1 /* 2 * Copyright © 2006-2007 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Authors: 24 * Eric Anholt <eric@anholt.net> 25 */ 26 27 #include <linux/dmi.h> 28 #include <linux/i2c.h> 29 #include <linux/slab.h> 30 31 #include <drm/drm_atomic_helper.h> 32 #include <drm/drm_crtc.h> 33 #include <drm/drm_edid.h> 34 #include <drm/drm_probe_helper.h> 35 36 #include "i915_drv.h" 37 #include "intel_connector.h" 38 #include "intel_crt.h" 39 #include "intel_ddi.h" 40 #include "intel_display_types.h" 41 #include "intel_fifo_underrun.h" 42 #include "intel_gmbus.h" 43 #include "intel_hotplug.h" 44 45 /* Here's the desired hotplug mode */ 46 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \ 47 ADPA_CRT_HOTPLUG_WARMUP_10MS | \ 48 ADPA_CRT_HOTPLUG_SAMPLE_4S | \ 49 ADPA_CRT_HOTPLUG_VOLTAGE_50 | \ 50 ADPA_CRT_HOTPLUG_VOLREF_325MV | \ 51 ADPA_CRT_HOTPLUG_ENABLE) 52 53 struct intel_crt { 54 struct intel_encoder base; 55 /* DPMS state is stored in the connector, which we need in the 56 * encoder's enable/disable callbacks */ 57 struct intel_connector *connector; 58 bool force_hotplug_required; 59 i915_reg_t adpa_reg; 60 }; 61 62 static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder) 63 { 64 return container_of(encoder, struct intel_crt, base); 65 } 66 67 static struct intel_crt *intel_attached_crt(struct intel_connector *connector) 68 { 69 return intel_encoder_to_crt(intel_attached_encoder(connector)); 70 } 71 72 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv, 73 i915_reg_t adpa_reg, enum pipe *pipe) 74 { 75 u32 val; 76 77 val = intel_de_read(dev_priv, adpa_reg); 78 79 /* asserts want to know the pipe even if the port is disabled */ 80 if (HAS_PCH_CPT(dev_priv)) 81 *pipe = (val & ADPA_PIPE_SEL_MASK_CPT) >> ADPA_PIPE_SEL_SHIFT_CPT; 82 else 83 *pipe = (val & ADPA_PIPE_SEL_MASK) >> ADPA_PIPE_SEL_SHIFT; 84 85 return val & ADPA_DAC_ENABLE; 86 } 87 88 static bool intel_crt_get_hw_state(struct intel_encoder *encoder, 89 enum pipe *pipe) 90 { 91 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 92 struct intel_crt *crt = intel_encoder_to_crt(encoder); 93 intel_wakeref_t wakeref; 94 bool ret; 95 96 wakeref = intel_display_power_get_if_enabled(dev_priv, 97 encoder->power_domain); 98 if (!wakeref) 99 return false; 100 101 ret = intel_crt_port_enabled(dev_priv, crt->adpa_reg, pipe); 102 103 intel_display_power_put(dev_priv, encoder->power_domain, wakeref); 104 105 return ret; 106 } 107 108 static unsigned int intel_crt_get_flags(struct intel_encoder *encoder) 109 { 110 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 111 struct intel_crt *crt = intel_encoder_to_crt(encoder); 112 u32 tmp, flags = 0; 113 114 tmp = intel_de_read(dev_priv, crt->adpa_reg); 115 116 if (tmp & ADPA_HSYNC_ACTIVE_HIGH) 117 flags |= DRM_MODE_FLAG_PHSYNC; 118 else 119 flags |= DRM_MODE_FLAG_NHSYNC; 120 121 if (tmp & ADPA_VSYNC_ACTIVE_HIGH) 122 flags |= DRM_MODE_FLAG_PVSYNC; 123 else 124 flags |= DRM_MODE_FLAG_NVSYNC; 125 126 return flags; 127 } 128 129 static void intel_crt_get_config(struct intel_encoder *encoder, 130 struct intel_crtc_state *pipe_config) 131 { 132 pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG); 133 134 pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder); 135 136 pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock; 137 } 138 139 static void hsw_crt_get_config(struct intel_encoder *encoder, 140 struct intel_crtc_state *pipe_config) 141 { 142 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 143 144 intel_ddi_get_config(encoder, pipe_config); 145 146 pipe_config->hw.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC | 147 DRM_MODE_FLAG_NHSYNC | 148 DRM_MODE_FLAG_PVSYNC | 149 DRM_MODE_FLAG_NVSYNC); 150 pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder); 151 152 pipe_config->hw.adjusted_mode.crtc_clock = lpt_get_iclkip(dev_priv); 153 } 154 155 /* Note: The caller is required to filter out dpms modes not supported by the 156 * platform. */ 157 static void intel_crt_set_dpms(struct intel_encoder *encoder, 158 const struct intel_crtc_state *crtc_state, 159 int mode) 160 { 161 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 162 struct intel_crt *crt = intel_encoder_to_crt(encoder); 163 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 164 const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; 165 u32 adpa; 166 167 if (INTEL_GEN(dev_priv) >= 5) 168 adpa = ADPA_HOTPLUG_BITS; 169 else 170 adpa = 0; 171 172 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) 173 adpa |= ADPA_HSYNC_ACTIVE_HIGH; 174 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) 175 adpa |= ADPA_VSYNC_ACTIVE_HIGH; 176 177 /* For CPT allow 3 pipe config, for others just use A or B */ 178 if (HAS_PCH_LPT(dev_priv)) 179 ; /* Those bits don't exist here */ 180 else if (HAS_PCH_CPT(dev_priv)) 181 adpa |= ADPA_PIPE_SEL_CPT(crtc->pipe); 182 else 183 adpa |= ADPA_PIPE_SEL(crtc->pipe); 184 185 if (!HAS_PCH_SPLIT(dev_priv)) 186 intel_de_write(dev_priv, BCLRPAT(crtc->pipe), 0); 187 188 switch (mode) { 189 case DRM_MODE_DPMS_ON: 190 adpa |= ADPA_DAC_ENABLE; 191 break; 192 case DRM_MODE_DPMS_STANDBY: 193 adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; 194 break; 195 case DRM_MODE_DPMS_SUSPEND: 196 adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; 197 break; 198 case DRM_MODE_DPMS_OFF: 199 adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; 200 break; 201 } 202 203 intel_de_write(dev_priv, crt->adpa_reg, adpa); 204 } 205 206 static void intel_disable_crt(struct intel_atomic_state *state, 207 struct intel_encoder *encoder, 208 const struct intel_crtc_state *old_crtc_state, 209 const struct drm_connector_state *old_conn_state) 210 { 211 intel_crt_set_dpms(encoder, old_crtc_state, DRM_MODE_DPMS_OFF); 212 } 213 214 static void pch_disable_crt(struct intel_atomic_state *state, 215 struct intel_encoder *encoder, 216 const struct intel_crtc_state *old_crtc_state, 217 const struct drm_connector_state *old_conn_state) 218 { 219 } 220 221 static void pch_post_disable_crt(struct intel_atomic_state *state, 222 struct intel_encoder *encoder, 223 const struct intel_crtc_state *old_crtc_state, 224 const struct drm_connector_state *old_conn_state) 225 { 226 intel_disable_crt(state, encoder, old_crtc_state, old_conn_state); 227 } 228 229 static void hsw_disable_crt(struct intel_atomic_state *state, 230 struct intel_encoder *encoder, 231 const struct intel_crtc_state *old_crtc_state, 232 const struct drm_connector_state *old_conn_state) 233 { 234 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 235 236 drm_WARN_ON(&dev_priv->drm, !old_crtc_state->has_pch_encoder); 237 238 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); 239 } 240 241 static void hsw_post_disable_crt(struct intel_atomic_state *state, 242 struct intel_encoder *encoder, 243 const struct intel_crtc_state *old_crtc_state, 244 const struct drm_connector_state *old_conn_state) 245 { 246 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 247 248 intel_crtc_vblank_off(old_crtc_state); 249 250 intel_disable_pipe(old_crtc_state); 251 252 intel_ddi_disable_transcoder_func(old_crtc_state); 253 254 ilk_pfit_disable(old_crtc_state); 255 256 intel_ddi_disable_pipe_clock(old_crtc_state); 257 258 pch_post_disable_crt(state, encoder, old_crtc_state, old_conn_state); 259 260 lpt_disable_pch_transcoder(dev_priv); 261 lpt_disable_iclkip(dev_priv); 262 263 intel_ddi_fdi_post_disable(state, encoder, old_crtc_state, old_conn_state); 264 265 drm_WARN_ON(&dev_priv->drm, !old_crtc_state->has_pch_encoder); 266 267 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); 268 } 269 270 static void hsw_pre_pll_enable_crt(struct intel_atomic_state *state, 271 struct intel_encoder *encoder, 272 const struct intel_crtc_state *crtc_state, 273 const struct drm_connector_state *conn_state) 274 { 275 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 276 277 drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder); 278 279 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); 280 } 281 282 static void hsw_pre_enable_crt(struct intel_atomic_state *state, 283 struct intel_encoder *encoder, 284 const struct intel_crtc_state *crtc_state, 285 const struct drm_connector_state *conn_state) 286 { 287 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 288 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 289 enum pipe pipe = crtc->pipe; 290 291 drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder); 292 293 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); 294 295 hsw_fdi_link_train(encoder, crtc_state); 296 297 intel_ddi_enable_pipe_clock(encoder, crtc_state); 298 } 299 300 static void hsw_enable_crt(struct intel_atomic_state *state, 301 struct intel_encoder *encoder, 302 const struct intel_crtc_state *crtc_state, 303 const struct drm_connector_state *conn_state) 304 { 305 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 306 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 307 enum pipe pipe = crtc->pipe; 308 309 drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder); 310 311 intel_ddi_enable_transcoder_func(encoder, crtc_state); 312 313 intel_enable_pipe(crtc_state); 314 315 lpt_pch_enable(crtc_state); 316 317 intel_crtc_vblank_on(crtc_state); 318 319 intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON); 320 321 intel_wait_for_vblank(dev_priv, pipe); 322 intel_wait_for_vblank(dev_priv, pipe); 323 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); 324 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); 325 } 326 327 static void intel_enable_crt(struct intel_atomic_state *state, 328 struct intel_encoder *encoder, 329 const struct intel_crtc_state *crtc_state, 330 const struct drm_connector_state *conn_state) 331 { 332 intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON); 333 } 334 335 static enum drm_mode_status 336 intel_crt_mode_valid(struct drm_connector *connector, 337 struct drm_display_mode *mode) 338 { 339 struct drm_device *dev = connector->dev; 340 struct drm_i915_private *dev_priv = to_i915(dev); 341 int max_dotclk = dev_priv->max_dotclk_freq; 342 int max_clock; 343 344 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) 345 return MODE_NO_DBLESCAN; 346 347 if (mode->clock < 25000) 348 return MODE_CLOCK_LOW; 349 350 if (HAS_PCH_LPT(dev_priv)) 351 max_clock = 180000; 352 else if (IS_VALLEYVIEW(dev_priv)) 353 /* 354 * 270 MHz due to current DPLL limits, 355 * DAC limit supposedly 355 MHz. 356 */ 357 max_clock = 270000; 358 else if (IS_GEN_RANGE(dev_priv, 3, 4)) 359 max_clock = 400000; 360 else 361 max_clock = 350000; 362 if (mode->clock > max_clock) 363 return MODE_CLOCK_HIGH; 364 365 if (mode->clock > max_dotclk) 366 return MODE_CLOCK_HIGH; 367 368 /* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */ 369 if (HAS_PCH_LPT(dev_priv) && 370 ilk_get_lanes_required(mode->clock, 270000, 24) > 2) 371 return MODE_CLOCK_HIGH; 372 373 /* HSW/BDW FDI limited to 4k */ 374 if (mode->hdisplay > 4096) 375 return MODE_H_ILLEGAL; 376 377 return MODE_OK; 378 } 379 380 static int intel_crt_compute_config(struct intel_encoder *encoder, 381 struct intel_crtc_state *pipe_config, 382 struct drm_connector_state *conn_state) 383 { 384 struct drm_display_mode *adjusted_mode = 385 &pipe_config->hw.adjusted_mode; 386 387 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 388 return -EINVAL; 389 390 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; 391 392 return 0; 393 } 394 395 static int pch_crt_compute_config(struct intel_encoder *encoder, 396 struct intel_crtc_state *pipe_config, 397 struct drm_connector_state *conn_state) 398 { 399 struct drm_display_mode *adjusted_mode = 400 &pipe_config->hw.adjusted_mode; 401 402 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 403 return -EINVAL; 404 405 pipe_config->has_pch_encoder = true; 406 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; 407 408 return 0; 409 } 410 411 static int hsw_crt_compute_config(struct intel_encoder *encoder, 412 struct intel_crtc_state *pipe_config, 413 struct drm_connector_state *conn_state) 414 { 415 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 416 struct drm_display_mode *adjusted_mode = 417 &pipe_config->hw.adjusted_mode; 418 419 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 420 return -EINVAL; 421 422 /* HSW/BDW FDI limited to 4k */ 423 if (adjusted_mode->crtc_hdisplay > 4096 || 424 adjusted_mode->crtc_hblank_start > 4096) 425 return -EINVAL; 426 427 pipe_config->has_pch_encoder = true; 428 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; 429 430 /* LPT FDI RX only supports 8bpc. */ 431 if (HAS_PCH_LPT(dev_priv)) { 432 if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) { 433 drm_dbg_kms(&dev_priv->drm, 434 "LPT only supports 24bpp\n"); 435 return -EINVAL; 436 } 437 438 pipe_config->pipe_bpp = 24; 439 } 440 441 /* FDI must always be 2.7 GHz */ 442 pipe_config->port_clock = 135000 * 2; 443 444 return 0; 445 } 446 447 static bool ilk_crt_detect_hotplug(struct drm_connector *connector) 448 { 449 struct drm_device *dev = connector->dev; 450 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 451 struct drm_i915_private *dev_priv = to_i915(dev); 452 u32 adpa; 453 bool ret; 454 455 /* The first time through, trigger an explicit detection cycle */ 456 if (crt->force_hotplug_required) { 457 bool turn_off_dac = HAS_PCH_SPLIT(dev_priv); 458 u32 save_adpa; 459 460 crt->force_hotplug_required = false; 461 462 save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg); 463 drm_dbg_kms(&dev_priv->drm, 464 "trigger hotplug detect cycle: adpa=0x%x\n", adpa); 465 466 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER; 467 if (turn_off_dac) 468 adpa &= ~ADPA_DAC_ENABLE; 469 470 intel_de_write(dev_priv, crt->adpa_reg, adpa); 471 472 if (intel_de_wait_for_clear(dev_priv, 473 crt->adpa_reg, 474 ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 475 1000)) 476 drm_dbg_kms(&dev_priv->drm, 477 "timed out waiting for FORCE_TRIGGER"); 478 479 if (turn_off_dac) { 480 intel_de_write(dev_priv, crt->adpa_reg, save_adpa); 481 intel_de_posting_read(dev_priv, crt->adpa_reg); 482 } 483 } 484 485 /* Check the status to see if both blue and green are on now */ 486 adpa = intel_de_read(dev_priv, crt->adpa_reg); 487 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0) 488 ret = true; 489 else 490 ret = false; 491 drm_dbg_kms(&dev_priv->drm, "ironlake hotplug adpa=0x%x, result %d\n", 492 adpa, ret); 493 494 return ret; 495 } 496 497 static bool valleyview_crt_detect_hotplug(struct drm_connector *connector) 498 { 499 struct drm_device *dev = connector->dev; 500 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 501 struct drm_i915_private *dev_priv = to_i915(dev); 502 bool reenable_hpd; 503 u32 adpa; 504 bool ret; 505 u32 save_adpa; 506 507 /* 508 * Doing a force trigger causes a hpd interrupt to get sent, which can 509 * get us stuck in a loop if we're polling: 510 * - We enable power wells and reset the ADPA 511 * - output_poll_exec does force probe on VGA, triggering a hpd 512 * - HPD handler waits for poll to unlock dev->mode_config.mutex 513 * - output_poll_exec shuts off the ADPA, unlocks 514 * dev->mode_config.mutex 515 * - HPD handler runs, resets ADPA and brings us back to the start 516 * 517 * Just disable HPD interrupts here to prevent this 518 */ 519 reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin); 520 521 save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg); 522 drm_dbg_kms(&dev_priv->drm, 523 "trigger hotplug detect cycle: adpa=0x%x\n", adpa); 524 525 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER; 526 527 intel_de_write(dev_priv, crt->adpa_reg, adpa); 528 529 if (intel_de_wait_for_clear(dev_priv, crt->adpa_reg, 530 ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 1000)) { 531 drm_dbg_kms(&dev_priv->drm, 532 "timed out waiting for FORCE_TRIGGER"); 533 intel_de_write(dev_priv, crt->adpa_reg, save_adpa); 534 } 535 536 /* Check the status to see if both blue and green are on now */ 537 adpa = intel_de_read(dev_priv, crt->adpa_reg); 538 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0) 539 ret = true; 540 else 541 ret = false; 542 543 drm_dbg_kms(&dev_priv->drm, 544 "valleyview hotplug adpa=0x%x, result %d\n", adpa, ret); 545 546 if (reenable_hpd) 547 intel_hpd_enable(dev_priv, crt->base.hpd_pin); 548 549 return ret; 550 } 551 552 static bool intel_crt_detect_hotplug(struct drm_connector *connector) 553 { 554 struct drm_device *dev = connector->dev; 555 struct drm_i915_private *dev_priv = to_i915(dev); 556 u32 stat; 557 bool ret = false; 558 int i, tries = 0; 559 560 if (HAS_PCH_SPLIT(dev_priv)) 561 return ilk_crt_detect_hotplug(connector); 562 563 if (IS_VALLEYVIEW(dev_priv)) 564 return valleyview_crt_detect_hotplug(connector); 565 566 /* 567 * On 4 series desktop, CRT detect sequence need to be done twice 568 * to get a reliable result. 569 */ 570 571 if (IS_G45(dev_priv)) 572 tries = 2; 573 else 574 tries = 1; 575 576 for (i = 0; i < tries ; i++) { 577 /* turn on the FORCE_DETECT */ 578 i915_hotplug_interrupt_update(dev_priv, 579 CRT_HOTPLUG_FORCE_DETECT, 580 CRT_HOTPLUG_FORCE_DETECT); 581 /* wait for FORCE_DETECT to go off */ 582 if (intel_de_wait_for_clear(dev_priv, PORT_HOTPLUG_EN, 583 CRT_HOTPLUG_FORCE_DETECT, 1000)) 584 drm_dbg_kms(&dev_priv->drm, 585 "timed out waiting for FORCE_DETECT to go off"); 586 } 587 588 stat = intel_de_read(dev_priv, PORT_HOTPLUG_STAT); 589 if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE) 590 ret = true; 591 592 /* clear the interrupt we just generated, if any */ 593 intel_de_write(dev_priv, PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS); 594 595 i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0); 596 597 return ret; 598 } 599 600 static struct edid *intel_crt_get_edid(struct drm_connector *connector, 601 struct i2c_adapter *i2c) 602 { 603 struct edid *edid; 604 605 edid = drm_get_edid(connector, i2c); 606 607 if (!edid && !intel_gmbus_is_forced_bit(i2c)) { 608 drm_dbg_kms(connector->dev, 609 "CRT GMBUS EDID read failed, retry using GPIO bit-banging\n"); 610 intel_gmbus_force_bit(i2c, true); 611 edid = drm_get_edid(connector, i2c); 612 intel_gmbus_force_bit(i2c, false); 613 } 614 615 return edid; 616 } 617 618 /* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */ 619 static int intel_crt_ddc_get_modes(struct drm_connector *connector, 620 struct i2c_adapter *adapter) 621 { 622 struct edid *edid; 623 int ret; 624 625 edid = intel_crt_get_edid(connector, adapter); 626 if (!edid) 627 return 0; 628 629 ret = intel_connector_update_modes(connector, edid); 630 kfree(edid); 631 632 return ret; 633 } 634 635 static bool intel_crt_detect_ddc(struct drm_connector *connector) 636 { 637 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 638 struct drm_i915_private *dev_priv = to_i915(crt->base.base.dev); 639 struct edid *edid; 640 struct i2c_adapter *i2c; 641 bool ret = false; 642 643 BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG); 644 645 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin); 646 edid = intel_crt_get_edid(connector, i2c); 647 648 if (edid) { 649 bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; 650 651 /* 652 * This may be a DVI-I connector with a shared DDC 653 * link between analog and digital outputs, so we 654 * have to check the EDID input spec of the attached device. 655 */ 656 if (!is_digital) { 657 drm_dbg_kms(&dev_priv->drm, 658 "CRT detected via DDC:0x50 [EDID]\n"); 659 ret = true; 660 } else { 661 drm_dbg_kms(&dev_priv->drm, 662 "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n"); 663 } 664 } else { 665 drm_dbg_kms(&dev_priv->drm, 666 "CRT not detected via DDC:0x50 [no valid EDID found]\n"); 667 } 668 669 kfree(edid); 670 671 return ret; 672 } 673 674 static enum drm_connector_status 675 intel_crt_load_detect(struct intel_crt *crt, u32 pipe) 676 { 677 struct drm_device *dev = crt->base.base.dev; 678 struct drm_i915_private *dev_priv = to_i915(dev); 679 struct intel_uncore *uncore = &dev_priv->uncore; 680 u32 save_bclrpat; 681 u32 save_vtotal; 682 u32 vtotal, vactive; 683 u32 vsample; 684 u32 vblank, vblank_start, vblank_end; 685 u32 dsl; 686 i915_reg_t bclrpat_reg, vtotal_reg, 687 vblank_reg, vsync_reg, pipeconf_reg, pipe_dsl_reg; 688 u8 st00; 689 enum drm_connector_status status; 690 691 drm_dbg_kms(&dev_priv->drm, "starting load-detect on CRT\n"); 692 693 bclrpat_reg = BCLRPAT(pipe); 694 vtotal_reg = VTOTAL(pipe); 695 vblank_reg = VBLANK(pipe); 696 vsync_reg = VSYNC(pipe); 697 pipeconf_reg = PIPECONF(pipe); 698 pipe_dsl_reg = PIPEDSL(pipe); 699 700 save_bclrpat = intel_uncore_read(uncore, bclrpat_reg); 701 save_vtotal = intel_uncore_read(uncore, vtotal_reg); 702 vblank = intel_uncore_read(uncore, vblank_reg); 703 704 vtotal = ((save_vtotal >> 16) & 0xfff) + 1; 705 vactive = (save_vtotal & 0x7ff) + 1; 706 707 vblank_start = (vblank & 0xfff) + 1; 708 vblank_end = ((vblank >> 16) & 0xfff) + 1; 709 710 /* Set the border color to purple. */ 711 intel_uncore_write(uncore, bclrpat_reg, 0x500050); 712 713 if (!IS_GEN(dev_priv, 2)) { 714 u32 pipeconf = intel_uncore_read(uncore, pipeconf_reg); 715 intel_uncore_write(uncore, 716 pipeconf_reg, 717 pipeconf | PIPECONF_FORCE_BORDER); 718 intel_uncore_posting_read(uncore, pipeconf_reg); 719 /* Wait for next Vblank to substitue 720 * border color for Color info */ 721 intel_wait_for_vblank(dev_priv, pipe); 722 st00 = intel_uncore_read8(uncore, _VGA_MSR_WRITE); 723 status = ((st00 & (1 << 4)) != 0) ? 724 connector_status_connected : 725 connector_status_disconnected; 726 727 intel_uncore_write(uncore, pipeconf_reg, pipeconf); 728 } else { 729 bool restore_vblank = false; 730 int count, detect; 731 732 /* 733 * If there isn't any border, add some. 734 * Yes, this will flicker 735 */ 736 if (vblank_start <= vactive && vblank_end >= vtotal) { 737 u32 vsync = intel_de_read(dev_priv, vsync_reg); 738 u32 vsync_start = (vsync & 0xffff) + 1; 739 740 vblank_start = vsync_start; 741 intel_uncore_write(uncore, 742 vblank_reg, 743 (vblank_start - 1) | 744 ((vblank_end - 1) << 16)); 745 restore_vblank = true; 746 } 747 /* sample in the vertical border, selecting the larger one */ 748 if (vblank_start - vactive >= vtotal - vblank_end) 749 vsample = (vblank_start + vactive) >> 1; 750 else 751 vsample = (vtotal + vblank_end) >> 1; 752 753 /* 754 * Wait for the border to be displayed 755 */ 756 while (intel_uncore_read(uncore, pipe_dsl_reg) >= vactive) 757 ; 758 while ((dsl = intel_uncore_read(uncore, pipe_dsl_reg)) <= 759 vsample) 760 ; 761 /* 762 * Watch ST00 for an entire scanline 763 */ 764 detect = 0; 765 count = 0; 766 do { 767 count++; 768 /* Read the ST00 VGA status register */ 769 st00 = intel_uncore_read8(uncore, _VGA_MSR_WRITE); 770 if (st00 & (1 << 4)) 771 detect++; 772 } while ((intel_uncore_read(uncore, pipe_dsl_reg) == dsl)); 773 774 /* restore vblank if necessary */ 775 if (restore_vblank) 776 intel_uncore_write(uncore, vblank_reg, vblank); 777 /* 778 * If more than 3/4 of the scanline detected a monitor, 779 * then it is assumed to be present. This works even on i830, 780 * where there isn't any way to force the border color across 781 * the screen 782 */ 783 status = detect * 4 > count * 3 ? 784 connector_status_connected : 785 connector_status_disconnected; 786 } 787 788 /* Restore previous settings */ 789 intel_uncore_write(uncore, bclrpat_reg, save_bclrpat); 790 791 return status; 792 } 793 794 static int intel_spurious_crt_detect_dmi_callback(const struct dmi_system_id *id) 795 { 796 DRM_DEBUG_DRIVER("Skipping CRT detection for %s\n", id->ident); 797 return 1; 798 } 799 800 static const struct dmi_system_id intel_spurious_crt_detect[] = { 801 { 802 .callback = intel_spurious_crt_detect_dmi_callback, 803 .ident = "ACER ZGB", 804 .matches = { 805 DMI_MATCH(DMI_SYS_VENDOR, "ACER"), 806 DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), 807 }, 808 }, 809 { 810 .callback = intel_spurious_crt_detect_dmi_callback, 811 .ident = "Intel DZ77BH-55K", 812 .matches = { 813 DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), 814 DMI_MATCH(DMI_BOARD_NAME, "DZ77BH-55K"), 815 }, 816 }, 817 { } 818 }; 819 820 static int 821 intel_crt_detect(struct drm_connector *connector, 822 struct drm_modeset_acquire_ctx *ctx, 823 bool force) 824 { 825 struct drm_i915_private *dev_priv = to_i915(connector->dev); 826 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 827 struct intel_encoder *intel_encoder = &crt->base; 828 intel_wakeref_t wakeref; 829 int status, ret; 830 struct intel_load_detect_pipe tmp; 831 832 drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s] force=%d\n", 833 connector->base.id, connector->name, 834 force); 835 836 if (i915_modparams.load_detect_test) { 837 wakeref = intel_display_power_get(dev_priv, 838 intel_encoder->power_domain); 839 goto load_detect; 840 } 841 842 /* Skip machines without VGA that falsely report hotplug events */ 843 if (dmi_check_system(intel_spurious_crt_detect)) 844 return connector_status_disconnected; 845 846 wakeref = intel_display_power_get(dev_priv, 847 intel_encoder->power_domain); 848 849 if (I915_HAS_HOTPLUG(dev_priv)) { 850 /* We can not rely on the HPD pin always being correctly wired 851 * up, for example many KVM do not pass it through, and so 852 * only trust an assertion that the monitor is connected. 853 */ 854 if (intel_crt_detect_hotplug(connector)) { 855 drm_dbg_kms(&dev_priv->drm, 856 "CRT detected via hotplug\n"); 857 status = connector_status_connected; 858 goto out; 859 } else 860 drm_dbg_kms(&dev_priv->drm, 861 "CRT not detected via hotplug\n"); 862 } 863 864 if (intel_crt_detect_ddc(connector)) { 865 status = connector_status_connected; 866 goto out; 867 } 868 869 /* Load detection is broken on HPD capable machines. Whoever wants a 870 * broken monitor (without edid) to work behind a broken kvm (that fails 871 * to have the right resistors for HP detection) needs to fix this up. 872 * For now just bail out. */ 873 if (I915_HAS_HOTPLUG(dev_priv)) { 874 status = connector_status_disconnected; 875 goto out; 876 } 877 878 load_detect: 879 if (!force) { 880 status = connector->status; 881 goto out; 882 } 883 884 /* for pre-945g platforms use load detect */ 885 ret = intel_get_load_detect_pipe(connector, &tmp, ctx); 886 if (ret > 0) { 887 if (intel_crt_detect_ddc(connector)) 888 status = connector_status_connected; 889 else if (INTEL_GEN(dev_priv) < 4) 890 status = intel_crt_load_detect(crt, 891 to_intel_crtc(connector->state->crtc)->pipe); 892 else if (i915_modparams.load_detect_test) 893 status = connector_status_disconnected; 894 else 895 status = connector_status_unknown; 896 intel_release_load_detect_pipe(connector, &tmp, ctx); 897 } else if (ret == 0) { 898 status = connector_status_unknown; 899 } else { 900 status = ret; 901 } 902 903 out: 904 intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref); 905 906 /* 907 * Make sure the refs for power wells enabled during detect are 908 * dropped to avoid a new detect cycle triggered by HPD polling. 909 */ 910 intel_display_power_flush_work(dev_priv); 911 912 return status; 913 } 914 915 static int intel_crt_get_modes(struct drm_connector *connector) 916 { 917 struct drm_device *dev = connector->dev; 918 struct drm_i915_private *dev_priv = to_i915(dev); 919 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 920 struct intel_encoder *intel_encoder = &crt->base; 921 intel_wakeref_t wakeref; 922 struct i2c_adapter *i2c; 923 int ret; 924 925 wakeref = intel_display_power_get(dev_priv, 926 intel_encoder->power_domain); 927 928 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin); 929 ret = intel_crt_ddc_get_modes(connector, i2c); 930 if (ret || !IS_G4X(dev_priv)) 931 goto out; 932 933 /* Try to probe digital port for output in DVI-I -> VGA mode. */ 934 i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB); 935 ret = intel_crt_ddc_get_modes(connector, i2c); 936 937 out: 938 intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref); 939 940 return ret; 941 } 942 943 void intel_crt_reset(struct drm_encoder *encoder) 944 { 945 struct drm_i915_private *dev_priv = to_i915(encoder->dev); 946 struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder)); 947 948 if (INTEL_GEN(dev_priv) >= 5) { 949 u32 adpa; 950 951 adpa = intel_de_read(dev_priv, crt->adpa_reg); 952 adpa &= ~ADPA_CRT_HOTPLUG_MASK; 953 adpa |= ADPA_HOTPLUG_BITS; 954 intel_de_write(dev_priv, crt->adpa_reg, adpa); 955 intel_de_posting_read(dev_priv, crt->adpa_reg); 956 957 drm_dbg_kms(&dev_priv->drm, "crt adpa set to 0x%x\n", adpa); 958 crt->force_hotplug_required = true; 959 } 960 961 } 962 963 /* 964 * Routines for controlling stuff on the analog port 965 */ 966 967 static const struct drm_connector_funcs intel_crt_connector_funcs = { 968 .fill_modes = drm_helper_probe_single_connector_modes, 969 .late_register = intel_connector_register, 970 .early_unregister = intel_connector_unregister, 971 .destroy = intel_connector_destroy, 972 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, 973 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, 974 }; 975 976 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = { 977 .detect_ctx = intel_crt_detect, 978 .mode_valid = intel_crt_mode_valid, 979 .get_modes = intel_crt_get_modes, 980 }; 981 982 static const struct drm_encoder_funcs intel_crt_enc_funcs = { 983 .reset = intel_crt_reset, 984 .destroy = intel_encoder_destroy, 985 }; 986 987 void intel_crt_init(struct drm_i915_private *dev_priv) 988 { 989 struct drm_connector *connector; 990 struct intel_crt *crt; 991 struct intel_connector *intel_connector; 992 i915_reg_t adpa_reg; 993 u32 adpa; 994 995 if (HAS_PCH_SPLIT(dev_priv)) 996 adpa_reg = PCH_ADPA; 997 else if (IS_VALLEYVIEW(dev_priv)) 998 adpa_reg = VLV_ADPA; 999 else 1000 adpa_reg = ADPA; 1001 1002 adpa = intel_de_read(dev_priv, adpa_reg); 1003 if ((adpa & ADPA_DAC_ENABLE) == 0) { 1004 /* 1005 * On some machines (some IVB at least) CRT can be 1006 * fused off, but there's no known fuse bit to 1007 * indicate that. On these machine the ADPA register 1008 * works normally, except the DAC enable bit won't 1009 * take. So the only way to tell is attempt to enable 1010 * it and see what happens. 1011 */ 1012 intel_de_write(dev_priv, adpa_reg, 1013 adpa | ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); 1014 if ((intel_de_read(dev_priv, adpa_reg) & ADPA_DAC_ENABLE) == 0) 1015 return; 1016 intel_de_write(dev_priv, adpa_reg, adpa); 1017 } 1018 1019 crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL); 1020 if (!crt) 1021 return; 1022 1023 intel_connector = intel_connector_alloc(); 1024 if (!intel_connector) { 1025 kfree(crt); 1026 return; 1027 } 1028 1029 connector = &intel_connector->base; 1030 crt->connector = intel_connector; 1031 drm_connector_init(&dev_priv->drm, &intel_connector->base, 1032 &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); 1033 1034 drm_encoder_init(&dev_priv->drm, &crt->base.base, &intel_crt_enc_funcs, 1035 DRM_MODE_ENCODER_DAC, "CRT"); 1036 1037 intel_connector_attach_encoder(intel_connector, &crt->base); 1038 1039 crt->base.type = INTEL_OUTPUT_ANALOG; 1040 crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI); 1041 if (IS_I830(dev_priv)) 1042 crt->base.pipe_mask = BIT(PIPE_A); 1043 else 1044 crt->base.pipe_mask = ~0; 1045 1046 if (IS_GEN(dev_priv, 2)) 1047 connector->interlace_allowed = 0; 1048 else 1049 connector->interlace_allowed = 1; 1050 connector->doublescan_allowed = 0; 1051 1052 crt->adpa_reg = adpa_reg; 1053 1054 crt->base.power_domain = POWER_DOMAIN_PORT_CRT; 1055 1056 if (I915_HAS_HOTPLUG(dev_priv) && 1057 !dmi_check_system(intel_spurious_crt_detect)) { 1058 crt->base.hpd_pin = HPD_CRT; 1059 crt->base.hotplug = intel_encoder_hotplug; 1060 intel_connector->polled = DRM_CONNECTOR_POLL_HPD; 1061 } else { 1062 intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT; 1063 } 1064 1065 if (HAS_DDI(dev_priv)) { 1066 crt->base.port = PORT_E; 1067 crt->base.get_config = hsw_crt_get_config; 1068 crt->base.get_hw_state = intel_ddi_get_hw_state; 1069 crt->base.compute_config = hsw_crt_compute_config; 1070 crt->base.pre_pll_enable = hsw_pre_pll_enable_crt; 1071 crt->base.pre_enable = hsw_pre_enable_crt; 1072 crt->base.enable = hsw_enable_crt; 1073 crt->base.disable = hsw_disable_crt; 1074 crt->base.post_disable = hsw_post_disable_crt; 1075 } else { 1076 if (HAS_PCH_SPLIT(dev_priv)) { 1077 crt->base.compute_config = pch_crt_compute_config; 1078 crt->base.disable = pch_disable_crt; 1079 crt->base.post_disable = pch_post_disable_crt; 1080 } else { 1081 crt->base.compute_config = intel_crt_compute_config; 1082 crt->base.disable = intel_disable_crt; 1083 } 1084 crt->base.port = PORT_NONE; 1085 crt->base.get_config = intel_crt_get_config; 1086 crt->base.get_hw_state = intel_crt_get_hw_state; 1087 crt->base.enable = intel_enable_crt; 1088 } 1089 intel_connector->get_hw_state = intel_connector_get_hw_state; 1090 1091 drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); 1092 1093 /* 1094 * TODO: find a proper way to discover whether we need to set the the 1095 * polarity and link reversal bits or not, instead of relying on the 1096 * BIOS. 1097 */ 1098 if (HAS_PCH_LPT(dev_priv)) { 1099 u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT | 1100 FDI_RX_LINK_REVERSAL_OVERRIDE; 1101 1102 dev_priv->fdi_rx_config = intel_de_read(dev_priv, 1103 FDI_RX_CTL(PIPE_A)) & fdi_config; 1104 } 1105 1106 intel_crt_reset(&crt->base.base); 1107 } 1108