1 /* 2 * Copyright © 2006-2007 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Authors: 24 * Eric Anholt <eric@anholt.net> 25 */ 26 27 #include <linux/dmi.h> 28 #include <linux/i2c.h> 29 #include <linux/slab.h> 30 31 #include <drm/drm_atomic_helper.h> 32 #include <drm/drm_crtc.h> 33 #include <drm/drm_edid.h> 34 #include <drm/drm_probe_helper.h> 35 36 #include "i915_drv.h" 37 #include "i915_irq.h" 38 #include "i915_reg.h" 39 #include "intel_connector.h" 40 #include "intel_crt.h" 41 #include "intel_crtc.h" 42 #include "intel_ddi.h" 43 #include "intel_ddi_buf_trans.h" 44 #include "intel_de.h" 45 #include "intel_display_types.h" 46 #include "intel_fdi.h" 47 #include "intel_fdi_regs.h" 48 #include "intel_fifo_underrun.h" 49 #include "intel_gmbus.h" 50 #include "intel_hotplug.h" 51 #include "intel_hotplug_irq.h" 52 #include "intel_load_detect.h" 53 #include "intel_pch_display.h" 54 #include "intel_pch_refclk.h" 55 56 /* Here's the desired hotplug mode */ 57 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \ 58 ADPA_CRT_HOTPLUG_WARMUP_10MS | \ 59 ADPA_CRT_HOTPLUG_SAMPLE_4S | \ 60 ADPA_CRT_HOTPLUG_VOLTAGE_50 | \ 61 ADPA_CRT_HOTPLUG_VOLREF_325MV | \ 62 ADPA_CRT_HOTPLUG_ENABLE) 63 64 struct intel_crt { 65 struct intel_encoder base; 66 /* DPMS state is stored in the connector, which we need in the 67 * encoder's enable/disable callbacks */ 68 struct intel_connector *connector; 69 bool force_hotplug_required; 70 i915_reg_t adpa_reg; 71 }; 72 73 static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder) 74 { 75 return container_of(encoder, struct intel_crt, base); 76 } 77 78 static struct intel_crt *intel_attached_crt(struct intel_connector *connector) 79 { 80 return intel_encoder_to_crt(intel_attached_encoder(connector)); 81 } 82 83 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv, 84 i915_reg_t adpa_reg, enum pipe *pipe) 85 { 86 u32 val; 87 88 val = intel_de_read(dev_priv, adpa_reg); 89 90 /* asserts want to know the pipe even if the port is disabled */ 91 if (HAS_PCH_CPT(dev_priv)) 92 *pipe = (val & ADPA_PIPE_SEL_MASK_CPT) >> ADPA_PIPE_SEL_SHIFT_CPT; 93 else 94 *pipe = (val & ADPA_PIPE_SEL_MASK) >> ADPA_PIPE_SEL_SHIFT; 95 96 return val & ADPA_DAC_ENABLE; 97 } 98 99 static bool intel_crt_get_hw_state(struct intel_encoder *encoder, 100 enum pipe *pipe) 101 { 102 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 103 struct intel_crt *crt = intel_encoder_to_crt(encoder); 104 intel_wakeref_t wakeref; 105 bool ret; 106 107 wakeref = intel_display_power_get_if_enabled(dev_priv, 108 encoder->power_domain); 109 if (!wakeref) 110 return false; 111 112 ret = intel_crt_port_enabled(dev_priv, crt->adpa_reg, pipe); 113 114 intel_display_power_put(dev_priv, encoder->power_domain, wakeref); 115 116 return ret; 117 } 118 119 static unsigned int intel_crt_get_flags(struct intel_encoder *encoder) 120 { 121 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 122 struct intel_crt *crt = intel_encoder_to_crt(encoder); 123 u32 tmp, flags = 0; 124 125 tmp = intel_de_read(dev_priv, crt->adpa_reg); 126 127 if (tmp & ADPA_HSYNC_ACTIVE_HIGH) 128 flags |= DRM_MODE_FLAG_PHSYNC; 129 else 130 flags |= DRM_MODE_FLAG_NHSYNC; 131 132 if (tmp & ADPA_VSYNC_ACTIVE_HIGH) 133 flags |= DRM_MODE_FLAG_PVSYNC; 134 else 135 flags |= DRM_MODE_FLAG_NVSYNC; 136 137 return flags; 138 } 139 140 static void intel_crt_get_config(struct intel_encoder *encoder, 141 struct intel_crtc_state *pipe_config) 142 { 143 pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG); 144 145 pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder); 146 147 pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock; 148 } 149 150 static void hsw_crt_get_config(struct intel_encoder *encoder, 151 struct intel_crtc_state *pipe_config) 152 { 153 lpt_pch_get_config(pipe_config); 154 155 hsw_ddi_get_config(encoder, pipe_config); 156 157 pipe_config->hw.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC | 158 DRM_MODE_FLAG_NHSYNC | 159 DRM_MODE_FLAG_PVSYNC | 160 DRM_MODE_FLAG_NVSYNC); 161 pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder); 162 } 163 164 /* Note: The caller is required to filter out dpms modes not supported by the 165 * platform. */ 166 static void intel_crt_set_dpms(struct intel_encoder *encoder, 167 const struct intel_crtc_state *crtc_state, 168 int mode) 169 { 170 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 171 struct intel_crt *crt = intel_encoder_to_crt(encoder); 172 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 173 const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; 174 u32 adpa; 175 176 if (DISPLAY_VER(dev_priv) >= 5) 177 adpa = ADPA_HOTPLUG_BITS; 178 else 179 adpa = 0; 180 181 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) 182 adpa |= ADPA_HSYNC_ACTIVE_HIGH; 183 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) 184 adpa |= ADPA_VSYNC_ACTIVE_HIGH; 185 186 /* For CPT allow 3 pipe config, for others just use A or B */ 187 if (HAS_PCH_LPT(dev_priv)) 188 ; /* Those bits don't exist here */ 189 else if (HAS_PCH_CPT(dev_priv)) 190 adpa |= ADPA_PIPE_SEL_CPT(crtc->pipe); 191 else 192 adpa |= ADPA_PIPE_SEL(crtc->pipe); 193 194 if (!HAS_PCH_SPLIT(dev_priv)) 195 intel_de_write(dev_priv, BCLRPAT(crtc->pipe), 0); 196 197 switch (mode) { 198 case DRM_MODE_DPMS_ON: 199 adpa |= ADPA_DAC_ENABLE; 200 break; 201 case DRM_MODE_DPMS_STANDBY: 202 adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; 203 break; 204 case DRM_MODE_DPMS_SUSPEND: 205 adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; 206 break; 207 case DRM_MODE_DPMS_OFF: 208 adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; 209 break; 210 } 211 212 intel_de_write(dev_priv, crt->adpa_reg, adpa); 213 } 214 215 static void intel_disable_crt(struct intel_atomic_state *state, 216 struct intel_encoder *encoder, 217 const struct intel_crtc_state *old_crtc_state, 218 const struct drm_connector_state *old_conn_state) 219 { 220 intel_crt_set_dpms(encoder, old_crtc_state, DRM_MODE_DPMS_OFF); 221 } 222 223 static void pch_disable_crt(struct intel_atomic_state *state, 224 struct intel_encoder *encoder, 225 const struct intel_crtc_state *old_crtc_state, 226 const struct drm_connector_state *old_conn_state) 227 { 228 } 229 230 static void pch_post_disable_crt(struct intel_atomic_state *state, 231 struct intel_encoder *encoder, 232 const struct intel_crtc_state *old_crtc_state, 233 const struct drm_connector_state *old_conn_state) 234 { 235 intel_disable_crt(state, encoder, old_crtc_state, old_conn_state); 236 } 237 238 static void hsw_disable_crt(struct intel_atomic_state *state, 239 struct intel_encoder *encoder, 240 const struct intel_crtc_state *old_crtc_state, 241 const struct drm_connector_state *old_conn_state) 242 { 243 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 244 245 drm_WARN_ON(&dev_priv->drm, !old_crtc_state->has_pch_encoder); 246 247 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); 248 } 249 250 static void hsw_post_disable_crt(struct intel_atomic_state *state, 251 struct intel_encoder *encoder, 252 const struct intel_crtc_state *old_crtc_state, 253 const struct drm_connector_state *old_conn_state) 254 { 255 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); 256 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 257 258 intel_crtc_vblank_off(old_crtc_state); 259 260 intel_disable_transcoder(old_crtc_state); 261 262 intel_ddi_disable_transcoder_func(old_crtc_state); 263 264 ilk_pfit_disable(old_crtc_state); 265 266 intel_ddi_disable_transcoder_clock(old_crtc_state); 267 268 pch_post_disable_crt(state, encoder, old_crtc_state, old_conn_state); 269 270 lpt_pch_disable(state, crtc); 271 272 hsw_fdi_disable(encoder); 273 274 drm_WARN_ON(&dev_priv->drm, !old_crtc_state->has_pch_encoder); 275 276 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); 277 } 278 279 static void hsw_pre_pll_enable_crt(struct intel_atomic_state *state, 280 struct intel_encoder *encoder, 281 const struct intel_crtc_state *crtc_state, 282 const struct drm_connector_state *conn_state) 283 { 284 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 285 286 drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder); 287 288 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); 289 } 290 291 static void hsw_pre_enable_crt(struct intel_atomic_state *state, 292 struct intel_encoder *encoder, 293 const struct intel_crtc_state *crtc_state, 294 const struct drm_connector_state *conn_state) 295 { 296 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 297 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 298 enum pipe pipe = crtc->pipe; 299 300 drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder); 301 302 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); 303 304 hsw_fdi_link_train(encoder, crtc_state); 305 306 intel_ddi_enable_transcoder_clock(encoder, crtc_state); 307 } 308 309 static void hsw_enable_crt(struct intel_atomic_state *state, 310 struct intel_encoder *encoder, 311 const struct intel_crtc_state *crtc_state, 312 const struct drm_connector_state *conn_state) 313 { 314 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 315 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 316 enum pipe pipe = crtc->pipe; 317 318 drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder); 319 320 intel_ddi_enable_transcoder_func(encoder, crtc_state); 321 322 intel_enable_transcoder(crtc_state); 323 324 lpt_pch_enable(state, crtc); 325 326 intel_crtc_vblank_on(crtc_state); 327 328 intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON); 329 330 intel_crtc_wait_for_next_vblank(crtc); 331 intel_crtc_wait_for_next_vblank(crtc); 332 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); 333 intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); 334 } 335 336 static void intel_enable_crt(struct intel_atomic_state *state, 337 struct intel_encoder *encoder, 338 const struct intel_crtc_state *crtc_state, 339 const struct drm_connector_state *conn_state) 340 { 341 intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON); 342 } 343 344 static enum drm_mode_status 345 intel_crt_mode_valid(struct drm_connector *connector, 346 struct drm_display_mode *mode) 347 { 348 struct drm_device *dev = connector->dev; 349 struct drm_i915_private *dev_priv = to_i915(dev); 350 int max_dotclk = dev_priv->max_dotclk_freq; 351 int max_clock; 352 353 if (mode->flags & DRM_MODE_FLAG_DBLSCAN) 354 return MODE_NO_DBLESCAN; 355 356 if (mode->clock < 25000) 357 return MODE_CLOCK_LOW; 358 359 if (HAS_PCH_LPT(dev_priv)) 360 max_clock = 180000; 361 else if (IS_VALLEYVIEW(dev_priv)) 362 /* 363 * 270 MHz due to current DPLL limits, 364 * DAC limit supposedly 355 MHz. 365 */ 366 max_clock = 270000; 367 else if (IS_DISPLAY_VER(dev_priv, 3, 4)) 368 max_clock = 400000; 369 else 370 max_clock = 350000; 371 if (mode->clock > max_clock) 372 return MODE_CLOCK_HIGH; 373 374 if (mode->clock > max_dotclk) 375 return MODE_CLOCK_HIGH; 376 377 /* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */ 378 if (HAS_PCH_LPT(dev_priv) && 379 ilk_get_lanes_required(mode->clock, 270000, 24) > 2) 380 return MODE_CLOCK_HIGH; 381 382 /* HSW/BDW FDI limited to 4k */ 383 if (mode->hdisplay > 4096) 384 return MODE_H_ILLEGAL; 385 386 return MODE_OK; 387 } 388 389 static int intel_crt_compute_config(struct intel_encoder *encoder, 390 struct intel_crtc_state *pipe_config, 391 struct drm_connector_state *conn_state) 392 { 393 struct drm_display_mode *adjusted_mode = 394 &pipe_config->hw.adjusted_mode; 395 396 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 397 return -EINVAL; 398 399 pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB; 400 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; 401 402 return 0; 403 } 404 405 static int pch_crt_compute_config(struct intel_encoder *encoder, 406 struct intel_crtc_state *pipe_config, 407 struct drm_connector_state *conn_state) 408 { 409 struct drm_display_mode *adjusted_mode = 410 &pipe_config->hw.adjusted_mode; 411 412 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 413 return -EINVAL; 414 415 pipe_config->has_pch_encoder = true; 416 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; 417 418 return 0; 419 } 420 421 static int hsw_crt_compute_config(struct intel_encoder *encoder, 422 struct intel_crtc_state *pipe_config, 423 struct drm_connector_state *conn_state) 424 { 425 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 426 struct drm_display_mode *adjusted_mode = 427 &pipe_config->hw.adjusted_mode; 428 429 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) 430 return -EINVAL; 431 432 /* HSW/BDW FDI limited to 4k */ 433 if (adjusted_mode->crtc_hdisplay > 4096 || 434 adjusted_mode->crtc_hblank_start > 4096) 435 return -EINVAL; 436 437 pipe_config->has_pch_encoder = true; 438 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; 439 440 /* LPT FDI RX only supports 8bpc. */ 441 if (HAS_PCH_LPT(dev_priv)) { 442 if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) { 443 drm_dbg_kms(&dev_priv->drm, 444 "LPT only supports 24bpp\n"); 445 return -EINVAL; 446 } 447 448 pipe_config->pipe_bpp = 24; 449 } 450 451 /* FDI must always be 2.7 GHz */ 452 pipe_config->port_clock = 135000 * 2; 453 454 adjusted_mode->crtc_clock = lpt_iclkip(pipe_config); 455 456 return 0; 457 } 458 459 static bool ilk_crt_detect_hotplug(struct drm_connector *connector) 460 { 461 struct drm_device *dev = connector->dev; 462 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 463 struct drm_i915_private *dev_priv = to_i915(dev); 464 u32 adpa; 465 bool ret; 466 467 /* The first time through, trigger an explicit detection cycle */ 468 if (crt->force_hotplug_required) { 469 bool turn_off_dac = HAS_PCH_SPLIT(dev_priv); 470 u32 save_adpa; 471 472 crt->force_hotplug_required = false; 473 474 save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg); 475 drm_dbg_kms(&dev_priv->drm, 476 "trigger hotplug detect cycle: adpa=0x%x\n", adpa); 477 478 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER; 479 if (turn_off_dac) 480 adpa &= ~ADPA_DAC_ENABLE; 481 482 intel_de_write(dev_priv, crt->adpa_reg, adpa); 483 484 if (intel_de_wait_for_clear(dev_priv, 485 crt->adpa_reg, 486 ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 487 1000)) 488 drm_dbg_kms(&dev_priv->drm, 489 "timed out waiting for FORCE_TRIGGER"); 490 491 if (turn_off_dac) { 492 intel_de_write(dev_priv, crt->adpa_reg, save_adpa); 493 intel_de_posting_read(dev_priv, crt->adpa_reg); 494 } 495 } 496 497 /* Check the status to see if both blue and green are on now */ 498 adpa = intel_de_read(dev_priv, crt->adpa_reg); 499 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0) 500 ret = true; 501 else 502 ret = false; 503 drm_dbg_kms(&dev_priv->drm, "ironlake hotplug adpa=0x%x, result %d\n", 504 adpa, ret); 505 506 return ret; 507 } 508 509 static bool valleyview_crt_detect_hotplug(struct drm_connector *connector) 510 { 511 struct drm_device *dev = connector->dev; 512 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 513 struct drm_i915_private *dev_priv = to_i915(dev); 514 bool reenable_hpd; 515 u32 adpa; 516 bool ret; 517 u32 save_adpa; 518 519 /* 520 * Doing a force trigger causes a hpd interrupt to get sent, which can 521 * get us stuck in a loop if we're polling: 522 * - We enable power wells and reset the ADPA 523 * - output_poll_exec does force probe on VGA, triggering a hpd 524 * - HPD handler waits for poll to unlock dev->mode_config.mutex 525 * - output_poll_exec shuts off the ADPA, unlocks 526 * dev->mode_config.mutex 527 * - HPD handler runs, resets ADPA and brings us back to the start 528 * 529 * Just disable HPD interrupts here to prevent this 530 */ 531 reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin); 532 533 save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg); 534 drm_dbg_kms(&dev_priv->drm, 535 "trigger hotplug detect cycle: adpa=0x%x\n", adpa); 536 537 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER; 538 539 intel_de_write(dev_priv, crt->adpa_reg, adpa); 540 541 if (intel_de_wait_for_clear(dev_priv, crt->adpa_reg, 542 ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 1000)) { 543 drm_dbg_kms(&dev_priv->drm, 544 "timed out waiting for FORCE_TRIGGER"); 545 intel_de_write(dev_priv, crt->adpa_reg, save_adpa); 546 } 547 548 /* Check the status to see if both blue and green are on now */ 549 adpa = intel_de_read(dev_priv, crt->adpa_reg); 550 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0) 551 ret = true; 552 else 553 ret = false; 554 555 drm_dbg_kms(&dev_priv->drm, 556 "valleyview hotplug adpa=0x%x, result %d\n", adpa, ret); 557 558 if (reenable_hpd) 559 intel_hpd_enable(dev_priv, crt->base.hpd_pin); 560 561 return ret; 562 } 563 564 static bool intel_crt_detect_hotplug(struct drm_connector *connector) 565 { 566 struct drm_device *dev = connector->dev; 567 struct drm_i915_private *dev_priv = to_i915(dev); 568 u32 stat; 569 bool ret = false; 570 int i, tries = 0; 571 572 if (HAS_PCH_SPLIT(dev_priv)) 573 return ilk_crt_detect_hotplug(connector); 574 575 if (IS_VALLEYVIEW(dev_priv)) 576 return valleyview_crt_detect_hotplug(connector); 577 578 /* 579 * On 4 series desktop, CRT detect sequence need to be done twice 580 * to get a reliable result. 581 */ 582 583 if (IS_G45(dev_priv)) 584 tries = 2; 585 else 586 tries = 1; 587 588 for (i = 0; i < tries ; i++) { 589 /* turn on the FORCE_DETECT */ 590 i915_hotplug_interrupt_update(dev_priv, 591 CRT_HOTPLUG_FORCE_DETECT, 592 CRT_HOTPLUG_FORCE_DETECT); 593 /* wait for FORCE_DETECT to go off */ 594 if (intel_de_wait_for_clear(dev_priv, PORT_HOTPLUG_EN, 595 CRT_HOTPLUG_FORCE_DETECT, 1000)) 596 drm_dbg_kms(&dev_priv->drm, 597 "timed out waiting for FORCE_DETECT to go off"); 598 } 599 600 stat = intel_de_read(dev_priv, PORT_HOTPLUG_STAT); 601 if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE) 602 ret = true; 603 604 /* clear the interrupt we just generated, if any */ 605 intel_de_write(dev_priv, PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS); 606 607 i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0); 608 609 return ret; 610 } 611 612 static const struct drm_edid *intel_crt_get_edid(struct drm_connector *connector, 613 struct i2c_adapter *i2c) 614 { 615 const struct drm_edid *drm_edid; 616 617 drm_edid = drm_edid_read_ddc(connector, i2c); 618 619 if (!drm_edid && !intel_gmbus_is_forced_bit(i2c)) { 620 drm_dbg_kms(connector->dev, 621 "CRT GMBUS EDID read failed, retry using GPIO bit-banging\n"); 622 intel_gmbus_force_bit(i2c, true); 623 drm_edid = drm_edid_read_ddc(connector, i2c); 624 intel_gmbus_force_bit(i2c, false); 625 } 626 627 return drm_edid; 628 } 629 630 /* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */ 631 static int intel_crt_ddc_get_modes(struct drm_connector *connector, 632 struct i2c_adapter *adapter) 633 { 634 const struct drm_edid *drm_edid; 635 int ret; 636 637 drm_edid = intel_crt_get_edid(connector, adapter); 638 if (!drm_edid) 639 return 0; 640 641 ret = intel_connector_update_modes(connector, drm_edid); 642 643 drm_edid_free(drm_edid); 644 645 return ret; 646 } 647 648 static bool intel_crt_detect_ddc(struct drm_connector *connector) 649 { 650 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 651 struct drm_i915_private *dev_priv = to_i915(crt->base.base.dev); 652 const struct drm_edid *drm_edid; 653 struct i2c_adapter *i2c; 654 bool ret = false; 655 656 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->display.vbt.crt_ddc_pin); 657 drm_edid = intel_crt_get_edid(connector, i2c); 658 659 if (drm_edid) { 660 const struct edid *edid = drm_edid_raw(drm_edid); 661 bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; 662 663 /* 664 * This may be a DVI-I connector with a shared DDC 665 * link between analog and digital outputs, so we 666 * have to check the EDID input spec of the attached device. 667 */ 668 if (!is_digital) { 669 drm_dbg_kms(&dev_priv->drm, 670 "CRT detected via DDC:0x50 [EDID]\n"); 671 ret = true; 672 } else { 673 drm_dbg_kms(&dev_priv->drm, 674 "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n"); 675 } 676 } else { 677 drm_dbg_kms(&dev_priv->drm, 678 "CRT not detected via DDC:0x50 [no valid EDID found]\n"); 679 } 680 681 drm_edid_free(drm_edid); 682 683 return ret; 684 } 685 686 static enum drm_connector_status 687 intel_crt_load_detect(struct intel_crt *crt, enum pipe pipe) 688 { 689 struct drm_device *dev = crt->base.base.dev; 690 struct drm_i915_private *dev_priv = to_i915(dev); 691 enum transcoder cpu_transcoder = (enum transcoder)pipe; 692 u32 save_bclrpat; 693 u32 save_vtotal; 694 u32 vtotal, vactive; 695 u32 vsample; 696 u32 vblank, vblank_start, vblank_end; 697 u32 dsl; 698 u8 st00; 699 enum drm_connector_status status; 700 701 drm_dbg_kms(&dev_priv->drm, "starting load-detect on CRT\n"); 702 703 save_bclrpat = intel_de_read(dev_priv, BCLRPAT(cpu_transcoder)); 704 save_vtotal = intel_de_read(dev_priv, TRANS_VTOTAL(cpu_transcoder)); 705 vblank = intel_de_read(dev_priv, TRANS_VBLANK(cpu_transcoder)); 706 707 vtotal = REG_FIELD_GET(VTOTAL_MASK, save_vtotal) + 1; 708 vactive = REG_FIELD_GET(VACTIVE_MASK, save_vtotal) + 1; 709 710 vblank_start = REG_FIELD_GET(VBLANK_START_MASK, vblank) + 1; 711 vblank_end = REG_FIELD_GET(VBLANK_END_MASK, vblank) + 1; 712 713 /* Set the border color to purple. */ 714 intel_de_write(dev_priv, BCLRPAT(cpu_transcoder), 0x500050); 715 716 if (DISPLAY_VER(dev_priv) != 2) { 717 u32 transconf = intel_de_read(dev_priv, TRANSCONF(cpu_transcoder)); 718 719 intel_de_write(dev_priv, TRANSCONF(cpu_transcoder), 720 transconf | TRANSCONF_FORCE_BORDER); 721 intel_de_posting_read(dev_priv, TRANSCONF(cpu_transcoder)); 722 /* Wait for next Vblank to substitue 723 * border color for Color info */ 724 intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe)); 725 st00 = intel_de_read8(dev_priv, _VGA_MSR_WRITE); 726 status = ((st00 & (1 << 4)) != 0) ? 727 connector_status_connected : 728 connector_status_disconnected; 729 730 intel_de_write(dev_priv, TRANSCONF(cpu_transcoder), transconf); 731 } else { 732 bool restore_vblank = false; 733 int count, detect; 734 735 /* 736 * If there isn't any border, add some. 737 * Yes, this will flicker 738 */ 739 if (vblank_start <= vactive && vblank_end >= vtotal) { 740 u32 vsync = intel_de_read(dev_priv, TRANS_VSYNC(cpu_transcoder)); 741 u32 vsync_start = REG_FIELD_GET(VSYNC_START_MASK, vsync) + 1; 742 743 vblank_start = vsync_start; 744 intel_de_write(dev_priv, TRANS_VBLANK(cpu_transcoder), 745 VBLANK_START(vblank_start - 1) | 746 VBLANK_END(vblank_end - 1)); 747 restore_vblank = true; 748 } 749 /* sample in the vertical border, selecting the larger one */ 750 if (vblank_start - vactive >= vtotal - vblank_end) 751 vsample = (vblank_start + vactive) >> 1; 752 else 753 vsample = (vtotal + vblank_end) >> 1; 754 755 /* 756 * Wait for the border to be displayed 757 */ 758 while (intel_de_read(dev_priv, PIPEDSL(pipe)) >= vactive) 759 ; 760 while ((dsl = intel_de_read(dev_priv, PIPEDSL(pipe))) <= vsample) 761 ; 762 /* 763 * Watch ST00 for an entire scanline 764 */ 765 detect = 0; 766 count = 0; 767 do { 768 count++; 769 /* Read the ST00 VGA status register */ 770 st00 = intel_de_read8(dev_priv, _VGA_MSR_WRITE); 771 if (st00 & (1 << 4)) 772 detect++; 773 } while ((intel_de_read(dev_priv, PIPEDSL(pipe)) == dsl)); 774 775 /* restore vblank if necessary */ 776 if (restore_vblank) 777 intel_de_write(dev_priv, TRANS_VBLANK(cpu_transcoder), vblank); 778 /* 779 * If more than 3/4 of the scanline detected a monitor, 780 * then it is assumed to be present. This works even on i830, 781 * where there isn't any way to force the border color across 782 * the screen 783 */ 784 status = detect * 4 > count * 3 ? 785 connector_status_connected : 786 connector_status_disconnected; 787 } 788 789 /* Restore previous settings */ 790 intel_de_write(dev_priv, BCLRPAT(cpu_transcoder), save_bclrpat); 791 792 return status; 793 } 794 795 static int intel_spurious_crt_detect_dmi_callback(const struct dmi_system_id *id) 796 { 797 DRM_DEBUG_DRIVER("Skipping CRT detection for %s\n", id->ident); 798 return 1; 799 } 800 801 static const struct dmi_system_id intel_spurious_crt_detect[] = { 802 { 803 .callback = intel_spurious_crt_detect_dmi_callback, 804 .ident = "ACER ZGB", 805 .matches = { 806 DMI_MATCH(DMI_SYS_VENDOR, "ACER"), 807 DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), 808 }, 809 }, 810 { 811 .callback = intel_spurious_crt_detect_dmi_callback, 812 .ident = "Intel DZ77BH-55K", 813 .matches = { 814 DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), 815 DMI_MATCH(DMI_BOARD_NAME, "DZ77BH-55K"), 816 }, 817 }, 818 { } 819 }; 820 821 static int 822 intel_crt_detect(struct drm_connector *connector, 823 struct drm_modeset_acquire_ctx *ctx, 824 bool force) 825 { 826 struct drm_i915_private *dev_priv = to_i915(connector->dev); 827 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 828 struct intel_encoder *intel_encoder = &crt->base; 829 struct drm_atomic_state *state; 830 intel_wakeref_t wakeref; 831 int status; 832 833 drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s] force=%d\n", 834 connector->base.id, connector->name, 835 force); 836 837 if (!INTEL_DISPLAY_ENABLED(dev_priv)) 838 return connector_status_disconnected; 839 840 if (dev_priv->params.load_detect_test) { 841 wakeref = intel_display_power_get(dev_priv, 842 intel_encoder->power_domain); 843 goto load_detect; 844 } 845 846 /* Skip machines without VGA that falsely report hotplug events */ 847 if (dmi_check_system(intel_spurious_crt_detect)) 848 return connector_status_disconnected; 849 850 wakeref = intel_display_power_get(dev_priv, 851 intel_encoder->power_domain); 852 853 if (I915_HAS_HOTPLUG(dev_priv)) { 854 /* We can not rely on the HPD pin always being correctly wired 855 * up, for example many KVM do not pass it through, and so 856 * only trust an assertion that the monitor is connected. 857 */ 858 if (intel_crt_detect_hotplug(connector)) { 859 drm_dbg_kms(&dev_priv->drm, 860 "CRT detected via hotplug\n"); 861 status = connector_status_connected; 862 goto out; 863 } else 864 drm_dbg_kms(&dev_priv->drm, 865 "CRT not detected via hotplug\n"); 866 } 867 868 if (intel_crt_detect_ddc(connector)) { 869 status = connector_status_connected; 870 goto out; 871 } 872 873 /* Load detection is broken on HPD capable machines. Whoever wants a 874 * broken monitor (without edid) to work behind a broken kvm (that fails 875 * to have the right resistors for HP detection) needs to fix this up. 876 * For now just bail out. */ 877 if (I915_HAS_HOTPLUG(dev_priv)) { 878 status = connector_status_disconnected; 879 goto out; 880 } 881 882 load_detect: 883 if (!force) { 884 status = connector->status; 885 goto out; 886 } 887 888 /* for pre-945g platforms use load detect */ 889 state = intel_load_detect_get_pipe(connector, ctx); 890 if (IS_ERR(state)) { 891 status = PTR_ERR(state); 892 } else if (!state) { 893 status = connector_status_unknown; 894 } else { 895 if (intel_crt_detect_ddc(connector)) 896 status = connector_status_connected; 897 else if (DISPLAY_VER(dev_priv) < 4) 898 status = intel_crt_load_detect(crt, 899 to_intel_crtc(connector->state->crtc)->pipe); 900 else if (dev_priv->params.load_detect_test) 901 status = connector_status_disconnected; 902 else 903 status = connector_status_unknown; 904 intel_load_detect_release_pipe(connector, state, ctx); 905 } 906 907 out: 908 intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref); 909 910 /* 911 * Make sure the refs for power wells enabled during detect are 912 * dropped to avoid a new detect cycle triggered by HPD polling. 913 */ 914 intel_display_power_flush_work(dev_priv); 915 916 return status; 917 } 918 919 static int intel_crt_get_modes(struct drm_connector *connector) 920 { 921 struct drm_device *dev = connector->dev; 922 struct drm_i915_private *dev_priv = to_i915(dev); 923 struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector)); 924 struct intel_encoder *intel_encoder = &crt->base; 925 intel_wakeref_t wakeref; 926 struct i2c_adapter *i2c; 927 int ret; 928 929 wakeref = intel_display_power_get(dev_priv, 930 intel_encoder->power_domain); 931 932 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->display.vbt.crt_ddc_pin); 933 ret = intel_crt_ddc_get_modes(connector, i2c); 934 if (ret || !IS_G4X(dev_priv)) 935 goto out; 936 937 /* Try to probe digital port for output in DVI-I -> VGA mode. */ 938 i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB); 939 ret = intel_crt_ddc_get_modes(connector, i2c); 940 941 out: 942 intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref); 943 944 return ret; 945 } 946 947 void intel_crt_reset(struct drm_encoder *encoder) 948 { 949 struct drm_i915_private *dev_priv = to_i915(encoder->dev); 950 struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder)); 951 952 if (DISPLAY_VER(dev_priv) >= 5) { 953 u32 adpa; 954 955 adpa = intel_de_read(dev_priv, crt->adpa_reg); 956 adpa &= ~ADPA_CRT_HOTPLUG_MASK; 957 adpa |= ADPA_HOTPLUG_BITS; 958 intel_de_write(dev_priv, crt->adpa_reg, adpa); 959 intel_de_posting_read(dev_priv, crt->adpa_reg); 960 961 drm_dbg_kms(&dev_priv->drm, "crt adpa set to 0x%x\n", adpa); 962 crt->force_hotplug_required = true; 963 } 964 965 } 966 967 /* 968 * Routines for controlling stuff on the analog port 969 */ 970 971 static const struct drm_connector_funcs intel_crt_connector_funcs = { 972 .fill_modes = drm_helper_probe_single_connector_modes, 973 .late_register = intel_connector_register, 974 .early_unregister = intel_connector_unregister, 975 .destroy = intel_connector_destroy, 976 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, 977 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, 978 }; 979 980 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = { 981 .detect_ctx = intel_crt_detect, 982 .mode_valid = intel_crt_mode_valid, 983 .get_modes = intel_crt_get_modes, 984 }; 985 986 static const struct drm_encoder_funcs intel_crt_enc_funcs = { 987 .reset = intel_crt_reset, 988 .destroy = intel_encoder_destroy, 989 }; 990 991 void intel_crt_init(struct drm_i915_private *dev_priv) 992 { 993 struct drm_connector *connector; 994 struct intel_crt *crt; 995 struct intel_connector *intel_connector; 996 i915_reg_t adpa_reg; 997 u32 adpa; 998 999 if (HAS_PCH_SPLIT(dev_priv)) 1000 adpa_reg = PCH_ADPA; 1001 else if (IS_VALLEYVIEW(dev_priv)) 1002 adpa_reg = VLV_ADPA; 1003 else 1004 adpa_reg = ADPA; 1005 1006 adpa = intel_de_read(dev_priv, adpa_reg); 1007 if ((adpa & ADPA_DAC_ENABLE) == 0) { 1008 /* 1009 * On some machines (some IVB at least) CRT can be 1010 * fused off, but there's no known fuse bit to 1011 * indicate that. On these machine the ADPA register 1012 * works normally, except the DAC enable bit won't 1013 * take. So the only way to tell is attempt to enable 1014 * it and see what happens. 1015 */ 1016 intel_de_write(dev_priv, adpa_reg, 1017 adpa | ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); 1018 if ((intel_de_read(dev_priv, adpa_reg) & ADPA_DAC_ENABLE) == 0) 1019 return; 1020 intel_de_write(dev_priv, adpa_reg, adpa); 1021 } 1022 1023 crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL); 1024 if (!crt) 1025 return; 1026 1027 intel_connector = intel_connector_alloc(); 1028 if (!intel_connector) { 1029 kfree(crt); 1030 return; 1031 } 1032 1033 connector = &intel_connector->base; 1034 crt->connector = intel_connector; 1035 drm_connector_init(&dev_priv->drm, &intel_connector->base, 1036 &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); 1037 1038 drm_encoder_init(&dev_priv->drm, &crt->base.base, &intel_crt_enc_funcs, 1039 DRM_MODE_ENCODER_DAC, "CRT"); 1040 1041 intel_connector_attach_encoder(intel_connector, &crt->base); 1042 1043 crt->base.type = INTEL_OUTPUT_ANALOG; 1044 crt->base.cloneable = BIT(INTEL_OUTPUT_DVO) | BIT(INTEL_OUTPUT_HDMI); 1045 if (IS_I830(dev_priv)) 1046 crt->base.pipe_mask = BIT(PIPE_A); 1047 else 1048 crt->base.pipe_mask = ~0; 1049 1050 if (DISPLAY_VER(dev_priv) != 2) 1051 connector->interlace_allowed = true; 1052 1053 crt->adpa_reg = adpa_reg; 1054 1055 crt->base.power_domain = POWER_DOMAIN_PORT_CRT; 1056 1057 if (I915_HAS_HOTPLUG(dev_priv) && 1058 !dmi_check_system(intel_spurious_crt_detect)) { 1059 crt->base.hpd_pin = HPD_CRT; 1060 crt->base.hotplug = intel_encoder_hotplug; 1061 intel_connector->polled = DRM_CONNECTOR_POLL_HPD; 1062 } else { 1063 intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT; 1064 } 1065 1066 if (HAS_DDI(dev_priv)) { 1067 crt->base.port = PORT_E; 1068 crt->base.get_config = hsw_crt_get_config; 1069 crt->base.get_hw_state = intel_ddi_get_hw_state; 1070 crt->base.compute_config = hsw_crt_compute_config; 1071 crt->base.pre_pll_enable = hsw_pre_pll_enable_crt; 1072 crt->base.pre_enable = hsw_pre_enable_crt; 1073 crt->base.enable = hsw_enable_crt; 1074 crt->base.disable = hsw_disable_crt; 1075 crt->base.post_disable = hsw_post_disable_crt; 1076 crt->base.enable_clock = hsw_ddi_enable_clock; 1077 crt->base.disable_clock = hsw_ddi_disable_clock; 1078 crt->base.is_clock_enabled = hsw_ddi_is_clock_enabled; 1079 1080 intel_ddi_buf_trans_init(&crt->base); 1081 } else { 1082 if (HAS_PCH_SPLIT(dev_priv)) { 1083 crt->base.compute_config = pch_crt_compute_config; 1084 crt->base.disable = pch_disable_crt; 1085 crt->base.post_disable = pch_post_disable_crt; 1086 } else { 1087 crt->base.compute_config = intel_crt_compute_config; 1088 crt->base.disable = intel_disable_crt; 1089 } 1090 crt->base.port = PORT_NONE; 1091 crt->base.get_config = intel_crt_get_config; 1092 crt->base.get_hw_state = intel_crt_get_hw_state; 1093 crt->base.enable = intel_enable_crt; 1094 } 1095 intel_connector->get_hw_state = intel_connector_get_hw_state; 1096 1097 drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); 1098 1099 /* 1100 * TODO: find a proper way to discover whether we need to set the the 1101 * polarity and link reversal bits or not, instead of relying on the 1102 * BIOS. 1103 */ 1104 if (HAS_PCH_LPT(dev_priv)) { 1105 u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT | 1106 FDI_RX_LINK_REVERSAL_OVERRIDE; 1107 1108 dev_priv->display.fdi.rx_config = intel_de_read(dev_priv, 1109 FDI_RX_CTL(PIPE_A)) & fdi_config; 1110 } 1111 1112 intel_crt_reset(&crt->base.base); 1113 } 1114