1 /* 2 * Copyright © 2008 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 21 * IN THE SOFTWARE. 22 * 23 * Authors: 24 * Keith Packard <keithp@keithp.com> 25 * 26 */ 27 28 #include <linux/export.h> 29 #include <linux/i2c.h> 30 #include <linux/notifier.h> 31 #include <linux/slab.h> 32 #include <linux/string_helpers.h> 33 #include <linux/timekeeping.h> 34 #include <linux/types.h> 35 36 #include <asm/byteorder.h> 37 38 #include <drm/display/drm_dp_helper.h> 39 #include <drm/display/drm_dsc_helper.h> 40 #include <drm/display/drm_hdmi_helper.h> 41 #include <drm/drm_atomic_helper.h> 42 #include <drm/drm_crtc.h> 43 #include <drm/drm_edid.h> 44 #include <drm/drm_probe_helper.h> 45 46 #include "g4x_dp.h" 47 #include "i915_debugfs.h" 48 #include "i915_drv.h" 49 #include "intel_atomic.h" 50 #include "intel_audio.h" 51 #include "intel_backlight.h" 52 #include "intel_combo_phy_regs.h" 53 #include "intel_connector.h" 54 #include "intel_crtc.h" 55 #include "intel_ddi.h" 56 #include "intel_de.h" 57 #include "intel_display_types.h" 58 #include "intel_dp.h" 59 #include "intel_dp_aux.h" 60 #include "intel_dp_hdcp.h" 61 #include "intel_dp_link_training.h" 62 #include "intel_dp_mst.h" 63 #include "intel_dpio_phy.h" 64 #include "intel_dpll.h" 65 #include "intel_fifo_underrun.h" 66 #include "intel_hdcp.h" 67 #include "intel_hdmi.h" 68 #include "intel_hotplug.h" 69 #include "intel_lspcon.h" 70 #include "intel_lvds.h" 71 #include "intel_panel.h" 72 #include "intel_pch_display.h" 73 #include "intel_pps.h" 74 #include "intel_psr.h" 75 #include "intel_tc.h" 76 #include "intel_vdsc.h" 77 #include "intel_vrr.h" 78 79 /* DP DSC throughput values used for slice count calculations KPixels/s */ 80 #define DP_DSC_PEAK_PIXEL_RATE 2720000 81 #define DP_DSC_MAX_ENC_THROUGHPUT_0 340000 82 #define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 83 84 /* DP DSC FEC Overhead factor = 1/(0.972261) */ 85 #define DP_DSC_FEC_OVERHEAD_FACTOR 972261 86 87 /* Compliance test status bits */ 88 #define INTEL_DP_RESOLUTION_SHIFT_MASK 0 89 #define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK) 90 #define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK) 91 #define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK) 92 93 94 /* Constants for DP DSC configurations */ 95 static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15}; 96 97 /* With Single pipe configuration, HW is capable of supporting maximum 98 * of 4 slices per line. 99 */ 100 static const u8 valid_dsc_slicecount[] = {1, 2, 4}; 101 102 /** 103 * intel_dp_is_edp - is the given port attached to an eDP panel (either CPU or PCH) 104 * @intel_dp: DP struct 105 * 106 * If a CPU or PCH DP output is attached to an eDP panel, this function 107 * will return true, and false otherwise. 108 * 109 * This function is not safe to use prior to encoder type being set. 110 */ 111 bool intel_dp_is_edp(struct intel_dp *intel_dp) 112 { 113 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 114 115 return dig_port->base.type == INTEL_OUTPUT_EDP; 116 } 117 118 static void intel_dp_unset_edid(struct intel_dp *intel_dp); 119 static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc); 120 121 /* Is link rate UHBR and thus 128b/132b? */ 122 bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state) 123 { 124 return crtc_state->port_clock >= 1000000; 125 } 126 127 static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp) 128 { 129 intel_dp->sink_rates[0] = 162000; 130 intel_dp->num_sink_rates = 1; 131 } 132 133 /* update sink rates from dpcd */ 134 static void intel_dp_set_dpcd_sink_rates(struct intel_dp *intel_dp) 135 { 136 static const int dp_rates[] = { 137 162000, 270000, 540000, 810000 138 }; 139 int i, max_rate; 140 int max_lttpr_rate; 141 142 if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS)) { 143 /* Needed, e.g., for Apple MBP 2017, 15 inch eDP Retina panel */ 144 static const int quirk_rates[] = { 162000, 270000, 324000 }; 145 146 memcpy(intel_dp->sink_rates, quirk_rates, sizeof(quirk_rates)); 147 intel_dp->num_sink_rates = ARRAY_SIZE(quirk_rates); 148 149 return; 150 } 151 152 /* 153 * Sink rates for 8b/10b. 154 */ 155 max_rate = drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]); 156 max_lttpr_rate = drm_dp_lttpr_max_link_rate(intel_dp->lttpr_common_caps); 157 if (max_lttpr_rate) 158 max_rate = min(max_rate, max_lttpr_rate); 159 160 for (i = 0; i < ARRAY_SIZE(dp_rates); i++) { 161 if (dp_rates[i] > max_rate) 162 break; 163 intel_dp->sink_rates[i] = dp_rates[i]; 164 } 165 166 /* 167 * Sink rates for 128b/132b. If set, sink should support all 8b/10b 168 * rates and 10 Gbps. 169 */ 170 if (intel_dp->dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_128B132B) { 171 u8 uhbr_rates = 0; 172 173 BUILD_BUG_ON(ARRAY_SIZE(intel_dp->sink_rates) < ARRAY_SIZE(dp_rates) + 3); 174 175 drm_dp_dpcd_readb(&intel_dp->aux, 176 DP_128B132B_SUPPORTED_LINK_RATES, &uhbr_rates); 177 178 if (drm_dp_lttpr_count(intel_dp->lttpr_common_caps)) { 179 /* We have a repeater */ 180 if (intel_dp->lttpr_common_caps[0] >= 0x20 && 181 intel_dp->lttpr_common_caps[DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER - 182 DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] & 183 DP_PHY_REPEATER_128B132B_SUPPORTED) { 184 /* Repeater supports 128b/132b, valid UHBR rates */ 185 uhbr_rates &= intel_dp->lttpr_common_caps[DP_PHY_REPEATER_128B132B_RATES - 186 DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; 187 } else { 188 /* Does not support 128b/132b */ 189 uhbr_rates = 0; 190 } 191 } 192 193 if (uhbr_rates & DP_UHBR10) 194 intel_dp->sink_rates[i++] = 1000000; 195 if (uhbr_rates & DP_UHBR13_5) 196 intel_dp->sink_rates[i++] = 1350000; 197 if (uhbr_rates & DP_UHBR20) 198 intel_dp->sink_rates[i++] = 2000000; 199 } 200 201 intel_dp->num_sink_rates = i; 202 } 203 204 static void intel_dp_set_sink_rates(struct intel_dp *intel_dp) 205 { 206 struct intel_connector *connector = intel_dp->attached_connector; 207 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); 208 struct intel_encoder *encoder = &intel_dig_port->base; 209 210 intel_dp_set_dpcd_sink_rates(intel_dp); 211 212 if (intel_dp->num_sink_rates) 213 return; 214 215 drm_err(&dp_to_i915(intel_dp)->drm, 216 "[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD with no link rates, using defaults\n", 217 connector->base.base.id, connector->base.name, 218 encoder->base.base.id, encoder->base.name); 219 220 intel_dp_set_default_sink_rates(intel_dp); 221 } 222 223 static void intel_dp_set_default_max_sink_lane_count(struct intel_dp *intel_dp) 224 { 225 intel_dp->max_sink_lane_count = 1; 226 } 227 228 static void intel_dp_set_max_sink_lane_count(struct intel_dp *intel_dp) 229 { 230 struct intel_connector *connector = intel_dp->attached_connector; 231 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); 232 struct intel_encoder *encoder = &intel_dig_port->base; 233 234 intel_dp->max_sink_lane_count = drm_dp_max_lane_count(intel_dp->dpcd); 235 236 switch (intel_dp->max_sink_lane_count) { 237 case 1: 238 case 2: 239 case 4: 240 return; 241 } 242 243 drm_err(&dp_to_i915(intel_dp)->drm, 244 "[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD max lane count (%d), using default\n", 245 connector->base.base.id, connector->base.name, 246 encoder->base.base.id, encoder->base.name, 247 intel_dp->max_sink_lane_count); 248 249 intel_dp_set_default_max_sink_lane_count(intel_dp); 250 } 251 252 /* Get length of rates array potentially limited by max_rate. */ 253 static int intel_dp_rate_limit_len(const int *rates, int len, int max_rate) 254 { 255 int i; 256 257 /* Limit results by potentially reduced max rate */ 258 for (i = 0; i < len; i++) { 259 if (rates[len - i - 1] <= max_rate) 260 return len - i; 261 } 262 263 return 0; 264 } 265 266 /* Get length of common rates array potentially limited by max_rate. */ 267 static int intel_dp_common_len_rate_limit(const struct intel_dp *intel_dp, 268 int max_rate) 269 { 270 return intel_dp_rate_limit_len(intel_dp->common_rates, 271 intel_dp->num_common_rates, max_rate); 272 } 273 274 static int intel_dp_common_rate(struct intel_dp *intel_dp, int index) 275 { 276 if (drm_WARN_ON(&dp_to_i915(intel_dp)->drm, 277 index < 0 || index >= intel_dp->num_common_rates)) 278 return 162000; 279 280 return intel_dp->common_rates[index]; 281 } 282 283 /* Theoretical max between source and sink */ 284 static int intel_dp_max_common_rate(struct intel_dp *intel_dp) 285 { 286 return intel_dp_common_rate(intel_dp, intel_dp->num_common_rates - 1); 287 } 288 289 static int intel_dp_max_source_lane_count(struct intel_digital_port *dig_port) 290 { 291 int vbt_max_lanes = intel_bios_dp_max_lane_count(&dig_port->base); 292 int max_lanes = dig_port->max_lanes; 293 294 if (vbt_max_lanes) 295 max_lanes = min(max_lanes, vbt_max_lanes); 296 297 return max_lanes; 298 } 299 300 /* Theoretical max between source and sink */ 301 static int intel_dp_max_common_lane_count(struct intel_dp *intel_dp) 302 { 303 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 304 int source_max = intel_dp_max_source_lane_count(dig_port); 305 int sink_max = intel_dp->max_sink_lane_count; 306 int fia_max = intel_tc_port_fia_max_lane_count(dig_port); 307 int lttpr_max = drm_dp_lttpr_max_lane_count(intel_dp->lttpr_common_caps); 308 309 if (lttpr_max) 310 sink_max = min(sink_max, lttpr_max); 311 312 return min3(source_max, sink_max, fia_max); 313 } 314 315 int intel_dp_max_lane_count(struct intel_dp *intel_dp) 316 { 317 switch (intel_dp->max_link_lane_count) { 318 case 1: 319 case 2: 320 case 4: 321 return intel_dp->max_link_lane_count; 322 default: 323 MISSING_CASE(intel_dp->max_link_lane_count); 324 return 1; 325 } 326 } 327 328 /* 329 * The required data bandwidth for a mode with given pixel clock and bpp. This 330 * is the required net bandwidth independent of the data bandwidth efficiency. 331 */ 332 int 333 intel_dp_link_required(int pixel_clock, int bpp) 334 { 335 /* pixel_clock is in kHz, divide bpp by 8 for bit to Byte conversion */ 336 return DIV_ROUND_UP(pixel_clock * bpp, 8); 337 } 338 339 /* 340 * Given a link rate and lanes, get the data bandwidth. 341 * 342 * Data bandwidth is the actual payload rate, which depends on the data 343 * bandwidth efficiency and the link rate. 344 * 345 * For 8b/10b channel encoding, SST and non-FEC, the data bandwidth efficiency 346 * is 80%. For example, for a 1.62 Gbps link, 1.62*10^9 bps * 0.80 * (1/8) = 347 * 162000 kBps. With 8-bit symbols, we have 162000 kHz symbol clock. Just by 348 * coincidence, the port clock in kHz matches the data bandwidth in kBps, and 349 * they equal the link bit rate in Gbps multiplied by 100000. (Note that this no 350 * longer holds for data bandwidth as soon as FEC or MST is taken into account!) 351 * 352 * For 128b/132b channel encoding, the data bandwidth efficiency is 96.71%. For 353 * example, for a 10 Gbps link, 10*10^9 bps * 0.9671 * (1/8) = 1208875 354 * kBps. With 32-bit symbols, we have 312500 kHz symbol clock. The value 1000000 355 * does not match the symbol clock, the port clock (not even if you think in 356 * terms of a byte clock), nor the data bandwidth. It only matches the link bit 357 * rate in units of 10000 bps. 358 */ 359 int 360 intel_dp_max_data_rate(int max_link_rate, int max_lanes) 361 { 362 if (max_link_rate >= 1000000) { 363 /* 364 * UHBR rates always use 128b/132b channel encoding, and have 365 * 97.71% data bandwidth efficiency. Consider max_link_rate the 366 * link bit rate in units of 10000 bps. 367 */ 368 int max_link_rate_kbps = max_link_rate * 10; 369 370 max_link_rate_kbps = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(max_link_rate_kbps, 9671), 10000); 371 max_link_rate = max_link_rate_kbps / 8; 372 } 373 374 /* 375 * Lower than UHBR rates always use 8b/10b channel encoding, and have 376 * 80% data bandwidth efficiency for SST non-FEC. However, this turns 377 * out to be a nop by coincidence, and can be skipped: 378 * 379 * int max_link_rate_kbps = max_link_rate * 10; 380 * max_link_rate_kbps = DIV_ROUND_CLOSEST_ULL(max_link_rate_kbps * 8, 10); 381 * max_link_rate = max_link_rate_kbps / 8; 382 */ 383 384 return max_link_rate * max_lanes; 385 } 386 387 bool intel_dp_can_bigjoiner(struct intel_dp *intel_dp) 388 { 389 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); 390 struct intel_encoder *encoder = &intel_dig_port->base; 391 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 392 393 return DISPLAY_VER(dev_priv) >= 12 || 394 (DISPLAY_VER(dev_priv) == 11 && 395 encoder->port != PORT_A); 396 } 397 398 static int dg2_max_source_rate(struct intel_dp *intel_dp) 399 { 400 return intel_dp_is_edp(intel_dp) ? 810000 : 1350000; 401 } 402 403 static int icl_max_source_rate(struct intel_dp *intel_dp) 404 { 405 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 406 struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); 407 enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port); 408 409 if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp)) 410 return 540000; 411 412 return 810000; 413 } 414 415 static int ehl_max_source_rate(struct intel_dp *intel_dp) 416 { 417 if (intel_dp_is_edp(intel_dp)) 418 return 540000; 419 420 return 810000; 421 } 422 423 static int vbt_max_link_rate(struct intel_dp *intel_dp) 424 { 425 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 426 int max_rate; 427 428 max_rate = intel_bios_dp_max_link_rate(encoder); 429 430 if (intel_dp_is_edp(intel_dp)) { 431 struct intel_connector *connector = intel_dp->attached_connector; 432 int edp_max_rate = connector->panel.vbt.edp.max_link_rate; 433 434 if (max_rate && edp_max_rate) 435 max_rate = min(max_rate, edp_max_rate); 436 else if (edp_max_rate) 437 max_rate = edp_max_rate; 438 } 439 440 return max_rate; 441 } 442 443 static void 444 intel_dp_set_source_rates(struct intel_dp *intel_dp) 445 { 446 /* The values must be in increasing order */ 447 static const int icl_rates[] = { 448 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000, 449 1000000, 1350000, 450 }; 451 static const int bxt_rates[] = { 452 162000, 216000, 243000, 270000, 324000, 432000, 540000 453 }; 454 static const int skl_rates[] = { 455 162000, 216000, 270000, 324000, 432000, 540000 456 }; 457 static const int hsw_rates[] = { 458 162000, 270000, 540000 459 }; 460 static const int g4x_rates[] = { 461 162000, 270000 462 }; 463 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 464 struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); 465 const int *source_rates; 466 int size, max_rate = 0, vbt_max_rate; 467 468 /* This should only be done once */ 469 drm_WARN_ON(&dev_priv->drm, 470 intel_dp->source_rates || intel_dp->num_source_rates); 471 472 if (DISPLAY_VER(dev_priv) >= 11) { 473 source_rates = icl_rates; 474 size = ARRAY_SIZE(icl_rates); 475 if (IS_DG2(dev_priv)) 476 max_rate = dg2_max_source_rate(intel_dp); 477 else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) || 478 IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) 479 max_rate = 810000; 480 else if (IS_JSL_EHL(dev_priv)) 481 max_rate = ehl_max_source_rate(intel_dp); 482 else 483 max_rate = icl_max_source_rate(intel_dp); 484 } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { 485 source_rates = bxt_rates; 486 size = ARRAY_SIZE(bxt_rates); 487 } else if (DISPLAY_VER(dev_priv) == 9) { 488 source_rates = skl_rates; 489 size = ARRAY_SIZE(skl_rates); 490 } else if ((IS_HASWELL(dev_priv) && !IS_HSW_ULX(dev_priv)) || 491 IS_BROADWELL(dev_priv)) { 492 source_rates = hsw_rates; 493 size = ARRAY_SIZE(hsw_rates); 494 } else { 495 source_rates = g4x_rates; 496 size = ARRAY_SIZE(g4x_rates); 497 } 498 499 vbt_max_rate = vbt_max_link_rate(intel_dp); 500 if (max_rate && vbt_max_rate) 501 max_rate = min(max_rate, vbt_max_rate); 502 else if (vbt_max_rate) 503 max_rate = vbt_max_rate; 504 505 if (max_rate) 506 size = intel_dp_rate_limit_len(source_rates, size, max_rate); 507 508 intel_dp->source_rates = source_rates; 509 intel_dp->num_source_rates = size; 510 } 511 512 static int intersect_rates(const int *source_rates, int source_len, 513 const int *sink_rates, int sink_len, 514 int *common_rates) 515 { 516 int i = 0, j = 0, k = 0; 517 518 while (i < source_len && j < sink_len) { 519 if (source_rates[i] == sink_rates[j]) { 520 if (WARN_ON(k >= DP_MAX_SUPPORTED_RATES)) 521 return k; 522 common_rates[k] = source_rates[i]; 523 ++k; 524 ++i; 525 ++j; 526 } else if (source_rates[i] < sink_rates[j]) { 527 ++i; 528 } else { 529 ++j; 530 } 531 } 532 return k; 533 } 534 535 /* return index of rate in rates array, or -1 if not found */ 536 static int intel_dp_rate_index(const int *rates, int len, int rate) 537 { 538 int i; 539 540 for (i = 0; i < len; i++) 541 if (rate == rates[i]) 542 return i; 543 544 return -1; 545 } 546 547 static void intel_dp_set_common_rates(struct intel_dp *intel_dp) 548 { 549 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 550 551 drm_WARN_ON(&i915->drm, 552 !intel_dp->num_source_rates || !intel_dp->num_sink_rates); 553 554 intel_dp->num_common_rates = intersect_rates(intel_dp->source_rates, 555 intel_dp->num_source_rates, 556 intel_dp->sink_rates, 557 intel_dp->num_sink_rates, 558 intel_dp->common_rates); 559 560 /* Paranoia, there should always be something in common. */ 561 if (drm_WARN_ON(&i915->drm, intel_dp->num_common_rates == 0)) { 562 intel_dp->common_rates[0] = 162000; 563 intel_dp->num_common_rates = 1; 564 } 565 } 566 567 static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate, 568 u8 lane_count) 569 { 570 /* 571 * FIXME: we need to synchronize the current link parameters with 572 * hardware readout. Currently fast link training doesn't work on 573 * boot-up. 574 */ 575 if (link_rate == 0 || 576 link_rate > intel_dp->max_link_rate) 577 return false; 578 579 if (lane_count == 0 || 580 lane_count > intel_dp_max_lane_count(intel_dp)) 581 return false; 582 583 return true; 584 } 585 586 static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp, 587 int link_rate, 588 u8 lane_count) 589 { 590 /* FIXME figure out what we actually want here */ 591 const struct drm_display_mode *fixed_mode = 592 intel_panel_preferred_fixed_mode(intel_dp->attached_connector); 593 int mode_rate, max_rate; 594 595 mode_rate = intel_dp_link_required(fixed_mode->clock, 18); 596 max_rate = intel_dp_max_data_rate(link_rate, lane_count); 597 if (mode_rate > max_rate) 598 return false; 599 600 return true; 601 } 602 603 int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp, 604 int link_rate, u8 lane_count) 605 { 606 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 607 int index; 608 609 /* 610 * TODO: Enable fallback on MST links once MST link compute can handle 611 * the fallback params. 612 */ 613 if (intel_dp->is_mst) { 614 drm_err(&i915->drm, "Link Training Unsuccessful\n"); 615 return -1; 616 } 617 618 if (intel_dp_is_edp(intel_dp) && !intel_dp->use_max_params) { 619 drm_dbg_kms(&i915->drm, 620 "Retrying Link training for eDP with max parameters\n"); 621 intel_dp->use_max_params = true; 622 return 0; 623 } 624 625 index = intel_dp_rate_index(intel_dp->common_rates, 626 intel_dp->num_common_rates, 627 link_rate); 628 if (index > 0) { 629 if (intel_dp_is_edp(intel_dp) && 630 !intel_dp_can_link_train_fallback_for_edp(intel_dp, 631 intel_dp_common_rate(intel_dp, index - 1), 632 lane_count)) { 633 drm_dbg_kms(&i915->drm, 634 "Retrying Link training for eDP with same parameters\n"); 635 return 0; 636 } 637 intel_dp->max_link_rate = intel_dp_common_rate(intel_dp, index - 1); 638 intel_dp->max_link_lane_count = lane_count; 639 } else if (lane_count > 1) { 640 if (intel_dp_is_edp(intel_dp) && 641 !intel_dp_can_link_train_fallback_for_edp(intel_dp, 642 intel_dp_max_common_rate(intel_dp), 643 lane_count >> 1)) { 644 drm_dbg_kms(&i915->drm, 645 "Retrying Link training for eDP with same parameters\n"); 646 return 0; 647 } 648 intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp); 649 intel_dp->max_link_lane_count = lane_count >> 1; 650 } else { 651 drm_err(&i915->drm, "Link Training Unsuccessful\n"); 652 return -1; 653 } 654 655 return 0; 656 } 657 658 u32 intel_dp_mode_to_fec_clock(u32 mode_clock) 659 { 660 return div_u64(mul_u32_u32(mode_clock, 1000000U), 661 DP_DSC_FEC_OVERHEAD_FACTOR); 662 } 663 664 static int 665 small_joiner_ram_size_bits(struct drm_i915_private *i915) 666 { 667 if (DISPLAY_VER(i915) >= 13) 668 return 17280 * 8; 669 else if (DISPLAY_VER(i915) >= 11) 670 return 7680 * 8; 671 else 672 return 6144 * 8; 673 } 674 675 static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915, 676 u32 link_clock, u32 lane_count, 677 u32 mode_clock, u32 mode_hdisplay, 678 bool bigjoiner, 679 u32 pipe_bpp) 680 { 681 u32 bits_per_pixel, max_bpp_small_joiner_ram; 682 int i; 683 684 /* 685 * Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* 686 * (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) 687 * for SST -> TimeSlotsPerMTP is 1, 688 * for MST -> TimeSlotsPerMTP has to be calculated 689 */ 690 bits_per_pixel = (link_clock * lane_count * 8) / 691 intel_dp_mode_to_fec_clock(mode_clock); 692 693 /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ 694 max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) / 695 mode_hdisplay; 696 697 if (bigjoiner) 698 max_bpp_small_joiner_ram *= 2; 699 700 /* 701 * Greatest allowed DSC BPP = MIN (output BPP from available Link BW 702 * check, output bpp from small joiner RAM check) 703 */ 704 bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram); 705 706 if (bigjoiner) { 707 u32 max_bpp_bigjoiner = 708 i915->display.cdclk.max_cdclk_freq * 48 / 709 intel_dp_mode_to_fec_clock(mode_clock); 710 711 bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner); 712 } 713 714 /* Error out if the max bpp is less than smallest allowed valid bpp */ 715 if (bits_per_pixel < valid_dsc_bpp[0]) { 716 drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n", 717 bits_per_pixel, valid_dsc_bpp[0]); 718 return 0; 719 } 720 721 /* From XE_LPD onwards we support from bpc upto uncompressed bpp-1 BPPs */ 722 if (DISPLAY_VER(i915) >= 13) { 723 bits_per_pixel = min(bits_per_pixel, pipe_bpp - 1); 724 } else { 725 /* Find the nearest match in the array of known BPPs from VESA */ 726 for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) { 727 if (bits_per_pixel < valid_dsc_bpp[i + 1]) 728 break; 729 } 730 bits_per_pixel = valid_dsc_bpp[i]; 731 } 732 733 /* 734 * Compressed BPP in U6.4 format so multiply by 16, for Gen 11, 735 * fractional part is 0 736 */ 737 return bits_per_pixel << 4; 738 } 739 740 static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp, 741 int mode_clock, int mode_hdisplay, 742 bool bigjoiner) 743 { 744 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 745 u8 min_slice_count, i; 746 int max_slice_width; 747 748 if (mode_clock <= DP_DSC_PEAK_PIXEL_RATE) 749 min_slice_count = DIV_ROUND_UP(mode_clock, 750 DP_DSC_MAX_ENC_THROUGHPUT_0); 751 else 752 min_slice_count = DIV_ROUND_UP(mode_clock, 753 DP_DSC_MAX_ENC_THROUGHPUT_1); 754 755 max_slice_width = drm_dp_dsc_sink_max_slice_width(intel_dp->dsc_dpcd); 756 if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) { 757 drm_dbg_kms(&i915->drm, 758 "Unsupported slice width %d by DP DSC Sink device\n", 759 max_slice_width); 760 return 0; 761 } 762 /* Also take into account max slice width */ 763 min_slice_count = max_t(u8, min_slice_count, 764 DIV_ROUND_UP(mode_hdisplay, 765 max_slice_width)); 766 767 /* Find the closest match to the valid slice count values */ 768 for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) { 769 u8 test_slice_count = valid_dsc_slicecount[i] << bigjoiner; 770 771 if (test_slice_count > 772 drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false)) 773 break; 774 775 /* big joiner needs small joiner to be enabled */ 776 if (bigjoiner && test_slice_count < 4) 777 continue; 778 779 if (min_slice_count <= test_slice_count) 780 return test_slice_count; 781 } 782 783 drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n", 784 min_slice_count); 785 return 0; 786 } 787 788 static enum intel_output_format 789 intel_dp_output_format(struct intel_connector *connector, 790 bool ycbcr_420_output) 791 { 792 struct intel_dp *intel_dp = intel_attached_dp(connector); 793 794 if (!connector->base.ycbcr_420_allowed || !ycbcr_420_output) 795 return INTEL_OUTPUT_FORMAT_RGB; 796 797 if (intel_dp->dfp.rgb_to_ycbcr && 798 intel_dp->dfp.ycbcr_444_to_420) 799 return INTEL_OUTPUT_FORMAT_RGB; 800 801 if (intel_dp->dfp.ycbcr_444_to_420) 802 return INTEL_OUTPUT_FORMAT_YCBCR444; 803 else 804 return INTEL_OUTPUT_FORMAT_YCBCR420; 805 } 806 807 int intel_dp_min_bpp(enum intel_output_format output_format) 808 { 809 if (output_format == INTEL_OUTPUT_FORMAT_RGB) 810 return 6 * 3; 811 else 812 return 8 * 3; 813 } 814 815 static int intel_dp_output_bpp(enum intel_output_format output_format, int bpp) 816 { 817 /* 818 * bpp value was assumed to RGB format. And YCbCr 4:2:0 output 819 * format of the number of bytes per pixel will be half the number 820 * of bytes of RGB pixel. 821 */ 822 if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) 823 bpp /= 2; 824 825 return bpp; 826 } 827 828 static int 829 intel_dp_mode_min_output_bpp(struct intel_connector *connector, 830 const struct drm_display_mode *mode) 831 { 832 const struct drm_display_info *info = &connector->base.display_info; 833 enum intel_output_format output_format = 834 intel_dp_output_format(connector, drm_mode_is_420_only(info, mode)); 835 836 return intel_dp_output_bpp(output_format, intel_dp_min_bpp(output_format)); 837 } 838 839 static bool intel_dp_hdisplay_bad(struct drm_i915_private *dev_priv, 840 int hdisplay) 841 { 842 /* 843 * Older platforms don't like hdisplay==4096 with DP. 844 * 845 * On ILK/SNB/IVB the pipe seems to be somewhat running (scanline 846 * and frame counter increment), but we don't get vblank interrupts, 847 * and the pipe underruns immediately. The link also doesn't seem 848 * to get trained properly. 849 * 850 * On CHV the vblank interrupts don't seem to disappear but 851 * otherwise the symptoms are similar. 852 * 853 * TODO: confirm the behaviour on HSW+ 854 */ 855 return hdisplay == 4096 && !HAS_DDI(dev_priv); 856 } 857 858 static int intel_dp_max_tmds_clock(struct intel_dp *intel_dp) 859 { 860 struct intel_connector *connector = intel_dp->attached_connector; 861 const struct drm_display_info *info = &connector->base.display_info; 862 int max_tmds_clock = intel_dp->dfp.max_tmds_clock; 863 864 /* Only consider the sink's max TMDS clock if we know this is a HDMI DFP */ 865 if (max_tmds_clock && info->max_tmds_clock) 866 max_tmds_clock = min(max_tmds_clock, info->max_tmds_clock); 867 868 return max_tmds_clock; 869 } 870 871 static enum drm_mode_status 872 intel_dp_tmds_clock_valid(struct intel_dp *intel_dp, 873 int clock, int bpc, bool ycbcr420_output, 874 bool respect_downstream_limits) 875 { 876 int tmds_clock, min_tmds_clock, max_tmds_clock; 877 878 if (!respect_downstream_limits) 879 return MODE_OK; 880 881 tmds_clock = intel_hdmi_tmds_clock(clock, bpc, ycbcr420_output); 882 883 min_tmds_clock = intel_dp->dfp.min_tmds_clock; 884 max_tmds_clock = intel_dp_max_tmds_clock(intel_dp); 885 886 if (min_tmds_clock && tmds_clock < min_tmds_clock) 887 return MODE_CLOCK_LOW; 888 889 if (max_tmds_clock && tmds_clock > max_tmds_clock) 890 return MODE_CLOCK_HIGH; 891 892 return MODE_OK; 893 } 894 895 static enum drm_mode_status 896 intel_dp_mode_valid_downstream(struct intel_connector *connector, 897 const struct drm_display_mode *mode, 898 int target_clock) 899 { 900 struct intel_dp *intel_dp = intel_attached_dp(connector); 901 const struct drm_display_info *info = &connector->base.display_info; 902 enum drm_mode_status status; 903 bool ycbcr_420_only; 904 905 /* If PCON supports FRL MODE, check FRL bandwidth constraints */ 906 if (intel_dp->dfp.pcon_max_frl_bw) { 907 int target_bw; 908 int max_frl_bw; 909 int bpp = intel_dp_mode_min_output_bpp(connector, mode); 910 911 target_bw = bpp * target_clock; 912 913 max_frl_bw = intel_dp->dfp.pcon_max_frl_bw; 914 915 /* converting bw from Gbps to Kbps*/ 916 max_frl_bw = max_frl_bw * 1000000; 917 918 if (target_bw > max_frl_bw) 919 return MODE_CLOCK_HIGH; 920 921 return MODE_OK; 922 } 923 924 if (intel_dp->dfp.max_dotclock && 925 target_clock > intel_dp->dfp.max_dotclock) 926 return MODE_CLOCK_HIGH; 927 928 ycbcr_420_only = drm_mode_is_420_only(info, mode); 929 930 /* Assume 8bpc for the DP++/HDMI/DVI TMDS clock check */ 931 status = intel_dp_tmds_clock_valid(intel_dp, target_clock, 932 8, ycbcr_420_only, true); 933 934 if (status != MODE_OK) { 935 if (ycbcr_420_only || 936 !connector->base.ycbcr_420_allowed || 937 !drm_mode_is_420_also(info, mode)) 938 return status; 939 940 status = intel_dp_tmds_clock_valid(intel_dp, target_clock, 941 8, true, true); 942 if (status != MODE_OK) 943 return status; 944 } 945 946 return MODE_OK; 947 } 948 949 static bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp, 950 int hdisplay, int clock) 951 { 952 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 953 954 if (!intel_dp_can_bigjoiner(intel_dp)) 955 return false; 956 957 return clock > i915->max_dotclk_freq || hdisplay > 5120; 958 } 959 960 static enum drm_mode_status 961 intel_dp_mode_valid(struct drm_connector *_connector, 962 struct drm_display_mode *mode) 963 { 964 struct intel_connector *connector = to_intel_connector(_connector); 965 struct intel_dp *intel_dp = intel_attached_dp(connector); 966 struct drm_i915_private *dev_priv = to_i915(connector->base.dev); 967 const struct drm_display_mode *fixed_mode; 968 int target_clock = mode->clock; 969 int max_rate, mode_rate, max_lanes, max_link_clock; 970 int max_dotclk = dev_priv->max_dotclk_freq; 971 u16 dsc_max_output_bpp = 0; 972 u8 dsc_slice_count = 0; 973 enum drm_mode_status status; 974 bool dsc = false, bigjoiner = false; 975 976 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) 977 return MODE_NO_DBLESCAN; 978 979 if (mode->flags & DRM_MODE_FLAG_DBLCLK) 980 return MODE_H_ILLEGAL; 981 982 fixed_mode = intel_panel_fixed_mode(connector, mode); 983 if (intel_dp_is_edp(intel_dp) && fixed_mode) { 984 status = intel_panel_mode_valid(connector, mode); 985 if (status != MODE_OK) 986 return status; 987 988 target_clock = fixed_mode->clock; 989 } 990 991 if (mode->clock < 10000) 992 return MODE_CLOCK_LOW; 993 994 if (intel_dp_need_bigjoiner(intel_dp, mode->hdisplay, target_clock)) { 995 bigjoiner = true; 996 max_dotclk *= 2; 997 } 998 if (target_clock > max_dotclk) 999 return MODE_CLOCK_HIGH; 1000 1001 max_link_clock = intel_dp_max_link_rate(intel_dp); 1002 max_lanes = intel_dp_max_lane_count(intel_dp); 1003 1004 max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); 1005 mode_rate = intel_dp_link_required(target_clock, 1006 intel_dp_mode_min_output_bpp(connector, mode)); 1007 1008 if (intel_dp_hdisplay_bad(dev_priv, mode->hdisplay)) 1009 return MODE_H_ILLEGAL; 1010 1011 /* 1012 * Output bpp is stored in 6.4 format so right shift by 4 to get the 1013 * integer value since we support only integer values of bpp. 1014 */ 1015 if (DISPLAY_VER(dev_priv) >= 10 && 1016 drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) { 1017 /* 1018 * TBD pass the connector BPC, 1019 * for now U8_MAX so that max BPC on that platform would be picked 1020 */ 1021 int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX); 1022 1023 if (intel_dp_is_edp(intel_dp)) { 1024 dsc_max_output_bpp = 1025 drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4; 1026 dsc_slice_count = 1027 drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, 1028 true); 1029 } else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) { 1030 dsc_max_output_bpp = 1031 intel_dp_dsc_get_output_bpp(dev_priv, 1032 max_link_clock, 1033 max_lanes, 1034 target_clock, 1035 mode->hdisplay, 1036 bigjoiner, 1037 pipe_bpp) >> 4; 1038 dsc_slice_count = 1039 intel_dp_dsc_get_slice_count(intel_dp, 1040 target_clock, 1041 mode->hdisplay, 1042 bigjoiner); 1043 } 1044 1045 dsc = dsc_max_output_bpp && dsc_slice_count; 1046 } 1047 1048 /* 1049 * Big joiner configuration needs DSC for TGL which is not true for 1050 * XE_LPD where uncompressed joiner is supported. 1051 */ 1052 if (DISPLAY_VER(dev_priv) < 13 && bigjoiner && !dsc) 1053 return MODE_CLOCK_HIGH; 1054 1055 if (mode_rate > max_rate && !dsc) 1056 return MODE_CLOCK_HIGH; 1057 1058 status = intel_dp_mode_valid_downstream(connector, mode, target_clock); 1059 if (status != MODE_OK) 1060 return status; 1061 1062 return intel_mode_valid_max_plane_size(dev_priv, mode, bigjoiner); 1063 } 1064 1065 bool intel_dp_source_supports_tps3(struct drm_i915_private *i915) 1066 { 1067 return DISPLAY_VER(i915) >= 9 || IS_BROADWELL(i915) || IS_HASWELL(i915); 1068 } 1069 1070 bool intel_dp_source_supports_tps4(struct drm_i915_private *i915) 1071 { 1072 return DISPLAY_VER(i915) >= 10; 1073 } 1074 1075 static void snprintf_int_array(char *str, size_t len, 1076 const int *array, int nelem) 1077 { 1078 int i; 1079 1080 str[0] = '\0'; 1081 1082 for (i = 0; i < nelem; i++) { 1083 int r = snprintf(str, len, "%s%d", i ? ", " : "", array[i]); 1084 if (r >= len) 1085 return; 1086 str += r; 1087 len -= r; 1088 } 1089 } 1090 1091 static void intel_dp_print_rates(struct intel_dp *intel_dp) 1092 { 1093 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1094 char str[128]; /* FIXME: too big for stack? */ 1095 1096 if (!drm_debug_enabled(DRM_UT_KMS)) 1097 return; 1098 1099 snprintf_int_array(str, sizeof(str), 1100 intel_dp->source_rates, intel_dp->num_source_rates); 1101 drm_dbg_kms(&i915->drm, "source rates: %s\n", str); 1102 1103 snprintf_int_array(str, sizeof(str), 1104 intel_dp->sink_rates, intel_dp->num_sink_rates); 1105 drm_dbg_kms(&i915->drm, "sink rates: %s\n", str); 1106 1107 snprintf_int_array(str, sizeof(str), 1108 intel_dp->common_rates, intel_dp->num_common_rates); 1109 drm_dbg_kms(&i915->drm, "common rates: %s\n", str); 1110 } 1111 1112 int 1113 intel_dp_max_link_rate(struct intel_dp *intel_dp) 1114 { 1115 int len; 1116 1117 len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->max_link_rate); 1118 1119 return intel_dp_common_rate(intel_dp, len - 1); 1120 } 1121 1122 int intel_dp_rate_select(struct intel_dp *intel_dp, int rate) 1123 { 1124 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1125 int i = intel_dp_rate_index(intel_dp->sink_rates, 1126 intel_dp->num_sink_rates, rate); 1127 1128 if (drm_WARN_ON(&i915->drm, i < 0)) 1129 i = 0; 1130 1131 return i; 1132 } 1133 1134 void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, 1135 u8 *link_bw, u8 *rate_select) 1136 { 1137 /* eDP 1.4 rate select method. */ 1138 if (intel_dp->use_rate_select) { 1139 *link_bw = 0; 1140 *rate_select = 1141 intel_dp_rate_select(intel_dp, port_clock); 1142 } else { 1143 *link_bw = drm_dp_link_rate_to_bw_code(port_clock); 1144 *rate_select = 0; 1145 } 1146 } 1147 1148 static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp, 1149 const struct intel_crtc_state *pipe_config) 1150 { 1151 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 1152 1153 /* On TGL, FEC is supported on all Pipes */ 1154 if (DISPLAY_VER(dev_priv) >= 12) 1155 return true; 1156 1157 if (DISPLAY_VER(dev_priv) == 11 && pipe_config->cpu_transcoder != TRANSCODER_A) 1158 return true; 1159 1160 return false; 1161 } 1162 1163 static bool intel_dp_supports_fec(struct intel_dp *intel_dp, 1164 const struct intel_crtc_state *pipe_config) 1165 { 1166 return intel_dp_source_supports_fec(intel_dp, pipe_config) && 1167 drm_dp_sink_supports_fec(intel_dp->fec_capable); 1168 } 1169 1170 static bool intel_dp_supports_dsc(struct intel_dp *intel_dp, 1171 const struct intel_crtc_state *crtc_state) 1172 { 1173 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP) && !crtc_state->fec_enable) 1174 return false; 1175 1176 return intel_dsc_source_support(crtc_state) && 1177 drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd); 1178 } 1179 1180 static bool intel_dp_is_ycbcr420(struct intel_dp *intel_dp, 1181 const struct intel_crtc_state *crtc_state) 1182 { 1183 return crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || 1184 (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 && 1185 intel_dp->dfp.ycbcr_444_to_420); 1186 } 1187 1188 static int intel_dp_hdmi_compute_bpc(struct intel_dp *intel_dp, 1189 const struct intel_crtc_state *crtc_state, 1190 int bpc, bool respect_downstream_limits) 1191 { 1192 bool ycbcr420_output = intel_dp_is_ycbcr420(intel_dp, crtc_state); 1193 int clock = crtc_state->hw.adjusted_mode.crtc_clock; 1194 1195 /* 1196 * Current bpc could already be below 8bpc due to 1197 * FDI bandwidth constraints or other limits. 1198 * HDMI minimum is 8bpc however. 1199 */ 1200 bpc = max(bpc, 8); 1201 1202 /* 1203 * We will never exceed downstream TMDS clock limits while 1204 * attempting deep color. If the user insists on forcing an 1205 * out of spec mode they will have to be satisfied with 8bpc. 1206 */ 1207 if (!respect_downstream_limits) 1208 bpc = 8; 1209 1210 for (; bpc >= 8; bpc -= 2) { 1211 if (intel_hdmi_bpc_possible(crtc_state, bpc, 1212 intel_dp->has_hdmi_sink, ycbcr420_output) && 1213 intel_dp_tmds_clock_valid(intel_dp, clock, bpc, ycbcr420_output, 1214 respect_downstream_limits) == MODE_OK) 1215 return bpc; 1216 } 1217 1218 return -EINVAL; 1219 } 1220 1221 static int intel_dp_max_bpp(struct intel_dp *intel_dp, 1222 const struct intel_crtc_state *crtc_state, 1223 bool respect_downstream_limits) 1224 { 1225 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 1226 struct intel_connector *intel_connector = intel_dp->attached_connector; 1227 int bpp, bpc; 1228 1229 bpc = crtc_state->pipe_bpp / 3; 1230 1231 if (intel_dp->dfp.max_bpc) 1232 bpc = min_t(int, bpc, intel_dp->dfp.max_bpc); 1233 1234 if (intel_dp->dfp.min_tmds_clock) { 1235 int max_hdmi_bpc; 1236 1237 max_hdmi_bpc = intel_dp_hdmi_compute_bpc(intel_dp, crtc_state, bpc, 1238 respect_downstream_limits); 1239 if (max_hdmi_bpc < 0) 1240 return 0; 1241 1242 bpc = min(bpc, max_hdmi_bpc); 1243 } 1244 1245 bpp = bpc * 3; 1246 if (intel_dp_is_edp(intel_dp)) { 1247 /* Get bpp from vbt only for panels that dont have bpp in edid */ 1248 if (intel_connector->base.display_info.bpc == 0 && 1249 intel_connector->panel.vbt.edp.bpp && 1250 intel_connector->panel.vbt.edp.bpp < bpp) { 1251 drm_dbg_kms(&dev_priv->drm, 1252 "clamping bpp for eDP panel to BIOS-provided %i\n", 1253 intel_connector->panel.vbt.edp.bpp); 1254 bpp = intel_connector->panel.vbt.edp.bpp; 1255 } 1256 } 1257 1258 return bpp; 1259 } 1260 1261 /* Adjust link config limits based on compliance test requests. */ 1262 void 1263 intel_dp_adjust_compliance_config(struct intel_dp *intel_dp, 1264 struct intel_crtc_state *pipe_config, 1265 struct link_config_limits *limits) 1266 { 1267 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1268 1269 /* For DP Compliance we override the computed bpp for the pipe */ 1270 if (intel_dp->compliance.test_data.bpc != 0) { 1271 int bpp = 3 * intel_dp->compliance.test_data.bpc; 1272 1273 limits->min_bpp = limits->max_bpp = bpp; 1274 pipe_config->dither_force_disable = bpp == 6 * 3; 1275 1276 drm_dbg_kms(&i915->drm, "Setting pipe_bpp to %d\n", bpp); 1277 } 1278 1279 /* Use values requested by Compliance Test Request */ 1280 if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) { 1281 int index; 1282 1283 /* Validate the compliance test data since max values 1284 * might have changed due to link train fallback. 1285 */ 1286 if (intel_dp_link_params_valid(intel_dp, intel_dp->compliance.test_link_rate, 1287 intel_dp->compliance.test_lane_count)) { 1288 index = intel_dp_rate_index(intel_dp->common_rates, 1289 intel_dp->num_common_rates, 1290 intel_dp->compliance.test_link_rate); 1291 if (index >= 0) 1292 limits->min_rate = limits->max_rate = 1293 intel_dp->compliance.test_link_rate; 1294 limits->min_lane_count = limits->max_lane_count = 1295 intel_dp->compliance.test_lane_count; 1296 } 1297 } 1298 } 1299 1300 static bool has_seamless_m_n(struct intel_connector *connector) 1301 { 1302 struct drm_i915_private *i915 = to_i915(connector->base.dev); 1303 1304 /* 1305 * Seamless M/N reprogramming only implemented 1306 * for BDW+ double buffered M/N registers so far. 1307 */ 1308 return HAS_DOUBLE_BUFFERED_M_N(i915) && 1309 intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS; 1310 } 1311 1312 static int intel_dp_mode_clock(const struct intel_crtc_state *crtc_state, 1313 const struct drm_connector_state *conn_state) 1314 { 1315 struct intel_connector *connector = to_intel_connector(conn_state->connector); 1316 const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; 1317 1318 /* FIXME a bit of a mess wrt clock vs. crtc_clock */ 1319 if (has_seamless_m_n(connector)) 1320 return intel_panel_highest_mode(connector, adjusted_mode)->clock; 1321 else 1322 return adjusted_mode->crtc_clock; 1323 } 1324 1325 /* Optimize link config in order: max bpp, min clock, min lanes */ 1326 static int 1327 intel_dp_compute_link_config_wide(struct intel_dp *intel_dp, 1328 struct intel_crtc_state *pipe_config, 1329 const struct drm_connector_state *conn_state, 1330 const struct link_config_limits *limits) 1331 { 1332 int bpp, i, lane_count, clock = intel_dp_mode_clock(pipe_config, conn_state); 1333 int mode_rate, link_rate, link_avail; 1334 1335 for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) { 1336 int output_bpp = intel_dp_output_bpp(pipe_config->output_format, bpp); 1337 1338 mode_rate = intel_dp_link_required(clock, output_bpp); 1339 1340 for (i = 0; i < intel_dp->num_common_rates; i++) { 1341 link_rate = intel_dp_common_rate(intel_dp, i); 1342 if (link_rate < limits->min_rate || 1343 link_rate > limits->max_rate) 1344 continue; 1345 1346 for (lane_count = limits->min_lane_count; 1347 lane_count <= limits->max_lane_count; 1348 lane_count <<= 1) { 1349 link_avail = intel_dp_max_data_rate(link_rate, 1350 lane_count); 1351 1352 if (mode_rate <= link_avail) { 1353 pipe_config->lane_count = lane_count; 1354 pipe_config->pipe_bpp = bpp; 1355 pipe_config->port_clock = link_rate; 1356 1357 return 0; 1358 } 1359 } 1360 } 1361 } 1362 1363 return -EINVAL; 1364 } 1365 1366 static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc) 1367 { 1368 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1369 int i, num_bpc; 1370 u8 dsc_bpc[3] = {0}; 1371 u8 dsc_max_bpc; 1372 1373 /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */ 1374 if (DISPLAY_VER(i915) >= 12) 1375 dsc_max_bpc = min_t(u8, 12, max_req_bpc); 1376 else 1377 dsc_max_bpc = min_t(u8, 10, max_req_bpc); 1378 1379 num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd, 1380 dsc_bpc); 1381 for (i = 0; i < num_bpc; i++) { 1382 if (dsc_max_bpc >= dsc_bpc[i]) 1383 return dsc_bpc[i] * 3; 1384 } 1385 1386 return 0; 1387 } 1388 1389 static int intel_dp_source_dsc_version_minor(struct intel_dp *intel_dp) 1390 { 1391 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 1392 1393 return DISPLAY_VER(i915) >= 14 ? 2 : 1; 1394 } 1395 1396 static int intel_dp_sink_dsc_version_minor(struct intel_dp *intel_dp) 1397 { 1398 return (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & DP_DSC_MINOR_MASK) >> 1399 DP_DSC_MINOR_SHIFT; 1400 } 1401 1402 static int intel_dp_dsc_compute_params(struct intel_encoder *encoder, 1403 struct intel_crtc_state *crtc_state) 1404 { 1405 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1406 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1407 struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config; 1408 u8 line_buf_depth; 1409 int ret; 1410 1411 /* 1412 * RC_MODEL_SIZE is currently a constant across all configurations. 1413 * 1414 * FIXME: Look into using sink defined DPCD DP_DSC_RC_BUF_BLK_SIZE and 1415 * DP_DSC_RC_BUF_SIZE for this. 1416 */ 1417 vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST; 1418 vdsc_cfg->pic_height = crtc_state->hw.adjusted_mode.crtc_vdisplay; 1419 1420 /* 1421 * Slice Height of 8 works for all currently available panels. So start 1422 * with that if pic_height is an integral multiple of 8. Eventually add 1423 * logic to try multiple slice heights. 1424 */ 1425 if (vdsc_cfg->pic_height % 8 == 0) 1426 vdsc_cfg->slice_height = 8; 1427 else if (vdsc_cfg->pic_height % 4 == 0) 1428 vdsc_cfg->slice_height = 4; 1429 else 1430 vdsc_cfg->slice_height = 2; 1431 1432 ret = intel_dsc_compute_params(crtc_state); 1433 if (ret) 1434 return ret; 1435 1436 vdsc_cfg->dsc_version_major = 1437 (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & 1438 DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT; 1439 vdsc_cfg->dsc_version_minor = 1440 min(intel_dp_source_dsc_version_minor(intel_dp), 1441 intel_dp_sink_dsc_version_minor(intel_dp)); 1442 1443 vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] & 1444 DP_DSC_RGB; 1445 1446 line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd); 1447 if (!line_buf_depth) { 1448 drm_dbg_kms(&i915->drm, 1449 "DSC Sink Line Buffer Depth invalid\n"); 1450 return -EINVAL; 1451 } 1452 1453 if (vdsc_cfg->dsc_version_minor == 2) 1454 vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ? 1455 DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth; 1456 else 1457 vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ? 1458 DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth; 1459 1460 vdsc_cfg->block_pred_enable = 1461 intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] & 1462 DP_DSC_BLK_PREDICTION_IS_SUPPORTED; 1463 1464 return drm_dsc_compute_rc_parameters(vdsc_cfg); 1465 } 1466 1467 static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, 1468 struct intel_crtc_state *pipe_config, 1469 struct drm_connector_state *conn_state, 1470 struct link_config_limits *limits) 1471 { 1472 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 1473 struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); 1474 const struct drm_display_mode *adjusted_mode = 1475 &pipe_config->hw.adjusted_mode; 1476 int pipe_bpp; 1477 int ret; 1478 1479 pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) && 1480 intel_dp_supports_fec(intel_dp, pipe_config); 1481 1482 if (!intel_dp_supports_dsc(intel_dp, pipe_config)) 1483 return -EINVAL; 1484 1485 pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, conn_state->max_requested_bpc); 1486 1487 if (intel_dp->force_dsc_bpc) { 1488 pipe_bpp = intel_dp->force_dsc_bpc * 3; 1489 drm_dbg_kms(&dev_priv->drm, "Input DSC BPP forced to %d", pipe_bpp); 1490 } 1491 1492 /* Min Input BPC for ICL+ is 8 */ 1493 if (pipe_bpp < 8 * 3) { 1494 drm_dbg_kms(&dev_priv->drm, 1495 "No DSC support for less than 8bpc\n"); 1496 return -EINVAL; 1497 } 1498 1499 /* 1500 * For now enable DSC for max bpp, max link rate, max lane count. 1501 * Optimize this later for the minimum possible link rate/lane count 1502 * with DSC enabled for the requested mode. 1503 */ 1504 pipe_config->pipe_bpp = pipe_bpp; 1505 pipe_config->port_clock = limits->max_rate; 1506 pipe_config->lane_count = limits->max_lane_count; 1507 1508 if (intel_dp_is_edp(intel_dp)) { 1509 pipe_config->dsc.compressed_bpp = 1510 min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4, 1511 pipe_config->pipe_bpp); 1512 pipe_config->dsc.slice_count = 1513 drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, 1514 true); 1515 } else { 1516 u16 dsc_max_output_bpp; 1517 u8 dsc_dp_slice_count; 1518 1519 dsc_max_output_bpp = 1520 intel_dp_dsc_get_output_bpp(dev_priv, 1521 pipe_config->port_clock, 1522 pipe_config->lane_count, 1523 adjusted_mode->crtc_clock, 1524 adjusted_mode->crtc_hdisplay, 1525 pipe_config->bigjoiner_pipes, 1526 pipe_bpp); 1527 dsc_dp_slice_count = 1528 intel_dp_dsc_get_slice_count(intel_dp, 1529 adjusted_mode->crtc_clock, 1530 adjusted_mode->crtc_hdisplay, 1531 pipe_config->bigjoiner_pipes); 1532 if (!dsc_max_output_bpp || !dsc_dp_slice_count) { 1533 drm_dbg_kms(&dev_priv->drm, 1534 "Compressed BPP/Slice Count not supported\n"); 1535 return -EINVAL; 1536 } 1537 pipe_config->dsc.compressed_bpp = min_t(u16, 1538 dsc_max_output_bpp >> 4, 1539 pipe_config->pipe_bpp); 1540 pipe_config->dsc.slice_count = dsc_dp_slice_count; 1541 } 1542 1543 /* 1544 * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate 1545 * is greater than the maximum Cdclock and if slice count is even 1546 * then we need to use 2 VDSC instances. 1547 */ 1548 if (adjusted_mode->crtc_clock > dev_priv->display.cdclk.max_cdclk_freq || 1549 pipe_config->bigjoiner_pipes) { 1550 if (pipe_config->dsc.slice_count < 2) { 1551 drm_dbg_kms(&dev_priv->drm, 1552 "Cannot split stream to use 2 VDSC instances\n"); 1553 return -EINVAL; 1554 } 1555 1556 pipe_config->dsc.dsc_split = true; 1557 } 1558 1559 ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config); 1560 if (ret < 0) { 1561 drm_dbg_kms(&dev_priv->drm, 1562 "Cannot compute valid DSC parameters for Input Bpp = %d " 1563 "Compressed BPP = %d\n", 1564 pipe_config->pipe_bpp, 1565 pipe_config->dsc.compressed_bpp); 1566 return ret; 1567 } 1568 1569 pipe_config->dsc.compression_enable = true; 1570 drm_dbg_kms(&dev_priv->drm, "DP DSC computed with Input Bpp = %d " 1571 "Compressed Bpp = %d Slice Count = %d\n", 1572 pipe_config->pipe_bpp, 1573 pipe_config->dsc.compressed_bpp, 1574 pipe_config->dsc.slice_count); 1575 1576 return 0; 1577 } 1578 1579 static int 1580 intel_dp_compute_link_config(struct intel_encoder *encoder, 1581 struct intel_crtc_state *pipe_config, 1582 struct drm_connector_state *conn_state, 1583 bool respect_downstream_limits) 1584 { 1585 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1586 struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); 1587 const struct drm_display_mode *adjusted_mode = 1588 &pipe_config->hw.adjusted_mode; 1589 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1590 struct link_config_limits limits; 1591 bool joiner_needs_dsc = false; 1592 int ret; 1593 1594 limits.min_rate = intel_dp_common_rate(intel_dp, 0); 1595 limits.max_rate = intel_dp_max_link_rate(intel_dp); 1596 1597 limits.min_lane_count = 1; 1598 limits.max_lane_count = intel_dp_max_lane_count(intel_dp); 1599 1600 limits.min_bpp = intel_dp_min_bpp(pipe_config->output_format); 1601 limits.max_bpp = intel_dp_max_bpp(intel_dp, pipe_config, respect_downstream_limits); 1602 1603 if (intel_dp->use_max_params) { 1604 /* 1605 * Use the maximum clock and number of lanes the eDP panel 1606 * advertizes being capable of in case the initial fast 1607 * optimal params failed us. The panels are generally 1608 * designed to support only a single clock and lane 1609 * configuration, and typically on older panels these 1610 * values correspond to the native resolution of the panel. 1611 */ 1612 limits.min_lane_count = limits.max_lane_count; 1613 limits.min_rate = limits.max_rate; 1614 } 1615 1616 intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits); 1617 1618 drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i " 1619 "max rate %d max bpp %d pixel clock %iKHz\n", 1620 limits.max_lane_count, limits.max_rate, 1621 limits.max_bpp, adjusted_mode->crtc_clock); 1622 1623 if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay, 1624 adjusted_mode->crtc_clock)) 1625 pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe); 1626 1627 /* 1628 * Pipe joiner needs compression up to display 12 due to bandwidth 1629 * limitation. DG2 onwards pipe joiner can be enabled without 1630 * compression. 1631 */ 1632 joiner_needs_dsc = DISPLAY_VER(i915) < 13 && pipe_config->bigjoiner_pipes; 1633 1634 /* 1635 * Optimize for slow and wide for everything, because there are some 1636 * eDP 1.3 and 1.4 panels don't work well with fast and narrow. 1637 */ 1638 ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, conn_state, &limits); 1639 1640 if (ret || joiner_needs_dsc || intel_dp->force_dsc_en) { 1641 drm_dbg_kms(&i915->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n", 1642 str_yes_no(ret), str_yes_no(joiner_needs_dsc), 1643 str_yes_no(intel_dp->force_dsc_en)); 1644 ret = intel_dp_dsc_compute_config(intel_dp, pipe_config, 1645 conn_state, &limits); 1646 if (ret < 0) 1647 return ret; 1648 } 1649 1650 if (pipe_config->dsc.compression_enable) { 1651 drm_dbg_kms(&i915->drm, 1652 "DP lane count %d clock %d Input bpp %d Compressed bpp %d\n", 1653 pipe_config->lane_count, pipe_config->port_clock, 1654 pipe_config->pipe_bpp, 1655 pipe_config->dsc.compressed_bpp); 1656 1657 drm_dbg_kms(&i915->drm, 1658 "DP link rate required %i available %i\n", 1659 intel_dp_link_required(adjusted_mode->crtc_clock, 1660 pipe_config->dsc.compressed_bpp), 1661 intel_dp_max_data_rate(pipe_config->port_clock, 1662 pipe_config->lane_count)); 1663 } else { 1664 drm_dbg_kms(&i915->drm, "DP lane count %d clock %d bpp %d\n", 1665 pipe_config->lane_count, pipe_config->port_clock, 1666 pipe_config->pipe_bpp); 1667 1668 drm_dbg_kms(&i915->drm, 1669 "DP link rate required %i available %i\n", 1670 intel_dp_link_required(adjusted_mode->crtc_clock, 1671 pipe_config->pipe_bpp), 1672 intel_dp_max_data_rate(pipe_config->port_clock, 1673 pipe_config->lane_count)); 1674 } 1675 return 0; 1676 } 1677 1678 bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state, 1679 const struct drm_connector_state *conn_state) 1680 { 1681 const struct intel_digital_connector_state *intel_conn_state = 1682 to_intel_digital_connector_state(conn_state); 1683 const struct drm_display_mode *adjusted_mode = 1684 &crtc_state->hw.adjusted_mode; 1685 1686 /* 1687 * Our YCbCr output is always limited range. 1688 * crtc_state->limited_color_range only applies to RGB, 1689 * and it must never be set for YCbCr or we risk setting 1690 * some conflicting bits in PIPECONF which will mess up 1691 * the colors on the monitor. 1692 */ 1693 if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) 1694 return false; 1695 1696 if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) { 1697 /* 1698 * See: 1699 * CEA-861-E - 5.1 Default Encoding Parameters 1700 * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry 1701 */ 1702 return crtc_state->pipe_bpp != 18 && 1703 drm_default_rgb_quant_range(adjusted_mode) == 1704 HDMI_QUANTIZATION_RANGE_LIMITED; 1705 } else { 1706 return intel_conn_state->broadcast_rgb == 1707 INTEL_BROADCAST_RGB_LIMITED; 1708 } 1709 } 1710 1711 static bool intel_dp_port_has_audio(struct drm_i915_private *dev_priv, 1712 enum port port) 1713 { 1714 if (IS_G4X(dev_priv)) 1715 return false; 1716 if (DISPLAY_VER(dev_priv) < 12 && port == PORT_A) 1717 return false; 1718 1719 return true; 1720 } 1721 1722 static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc_state, 1723 const struct drm_connector_state *conn_state, 1724 struct drm_dp_vsc_sdp *vsc) 1725 { 1726 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 1727 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); 1728 1729 /* 1730 * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 1731 * VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/ 1732 * Colorimetry Format indication. 1733 */ 1734 vsc->revision = 0x5; 1735 vsc->length = 0x13; 1736 1737 /* DP 1.4a spec, Table 2-120 */ 1738 switch (crtc_state->output_format) { 1739 case INTEL_OUTPUT_FORMAT_YCBCR444: 1740 vsc->pixelformat = DP_PIXELFORMAT_YUV444; 1741 break; 1742 case INTEL_OUTPUT_FORMAT_YCBCR420: 1743 vsc->pixelformat = DP_PIXELFORMAT_YUV420; 1744 break; 1745 case INTEL_OUTPUT_FORMAT_RGB: 1746 default: 1747 vsc->pixelformat = DP_PIXELFORMAT_RGB; 1748 } 1749 1750 switch (conn_state->colorspace) { 1751 case DRM_MODE_COLORIMETRY_BT709_YCC: 1752 vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; 1753 break; 1754 case DRM_MODE_COLORIMETRY_XVYCC_601: 1755 vsc->colorimetry = DP_COLORIMETRY_XVYCC_601; 1756 break; 1757 case DRM_MODE_COLORIMETRY_XVYCC_709: 1758 vsc->colorimetry = DP_COLORIMETRY_XVYCC_709; 1759 break; 1760 case DRM_MODE_COLORIMETRY_SYCC_601: 1761 vsc->colorimetry = DP_COLORIMETRY_SYCC_601; 1762 break; 1763 case DRM_MODE_COLORIMETRY_OPYCC_601: 1764 vsc->colorimetry = DP_COLORIMETRY_OPYCC_601; 1765 break; 1766 case DRM_MODE_COLORIMETRY_BT2020_CYCC: 1767 vsc->colorimetry = DP_COLORIMETRY_BT2020_CYCC; 1768 break; 1769 case DRM_MODE_COLORIMETRY_BT2020_RGB: 1770 vsc->colorimetry = DP_COLORIMETRY_BT2020_RGB; 1771 break; 1772 case DRM_MODE_COLORIMETRY_BT2020_YCC: 1773 vsc->colorimetry = DP_COLORIMETRY_BT2020_YCC; 1774 break; 1775 case DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65: 1776 case DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER: 1777 vsc->colorimetry = DP_COLORIMETRY_DCI_P3_RGB; 1778 break; 1779 default: 1780 /* 1781 * RGB->YCBCR color conversion uses the BT.709 1782 * color space. 1783 */ 1784 if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) 1785 vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; 1786 else 1787 vsc->colorimetry = DP_COLORIMETRY_DEFAULT; 1788 break; 1789 } 1790 1791 vsc->bpc = crtc_state->pipe_bpp / 3; 1792 1793 /* only RGB pixelformat supports 6 bpc */ 1794 drm_WARN_ON(&dev_priv->drm, 1795 vsc->bpc == 6 && vsc->pixelformat != DP_PIXELFORMAT_RGB); 1796 1797 /* all YCbCr are always limited range */ 1798 vsc->dynamic_range = DP_DYNAMIC_RANGE_CTA; 1799 vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED; 1800 } 1801 1802 static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp, 1803 struct intel_crtc_state *crtc_state, 1804 const struct drm_connector_state *conn_state) 1805 { 1806 struct drm_dp_vsc_sdp *vsc = &crtc_state->infoframes.vsc; 1807 1808 /* When a crtc state has PSR, VSC SDP will be handled by PSR routine */ 1809 if (crtc_state->has_psr) 1810 return; 1811 1812 if (!intel_dp_needs_vsc_sdp(crtc_state, conn_state)) 1813 return; 1814 1815 crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC); 1816 vsc->sdp_type = DP_SDP_VSC; 1817 intel_dp_compute_vsc_colorimetry(crtc_state, conn_state, 1818 &crtc_state->infoframes.vsc); 1819 } 1820 1821 void intel_dp_compute_psr_vsc_sdp(struct intel_dp *intel_dp, 1822 const struct intel_crtc_state *crtc_state, 1823 const struct drm_connector_state *conn_state, 1824 struct drm_dp_vsc_sdp *vsc) 1825 { 1826 vsc->sdp_type = DP_SDP_VSC; 1827 1828 if (crtc_state->has_psr2) { 1829 if (intel_dp->psr.colorimetry_support && 1830 intel_dp_needs_vsc_sdp(crtc_state, conn_state)) { 1831 /* [PSR2, +Colorimetry] */ 1832 intel_dp_compute_vsc_colorimetry(crtc_state, conn_state, 1833 vsc); 1834 } else { 1835 /* 1836 * [PSR2, -Colorimetry] 1837 * Prepare VSC Header for SU as per eDP 1.4 spec, Table 6-11 1838 * 3D stereo + PSR/PSR2 + Y-coordinate. 1839 */ 1840 vsc->revision = 0x4; 1841 vsc->length = 0xe; 1842 } 1843 } else { 1844 /* 1845 * [PSR1] 1846 * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 1847 * VSC SDP supporting 3D stereo + PSR (applies to eDP v1.3 or 1848 * higher). 1849 */ 1850 vsc->revision = 0x2; 1851 vsc->length = 0x8; 1852 } 1853 } 1854 1855 static void 1856 intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp, 1857 struct intel_crtc_state *crtc_state, 1858 const struct drm_connector_state *conn_state) 1859 { 1860 int ret; 1861 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 1862 struct hdmi_drm_infoframe *drm_infoframe = &crtc_state->infoframes.drm.drm; 1863 1864 if (!conn_state->hdr_output_metadata) 1865 return; 1866 1867 ret = drm_hdmi_infoframe_set_hdr_metadata(drm_infoframe, conn_state); 1868 1869 if (ret) { 1870 drm_dbg_kms(&dev_priv->drm, "couldn't set HDR metadata in infoframe\n"); 1871 return; 1872 } 1873 1874 crtc_state->infoframes.enable |= 1875 intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA); 1876 } 1877 1878 static bool cpu_transcoder_has_drrs(struct drm_i915_private *i915, 1879 enum transcoder cpu_transcoder) 1880 { 1881 if (HAS_DOUBLE_BUFFERED_M_N(i915)) 1882 return true; 1883 1884 return intel_cpu_transcoder_has_m2_n2(i915, cpu_transcoder); 1885 } 1886 1887 static bool can_enable_drrs(struct intel_connector *connector, 1888 const struct intel_crtc_state *pipe_config, 1889 const struct drm_display_mode *downclock_mode) 1890 { 1891 struct drm_i915_private *i915 = to_i915(connector->base.dev); 1892 1893 if (pipe_config->vrr.enable) 1894 return false; 1895 1896 /* 1897 * DRRS and PSR can't be enable together, so giving preference to PSR 1898 * as it allows more power-savings by complete shutting down display, 1899 * so to guarantee this, intel_drrs_compute_config() must be called 1900 * after intel_psr_compute_config(). 1901 */ 1902 if (pipe_config->has_psr) 1903 return false; 1904 1905 /* FIXME missing FDI M2/N2 etc. */ 1906 if (pipe_config->has_pch_encoder) 1907 return false; 1908 1909 if (!cpu_transcoder_has_drrs(i915, pipe_config->cpu_transcoder)) 1910 return false; 1911 1912 return downclock_mode && 1913 intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS; 1914 } 1915 1916 static void 1917 intel_dp_drrs_compute_config(struct intel_connector *connector, 1918 struct intel_crtc_state *pipe_config, 1919 int output_bpp) 1920 { 1921 struct drm_i915_private *i915 = to_i915(connector->base.dev); 1922 const struct drm_display_mode *downclock_mode = 1923 intel_panel_downclock_mode(connector, &pipe_config->hw.adjusted_mode); 1924 int pixel_clock; 1925 1926 if (has_seamless_m_n(connector)) 1927 pipe_config->seamless_m_n = true; 1928 1929 if (!can_enable_drrs(connector, pipe_config, downclock_mode)) { 1930 if (intel_cpu_transcoder_has_m2_n2(i915, pipe_config->cpu_transcoder)) 1931 intel_zero_m_n(&pipe_config->dp_m2_n2); 1932 return; 1933 } 1934 1935 if (IS_IRONLAKE(i915) || IS_SANDYBRIDGE(i915) || IS_IVYBRIDGE(i915)) 1936 pipe_config->msa_timing_delay = connector->panel.vbt.edp.drrs_msa_timing_delay; 1937 1938 pipe_config->has_drrs = true; 1939 1940 pixel_clock = downclock_mode->clock; 1941 if (pipe_config->splitter.enable) 1942 pixel_clock /= pipe_config->splitter.link_count; 1943 1944 intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock, 1945 pipe_config->port_clock, &pipe_config->dp_m2_n2, 1946 pipe_config->fec_enable); 1947 1948 /* FIXME: abstract this better */ 1949 if (pipe_config->splitter.enable) 1950 pipe_config->dp_m2_n2.data_m *= pipe_config->splitter.link_count; 1951 } 1952 1953 static bool intel_dp_has_audio(struct intel_encoder *encoder, 1954 const struct intel_crtc_state *crtc_state, 1955 const struct drm_connector_state *conn_state) 1956 { 1957 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1958 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1959 const struct intel_digital_connector_state *intel_conn_state = 1960 to_intel_digital_connector_state(conn_state); 1961 1962 if (!intel_dp_port_has_audio(i915, encoder->port)) 1963 return false; 1964 1965 if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO) 1966 return intel_dp->has_audio; 1967 else 1968 return intel_conn_state->force_audio == HDMI_AUDIO_ON; 1969 } 1970 1971 static int 1972 intel_dp_compute_output_format(struct intel_encoder *encoder, 1973 struct intel_crtc_state *crtc_state, 1974 struct drm_connector_state *conn_state, 1975 bool respect_downstream_limits) 1976 { 1977 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 1978 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1979 struct intel_connector *connector = intel_dp->attached_connector; 1980 const struct drm_display_info *info = &connector->base.display_info; 1981 const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; 1982 bool ycbcr_420_only; 1983 int ret; 1984 1985 ycbcr_420_only = drm_mode_is_420_only(info, adjusted_mode); 1986 1987 crtc_state->output_format = intel_dp_output_format(connector, ycbcr_420_only); 1988 1989 if (ycbcr_420_only && !intel_dp_is_ycbcr420(intel_dp, crtc_state)) { 1990 drm_dbg_kms(&i915->drm, 1991 "YCbCr 4:2:0 mode but YCbCr 4:2:0 output not possible. Falling back to RGB.\n"); 1992 crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB; 1993 } 1994 1995 ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state, 1996 respect_downstream_limits); 1997 if (ret) { 1998 if (intel_dp_is_ycbcr420(intel_dp, crtc_state) || 1999 !connector->base.ycbcr_420_allowed || 2000 !drm_mode_is_420_also(info, adjusted_mode)) 2001 return ret; 2002 2003 crtc_state->output_format = intel_dp_output_format(connector, true); 2004 ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state, 2005 respect_downstream_limits); 2006 } 2007 2008 return ret; 2009 } 2010 2011 int 2012 intel_dp_compute_config(struct intel_encoder *encoder, 2013 struct intel_crtc_state *pipe_config, 2014 struct drm_connector_state *conn_state) 2015 { 2016 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 2017 struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; 2018 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2019 const struct drm_display_mode *fixed_mode; 2020 struct intel_connector *connector = intel_dp->attached_connector; 2021 int ret = 0, output_bpp; 2022 2023 if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && encoder->port != PORT_A) 2024 pipe_config->has_pch_encoder = true; 2025 2026 pipe_config->has_audio = intel_dp_has_audio(encoder, pipe_config, conn_state); 2027 2028 fixed_mode = intel_panel_fixed_mode(connector, adjusted_mode); 2029 if (intel_dp_is_edp(intel_dp) && fixed_mode) { 2030 ret = intel_panel_compute_config(connector, adjusted_mode); 2031 if (ret) 2032 return ret; 2033 } 2034 2035 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 2036 return -EINVAL; 2037 2038 if (HAS_GMCH(dev_priv) && 2039 adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) 2040 return -EINVAL; 2041 2042 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) 2043 return -EINVAL; 2044 2045 if (intel_dp_hdisplay_bad(dev_priv, adjusted_mode->crtc_hdisplay)) 2046 return -EINVAL; 2047 2048 /* 2049 * Try to respect downstream TMDS clock limits first, if 2050 * that fails assume the user might know something we don't. 2051 */ 2052 ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, true); 2053 if (ret) 2054 ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, false); 2055 if (ret) 2056 return ret; 2057 2058 if ((intel_dp_is_edp(intel_dp) && fixed_mode) || 2059 pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { 2060 ret = intel_panel_fitting(pipe_config, conn_state); 2061 if (ret) 2062 return ret; 2063 } 2064 2065 pipe_config->limited_color_range = 2066 intel_dp_limited_color_range(pipe_config, conn_state); 2067 2068 if (pipe_config->dsc.compression_enable) 2069 output_bpp = pipe_config->dsc.compressed_bpp; 2070 else 2071 output_bpp = intel_dp_output_bpp(pipe_config->output_format, 2072 pipe_config->pipe_bpp); 2073 2074 if (intel_dp->mso_link_count) { 2075 int n = intel_dp->mso_link_count; 2076 int overlap = intel_dp->mso_pixel_overlap; 2077 2078 pipe_config->splitter.enable = true; 2079 pipe_config->splitter.link_count = n; 2080 pipe_config->splitter.pixel_overlap = overlap; 2081 2082 drm_dbg_kms(&dev_priv->drm, "MSO link count %d, pixel overlap %d\n", 2083 n, overlap); 2084 2085 adjusted_mode->crtc_hdisplay = adjusted_mode->crtc_hdisplay / n + overlap; 2086 adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hblank_start / n + overlap; 2087 adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_hblank_end / n + overlap; 2088 adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hsync_start / n + overlap; 2089 adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_end / n + overlap; 2090 adjusted_mode->crtc_htotal = adjusted_mode->crtc_htotal / n + overlap; 2091 adjusted_mode->crtc_clock /= n; 2092 } 2093 2094 intel_link_compute_m_n(output_bpp, 2095 pipe_config->lane_count, 2096 adjusted_mode->crtc_clock, 2097 pipe_config->port_clock, 2098 &pipe_config->dp_m_n, 2099 pipe_config->fec_enable); 2100 2101 /* FIXME: abstract this better */ 2102 if (pipe_config->splitter.enable) 2103 pipe_config->dp_m_n.data_m *= pipe_config->splitter.link_count; 2104 2105 if (!HAS_DDI(dev_priv)) 2106 g4x_dp_set_clock(encoder, pipe_config); 2107 2108 intel_vrr_compute_config(pipe_config, conn_state); 2109 intel_psr_compute_config(intel_dp, pipe_config, conn_state); 2110 intel_dp_drrs_compute_config(connector, pipe_config, output_bpp); 2111 intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state); 2112 intel_dp_compute_hdr_metadata_infoframe_sdp(intel_dp, pipe_config, conn_state); 2113 2114 return 0; 2115 } 2116 2117 void intel_dp_set_link_params(struct intel_dp *intel_dp, 2118 int link_rate, int lane_count) 2119 { 2120 memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); 2121 intel_dp->link_trained = false; 2122 intel_dp->link_rate = link_rate; 2123 intel_dp->lane_count = lane_count; 2124 } 2125 2126 static void intel_dp_reset_max_link_params(struct intel_dp *intel_dp) 2127 { 2128 intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp); 2129 intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp); 2130 } 2131 2132 /* Enable backlight PWM and backlight PP control. */ 2133 void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state, 2134 const struct drm_connector_state *conn_state) 2135 { 2136 struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(conn_state->best_encoder)); 2137 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2138 2139 if (!intel_dp_is_edp(intel_dp)) 2140 return; 2141 2142 drm_dbg_kms(&i915->drm, "\n"); 2143 2144 intel_backlight_enable(crtc_state, conn_state); 2145 intel_pps_backlight_on(intel_dp); 2146 } 2147 2148 /* Disable backlight PP control and backlight PWM. */ 2149 void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state) 2150 { 2151 struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder)); 2152 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2153 2154 if (!intel_dp_is_edp(intel_dp)) 2155 return; 2156 2157 drm_dbg_kms(&i915->drm, "\n"); 2158 2159 intel_pps_backlight_off(intel_dp); 2160 intel_backlight_disable(old_conn_state); 2161 } 2162 2163 static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp) 2164 { 2165 /* 2166 * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus 2167 * be capable of signalling downstream hpd with a long pulse. 2168 * Whether or not that means D3 is safe to use is not clear, 2169 * but let's assume so until proven otherwise. 2170 * 2171 * FIXME should really check all downstream ports... 2172 */ 2173 return intel_dp->dpcd[DP_DPCD_REV] == 0x11 && 2174 drm_dp_is_branch(intel_dp->dpcd) && 2175 intel_dp->downstream_ports[0] & DP_DS_PORT_HPD; 2176 } 2177 2178 void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp, 2179 const struct intel_crtc_state *crtc_state, 2180 bool enable) 2181 { 2182 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2183 int ret; 2184 2185 if (!crtc_state->dsc.compression_enable) 2186 return; 2187 2188 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_DSC_ENABLE, 2189 enable ? DP_DECOMPRESSION_EN : 0); 2190 if (ret < 0) 2191 drm_dbg_kms(&i915->drm, 2192 "Failed to %s sink decompression state\n", 2193 str_enable_disable(enable)); 2194 } 2195 2196 static void 2197 intel_edp_init_source_oui(struct intel_dp *intel_dp, bool careful) 2198 { 2199 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2200 u8 oui[] = { 0x00, 0xaa, 0x01 }; 2201 u8 buf[3] = { 0 }; 2202 2203 /* 2204 * During driver init, we want to be careful and avoid changing the source OUI if it's 2205 * already set to what we want, so as to avoid clearing any state by accident 2206 */ 2207 if (careful) { 2208 if (drm_dp_dpcd_read(&intel_dp->aux, DP_SOURCE_OUI, buf, sizeof(buf)) < 0) 2209 drm_err(&i915->drm, "Failed to read source OUI\n"); 2210 2211 if (memcmp(oui, buf, sizeof(oui)) == 0) 2212 return; 2213 } 2214 2215 if (drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, oui, sizeof(oui)) < 0) 2216 drm_err(&i915->drm, "Failed to write source OUI\n"); 2217 2218 intel_dp->last_oui_write = jiffies; 2219 } 2220 2221 void intel_dp_wait_source_oui(struct intel_dp *intel_dp) 2222 { 2223 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2224 2225 drm_dbg_kms(&i915->drm, "Performing OUI wait\n"); 2226 wait_remaining_ms_from_jiffies(intel_dp->last_oui_write, 30); 2227 } 2228 2229 /* If the device supports it, try to set the power state appropriately */ 2230 void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode) 2231 { 2232 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 2233 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 2234 int ret, i; 2235 2236 /* Should have a valid DPCD by this point */ 2237 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) 2238 return; 2239 2240 if (mode != DP_SET_POWER_D0) { 2241 if (downstream_hpd_needs_d0(intel_dp)) 2242 return; 2243 2244 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); 2245 } else { 2246 struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp); 2247 2248 lspcon_resume(dp_to_dig_port(intel_dp)); 2249 2250 /* Write the source OUI as early as possible */ 2251 if (intel_dp_is_edp(intel_dp)) 2252 intel_edp_init_source_oui(intel_dp, false); 2253 2254 /* 2255 * When turning on, we need to retry for 1ms to give the sink 2256 * time to wake up. 2257 */ 2258 for (i = 0; i < 3; i++) { 2259 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); 2260 if (ret == 1) 2261 break; 2262 msleep(1); 2263 } 2264 2265 if (ret == 1 && lspcon->active) 2266 lspcon_wait_pcon_mode(lspcon); 2267 } 2268 2269 if (ret != 1) 2270 drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Set power to %s failed\n", 2271 encoder->base.base.id, encoder->base.name, 2272 mode == DP_SET_POWER_D0 ? "D0" : "D3"); 2273 } 2274 2275 static bool 2276 intel_dp_get_dpcd(struct intel_dp *intel_dp); 2277 2278 /** 2279 * intel_dp_sync_state - sync the encoder state during init/resume 2280 * @encoder: intel encoder to sync 2281 * @crtc_state: state for the CRTC connected to the encoder 2282 * 2283 * Sync any state stored in the encoder wrt. HW state during driver init 2284 * and system resume. 2285 */ 2286 void intel_dp_sync_state(struct intel_encoder *encoder, 2287 const struct intel_crtc_state *crtc_state) 2288 { 2289 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2290 2291 if (!crtc_state) 2292 return; 2293 2294 /* 2295 * Don't clobber DPCD if it's been already read out during output 2296 * setup (eDP) or detect. 2297 */ 2298 if (intel_dp->dpcd[DP_DPCD_REV] == 0) 2299 intel_dp_get_dpcd(intel_dp); 2300 2301 intel_dp_reset_max_link_params(intel_dp); 2302 } 2303 2304 bool intel_dp_initial_fastset_check(struct intel_encoder *encoder, 2305 struct intel_crtc_state *crtc_state) 2306 { 2307 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 2308 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2309 2310 /* 2311 * If BIOS has set an unsupported or non-standard link rate for some 2312 * reason force an encoder recompute and full modeset. 2313 */ 2314 if (intel_dp_rate_index(intel_dp->source_rates, intel_dp->num_source_rates, 2315 crtc_state->port_clock) < 0) { 2316 drm_dbg_kms(&i915->drm, "Forcing full modeset due to unsupported link rate\n"); 2317 crtc_state->uapi.connectors_changed = true; 2318 return false; 2319 } 2320 2321 /* 2322 * FIXME hack to force full modeset when DSC is being used. 2323 * 2324 * As long as we do not have full state readout and config comparison 2325 * of crtc_state->dsc, we have no way to ensure reliable fastset. 2326 * Remove once we have readout for DSC. 2327 */ 2328 if (crtc_state->dsc.compression_enable) { 2329 drm_dbg_kms(&i915->drm, "Forcing full modeset due to DSC being enabled\n"); 2330 crtc_state->uapi.mode_changed = true; 2331 return false; 2332 } 2333 2334 if (CAN_PSR(intel_dp)) { 2335 drm_dbg_kms(&i915->drm, "Forcing full modeset to compute PSR state\n"); 2336 crtc_state->uapi.mode_changed = true; 2337 return false; 2338 } 2339 2340 return true; 2341 } 2342 2343 static void intel_dp_get_pcon_dsc_cap(struct intel_dp *intel_dp) 2344 { 2345 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2346 2347 /* Clear the cached register set to avoid using stale values */ 2348 2349 memset(intel_dp->pcon_dsc_dpcd, 0, sizeof(intel_dp->pcon_dsc_dpcd)); 2350 2351 if (drm_dp_dpcd_read(&intel_dp->aux, DP_PCON_DSC_ENCODER, 2352 intel_dp->pcon_dsc_dpcd, 2353 sizeof(intel_dp->pcon_dsc_dpcd)) < 0) 2354 drm_err(&i915->drm, "Failed to read DPCD register 0x%x\n", 2355 DP_PCON_DSC_ENCODER); 2356 2357 drm_dbg_kms(&i915->drm, "PCON ENCODER DSC DPCD: %*ph\n", 2358 (int)sizeof(intel_dp->pcon_dsc_dpcd), intel_dp->pcon_dsc_dpcd); 2359 } 2360 2361 static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) 2362 { 2363 int bw_gbps[] = {9, 18, 24, 32, 40, 48}; 2364 int i; 2365 2366 for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) { 2367 if (frl_bw_mask & (1 << i)) 2368 return bw_gbps[i]; 2369 } 2370 return 0; 2371 } 2372 2373 static int intel_dp_pcon_set_frl_mask(int max_frl) 2374 { 2375 switch (max_frl) { 2376 case 48: 2377 return DP_PCON_FRL_BW_MASK_48GBPS; 2378 case 40: 2379 return DP_PCON_FRL_BW_MASK_40GBPS; 2380 case 32: 2381 return DP_PCON_FRL_BW_MASK_32GBPS; 2382 case 24: 2383 return DP_PCON_FRL_BW_MASK_24GBPS; 2384 case 18: 2385 return DP_PCON_FRL_BW_MASK_18GBPS; 2386 case 9: 2387 return DP_PCON_FRL_BW_MASK_9GBPS; 2388 } 2389 2390 return 0; 2391 } 2392 2393 static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) 2394 { 2395 struct intel_connector *intel_connector = intel_dp->attached_connector; 2396 struct drm_connector *connector = &intel_connector->base; 2397 int max_frl_rate; 2398 int max_lanes, rate_per_lane; 2399 int max_dsc_lanes, dsc_rate_per_lane; 2400 2401 max_lanes = connector->display_info.hdmi.max_lanes; 2402 rate_per_lane = connector->display_info.hdmi.max_frl_rate_per_lane; 2403 max_frl_rate = max_lanes * rate_per_lane; 2404 2405 if (connector->display_info.hdmi.dsc_cap.v_1p2) { 2406 max_dsc_lanes = connector->display_info.hdmi.dsc_cap.max_lanes; 2407 dsc_rate_per_lane = connector->display_info.hdmi.dsc_cap.max_frl_rate_per_lane; 2408 if (max_dsc_lanes && dsc_rate_per_lane) 2409 max_frl_rate = min(max_frl_rate, max_dsc_lanes * dsc_rate_per_lane); 2410 } 2411 2412 return max_frl_rate; 2413 } 2414 2415 static bool 2416 intel_dp_pcon_is_frl_trained(struct intel_dp *intel_dp, 2417 u8 max_frl_bw_mask, u8 *frl_trained_mask) 2418 { 2419 if (drm_dp_pcon_hdmi_link_active(&intel_dp->aux) && 2420 drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, frl_trained_mask) == DP_PCON_HDMI_MODE_FRL && 2421 *frl_trained_mask >= max_frl_bw_mask) 2422 return true; 2423 2424 return false; 2425 } 2426 2427 static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) 2428 { 2429 #define TIMEOUT_FRL_READY_MS 500 2430 #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000 2431 2432 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2433 int max_frl_bw, max_pcon_frl_bw, max_edid_frl_bw, ret; 2434 u8 max_frl_bw_mask = 0, frl_trained_mask; 2435 bool is_active; 2436 2437 max_pcon_frl_bw = intel_dp->dfp.pcon_max_frl_bw; 2438 drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl_bw); 2439 2440 max_edid_frl_bw = intel_dp_hdmi_sink_max_frl(intel_dp); 2441 drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n", max_edid_frl_bw); 2442 2443 max_frl_bw = min(max_edid_frl_bw, max_pcon_frl_bw); 2444 2445 if (max_frl_bw <= 0) 2446 return -EINVAL; 2447 2448 max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw); 2449 drm_dbg(&i915->drm, "MAX_FRL_BW_MASK = %u\n", max_frl_bw_mask); 2450 2451 if (intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask)) 2452 goto frl_trained; 2453 2454 ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false); 2455 if (ret < 0) 2456 return ret; 2457 /* Wait for PCON to be FRL Ready */ 2458 wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true, TIMEOUT_FRL_READY_MS); 2459 2460 if (!is_active) 2461 return -ETIMEDOUT; 2462 2463 ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, 2464 DP_PCON_ENABLE_SEQUENTIAL_LINK); 2465 if (ret < 0) 2466 return ret; 2467 ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, 2468 DP_PCON_FRL_LINK_TRAIN_NORMAL); 2469 if (ret < 0) 2470 return ret; 2471 ret = drm_dp_pcon_frl_enable(&intel_dp->aux); 2472 if (ret < 0) 2473 return ret; 2474 /* 2475 * Wait for FRL to be completed 2476 * Check if the HDMI Link is up and active. 2477 */ 2478 wait_for(is_active = 2479 intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask), 2480 TIMEOUT_HDMI_LINK_ACTIVE_MS); 2481 2482 if (!is_active) 2483 return -ETIMEDOUT; 2484 2485 frl_trained: 2486 drm_dbg(&i915->drm, "FRL_TRAINED_MASK = %u\n", frl_trained_mask); 2487 intel_dp->frl.trained_rate_gbps = intel_dp_pcon_get_frl_mask(frl_trained_mask); 2488 intel_dp->frl.is_trained = true; 2489 drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n", intel_dp->frl.trained_rate_gbps); 2490 2491 return 0; 2492 } 2493 2494 static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) 2495 { 2496 if (drm_dp_is_branch(intel_dp->dpcd) && 2497 intel_dp->has_hdmi_sink && 2498 intel_dp_hdmi_sink_max_frl(intel_dp) > 0) 2499 return true; 2500 2501 return false; 2502 } 2503 2504 static 2505 int intel_dp_pcon_set_tmds_mode(struct intel_dp *intel_dp) 2506 { 2507 int ret; 2508 u8 buf = 0; 2509 2510 /* Set PCON source control mode */ 2511 buf |= DP_PCON_ENABLE_SOURCE_CTL_MODE; 2512 2513 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); 2514 if (ret < 0) 2515 return ret; 2516 2517 /* Set HDMI LINK ENABLE */ 2518 buf |= DP_PCON_ENABLE_HDMI_LINK; 2519 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); 2520 if (ret < 0) 2521 return ret; 2522 2523 return 0; 2524 } 2525 2526 void intel_dp_check_frl_training(struct intel_dp *intel_dp) 2527 { 2528 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 2529 2530 /* 2531 * Always go for FRL training if: 2532 * -PCON supports SRC_CTL_MODE (VESA DP2.0-HDMI2.1 PCON Spec Draft-1 Sec-7) 2533 * -sink is HDMI2.1 2534 */ 2535 if (!(intel_dp->downstream_ports[2] & DP_PCON_SOURCE_CTL_MODE) || 2536 !intel_dp_is_hdmi_2_1_sink(intel_dp) || 2537 intel_dp->frl.is_trained) 2538 return; 2539 2540 if (intel_dp_pcon_start_frl_training(intel_dp) < 0) { 2541 int ret, mode; 2542 2543 drm_dbg(&dev_priv->drm, "Couldn't set FRL mode, continuing with TMDS mode\n"); 2544 ret = intel_dp_pcon_set_tmds_mode(intel_dp); 2545 mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL); 2546 2547 if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS) 2548 drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n"); 2549 } else { 2550 drm_dbg(&dev_priv->drm, "FRL training Completed\n"); 2551 } 2552 } 2553 2554 static int 2555 intel_dp_pcon_dsc_enc_slice_height(const struct intel_crtc_state *crtc_state) 2556 { 2557 int vactive = crtc_state->hw.adjusted_mode.vdisplay; 2558 2559 return intel_hdmi_dsc_get_slice_height(vactive); 2560 } 2561 2562 static int 2563 intel_dp_pcon_dsc_enc_slices(struct intel_dp *intel_dp, 2564 const struct intel_crtc_state *crtc_state) 2565 { 2566 struct intel_connector *intel_connector = intel_dp->attached_connector; 2567 struct drm_connector *connector = &intel_connector->base; 2568 int hdmi_throughput = connector->display_info.hdmi.dsc_cap.clk_per_slice; 2569 int hdmi_max_slices = connector->display_info.hdmi.dsc_cap.max_slices; 2570 int pcon_max_slices = drm_dp_pcon_dsc_max_slices(intel_dp->pcon_dsc_dpcd); 2571 int pcon_max_slice_width = drm_dp_pcon_dsc_max_slice_width(intel_dp->pcon_dsc_dpcd); 2572 2573 return intel_hdmi_dsc_get_num_slices(crtc_state, pcon_max_slices, 2574 pcon_max_slice_width, 2575 hdmi_max_slices, hdmi_throughput); 2576 } 2577 2578 static int 2579 intel_dp_pcon_dsc_enc_bpp(struct intel_dp *intel_dp, 2580 const struct intel_crtc_state *crtc_state, 2581 int num_slices, int slice_width) 2582 { 2583 struct intel_connector *intel_connector = intel_dp->attached_connector; 2584 struct drm_connector *connector = &intel_connector->base; 2585 int output_format = crtc_state->output_format; 2586 bool hdmi_all_bpp = connector->display_info.hdmi.dsc_cap.all_bpp; 2587 int pcon_fractional_bpp = drm_dp_pcon_dsc_bpp_incr(intel_dp->pcon_dsc_dpcd); 2588 int hdmi_max_chunk_bytes = 2589 connector->display_info.hdmi.dsc_cap.total_chunk_kbytes * 1024; 2590 2591 return intel_hdmi_dsc_get_bpp(pcon_fractional_bpp, slice_width, 2592 num_slices, output_format, hdmi_all_bpp, 2593 hdmi_max_chunk_bytes); 2594 } 2595 2596 void 2597 intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp, 2598 const struct intel_crtc_state *crtc_state) 2599 { 2600 u8 pps_param[6]; 2601 int slice_height; 2602 int slice_width; 2603 int num_slices; 2604 int bits_per_pixel; 2605 int ret; 2606 struct intel_connector *intel_connector = intel_dp->attached_connector; 2607 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2608 struct drm_connector *connector; 2609 bool hdmi_is_dsc_1_2; 2610 2611 if (!intel_dp_is_hdmi_2_1_sink(intel_dp)) 2612 return; 2613 2614 if (!intel_connector) 2615 return; 2616 connector = &intel_connector->base; 2617 hdmi_is_dsc_1_2 = connector->display_info.hdmi.dsc_cap.v_1p2; 2618 2619 if (!drm_dp_pcon_enc_is_dsc_1_2(intel_dp->pcon_dsc_dpcd) || 2620 !hdmi_is_dsc_1_2) 2621 return; 2622 2623 slice_height = intel_dp_pcon_dsc_enc_slice_height(crtc_state); 2624 if (!slice_height) 2625 return; 2626 2627 num_slices = intel_dp_pcon_dsc_enc_slices(intel_dp, crtc_state); 2628 if (!num_slices) 2629 return; 2630 2631 slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, 2632 num_slices); 2633 2634 bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state, 2635 num_slices, slice_width); 2636 if (!bits_per_pixel) 2637 return; 2638 2639 pps_param[0] = slice_height & 0xFF; 2640 pps_param[1] = slice_height >> 8; 2641 pps_param[2] = slice_width & 0xFF; 2642 pps_param[3] = slice_width >> 8; 2643 pps_param[4] = bits_per_pixel & 0xFF; 2644 pps_param[5] = (bits_per_pixel >> 8) & 0x3; 2645 2646 ret = drm_dp_pcon_pps_override_param(&intel_dp->aux, pps_param); 2647 if (ret < 0) 2648 drm_dbg_kms(&i915->drm, "Failed to set pcon DSC\n"); 2649 } 2650 2651 void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, 2652 const struct intel_crtc_state *crtc_state) 2653 { 2654 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2655 u8 tmp; 2656 2657 if (intel_dp->dpcd[DP_DPCD_REV] < 0x13) 2658 return; 2659 2660 if (!drm_dp_is_branch(intel_dp->dpcd)) 2661 return; 2662 2663 tmp = intel_dp->has_hdmi_sink ? 2664 DP_HDMI_DVI_OUTPUT_CONFIG : 0; 2665 2666 if (drm_dp_dpcd_writeb(&intel_dp->aux, 2667 DP_PROTOCOL_CONVERTER_CONTROL_0, tmp) != 1) 2668 drm_dbg_kms(&i915->drm, "Failed to %s protocol converter HDMI mode\n", 2669 str_enable_disable(intel_dp->has_hdmi_sink)); 2670 2671 tmp = crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 && 2672 intel_dp->dfp.ycbcr_444_to_420 ? DP_CONVERSION_TO_YCBCR420_ENABLE : 0; 2673 2674 if (drm_dp_dpcd_writeb(&intel_dp->aux, 2675 DP_PROTOCOL_CONVERTER_CONTROL_1, tmp) != 1) 2676 drm_dbg_kms(&i915->drm, 2677 "Failed to %s protocol converter YCbCr 4:2:0 conversion mode\n", 2678 str_enable_disable(intel_dp->dfp.ycbcr_444_to_420)); 2679 2680 tmp = intel_dp->dfp.rgb_to_ycbcr ? 2681 DP_CONVERSION_BT709_RGB_YCBCR_ENABLE : 0; 2682 2683 if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) < 0) 2684 drm_dbg_kms(&i915->drm, 2685 "Failed to %s protocol converter RGB->YCbCr conversion mode\n", 2686 str_enable_disable(tmp)); 2687 } 2688 2689 2690 bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp) 2691 { 2692 u8 dprx = 0; 2693 2694 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_DPRX_FEATURE_ENUMERATION_LIST, 2695 &dprx) != 1) 2696 return false; 2697 return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED; 2698 } 2699 2700 static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp) 2701 { 2702 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2703 2704 /* 2705 * Clear the cached register set to avoid using stale values 2706 * for the sinks that do not support DSC. 2707 */ 2708 memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd)); 2709 2710 /* Clear fec_capable to avoid using stale values */ 2711 intel_dp->fec_capable = 0; 2712 2713 /* Cache the DSC DPCD if eDP or DP rev >= 1.4 */ 2714 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x14 || 2715 intel_dp->edp_dpcd[0] >= DP_EDP_14) { 2716 if (drm_dp_dpcd_read(&intel_dp->aux, DP_DSC_SUPPORT, 2717 intel_dp->dsc_dpcd, 2718 sizeof(intel_dp->dsc_dpcd)) < 0) 2719 drm_err(&i915->drm, 2720 "Failed to read DPCD register 0x%x\n", 2721 DP_DSC_SUPPORT); 2722 2723 drm_dbg_kms(&i915->drm, "DSC DPCD: %*ph\n", 2724 (int)sizeof(intel_dp->dsc_dpcd), 2725 intel_dp->dsc_dpcd); 2726 2727 /* FEC is supported only on DP 1.4 */ 2728 if (!intel_dp_is_edp(intel_dp) && 2729 drm_dp_dpcd_readb(&intel_dp->aux, DP_FEC_CAPABILITY, 2730 &intel_dp->fec_capable) < 0) 2731 drm_err(&i915->drm, 2732 "Failed to read FEC DPCD register\n"); 2733 2734 drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n", 2735 intel_dp->fec_capable); 2736 } 2737 } 2738 2739 static void intel_edp_mso_mode_fixup(struct intel_connector *connector, 2740 struct drm_display_mode *mode) 2741 { 2742 struct intel_dp *intel_dp = intel_attached_dp(connector); 2743 struct drm_i915_private *i915 = to_i915(connector->base.dev); 2744 int n = intel_dp->mso_link_count; 2745 int overlap = intel_dp->mso_pixel_overlap; 2746 2747 if (!mode || !n) 2748 return; 2749 2750 mode->hdisplay = (mode->hdisplay - overlap) * n; 2751 mode->hsync_start = (mode->hsync_start - overlap) * n; 2752 mode->hsync_end = (mode->hsync_end - overlap) * n; 2753 mode->htotal = (mode->htotal - overlap) * n; 2754 mode->clock *= n; 2755 2756 drm_mode_set_name(mode); 2757 2758 drm_dbg_kms(&i915->drm, 2759 "[CONNECTOR:%d:%s] using generated MSO mode: " DRM_MODE_FMT "\n", 2760 connector->base.base.id, connector->base.name, 2761 DRM_MODE_ARG(mode)); 2762 } 2763 2764 void intel_edp_fixup_vbt_bpp(struct intel_encoder *encoder, int pipe_bpp) 2765 { 2766 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 2767 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2768 struct intel_connector *connector = intel_dp->attached_connector; 2769 2770 if (connector->panel.vbt.edp.bpp && pipe_bpp > connector->panel.vbt.edp.bpp) { 2771 /* 2772 * This is a big fat ugly hack. 2773 * 2774 * Some machines in UEFI boot mode provide us a VBT that has 18 2775 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons 2776 * unknown we fail to light up. Yet the same BIOS boots up with 2777 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as 2778 * max, not what it tells us to use. 2779 * 2780 * Note: This will still be broken if the eDP panel is not lit 2781 * up by the BIOS, and thus we can't get the mode at module 2782 * load. 2783 */ 2784 drm_dbg_kms(&dev_priv->drm, 2785 "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", 2786 pipe_bpp, connector->panel.vbt.edp.bpp); 2787 connector->panel.vbt.edp.bpp = pipe_bpp; 2788 } 2789 } 2790 2791 static void intel_edp_mso_init(struct intel_dp *intel_dp) 2792 { 2793 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2794 struct intel_connector *connector = intel_dp->attached_connector; 2795 struct drm_display_info *info = &connector->base.display_info; 2796 u8 mso; 2797 2798 if (intel_dp->edp_dpcd[0] < DP_EDP_14) 2799 return; 2800 2801 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_MSO_LINK_CAPABILITIES, &mso) != 1) { 2802 drm_err(&i915->drm, "Failed to read MSO cap\n"); 2803 return; 2804 } 2805 2806 /* Valid configurations are SST or MSO 2x1, 2x2, 4x1 */ 2807 mso &= DP_EDP_MSO_NUMBER_OF_LINKS_MASK; 2808 if (mso % 2 || mso > drm_dp_max_lane_count(intel_dp->dpcd)) { 2809 drm_err(&i915->drm, "Invalid MSO link count cap %u\n", mso); 2810 mso = 0; 2811 } 2812 2813 if (mso) { 2814 drm_dbg_kms(&i915->drm, "Sink MSO %ux%u configuration, pixel overlap %u\n", 2815 mso, drm_dp_max_lane_count(intel_dp->dpcd) / mso, 2816 info->mso_pixel_overlap); 2817 if (!HAS_MSO(i915)) { 2818 drm_err(&i915->drm, "No source MSO support, disabling\n"); 2819 mso = 0; 2820 } 2821 } 2822 2823 intel_dp->mso_link_count = mso; 2824 intel_dp->mso_pixel_overlap = mso ? info->mso_pixel_overlap : 0; 2825 } 2826 2827 static bool 2828 intel_edp_init_dpcd(struct intel_dp *intel_dp) 2829 { 2830 struct drm_i915_private *dev_priv = 2831 to_i915(dp_to_dig_port(intel_dp)->base.base.dev); 2832 2833 /* this function is meant to be called only once */ 2834 drm_WARN_ON(&dev_priv->drm, intel_dp->dpcd[DP_DPCD_REV] != 0); 2835 2836 if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd) != 0) 2837 return false; 2838 2839 drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, 2840 drm_dp_is_branch(intel_dp->dpcd)); 2841 2842 /* 2843 * Read the eDP display control registers. 2844 * 2845 * Do this independent of DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in 2846 * DP_EDP_CONFIGURATION_CAP, because some buggy displays do not have it 2847 * set, but require eDP 1.4+ detection (e.g. for supported link rates 2848 * method). The display control registers should read zero if they're 2849 * not supported anyway. 2850 */ 2851 if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, 2852 intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == 2853 sizeof(intel_dp->edp_dpcd)) { 2854 drm_dbg_kms(&dev_priv->drm, "eDP DPCD: %*ph\n", 2855 (int)sizeof(intel_dp->edp_dpcd), 2856 intel_dp->edp_dpcd); 2857 2858 intel_dp->use_max_params = intel_dp->edp_dpcd[0] < DP_EDP_14; 2859 } 2860 2861 /* 2862 * This has to be called after intel_dp->edp_dpcd is filled, PSR checks 2863 * for SET_POWER_CAPABLE bit in intel_dp->edp_dpcd[1] 2864 */ 2865 intel_psr_init_dpcd(intel_dp); 2866 2867 /* Clear the default sink rates */ 2868 intel_dp->num_sink_rates = 0; 2869 2870 /* Read the eDP 1.4+ supported link rates. */ 2871 if (intel_dp->edp_dpcd[0] >= DP_EDP_14) { 2872 __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; 2873 int i; 2874 2875 drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES, 2876 sink_rates, sizeof(sink_rates)); 2877 2878 for (i = 0; i < ARRAY_SIZE(sink_rates); i++) { 2879 int val = le16_to_cpu(sink_rates[i]); 2880 2881 if (val == 0) 2882 break; 2883 2884 /* Value read multiplied by 200kHz gives the per-lane 2885 * link rate in kHz. The source rates are, however, 2886 * stored in terms of LS_Clk kHz. The full conversion 2887 * back to symbols is 2888 * (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte) 2889 */ 2890 intel_dp->sink_rates[i] = (val * 200) / 10; 2891 } 2892 intel_dp->num_sink_rates = i; 2893 } 2894 2895 /* 2896 * Use DP_LINK_RATE_SET if DP_SUPPORTED_LINK_RATES are available, 2897 * default to DP_MAX_LINK_RATE and DP_LINK_BW_SET otherwise. 2898 */ 2899 if (intel_dp->num_sink_rates) 2900 intel_dp->use_rate_select = true; 2901 else 2902 intel_dp_set_sink_rates(intel_dp); 2903 intel_dp_set_max_sink_lane_count(intel_dp); 2904 2905 /* Read the eDP DSC DPCD registers */ 2906 if (DISPLAY_VER(dev_priv) >= 10) 2907 intel_dp_get_dsc_sink_cap(intel_dp); 2908 2909 /* 2910 * If needed, program our source OUI so we can make various Intel-specific AUX services 2911 * available (such as HDR backlight controls) 2912 */ 2913 intel_edp_init_source_oui(intel_dp, true); 2914 2915 return true; 2916 } 2917 2918 static bool 2919 intel_dp_has_sink_count(struct intel_dp *intel_dp) 2920 { 2921 if (!intel_dp->attached_connector) 2922 return false; 2923 2924 return drm_dp_read_sink_count_cap(&intel_dp->attached_connector->base, 2925 intel_dp->dpcd, 2926 &intel_dp->desc); 2927 } 2928 2929 static bool 2930 intel_dp_get_dpcd(struct intel_dp *intel_dp) 2931 { 2932 int ret; 2933 2934 if (intel_dp_init_lttpr_and_dprx_caps(intel_dp) < 0) 2935 return false; 2936 2937 /* 2938 * Don't clobber cached eDP rates. Also skip re-reading 2939 * the OUI/ID since we know it won't change. 2940 */ 2941 if (!intel_dp_is_edp(intel_dp)) { 2942 drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, 2943 drm_dp_is_branch(intel_dp->dpcd)); 2944 2945 intel_dp_set_sink_rates(intel_dp); 2946 intel_dp_set_max_sink_lane_count(intel_dp); 2947 intel_dp_set_common_rates(intel_dp); 2948 } 2949 2950 if (intel_dp_has_sink_count(intel_dp)) { 2951 ret = drm_dp_read_sink_count(&intel_dp->aux); 2952 if (ret < 0) 2953 return false; 2954 2955 /* 2956 * Sink count can change between short pulse hpd hence 2957 * a member variable in intel_dp will track any changes 2958 * between short pulse interrupts. 2959 */ 2960 intel_dp->sink_count = ret; 2961 2962 /* 2963 * SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that 2964 * a dongle is present but no display. Unless we require to know 2965 * if a dongle is present or not, we don't need to update 2966 * downstream port information. So, an early return here saves 2967 * time from performing other operations which are not required. 2968 */ 2969 if (!intel_dp->sink_count) 2970 return false; 2971 } 2972 2973 return drm_dp_read_downstream_info(&intel_dp->aux, intel_dp->dpcd, 2974 intel_dp->downstream_ports) == 0; 2975 } 2976 2977 static bool 2978 intel_dp_can_mst(struct intel_dp *intel_dp) 2979 { 2980 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2981 2982 return i915->params.enable_dp_mst && 2983 intel_dp_mst_source_support(intel_dp) && 2984 drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd); 2985 } 2986 2987 static void 2988 intel_dp_configure_mst(struct intel_dp *intel_dp) 2989 { 2990 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 2991 struct intel_encoder *encoder = 2992 &dp_to_dig_port(intel_dp)->base; 2993 bool sink_can_mst = drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd); 2994 2995 drm_dbg_kms(&i915->drm, 2996 "[ENCODER:%d:%s] MST support: port: %s, sink: %s, modparam: %s\n", 2997 encoder->base.base.id, encoder->base.name, 2998 str_yes_no(intel_dp_mst_source_support(intel_dp)), 2999 str_yes_no(sink_can_mst), 3000 str_yes_no(i915->params.enable_dp_mst)); 3001 3002 if (!intel_dp_mst_source_support(intel_dp)) 3003 return; 3004 3005 intel_dp->is_mst = sink_can_mst && 3006 i915->params.enable_dp_mst; 3007 3008 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, 3009 intel_dp->is_mst); 3010 } 3011 3012 static bool 3013 intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *esi) 3014 { 3015 return drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT_ESI, esi, 4) == 4; 3016 } 3017 3018 static bool intel_dp_ack_sink_irq_esi(struct intel_dp *intel_dp, u8 esi[4]) 3019 { 3020 int retry; 3021 3022 for (retry = 0; retry < 3; retry++) { 3023 if (drm_dp_dpcd_write(&intel_dp->aux, DP_SINK_COUNT_ESI + 1, 3024 &esi[1], 3) == 3) 3025 return true; 3026 } 3027 3028 return false; 3029 } 3030 3031 bool 3032 intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state, 3033 const struct drm_connector_state *conn_state) 3034 { 3035 /* 3036 * As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication 3037 * of Color Encoding Format and Content Color Gamut], in order to 3038 * sending YCBCR 420 or HDR BT.2020 signals we should use DP VSC SDP. 3039 */ 3040 if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) 3041 return true; 3042 3043 switch (conn_state->colorspace) { 3044 case DRM_MODE_COLORIMETRY_SYCC_601: 3045 case DRM_MODE_COLORIMETRY_OPYCC_601: 3046 case DRM_MODE_COLORIMETRY_BT2020_YCC: 3047 case DRM_MODE_COLORIMETRY_BT2020_RGB: 3048 case DRM_MODE_COLORIMETRY_BT2020_CYCC: 3049 return true; 3050 default: 3051 break; 3052 } 3053 3054 return false; 3055 } 3056 3057 static ssize_t intel_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc, 3058 struct dp_sdp *sdp, size_t size) 3059 { 3060 size_t length = sizeof(struct dp_sdp); 3061 3062 if (size < length) 3063 return -ENOSPC; 3064 3065 memset(sdp, 0, size); 3066 3067 /* 3068 * Prepare VSC Header for SU as per DP 1.4a spec, Table 2-119 3069 * VSC SDP Header Bytes 3070 */ 3071 sdp->sdp_header.HB0 = 0; /* Secondary-Data Packet ID = 0 */ 3072 sdp->sdp_header.HB1 = vsc->sdp_type; /* Secondary-data Packet Type */ 3073 sdp->sdp_header.HB2 = vsc->revision; /* Revision Number */ 3074 sdp->sdp_header.HB3 = vsc->length; /* Number of Valid Data Bytes */ 3075 3076 /* 3077 * Only revision 0x5 supports Pixel Encoding/Colorimetry Format as 3078 * per DP 1.4a spec. 3079 */ 3080 if (vsc->revision != 0x5) 3081 goto out; 3082 3083 /* VSC SDP Payload for DB16 through DB18 */ 3084 /* Pixel Encoding and Colorimetry Formats */ 3085 sdp->db[16] = (vsc->pixelformat & 0xf) << 4; /* DB16[7:4] */ 3086 sdp->db[16] |= vsc->colorimetry & 0xf; /* DB16[3:0] */ 3087 3088 switch (vsc->bpc) { 3089 case 6: 3090 /* 6bpc: 0x0 */ 3091 break; 3092 case 8: 3093 sdp->db[17] = 0x1; /* DB17[3:0] */ 3094 break; 3095 case 10: 3096 sdp->db[17] = 0x2; 3097 break; 3098 case 12: 3099 sdp->db[17] = 0x3; 3100 break; 3101 case 16: 3102 sdp->db[17] = 0x4; 3103 break; 3104 default: 3105 MISSING_CASE(vsc->bpc); 3106 break; 3107 } 3108 /* Dynamic Range and Component Bit Depth */ 3109 if (vsc->dynamic_range == DP_DYNAMIC_RANGE_CTA) 3110 sdp->db[17] |= 0x80; /* DB17[7] */ 3111 3112 /* Content Type */ 3113 sdp->db[18] = vsc->content_type & 0x7; 3114 3115 out: 3116 return length; 3117 } 3118 3119 static ssize_t 3120 intel_dp_hdr_metadata_infoframe_sdp_pack(struct drm_i915_private *i915, 3121 const struct hdmi_drm_infoframe *drm_infoframe, 3122 struct dp_sdp *sdp, 3123 size_t size) 3124 { 3125 size_t length = sizeof(struct dp_sdp); 3126 const int infoframe_size = HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE; 3127 unsigned char buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE]; 3128 ssize_t len; 3129 3130 if (size < length) 3131 return -ENOSPC; 3132 3133 memset(sdp, 0, size); 3134 3135 len = hdmi_drm_infoframe_pack_only(drm_infoframe, buf, sizeof(buf)); 3136 if (len < 0) { 3137 drm_dbg_kms(&i915->drm, "buffer size is smaller than hdr metadata infoframe\n"); 3138 return -ENOSPC; 3139 } 3140 3141 if (len != infoframe_size) { 3142 drm_dbg_kms(&i915->drm, "wrong static hdr metadata size\n"); 3143 return -ENOSPC; 3144 } 3145 3146 /* 3147 * Set up the infoframe sdp packet for HDR static metadata. 3148 * Prepare VSC Header for SU as per DP 1.4a spec, 3149 * Table 2-100 and Table 2-101 3150 */ 3151 3152 /* Secondary-Data Packet ID, 00h for non-Audio INFOFRAME */ 3153 sdp->sdp_header.HB0 = 0; 3154 /* 3155 * Packet Type 80h + Non-audio INFOFRAME Type value 3156 * HDMI_INFOFRAME_TYPE_DRM: 0x87 3157 * - 80h + Non-audio INFOFRAME Type value 3158 * - InfoFrame Type: 0x07 3159 * [CTA-861-G Table-42 Dynamic Range and Mastering InfoFrame] 3160 */ 3161 sdp->sdp_header.HB1 = drm_infoframe->type; 3162 /* 3163 * Least Significant Eight Bits of (Data Byte Count – 1) 3164 * infoframe_size - 1 3165 */ 3166 sdp->sdp_header.HB2 = 0x1D; 3167 /* INFOFRAME SDP Version Number */ 3168 sdp->sdp_header.HB3 = (0x13 << 2); 3169 /* CTA Header Byte 2 (INFOFRAME Version Number) */ 3170 sdp->db[0] = drm_infoframe->version; 3171 /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ 3172 sdp->db[1] = drm_infoframe->length; 3173 /* 3174 * Copy HDMI_DRM_INFOFRAME_SIZE size from a buffer after 3175 * HDMI_INFOFRAME_HEADER_SIZE 3176 */ 3177 BUILD_BUG_ON(sizeof(sdp->db) < HDMI_DRM_INFOFRAME_SIZE + 2); 3178 memcpy(&sdp->db[2], &buf[HDMI_INFOFRAME_HEADER_SIZE], 3179 HDMI_DRM_INFOFRAME_SIZE); 3180 3181 /* 3182 * Size of DP infoframe sdp packet for HDR static metadata consists of 3183 * - DP SDP Header(struct dp_sdp_header): 4 bytes 3184 * - Two Data Blocks: 2 bytes 3185 * CTA Header Byte2 (INFOFRAME Version Number) 3186 * CTA Header Byte3 (Length of INFOFRAME) 3187 * - HDMI_DRM_INFOFRAME_SIZE: 26 bytes 3188 * 3189 * Prior to GEN11's GMP register size is identical to DP HDR static metadata 3190 * infoframe size. But GEN11+ has larger than that size, write_infoframe 3191 * will pad rest of the size. 3192 */ 3193 return sizeof(struct dp_sdp_header) + 2 + HDMI_DRM_INFOFRAME_SIZE; 3194 } 3195 3196 static void intel_write_dp_sdp(struct intel_encoder *encoder, 3197 const struct intel_crtc_state *crtc_state, 3198 unsigned int type) 3199 { 3200 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3201 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3202 struct dp_sdp sdp = {}; 3203 ssize_t len; 3204 3205 if ((crtc_state->infoframes.enable & 3206 intel_hdmi_infoframe_enable(type)) == 0) 3207 return; 3208 3209 switch (type) { 3210 case DP_SDP_VSC: 3211 len = intel_dp_vsc_sdp_pack(&crtc_state->infoframes.vsc, &sdp, 3212 sizeof(sdp)); 3213 break; 3214 case HDMI_PACKET_TYPE_GAMUT_METADATA: 3215 len = intel_dp_hdr_metadata_infoframe_sdp_pack(dev_priv, 3216 &crtc_state->infoframes.drm.drm, 3217 &sdp, sizeof(sdp)); 3218 break; 3219 default: 3220 MISSING_CASE(type); 3221 return; 3222 } 3223 3224 if (drm_WARN_ON(&dev_priv->drm, len < 0)) 3225 return; 3226 3227 dig_port->write_infoframe(encoder, crtc_state, type, &sdp, len); 3228 } 3229 3230 void intel_write_dp_vsc_sdp(struct intel_encoder *encoder, 3231 const struct intel_crtc_state *crtc_state, 3232 const struct drm_dp_vsc_sdp *vsc) 3233 { 3234 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3235 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3236 struct dp_sdp sdp = {}; 3237 ssize_t len; 3238 3239 len = intel_dp_vsc_sdp_pack(vsc, &sdp, sizeof(sdp)); 3240 3241 if (drm_WARN_ON(&dev_priv->drm, len < 0)) 3242 return; 3243 3244 dig_port->write_infoframe(encoder, crtc_state, DP_SDP_VSC, 3245 &sdp, len); 3246 } 3247 3248 void intel_dp_set_infoframes(struct intel_encoder *encoder, 3249 bool enable, 3250 const struct intel_crtc_state *crtc_state, 3251 const struct drm_connector_state *conn_state) 3252 { 3253 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3254 i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder); 3255 u32 dip_enable = VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_GCP_HSW | 3256 VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW | 3257 VIDEO_DIP_ENABLE_SPD_HSW | VIDEO_DIP_ENABLE_DRM_GLK; 3258 u32 val = intel_de_read(dev_priv, reg) & ~dip_enable; 3259 3260 /* TODO: Add DSC case (DIP_ENABLE_PPS) */ 3261 /* When PSR is enabled, this routine doesn't disable VSC DIP */ 3262 if (!crtc_state->has_psr) 3263 val &= ~VIDEO_DIP_ENABLE_VSC_HSW; 3264 3265 intel_de_write(dev_priv, reg, val); 3266 intel_de_posting_read(dev_priv, reg); 3267 3268 if (!enable) 3269 return; 3270 3271 /* When PSR is enabled, VSC SDP is handled by PSR routine */ 3272 if (!crtc_state->has_psr) 3273 intel_write_dp_sdp(encoder, crtc_state, DP_SDP_VSC); 3274 3275 intel_write_dp_sdp(encoder, crtc_state, HDMI_PACKET_TYPE_GAMUT_METADATA); 3276 } 3277 3278 static int intel_dp_vsc_sdp_unpack(struct drm_dp_vsc_sdp *vsc, 3279 const void *buffer, size_t size) 3280 { 3281 const struct dp_sdp *sdp = buffer; 3282 3283 if (size < sizeof(struct dp_sdp)) 3284 return -EINVAL; 3285 3286 memset(vsc, 0, sizeof(*vsc)); 3287 3288 if (sdp->sdp_header.HB0 != 0) 3289 return -EINVAL; 3290 3291 if (sdp->sdp_header.HB1 != DP_SDP_VSC) 3292 return -EINVAL; 3293 3294 vsc->sdp_type = sdp->sdp_header.HB1; 3295 vsc->revision = sdp->sdp_header.HB2; 3296 vsc->length = sdp->sdp_header.HB3; 3297 3298 if ((sdp->sdp_header.HB2 == 0x2 && sdp->sdp_header.HB3 == 0x8) || 3299 (sdp->sdp_header.HB2 == 0x4 && sdp->sdp_header.HB3 == 0xe)) { 3300 /* 3301 * - HB2 = 0x2, HB3 = 0x8 3302 * VSC SDP supporting 3D stereo + PSR 3303 * - HB2 = 0x4, HB3 = 0xe 3304 * VSC SDP supporting 3D stereo + PSR2 with Y-coordinate of 3305 * first scan line of the SU region (applies to eDP v1.4b 3306 * and higher). 3307 */ 3308 return 0; 3309 } else if (sdp->sdp_header.HB2 == 0x5 && sdp->sdp_header.HB3 == 0x13) { 3310 /* 3311 * - HB2 = 0x5, HB3 = 0x13 3312 * VSC SDP supporting 3D stereo + PSR2 + Pixel Encoding/Colorimetry 3313 * Format. 3314 */ 3315 vsc->pixelformat = (sdp->db[16] >> 4) & 0xf; 3316 vsc->colorimetry = sdp->db[16] & 0xf; 3317 vsc->dynamic_range = (sdp->db[17] >> 7) & 0x1; 3318 3319 switch (sdp->db[17] & 0x7) { 3320 case 0x0: 3321 vsc->bpc = 6; 3322 break; 3323 case 0x1: 3324 vsc->bpc = 8; 3325 break; 3326 case 0x2: 3327 vsc->bpc = 10; 3328 break; 3329 case 0x3: 3330 vsc->bpc = 12; 3331 break; 3332 case 0x4: 3333 vsc->bpc = 16; 3334 break; 3335 default: 3336 MISSING_CASE(sdp->db[17] & 0x7); 3337 return -EINVAL; 3338 } 3339 3340 vsc->content_type = sdp->db[18] & 0x7; 3341 } else { 3342 return -EINVAL; 3343 } 3344 3345 return 0; 3346 } 3347 3348 static int 3349 intel_dp_hdr_metadata_infoframe_sdp_unpack(struct hdmi_drm_infoframe *drm_infoframe, 3350 const void *buffer, size_t size) 3351 { 3352 int ret; 3353 3354 const struct dp_sdp *sdp = buffer; 3355 3356 if (size < sizeof(struct dp_sdp)) 3357 return -EINVAL; 3358 3359 if (sdp->sdp_header.HB0 != 0) 3360 return -EINVAL; 3361 3362 if (sdp->sdp_header.HB1 != HDMI_INFOFRAME_TYPE_DRM) 3363 return -EINVAL; 3364 3365 /* 3366 * Least Significant Eight Bits of (Data Byte Count – 1) 3367 * 1Dh (i.e., Data Byte Count = 30 bytes). 3368 */ 3369 if (sdp->sdp_header.HB2 != 0x1D) 3370 return -EINVAL; 3371 3372 /* Most Significant Two Bits of (Data Byte Count – 1), Clear to 00b. */ 3373 if ((sdp->sdp_header.HB3 & 0x3) != 0) 3374 return -EINVAL; 3375 3376 /* INFOFRAME SDP Version Number */ 3377 if (((sdp->sdp_header.HB3 >> 2) & 0x3f) != 0x13) 3378 return -EINVAL; 3379 3380 /* CTA Header Byte 2 (INFOFRAME Version Number) */ 3381 if (sdp->db[0] != 1) 3382 return -EINVAL; 3383 3384 /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ 3385 if (sdp->db[1] != HDMI_DRM_INFOFRAME_SIZE) 3386 return -EINVAL; 3387 3388 ret = hdmi_drm_infoframe_unpack_only(drm_infoframe, &sdp->db[2], 3389 HDMI_DRM_INFOFRAME_SIZE); 3390 3391 return ret; 3392 } 3393 3394 static void intel_read_dp_vsc_sdp(struct intel_encoder *encoder, 3395 struct intel_crtc_state *crtc_state, 3396 struct drm_dp_vsc_sdp *vsc) 3397 { 3398 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3399 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3400 unsigned int type = DP_SDP_VSC; 3401 struct dp_sdp sdp = {}; 3402 int ret; 3403 3404 /* When PSR is enabled, VSC SDP is handled by PSR routine */ 3405 if (crtc_state->has_psr) 3406 return; 3407 3408 if ((crtc_state->infoframes.enable & 3409 intel_hdmi_infoframe_enable(type)) == 0) 3410 return; 3411 3412 dig_port->read_infoframe(encoder, crtc_state, type, &sdp, sizeof(sdp)); 3413 3414 ret = intel_dp_vsc_sdp_unpack(vsc, &sdp, sizeof(sdp)); 3415 3416 if (ret) 3417 drm_dbg_kms(&dev_priv->drm, "Failed to unpack DP VSC SDP\n"); 3418 } 3419 3420 static void intel_read_dp_hdr_metadata_infoframe_sdp(struct intel_encoder *encoder, 3421 struct intel_crtc_state *crtc_state, 3422 struct hdmi_drm_infoframe *drm_infoframe) 3423 { 3424 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 3425 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 3426 unsigned int type = HDMI_PACKET_TYPE_GAMUT_METADATA; 3427 struct dp_sdp sdp = {}; 3428 int ret; 3429 3430 if ((crtc_state->infoframes.enable & 3431 intel_hdmi_infoframe_enable(type)) == 0) 3432 return; 3433 3434 dig_port->read_infoframe(encoder, crtc_state, type, &sdp, 3435 sizeof(sdp)); 3436 3437 ret = intel_dp_hdr_metadata_infoframe_sdp_unpack(drm_infoframe, &sdp, 3438 sizeof(sdp)); 3439 3440 if (ret) 3441 drm_dbg_kms(&dev_priv->drm, 3442 "Failed to unpack DP HDR Metadata Infoframe SDP\n"); 3443 } 3444 3445 void intel_read_dp_sdp(struct intel_encoder *encoder, 3446 struct intel_crtc_state *crtc_state, 3447 unsigned int type) 3448 { 3449 switch (type) { 3450 case DP_SDP_VSC: 3451 intel_read_dp_vsc_sdp(encoder, crtc_state, 3452 &crtc_state->infoframes.vsc); 3453 break; 3454 case HDMI_PACKET_TYPE_GAMUT_METADATA: 3455 intel_read_dp_hdr_metadata_infoframe_sdp(encoder, crtc_state, 3456 &crtc_state->infoframes.drm.drm); 3457 break; 3458 default: 3459 MISSING_CASE(type); 3460 break; 3461 } 3462 } 3463 3464 static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp) 3465 { 3466 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3467 int status = 0; 3468 int test_link_rate; 3469 u8 test_lane_count, test_link_bw; 3470 /* (DP CTS 1.2) 3471 * 4.3.1.11 3472 */ 3473 /* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */ 3474 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT, 3475 &test_lane_count); 3476 3477 if (status <= 0) { 3478 drm_dbg_kms(&i915->drm, "Lane count read failed\n"); 3479 return DP_TEST_NAK; 3480 } 3481 test_lane_count &= DP_MAX_LANE_COUNT_MASK; 3482 3483 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE, 3484 &test_link_bw); 3485 if (status <= 0) { 3486 drm_dbg_kms(&i915->drm, "Link Rate read failed\n"); 3487 return DP_TEST_NAK; 3488 } 3489 test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw); 3490 3491 /* Validate the requested link rate and lane count */ 3492 if (!intel_dp_link_params_valid(intel_dp, test_link_rate, 3493 test_lane_count)) 3494 return DP_TEST_NAK; 3495 3496 intel_dp->compliance.test_lane_count = test_lane_count; 3497 intel_dp->compliance.test_link_rate = test_link_rate; 3498 3499 return DP_TEST_ACK; 3500 } 3501 3502 static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp) 3503 { 3504 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3505 u8 test_pattern; 3506 u8 test_misc; 3507 __be16 h_width, v_height; 3508 int status = 0; 3509 3510 /* Read the TEST_PATTERN (DP CTS 3.1.5) */ 3511 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN, 3512 &test_pattern); 3513 if (status <= 0) { 3514 drm_dbg_kms(&i915->drm, "Test pattern read failed\n"); 3515 return DP_TEST_NAK; 3516 } 3517 if (test_pattern != DP_COLOR_RAMP) 3518 return DP_TEST_NAK; 3519 3520 status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI, 3521 &h_width, 2); 3522 if (status <= 0) { 3523 drm_dbg_kms(&i915->drm, "H Width read failed\n"); 3524 return DP_TEST_NAK; 3525 } 3526 3527 status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI, 3528 &v_height, 2); 3529 if (status <= 0) { 3530 drm_dbg_kms(&i915->drm, "V Height read failed\n"); 3531 return DP_TEST_NAK; 3532 } 3533 3534 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0, 3535 &test_misc); 3536 if (status <= 0) { 3537 drm_dbg_kms(&i915->drm, "TEST MISC read failed\n"); 3538 return DP_TEST_NAK; 3539 } 3540 if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB) 3541 return DP_TEST_NAK; 3542 if (test_misc & DP_TEST_DYNAMIC_RANGE_CEA) 3543 return DP_TEST_NAK; 3544 switch (test_misc & DP_TEST_BIT_DEPTH_MASK) { 3545 case DP_TEST_BIT_DEPTH_6: 3546 intel_dp->compliance.test_data.bpc = 6; 3547 break; 3548 case DP_TEST_BIT_DEPTH_8: 3549 intel_dp->compliance.test_data.bpc = 8; 3550 break; 3551 default: 3552 return DP_TEST_NAK; 3553 } 3554 3555 intel_dp->compliance.test_data.video_pattern = test_pattern; 3556 intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width); 3557 intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height); 3558 /* Set test active flag here so userspace doesn't interrupt things */ 3559 intel_dp->compliance.test_active = true; 3560 3561 return DP_TEST_ACK; 3562 } 3563 3564 static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp) 3565 { 3566 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3567 u8 test_result = DP_TEST_ACK; 3568 struct intel_connector *intel_connector = intel_dp->attached_connector; 3569 struct drm_connector *connector = &intel_connector->base; 3570 3571 if (intel_connector->detect_edid == NULL || 3572 connector->edid_corrupt || 3573 intel_dp->aux.i2c_defer_count > 6) { 3574 /* Check EDID read for NACKs, DEFERs and corruption 3575 * (DP CTS 1.2 Core r1.1) 3576 * 4.2.2.4 : Failed EDID read, I2C_NAK 3577 * 4.2.2.5 : Failed EDID read, I2C_DEFER 3578 * 4.2.2.6 : EDID corruption detected 3579 * Use failsafe mode for all cases 3580 */ 3581 if (intel_dp->aux.i2c_nack_count > 0 || 3582 intel_dp->aux.i2c_defer_count > 0) 3583 drm_dbg_kms(&i915->drm, 3584 "EDID read had %d NACKs, %d DEFERs\n", 3585 intel_dp->aux.i2c_nack_count, 3586 intel_dp->aux.i2c_defer_count); 3587 intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE; 3588 } else { 3589 struct edid *block = intel_connector->detect_edid; 3590 3591 /* We have to write the checksum 3592 * of the last block read 3593 */ 3594 block += intel_connector->detect_edid->extensions; 3595 3596 if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM, 3597 block->checksum) <= 0) 3598 drm_dbg_kms(&i915->drm, 3599 "Failed to write EDID checksum\n"); 3600 3601 test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE; 3602 intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED; 3603 } 3604 3605 /* Set test active flag here so userspace doesn't interrupt things */ 3606 intel_dp->compliance.test_active = true; 3607 3608 return test_result; 3609 } 3610 3611 static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp, 3612 const struct intel_crtc_state *crtc_state) 3613 { 3614 struct drm_i915_private *dev_priv = 3615 to_i915(dp_to_dig_port(intel_dp)->base.base.dev); 3616 struct drm_dp_phy_test_params *data = 3617 &intel_dp->compliance.test_data.phytest; 3618 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 3619 enum pipe pipe = crtc->pipe; 3620 u32 pattern_val; 3621 3622 switch (data->phy_pattern) { 3623 case DP_PHY_TEST_PATTERN_NONE: 3624 drm_dbg_kms(&dev_priv->drm, "Disable Phy Test Pattern\n"); 3625 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0); 3626 break; 3627 case DP_PHY_TEST_PATTERN_D10_2: 3628 drm_dbg_kms(&dev_priv->drm, "Set D10.2 Phy Test Pattern\n"); 3629 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3630 DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2); 3631 break; 3632 case DP_PHY_TEST_PATTERN_ERROR_COUNT: 3633 drm_dbg_kms(&dev_priv->drm, "Set Error Count Phy Test Pattern\n"); 3634 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3635 DDI_DP_COMP_CTL_ENABLE | 3636 DDI_DP_COMP_CTL_SCRAMBLED_0); 3637 break; 3638 case DP_PHY_TEST_PATTERN_PRBS7: 3639 drm_dbg_kms(&dev_priv->drm, "Set PRBS7 Phy Test Pattern\n"); 3640 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3641 DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7); 3642 break; 3643 case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: 3644 /* 3645 * FIXME: Ideally pattern should come from DPCD 0x250. As 3646 * current firmware of DPR-100 could not set it, so hardcoding 3647 * now for complaince test. 3648 */ 3649 drm_dbg_kms(&dev_priv->drm, 3650 "Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n"); 3651 pattern_val = 0x3e0f83e0; 3652 intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val); 3653 pattern_val = 0x0f83e0f8; 3654 intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val); 3655 pattern_val = 0x0000f83e; 3656 intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val); 3657 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3658 DDI_DP_COMP_CTL_ENABLE | 3659 DDI_DP_COMP_CTL_CUSTOM80); 3660 break; 3661 case DP_PHY_TEST_PATTERN_CP2520: 3662 /* 3663 * FIXME: Ideally pattern should come from DPCD 0x24A. As 3664 * current firmware of DPR-100 could not set it, so hardcoding 3665 * now for complaince test. 3666 */ 3667 drm_dbg_kms(&dev_priv->drm, "Set HBR2 compliance Phy Test Pattern\n"); 3668 pattern_val = 0xFB; 3669 intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 3670 DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 | 3671 pattern_val); 3672 break; 3673 default: 3674 WARN(1, "Invalid Phy Test Pattern\n"); 3675 } 3676 } 3677 3678 static void 3679 intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp, 3680 const struct intel_crtc_state *crtc_state) 3681 { 3682 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 3683 struct drm_device *dev = dig_port->base.base.dev; 3684 struct drm_i915_private *dev_priv = to_i915(dev); 3685 struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); 3686 enum pipe pipe = crtc->pipe; 3687 u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value; 3688 3689 trans_ddi_func_ctl_value = intel_de_read(dev_priv, 3690 TRANS_DDI_FUNC_CTL(pipe)); 3691 trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe)); 3692 dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe)); 3693 3694 trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE | 3695 TGL_TRANS_DDI_PORT_MASK); 3696 trans_conf_value &= ~PIPECONF_ENABLE; 3697 dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE; 3698 3699 intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value); 3700 intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe), 3701 trans_ddi_func_ctl_value); 3702 intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value); 3703 } 3704 3705 static void 3706 intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp, 3707 const struct intel_crtc_state *crtc_state) 3708 { 3709 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 3710 struct drm_device *dev = dig_port->base.base.dev; 3711 struct drm_i915_private *dev_priv = to_i915(dev); 3712 enum port port = dig_port->base.port; 3713 struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); 3714 enum pipe pipe = crtc->pipe; 3715 u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value; 3716 3717 trans_ddi_func_ctl_value = intel_de_read(dev_priv, 3718 TRANS_DDI_FUNC_CTL(pipe)); 3719 trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe)); 3720 dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe)); 3721 3722 trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE | 3723 TGL_TRANS_DDI_SELECT_PORT(port); 3724 trans_conf_value |= PIPECONF_ENABLE; 3725 dp_tp_ctl_value |= DP_TP_CTL_ENABLE; 3726 3727 intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value); 3728 intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value); 3729 intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe), 3730 trans_ddi_func_ctl_value); 3731 } 3732 3733 static void intel_dp_process_phy_request(struct intel_dp *intel_dp, 3734 const struct intel_crtc_state *crtc_state) 3735 { 3736 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3737 struct drm_dp_phy_test_params *data = 3738 &intel_dp->compliance.test_data.phytest; 3739 u8 link_status[DP_LINK_STATUS_SIZE]; 3740 3741 if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX, 3742 link_status) < 0) { 3743 drm_dbg_kms(&i915->drm, "failed to get link status\n"); 3744 return; 3745 } 3746 3747 /* retrieve vswing & pre-emphasis setting */ 3748 intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, 3749 link_status); 3750 3751 intel_dp_autotest_phy_ddi_disable(intel_dp, crtc_state); 3752 3753 intel_dp_set_signal_levels(intel_dp, crtc_state, DP_PHY_DPRX); 3754 3755 intel_dp_phy_pattern_update(intel_dp, crtc_state); 3756 3757 intel_dp_autotest_phy_ddi_enable(intel_dp, crtc_state); 3758 3759 drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET, 3760 intel_dp->train_set, crtc_state->lane_count); 3761 3762 drm_dp_set_phy_test_pattern(&intel_dp->aux, data, 3763 link_status[DP_DPCD_REV]); 3764 } 3765 3766 static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp) 3767 { 3768 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3769 struct drm_dp_phy_test_params *data = 3770 &intel_dp->compliance.test_data.phytest; 3771 3772 if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) { 3773 drm_dbg_kms(&i915->drm, "DP Phy Test pattern AUX read failure\n"); 3774 return DP_TEST_NAK; 3775 } 3776 3777 /* Set test active flag here so userspace doesn't interrupt things */ 3778 intel_dp->compliance.test_active = true; 3779 3780 return DP_TEST_ACK; 3781 } 3782 3783 static void intel_dp_handle_test_request(struct intel_dp *intel_dp) 3784 { 3785 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3786 u8 response = DP_TEST_NAK; 3787 u8 request = 0; 3788 int status; 3789 3790 status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request); 3791 if (status <= 0) { 3792 drm_dbg_kms(&i915->drm, 3793 "Could not read test request from sink\n"); 3794 goto update_status; 3795 } 3796 3797 switch (request) { 3798 case DP_TEST_LINK_TRAINING: 3799 drm_dbg_kms(&i915->drm, "LINK_TRAINING test requested\n"); 3800 response = intel_dp_autotest_link_training(intel_dp); 3801 break; 3802 case DP_TEST_LINK_VIDEO_PATTERN: 3803 drm_dbg_kms(&i915->drm, "TEST_PATTERN test requested\n"); 3804 response = intel_dp_autotest_video_pattern(intel_dp); 3805 break; 3806 case DP_TEST_LINK_EDID_READ: 3807 drm_dbg_kms(&i915->drm, "EDID test requested\n"); 3808 response = intel_dp_autotest_edid(intel_dp); 3809 break; 3810 case DP_TEST_LINK_PHY_TEST_PATTERN: 3811 drm_dbg_kms(&i915->drm, "PHY_PATTERN test requested\n"); 3812 response = intel_dp_autotest_phy_pattern(intel_dp); 3813 break; 3814 default: 3815 drm_dbg_kms(&i915->drm, "Invalid test request '%02x'\n", 3816 request); 3817 break; 3818 } 3819 3820 if (response & DP_TEST_ACK) 3821 intel_dp->compliance.test_type = request; 3822 3823 update_status: 3824 status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response); 3825 if (status <= 0) 3826 drm_dbg_kms(&i915->drm, 3827 "Could not write test response to sink\n"); 3828 } 3829 3830 static bool intel_dp_link_ok(struct intel_dp *intel_dp, 3831 u8 link_status[DP_LINK_STATUS_SIZE]) 3832 { 3833 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 3834 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 3835 bool uhbr = intel_dp->link_rate >= 1000000; 3836 bool ok; 3837 3838 if (uhbr) 3839 ok = drm_dp_128b132b_lane_channel_eq_done(link_status, 3840 intel_dp->lane_count); 3841 else 3842 ok = drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); 3843 3844 if (ok) 3845 return true; 3846 3847 intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); 3848 drm_dbg_kms(&i915->drm, 3849 "[ENCODER:%d:%s] %s link not ok, retraining\n", 3850 encoder->base.base.id, encoder->base.name, 3851 uhbr ? "128b/132b" : "8b/10b"); 3852 3853 return false; 3854 } 3855 3856 static void 3857 intel_dp_mst_hpd_irq(struct intel_dp *intel_dp, u8 *esi, u8 *ack) 3858 { 3859 bool handled = false; 3860 3861 drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled); 3862 if (handled) 3863 ack[1] |= esi[1] & (DP_DOWN_REP_MSG_RDY | DP_UP_REQ_MSG_RDY); 3864 3865 if (esi[1] & DP_CP_IRQ) { 3866 intel_hdcp_handle_cp_irq(intel_dp->attached_connector); 3867 ack[1] |= DP_CP_IRQ; 3868 } 3869 } 3870 3871 static bool intel_dp_mst_link_status(struct intel_dp *intel_dp) 3872 { 3873 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 3874 struct drm_i915_private *i915 = to_i915(encoder->base.dev); 3875 u8 link_status[DP_LINK_STATUS_SIZE] = {}; 3876 const size_t esi_link_status_size = DP_LINK_STATUS_SIZE - 2; 3877 3878 if (drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS_ESI, link_status, 3879 esi_link_status_size) != esi_link_status_size) { 3880 drm_err(&i915->drm, 3881 "[ENCODER:%d:%s] Failed to read link status\n", 3882 encoder->base.base.id, encoder->base.name); 3883 return false; 3884 } 3885 3886 return intel_dp_link_ok(intel_dp, link_status); 3887 } 3888 3889 /** 3890 * intel_dp_check_mst_status - service any pending MST interrupts, check link status 3891 * @intel_dp: Intel DP struct 3892 * 3893 * Read any pending MST interrupts, call MST core to handle these and ack the 3894 * interrupts. Check if the main and AUX link state is ok. 3895 * 3896 * Returns: 3897 * - %true if pending interrupts were serviced (or no interrupts were 3898 * pending) w/o detecting an error condition. 3899 * - %false if an error condition - like AUX failure or a loss of link - is 3900 * detected, which needs servicing from the hotplug work. 3901 */ 3902 static bool 3903 intel_dp_check_mst_status(struct intel_dp *intel_dp) 3904 { 3905 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 3906 bool link_ok = true; 3907 3908 drm_WARN_ON_ONCE(&i915->drm, intel_dp->active_mst_links < 0); 3909 3910 for (;;) { 3911 u8 esi[4] = {}; 3912 u8 ack[4] = {}; 3913 3914 if (!intel_dp_get_sink_irq_esi(intel_dp, esi)) { 3915 drm_dbg_kms(&i915->drm, 3916 "failed to get ESI - device may have failed\n"); 3917 link_ok = false; 3918 3919 break; 3920 } 3921 3922 drm_dbg_kms(&i915->drm, "DPRX ESI: %4ph\n", esi); 3923 3924 if (intel_dp->active_mst_links > 0 && link_ok && 3925 esi[3] & LINK_STATUS_CHANGED) { 3926 if (!intel_dp_mst_link_status(intel_dp)) 3927 link_ok = false; 3928 ack[3] |= LINK_STATUS_CHANGED; 3929 } 3930 3931 intel_dp_mst_hpd_irq(intel_dp, esi, ack); 3932 3933 if (!memchr_inv(ack, 0, sizeof(ack))) 3934 break; 3935 3936 if (!intel_dp_ack_sink_irq_esi(intel_dp, ack)) 3937 drm_dbg_kms(&i915->drm, "Failed to ack ESI\n"); 3938 } 3939 3940 return link_ok; 3941 } 3942 3943 static void 3944 intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp) 3945 { 3946 bool is_active; 3947 u8 buf = 0; 3948 3949 is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux); 3950 if (intel_dp->frl.is_trained && !is_active) { 3951 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf) < 0) 3952 return; 3953 3954 buf &= ~DP_PCON_ENABLE_HDMI_LINK; 3955 if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf) < 0) 3956 return; 3957 3958 drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base); 3959 3960 intel_dp->frl.is_trained = false; 3961 3962 /* Restart FRL training or fall back to TMDS mode */ 3963 intel_dp_check_frl_training(intel_dp); 3964 } 3965 } 3966 3967 static bool 3968 intel_dp_needs_link_retrain(struct intel_dp *intel_dp) 3969 { 3970 u8 link_status[DP_LINK_STATUS_SIZE]; 3971 3972 if (!intel_dp->link_trained) 3973 return false; 3974 3975 /* 3976 * While PSR source HW is enabled, it will control main-link sending 3977 * frames, enabling and disabling it so trying to do a retrain will fail 3978 * as the link would or not be on or it could mix training patterns 3979 * and frame data at the same time causing retrain to fail. 3980 * Also when exiting PSR, HW will retrain the link anyways fixing 3981 * any link status error. 3982 */ 3983 if (intel_psr_enabled(intel_dp)) 3984 return false; 3985 3986 if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX, 3987 link_status) < 0) 3988 return false; 3989 3990 /* 3991 * Validate the cached values of intel_dp->link_rate and 3992 * intel_dp->lane_count before attempting to retrain. 3993 * 3994 * FIXME would be nice to user the crtc state here, but since 3995 * we need to call this from the short HPD handler that seems 3996 * a bit hard. 3997 */ 3998 if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate, 3999 intel_dp->lane_count)) 4000 return false; 4001 4002 /* Retrain if link not ok */ 4003 return !intel_dp_link_ok(intel_dp, link_status); 4004 } 4005 4006 static bool intel_dp_has_connector(struct intel_dp *intel_dp, 4007 const struct drm_connector_state *conn_state) 4008 { 4009 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4010 struct intel_encoder *encoder; 4011 enum pipe pipe; 4012 4013 if (!conn_state->best_encoder) 4014 return false; 4015 4016 /* SST */ 4017 encoder = &dp_to_dig_port(intel_dp)->base; 4018 if (conn_state->best_encoder == &encoder->base) 4019 return true; 4020 4021 /* MST */ 4022 for_each_pipe(i915, pipe) { 4023 encoder = &intel_dp->mst_encoders[pipe]->base; 4024 if (conn_state->best_encoder == &encoder->base) 4025 return true; 4026 } 4027 4028 return false; 4029 } 4030 4031 static int intel_dp_prep_link_retrain(struct intel_dp *intel_dp, 4032 struct drm_modeset_acquire_ctx *ctx, 4033 u8 *pipe_mask) 4034 { 4035 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4036 struct drm_connector_list_iter conn_iter; 4037 struct intel_connector *connector; 4038 int ret = 0; 4039 4040 *pipe_mask = 0; 4041 4042 if (!intel_dp_needs_link_retrain(intel_dp)) 4043 return 0; 4044 4045 drm_connector_list_iter_begin(&i915->drm, &conn_iter); 4046 for_each_intel_connector_iter(connector, &conn_iter) { 4047 struct drm_connector_state *conn_state = 4048 connector->base.state; 4049 struct intel_crtc_state *crtc_state; 4050 struct intel_crtc *crtc; 4051 4052 if (!intel_dp_has_connector(intel_dp, conn_state)) 4053 continue; 4054 4055 crtc = to_intel_crtc(conn_state->crtc); 4056 if (!crtc) 4057 continue; 4058 4059 ret = drm_modeset_lock(&crtc->base.mutex, ctx); 4060 if (ret) 4061 break; 4062 4063 crtc_state = to_intel_crtc_state(crtc->base.state); 4064 4065 drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state)); 4066 4067 if (!crtc_state->hw.active) 4068 continue; 4069 4070 if (conn_state->commit && 4071 !try_wait_for_completion(&conn_state->commit->hw_done)) 4072 continue; 4073 4074 *pipe_mask |= BIT(crtc->pipe); 4075 } 4076 drm_connector_list_iter_end(&conn_iter); 4077 4078 if (!intel_dp_needs_link_retrain(intel_dp)) 4079 *pipe_mask = 0; 4080 4081 return ret; 4082 } 4083 4084 static bool intel_dp_is_connected(struct intel_dp *intel_dp) 4085 { 4086 struct intel_connector *connector = intel_dp->attached_connector; 4087 4088 return connector->base.status == connector_status_connected || 4089 intel_dp->is_mst; 4090 } 4091 4092 int intel_dp_retrain_link(struct intel_encoder *encoder, 4093 struct drm_modeset_acquire_ctx *ctx) 4094 { 4095 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 4096 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 4097 struct intel_crtc *crtc; 4098 u8 pipe_mask; 4099 int ret; 4100 4101 if (!intel_dp_is_connected(intel_dp)) 4102 return 0; 4103 4104 ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, 4105 ctx); 4106 if (ret) 4107 return ret; 4108 4109 ret = intel_dp_prep_link_retrain(intel_dp, ctx, &pipe_mask); 4110 if (ret) 4111 return ret; 4112 4113 if (pipe_mask == 0) 4114 return 0; 4115 4116 drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] retraining link\n", 4117 encoder->base.base.id, encoder->base.name); 4118 4119 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4120 const struct intel_crtc_state *crtc_state = 4121 to_intel_crtc_state(crtc->base.state); 4122 4123 /* Suppress underruns caused by re-training */ 4124 intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false); 4125 if (crtc_state->has_pch_encoder) 4126 intel_set_pch_fifo_underrun_reporting(dev_priv, 4127 intel_crtc_pch_transcoder(crtc), false); 4128 } 4129 4130 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4131 const struct intel_crtc_state *crtc_state = 4132 to_intel_crtc_state(crtc->base.state); 4133 4134 /* retrain on the MST master transcoder */ 4135 if (DISPLAY_VER(dev_priv) >= 12 && 4136 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) && 4137 !intel_dp_mst_is_master_trans(crtc_state)) 4138 continue; 4139 4140 intel_dp_check_frl_training(intel_dp); 4141 intel_dp_pcon_dsc_configure(intel_dp, crtc_state); 4142 intel_dp_start_link_train(intel_dp, crtc_state); 4143 intel_dp_stop_link_train(intel_dp, crtc_state); 4144 break; 4145 } 4146 4147 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4148 const struct intel_crtc_state *crtc_state = 4149 to_intel_crtc_state(crtc->base.state); 4150 4151 /* Keep underrun reporting disabled until things are stable */ 4152 intel_crtc_wait_for_next_vblank(crtc); 4153 4154 intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true); 4155 if (crtc_state->has_pch_encoder) 4156 intel_set_pch_fifo_underrun_reporting(dev_priv, 4157 intel_crtc_pch_transcoder(crtc), true); 4158 } 4159 4160 return 0; 4161 } 4162 4163 static int intel_dp_prep_phy_test(struct intel_dp *intel_dp, 4164 struct drm_modeset_acquire_ctx *ctx, 4165 u8 *pipe_mask) 4166 { 4167 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4168 struct drm_connector_list_iter conn_iter; 4169 struct intel_connector *connector; 4170 int ret = 0; 4171 4172 *pipe_mask = 0; 4173 4174 drm_connector_list_iter_begin(&i915->drm, &conn_iter); 4175 for_each_intel_connector_iter(connector, &conn_iter) { 4176 struct drm_connector_state *conn_state = 4177 connector->base.state; 4178 struct intel_crtc_state *crtc_state; 4179 struct intel_crtc *crtc; 4180 4181 if (!intel_dp_has_connector(intel_dp, conn_state)) 4182 continue; 4183 4184 crtc = to_intel_crtc(conn_state->crtc); 4185 if (!crtc) 4186 continue; 4187 4188 ret = drm_modeset_lock(&crtc->base.mutex, ctx); 4189 if (ret) 4190 break; 4191 4192 crtc_state = to_intel_crtc_state(crtc->base.state); 4193 4194 drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state)); 4195 4196 if (!crtc_state->hw.active) 4197 continue; 4198 4199 if (conn_state->commit && 4200 !try_wait_for_completion(&conn_state->commit->hw_done)) 4201 continue; 4202 4203 *pipe_mask |= BIT(crtc->pipe); 4204 } 4205 drm_connector_list_iter_end(&conn_iter); 4206 4207 return ret; 4208 } 4209 4210 static int intel_dp_do_phy_test(struct intel_encoder *encoder, 4211 struct drm_modeset_acquire_ctx *ctx) 4212 { 4213 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 4214 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 4215 struct intel_crtc *crtc; 4216 u8 pipe_mask; 4217 int ret; 4218 4219 ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, 4220 ctx); 4221 if (ret) 4222 return ret; 4223 4224 ret = intel_dp_prep_phy_test(intel_dp, ctx, &pipe_mask); 4225 if (ret) 4226 return ret; 4227 4228 if (pipe_mask == 0) 4229 return 0; 4230 4231 drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] PHY test\n", 4232 encoder->base.base.id, encoder->base.name); 4233 4234 for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { 4235 const struct intel_crtc_state *crtc_state = 4236 to_intel_crtc_state(crtc->base.state); 4237 4238 /* test on the MST master transcoder */ 4239 if (DISPLAY_VER(dev_priv) >= 12 && 4240 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) && 4241 !intel_dp_mst_is_master_trans(crtc_state)) 4242 continue; 4243 4244 intel_dp_process_phy_request(intel_dp, crtc_state); 4245 break; 4246 } 4247 4248 return 0; 4249 } 4250 4251 void intel_dp_phy_test(struct intel_encoder *encoder) 4252 { 4253 struct drm_modeset_acquire_ctx ctx; 4254 int ret; 4255 4256 drm_modeset_acquire_init(&ctx, 0); 4257 4258 for (;;) { 4259 ret = intel_dp_do_phy_test(encoder, &ctx); 4260 4261 if (ret == -EDEADLK) { 4262 drm_modeset_backoff(&ctx); 4263 continue; 4264 } 4265 4266 break; 4267 } 4268 4269 drm_modeset_drop_locks(&ctx); 4270 drm_modeset_acquire_fini(&ctx); 4271 drm_WARN(encoder->base.dev, ret, 4272 "Acquiring modeset locks failed with %i\n", ret); 4273 } 4274 4275 static void intel_dp_check_device_service_irq(struct intel_dp *intel_dp) 4276 { 4277 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4278 u8 val; 4279 4280 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) 4281 return; 4282 4283 if (drm_dp_dpcd_readb(&intel_dp->aux, 4284 DP_DEVICE_SERVICE_IRQ_VECTOR, &val) != 1 || !val) 4285 return; 4286 4287 drm_dp_dpcd_writeb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, val); 4288 4289 if (val & DP_AUTOMATED_TEST_REQUEST) 4290 intel_dp_handle_test_request(intel_dp); 4291 4292 if (val & DP_CP_IRQ) 4293 intel_hdcp_handle_cp_irq(intel_dp->attached_connector); 4294 4295 if (val & DP_SINK_SPECIFIC_IRQ) 4296 drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n"); 4297 } 4298 4299 static void intel_dp_check_link_service_irq(struct intel_dp *intel_dp) 4300 { 4301 u8 val; 4302 4303 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) 4304 return; 4305 4306 if (drm_dp_dpcd_readb(&intel_dp->aux, 4307 DP_LINK_SERVICE_IRQ_VECTOR_ESI0, &val) != 1 || !val) 4308 return; 4309 4310 if (drm_dp_dpcd_writeb(&intel_dp->aux, 4311 DP_LINK_SERVICE_IRQ_VECTOR_ESI0, val) != 1) 4312 return; 4313 4314 if (val & HDMI_LINK_STATUS_CHANGED) 4315 intel_dp_handle_hdmi_link_status_change(intel_dp); 4316 } 4317 4318 /* 4319 * According to DP spec 4320 * 5.1.2: 4321 * 1. Read DPCD 4322 * 2. Configure link according to Receiver Capabilities 4323 * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 4324 * 4. Check link status on receipt of hot-plug interrupt 4325 * 4326 * intel_dp_short_pulse - handles short pulse interrupts 4327 * when full detection is not required. 4328 * Returns %true if short pulse is handled and full detection 4329 * is NOT required and %false otherwise. 4330 */ 4331 static bool 4332 intel_dp_short_pulse(struct intel_dp *intel_dp) 4333 { 4334 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 4335 u8 old_sink_count = intel_dp->sink_count; 4336 bool ret; 4337 4338 /* 4339 * Clearing compliance test variables to allow capturing 4340 * of values for next automated test request. 4341 */ 4342 memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); 4343 4344 /* 4345 * Now read the DPCD to see if it's actually running 4346 * If the current value of sink count doesn't match with 4347 * the value that was stored earlier or dpcd read failed 4348 * we need to do full detection 4349 */ 4350 ret = intel_dp_get_dpcd(intel_dp); 4351 4352 if ((old_sink_count != intel_dp->sink_count) || !ret) { 4353 /* No need to proceed if we are going to do full detect */ 4354 return false; 4355 } 4356 4357 intel_dp_check_device_service_irq(intel_dp); 4358 intel_dp_check_link_service_irq(intel_dp); 4359 4360 /* Handle CEC interrupts, if any */ 4361 drm_dp_cec_irq(&intel_dp->aux); 4362 4363 /* defer to the hotplug work for link retraining if needed */ 4364 if (intel_dp_needs_link_retrain(intel_dp)) 4365 return false; 4366 4367 intel_psr_short_pulse(intel_dp); 4368 4369 switch (intel_dp->compliance.test_type) { 4370 case DP_TEST_LINK_TRAINING: 4371 drm_dbg_kms(&dev_priv->drm, 4372 "Link Training Compliance Test requested\n"); 4373 /* Send a Hotplug Uevent to userspace to start modeset */ 4374 drm_kms_helper_hotplug_event(&dev_priv->drm); 4375 break; 4376 case DP_TEST_LINK_PHY_TEST_PATTERN: 4377 drm_dbg_kms(&dev_priv->drm, 4378 "PHY test pattern Compliance Test requested\n"); 4379 /* 4380 * Schedule long hpd to do the test 4381 * 4382 * FIXME get rid of the ad-hoc phy test modeset code 4383 * and properly incorporate it into the normal modeset. 4384 */ 4385 return false; 4386 } 4387 4388 return true; 4389 } 4390 4391 /* XXX this is probably wrong for multiple downstream ports */ 4392 static enum drm_connector_status 4393 intel_dp_detect_dpcd(struct intel_dp *intel_dp) 4394 { 4395 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4396 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4397 u8 *dpcd = intel_dp->dpcd; 4398 u8 type; 4399 4400 if (drm_WARN_ON(&i915->drm, intel_dp_is_edp(intel_dp))) 4401 return connector_status_connected; 4402 4403 lspcon_resume(dig_port); 4404 4405 if (!intel_dp_get_dpcd(intel_dp)) 4406 return connector_status_disconnected; 4407 4408 /* if there's no downstream port, we're done */ 4409 if (!drm_dp_is_branch(dpcd)) 4410 return connector_status_connected; 4411 4412 /* If we're HPD-aware, SINK_COUNT changes dynamically */ 4413 if (intel_dp_has_sink_count(intel_dp) && 4414 intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { 4415 return intel_dp->sink_count ? 4416 connector_status_connected : connector_status_disconnected; 4417 } 4418 4419 if (intel_dp_can_mst(intel_dp)) 4420 return connector_status_connected; 4421 4422 /* If no HPD, poke DDC gently */ 4423 if (drm_probe_ddc(&intel_dp->aux.ddc)) 4424 return connector_status_connected; 4425 4426 /* Well we tried, say unknown for unreliable port types */ 4427 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { 4428 type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK; 4429 if (type == DP_DS_PORT_TYPE_VGA || 4430 type == DP_DS_PORT_TYPE_NON_EDID) 4431 return connector_status_unknown; 4432 } else { 4433 type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & 4434 DP_DWN_STRM_PORT_TYPE_MASK; 4435 if (type == DP_DWN_STRM_PORT_TYPE_ANALOG || 4436 type == DP_DWN_STRM_PORT_TYPE_OTHER) 4437 return connector_status_unknown; 4438 } 4439 4440 /* Anything else is out of spec, warn and ignore */ 4441 drm_dbg_kms(&i915->drm, "Broken DP branch device, ignoring\n"); 4442 return connector_status_disconnected; 4443 } 4444 4445 static enum drm_connector_status 4446 edp_detect(struct intel_dp *intel_dp) 4447 { 4448 return connector_status_connected; 4449 } 4450 4451 /* 4452 * intel_digital_port_connected - is the specified port connected? 4453 * @encoder: intel_encoder 4454 * 4455 * In cases where there's a connector physically connected but it can't be used 4456 * by our hardware we also return false, since the rest of the driver should 4457 * pretty much treat the port as disconnected. This is relevant for type-C 4458 * (starting on ICL) where there's ownership involved. 4459 * 4460 * Return %true if port is connected, %false otherwise. 4461 */ 4462 bool intel_digital_port_connected(struct intel_encoder *encoder) 4463 { 4464 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 4465 struct intel_digital_port *dig_port = enc_to_dig_port(encoder); 4466 bool is_connected = false; 4467 intel_wakeref_t wakeref; 4468 4469 with_intel_display_power(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref) 4470 is_connected = dig_port->connected(encoder); 4471 4472 return is_connected; 4473 } 4474 4475 static struct edid * 4476 intel_dp_get_edid(struct intel_dp *intel_dp) 4477 { 4478 struct intel_connector *intel_connector = intel_dp->attached_connector; 4479 4480 /* use cached edid if we have one */ 4481 if (intel_connector->edid) { 4482 /* invalid edid */ 4483 if (IS_ERR(intel_connector->edid)) 4484 return NULL; 4485 4486 return drm_edid_duplicate(intel_connector->edid); 4487 } else 4488 return drm_get_edid(&intel_connector->base, 4489 &intel_dp->aux.ddc); 4490 } 4491 4492 static void 4493 intel_dp_update_dfp(struct intel_dp *intel_dp, 4494 const struct edid *edid) 4495 { 4496 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4497 struct intel_connector *connector = intel_dp->attached_connector; 4498 4499 intel_dp->dfp.max_bpc = 4500 drm_dp_downstream_max_bpc(intel_dp->dpcd, 4501 intel_dp->downstream_ports, edid); 4502 4503 intel_dp->dfp.max_dotclock = 4504 drm_dp_downstream_max_dotclock(intel_dp->dpcd, 4505 intel_dp->downstream_ports); 4506 4507 intel_dp->dfp.min_tmds_clock = 4508 drm_dp_downstream_min_tmds_clock(intel_dp->dpcd, 4509 intel_dp->downstream_ports, 4510 edid); 4511 intel_dp->dfp.max_tmds_clock = 4512 drm_dp_downstream_max_tmds_clock(intel_dp->dpcd, 4513 intel_dp->downstream_ports, 4514 edid); 4515 4516 intel_dp->dfp.pcon_max_frl_bw = 4517 drm_dp_get_pcon_max_frl_bw(intel_dp->dpcd, 4518 intel_dp->downstream_ports); 4519 4520 drm_dbg_kms(&i915->drm, 4521 "[CONNECTOR:%d:%s] DFP max bpc %d, max dotclock %d, TMDS clock %d-%d, PCON Max FRL BW %dGbps\n", 4522 connector->base.base.id, connector->base.name, 4523 intel_dp->dfp.max_bpc, 4524 intel_dp->dfp.max_dotclock, 4525 intel_dp->dfp.min_tmds_clock, 4526 intel_dp->dfp.max_tmds_clock, 4527 intel_dp->dfp.pcon_max_frl_bw); 4528 4529 intel_dp_get_pcon_dsc_cap(intel_dp); 4530 } 4531 4532 static void 4533 intel_dp_update_420(struct intel_dp *intel_dp) 4534 { 4535 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4536 struct intel_connector *connector = intel_dp->attached_connector; 4537 bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420, rgb_to_ycbcr; 4538 4539 /* No YCbCr output support on gmch platforms */ 4540 if (HAS_GMCH(i915)) 4541 return; 4542 4543 /* 4544 * ILK doesn't seem capable of DP YCbCr output. The 4545 * displayed image is severly corrupted. SNB+ is fine. 4546 */ 4547 if (IS_IRONLAKE(i915)) 4548 return; 4549 4550 is_branch = drm_dp_is_branch(intel_dp->dpcd); 4551 ycbcr_420_passthrough = 4552 drm_dp_downstream_420_passthrough(intel_dp->dpcd, 4553 intel_dp->downstream_ports); 4554 /* on-board LSPCON always assumed to support 4:4:4->4:2:0 conversion */ 4555 ycbcr_444_to_420 = 4556 dp_to_dig_port(intel_dp)->lspcon.active || 4557 drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd, 4558 intel_dp->downstream_ports); 4559 rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, 4560 intel_dp->downstream_ports, 4561 DP_DS_HDMI_BT709_RGB_YCBCR_CONV); 4562 4563 if (DISPLAY_VER(i915) >= 11) { 4564 /* Let PCON convert from RGB->YCbCr if possible */ 4565 if (is_branch && rgb_to_ycbcr && ycbcr_444_to_420) { 4566 intel_dp->dfp.rgb_to_ycbcr = true; 4567 intel_dp->dfp.ycbcr_444_to_420 = true; 4568 connector->base.ycbcr_420_allowed = true; 4569 } else { 4570 /* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */ 4571 intel_dp->dfp.ycbcr_444_to_420 = 4572 ycbcr_444_to_420 && !ycbcr_420_passthrough; 4573 4574 connector->base.ycbcr_420_allowed = 4575 !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; 4576 } 4577 } else { 4578 /* 4:4:4->4:2:0 conversion is the only way */ 4579 intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420; 4580 4581 connector->base.ycbcr_420_allowed = ycbcr_444_to_420; 4582 } 4583 4584 drm_dbg_kms(&i915->drm, 4585 "[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", 4586 connector->base.base.id, connector->base.name, 4587 str_yes_no(intel_dp->dfp.rgb_to_ycbcr), 4588 str_yes_no(connector->base.ycbcr_420_allowed), 4589 str_yes_no(intel_dp->dfp.ycbcr_444_to_420)); 4590 } 4591 4592 static void 4593 intel_dp_set_edid(struct intel_dp *intel_dp) 4594 { 4595 struct drm_i915_private *i915 = dp_to_i915(intel_dp); 4596 struct intel_connector *connector = intel_dp->attached_connector; 4597 struct edid *edid; 4598 bool vrr_capable; 4599 4600 intel_dp_unset_edid(intel_dp); 4601 edid = intel_dp_get_edid(intel_dp); 4602 connector->detect_edid = edid; 4603 4604 vrr_capable = intel_vrr_is_capable(connector); 4605 drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] VRR capable: %s\n", 4606 connector->base.base.id, connector->base.name, str_yes_no(vrr_capable)); 4607 drm_connector_set_vrr_capable_property(&connector->base, vrr_capable); 4608 4609 intel_dp_update_dfp(intel_dp, edid); 4610 intel_dp_update_420(intel_dp); 4611 4612 if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { 4613 intel_dp->has_hdmi_sink = drm_detect_hdmi_monitor(edid); 4614 intel_dp->has_audio = drm_detect_monitor_audio(edid); 4615 } 4616 4617 drm_dp_cec_set_edid(&intel_dp->aux, edid); 4618 } 4619 4620 static void 4621 intel_dp_unset_edid(struct intel_dp *intel_dp) 4622 { 4623 struct intel_connector *connector = intel_dp->attached_connector; 4624 4625 drm_dp_cec_unset_edid(&intel_dp->aux); 4626 kfree(connector->detect_edid); 4627 connector->detect_edid = NULL; 4628 4629 intel_dp->has_hdmi_sink = false; 4630 intel_dp->has_audio = false; 4631 4632 intel_dp->dfp.max_bpc = 0; 4633 intel_dp->dfp.max_dotclock = 0; 4634 intel_dp->dfp.min_tmds_clock = 0; 4635 intel_dp->dfp.max_tmds_clock = 0; 4636 4637 intel_dp->dfp.pcon_max_frl_bw = 0; 4638 4639 intel_dp->dfp.ycbcr_444_to_420 = false; 4640 connector->base.ycbcr_420_allowed = false; 4641 4642 drm_connector_set_vrr_capable_property(&connector->base, 4643 false); 4644 } 4645 4646 static int 4647 intel_dp_detect(struct drm_connector *connector, 4648 struct drm_modeset_acquire_ctx *ctx, 4649 bool force) 4650 { 4651 struct drm_i915_private *dev_priv = to_i915(connector->dev); 4652 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4653 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4654 struct intel_encoder *encoder = &dig_port->base; 4655 enum drm_connector_status status; 4656 4657 drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", 4658 connector->base.id, connector->name); 4659 drm_WARN_ON(&dev_priv->drm, 4660 !drm_modeset_is_locked(&dev_priv->drm.mode_config.connection_mutex)); 4661 4662 if (!INTEL_DISPLAY_ENABLED(dev_priv)) 4663 return connector_status_disconnected; 4664 4665 /* Can't disconnect eDP */ 4666 if (intel_dp_is_edp(intel_dp)) 4667 status = edp_detect(intel_dp); 4668 else if (intel_digital_port_connected(encoder)) 4669 status = intel_dp_detect_dpcd(intel_dp); 4670 else 4671 status = connector_status_disconnected; 4672 4673 if (status == connector_status_disconnected) { 4674 memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); 4675 memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd)); 4676 4677 if (intel_dp->is_mst) { 4678 drm_dbg_kms(&dev_priv->drm, 4679 "MST device may have disappeared %d vs %d\n", 4680 intel_dp->is_mst, 4681 intel_dp->mst_mgr.mst_state); 4682 intel_dp->is_mst = false; 4683 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, 4684 intel_dp->is_mst); 4685 } 4686 4687 goto out; 4688 } 4689 4690 /* Read DP Sink DSC Cap DPCD regs for DP v1.4 */ 4691 if (DISPLAY_VER(dev_priv) >= 11) 4692 intel_dp_get_dsc_sink_cap(intel_dp); 4693 4694 intel_dp_configure_mst(intel_dp); 4695 4696 /* 4697 * TODO: Reset link params when switching to MST mode, until MST 4698 * supports link training fallback params. 4699 */ 4700 if (intel_dp->reset_link_params || intel_dp->is_mst) { 4701 intel_dp_reset_max_link_params(intel_dp); 4702 intel_dp->reset_link_params = false; 4703 } 4704 4705 intel_dp_print_rates(intel_dp); 4706 4707 if (intel_dp->is_mst) { 4708 /* 4709 * If we are in MST mode then this connector 4710 * won't appear connected or have anything 4711 * with EDID on it 4712 */ 4713 status = connector_status_disconnected; 4714 goto out; 4715 } 4716 4717 /* 4718 * Some external monitors do not signal loss of link synchronization 4719 * with an IRQ_HPD, so force a link status check. 4720 */ 4721 if (!intel_dp_is_edp(intel_dp)) { 4722 int ret; 4723 4724 ret = intel_dp_retrain_link(encoder, ctx); 4725 if (ret) 4726 return ret; 4727 } 4728 4729 /* 4730 * Clearing NACK and defer counts to get their exact values 4731 * while reading EDID which are required by Compliance tests 4732 * 4.2.2.4 and 4.2.2.5 4733 */ 4734 intel_dp->aux.i2c_nack_count = 0; 4735 intel_dp->aux.i2c_defer_count = 0; 4736 4737 intel_dp_set_edid(intel_dp); 4738 if (intel_dp_is_edp(intel_dp) || 4739 to_intel_connector(connector)->detect_edid) 4740 status = connector_status_connected; 4741 4742 intel_dp_check_device_service_irq(intel_dp); 4743 4744 out: 4745 if (status != connector_status_connected && !intel_dp->is_mst) 4746 intel_dp_unset_edid(intel_dp); 4747 4748 /* 4749 * Make sure the refs for power wells enabled during detect are 4750 * dropped to avoid a new detect cycle triggered by HPD polling. 4751 */ 4752 intel_display_power_flush_work(dev_priv); 4753 4754 if (!intel_dp_is_edp(intel_dp)) 4755 drm_dp_set_subconnector_property(connector, 4756 status, 4757 intel_dp->dpcd, 4758 intel_dp->downstream_ports); 4759 return status; 4760 } 4761 4762 static void 4763 intel_dp_force(struct drm_connector *connector) 4764 { 4765 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4766 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4767 struct intel_encoder *intel_encoder = &dig_port->base; 4768 struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); 4769 enum intel_display_power_domain aux_domain = 4770 intel_aux_power_domain(dig_port); 4771 intel_wakeref_t wakeref; 4772 4773 drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", 4774 connector->base.id, connector->name); 4775 intel_dp_unset_edid(intel_dp); 4776 4777 if (connector->status != connector_status_connected) 4778 return; 4779 4780 wakeref = intel_display_power_get(dev_priv, aux_domain); 4781 4782 intel_dp_set_edid(intel_dp); 4783 4784 intel_display_power_put(dev_priv, aux_domain, wakeref); 4785 } 4786 4787 static int intel_dp_get_modes(struct drm_connector *connector) 4788 { 4789 struct intel_connector *intel_connector = to_intel_connector(connector); 4790 struct edid *edid; 4791 int num_modes = 0; 4792 4793 edid = intel_connector->detect_edid; 4794 if (edid) 4795 num_modes = intel_connector_update_modes(connector, edid); 4796 4797 /* Also add fixed mode, which may or may not be present in EDID */ 4798 if (intel_dp_is_edp(intel_attached_dp(intel_connector))) 4799 num_modes += intel_panel_get_modes(intel_connector); 4800 4801 if (num_modes) 4802 return num_modes; 4803 4804 if (!edid) { 4805 struct intel_dp *intel_dp = intel_attached_dp(intel_connector); 4806 struct drm_display_mode *mode; 4807 4808 mode = drm_dp_downstream_mode(connector->dev, 4809 intel_dp->dpcd, 4810 intel_dp->downstream_ports); 4811 if (mode) { 4812 drm_mode_probed_add(connector, mode); 4813 num_modes++; 4814 } 4815 } 4816 4817 return num_modes; 4818 } 4819 4820 static int 4821 intel_dp_connector_register(struct drm_connector *connector) 4822 { 4823 struct drm_i915_private *i915 = to_i915(connector->dev); 4824 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4825 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 4826 struct intel_lspcon *lspcon = &dig_port->lspcon; 4827 int ret; 4828 4829 ret = intel_connector_register(connector); 4830 if (ret) 4831 return ret; 4832 4833 drm_dbg_kms(&i915->drm, "registering %s bus for %s\n", 4834 intel_dp->aux.name, connector->kdev->kobj.name); 4835 4836 intel_dp->aux.dev = connector->kdev; 4837 ret = drm_dp_aux_register(&intel_dp->aux); 4838 if (!ret) 4839 drm_dp_cec_register_connector(&intel_dp->aux, connector); 4840 4841 if (!intel_bios_is_lspcon_present(i915, dig_port->base.port)) 4842 return ret; 4843 4844 /* 4845 * ToDo: Clean this up to handle lspcon init and resume more 4846 * efficiently and streamlined. 4847 */ 4848 if (lspcon_init(dig_port)) { 4849 lspcon_detect_hdr_capability(lspcon); 4850 if (lspcon->hdr_supported) 4851 drm_connector_attach_hdr_output_metadata_property(connector); 4852 } 4853 4854 return ret; 4855 } 4856 4857 static void 4858 intel_dp_connector_unregister(struct drm_connector *connector) 4859 { 4860 struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); 4861 4862 drm_dp_cec_unregister_connector(&intel_dp->aux); 4863 drm_dp_aux_unregister(&intel_dp->aux); 4864 intel_connector_unregister(connector); 4865 } 4866 4867 void intel_dp_encoder_flush_work(struct drm_encoder *encoder) 4868 { 4869 struct intel_digital_port *dig_port = enc_to_dig_port(to_intel_encoder(encoder)); 4870 struct intel_dp *intel_dp = &dig_port->dp; 4871 4872 intel_dp_mst_encoder_cleanup(dig_port); 4873 4874 intel_pps_vdd_off_sync(intel_dp); 4875 4876 intel_dp_aux_fini(intel_dp); 4877 } 4878 4879 void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) 4880 { 4881 struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); 4882 4883 intel_pps_vdd_off_sync(intel_dp); 4884 } 4885 4886 void intel_dp_encoder_shutdown(struct intel_encoder *intel_encoder) 4887 { 4888 struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); 4889 4890 intel_pps_wait_power_cycle(intel_dp); 4891 } 4892 4893 static int intel_modeset_tile_group(struct intel_atomic_state *state, 4894 int tile_group_id) 4895 { 4896 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 4897 struct drm_connector_list_iter conn_iter; 4898 struct drm_connector *connector; 4899 int ret = 0; 4900 4901 drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); 4902 drm_for_each_connector_iter(connector, &conn_iter) { 4903 struct drm_connector_state *conn_state; 4904 struct intel_crtc_state *crtc_state; 4905 struct intel_crtc *crtc; 4906 4907 if (!connector->has_tile || 4908 connector->tile_group->id != tile_group_id) 4909 continue; 4910 4911 conn_state = drm_atomic_get_connector_state(&state->base, 4912 connector); 4913 if (IS_ERR(conn_state)) { 4914 ret = PTR_ERR(conn_state); 4915 break; 4916 } 4917 4918 crtc = to_intel_crtc(conn_state->crtc); 4919 4920 if (!crtc) 4921 continue; 4922 4923 crtc_state = intel_atomic_get_new_crtc_state(state, crtc); 4924 crtc_state->uapi.mode_changed = true; 4925 4926 ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); 4927 if (ret) 4928 break; 4929 } 4930 drm_connector_list_iter_end(&conn_iter); 4931 4932 return ret; 4933 } 4934 4935 static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders) 4936 { 4937 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 4938 struct intel_crtc *crtc; 4939 4940 if (transcoders == 0) 4941 return 0; 4942 4943 for_each_intel_crtc(&dev_priv->drm, crtc) { 4944 struct intel_crtc_state *crtc_state; 4945 int ret; 4946 4947 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); 4948 if (IS_ERR(crtc_state)) 4949 return PTR_ERR(crtc_state); 4950 4951 if (!crtc_state->hw.enable) 4952 continue; 4953 4954 if (!(transcoders & BIT(crtc_state->cpu_transcoder))) 4955 continue; 4956 4957 crtc_state->uapi.mode_changed = true; 4958 4959 ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base); 4960 if (ret) 4961 return ret; 4962 4963 ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); 4964 if (ret) 4965 return ret; 4966 4967 transcoders &= ~BIT(crtc_state->cpu_transcoder); 4968 } 4969 4970 drm_WARN_ON(&dev_priv->drm, transcoders != 0); 4971 4972 return 0; 4973 } 4974 4975 static int intel_modeset_synced_crtcs(struct intel_atomic_state *state, 4976 struct drm_connector *connector) 4977 { 4978 const struct drm_connector_state *old_conn_state = 4979 drm_atomic_get_old_connector_state(&state->base, connector); 4980 const struct intel_crtc_state *old_crtc_state; 4981 struct intel_crtc *crtc; 4982 u8 transcoders; 4983 4984 crtc = to_intel_crtc(old_conn_state->crtc); 4985 if (!crtc) 4986 return 0; 4987 4988 old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc); 4989 4990 if (!old_crtc_state->hw.active) 4991 return 0; 4992 4993 transcoders = old_crtc_state->sync_mode_slaves_mask; 4994 if (old_crtc_state->master_transcoder != INVALID_TRANSCODER) 4995 transcoders |= BIT(old_crtc_state->master_transcoder); 4996 4997 return intel_modeset_affected_transcoders(state, 4998 transcoders); 4999 } 5000 5001 static int intel_dp_connector_atomic_check(struct drm_connector *conn, 5002 struct drm_atomic_state *_state) 5003 { 5004 struct drm_i915_private *dev_priv = to_i915(conn->dev); 5005 struct intel_atomic_state *state = to_intel_atomic_state(_state); 5006 struct drm_connector_state *conn_state = drm_atomic_get_new_connector_state(_state, conn); 5007 struct intel_connector *intel_conn = to_intel_connector(conn); 5008 struct intel_dp *intel_dp = enc_to_intel_dp(intel_conn->encoder); 5009 int ret; 5010 5011 ret = intel_digital_connector_atomic_check(conn, &state->base); 5012 if (ret) 5013 return ret; 5014 5015 if (intel_dp_mst_source_support(intel_dp)) { 5016 ret = drm_dp_mst_root_conn_atomic_check(conn_state, &intel_dp->mst_mgr); 5017 if (ret) 5018 return ret; 5019 } 5020 5021 /* 5022 * We don't enable port sync on BDW due to missing w/as and 5023 * due to not having adjusted the modeset sequence appropriately. 5024 */ 5025 if (DISPLAY_VER(dev_priv) < 9) 5026 return 0; 5027 5028 if (!intel_connector_needs_modeset(state, conn)) 5029 return 0; 5030 5031 if (conn->has_tile) { 5032 ret = intel_modeset_tile_group(state, conn->tile_group->id); 5033 if (ret) 5034 return ret; 5035 } 5036 5037 return intel_modeset_synced_crtcs(state, conn); 5038 } 5039 5040 static void intel_dp_oob_hotplug_event(struct drm_connector *connector) 5041 { 5042 struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector)); 5043 struct drm_i915_private *i915 = to_i915(connector->dev); 5044 5045 spin_lock_irq(&i915->irq_lock); 5046 i915->display.hotplug.event_bits |= BIT(encoder->hpd_pin); 5047 spin_unlock_irq(&i915->irq_lock); 5048 queue_delayed_work(system_wq, &i915->display.hotplug.hotplug_work, 0); 5049 } 5050 5051 static const struct drm_connector_funcs intel_dp_connector_funcs = { 5052 .force = intel_dp_force, 5053 .fill_modes = drm_helper_probe_single_connector_modes, 5054 .atomic_get_property = intel_digital_connector_atomic_get_property, 5055 .atomic_set_property = intel_digital_connector_atomic_set_property, 5056 .late_register = intel_dp_connector_register, 5057 .early_unregister = intel_dp_connector_unregister, 5058 .destroy = intel_connector_destroy, 5059 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, 5060 .atomic_duplicate_state = intel_digital_connector_duplicate_state, 5061 .oob_hotplug_event = intel_dp_oob_hotplug_event, 5062 }; 5063 5064 static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { 5065 .detect_ctx = intel_dp_detect, 5066 .get_modes = intel_dp_get_modes, 5067 .mode_valid = intel_dp_mode_valid, 5068 .atomic_check = intel_dp_connector_atomic_check, 5069 }; 5070 5071 enum irqreturn 5072 intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd) 5073 { 5074 struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); 5075 struct intel_dp *intel_dp = &dig_port->dp; 5076 5077 if (dig_port->base.type == INTEL_OUTPUT_EDP && 5078 (long_hpd || !intel_pps_have_panel_power_or_vdd(intel_dp))) { 5079 /* 5080 * vdd off can generate a long/short pulse on eDP which 5081 * would require vdd on to handle it, and thus we 5082 * would end up in an endless cycle of 5083 * "vdd off -> long/short hpd -> vdd on -> detect -> vdd off -> ..." 5084 */ 5085 drm_dbg_kms(&i915->drm, 5086 "ignoring %s hpd on eDP [ENCODER:%d:%s]\n", 5087 long_hpd ? "long" : "short", 5088 dig_port->base.base.base.id, 5089 dig_port->base.base.name); 5090 return IRQ_HANDLED; 5091 } 5092 5093 drm_dbg_kms(&i915->drm, "got hpd irq on [ENCODER:%d:%s] - %s\n", 5094 dig_port->base.base.base.id, 5095 dig_port->base.base.name, 5096 long_hpd ? "long" : "short"); 5097 5098 if (long_hpd) { 5099 intel_dp->reset_link_params = true; 5100 return IRQ_NONE; 5101 } 5102 5103 if (intel_dp->is_mst) { 5104 if (!intel_dp_check_mst_status(intel_dp)) 5105 return IRQ_NONE; 5106 } else if (!intel_dp_short_pulse(intel_dp)) { 5107 return IRQ_NONE; 5108 } 5109 5110 return IRQ_HANDLED; 5111 } 5112 5113 /* check the VBT to see whether the eDP is on another port */ 5114 bool intel_dp_is_port_edp(struct drm_i915_private *dev_priv, enum port port) 5115 { 5116 /* 5117 * eDP not supported on g4x. so bail out early just 5118 * for a bit extra safety in case the VBT is bonkers. 5119 */ 5120 if (DISPLAY_VER(dev_priv) < 5) 5121 return false; 5122 5123 if (DISPLAY_VER(dev_priv) < 9 && port == PORT_A) 5124 return true; 5125 5126 return intel_bios_is_port_edp(dev_priv, port); 5127 } 5128 5129 static bool 5130 has_gamut_metadata_dip(struct drm_i915_private *i915, enum port port) 5131 { 5132 if (intel_bios_is_lspcon_present(i915, port)) 5133 return false; 5134 5135 if (DISPLAY_VER(i915) >= 11) 5136 return true; 5137 5138 if (port == PORT_A) 5139 return false; 5140 5141 if (IS_HASWELL(i915) || IS_BROADWELL(i915) || 5142 DISPLAY_VER(i915) >= 9) 5143 return true; 5144 5145 return false; 5146 } 5147 5148 static void 5149 intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) 5150 { 5151 struct drm_i915_private *dev_priv = to_i915(connector->dev); 5152 enum port port = dp_to_dig_port(intel_dp)->base.port; 5153 5154 if (!intel_dp_is_edp(intel_dp)) 5155 drm_connector_attach_dp_subconnector_property(connector); 5156 5157 if (!IS_G4X(dev_priv) && port != PORT_A) 5158 intel_attach_force_audio_property(connector); 5159 5160 intel_attach_broadcast_rgb_property(connector); 5161 if (HAS_GMCH(dev_priv)) 5162 drm_connector_attach_max_bpc_property(connector, 6, 10); 5163 else if (DISPLAY_VER(dev_priv) >= 5) 5164 drm_connector_attach_max_bpc_property(connector, 6, 12); 5165 5166 /* Register HDMI colorspace for case of lspcon */ 5167 if (intel_bios_is_lspcon_present(dev_priv, port)) { 5168 drm_connector_attach_content_type_property(connector); 5169 intel_attach_hdmi_colorspace_property(connector); 5170 } else { 5171 intel_attach_dp_colorspace_property(connector); 5172 } 5173 5174 if (has_gamut_metadata_dip(dev_priv, port)) 5175 drm_connector_attach_hdr_output_metadata_property(connector); 5176 5177 if (intel_dp_is_edp(intel_dp)) { 5178 u32 allowed_scalers; 5179 5180 allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) | BIT(DRM_MODE_SCALE_FULLSCREEN); 5181 if (!HAS_GMCH(dev_priv)) 5182 allowed_scalers |= BIT(DRM_MODE_SCALE_CENTER); 5183 5184 drm_connector_attach_scaling_mode_property(connector, allowed_scalers); 5185 5186 connector->state->scaling_mode = DRM_MODE_SCALE_ASPECT; 5187 5188 } 5189 5190 if (HAS_VRR(dev_priv)) 5191 drm_connector_attach_vrr_capable_property(connector); 5192 } 5193 5194 static void 5195 intel_edp_add_properties(struct intel_dp *intel_dp) 5196 { 5197 struct intel_connector *connector = intel_dp->attached_connector; 5198 struct drm_i915_private *i915 = to_i915(connector->base.dev); 5199 const struct drm_display_mode *fixed_mode = 5200 intel_panel_preferred_fixed_mode(connector); 5201 5202 if (!fixed_mode) 5203 return; 5204 5205 drm_connector_set_panel_orientation_with_quirk(&connector->base, 5206 i915->display.vbt.orientation, 5207 fixed_mode->hdisplay, 5208 fixed_mode->vdisplay); 5209 } 5210 5211 static bool intel_edp_init_connector(struct intel_dp *intel_dp, 5212 struct intel_connector *intel_connector) 5213 { 5214 struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); 5215 struct drm_device *dev = &dev_priv->drm; 5216 struct drm_connector *connector = &intel_connector->base; 5217 struct drm_display_mode *fixed_mode; 5218 struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; 5219 bool has_dpcd; 5220 enum pipe pipe = INVALID_PIPE; 5221 struct edid *edid; 5222 5223 if (!intel_dp_is_edp(intel_dp)) 5224 return true; 5225 5226 /* 5227 * On IBX/CPT we may get here with LVDS already registered. Since the 5228 * driver uses the only internal power sequencer available for both 5229 * eDP and LVDS bail out early in this case to prevent interfering 5230 * with an already powered-on LVDS power sequencer. 5231 */ 5232 if (intel_get_lvds_encoder(dev_priv)) { 5233 drm_WARN_ON(dev, 5234 !(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))); 5235 drm_info(&dev_priv->drm, 5236 "LVDS was detected, not registering eDP\n"); 5237 5238 return false; 5239 } 5240 5241 intel_pps_init(intel_dp); 5242 5243 /* Cache DPCD and EDID for edp. */ 5244 has_dpcd = intel_edp_init_dpcd(intel_dp); 5245 5246 if (!has_dpcd) { 5247 /* if this fails, presume the device is a ghost */ 5248 drm_info(&dev_priv->drm, 5249 "failed to retrieve link info, disabling eDP\n"); 5250 goto out_vdd_off; 5251 } 5252 5253 mutex_lock(&dev->mode_config.mutex); 5254 edid = drm_get_edid(connector, &intel_dp->aux.ddc); 5255 if (!edid) { 5256 /* Fallback to EDID from ACPI OpRegion, if any */ 5257 edid = intel_opregion_get_edid(intel_connector); 5258 if (edid) 5259 drm_dbg_kms(&dev_priv->drm, 5260 "[CONNECTOR:%d:%s] Using OpRegion EDID\n", 5261 connector->base.id, connector->name); 5262 } 5263 if (edid) { 5264 if (drm_add_edid_modes(connector, edid)) { 5265 drm_connector_update_edid_property(connector, edid); 5266 } else { 5267 kfree(edid); 5268 edid = ERR_PTR(-EINVAL); 5269 } 5270 } else { 5271 edid = ERR_PTR(-ENOENT); 5272 } 5273 intel_connector->edid = edid; 5274 5275 intel_bios_init_panel(dev_priv, &intel_connector->panel, 5276 encoder->devdata, IS_ERR(edid) ? NULL : edid); 5277 5278 intel_panel_add_edid_fixed_modes(intel_connector, 5279 intel_connector->panel.vbt.drrs_type != DRRS_TYPE_NONE || 5280 intel_vrr_is_capable(intel_connector)); 5281 5282 /* MSO requires information from the EDID */ 5283 intel_edp_mso_init(intel_dp); 5284 5285 /* multiply the mode clock and horizontal timings for MSO */ 5286 list_for_each_entry(fixed_mode, &intel_connector->panel.fixed_modes, head) 5287 intel_edp_mso_mode_fixup(intel_connector, fixed_mode); 5288 5289 /* fallback to VBT if available for eDP */ 5290 if (!intel_panel_preferred_fixed_mode(intel_connector)) 5291 intel_panel_add_vbt_lfp_fixed_mode(intel_connector); 5292 5293 mutex_unlock(&dev->mode_config.mutex); 5294 5295 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { 5296 /* 5297 * Figure out the current pipe for the initial backlight setup. 5298 * If the current pipe isn't valid, try the PPS pipe, and if that 5299 * fails just assume pipe A. 5300 */ 5301 pipe = vlv_active_pipe(intel_dp); 5302 5303 if (pipe != PIPE_A && pipe != PIPE_B) 5304 pipe = intel_dp->pps.pps_pipe; 5305 5306 if (pipe != PIPE_A && pipe != PIPE_B) 5307 pipe = PIPE_A; 5308 5309 drm_dbg_kms(&dev_priv->drm, 5310 "using pipe %c for initial backlight setup\n", 5311 pipe_name(pipe)); 5312 } 5313 5314 intel_panel_init(intel_connector); 5315 5316 intel_backlight_setup(intel_connector, pipe); 5317 5318 intel_edp_add_properties(intel_dp); 5319 5320 intel_pps_init_late(intel_dp); 5321 5322 return true; 5323 5324 out_vdd_off: 5325 intel_pps_vdd_off_sync(intel_dp); 5326 5327 return false; 5328 } 5329 5330 static void intel_dp_modeset_retry_work_fn(struct work_struct *work) 5331 { 5332 struct intel_connector *intel_connector; 5333 struct drm_connector *connector; 5334 5335 intel_connector = container_of(work, typeof(*intel_connector), 5336 modeset_retry_work); 5337 connector = &intel_connector->base; 5338 drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s]\n", connector->base.id, 5339 connector->name); 5340 5341 /* Grab the locks before changing connector property*/ 5342 mutex_lock(&connector->dev->mode_config.mutex); 5343 /* Set connector link status to BAD and send a Uevent to notify 5344 * userspace to do a modeset. 5345 */ 5346 drm_connector_set_link_status_property(connector, 5347 DRM_MODE_LINK_STATUS_BAD); 5348 mutex_unlock(&connector->dev->mode_config.mutex); 5349 /* Send Hotplug uevent so userspace can reprobe */ 5350 drm_kms_helper_connector_hotplug_event(connector); 5351 } 5352 5353 bool 5354 intel_dp_init_connector(struct intel_digital_port *dig_port, 5355 struct intel_connector *intel_connector) 5356 { 5357 struct drm_connector *connector = &intel_connector->base; 5358 struct intel_dp *intel_dp = &dig_port->dp; 5359 struct intel_encoder *intel_encoder = &dig_port->base; 5360 struct drm_device *dev = intel_encoder->base.dev; 5361 struct drm_i915_private *dev_priv = to_i915(dev); 5362 enum port port = intel_encoder->port; 5363 enum phy phy = intel_port_to_phy(dev_priv, port); 5364 int type; 5365 5366 /* Initialize the work for modeset in case of link train failure */ 5367 INIT_WORK(&intel_connector->modeset_retry_work, 5368 intel_dp_modeset_retry_work_fn); 5369 5370 if (drm_WARN(dev, dig_port->max_lanes < 1, 5371 "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n", 5372 dig_port->max_lanes, intel_encoder->base.base.id, 5373 intel_encoder->base.name)) 5374 return false; 5375 5376 intel_dp->reset_link_params = true; 5377 intel_dp->pps.pps_pipe = INVALID_PIPE; 5378 intel_dp->pps.active_pipe = INVALID_PIPE; 5379 5380 /* Preserve the current hw state. */ 5381 intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg); 5382 intel_dp->attached_connector = intel_connector; 5383 5384 if (intel_dp_is_port_edp(dev_priv, port)) { 5385 /* 5386 * Currently we don't support eDP on TypeC ports, although in 5387 * theory it could work on TypeC legacy ports. 5388 */ 5389 drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy)); 5390 type = DRM_MODE_CONNECTOR_eDP; 5391 intel_encoder->type = INTEL_OUTPUT_EDP; 5392 5393 /* eDP only on port B and/or C on vlv/chv */ 5394 if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) || 5395 IS_CHERRYVIEW(dev_priv)) && 5396 port != PORT_B && port != PORT_C)) 5397 return false; 5398 } else { 5399 type = DRM_MODE_CONNECTOR_DisplayPort; 5400 } 5401 5402 intel_dp_set_default_sink_rates(intel_dp); 5403 intel_dp_set_default_max_sink_lane_count(intel_dp); 5404 5405 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) 5406 intel_dp->pps.active_pipe = vlv_active_pipe(intel_dp); 5407 5408 drm_dbg_kms(&dev_priv->drm, 5409 "Adding %s connector on [ENCODER:%d:%s]\n", 5410 type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", 5411 intel_encoder->base.base.id, intel_encoder->base.name); 5412 5413 drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); 5414 drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); 5415 5416 if (!HAS_GMCH(dev_priv)) 5417 connector->interlace_allowed = true; 5418 connector->doublescan_allowed = 0; 5419 5420 intel_connector->polled = DRM_CONNECTOR_POLL_HPD; 5421 5422 intel_dp_aux_init(intel_dp); 5423 5424 intel_connector_attach_encoder(intel_connector, intel_encoder); 5425 5426 if (HAS_DDI(dev_priv)) 5427 intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; 5428 else 5429 intel_connector->get_hw_state = intel_connector_get_hw_state; 5430 5431 if (!intel_edp_init_connector(intel_dp, intel_connector)) { 5432 intel_dp_aux_fini(intel_dp); 5433 goto fail; 5434 } 5435 5436 intel_dp_set_source_rates(intel_dp); 5437 intel_dp_set_common_rates(intel_dp); 5438 intel_dp_reset_max_link_params(intel_dp); 5439 5440 /* init MST on ports that can support it */ 5441 intel_dp_mst_encoder_init(dig_port, 5442 intel_connector->base.base.id); 5443 5444 intel_dp_add_properties(intel_dp, connector); 5445 5446 if (is_hdcp_supported(dev_priv, port) && !intel_dp_is_edp(intel_dp)) { 5447 int ret = intel_dp_hdcp_init(dig_port, intel_connector); 5448 if (ret) 5449 drm_dbg_kms(&dev_priv->drm, 5450 "HDCP init failed, skipping.\n"); 5451 } 5452 5453 /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written 5454 * 0xd. Failure to do so will result in spurious interrupts being 5455 * generated on the port when a cable is not attached. 5456 */ 5457 if (IS_G45(dev_priv)) { 5458 u32 temp = intel_de_read(dev_priv, PEG_BAND_GAP_DATA); 5459 intel_de_write(dev_priv, PEG_BAND_GAP_DATA, 5460 (temp & ~0xf) | 0xd); 5461 } 5462 5463 intel_dp->frl.is_trained = false; 5464 intel_dp->frl.trained_rate_gbps = 0; 5465 5466 intel_psr_init(intel_dp); 5467 5468 return true; 5469 5470 fail: 5471 drm_connector_cleanup(connector); 5472 5473 return false; 5474 } 5475 5476 void intel_dp_mst_suspend(struct drm_i915_private *dev_priv) 5477 { 5478 struct intel_encoder *encoder; 5479 5480 if (!HAS_DISPLAY(dev_priv)) 5481 return; 5482 5483 for_each_intel_encoder(&dev_priv->drm, encoder) { 5484 struct intel_dp *intel_dp; 5485 5486 if (encoder->type != INTEL_OUTPUT_DDI) 5487 continue; 5488 5489 intel_dp = enc_to_intel_dp(encoder); 5490 5491 if (!intel_dp_mst_source_support(intel_dp)) 5492 continue; 5493 5494 if (intel_dp->is_mst) 5495 drm_dp_mst_topology_mgr_suspend(&intel_dp->mst_mgr); 5496 } 5497 } 5498 5499 void intel_dp_mst_resume(struct drm_i915_private *dev_priv) 5500 { 5501 struct intel_encoder *encoder; 5502 5503 if (!HAS_DISPLAY(dev_priv)) 5504 return; 5505 5506 for_each_intel_encoder(&dev_priv->drm, encoder) { 5507 struct intel_dp *intel_dp; 5508 int ret; 5509 5510 if (encoder->type != INTEL_OUTPUT_DDI) 5511 continue; 5512 5513 intel_dp = enc_to_intel_dp(encoder); 5514 5515 if (!intel_dp_mst_source_support(intel_dp)) 5516 continue; 5517 5518 ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr, 5519 true); 5520 if (ret) { 5521 intel_dp->is_mst = false; 5522 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, 5523 false); 5524 } 5525 } 5526 } 5527