1 // SPDX-License-Identifier: MIT 2 /* 3 * Copyright © 2022 Intel Corporation 4 */ 5 6 #include "i915_drv.h" 7 #include "i915_irq.h" 8 #include "intel_combo_phy.h" 9 #include "intel_combo_phy_regs.h" 10 #include "intel_crt.h" 11 #include "intel_de.h" 12 #include "intel_display_power_well.h" 13 #include "intel_display_types.h" 14 #include "intel_dmc.h" 15 #include "intel_dpio_phy.h" 16 #include "intel_dpll.h" 17 #include "intel_hotplug.h" 18 #include "intel_pcode.h" 19 #include "intel_pm.h" 20 #include "intel_pps.h" 21 #include "intel_tc.h" 22 #include "intel_vga.h" 23 #include "vlv_sideband.h" 24 #include "vlv_sideband_reg.h" 25 26 struct i915_power_well_regs { 27 i915_reg_t bios; 28 i915_reg_t driver; 29 i915_reg_t kvmr; 30 i915_reg_t debug; 31 }; 32 33 struct i915_power_well_ops { 34 const struct i915_power_well_regs *regs; 35 /* 36 * Synchronize the well's hw state to match the current sw state, for 37 * example enable/disable it based on the current refcount. Called 38 * during driver init and resume time, possibly after first calling 39 * the enable/disable handlers. 40 */ 41 void (*sync_hw)(struct drm_i915_private *i915, 42 struct i915_power_well *power_well); 43 /* 44 * Enable the well and resources that depend on it (for example 45 * interrupts located on the well). Called after the 0->1 refcount 46 * transition. 47 */ 48 void (*enable)(struct drm_i915_private *i915, 49 struct i915_power_well *power_well); 50 /* 51 * Disable the well and resources that depend on it. Called after 52 * the 1->0 refcount transition. 53 */ 54 void (*disable)(struct drm_i915_private *i915, 55 struct i915_power_well *power_well); 56 /* Returns the hw enabled state. */ 57 bool (*is_enabled)(struct drm_i915_private *i915, 58 struct i915_power_well *power_well); 59 }; 60 61 static const struct i915_power_well_instance * 62 i915_power_well_instance(const struct i915_power_well *power_well) 63 { 64 return &power_well->desc->instances->list[power_well->instance_idx]; 65 } 66 67 struct i915_power_well * 68 lookup_power_well(struct drm_i915_private *i915, 69 enum i915_power_well_id power_well_id) 70 { 71 struct i915_power_well *power_well; 72 73 for_each_power_well(i915, power_well) 74 if (i915_power_well_instance(power_well)->id == power_well_id) 75 return power_well; 76 77 /* 78 * It's not feasible to add error checking code to the callers since 79 * this condition really shouldn't happen and it doesn't even make sense 80 * to abort things like display initialization sequences. Just return 81 * the first power well and hope the WARN gets reported so we can fix 82 * our driver. 83 */ 84 drm_WARN(&i915->drm, 1, 85 "Power well %d not defined for this platform\n", 86 power_well_id); 87 return &i915->power_domains.power_wells[0]; 88 } 89 90 void intel_power_well_enable(struct drm_i915_private *i915, 91 struct i915_power_well *power_well) 92 { 93 drm_dbg_kms(&i915->drm, "enabling %s\n", intel_power_well_name(power_well)); 94 power_well->desc->ops->enable(i915, power_well); 95 power_well->hw_enabled = true; 96 } 97 98 void intel_power_well_disable(struct drm_i915_private *i915, 99 struct i915_power_well *power_well) 100 { 101 drm_dbg_kms(&i915->drm, "disabling %s\n", intel_power_well_name(power_well)); 102 power_well->hw_enabled = false; 103 power_well->desc->ops->disable(i915, power_well); 104 } 105 106 void intel_power_well_sync_hw(struct drm_i915_private *i915, 107 struct i915_power_well *power_well) 108 { 109 power_well->desc->ops->sync_hw(i915, power_well); 110 power_well->hw_enabled = 111 power_well->desc->ops->is_enabled(i915, power_well); 112 } 113 114 void intel_power_well_get(struct drm_i915_private *i915, 115 struct i915_power_well *power_well) 116 { 117 if (!power_well->count++) 118 intel_power_well_enable(i915, power_well); 119 } 120 121 void intel_power_well_put(struct drm_i915_private *i915, 122 struct i915_power_well *power_well) 123 { 124 drm_WARN(&i915->drm, !power_well->count, 125 "Use count on power well %s is already zero", 126 i915_power_well_instance(power_well)->name); 127 128 if (!--power_well->count) 129 intel_power_well_disable(i915, power_well); 130 } 131 132 bool intel_power_well_is_enabled(struct drm_i915_private *i915, 133 struct i915_power_well *power_well) 134 { 135 return power_well->desc->ops->is_enabled(i915, power_well); 136 } 137 138 bool intel_power_well_is_enabled_cached(struct i915_power_well *power_well) 139 { 140 return power_well->hw_enabled; 141 } 142 143 bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv, 144 enum i915_power_well_id power_well_id) 145 { 146 struct i915_power_well *power_well; 147 148 power_well = lookup_power_well(dev_priv, power_well_id); 149 150 return intel_power_well_is_enabled(dev_priv, power_well); 151 } 152 153 bool intel_power_well_is_always_on(struct i915_power_well *power_well) 154 { 155 return power_well->desc->always_on; 156 } 157 158 const char *intel_power_well_name(struct i915_power_well *power_well) 159 { 160 return i915_power_well_instance(power_well)->name; 161 } 162 163 struct intel_power_domain_mask *intel_power_well_domains(struct i915_power_well *power_well) 164 { 165 return &power_well->domains; 166 } 167 168 int intel_power_well_refcount(struct i915_power_well *power_well) 169 { 170 return power_well->count; 171 } 172 173 /* 174 * Starting with Haswell, we have a "Power Down Well" that can be turned off 175 * when not needed anymore. We have 4 registers that can request the power well 176 * to be enabled, and it will only be disabled if none of the registers is 177 * requesting it to be enabled. 178 */ 179 static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv, 180 u8 irq_pipe_mask, bool has_vga) 181 { 182 if (has_vga) 183 intel_vga_reset_io_mem(dev_priv); 184 185 if (irq_pipe_mask) 186 gen8_irq_power_well_post_enable(dev_priv, irq_pipe_mask); 187 } 188 189 static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv, 190 u8 irq_pipe_mask) 191 { 192 if (irq_pipe_mask) 193 gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask); 194 } 195 196 #define ICL_AUX_PW_TO_CH(pw_idx) \ 197 ((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A) 198 199 #define ICL_TBT_AUX_PW_TO_CH(pw_idx) \ 200 ((pw_idx) - ICL_PW_CTL_IDX_AUX_TBT1 + AUX_CH_C) 201 202 static enum aux_ch icl_aux_pw_to_ch(const struct i915_power_well *power_well) 203 { 204 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 205 206 return power_well->desc->is_tc_tbt ? ICL_TBT_AUX_PW_TO_CH(pw_idx) : 207 ICL_AUX_PW_TO_CH(pw_idx); 208 } 209 210 static struct intel_digital_port * 211 aux_ch_to_digital_port(struct drm_i915_private *dev_priv, 212 enum aux_ch aux_ch) 213 { 214 struct intel_digital_port *dig_port = NULL; 215 struct intel_encoder *encoder; 216 217 for_each_intel_encoder(&dev_priv->drm, encoder) { 218 /* We'll check the MST primary port */ 219 if (encoder->type == INTEL_OUTPUT_DP_MST) 220 continue; 221 222 dig_port = enc_to_dig_port(encoder); 223 if (!dig_port) 224 continue; 225 226 if (dig_port->aux_ch != aux_ch) { 227 dig_port = NULL; 228 continue; 229 } 230 231 break; 232 } 233 234 return dig_port; 235 } 236 237 static enum phy icl_aux_pw_to_phy(struct drm_i915_private *i915, 238 const struct i915_power_well *power_well) 239 { 240 enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well); 241 struct intel_digital_port *dig_port = aux_ch_to_digital_port(i915, aux_ch); 242 243 return intel_port_to_phy(i915, dig_port->base.port); 244 } 245 246 static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv, 247 struct i915_power_well *power_well, 248 bool timeout_expected) 249 { 250 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 251 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 252 253 /* 254 * For some power wells we're not supposed to watch the status bit for 255 * an ack, but rather just wait a fixed amount of time and then 256 * proceed. This is only used on DG2. 257 */ 258 if (IS_DG2(dev_priv) && power_well->desc->fixed_enable_delay) { 259 usleep_range(600, 1200); 260 return; 261 } 262 263 /* Timeout for PW1:10 us, AUX:not specified, other PWs:20 us. */ 264 if (intel_de_wait_for_set(dev_priv, regs->driver, 265 HSW_PWR_WELL_CTL_STATE(pw_idx), 1)) { 266 drm_dbg_kms(&dev_priv->drm, "%s power well enable timeout\n", 267 intel_power_well_name(power_well)); 268 269 drm_WARN_ON(&dev_priv->drm, !timeout_expected); 270 271 } 272 } 273 274 static u32 hsw_power_well_requesters(struct drm_i915_private *dev_priv, 275 const struct i915_power_well_regs *regs, 276 int pw_idx) 277 { 278 u32 req_mask = HSW_PWR_WELL_CTL_REQ(pw_idx); 279 u32 ret; 280 281 ret = intel_de_read(dev_priv, regs->bios) & req_mask ? 1 : 0; 282 ret |= intel_de_read(dev_priv, regs->driver) & req_mask ? 2 : 0; 283 if (regs->kvmr.reg) 284 ret |= intel_de_read(dev_priv, regs->kvmr) & req_mask ? 4 : 0; 285 ret |= intel_de_read(dev_priv, regs->debug) & req_mask ? 8 : 0; 286 287 return ret; 288 } 289 290 static void hsw_wait_for_power_well_disable(struct drm_i915_private *dev_priv, 291 struct i915_power_well *power_well) 292 { 293 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 294 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 295 bool disabled; 296 u32 reqs; 297 298 /* 299 * Bspec doesn't require waiting for PWs to get disabled, but still do 300 * this for paranoia. The known cases where a PW will be forced on: 301 * - a KVMR request on any power well via the KVMR request register 302 * - a DMC request on PW1 and MISC_IO power wells via the BIOS and 303 * DEBUG request registers 304 * Skip the wait in case any of the request bits are set and print a 305 * diagnostic message. 306 */ 307 wait_for((disabled = !(intel_de_read(dev_priv, regs->driver) & 308 HSW_PWR_WELL_CTL_STATE(pw_idx))) || 309 (reqs = hsw_power_well_requesters(dev_priv, regs, pw_idx)), 1); 310 if (disabled) 311 return; 312 313 drm_dbg_kms(&dev_priv->drm, 314 "%s forced on (bios:%d driver:%d kvmr:%d debug:%d)\n", 315 intel_power_well_name(power_well), 316 !!(reqs & 1), !!(reqs & 2), !!(reqs & 4), !!(reqs & 8)); 317 } 318 319 static void gen9_wait_for_power_well_fuses(struct drm_i915_private *dev_priv, 320 enum skl_power_gate pg) 321 { 322 /* Timeout 5us for PG#0, for other PGs 1us */ 323 drm_WARN_ON(&dev_priv->drm, 324 intel_de_wait_for_set(dev_priv, SKL_FUSE_STATUS, 325 SKL_FUSE_PG_DIST_STATUS(pg), 1)); 326 } 327 328 static void hsw_power_well_enable(struct drm_i915_private *dev_priv, 329 struct i915_power_well *power_well) 330 { 331 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 332 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 333 u32 val; 334 335 if (power_well->desc->has_fuses) { 336 enum skl_power_gate pg; 337 338 pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) : 339 SKL_PW_CTL_IDX_TO_PG(pw_idx); 340 341 /* Wa_16013190616:adlp */ 342 if (IS_ALDERLAKE_P(dev_priv) && pg == SKL_PG1) 343 intel_de_rmw(dev_priv, GEN8_CHICKEN_DCPR_1, 0, DISABLE_FLR_SRC); 344 345 /* 346 * For PW1 we have to wait both for the PW0/PG0 fuse state 347 * before enabling the power well and PW1/PG1's own fuse 348 * state after the enabling. For all other power wells with 349 * fuses we only have to wait for that PW/PG's fuse state 350 * after the enabling. 351 */ 352 if (pg == SKL_PG1) 353 gen9_wait_for_power_well_fuses(dev_priv, SKL_PG0); 354 } 355 356 val = intel_de_read(dev_priv, regs->driver); 357 intel_de_write(dev_priv, regs->driver, 358 val | HSW_PWR_WELL_CTL_REQ(pw_idx)); 359 360 hsw_wait_for_power_well_enable(dev_priv, power_well, false); 361 362 if (power_well->desc->has_fuses) { 363 enum skl_power_gate pg; 364 365 pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) : 366 SKL_PW_CTL_IDX_TO_PG(pw_idx); 367 gen9_wait_for_power_well_fuses(dev_priv, pg); 368 } 369 370 hsw_power_well_post_enable(dev_priv, 371 power_well->desc->irq_pipe_mask, 372 power_well->desc->has_vga); 373 } 374 375 static void hsw_power_well_disable(struct drm_i915_private *dev_priv, 376 struct i915_power_well *power_well) 377 { 378 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 379 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 380 u32 val; 381 382 hsw_power_well_pre_disable(dev_priv, 383 power_well->desc->irq_pipe_mask); 384 385 val = intel_de_read(dev_priv, regs->driver); 386 intel_de_write(dev_priv, regs->driver, 387 val & ~HSW_PWR_WELL_CTL_REQ(pw_idx)); 388 hsw_wait_for_power_well_disable(dev_priv, power_well); 389 } 390 391 static void 392 icl_combo_phy_aux_power_well_enable(struct drm_i915_private *dev_priv, 393 struct i915_power_well *power_well) 394 { 395 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 396 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 397 enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); 398 u32 val; 399 400 drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv)); 401 402 val = intel_de_read(dev_priv, regs->driver); 403 intel_de_write(dev_priv, regs->driver, 404 val | HSW_PWR_WELL_CTL_REQ(pw_idx)); 405 406 if (DISPLAY_VER(dev_priv) < 12) { 407 val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy)); 408 intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy), 409 val | ICL_LANE_ENABLE_AUX); 410 } 411 412 hsw_wait_for_power_well_enable(dev_priv, power_well, false); 413 414 /* Display WA #1178: icl */ 415 if (pw_idx >= ICL_PW_CTL_IDX_AUX_A && pw_idx <= ICL_PW_CTL_IDX_AUX_B && 416 !intel_bios_is_port_edp(dev_priv, (enum port)phy)) { 417 val = intel_de_read(dev_priv, ICL_AUX_ANAOVRD1(pw_idx)); 418 val |= ICL_AUX_ANAOVRD1_ENABLE | ICL_AUX_ANAOVRD1_LDO_BYPASS; 419 intel_de_write(dev_priv, ICL_AUX_ANAOVRD1(pw_idx), val); 420 } 421 } 422 423 static void 424 icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv, 425 struct i915_power_well *power_well) 426 { 427 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 428 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 429 enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); 430 u32 val; 431 432 drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv)); 433 434 val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy)); 435 intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy), 436 val & ~ICL_LANE_ENABLE_AUX); 437 438 val = intel_de_read(dev_priv, regs->driver); 439 intel_de_write(dev_priv, regs->driver, 440 val & ~HSW_PWR_WELL_CTL_REQ(pw_idx)); 441 442 hsw_wait_for_power_well_disable(dev_priv, power_well); 443 } 444 445 #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) 446 447 static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv, 448 struct i915_power_well *power_well, 449 struct intel_digital_port *dig_port) 450 { 451 if (drm_WARN_ON(&dev_priv->drm, !dig_port)) 452 return; 453 454 if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port)) 455 return; 456 457 drm_WARN_ON(&dev_priv->drm, !intel_tc_port_ref_held(dig_port)); 458 } 459 460 #else 461 462 static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv, 463 struct i915_power_well *power_well, 464 struct intel_digital_port *dig_port) 465 { 466 } 467 468 #endif 469 470 #define TGL_AUX_PW_TO_TC_PORT(pw_idx) ((pw_idx) - TGL_PW_CTL_IDX_AUX_TC1) 471 472 static void icl_tc_cold_exit(struct drm_i915_private *i915) 473 { 474 int ret, tries = 0; 475 476 while (1) { 477 ret = snb_pcode_write_timeout(&i915->uncore, ICL_PCODE_EXIT_TCCOLD, 0, 478 250, 1); 479 if (ret != -EAGAIN || ++tries == 3) 480 break; 481 msleep(1); 482 } 483 484 /* Spec states that TC cold exit can take up to 1ms to complete */ 485 if (!ret) 486 msleep(1); 487 488 /* TODO: turn failure into a error as soon i915 CI updates ICL IFWI */ 489 drm_dbg_kms(&i915->drm, "TC cold block %s\n", ret ? "failed" : 490 "succeeded"); 491 } 492 493 static void 494 icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv, 495 struct i915_power_well *power_well) 496 { 497 enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well); 498 struct intel_digital_port *dig_port = aux_ch_to_digital_port(dev_priv, aux_ch); 499 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 500 bool is_tbt = power_well->desc->is_tc_tbt; 501 bool timeout_expected; 502 u32 val; 503 504 icl_tc_port_assert_ref_held(dev_priv, power_well, dig_port); 505 506 val = intel_de_read(dev_priv, DP_AUX_CH_CTL(aux_ch)); 507 val &= ~DP_AUX_CH_CTL_TBT_IO; 508 if (is_tbt) 509 val |= DP_AUX_CH_CTL_TBT_IO; 510 intel_de_write(dev_priv, DP_AUX_CH_CTL(aux_ch), val); 511 512 val = intel_de_read(dev_priv, regs->driver); 513 intel_de_write(dev_priv, regs->driver, 514 val | HSW_PWR_WELL_CTL_REQ(i915_power_well_instance(power_well)->hsw.idx)); 515 516 /* 517 * An AUX timeout is expected if the TBT DP tunnel is down, 518 * or need to enable AUX on a legacy TypeC port as part of the TC-cold 519 * exit sequence. 520 */ 521 timeout_expected = is_tbt || intel_tc_cold_requires_aux_pw(dig_port); 522 if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port)) 523 icl_tc_cold_exit(dev_priv); 524 525 hsw_wait_for_power_well_enable(dev_priv, power_well, timeout_expected); 526 527 if (DISPLAY_VER(dev_priv) >= 12 && !is_tbt) { 528 enum tc_port tc_port; 529 530 tc_port = TGL_AUX_PW_TO_TC_PORT(i915_power_well_instance(power_well)->hsw.idx); 531 intel_de_write(dev_priv, HIP_INDEX_REG(tc_port), 532 HIP_INDEX_VAL(tc_port, 0x2)); 533 534 if (intel_de_wait_for_set(dev_priv, DKL_CMN_UC_DW_27(tc_port), 535 DKL_CMN_UC_DW27_UC_HEALTH, 1)) 536 drm_warn(&dev_priv->drm, 537 "Timeout waiting TC uC health\n"); 538 } 539 } 540 541 static void 542 icl_aux_power_well_enable(struct drm_i915_private *dev_priv, 543 struct i915_power_well *power_well) 544 { 545 enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); 546 547 if (intel_phy_is_tc(dev_priv, phy)) 548 return icl_tc_phy_aux_power_well_enable(dev_priv, power_well); 549 else if (IS_ICELAKE(dev_priv)) 550 return icl_combo_phy_aux_power_well_enable(dev_priv, 551 power_well); 552 else 553 return hsw_power_well_enable(dev_priv, power_well); 554 } 555 556 static void 557 icl_aux_power_well_disable(struct drm_i915_private *dev_priv, 558 struct i915_power_well *power_well) 559 { 560 enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); 561 562 if (intel_phy_is_tc(dev_priv, phy)) 563 return hsw_power_well_disable(dev_priv, power_well); 564 else if (IS_ICELAKE(dev_priv)) 565 return icl_combo_phy_aux_power_well_disable(dev_priv, 566 power_well); 567 else 568 return hsw_power_well_disable(dev_priv, power_well); 569 } 570 571 /* 572 * We should only use the power well if we explicitly asked the hardware to 573 * enable it, so check if it's enabled and also check if we've requested it to 574 * be enabled. 575 */ 576 static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv, 577 struct i915_power_well *power_well) 578 { 579 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 580 enum i915_power_well_id id = i915_power_well_instance(power_well)->id; 581 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 582 u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx) | 583 HSW_PWR_WELL_CTL_STATE(pw_idx); 584 u32 val; 585 586 val = intel_de_read(dev_priv, regs->driver); 587 588 /* 589 * On GEN9 big core due to a DMC bug the driver's request bits for PW1 590 * and the MISC_IO PW will be not restored, so check instead for the 591 * BIOS's own request bits, which are forced-on for these power wells 592 * when exiting DC5/6. 593 */ 594 if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv) && 595 (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO)) 596 val |= intel_de_read(dev_priv, regs->bios); 597 598 return (val & mask) == mask; 599 } 600 601 static void assert_can_enable_dc9(struct drm_i915_private *dev_priv) 602 { 603 drm_WARN_ONCE(&dev_priv->drm, 604 (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC9), 605 "DC9 already programmed to be enabled.\n"); 606 drm_WARN_ONCE(&dev_priv->drm, 607 intel_de_read(dev_priv, DC_STATE_EN) & 608 DC_STATE_EN_UPTO_DC5, 609 "DC5 still not disabled to enable DC9.\n"); 610 drm_WARN_ONCE(&dev_priv->drm, 611 intel_de_read(dev_priv, HSW_PWR_WELL_CTL2) & 612 HSW_PWR_WELL_CTL_REQ(SKL_PW_CTL_IDX_PW_2), 613 "Power well 2 on.\n"); 614 drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv), 615 "Interrupts not disabled yet.\n"); 616 617 /* 618 * TODO: check for the following to verify the conditions to enter DC9 619 * state are satisfied: 620 * 1] Check relevant display engine registers to verify if mode set 621 * disable sequence was followed. 622 * 2] Check if display uninitialize sequence is initialized. 623 */ 624 } 625 626 static void assert_can_disable_dc9(struct drm_i915_private *dev_priv) 627 { 628 drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv), 629 "Interrupts not disabled yet.\n"); 630 drm_WARN_ONCE(&dev_priv->drm, 631 intel_de_read(dev_priv, DC_STATE_EN) & 632 DC_STATE_EN_UPTO_DC5, 633 "DC5 still not disabled.\n"); 634 635 /* 636 * TODO: check for the following to verify DC9 state was indeed 637 * entered before programming to disable it: 638 * 1] Check relevant display engine registers to verify if mode 639 * set disable sequence was followed. 640 * 2] Check if display uninitialize sequence is initialized. 641 */ 642 } 643 644 static void gen9_write_dc_state(struct drm_i915_private *dev_priv, 645 u32 state) 646 { 647 int rewrites = 0; 648 int rereads = 0; 649 u32 v; 650 651 intel_de_write(dev_priv, DC_STATE_EN, state); 652 653 /* It has been observed that disabling the dc6 state sometimes 654 * doesn't stick and dmc keeps returning old value. Make sure 655 * the write really sticks enough times and also force rewrite until 656 * we are confident that state is exactly what we want. 657 */ 658 do { 659 v = intel_de_read(dev_priv, DC_STATE_EN); 660 661 if (v != state) { 662 intel_de_write(dev_priv, DC_STATE_EN, state); 663 rewrites++; 664 rereads = 0; 665 } else if (rereads++ > 5) { 666 break; 667 } 668 669 } while (rewrites < 100); 670 671 if (v != state) 672 drm_err(&dev_priv->drm, 673 "Writing dc state to 0x%x failed, now 0x%x\n", 674 state, v); 675 676 /* Most of the times we need one retry, avoid spam */ 677 if (rewrites > 1) 678 drm_dbg_kms(&dev_priv->drm, 679 "Rewrote dc state to 0x%x %d times\n", 680 state, rewrites); 681 } 682 683 static u32 gen9_dc_mask(struct drm_i915_private *dev_priv) 684 { 685 u32 mask; 686 687 mask = DC_STATE_EN_UPTO_DC5; 688 689 if (DISPLAY_VER(dev_priv) >= 12) 690 mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6 691 | DC_STATE_EN_DC9; 692 else if (DISPLAY_VER(dev_priv) == 11) 693 mask |= DC_STATE_EN_UPTO_DC6 | DC_STATE_EN_DC9; 694 else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) 695 mask |= DC_STATE_EN_DC9; 696 else 697 mask |= DC_STATE_EN_UPTO_DC6; 698 699 return mask; 700 } 701 702 void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv) 703 { 704 u32 val; 705 706 if (!HAS_DISPLAY(dev_priv)) 707 return; 708 709 val = intel_de_read(dev_priv, DC_STATE_EN) & gen9_dc_mask(dev_priv); 710 711 drm_dbg_kms(&dev_priv->drm, 712 "Resetting DC state tracking from %02x to %02x\n", 713 dev_priv->dmc.dc_state, val); 714 dev_priv->dmc.dc_state = val; 715 } 716 717 /** 718 * gen9_set_dc_state - set target display C power state 719 * @dev_priv: i915 device instance 720 * @state: target DC power state 721 * - DC_STATE_DISABLE 722 * - DC_STATE_EN_UPTO_DC5 723 * - DC_STATE_EN_UPTO_DC6 724 * - DC_STATE_EN_DC9 725 * 726 * Signal to DMC firmware/HW the target DC power state passed in @state. 727 * DMC/HW can turn off individual display clocks and power rails when entering 728 * a deeper DC power state (higher in number) and turns these back when exiting 729 * that state to a shallower power state (lower in number). The HW will decide 730 * when to actually enter a given state on an on-demand basis, for instance 731 * depending on the active state of display pipes. The state of display 732 * registers backed by affected power rails are saved/restored as needed. 733 * 734 * Based on the above enabling a deeper DC power state is asynchronous wrt. 735 * enabling it. Disabling a deeper power state is synchronous: for instance 736 * setting %DC_STATE_DISABLE won't complete until all HW resources are turned 737 * back on and register state is restored. This is guaranteed by the MMIO write 738 * to DC_STATE_EN blocking until the state is restored. 739 */ 740 void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state) 741 { 742 u32 val; 743 u32 mask; 744 745 if (!HAS_DISPLAY(dev_priv)) 746 return; 747 748 if (drm_WARN_ON_ONCE(&dev_priv->drm, 749 state & ~dev_priv->dmc.allowed_dc_mask)) 750 state &= dev_priv->dmc.allowed_dc_mask; 751 752 val = intel_de_read(dev_priv, DC_STATE_EN); 753 mask = gen9_dc_mask(dev_priv); 754 drm_dbg_kms(&dev_priv->drm, "Setting DC state from %02x to %02x\n", 755 val & mask, state); 756 757 /* Check if DMC is ignoring our DC state requests */ 758 if ((val & mask) != dev_priv->dmc.dc_state) 759 drm_err(&dev_priv->drm, "DC state mismatch (0x%x -> 0x%x)\n", 760 dev_priv->dmc.dc_state, val & mask); 761 762 val &= ~mask; 763 val |= state; 764 765 gen9_write_dc_state(dev_priv, val); 766 767 dev_priv->dmc.dc_state = val & mask; 768 } 769 770 static void tgl_enable_dc3co(struct drm_i915_private *dev_priv) 771 { 772 drm_dbg_kms(&dev_priv->drm, "Enabling DC3CO\n"); 773 gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO); 774 } 775 776 static void tgl_disable_dc3co(struct drm_i915_private *dev_priv) 777 { 778 u32 val; 779 780 drm_dbg_kms(&dev_priv->drm, "Disabling DC3CO\n"); 781 val = intel_de_read(dev_priv, DC_STATE_EN); 782 val &= ~DC_STATE_DC3CO_STATUS; 783 intel_de_write(dev_priv, DC_STATE_EN, val); 784 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); 785 /* 786 * Delay of 200us DC3CO Exit time B.Spec 49196 787 */ 788 usleep_range(200, 210); 789 } 790 791 static void assert_can_enable_dc5(struct drm_i915_private *dev_priv) 792 { 793 enum i915_power_well_id high_pg; 794 795 /* Power wells at this level and above must be disabled for DC5 entry */ 796 if (DISPLAY_VER(dev_priv) == 12) 797 high_pg = ICL_DISP_PW_3; 798 else 799 high_pg = SKL_DISP_PW_2; 800 801 drm_WARN_ONCE(&dev_priv->drm, 802 intel_display_power_well_is_enabled(dev_priv, high_pg), 803 "Power wells above platform's DC5 limit still enabled.\n"); 804 805 drm_WARN_ONCE(&dev_priv->drm, 806 (intel_de_read(dev_priv, DC_STATE_EN) & 807 DC_STATE_EN_UPTO_DC5), 808 "DC5 already programmed to be enabled.\n"); 809 assert_rpm_wakelock_held(&dev_priv->runtime_pm); 810 811 assert_dmc_loaded(dev_priv); 812 } 813 814 void gen9_enable_dc5(struct drm_i915_private *dev_priv) 815 { 816 assert_can_enable_dc5(dev_priv); 817 818 drm_dbg_kms(&dev_priv->drm, "Enabling DC5\n"); 819 820 /* Wa Display #1183: skl,kbl,cfl */ 821 if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) 822 intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1, 823 intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT); 824 825 gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5); 826 } 827 828 static void assert_can_enable_dc6(struct drm_i915_private *dev_priv) 829 { 830 drm_WARN_ONCE(&dev_priv->drm, 831 intel_de_read(dev_priv, UTIL_PIN_CTL) & UTIL_PIN_ENABLE, 832 "Backlight is not disabled.\n"); 833 drm_WARN_ONCE(&dev_priv->drm, 834 (intel_de_read(dev_priv, DC_STATE_EN) & 835 DC_STATE_EN_UPTO_DC6), 836 "DC6 already programmed to be enabled.\n"); 837 838 assert_dmc_loaded(dev_priv); 839 } 840 841 void skl_enable_dc6(struct drm_i915_private *dev_priv) 842 { 843 assert_can_enable_dc6(dev_priv); 844 845 drm_dbg_kms(&dev_priv->drm, "Enabling DC6\n"); 846 847 /* Wa Display #1183: skl,kbl,cfl */ 848 if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) 849 intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1, 850 intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT); 851 852 gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); 853 } 854 855 void bxt_enable_dc9(struct drm_i915_private *dev_priv) 856 { 857 assert_can_enable_dc9(dev_priv); 858 859 drm_dbg_kms(&dev_priv->drm, "Enabling DC9\n"); 860 /* 861 * Power sequencer reset is not needed on 862 * platforms with South Display Engine on PCH, 863 * because PPS registers are always on. 864 */ 865 if (!HAS_PCH_SPLIT(dev_priv)) 866 intel_pps_reset_all(dev_priv); 867 gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9); 868 } 869 870 void bxt_disable_dc9(struct drm_i915_private *dev_priv) 871 { 872 assert_can_disable_dc9(dev_priv); 873 874 drm_dbg_kms(&dev_priv->drm, "Disabling DC9\n"); 875 876 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); 877 878 intel_pps_unlock_regs_wa(dev_priv); 879 } 880 881 static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, 882 struct i915_power_well *power_well) 883 { 884 const struct i915_power_well_regs *regs = power_well->desc->ops->regs; 885 int pw_idx = i915_power_well_instance(power_well)->hsw.idx; 886 u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx); 887 u32 bios_req = intel_de_read(dev_priv, regs->bios); 888 889 /* Take over the request bit if set by BIOS. */ 890 if (bios_req & mask) { 891 u32 drv_req = intel_de_read(dev_priv, regs->driver); 892 893 if (!(drv_req & mask)) 894 intel_de_write(dev_priv, regs->driver, drv_req | mask); 895 intel_de_write(dev_priv, regs->bios, bios_req & ~mask); 896 } 897 } 898 899 static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, 900 struct i915_power_well *power_well) 901 { 902 bxt_ddi_phy_init(dev_priv, i915_power_well_instance(power_well)->bxt.phy); 903 } 904 905 static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, 906 struct i915_power_well *power_well) 907 { 908 bxt_ddi_phy_uninit(dev_priv, i915_power_well_instance(power_well)->bxt.phy); 909 } 910 911 static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv, 912 struct i915_power_well *power_well) 913 { 914 return bxt_ddi_phy_is_enabled(dev_priv, i915_power_well_instance(power_well)->bxt.phy); 915 } 916 917 static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv) 918 { 919 struct i915_power_well *power_well; 920 921 power_well = lookup_power_well(dev_priv, BXT_DISP_PW_DPIO_CMN_A); 922 if (intel_power_well_refcount(power_well) > 0) 923 bxt_ddi_phy_verify_state(dev_priv, i915_power_well_instance(power_well)->bxt.phy); 924 925 power_well = lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC); 926 if (intel_power_well_refcount(power_well) > 0) 927 bxt_ddi_phy_verify_state(dev_priv, i915_power_well_instance(power_well)->bxt.phy); 928 929 if (IS_GEMINILAKE(dev_priv)) { 930 power_well = lookup_power_well(dev_priv, 931 GLK_DISP_PW_DPIO_CMN_C); 932 if (intel_power_well_refcount(power_well) > 0) 933 bxt_ddi_phy_verify_state(dev_priv, 934 i915_power_well_instance(power_well)->bxt.phy); 935 } 936 } 937 938 static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv, 939 struct i915_power_well *power_well) 940 { 941 return ((intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC3CO) == 0 && 942 (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0); 943 } 944 945 static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv) 946 { 947 u8 hw_enabled_dbuf_slices = intel_enabled_dbuf_slices_mask(dev_priv); 948 u8 enabled_dbuf_slices = dev_priv->dbuf.enabled_slices; 949 950 drm_WARN(&dev_priv->drm, 951 hw_enabled_dbuf_slices != enabled_dbuf_slices, 952 "Unexpected DBuf power power state (0x%08x, expected 0x%08x)\n", 953 hw_enabled_dbuf_slices, 954 enabled_dbuf_slices); 955 } 956 957 void gen9_disable_dc_states(struct drm_i915_private *dev_priv) 958 { 959 struct intel_cdclk_config cdclk_config = {}; 960 961 if (dev_priv->dmc.target_dc_state == DC_STATE_EN_DC3CO) { 962 tgl_disable_dc3co(dev_priv); 963 return; 964 } 965 966 gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); 967 968 if (!HAS_DISPLAY(dev_priv)) 969 return; 970 971 intel_cdclk_get_cdclk(dev_priv, &cdclk_config); 972 /* Can't read out voltage_level so can't use intel_cdclk_changed() */ 973 drm_WARN_ON(&dev_priv->drm, 974 intel_cdclk_needs_modeset(&dev_priv->cdclk.hw, 975 &cdclk_config)); 976 977 gen9_assert_dbuf_enabled(dev_priv); 978 979 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) 980 bxt_verify_ddi_phy_power_wells(dev_priv); 981 982 if (DISPLAY_VER(dev_priv) >= 11) 983 /* 984 * DMC retains HW context only for port A, the other combo 985 * PHY's HW context for port B is lost after DC transitions, 986 * so we need to restore it manually. 987 */ 988 intel_combo_phy_init(dev_priv); 989 } 990 991 static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv, 992 struct i915_power_well *power_well) 993 { 994 gen9_disable_dc_states(dev_priv); 995 } 996 997 static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv, 998 struct i915_power_well *power_well) 999 { 1000 if (!intel_dmc_has_payload(dev_priv)) 1001 return; 1002 1003 switch (dev_priv->dmc.target_dc_state) { 1004 case DC_STATE_EN_DC3CO: 1005 tgl_enable_dc3co(dev_priv); 1006 break; 1007 case DC_STATE_EN_UPTO_DC6: 1008 skl_enable_dc6(dev_priv); 1009 break; 1010 case DC_STATE_EN_UPTO_DC5: 1011 gen9_enable_dc5(dev_priv); 1012 break; 1013 } 1014 } 1015 1016 static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv, 1017 struct i915_power_well *power_well) 1018 { 1019 } 1020 1021 static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv, 1022 struct i915_power_well *power_well) 1023 { 1024 } 1025 1026 static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, 1027 struct i915_power_well *power_well) 1028 { 1029 return true; 1030 } 1031 1032 static void i830_pipes_power_well_enable(struct drm_i915_private *dev_priv, 1033 struct i915_power_well *power_well) 1034 { 1035 if ((intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE) == 0) 1036 i830_enable_pipe(dev_priv, PIPE_A); 1037 if ((intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE) == 0) 1038 i830_enable_pipe(dev_priv, PIPE_B); 1039 } 1040 1041 static void i830_pipes_power_well_disable(struct drm_i915_private *dev_priv, 1042 struct i915_power_well *power_well) 1043 { 1044 i830_disable_pipe(dev_priv, PIPE_B); 1045 i830_disable_pipe(dev_priv, PIPE_A); 1046 } 1047 1048 static bool i830_pipes_power_well_enabled(struct drm_i915_private *dev_priv, 1049 struct i915_power_well *power_well) 1050 { 1051 return intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE && 1052 intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE; 1053 } 1054 1055 static void i830_pipes_power_well_sync_hw(struct drm_i915_private *dev_priv, 1056 struct i915_power_well *power_well) 1057 { 1058 if (intel_power_well_refcount(power_well) > 0) 1059 i830_pipes_power_well_enable(dev_priv, power_well); 1060 else 1061 i830_pipes_power_well_disable(dev_priv, power_well); 1062 } 1063 1064 static void vlv_set_power_well(struct drm_i915_private *dev_priv, 1065 struct i915_power_well *power_well, bool enable) 1066 { 1067 int pw_idx = i915_power_well_instance(power_well)->vlv.idx; 1068 u32 mask; 1069 u32 state; 1070 u32 ctrl; 1071 1072 mask = PUNIT_PWRGT_MASK(pw_idx); 1073 state = enable ? PUNIT_PWRGT_PWR_ON(pw_idx) : 1074 PUNIT_PWRGT_PWR_GATE(pw_idx); 1075 1076 vlv_punit_get(dev_priv); 1077 1078 #define COND \ 1079 ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state) 1080 1081 if (COND) 1082 goto out; 1083 1084 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); 1085 ctrl &= ~mask; 1086 ctrl |= state; 1087 vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl); 1088 1089 if (wait_for(COND, 100)) 1090 drm_err(&dev_priv->drm, 1091 "timeout setting power well state %08x (%08x)\n", 1092 state, 1093 vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); 1094 1095 #undef COND 1096 1097 out: 1098 vlv_punit_put(dev_priv); 1099 } 1100 1101 static void vlv_power_well_enable(struct drm_i915_private *dev_priv, 1102 struct i915_power_well *power_well) 1103 { 1104 vlv_set_power_well(dev_priv, power_well, true); 1105 } 1106 1107 static void vlv_power_well_disable(struct drm_i915_private *dev_priv, 1108 struct i915_power_well *power_well) 1109 { 1110 vlv_set_power_well(dev_priv, power_well, false); 1111 } 1112 1113 static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv, 1114 struct i915_power_well *power_well) 1115 { 1116 int pw_idx = i915_power_well_instance(power_well)->vlv.idx; 1117 bool enabled = false; 1118 u32 mask; 1119 u32 state; 1120 u32 ctrl; 1121 1122 mask = PUNIT_PWRGT_MASK(pw_idx); 1123 ctrl = PUNIT_PWRGT_PWR_ON(pw_idx); 1124 1125 vlv_punit_get(dev_priv); 1126 1127 state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask; 1128 /* 1129 * We only ever set the power-on and power-gate states, anything 1130 * else is unexpected. 1131 */ 1132 drm_WARN_ON(&dev_priv->drm, state != PUNIT_PWRGT_PWR_ON(pw_idx) && 1133 state != PUNIT_PWRGT_PWR_GATE(pw_idx)); 1134 if (state == ctrl) 1135 enabled = true; 1136 1137 /* 1138 * A transient state at this point would mean some unexpected party 1139 * is poking at the power controls too. 1140 */ 1141 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask; 1142 drm_WARN_ON(&dev_priv->drm, ctrl != state); 1143 1144 vlv_punit_put(dev_priv); 1145 1146 return enabled; 1147 } 1148 1149 static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv) 1150 { 1151 u32 val; 1152 1153 /* 1154 * On driver load, a pipe may be active and driving a DSI display. 1155 * Preserve DPOUNIT_CLOCK_GATE_DISABLE to avoid the pipe getting stuck 1156 * (and never recovering) in this case. intel_dsi_post_disable() will 1157 * clear it when we turn off the display. 1158 */ 1159 val = intel_de_read(dev_priv, DSPCLK_GATE_D); 1160 val &= DPOUNIT_CLOCK_GATE_DISABLE; 1161 val |= VRHUNIT_CLOCK_GATE_DISABLE; 1162 intel_de_write(dev_priv, DSPCLK_GATE_D, val); 1163 1164 /* 1165 * Disable trickle feed and enable pnd deadline calculation 1166 */ 1167 intel_de_write(dev_priv, MI_ARB_VLV, 1168 MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE); 1169 intel_de_write(dev_priv, CBR1_VLV, 0); 1170 1171 drm_WARN_ON(&dev_priv->drm, RUNTIME_INFO(dev_priv)->rawclk_freq == 0); 1172 intel_de_write(dev_priv, RAWCLK_FREQ_VLV, 1173 DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq, 1174 1000)); 1175 } 1176 1177 static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) 1178 { 1179 struct intel_encoder *encoder; 1180 enum pipe pipe; 1181 1182 /* 1183 * Enable the CRI clock source so we can get at the 1184 * display and the reference clock for VGA 1185 * hotplug / manual detection. Supposedly DSI also 1186 * needs the ref clock up and running. 1187 * 1188 * CHV DPLL B/C have some issues if VGA mode is enabled. 1189 */ 1190 for_each_pipe(dev_priv, pipe) { 1191 u32 val = intel_de_read(dev_priv, DPLL(pipe)); 1192 1193 val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; 1194 if (pipe != PIPE_A) 1195 val |= DPLL_INTEGRATED_CRI_CLK_VLV; 1196 1197 intel_de_write(dev_priv, DPLL(pipe), val); 1198 } 1199 1200 vlv_init_display_clock_gating(dev_priv); 1201 1202 spin_lock_irq(&dev_priv->irq_lock); 1203 valleyview_enable_display_irqs(dev_priv); 1204 spin_unlock_irq(&dev_priv->irq_lock); 1205 1206 /* 1207 * During driver initialization/resume we can avoid restoring the 1208 * part of the HW/SW state that will be inited anyway explicitly. 1209 */ 1210 if (dev_priv->power_domains.initializing) 1211 return; 1212 1213 intel_hpd_init(dev_priv); 1214 intel_hpd_poll_disable(dev_priv); 1215 1216 /* Re-enable the ADPA, if we have one */ 1217 for_each_intel_encoder(&dev_priv->drm, encoder) { 1218 if (encoder->type == INTEL_OUTPUT_ANALOG) 1219 intel_crt_reset(&encoder->base); 1220 } 1221 1222 intel_vga_redisable_power_on(dev_priv); 1223 1224 intel_pps_unlock_regs_wa(dev_priv); 1225 } 1226 1227 static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) 1228 { 1229 spin_lock_irq(&dev_priv->irq_lock); 1230 valleyview_disable_display_irqs(dev_priv); 1231 spin_unlock_irq(&dev_priv->irq_lock); 1232 1233 /* make sure we're done processing display irqs */ 1234 intel_synchronize_irq(dev_priv); 1235 1236 intel_pps_reset_all(dev_priv); 1237 1238 /* Prevent us from re-enabling polling on accident in late suspend */ 1239 if (!dev_priv->drm.dev->power.is_suspended) 1240 intel_hpd_poll_enable(dev_priv); 1241 } 1242 1243 static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, 1244 struct i915_power_well *power_well) 1245 { 1246 vlv_set_power_well(dev_priv, power_well, true); 1247 1248 vlv_display_power_well_init(dev_priv); 1249 } 1250 1251 static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv, 1252 struct i915_power_well *power_well) 1253 { 1254 vlv_display_power_well_deinit(dev_priv); 1255 1256 vlv_set_power_well(dev_priv, power_well, false); 1257 } 1258 1259 static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, 1260 struct i915_power_well *power_well) 1261 { 1262 /* since ref/cri clock was enabled */ 1263 udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ 1264 1265 vlv_set_power_well(dev_priv, power_well, true); 1266 1267 /* 1268 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - 1269 * 6. De-assert cmn_reset/side_reset. Same as VLV X0. 1270 * a. GUnit 0x2110 bit[0] set to 1 (def 0) 1271 * b. The other bits such as sfr settings / modesel may all 1272 * be set to 0. 1273 * 1274 * This should only be done on init and resume from S3 with 1275 * both PLLs disabled, or we risk losing DPIO and PLL 1276 * synchronization. 1277 */ 1278 intel_de_write(dev_priv, DPIO_CTL, 1279 intel_de_read(dev_priv, DPIO_CTL) | DPIO_CMNRST); 1280 } 1281 1282 static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, 1283 struct i915_power_well *power_well) 1284 { 1285 enum pipe pipe; 1286 1287 for_each_pipe(dev_priv, pipe) 1288 assert_pll_disabled(dev_priv, pipe); 1289 1290 /* Assert common reset */ 1291 intel_de_write(dev_priv, DPIO_CTL, 1292 intel_de_read(dev_priv, DPIO_CTL) & ~DPIO_CMNRST); 1293 1294 vlv_set_power_well(dev_priv, power_well, false); 1295 } 1296 1297 #define BITS_SET(val, bits) (((val) & (bits)) == (bits)) 1298 1299 static void assert_chv_phy_status(struct drm_i915_private *dev_priv) 1300 { 1301 struct i915_power_well *cmn_bc = 1302 lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC); 1303 struct i915_power_well *cmn_d = 1304 lookup_power_well(dev_priv, CHV_DISP_PW_DPIO_CMN_D); 1305 u32 phy_control = dev_priv->chv_phy_control; 1306 u32 phy_status = 0; 1307 u32 phy_status_mask = 0xffffffff; 1308 1309 /* 1310 * The BIOS can leave the PHY is some weird state 1311 * where it doesn't fully power down some parts. 1312 * Disable the asserts until the PHY has been fully 1313 * reset (ie. the power well has been disabled at 1314 * least once). 1315 */ 1316 if (!dev_priv->chv_phy_assert[DPIO_PHY0]) 1317 phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) | 1318 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) | 1319 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) | 1320 PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) | 1321 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) | 1322 PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1)); 1323 1324 if (!dev_priv->chv_phy_assert[DPIO_PHY1]) 1325 phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) | 1326 PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) | 1327 PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1)); 1328 1329 if (intel_power_well_is_enabled(dev_priv, cmn_bc)) { 1330 phy_status |= PHY_POWERGOOD(DPIO_PHY0); 1331 1332 /* this assumes override is only used to enable lanes */ 1333 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0) 1334 phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0); 1335 1336 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0) 1337 phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1); 1338 1339 /* CL1 is on whenever anything is on in either channel */ 1340 if (BITS_SET(phy_control, 1341 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) | 1342 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1))) 1343 phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0); 1344 1345 /* 1346 * The DPLLB check accounts for the pipe B + port A usage 1347 * with CL2 powered up but all the lanes in the second channel 1348 * powered down. 1349 */ 1350 if (BITS_SET(phy_control, 1351 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) && 1352 (intel_de_read(dev_priv, DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0) 1353 phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1); 1354 1355 if (BITS_SET(phy_control, 1356 PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0))) 1357 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0); 1358 if (BITS_SET(phy_control, 1359 PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0))) 1360 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1); 1361 1362 if (BITS_SET(phy_control, 1363 PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1))) 1364 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0); 1365 if (BITS_SET(phy_control, 1366 PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1))) 1367 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1); 1368 } 1369 1370 if (intel_power_well_is_enabled(dev_priv, cmn_d)) { 1371 phy_status |= PHY_POWERGOOD(DPIO_PHY1); 1372 1373 /* this assumes override is only used to enable lanes */ 1374 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0) 1375 phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0); 1376 1377 if (BITS_SET(phy_control, 1378 PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0))) 1379 phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0); 1380 1381 if (BITS_SET(phy_control, 1382 PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0))) 1383 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0); 1384 if (BITS_SET(phy_control, 1385 PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0))) 1386 phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1); 1387 } 1388 1389 phy_status &= phy_status_mask; 1390 1391 /* 1392 * The PHY may be busy with some initial calibration and whatnot, 1393 * so the power state can take a while to actually change. 1394 */ 1395 if (intel_de_wait_for_register(dev_priv, DISPLAY_PHY_STATUS, 1396 phy_status_mask, phy_status, 10)) 1397 drm_err(&dev_priv->drm, 1398 "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n", 1399 intel_de_read(dev_priv, DISPLAY_PHY_STATUS) & phy_status_mask, 1400 phy_status, dev_priv->chv_phy_control); 1401 } 1402 1403 #undef BITS_SET 1404 1405 static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, 1406 struct i915_power_well *power_well) 1407 { 1408 enum i915_power_well_id id = i915_power_well_instance(power_well)->id; 1409 enum dpio_phy phy; 1410 enum pipe pipe; 1411 u32 tmp; 1412 1413 drm_WARN_ON_ONCE(&dev_priv->drm, 1414 id != VLV_DISP_PW_DPIO_CMN_BC && 1415 id != CHV_DISP_PW_DPIO_CMN_D); 1416 1417 if (id == VLV_DISP_PW_DPIO_CMN_BC) { 1418 pipe = PIPE_A; 1419 phy = DPIO_PHY0; 1420 } else { 1421 pipe = PIPE_C; 1422 phy = DPIO_PHY1; 1423 } 1424 1425 /* since ref/cri clock was enabled */ 1426 udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ 1427 vlv_set_power_well(dev_priv, power_well, true); 1428 1429 /* Poll for phypwrgood signal */ 1430 if (intel_de_wait_for_set(dev_priv, DISPLAY_PHY_STATUS, 1431 PHY_POWERGOOD(phy), 1)) 1432 drm_err(&dev_priv->drm, "Display PHY %d is not power up\n", 1433 phy); 1434 1435 vlv_dpio_get(dev_priv); 1436 1437 /* Enable dynamic power down */ 1438 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28); 1439 tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN | 1440 DPIO_SUS_CLK_CONFIG_GATE_CLKREQ; 1441 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp); 1442 1443 if (id == VLV_DISP_PW_DPIO_CMN_BC) { 1444 tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1); 1445 tmp |= DPIO_DYNPWRDOWNEN_CH1; 1446 vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp); 1447 } else { 1448 /* 1449 * Force the non-existing CL2 off. BXT does this 1450 * too, so maybe it saves some power even though 1451 * CL2 doesn't exist? 1452 */ 1453 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); 1454 tmp |= DPIO_CL2_LDOFUSE_PWRENB; 1455 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp); 1456 } 1457 1458 vlv_dpio_put(dev_priv); 1459 1460 dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy); 1461 intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, 1462 dev_priv->chv_phy_control); 1463 1464 drm_dbg_kms(&dev_priv->drm, 1465 "Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", 1466 phy, dev_priv->chv_phy_control); 1467 1468 assert_chv_phy_status(dev_priv); 1469 } 1470 1471 static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, 1472 struct i915_power_well *power_well) 1473 { 1474 enum i915_power_well_id id = i915_power_well_instance(power_well)->id; 1475 enum dpio_phy phy; 1476 1477 drm_WARN_ON_ONCE(&dev_priv->drm, 1478 id != VLV_DISP_PW_DPIO_CMN_BC && 1479 id != CHV_DISP_PW_DPIO_CMN_D); 1480 1481 if (id == VLV_DISP_PW_DPIO_CMN_BC) { 1482 phy = DPIO_PHY0; 1483 assert_pll_disabled(dev_priv, PIPE_A); 1484 assert_pll_disabled(dev_priv, PIPE_B); 1485 } else { 1486 phy = DPIO_PHY1; 1487 assert_pll_disabled(dev_priv, PIPE_C); 1488 } 1489 1490 dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy); 1491 intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, 1492 dev_priv->chv_phy_control); 1493 1494 vlv_set_power_well(dev_priv, power_well, false); 1495 1496 drm_dbg_kms(&dev_priv->drm, 1497 "Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", 1498 phy, dev_priv->chv_phy_control); 1499 1500 /* PHY is fully reset now, so we can enable the PHY state asserts */ 1501 dev_priv->chv_phy_assert[phy] = true; 1502 1503 assert_chv_phy_status(dev_priv); 1504 } 1505 1506 static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy, 1507 enum dpio_channel ch, bool override, unsigned int mask) 1508 { 1509 enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C; 1510 u32 reg, val, expected, actual; 1511 1512 /* 1513 * The BIOS can leave the PHY is some weird state 1514 * where it doesn't fully power down some parts. 1515 * Disable the asserts until the PHY has been fully 1516 * reset (ie. the power well has been disabled at 1517 * least once). 1518 */ 1519 if (!dev_priv->chv_phy_assert[phy]) 1520 return; 1521 1522 if (ch == DPIO_CH0) 1523 reg = _CHV_CMN_DW0_CH0; 1524 else 1525 reg = _CHV_CMN_DW6_CH1; 1526 1527 vlv_dpio_get(dev_priv); 1528 val = vlv_dpio_read(dev_priv, pipe, reg); 1529 vlv_dpio_put(dev_priv); 1530 1531 /* 1532 * This assumes !override is only used when the port is disabled. 1533 * All lanes should power down even without the override when 1534 * the port is disabled. 1535 */ 1536 if (!override || mask == 0xf) { 1537 expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; 1538 /* 1539 * If CH1 common lane is not active anymore 1540 * (eg. for pipe B DPLL) the entire channel will 1541 * shut down, which causes the common lane registers 1542 * to read as 0. That means we can't actually check 1543 * the lane power down status bits, but as the entire 1544 * register reads as 0 it's a good indication that the 1545 * channel is indeed entirely powered down. 1546 */ 1547 if (ch == DPIO_CH1 && val == 0) 1548 expected = 0; 1549 } else if (mask != 0x0) { 1550 expected = DPIO_ANYDL_POWERDOWN; 1551 } else { 1552 expected = 0; 1553 } 1554 1555 if (ch == DPIO_CH0) 1556 actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0; 1557 else 1558 actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1; 1559 actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; 1560 1561 drm_WARN(&dev_priv->drm, actual != expected, 1562 "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n", 1563 !!(actual & DPIO_ALLDL_POWERDOWN), 1564 !!(actual & DPIO_ANYDL_POWERDOWN), 1565 !!(expected & DPIO_ALLDL_POWERDOWN), 1566 !!(expected & DPIO_ANYDL_POWERDOWN), 1567 reg, val); 1568 } 1569 1570 bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy, 1571 enum dpio_channel ch, bool override) 1572 { 1573 struct i915_power_domains *power_domains = &dev_priv->power_domains; 1574 bool was_override; 1575 1576 mutex_lock(&power_domains->lock); 1577 1578 was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); 1579 1580 if (override == was_override) 1581 goto out; 1582 1583 if (override) 1584 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); 1585 else 1586 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); 1587 1588 intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, 1589 dev_priv->chv_phy_control); 1590 1591 drm_dbg_kms(&dev_priv->drm, 1592 "Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n", 1593 phy, ch, dev_priv->chv_phy_control); 1594 1595 assert_chv_phy_status(dev_priv); 1596 1597 out: 1598 mutex_unlock(&power_domains->lock); 1599 1600 return was_override; 1601 } 1602 1603 void chv_phy_powergate_lanes(struct intel_encoder *encoder, 1604 bool override, unsigned int mask) 1605 { 1606 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1607 struct i915_power_domains *power_domains = &dev_priv->power_domains; 1608 enum dpio_phy phy = vlv_dig_port_to_phy(enc_to_dig_port(encoder)); 1609 enum dpio_channel ch = vlv_dig_port_to_channel(enc_to_dig_port(encoder)); 1610 1611 mutex_lock(&power_domains->lock); 1612 1613 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch); 1614 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch); 1615 1616 if (override) 1617 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); 1618 else 1619 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); 1620 1621 intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, 1622 dev_priv->chv_phy_control); 1623 1624 drm_dbg_kms(&dev_priv->drm, 1625 "Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n", 1626 phy, ch, mask, dev_priv->chv_phy_control); 1627 1628 assert_chv_phy_status(dev_priv); 1629 1630 assert_chv_phy_powergate(dev_priv, phy, ch, override, mask); 1631 1632 mutex_unlock(&power_domains->lock); 1633 } 1634 1635 static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv, 1636 struct i915_power_well *power_well) 1637 { 1638 enum pipe pipe = PIPE_A; 1639 bool enabled; 1640 u32 state, ctrl; 1641 1642 vlv_punit_get(dev_priv); 1643 1644 state = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe); 1645 /* 1646 * We only ever set the power-on and power-gate states, anything 1647 * else is unexpected. 1648 */ 1649 drm_WARN_ON(&dev_priv->drm, state != DP_SSS_PWR_ON(pipe) && 1650 state != DP_SSS_PWR_GATE(pipe)); 1651 enabled = state == DP_SSS_PWR_ON(pipe); 1652 1653 /* 1654 * A transient state at this point would mean some unexpected party 1655 * is poking at the power controls too. 1656 */ 1657 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSC_MASK(pipe); 1658 drm_WARN_ON(&dev_priv->drm, ctrl << 16 != state); 1659 1660 vlv_punit_put(dev_priv); 1661 1662 return enabled; 1663 } 1664 1665 static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, 1666 struct i915_power_well *power_well, 1667 bool enable) 1668 { 1669 enum pipe pipe = PIPE_A; 1670 u32 state; 1671 u32 ctrl; 1672 1673 state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe); 1674 1675 vlv_punit_get(dev_priv); 1676 1677 #define COND \ 1678 ((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe)) == state) 1679 1680 if (COND) 1681 goto out; 1682 1683 ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); 1684 ctrl &= ~DP_SSC_MASK(pipe); 1685 ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); 1686 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, ctrl); 1687 1688 if (wait_for(COND, 100)) 1689 drm_err(&dev_priv->drm, 1690 "timeout setting power well state %08x (%08x)\n", 1691 state, 1692 vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM)); 1693 1694 #undef COND 1695 1696 out: 1697 vlv_punit_put(dev_priv); 1698 } 1699 1700 static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv, 1701 struct i915_power_well *power_well) 1702 { 1703 intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, 1704 dev_priv->chv_phy_control); 1705 } 1706 1707 static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv, 1708 struct i915_power_well *power_well) 1709 { 1710 chv_set_pipe_power_well(dev_priv, power_well, true); 1711 1712 vlv_display_power_well_init(dev_priv); 1713 } 1714 1715 static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv, 1716 struct i915_power_well *power_well) 1717 { 1718 vlv_display_power_well_deinit(dev_priv); 1719 1720 chv_set_pipe_power_well(dev_priv, power_well, false); 1721 } 1722 1723 static void 1724 tgl_tc_cold_request(struct drm_i915_private *i915, bool block) 1725 { 1726 u8 tries = 0; 1727 int ret; 1728 1729 while (1) { 1730 u32 low_val; 1731 u32 high_val = 0; 1732 1733 if (block) 1734 low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ; 1735 else 1736 low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ; 1737 1738 /* 1739 * Spec states that we should timeout the request after 200us 1740 * but the function below will timeout after 500us 1741 */ 1742 ret = snb_pcode_read(&i915->uncore, TGL_PCODE_TCCOLD, &low_val, &high_val); 1743 if (ret == 0) { 1744 if (block && 1745 (low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED)) 1746 ret = -EIO; 1747 else 1748 break; 1749 } 1750 1751 if (++tries == 3) 1752 break; 1753 1754 msleep(1); 1755 } 1756 1757 if (ret) 1758 drm_err(&i915->drm, "TC cold %sblock failed\n", 1759 block ? "" : "un"); 1760 else 1761 drm_dbg_kms(&i915->drm, "TC cold %sblock succeeded\n", 1762 block ? "" : "un"); 1763 } 1764 1765 static void 1766 tgl_tc_cold_off_power_well_enable(struct drm_i915_private *i915, 1767 struct i915_power_well *power_well) 1768 { 1769 tgl_tc_cold_request(i915, true); 1770 } 1771 1772 static void 1773 tgl_tc_cold_off_power_well_disable(struct drm_i915_private *i915, 1774 struct i915_power_well *power_well) 1775 { 1776 tgl_tc_cold_request(i915, false); 1777 } 1778 1779 static void 1780 tgl_tc_cold_off_power_well_sync_hw(struct drm_i915_private *i915, 1781 struct i915_power_well *power_well) 1782 { 1783 if (intel_power_well_refcount(power_well) > 0) 1784 tgl_tc_cold_off_power_well_enable(i915, power_well); 1785 else 1786 tgl_tc_cold_off_power_well_disable(i915, power_well); 1787 } 1788 1789 static bool 1790 tgl_tc_cold_off_power_well_is_enabled(struct drm_i915_private *dev_priv, 1791 struct i915_power_well *power_well) 1792 { 1793 /* 1794 * Not the correctly implementation but there is no way to just read it 1795 * from PCODE, so returning count to avoid state mismatch errors 1796 */ 1797 return intel_power_well_refcount(power_well); 1798 } 1799 1800 1801 const struct i915_power_well_ops i9xx_always_on_power_well_ops = { 1802 .sync_hw = i9xx_power_well_sync_hw_noop, 1803 .enable = i9xx_always_on_power_well_noop, 1804 .disable = i9xx_always_on_power_well_noop, 1805 .is_enabled = i9xx_always_on_power_well_enabled, 1806 }; 1807 1808 const struct i915_power_well_ops chv_pipe_power_well_ops = { 1809 .sync_hw = chv_pipe_power_well_sync_hw, 1810 .enable = chv_pipe_power_well_enable, 1811 .disable = chv_pipe_power_well_disable, 1812 .is_enabled = chv_pipe_power_well_enabled, 1813 }; 1814 1815 const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = { 1816 .sync_hw = i9xx_power_well_sync_hw_noop, 1817 .enable = chv_dpio_cmn_power_well_enable, 1818 .disable = chv_dpio_cmn_power_well_disable, 1819 .is_enabled = vlv_power_well_enabled, 1820 }; 1821 1822 const struct i915_power_well_ops i830_pipes_power_well_ops = { 1823 .sync_hw = i830_pipes_power_well_sync_hw, 1824 .enable = i830_pipes_power_well_enable, 1825 .disable = i830_pipes_power_well_disable, 1826 .is_enabled = i830_pipes_power_well_enabled, 1827 }; 1828 1829 static const struct i915_power_well_regs hsw_power_well_regs = { 1830 .bios = HSW_PWR_WELL_CTL1, 1831 .driver = HSW_PWR_WELL_CTL2, 1832 .kvmr = HSW_PWR_WELL_CTL3, 1833 .debug = HSW_PWR_WELL_CTL4, 1834 }; 1835 1836 const struct i915_power_well_ops hsw_power_well_ops = { 1837 .regs = &hsw_power_well_regs, 1838 .sync_hw = hsw_power_well_sync_hw, 1839 .enable = hsw_power_well_enable, 1840 .disable = hsw_power_well_disable, 1841 .is_enabled = hsw_power_well_enabled, 1842 }; 1843 1844 const struct i915_power_well_ops gen9_dc_off_power_well_ops = { 1845 .sync_hw = i9xx_power_well_sync_hw_noop, 1846 .enable = gen9_dc_off_power_well_enable, 1847 .disable = gen9_dc_off_power_well_disable, 1848 .is_enabled = gen9_dc_off_power_well_enabled, 1849 }; 1850 1851 const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = { 1852 .sync_hw = i9xx_power_well_sync_hw_noop, 1853 .enable = bxt_dpio_cmn_power_well_enable, 1854 .disable = bxt_dpio_cmn_power_well_disable, 1855 .is_enabled = bxt_dpio_cmn_power_well_enabled, 1856 }; 1857 1858 const struct i915_power_well_ops vlv_display_power_well_ops = { 1859 .sync_hw = i9xx_power_well_sync_hw_noop, 1860 .enable = vlv_display_power_well_enable, 1861 .disable = vlv_display_power_well_disable, 1862 .is_enabled = vlv_power_well_enabled, 1863 }; 1864 1865 const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = { 1866 .sync_hw = i9xx_power_well_sync_hw_noop, 1867 .enable = vlv_dpio_cmn_power_well_enable, 1868 .disable = vlv_dpio_cmn_power_well_disable, 1869 .is_enabled = vlv_power_well_enabled, 1870 }; 1871 1872 const struct i915_power_well_ops vlv_dpio_power_well_ops = { 1873 .sync_hw = i9xx_power_well_sync_hw_noop, 1874 .enable = vlv_power_well_enable, 1875 .disable = vlv_power_well_disable, 1876 .is_enabled = vlv_power_well_enabled, 1877 }; 1878 1879 static const struct i915_power_well_regs icl_aux_power_well_regs = { 1880 .bios = ICL_PWR_WELL_CTL_AUX1, 1881 .driver = ICL_PWR_WELL_CTL_AUX2, 1882 .debug = ICL_PWR_WELL_CTL_AUX4, 1883 }; 1884 1885 const struct i915_power_well_ops icl_aux_power_well_ops = { 1886 .regs = &icl_aux_power_well_regs, 1887 .sync_hw = hsw_power_well_sync_hw, 1888 .enable = icl_aux_power_well_enable, 1889 .disable = icl_aux_power_well_disable, 1890 .is_enabled = hsw_power_well_enabled, 1891 }; 1892 1893 static const struct i915_power_well_regs icl_ddi_power_well_regs = { 1894 .bios = ICL_PWR_WELL_CTL_DDI1, 1895 .driver = ICL_PWR_WELL_CTL_DDI2, 1896 .debug = ICL_PWR_WELL_CTL_DDI4, 1897 }; 1898 1899 const struct i915_power_well_ops icl_ddi_power_well_ops = { 1900 .regs = &icl_ddi_power_well_regs, 1901 .sync_hw = hsw_power_well_sync_hw, 1902 .enable = hsw_power_well_enable, 1903 .disable = hsw_power_well_disable, 1904 .is_enabled = hsw_power_well_enabled, 1905 }; 1906 1907 const struct i915_power_well_ops tgl_tc_cold_off_ops = { 1908 .sync_hw = tgl_tc_cold_off_power_well_sync_hw, 1909 .enable = tgl_tc_cold_off_power_well_enable, 1910 .disable = tgl_tc_cold_off_power_well_disable, 1911 .is_enabled = tgl_tc_cold_off_power_well_is_enabled, 1912 }; 1913