mode(intel_connector)) { 5318 drm_info(&dev_priv->drm, 5319 "[ENCODER:%d:%s] failed to find fixed mode for the panel, disabling eDP\n", 5320 encoder->base.base.id, encoder->base.name); 5321 goto out_vdd_off; 5322 } 5323 5324 intel_panel_init(intel_connector); 5325 5326 intel_edp_backlight_setup(intel_dp, intel_connector); 5327 5328 intel_edp_add_properties(intel_dp); 5329 5330 intel_pps_init_late(intel_dp); 5331 5332 return true; 5333 5334 out_vdd_off: 5335 intel_pps_vdd_off_sync(intel_dp); 5336 5337 return false; 5338 } 5339 5340 static void intel_dp_modeset_retry_work_fn(struct work_struct *work) 5341 { 5342 struct intel_connector *intel_connector; 5343 struct drm_connector *connector; 5344 5345 intel_connector = container_of(work, typeof(*intel_connector), 5346 modeset_retry_work); 5347 connector = &intel_connector->base; 5348 drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s]\n", connector->base.id, 5349 connector->name); 5350 5351 /* Grab the locks before changing connector property*/ 5352 mutex_lock(&connector->dev->mode_config.mutex); 5353 /* Set connector link status to BAD and send a Uevent to notify 5354 * userspace to do a modeset. 5355 */ 5356 drm_connector_set_link_status_property(connector, 5357 DRM_MODE_LINK_STATUS_BAD); 5358 mutex_unlock(&connector->dev->mode_config.mutex); 5359 /* Send Hotplug uevent so userspace can reprobe */ 5360 drm_kms_helper_connector_hotplug_event(connector); 5361 } 5362 5363 bool 5364 intel_dp_init_connector(struct intel_digital_port *dig_port, 5365 struct intel_connector *intel_connector) 5366 { 5367 struct drm_connector *connector = &intel_connector->base; 5368 struct intel_dp *intel_dp = &dig_port->dp; 5369 struct intel_encoder *intel_encoder = &dig_port->base; 5370 struct drm_device *dev = intel_encoder->base.dev; 5371 struct drm_i915_private *dev_priv = to_i915(dev); 5372 enum port port = intel_encoder->port; 5373 enum phy phy = intel_port_to_phy(dev_priv, port); 5374 int type; 5375 5376 /* Initialize the work for modeset in case of link train failure */ 5377 INIT_WORK(&intel_connector->modeset_retry_work, 5378 intel_dp_modeset_retry_work_fn); 5379 5380 if (drm_WARN(dev, dig_port->max_lanes < 1, 5381 "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n", 5382 dig_port->max_lanes, intel_encoder->base.base.id, 5383 intel_encoder->base.name)) 5384 return false; 5385 5386 intel_dp->reset_link_params = true; 5387 intel_dp->pps.pps_pipe = INVALID_PIPE; 5388 intel_dp->pps.active_pipe = INVALID_PIPE; 5389 5390 /* Preserve the current hw state. */ 5391 intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg); 5392 intel_dp->attached_connector = intel_connector; 5393 5394 if (intel_dp_is_port_edp(dev_priv, port)) { 5395 /* 5396 * Currently we don't support eDP on TypeC ports, although in 5397 * theory it could work on TypeC legacy ports. 5398 */ 5399 drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy)); 5400 type = DRM_MODE_CONNECTOR_eDP; 5401 intel_encoder->type = INTEL_OUTPUT_EDP; 5402 5403 /* eDP only on port B and/or C on vlv/chv */ 5404 if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) || 5405 IS_CHERRYVIEW(dev_priv)) && 5406 port != PORT_B && port != PORT_C)) 5407 return false; 5408 } else { 5409 type = DRM_MODE_CONNECTOR_DisplayPort; 5410 } 5411 5412 intel_dp_set_default_sink_rates(intel_dp); 5413 intel_dp_set_default_max_sink_lane_count(intel_dp); 5414 5415 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) 5416 intel_dp->pps.active_pipe = vlv_active_pipe(intel_dp); 5417 5418 drm_dbg_kms(&dev_priv->drm, 5419 "Adding %s connector on [ENCODER:%d:%s]\n", 5420 type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", 5421 intel_encoder->base.base.id, intel_encoder->base.name); 5422 5423 drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); 5424 drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); 5425 5426 if (!HAS_GMCH(dev_priv)) 5427 connector->interlace_allowed = true; 5428 5429 intel_connector->polled = DRM_CONNECTOR_POLL_HPD; 5430 5431 intel_dp_aux_init(intel_dp); 5432 5433 intel_connector_attach_encoder(intel_connector, intel_encoder); 5434 5435 if (HAS_DDI(dev_priv)) 5436 intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; 5437 else 5438 intel_connector->get_hw_state = intel_connector_get_hw_state; 5439 5440 if (!intel_edp_init_connector(intel_dp, intel_connector)) { 5441 intel_dp_aux_fini(intel_dp); 5442 goto fail; 5443 } 5444 5445 intel_dp_set_source_rates(intel_dp); 5446 intel_dp_set_common_rates(intel_dp); 5447 intel_dp_reset_max_link_params(intel_dp); 5448 5449 /* init MST on ports that can support it */ 5450 intel_dp_mst_encoder_init(dig_port, 5451 intel_connector->base.base.id); 5452 5453 intel_dp_add_properties(intel_dp, connector); 5454 5455 if (is_hdcp_supported(dev_priv, port) && !intel_dp_is_edp(intel_dp)) { 5456 int ret = intel_dp_hdcp_init(dig_port, intel_connector); 5457 if (ret) 5458 drm_dbg_kms(&dev_priv->drm, 5459 "HDCP init failed, skipping.\n"); 5460 } 5461 5462 /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written 5463 * 0xd. Failure to do so will result in spurious interrupts being 5464 * generated on the port when a cable is not attached. 5465 */ 5466 if (IS_G45(dev_priv)) { 5467 u32 temp = intel_de_read(dev_priv, PEG_BAND_GAP_DATA); 5468 intel_de_write(dev_priv, PEG_BAND_GAP_DATA, 5469 (temp & ~0xf) | 0xd); 5470 } 5471 5472 intel_dp->frl.is_trained = false; 5473 intel_dp->frl.trained_rate_gbps = 0; 5474 5475 intel_psr_init(intel_dp); 5476 5477 return true; 5478 5479 fail: 5480 drm_connector_cleanup(connector); 5481 5482 return false; 5483 } 5484 5485 void intel_dp_mst_suspend(struct drm_i915_private *dev_priv) 5486 { 5487 struct intel_encoder *encoder; 5488 5489 if (!HAS_DISPLAY(dev_priv)) 5490 return; 5491 5492 for_each_intel_encoder(&dev_priv->drm, encoder) { 5493 struct intel_dp *intel_dp; 5494 5495 if (encoder->type != INTEL_OUTPUT_DDI) 5496 continue; 5497 5498 intel_dp = enc_to_intel_dp(encoder); 5499 5500 if (!intel_dp_mst_source_support(intel_dp)) 5501 continue; 5502 5503 if (intel_dp->is_mst) 5504 drm_dp_mst_topology_mgr_suspend(&intel_dp->mst_mgr); 5505 } 5506 } 5507 5508 void intel_dp_mst_resume(struct drm_i915_private *dev_priv) 5509 { 5510 struct intel_encoder *encoder; 5511 5512 if (!HAS_DISPLAY(dev_priv)) 5513 return; 5514 5515 for_each_intel_encoder(&dev_priv->drm, encoder) { 5516 struct intel_dp *intel_dp; 5517 int ret; 5518 5519 if (encoder->type != INTEL_OUTPUT_DDI) 5520 continue; 5521 5522 intel_dp = enc_to_intel_dp(encoder); 5523 5524 if (!intel_dp_mst_source_support(intel_dp)) 5525 continue; 5526 5527 ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr, 5528 true); 5529 if (ret) { 5530 intel_dp->is_mst = false; 5531 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, 5532 false); 5533 } 5534 } 5535 } 5536