1 /* 2 * Copyright © 2006-2017 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 */ 23 24 #include <linux/time.h> 25 26 #include "hsw_ips.h" 27 #include "intel_atomic.h" 28 #include "intel_atomic_plane.h" 29 #include "intel_audio.h" 30 #include "intel_bw.h" 31 #include "intel_cdclk.h" 32 #include "intel_crtc.h" 33 #include "intel_de.h" 34 #include "intel_display_types.h" 35 #include "intel_mchbar_regs.h" 36 #include "intel_pci_config.h" 37 #include "intel_pcode.h" 38 #include "intel_psr.h" 39 #include "vlv_sideband.h" 40 41 /** 42 * DOC: CDCLK / RAWCLK 43 * 44 * The display engine uses several different clocks to do its work. There 45 * are two main clocks involved that aren't directly related to the actual 46 * pixel clock or any symbol/bit clock of the actual output port. These 47 * are the core display clock (CDCLK) and RAWCLK. 48 * 49 * CDCLK clocks most of the display pipe logic, and thus its frequency 50 * must be high enough to support the rate at which pixels are flowing 51 * through the pipes. Downscaling must also be accounted as that increases 52 * the effective pixel rate. 53 * 54 * On several platforms the CDCLK frequency can be changed dynamically 55 * to minimize power consumption for a given display configuration. 56 * Typically changes to the CDCLK frequency require all the display pipes 57 * to be shut down while the frequency is being changed. 58 * 59 * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit. 60 * DMC will not change the active CDCLK frequency however, so that part 61 * will still be performed by the driver directly. 62 * 63 * RAWCLK is a fixed frequency clock, often used by various auxiliary 64 * blocks such as AUX CH or backlight PWM. Hence the only thing we 65 * really need to know about RAWCLK is its frequency so that various 66 * dividers can be programmed correctly. 67 */ 68 69 struct intel_cdclk_funcs { 70 void (*get_cdclk)(struct drm_i915_private *i915, 71 struct intel_cdclk_config *cdclk_config); 72 void (*set_cdclk)(struct drm_i915_private *i915, 73 const struct intel_cdclk_config *cdclk_config, 74 enum pipe pipe); 75 int (*modeset_calc_cdclk)(struct intel_cdclk_state *state); 76 u8 (*calc_voltage_level)(int cdclk); 77 }; 78 79 void intel_cdclk_get_cdclk(struct drm_i915_private *dev_priv, 80 struct intel_cdclk_config *cdclk_config) 81 { 82 dev_priv->cdclk_funcs->get_cdclk(dev_priv, cdclk_config); 83 } 84 85 static void intel_cdclk_set_cdclk(struct drm_i915_private *dev_priv, 86 const struct intel_cdclk_config *cdclk_config, 87 enum pipe pipe) 88 { 89 dev_priv->cdclk_funcs->set_cdclk(dev_priv, cdclk_config, pipe); 90 } 91 92 static int intel_cdclk_modeset_calc_cdclk(struct drm_i915_private *dev_priv, 93 struct intel_cdclk_state *cdclk_config) 94 { 95 return dev_priv->cdclk_funcs->modeset_calc_cdclk(cdclk_config); 96 } 97 98 static u8 intel_cdclk_calc_voltage_level(struct drm_i915_private *dev_priv, 99 int cdclk) 100 { 101 return dev_priv->cdclk_funcs->calc_voltage_level(cdclk); 102 } 103 104 static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv, 105 struct intel_cdclk_config *cdclk_config) 106 { 107 cdclk_config->cdclk = 133333; 108 } 109 110 static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv, 111 struct intel_cdclk_config *cdclk_config) 112 { 113 cdclk_config->cdclk = 200000; 114 } 115 116 static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv, 117 struct intel_cdclk_config *cdclk_config) 118 { 119 cdclk_config->cdclk = 266667; 120 } 121 122 static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv, 123 struct intel_cdclk_config *cdclk_config) 124 { 125 cdclk_config->cdclk = 333333; 126 } 127 128 static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv, 129 struct intel_cdclk_config *cdclk_config) 130 { 131 cdclk_config->cdclk = 400000; 132 } 133 134 static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv, 135 struct intel_cdclk_config *cdclk_config) 136 { 137 cdclk_config->cdclk = 450000; 138 } 139 140 static void i85x_get_cdclk(struct drm_i915_private *dev_priv, 141 struct intel_cdclk_config *cdclk_config) 142 { 143 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); 144 u16 hpllcc = 0; 145 146 /* 147 * 852GM/852GMV only supports 133 MHz and the HPLLCC 148 * encoding is different :( 149 * FIXME is this the right way to detect 852GM/852GMV? 150 */ 151 if (pdev->revision == 0x1) { 152 cdclk_config->cdclk = 133333; 153 return; 154 } 155 156 pci_bus_read_config_word(pdev->bus, 157 PCI_DEVFN(0, 3), HPLLCC, &hpllcc); 158 159 /* Assume that the hardware is in the high speed state. This 160 * should be the default. 161 */ 162 switch (hpllcc & GC_CLOCK_CONTROL_MASK) { 163 case GC_CLOCK_133_200: 164 case GC_CLOCK_133_200_2: 165 case GC_CLOCK_100_200: 166 cdclk_config->cdclk = 200000; 167 break; 168 case GC_CLOCK_166_250: 169 cdclk_config->cdclk = 250000; 170 break; 171 case GC_CLOCK_100_133: 172 cdclk_config->cdclk = 133333; 173 break; 174 case GC_CLOCK_133_266: 175 case GC_CLOCK_133_266_2: 176 case GC_CLOCK_166_266: 177 cdclk_config->cdclk = 266667; 178 break; 179 } 180 } 181 182 static void i915gm_get_cdclk(struct drm_i915_private *dev_priv, 183 struct intel_cdclk_config *cdclk_config) 184 { 185 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); 186 u16 gcfgc = 0; 187 188 pci_read_config_word(pdev, GCFGC, &gcfgc); 189 190 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) { 191 cdclk_config->cdclk = 133333; 192 return; 193 } 194 195 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { 196 case GC_DISPLAY_CLOCK_333_320_MHZ: 197 cdclk_config->cdclk = 333333; 198 break; 199 default: 200 case GC_DISPLAY_CLOCK_190_200_MHZ: 201 cdclk_config->cdclk = 190000; 202 break; 203 } 204 } 205 206 static void i945gm_get_cdclk(struct drm_i915_private *dev_priv, 207 struct intel_cdclk_config *cdclk_config) 208 { 209 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); 210 u16 gcfgc = 0; 211 212 pci_read_config_word(pdev, GCFGC, &gcfgc); 213 214 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) { 215 cdclk_config->cdclk = 133333; 216 return; 217 } 218 219 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { 220 case GC_DISPLAY_CLOCK_333_320_MHZ: 221 cdclk_config->cdclk = 320000; 222 break; 223 default: 224 case GC_DISPLAY_CLOCK_190_200_MHZ: 225 cdclk_config->cdclk = 200000; 226 break; 227 } 228 } 229 230 static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv) 231 { 232 static const unsigned int blb_vco[8] = { 233 [0] = 3200000, 234 [1] = 4000000, 235 [2] = 5333333, 236 [3] = 4800000, 237 [4] = 6400000, 238 }; 239 static const unsigned int pnv_vco[8] = { 240 [0] = 3200000, 241 [1] = 4000000, 242 [2] = 5333333, 243 [3] = 4800000, 244 [4] = 2666667, 245 }; 246 static const unsigned int cl_vco[8] = { 247 [0] = 3200000, 248 [1] = 4000000, 249 [2] = 5333333, 250 [3] = 6400000, 251 [4] = 3333333, 252 [5] = 3566667, 253 [6] = 4266667, 254 }; 255 static const unsigned int elk_vco[8] = { 256 [0] = 3200000, 257 [1] = 4000000, 258 [2] = 5333333, 259 [3] = 4800000, 260 }; 261 static const unsigned int ctg_vco[8] = { 262 [0] = 3200000, 263 [1] = 4000000, 264 [2] = 5333333, 265 [3] = 6400000, 266 [4] = 2666667, 267 [5] = 4266667, 268 }; 269 const unsigned int *vco_table; 270 unsigned int vco; 271 u8 tmp = 0; 272 273 /* FIXME other chipsets? */ 274 if (IS_GM45(dev_priv)) 275 vco_table = ctg_vco; 276 else if (IS_G45(dev_priv)) 277 vco_table = elk_vco; 278 else if (IS_I965GM(dev_priv)) 279 vco_table = cl_vco; 280 else if (IS_PINEVIEW(dev_priv)) 281 vco_table = pnv_vco; 282 else if (IS_G33(dev_priv)) 283 vco_table = blb_vco; 284 else 285 return 0; 286 287 tmp = intel_de_read(dev_priv, 288 IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO); 289 290 vco = vco_table[tmp & 0x7]; 291 if (vco == 0) 292 drm_err(&dev_priv->drm, "Bad HPLL VCO (HPLLVCO=0x%02x)\n", 293 tmp); 294 else 295 drm_dbg_kms(&dev_priv->drm, "HPLL VCO %u kHz\n", vco); 296 297 return vco; 298 } 299 300 static void g33_get_cdclk(struct drm_i915_private *dev_priv, 301 struct intel_cdclk_config *cdclk_config) 302 { 303 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); 304 static const u8 div_3200[] = { 12, 10, 8, 7, 5, 16 }; 305 static const u8 div_4000[] = { 14, 12, 10, 8, 6, 20 }; 306 static const u8 div_4800[] = { 20, 14, 12, 10, 8, 24 }; 307 static const u8 div_5333[] = { 20, 16, 12, 12, 8, 28 }; 308 const u8 *div_table; 309 unsigned int cdclk_sel; 310 u16 tmp = 0; 311 312 cdclk_config->vco = intel_hpll_vco(dev_priv); 313 314 pci_read_config_word(pdev, GCFGC, &tmp); 315 316 cdclk_sel = (tmp >> 4) & 0x7; 317 318 if (cdclk_sel >= ARRAY_SIZE(div_3200)) 319 goto fail; 320 321 switch (cdclk_config->vco) { 322 case 3200000: 323 div_table = div_3200; 324 break; 325 case 4000000: 326 div_table = div_4000; 327 break; 328 case 4800000: 329 div_table = div_4800; 330 break; 331 case 5333333: 332 div_table = div_5333; 333 break; 334 default: 335 goto fail; 336 } 337 338 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, 339 div_table[cdclk_sel]); 340 return; 341 342 fail: 343 drm_err(&dev_priv->drm, 344 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", 345 cdclk_config->vco, tmp); 346 cdclk_config->cdclk = 190476; 347 } 348 349 static void pnv_get_cdclk(struct drm_i915_private *dev_priv, 350 struct intel_cdclk_config *cdclk_config) 351 { 352 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); 353 u16 gcfgc = 0; 354 355 pci_read_config_word(pdev, GCFGC, &gcfgc); 356 357 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { 358 case GC_DISPLAY_CLOCK_267_MHZ_PNV: 359 cdclk_config->cdclk = 266667; 360 break; 361 case GC_DISPLAY_CLOCK_333_MHZ_PNV: 362 cdclk_config->cdclk = 333333; 363 break; 364 case GC_DISPLAY_CLOCK_444_MHZ_PNV: 365 cdclk_config->cdclk = 444444; 366 break; 367 case GC_DISPLAY_CLOCK_200_MHZ_PNV: 368 cdclk_config->cdclk = 200000; 369 break; 370 default: 371 drm_err(&dev_priv->drm, 372 "Unknown pnv display core clock 0x%04x\n", gcfgc); 373 fallthrough; 374 case GC_DISPLAY_CLOCK_133_MHZ_PNV: 375 cdclk_config->cdclk = 133333; 376 break; 377 case GC_DISPLAY_CLOCK_167_MHZ_PNV: 378 cdclk_config->cdclk = 166667; 379 break; 380 } 381 } 382 383 static void i965gm_get_cdclk(struct drm_i915_private *dev_priv, 384 struct intel_cdclk_config *cdclk_config) 385 { 386 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); 387 static const u8 div_3200[] = { 16, 10, 8 }; 388 static const u8 div_4000[] = { 20, 12, 10 }; 389 static const u8 div_5333[] = { 24, 16, 14 }; 390 const u8 *div_table; 391 unsigned int cdclk_sel; 392 u16 tmp = 0; 393 394 cdclk_config->vco = intel_hpll_vco(dev_priv); 395 396 pci_read_config_word(pdev, GCFGC, &tmp); 397 398 cdclk_sel = ((tmp >> 8) & 0x1f) - 1; 399 400 if (cdclk_sel >= ARRAY_SIZE(div_3200)) 401 goto fail; 402 403 switch (cdclk_config->vco) { 404 case 3200000: 405 div_table = div_3200; 406 break; 407 case 4000000: 408 div_table = div_4000; 409 break; 410 case 5333333: 411 div_table = div_5333; 412 break; 413 default: 414 goto fail; 415 } 416 417 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, 418 div_table[cdclk_sel]); 419 return; 420 421 fail: 422 drm_err(&dev_priv->drm, 423 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", 424 cdclk_config->vco, tmp); 425 cdclk_config->cdclk = 200000; 426 } 427 428 static void gm45_get_cdclk(struct drm_i915_private *dev_priv, 429 struct intel_cdclk_config *cdclk_config) 430 { 431 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); 432 unsigned int cdclk_sel; 433 u16 tmp = 0; 434 435 cdclk_config->vco = intel_hpll_vco(dev_priv); 436 437 pci_read_config_word(pdev, GCFGC, &tmp); 438 439 cdclk_sel = (tmp >> 12) & 0x1; 440 441 switch (cdclk_config->vco) { 442 case 2666667: 443 case 4000000: 444 case 5333333: 445 cdclk_config->cdclk = cdclk_sel ? 333333 : 222222; 446 break; 447 case 3200000: 448 cdclk_config->cdclk = cdclk_sel ? 320000 : 228571; 449 break; 450 default: 451 drm_err(&dev_priv->drm, 452 "Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", 453 cdclk_config->vco, tmp); 454 cdclk_config->cdclk = 222222; 455 break; 456 } 457 } 458 459 static void hsw_get_cdclk(struct drm_i915_private *dev_priv, 460 struct intel_cdclk_config *cdclk_config) 461 { 462 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL); 463 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK; 464 465 if (lcpll & LCPLL_CD_SOURCE_FCLK) 466 cdclk_config->cdclk = 800000; 467 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT) 468 cdclk_config->cdclk = 450000; 469 else if (freq == LCPLL_CLK_FREQ_450) 470 cdclk_config->cdclk = 450000; 471 else if (IS_HSW_ULT(dev_priv)) 472 cdclk_config->cdclk = 337500; 473 else 474 cdclk_config->cdclk = 540000; 475 } 476 477 static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk) 478 { 479 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 480 333333 : 320000; 481 482 /* 483 * We seem to get an unstable or solid color picture at 200MHz. 484 * Not sure what's wrong. For now use 200MHz only when all pipes 485 * are off. 486 */ 487 if (IS_VALLEYVIEW(dev_priv) && min_cdclk > freq_320) 488 return 400000; 489 else if (min_cdclk > 266667) 490 return freq_320; 491 else if (min_cdclk > 0) 492 return 266667; 493 else 494 return 200000; 495 } 496 497 static u8 vlv_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk) 498 { 499 if (IS_VALLEYVIEW(dev_priv)) { 500 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */ 501 return 2; 502 else if (cdclk >= 266667) 503 return 1; 504 else 505 return 0; 506 } else { 507 /* 508 * Specs are full of misinformation, but testing on actual 509 * hardware has shown that we just need to write the desired 510 * CCK divider into the Punit register. 511 */ 512 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; 513 } 514 } 515 516 static void vlv_get_cdclk(struct drm_i915_private *dev_priv, 517 struct intel_cdclk_config *cdclk_config) 518 { 519 u32 val; 520 521 vlv_iosf_sb_get(dev_priv, 522 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT)); 523 524 cdclk_config->vco = vlv_get_hpll_vco(dev_priv); 525 cdclk_config->cdclk = vlv_get_cck_clock(dev_priv, "cdclk", 526 CCK_DISPLAY_CLOCK_CONTROL, 527 cdclk_config->vco); 528 529 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); 530 531 vlv_iosf_sb_put(dev_priv, 532 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT)); 533 534 if (IS_VALLEYVIEW(dev_priv)) 535 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK) >> 536 DSPFREQGUAR_SHIFT; 537 else 538 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK_CHV) >> 539 DSPFREQGUAR_SHIFT_CHV; 540 } 541 542 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv) 543 { 544 unsigned int credits, default_credits; 545 546 if (IS_CHERRYVIEW(dev_priv)) 547 default_credits = PFI_CREDIT(12); 548 else 549 default_credits = PFI_CREDIT(8); 550 551 if (dev_priv->cdclk.hw.cdclk >= dev_priv->czclk_freq) { 552 /* CHV suggested value is 31 or 63 */ 553 if (IS_CHERRYVIEW(dev_priv)) 554 credits = PFI_CREDIT_63; 555 else 556 credits = PFI_CREDIT(15); 557 } else { 558 credits = default_credits; 559 } 560 561 /* 562 * WA - write default credits before re-programming 563 * FIXME: should we also set the resend bit here? 564 */ 565 intel_de_write(dev_priv, GCI_CONTROL, 566 VGA_FAST_MODE_DISABLE | default_credits); 567 568 intel_de_write(dev_priv, GCI_CONTROL, 569 VGA_FAST_MODE_DISABLE | credits | PFI_CREDIT_RESEND); 570 571 /* 572 * FIXME is this guaranteed to clear 573 * immediately or should we poll for it? 574 */ 575 drm_WARN_ON(&dev_priv->drm, 576 intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND); 577 } 578 579 static void vlv_set_cdclk(struct drm_i915_private *dev_priv, 580 const struct intel_cdclk_config *cdclk_config, 581 enum pipe pipe) 582 { 583 int cdclk = cdclk_config->cdclk; 584 u32 val, cmd = cdclk_config->voltage_level; 585 intel_wakeref_t wakeref; 586 587 switch (cdclk) { 588 case 400000: 589 case 333333: 590 case 320000: 591 case 266667: 592 case 200000: 593 break; 594 default: 595 MISSING_CASE(cdclk); 596 return; 597 } 598 599 /* There are cases where we can end up here with power domains 600 * off and a CDCLK frequency other than the minimum, like when 601 * issuing a modeset without actually changing any display after 602 * a system suspend. So grab the display core domain, which covers 603 * the HW blocks needed for the following programming. 604 */ 605 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE); 606 607 vlv_iosf_sb_get(dev_priv, 608 BIT(VLV_IOSF_SB_CCK) | 609 BIT(VLV_IOSF_SB_BUNIT) | 610 BIT(VLV_IOSF_SB_PUNIT)); 611 612 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); 613 val &= ~DSPFREQGUAR_MASK; 614 val |= (cmd << DSPFREQGUAR_SHIFT); 615 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val); 616 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & 617 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), 618 50)) { 619 drm_err(&dev_priv->drm, 620 "timed out waiting for CDclk change\n"); 621 } 622 623 if (cdclk == 400000) { 624 u32 divider; 625 626 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, 627 cdclk) - 1; 628 629 /* adjust cdclk divider */ 630 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); 631 val &= ~CCK_FREQUENCY_VALUES; 632 val |= divider; 633 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); 634 635 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) & 636 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT), 637 50)) 638 drm_err(&dev_priv->drm, 639 "timed out waiting for CDclk change\n"); 640 } 641 642 /* adjust self-refresh exit latency value */ 643 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); 644 val &= ~0x7f; 645 646 /* 647 * For high bandwidth configs, we set a higher latency in the bunit 648 * so that the core display fetch happens in time to avoid underruns. 649 */ 650 if (cdclk == 400000) 651 val |= 4500 / 250; /* 4.5 usec */ 652 else 653 val |= 3000 / 250; /* 3.0 usec */ 654 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); 655 656 vlv_iosf_sb_put(dev_priv, 657 BIT(VLV_IOSF_SB_CCK) | 658 BIT(VLV_IOSF_SB_BUNIT) | 659 BIT(VLV_IOSF_SB_PUNIT)); 660 661 intel_update_cdclk(dev_priv); 662 663 vlv_program_pfi_credits(dev_priv); 664 665 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref); 666 } 667 668 static void chv_set_cdclk(struct drm_i915_private *dev_priv, 669 const struct intel_cdclk_config *cdclk_config, 670 enum pipe pipe) 671 { 672 int cdclk = cdclk_config->cdclk; 673 u32 val, cmd = cdclk_config->voltage_level; 674 intel_wakeref_t wakeref; 675 676 switch (cdclk) { 677 case 333333: 678 case 320000: 679 case 266667: 680 case 200000: 681 break; 682 default: 683 MISSING_CASE(cdclk); 684 return; 685 } 686 687 /* There are cases where we can end up here with power domains 688 * off and a CDCLK frequency other than the minimum, like when 689 * issuing a modeset without actually changing any display after 690 * a system suspend. So grab the display core domain, which covers 691 * the HW blocks needed for the following programming. 692 */ 693 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE); 694 695 vlv_punit_get(dev_priv); 696 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); 697 val &= ~DSPFREQGUAR_MASK_CHV; 698 val |= (cmd << DSPFREQGUAR_SHIFT_CHV); 699 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val); 700 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & 701 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV), 702 50)) { 703 drm_err(&dev_priv->drm, 704 "timed out waiting for CDclk change\n"); 705 } 706 707 vlv_punit_put(dev_priv); 708 709 intel_update_cdclk(dev_priv); 710 711 vlv_program_pfi_credits(dev_priv); 712 713 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref); 714 } 715 716 static int bdw_calc_cdclk(int min_cdclk) 717 { 718 if (min_cdclk > 540000) 719 return 675000; 720 else if (min_cdclk > 450000) 721 return 540000; 722 else if (min_cdclk > 337500) 723 return 450000; 724 else 725 return 337500; 726 } 727 728 static u8 bdw_calc_voltage_level(int cdclk) 729 { 730 switch (cdclk) { 731 default: 732 case 337500: 733 return 2; 734 case 450000: 735 return 0; 736 case 540000: 737 return 1; 738 case 675000: 739 return 3; 740 } 741 } 742 743 static void bdw_get_cdclk(struct drm_i915_private *dev_priv, 744 struct intel_cdclk_config *cdclk_config) 745 { 746 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL); 747 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK; 748 749 if (lcpll & LCPLL_CD_SOURCE_FCLK) 750 cdclk_config->cdclk = 800000; 751 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT) 752 cdclk_config->cdclk = 450000; 753 else if (freq == LCPLL_CLK_FREQ_450) 754 cdclk_config->cdclk = 450000; 755 else if (freq == LCPLL_CLK_FREQ_54O_BDW) 756 cdclk_config->cdclk = 540000; 757 else if (freq == LCPLL_CLK_FREQ_337_5_BDW) 758 cdclk_config->cdclk = 337500; 759 else 760 cdclk_config->cdclk = 675000; 761 762 /* 763 * Can't read this out :( Let's assume it's 764 * at least what the CDCLK frequency requires. 765 */ 766 cdclk_config->voltage_level = 767 bdw_calc_voltage_level(cdclk_config->cdclk); 768 } 769 770 static u32 bdw_cdclk_freq_sel(int cdclk) 771 { 772 switch (cdclk) { 773 default: 774 MISSING_CASE(cdclk); 775 fallthrough; 776 case 337500: 777 return LCPLL_CLK_FREQ_337_5_BDW; 778 case 450000: 779 return LCPLL_CLK_FREQ_450; 780 case 540000: 781 return LCPLL_CLK_FREQ_54O_BDW; 782 case 675000: 783 return LCPLL_CLK_FREQ_675_BDW; 784 } 785 } 786 787 static void bdw_set_cdclk(struct drm_i915_private *dev_priv, 788 const struct intel_cdclk_config *cdclk_config, 789 enum pipe pipe) 790 { 791 int cdclk = cdclk_config->cdclk; 792 int ret; 793 794 if (drm_WARN(&dev_priv->drm, 795 (intel_de_read(dev_priv, LCPLL_CTL) & 796 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK | 797 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE | 798 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW | 799 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK, 800 "trying to change cdclk frequency with cdclk not enabled\n")) 801 return; 802 803 ret = snb_pcode_write(&dev_priv->uncore, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0); 804 if (ret) { 805 drm_err(&dev_priv->drm, 806 "failed to inform pcode about cdclk change\n"); 807 return; 808 } 809 810 intel_de_rmw(dev_priv, LCPLL_CTL, 811 0, LCPLL_CD_SOURCE_FCLK); 812 813 /* 814 * According to the spec, it should be enough to poll for this 1 us. 815 * However, extensive testing shows that this can take longer. 816 */ 817 if (wait_for_us(intel_de_read(dev_priv, LCPLL_CTL) & 818 LCPLL_CD_SOURCE_FCLK_DONE, 100)) 819 drm_err(&dev_priv->drm, "Switching to FCLK failed\n"); 820 821 intel_de_rmw(dev_priv, LCPLL_CTL, 822 LCPLL_CLK_FREQ_MASK, bdw_cdclk_freq_sel(cdclk)); 823 824 intel_de_rmw(dev_priv, LCPLL_CTL, 825 LCPLL_CD_SOURCE_FCLK, 0); 826 827 if (wait_for_us((intel_de_read(dev_priv, LCPLL_CTL) & 828 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) 829 drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n"); 830 831 snb_pcode_write(&dev_priv->uncore, HSW_PCODE_DE_WRITE_FREQ_REQ, 832 cdclk_config->voltage_level); 833 834 intel_de_write(dev_priv, CDCLK_FREQ, 835 DIV_ROUND_CLOSEST(cdclk, 1000) - 1); 836 837 intel_update_cdclk(dev_priv); 838 } 839 840 static int skl_calc_cdclk(int min_cdclk, int vco) 841 { 842 if (vco == 8640000) { 843 if (min_cdclk > 540000) 844 return 617143; 845 else if (min_cdclk > 432000) 846 return 540000; 847 else if (min_cdclk > 308571) 848 return 432000; 849 else 850 return 308571; 851 } else { 852 if (min_cdclk > 540000) 853 return 675000; 854 else if (min_cdclk > 450000) 855 return 540000; 856 else if (min_cdclk > 337500) 857 return 450000; 858 else 859 return 337500; 860 } 861 } 862 863 static u8 skl_calc_voltage_level(int cdclk) 864 { 865 if (cdclk > 540000) 866 return 3; 867 else if (cdclk > 450000) 868 return 2; 869 else if (cdclk > 337500) 870 return 1; 871 else 872 return 0; 873 } 874 875 static void skl_dpll0_update(struct drm_i915_private *dev_priv, 876 struct intel_cdclk_config *cdclk_config) 877 { 878 u32 val; 879 880 cdclk_config->ref = 24000; 881 cdclk_config->vco = 0; 882 883 val = intel_de_read(dev_priv, LCPLL1_CTL); 884 if ((val & LCPLL_PLL_ENABLE) == 0) 885 return; 886 887 if (drm_WARN_ON(&dev_priv->drm, (val & LCPLL_PLL_LOCK) == 0)) 888 return; 889 890 val = intel_de_read(dev_priv, DPLL_CTRL1); 891 892 if (drm_WARN_ON(&dev_priv->drm, 893 (val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | 894 DPLL_CTRL1_SSC(SKL_DPLL0) | 895 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) != 896 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) 897 return; 898 899 switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) { 900 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0): 901 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0): 902 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0): 903 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0): 904 cdclk_config->vco = 8100000; 905 break; 906 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0): 907 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0): 908 cdclk_config->vco = 8640000; 909 break; 910 default: 911 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); 912 break; 913 } 914 } 915 916 static void skl_get_cdclk(struct drm_i915_private *dev_priv, 917 struct intel_cdclk_config *cdclk_config) 918 { 919 u32 cdctl; 920 921 skl_dpll0_update(dev_priv, cdclk_config); 922 923 cdclk_config->cdclk = cdclk_config->bypass = cdclk_config->ref; 924 925 if (cdclk_config->vco == 0) 926 goto out; 927 928 cdctl = intel_de_read(dev_priv, CDCLK_CTL); 929 930 if (cdclk_config->vco == 8640000) { 931 switch (cdctl & CDCLK_FREQ_SEL_MASK) { 932 case CDCLK_FREQ_450_432: 933 cdclk_config->cdclk = 432000; 934 break; 935 case CDCLK_FREQ_337_308: 936 cdclk_config->cdclk = 308571; 937 break; 938 case CDCLK_FREQ_540: 939 cdclk_config->cdclk = 540000; 940 break; 941 case CDCLK_FREQ_675_617: 942 cdclk_config->cdclk = 617143; 943 break; 944 default: 945 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); 946 break; 947 } 948 } else { 949 switch (cdctl & CDCLK_FREQ_SEL_MASK) { 950 case CDCLK_FREQ_450_432: 951 cdclk_config->cdclk = 450000; 952 break; 953 case CDCLK_FREQ_337_308: 954 cdclk_config->cdclk = 337500; 955 break; 956 case CDCLK_FREQ_540: 957 cdclk_config->cdclk = 540000; 958 break; 959 case CDCLK_FREQ_675_617: 960 cdclk_config->cdclk = 675000; 961 break; 962 default: 963 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); 964 break; 965 } 966 } 967 968 out: 969 /* 970 * Can't read this out :( Let's assume it's 971 * at least what the CDCLK frequency requires. 972 */ 973 cdclk_config->voltage_level = 974 skl_calc_voltage_level(cdclk_config->cdclk); 975 } 976 977 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */ 978 static int skl_cdclk_decimal(int cdclk) 979 { 980 return DIV_ROUND_CLOSEST(cdclk - 1000, 500); 981 } 982 983 static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv, 984 int vco) 985 { 986 bool changed = dev_priv->skl_preferred_vco_freq != vco; 987 988 dev_priv->skl_preferred_vco_freq = vco; 989 990 if (changed) 991 intel_update_max_cdclk(dev_priv); 992 } 993 994 static u32 skl_dpll0_link_rate(struct drm_i915_private *dev_priv, int vco) 995 { 996 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000); 997 998 /* 999 * We always enable DPLL0 with the lowest link rate possible, but still 1000 * taking into account the VCO required to operate the eDP panel at the 1001 * desired frequency. The usual DP link rates operate with a VCO of 1002 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640. 1003 * The modeset code is responsible for the selection of the exact link 1004 * rate later on, with the constraint of choosing a frequency that 1005 * works with vco. 1006 */ 1007 if (vco == 8640000) 1008 return DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0); 1009 else 1010 return DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0); 1011 } 1012 1013 static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco) 1014 { 1015 intel_de_rmw(dev_priv, DPLL_CTRL1, 1016 DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | 1017 DPLL_CTRL1_SSC(SKL_DPLL0) | 1018 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0), 1019 DPLL_CTRL1_OVERRIDE(SKL_DPLL0) | 1020 skl_dpll0_link_rate(dev_priv, vco)); 1021 intel_de_posting_read(dev_priv, DPLL_CTRL1); 1022 1023 intel_de_rmw(dev_priv, LCPLL1_CTL, 1024 0, LCPLL_PLL_ENABLE); 1025 1026 if (intel_de_wait_for_set(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 5)) 1027 drm_err(&dev_priv->drm, "DPLL0 not locked\n"); 1028 1029 dev_priv->cdclk.hw.vco = vco; 1030 1031 /* We'll want to keep using the current vco from now on. */ 1032 skl_set_preferred_cdclk_vco(dev_priv, vco); 1033 } 1034 1035 static void skl_dpll0_disable(struct drm_i915_private *dev_priv) 1036 { 1037 intel_de_rmw(dev_priv, LCPLL1_CTL, 1038 LCPLL_PLL_ENABLE, 0); 1039 1040 if (intel_de_wait_for_clear(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 1)) 1041 drm_err(&dev_priv->drm, "Couldn't disable DPLL0\n"); 1042 1043 dev_priv->cdclk.hw.vco = 0; 1044 } 1045 1046 static u32 skl_cdclk_freq_sel(struct drm_i915_private *dev_priv, 1047 int cdclk, int vco) 1048 { 1049 switch (cdclk) { 1050 default: 1051 drm_WARN_ON(&dev_priv->drm, 1052 cdclk != dev_priv->cdclk.hw.bypass); 1053 drm_WARN_ON(&dev_priv->drm, vco != 0); 1054 fallthrough; 1055 case 308571: 1056 case 337500: 1057 return CDCLK_FREQ_337_308; 1058 case 450000: 1059 case 432000: 1060 return CDCLK_FREQ_450_432; 1061 case 540000: 1062 return CDCLK_FREQ_540; 1063 case 617143: 1064 case 675000: 1065 return CDCLK_FREQ_675_617; 1066 } 1067 } 1068 1069 static void skl_set_cdclk(struct drm_i915_private *dev_priv, 1070 const struct intel_cdclk_config *cdclk_config, 1071 enum pipe pipe) 1072 { 1073 int cdclk = cdclk_config->cdclk; 1074 int vco = cdclk_config->vco; 1075 u32 freq_select, cdclk_ctl; 1076 int ret; 1077 1078 /* 1079 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are 1080 * unsupported on SKL. In theory this should never happen since only 1081 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not 1082 * supported on SKL either, see the above WA. WARN whenever trying to 1083 * use the corresponding VCO freq as that always leads to using the 1084 * minimum 308MHz CDCLK. 1085 */ 1086 drm_WARN_ON_ONCE(&dev_priv->drm, 1087 IS_SKYLAKE(dev_priv) && vco == 8640000); 1088 1089 ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL, 1090 SKL_CDCLK_PREPARE_FOR_CHANGE, 1091 SKL_CDCLK_READY_FOR_CHANGE, 1092 SKL_CDCLK_READY_FOR_CHANGE, 3); 1093 if (ret) { 1094 drm_err(&dev_priv->drm, 1095 "Failed to inform PCU about cdclk change (%d)\n", ret); 1096 return; 1097 } 1098 1099 freq_select = skl_cdclk_freq_sel(dev_priv, cdclk, vco); 1100 1101 if (dev_priv->cdclk.hw.vco != 0 && 1102 dev_priv->cdclk.hw.vco != vco) 1103 skl_dpll0_disable(dev_priv); 1104 1105 cdclk_ctl = intel_de_read(dev_priv, CDCLK_CTL); 1106 1107 if (dev_priv->cdclk.hw.vco != vco) { 1108 /* Wa Display #1183: skl,kbl,cfl */ 1109 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK); 1110 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk); 1111 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1112 } 1113 1114 /* Wa Display #1183: skl,kbl,cfl */ 1115 cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE; 1116 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1117 intel_de_posting_read(dev_priv, CDCLK_CTL); 1118 1119 if (dev_priv->cdclk.hw.vco != vco) 1120 skl_dpll0_enable(dev_priv, vco); 1121 1122 /* Wa Display #1183: skl,kbl,cfl */ 1123 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK); 1124 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1125 1126 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk); 1127 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1128 1129 /* Wa Display #1183: skl,kbl,cfl */ 1130 cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE; 1131 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl); 1132 intel_de_posting_read(dev_priv, CDCLK_CTL); 1133 1134 /* inform PCU of the change */ 1135 snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL, 1136 cdclk_config->voltage_level); 1137 1138 intel_update_cdclk(dev_priv); 1139 } 1140 1141 static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv) 1142 { 1143 u32 cdctl, expected; 1144 1145 /* 1146 * check if the pre-os initialized the display 1147 * There is SWF18 scratchpad register defined which is set by the 1148 * pre-os which can be used by the OS drivers to check the status 1149 */ 1150 if ((intel_de_read(dev_priv, SWF_ILK(0x18)) & 0x00FFFFFF) == 0) 1151 goto sanitize; 1152 1153 intel_update_cdclk(dev_priv); 1154 intel_cdclk_dump_config(dev_priv, &dev_priv->cdclk.hw, "Current CDCLK"); 1155 1156 /* Is PLL enabled and locked ? */ 1157 if (dev_priv->cdclk.hw.vco == 0 || 1158 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass) 1159 goto sanitize; 1160 1161 /* DPLL okay; verify the cdclock 1162 * 1163 * Noticed in some instances that the freq selection is correct but 1164 * decimal part is programmed wrong from BIOS where pre-os does not 1165 * enable display. Verify the same as well. 1166 */ 1167 cdctl = intel_de_read(dev_priv, CDCLK_CTL); 1168 expected = (cdctl & CDCLK_FREQ_SEL_MASK) | 1169 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk); 1170 if (cdctl == expected) 1171 /* All well; nothing to sanitize */ 1172 return; 1173 1174 sanitize: 1175 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n"); 1176 1177 /* force cdclk programming */ 1178 dev_priv->cdclk.hw.cdclk = 0; 1179 /* force full PLL disable + enable */ 1180 dev_priv->cdclk.hw.vco = -1; 1181 } 1182 1183 static void skl_cdclk_init_hw(struct drm_i915_private *dev_priv) 1184 { 1185 struct intel_cdclk_config cdclk_config; 1186 1187 skl_sanitize_cdclk(dev_priv); 1188 1189 if (dev_priv->cdclk.hw.cdclk != 0 && 1190 dev_priv->cdclk.hw.vco != 0) { 1191 /* 1192 * Use the current vco as our initial 1193 * guess as to what the preferred vco is. 1194 */ 1195 if (dev_priv->skl_preferred_vco_freq == 0) 1196 skl_set_preferred_cdclk_vco(dev_priv, 1197 dev_priv->cdclk.hw.vco); 1198 return; 1199 } 1200 1201 cdclk_config = dev_priv->cdclk.hw; 1202 1203 cdclk_config.vco = dev_priv->skl_preferred_vco_freq; 1204 if (cdclk_config.vco == 0) 1205 cdclk_config.vco = 8100000; 1206 cdclk_config.cdclk = skl_calc_cdclk(0, cdclk_config.vco); 1207 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk); 1208 1209 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1210 } 1211 1212 static void skl_cdclk_uninit_hw(struct drm_i915_private *dev_priv) 1213 { 1214 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw; 1215 1216 cdclk_config.cdclk = cdclk_config.bypass; 1217 cdclk_config.vco = 0; 1218 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk); 1219 1220 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1221 } 1222 1223 static bool has_cdclk_squasher(struct drm_i915_private *i915) 1224 { 1225 return IS_DG2(i915); 1226 } 1227 1228 struct intel_cdclk_vals { 1229 u32 cdclk; 1230 u16 refclk; 1231 u16 waveform; 1232 u8 divider; /* CD2X divider * 2 */ 1233 u8 ratio; 1234 }; 1235 1236 static const struct intel_cdclk_vals bxt_cdclk_table[] = { 1237 { .refclk = 19200, .cdclk = 144000, .divider = 8, .ratio = 60 }, 1238 { .refclk = 19200, .cdclk = 288000, .divider = 4, .ratio = 60 }, 1239 { .refclk = 19200, .cdclk = 384000, .divider = 3, .ratio = 60 }, 1240 { .refclk = 19200, .cdclk = 576000, .divider = 2, .ratio = 60 }, 1241 { .refclk = 19200, .cdclk = 624000, .divider = 2, .ratio = 65 }, 1242 {} 1243 }; 1244 1245 static const struct intel_cdclk_vals glk_cdclk_table[] = { 1246 { .refclk = 19200, .cdclk = 79200, .divider = 8, .ratio = 33 }, 1247 { .refclk = 19200, .cdclk = 158400, .divider = 4, .ratio = 33 }, 1248 { .refclk = 19200, .cdclk = 316800, .divider = 2, .ratio = 33 }, 1249 {} 1250 }; 1251 1252 static const struct intel_cdclk_vals icl_cdclk_table[] = { 1253 { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 }, 1254 { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 }, 1255 { .refclk = 19200, .cdclk = 307200, .divider = 2, .ratio = 32 }, 1256 { .refclk = 19200, .cdclk = 326400, .divider = 4, .ratio = 68 }, 1257 { .refclk = 19200, .cdclk = 556800, .divider = 2, .ratio = 58 }, 1258 { .refclk = 19200, .cdclk = 652800, .divider = 2, .ratio = 68 }, 1259 1260 { .refclk = 24000, .cdclk = 180000, .divider = 2, .ratio = 15 }, 1261 { .refclk = 24000, .cdclk = 192000, .divider = 2, .ratio = 16 }, 1262 { .refclk = 24000, .cdclk = 312000, .divider = 2, .ratio = 26 }, 1263 { .refclk = 24000, .cdclk = 324000, .divider = 4, .ratio = 54 }, 1264 { .refclk = 24000, .cdclk = 552000, .divider = 2, .ratio = 46 }, 1265 { .refclk = 24000, .cdclk = 648000, .divider = 2, .ratio = 54 }, 1266 1267 { .refclk = 38400, .cdclk = 172800, .divider = 2, .ratio = 9 }, 1268 { .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 }, 1269 { .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 }, 1270 { .refclk = 38400, .cdclk = 326400, .divider = 4, .ratio = 34 }, 1271 { .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 }, 1272 { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 }, 1273 {} 1274 }; 1275 1276 static const struct intel_cdclk_vals rkl_cdclk_table[] = { 1277 { .refclk = 19200, .cdclk = 172800, .divider = 4, .ratio = 36 }, 1278 { .refclk = 19200, .cdclk = 192000, .divider = 4, .ratio = 40 }, 1279 { .refclk = 19200, .cdclk = 307200, .divider = 4, .ratio = 64 }, 1280 { .refclk = 19200, .cdclk = 326400, .divider = 8, .ratio = 136 }, 1281 { .refclk = 19200, .cdclk = 556800, .divider = 4, .ratio = 116 }, 1282 { .refclk = 19200, .cdclk = 652800, .divider = 4, .ratio = 136 }, 1283 1284 { .refclk = 24000, .cdclk = 180000, .divider = 4, .ratio = 30 }, 1285 { .refclk = 24000, .cdclk = 192000, .divider = 4, .ratio = 32 }, 1286 { .refclk = 24000, .cdclk = 312000, .divider = 4, .ratio = 52 }, 1287 { .refclk = 24000, .cdclk = 324000, .divider = 8, .ratio = 108 }, 1288 { .refclk = 24000, .cdclk = 552000, .divider = 4, .ratio = 92 }, 1289 { .refclk = 24000, .cdclk = 648000, .divider = 4, .ratio = 108 }, 1290 1291 { .refclk = 38400, .cdclk = 172800, .divider = 4, .ratio = 18 }, 1292 { .refclk = 38400, .cdclk = 192000, .divider = 4, .ratio = 20 }, 1293 { .refclk = 38400, .cdclk = 307200, .divider = 4, .ratio = 32 }, 1294 { .refclk = 38400, .cdclk = 326400, .divider = 8, .ratio = 68 }, 1295 { .refclk = 38400, .cdclk = 556800, .divider = 4, .ratio = 58 }, 1296 { .refclk = 38400, .cdclk = 652800, .divider = 4, .ratio = 68 }, 1297 {} 1298 }; 1299 1300 static const struct intel_cdclk_vals adlp_a_step_cdclk_table[] = { 1301 { .refclk = 19200, .cdclk = 307200, .divider = 2, .ratio = 32 }, 1302 { .refclk = 19200, .cdclk = 556800, .divider = 2, .ratio = 58 }, 1303 { .refclk = 19200, .cdclk = 652800, .divider = 2, .ratio = 68 }, 1304 1305 { .refclk = 24000, .cdclk = 312000, .divider = 2, .ratio = 26 }, 1306 { .refclk = 24000, .cdclk = 552000, .divider = 2, .ratio = 46 }, 1307 { .refclk = 24400, .cdclk = 648000, .divider = 2, .ratio = 54 }, 1308 1309 { .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 }, 1310 { .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 }, 1311 { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 }, 1312 {} 1313 }; 1314 1315 static const struct intel_cdclk_vals adlp_cdclk_table[] = { 1316 { .refclk = 19200, .cdclk = 172800, .divider = 3, .ratio = 27 }, 1317 { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 }, 1318 { .refclk = 19200, .cdclk = 307200, .divider = 2, .ratio = 32 }, 1319 { .refclk = 19200, .cdclk = 556800, .divider = 2, .ratio = 58 }, 1320 { .refclk = 19200, .cdclk = 652800, .divider = 2, .ratio = 68 }, 1321 1322 { .refclk = 24000, .cdclk = 176000, .divider = 3, .ratio = 22 }, 1323 { .refclk = 24000, .cdclk = 192000, .divider = 2, .ratio = 16 }, 1324 { .refclk = 24000, .cdclk = 312000, .divider = 2, .ratio = 26 }, 1325 { .refclk = 24000, .cdclk = 552000, .divider = 2, .ratio = 46 }, 1326 { .refclk = 24400, .cdclk = 648000, .divider = 2, .ratio = 54 }, 1327 1328 { .refclk = 38400, .cdclk = 179200, .divider = 3, .ratio = 14 }, 1329 { .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 }, 1330 { .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 }, 1331 { .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 }, 1332 { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 }, 1333 {} 1334 }; 1335 1336 static const struct intel_cdclk_vals dg2_cdclk_table[] = { 1337 { .refclk = 38400, .cdclk = 163200, .divider = 2, .ratio = 34, .waveform = 0x8888 }, 1338 { .refclk = 38400, .cdclk = 204000, .divider = 2, .ratio = 34, .waveform = 0x9248 }, 1339 { .refclk = 38400, .cdclk = 244800, .divider = 2, .ratio = 34, .waveform = 0xa4a4 }, 1340 { .refclk = 38400, .cdclk = 285600, .divider = 2, .ratio = 34, .waveform = 0xa54a }, 1341 { .refclk = 38400, .cdclk = 326400, .divider = 2, .ratio = 34, .waveform = 0xaaaa }, 1342 { .refclk = 38400, .cdclk = 367200, .divider = 2, .ratio = 34, .waveform = 0xad5a }, 1343 { .refclk = 38400, .cdclk = 408000, .divider = 2, .ratio = 34, .waveform = 0xb6b6 }, 1344 { .refclk = 38400, .cdclk = 448800, .divider = 2, .ratio = 34, .waveform = 0xdbb6 }, 1345 { .refclk = 38400, .cdclk = 489600, .divider = 2, .ratio = 34, .waveform = 0xeeee }, 1346 { .refclk = 38400, .cdclk = 530400, .divider = 2, .ratio = 34, .waveform = 0xf7de }, 1347 { .refclk = 38400, .cdclk = 571200, .divider = 2, .ratio = 34, .waveform = 0xfefe }, 1348 { .refclk = 38400, .cdclk = 612000, .divider = 2, .ratio = 34, .waveform = 0xfffe }, 1349 { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34, .waveform = 0xffff }, 1350 {} 1351 }; 1352 1353 static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk) 1354 { 1355 const struct intel_cdclk_vals *table = dev_priv->cdclk.table; 1356 int i; 1357 1358 for (i = 0; table[i].refclk; i++) 1359 if (table[i].refclk == dev_priv->cdclk.hw.ref && 1360 table[i].cdclk >= min_cdclk) 1361 return table[i].cdclk; 1362 1363 drm_WARN(&dev_priv->drm, 1, 1364 "Cannot satisfy minimum cdclk %d with refclk %u\n", 1365 min_cdclk, dev_priv->cdclk.hw.ref); 1366 return 0; 1367 } 1368 1369 static int bxt_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk) 1370 { 1371 const struct intel_cdclk_vals *table = dev_priv->cdclk.table; 1372 int i; 1373 1374 if (cdclk == dev_priv->cdclk.hw.bypass) 1375 return 0; 1376 1377 for (i = 0; table[i].refclk; i++) 1378 if (table[i].refclk == dev_priv->cdclk.hw.ref && 1379 table[i].cdclk == cdclk) 1380 return dev_priv->cdclk.hw.ref * table[i].ratio; 1381 1382 drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n", 1383 cdclk, dev_priv->cdclk.hw.ref); 1384 return 0; 1385 } 1386 1387 static u8 bxt_calc_voltage_level(int cdclk) 1388 { 1389 return DIV_ROUND_UP(cdclk, 25000); 1390 } 1391 1392 static u8 icl_calc_voltage_level(int cdclk) 1393 { 1394 if (cdclk > 556800) 1395 return 2; 1396 else if (cdclk > 312000) 1397 return 1; 1398 else 1399 return 0; 1400 } 1401 1402 static u8 ehl_calc_voltage_level(int cdclk) 1403 { 1404 if (cdclk > 326400) 1405 return 3; 1406 else if (cdclk > 312000) 1407 return 2; 1408 else if (cdclk > 180000) 1409 return 1; 1410 else 1411 return 0; 1412 } 1413 1414 static u8 tgl_calc_voltage_level(int cdclk) 1415 { 1416 if (cdclk > 556800) 1417 return 3; 1418 else if (cdclk > 326400) 1419 return 2; 1420 else if (cdclk > 312000) 1421 return 1; 1422 else 1423 return 0; 1424 } 1425 1426 static void icl_readout_refclk(struct drm_i915_private *dev_priv, 1427 struct intel_cdclk_config *cdclk_config) 1428 { 1429 u32 dssm = intel_de_read(dev_priv, SKL_DSSM) & ICL_DSSM_CDCLK_PLL_REFCLK_MASK; 1430 1431 switch (dssm) { 1432 default: 1433 MISSING_CASE(dssm); 1434 fallthrough; 1435 case ICL_DSSM_CDCLK_PLL_REFCLK_24MHz: 1436 cdclk_config->ref = 24000; 1437 break; 1438 case ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz: 1439 cdclk_config->ref = 19200; 1440 break; 1441 case ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz: 1442 cdclk_config->ref = 38400; 1443 break; 1444 } 1445 } 1446 1447 static void bxt_de_pll_readout(struct drm_i915_private *dev_priv, 1448 struct intel_cdclk_config *cdclk_config) 1449 { 1450 u32 val, ratio; 1451 1452 if (IS_DG2(dev_priv)) 1453 cdclk_config->ref = 38400; 1454 else if (DISPLAY_VER(dev_priv) >= 11) 1455 icl_readout_refclk(dev_priv, cdclk_config); 1456 else 1457 cdclk_config->ref = 19200; 1458 1459 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE); 1460 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0 || 1461 (val & BXT_DE_PLL_LOCK) == 0) { 1462 /* 1463 * CDCLK PLL is disabled, the VCO/ratio doesn't matter, but 1464 * setting it to zero is a way to signal that. 1465 */ 1466 cdclk_config->vco = 0; 1467 return; 1468 } 1469 1470 /* 1471 * DISPLAY_VER >= 11 have the ratio directly in the PLL enable register, 1472 * gen9lp had it in a separate PLL control register. 1473 */ 1474 if (DISPLAY_VER(dev_priv) >= 11) 1475 ratio = val & ICL_CDCLK_PLL_RATIO_MASK; 1476 else 1477 ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK; 1478 1479 cdclk_config->vco = ratio * cdclk_config->ref; 1480 } 1481 1482 static void bxt_get_cdclk(struct drm_i915_private *dev_priv, 1483 struct intel_cdclk_config *cdclk_config) 1484 { 1485 u32 squash_ctl = 0; 1486 u32 divider; 1487 int div; 1488 1489 bxt_de_pll_readout(dev_priv, cdclk_config); 1490 1491 if (DISPLAY_VER(dev_priv) >= 12) 1492 cdclk_config->bypass = cdclk_config->ref / 2; 1493 else if (DISPLAY_VER(dev_priv) >= 11) 1494 cdclk_config->bypass = 50000; 1495 else 1496 cdclk_config->bypass = cdclk_config->ref; 1497 1498 if (cdclk_config->vco == 0) { 1499 cdclk_config->cdclk = cdclk_config->bypass; 1500 goto out; 1501 } 1502 1503 divider = intel_de_read(dev_priv, CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK; 1504 1505 switch (divider) { 1506 case BXT_CDCLK_CD2X_DIV_SEL_1: 1507 div = 2; 1508 break; 1509 case BXT_CDCLK_CD2X_DIV_SEL_1_5: 1510 div = 3; 1511 break; 1512 case BXT_CDCLK_CD2X_DIV_SEL_2: 1513 div = 4; 1514 break; 1515 case BXT_CDCLK_CD2X_DIV_SEL_4: 1516 div = 8; 1517 break; 1518 default: 1519 MISSING_CASE(divider); 1520 return; 1521 } 1522 1523 if (has_cdclk_squasher(dev_priv)) 1524 squash_ctl = intel_de_read(dev_priv, CDCLK_SQUASH_CTL); 1525 1526 if (squash_ctl & CDCLK_SQUASH_ENABLE) { 1527 u16 waveform; 1528 int size; 1529 1530 size = REG_FIELD_GET(CDCLK_SQUASH_WINDOW_SIZE_MASK, squash_ctl) + 1; 1531 waveform = REG_FIELD_GET(CDCLK_SQUASH_WAVEFORM_MASK, squash_ctl) >> (16 - size); 1532 1533 cdclk_config->cdclk = DIV_ROUND_CLOSEST(hweight16(waveform) * 1534 cdclk_config->vco, size * div); 1535 } else { 1536 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, div); 1537 } 1538 1539 out: 1540 /* 1541 * Can't read this out :( Let's assume it's 1542 * at least what the CDCLK frequency requires. 1543 */ 1544 cdclk_config->voltage_level = 1545 intel_cdclk_calc_voltage_level(dev_priv, cdclk_config->cdclk); 1546 } 1547 1548 static void bxt_de_pll_disable(struct drm_i915_private *dev_priv) 1549 { 1550 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, 0); 1551 1552 /* Timeout 200us */ 1553 if (intel_de_wait_for_clear(dev_priv, 1554 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1)) 1555 drm_err(&dev_priv->drm, "timeout waiting for DE PLL unlock\n"); 1556 1557 dev_priv->cdclk.hw.vco = 0; 1558 } 1559 1560 static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco) 1561 { 1562 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref); 1563 1564 intel_de_rmw(dev_priv, BXT_DE_PLL_CTL, 1565 BXT_DE_PLL_RATIO_MASK, BXT_DE_PLL_RATIO(ratio)); 1566 1567 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE); 1568 1569 /* Timeout 200us */ 1570 if (intel_de_wait_for_set(dev_priv, 1571 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1)) 1572 drm_err(&dev_priv->drm, "timeout waiting for DE PLL lock\n"); 1573 1574 dev_priv->cdclk.hw.vco = vco; 1575 } 1576 1577 static void icl_cdclk_pll_disable(struct drm_i915_private *dev_priv) 1578 { 1579 intel_de_rmw(dev_priv, BXT_DE_PLL_ENABLE, 1580 BXT_DE_PLL_PLL_ENABLE, 0); 1581 1582 /* Timeout 200us */ 1583 if (intel_de_wait_for_clear(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1)) 1584 drm_err(&dev_priv->drm, "timeout waiting for CDCLK PLL unlock\n"); 1585 1586 dev_priv->cdclk.hw.vco = 0; 1587 } 1588 1589 static void icl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco) 1590 { 1591 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref); 1592 u32 val; 1593 1594 val = ICL_CDCLK_PLL_RATIO(ratio); 1595 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1596 1597 val |= BXT_DE_PLL_PLL_ENABLE; 1598 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1599 1600 /* Timeout 200us */ 1601 if (intel_de_wait_for_set(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1)) 1602 drm_err(&dev_priv->drm, "timeout waiting for CDCLK PLL lock\n"); 1603 1604 dev_priv->cdclk.hw.vco = vco; 1605 } 1606 1607 static void adlp_cdclk_pll_crawl(struct drm_i915_private *dev_priv, int vco) 1608 { 1609 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref); 1610 u32 val; 1611 1612 /* Write PLL ratio without disabling */ 1613 val = ICL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE; 1614 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1615 1616 /* Submit freq change request */ 1617 val |= BXT_DE_PLL_FREQ_REQ; 1618 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1619 1620 /* Timeout 200us */ 1621 if (intel_de_wait_for_set(dev_priv, BXT_DE_PLL_ENABLE, 1622 BXT_DE_PLL_LOCK | BXT_DE_PLL_FREQ_REQ_ACK, 1)) 1623 drm_err(&dev_priv->drm, "timeout waiting for FREQ change request ack\n"); 1624 1625 val &= ~BXT_DE_PLL_FREQ_REQ; 1626 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val); 1627 1628 dev_priv->cdclk.hw.vco = vco; 1629 } 1630 1631 static u32 bxt_cdclk_cd2x_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) 1632 { 1633 if (DISPLAY_VER(dev_priv) >= 12) { 1634 if (pipe == INVALID_PIPE) 1635 return TGL_CDCLK_CD2X_PIPE_NONE; 1636 else 1637 return TGL_CDCLK_CD2X_PIPE(pipe); 1638 } else if (DISPLAY_VER(dev_priv) >= 11) { 1639 if (pipe == INVALID_PIPE) 1640 return ICL_CDCLK_CD2X_PIPE_NONE; 1641 else 1642 return ICL_CDCLK_CD2X_PIPE(pipe); 1643 } else { 1644 if (pipe == INVALID_PIPE) 1645 return BXT_CDCLK_CD2X_PIPE_NONE; 1646 else 1647 return BXT_CDCLK_CD2X_PIPE(pipe); 1648 } 1649 } 1650 1651 static u32 bxt_cdclk_cd2x_div_sel(struct drm_i915_private *dev_priv, 1652 int cdclk, int vco) 1653 { 1654 /* cdclk = vco / 2 / div{1,1.5,2,4} */ 1655 switch (DIV_ROUND_CLOSEST(vco, cdclk)) { 1656 default: 1657 drm_WARN_ON(&dev_priv->drm, 1658 cdclk != dev_priv->cdclk.hw.bypass); 1659 drm_WARN_ON(&dev_priv->drm, vco != 0); 1660 fallthrough; 1661 case 2: 1662 return BXT_CDCLK_CD2X_DIV_SEL_1; 1663 case 3: 1664 return BXT_CDCLK_CD2X_DIV_SEL_1_5; 1665 case 4: 1666 return BXT_CDCLK_CD2X_DIV_SEL_2; 1667 case 8: 1668 return BXT_CDCLK_CD2X_DIV_SEL_4; 1669 } 1670 } 1671 1672 static u32 cdclk_squash_waveform(struct drm_i915_private *dev_priv, 1673 int cdclk) 1674 { 1675 const struct intel_cdclk_vals *table = dev_priv->cdclk.table; 1676 int i; 1677 1678 if (cdclk == dev_priv->cdclk.hw.bypass) 1679 return 0; 1680 1681 for (i = 0; table[i].refclk; i++) 1682 if (table[i].refclk == dev_priv->cdclk.hw.ref && 1683 table[i].cdclk == cdclk) 1684 return table[i].waveform; 1685 1686 drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n", 1687 cdclk, dev_priv->cdclk.hw.ref); 1688 1689 return 0xffff; 1690 } 1691 1692 static void bxt_set_cdclk(struct drm_i915_private *dev_priv, 1693 const struct intel_cdclk_config *cdclk_config, 1694 enum pipe pipe) 1695 { 1696 int cdclk = cdclk_config->cdclk; 1697 int vco = cdclk_config->vco; 1698 u32 val; 1699 u16 waveform; 1700 int clock; 1701 int ret; 1702 1703 /* Inform power controller of upcoming frequency change. */ 1704 if (DISPLAY_VER(dev_priv) >= 11) 1705 ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL, 1706 SKL_CDCLK_PREPARE_FOR_CHANGE, 1707 SKL_CDCLK_READY_FOR_CHANGE, 1708 SKL_CDCLK_READY_FOR_CHANGE, 3); 1709 else 1710 /* 1711 * BSpec requires us to wait up to 150usec, but that leads to 1712 * timeouts; the 2ms used here is based on experiment. 1713 */ 1714 ret = snb_pcode_write_timeout(&dev_priv->uncore, 1715 HSW_PCODE_DE_WRITE_FREQ_REQ, 1716 0x80000000, 150, 2); 1717 if (ret) { 1718 drm_err(&dev_priv->drm, 1719 "Failed to inform PCU about cdclk change (err %d, freq %d)\n", 1720 ret, cdclk); 1721 return; 1722 } 1723 1724 if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->cdclk.hw.vco > 0 && vco > 0) { 1725 if (dev_priv->cdclk.hw.vco != vco) 1726 adlp_cdclk_pll_crawl(dev_priv, vco); 1727 } else if (DISPLAY_VER(dev_priv) >= 11) { 1728 if (dev_priv->cdclk.hw.vco != 0 && 1729 dev_priv->cdclk.hw.vco != vco) 1730 icl_cdclk_pll_disable(dev_priv); 1731 1732 if (dev_priv->cdclk.hw.vco != vco) 1733 icl_cdclk_pll_enable(dev_priv, vco); 1734 } else { 1735 if (dev_priv->cdclk.hw.vco != 0 && 1736 dev_priv->cdclk.hw.vco != vco) 1737 bxt_de_pll_disable(dev_priv); 1738 1739 if (dev_priv->cdclk.hw.vco != vco) 1740 bxt_de_pll_enable(dev_priv, vco); 1741 } 1742 1743 waveform = cdclk_squash_waveform(dev_priv, cdclk); 1744 1745 if (waveform) 1746 clock = vco / 2; 1747 else 1748 clock = cdclk; 1749 1750 if (has_cdclk_squasher(dev_priv)) { 1751 u32 squash_ctl = 0; 1752 1753 if (waveform) 1754 squash_ctl = CDCLK_SQUASH_ENABLE | 1755 CDCLK_SQUASH_WINDOW_SIZE(0xf) | waveform; 1756 1757 intel_de_write(dev_priv, CDCLK_SQUASH_CTL, squash_ctl); 1758 } 1759 1760 val = bxt_cdclk_cd2x_div_sel(dev_priv, clock, vco) | 1761 bxt_cdclk_cd2x_pipe(dev_priv, pipe) | 1762 skl_cdclk_decimal(cdclk); 1763 1764 /* 1765 * Disable SSA Precharge when CD clock frequency < 500 MHz, 1766 * enable otherwise. 1767 */ 1768 if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) && 1769 cdclk >= 500000) 1770 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; 1771 intel_de_write(dev_priv, CDCLK_CTL, val); 1772 1773 if (pipe != INVALID_PIPE) 1774 intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe)); 1775 1776 if (DISPLAY_VER(dev_priv) >= 11) { 1777 ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL, 1778 cdclk_config->voltage_level); 1779 } else { 1780 /* 1781 * The timeout isn't specified, the 2ms used here is based on 1782 * experiment. 1783 * FIXME: Waiting for the request completion could be delayed 1784 * until the next PCODE request based on BSpec. 1785 */ 1786 ret = snb_pcode_write_timeout(&dev_priv->uncore, 1787 HSW_PCODE_DE_WRITE_FREQ_REQ, 1788 cdclk_config->voltage_level, 1789 150, 2); 1790 } 1791 1792 if (ret) { 1793 drm_err(&dev_priv->drm, 1794 "PCode CDCLK freq set failed, (err %d, freq %d)\n", 1795 ret, cdclk); 1796 return; 1797 } 1798 1799 intel_update_cdclk(dev_priv); 1800 1801 if (DISPLAY_VER(dev_priv) >= 11) 1802 /* 1803 * Can't read out the voltage level :( 1804 * Let's just assume everything is as expected. 1805 */ 1806 dev_priv->cdclk.hw.voltage_level = cdclk_config->voltage_level; 1807 } 1808 1809 static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv) 1810 { 1811 u32 cdctl, expected; 1812 int cdclk, clock, vco; 1813 1814 intel_update_cdclk(dev_priv); 1815 intel_cdclk_dump_config(dev_priv, &dev_priv->cdclk.hw, "Current CDCLK"); 1816 1817 if (dev_priv->cdclk.hw.vco == 0 || 1818 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass) 1819 goto sanitize; 1820 1821 /* DPLL okay; verify the cdclock 1822 * 1823 * Some BIOS versions leave an incorrect decimal frequency value and 1824 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4, 1825 * so sanitize this register. 1826 */ 1827 cdctl = intel_de_read(dev_priv, CDCLK_CTL); 1828 /* 1829 * Let's ignore the pipe field, since BIOS could have configured the 1830 * dividers both synching to an active pipe, or asynchronously 1831 * (PIPE_NONE). 1832 */ 1833 cdctl &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE); 1834 1835 /* Make sure this is a legal cdclk value for the platform */ 1836 cdclk = bxt_calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk); 1837 if (cdclk != dev_priv->cdclk.hw.cdclk) 1838 goto sanitize; 1839 1840 /* Make sure the VCO is correct for the cdclk */ 1841 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk); 1842 if (vco != dev_priv->cdclk.hw.vco) 1843 goto sanitize; 1844 1845 expected = skl_cdclk_decimal(cdclk); 1846 1847 /* Figure out what CD2X divider we should be using for this cdclk */ 1848 if (has_cdclk_squasher(dev_priv)) 1849 clock = dev_priv->cdclk.hw.vco / 2; 1850 else 1851 clock = dev_priv->cdclk.hw.cdclk; 1852 1853 expected |= bxt_cdclk_cd2x_div_sel(dev_priv, clock, 1854 dev_priv->cdclk.hw.vco); 1855 1856 /* 1857 * Disable SSA Precharge when CD clock frequency < 500 MHz, 1858 * enable otherwise. 1859 */ 1860 if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) && 1861 dev_priv->cdclk.hw.cdclk >= 500000) 1862 expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; 1863 1864 if (cdctl == expected) 1865 /* All well; nothing to sanitize */ 1866 return; 1867 1868 sanitize: 1869 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n"); 1870 1871 /* force cdclk programming */ 1872 dev_priv->cdclk.hw.cdclk = 0; 1873 1874 /* force full PLL disable + enable */ 1875 dev_priv->cdclk.hw.vco = -1; 1876 } 1877 1878 static void bxt_cdclk_init_hw(struct drm_i915_private *dev_priv) 1879 { 1880 struct intel_cdclk_config cdclk_config; 1881 1882 bxt_sanitize_cdclk(dev_priv); 1883 1884 if (dev_priv->cdclk.hw.cdclk != 0 && 1885 dev_priv->cdclk.hw.vco != 0) 1886 return; 1887 1888 cdclk_config = dev_priv->cdclk.hw; 1889 1890 /* 1891 * FIXME: 1892 * - The initial CDCLK needs to be read from VBT. 1893 * Need to make this change after VBT has changes for BXT. 1894 */ 1895 cdclk_config.cdclk = bxt_calc_cdclk(dev_priv, 0); 1896 cdclk_config.vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk_config.cdclk); 1897 cdclk_config.voltage_level = 1898 intel_cdclk_calc_voltage_level(dev_priv, cdclk_config.cdclk); 1899 1900 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1901 } 1902 1903 static void bxt_cdclk_uninit_hw(struct drm_i915_private *dev_priv) 1904 { 1905 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw; 1906 1907 cdclk_config.cdclk = cdclk_config.bypass; 1908 cdclk_config.vco = 0; 1909 cdclk_config.voltage_level = 1910 intel_cdclk_calc_voltage_level(dev_priv, cdclk_config.cdclk); 1911 1912 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE); 1913 } 1914 1915 /** 1916 * intel_cdclk_init_hw - Initialize CDCLK hardware 1917 * @i915: i915 device 1918 * 1919 * Initialize CDCLK. This consists mainly of initializing dev_priv->cdclk.hw and 1920 * sanitizing the state of the hardware if needed. This is generally done only 1921 * during the display core initialization sequence, after which the DMC will 1922 * take care of turning CDCLK off/on as needed. 1923 */ 1924 void intel_cdclk_init_hw(struct drm_i915_private *i915) 1925 { 1926 if (DISPLAY_VER(i915) >= 10 || IS_BROXTON(i915)) 1927 bxt_cdclk_init_hw(i915); 1928 else if (DISPLAY_VER(i915) == 9) 1929 skl_cdclk_init_hw(i915); 1930 } 1931 1932 /** 1933 * intel_cdclk_uninit_hw - Uninitialize CDCLK hardware 1934 * @i915: i915 device 1935 * 1936 * Uninitialize CDCLK. This is done only during the display core 1937 * uninitialization sequence. 1938 */ 1939 void intel_cdclk_uninit_hw(struct drm_i915_private *i915) 1940 { 1941 if (DISPLAY_VER(i915) >= 10 || IS_BROXTON(i915)) 1942 bxt_cdclk_uninit_hw(i915); 1943 else if (DISPLAY_VER(i915) == 9) 1944 skl_cdclk_uninit_hw(i915); 1945 } 1946 1947 static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv, 1948 const struct intel_cdclk_config *a, 1949 const struct intel_cdclk_config *b) 1950 { 1951 int a_div, b_div; 1952 1953 if (!HAS_CDCLK_CRAWL(dev_priv)) 1954 return false; 1955 1956 /* 1957 * The vco and cd2x divider will change independently 1958 * from each, so we disallow cd2x change when crawling. 1959 */ 1960 a_div = DIV_ROUND_CLOSEST(a->vco, a->cdclk); 1961 b_div = DIV_ROUND_CLOSEST(b->vco, b->cdclk); 1962 1963 return a->vco != 0 && b->vco != 0 && 1964 a->vco != b->vco && 1965 a_div == b_div && 1966 a->ref == b->ref; 1967 } 1968 1969 static bool intel_cdclk_can_squash(struct drm_i915_private *dev_priv, 1970 const struct intel_cdclk_config *a, 1971 const struct intel_cdclk_config *b) 1972 { 1973 /* 1974 * FIXME should store a bit more state in intel_cdclk_config 1975 * to differentiate squasher vs. cd2x divider properly. For 1976 * the moment all platforms with squasher use a fixed cd2x 1977 * divider. 1978 */ 1979 if (!has_cdclk_squasher(dev_priv)) 1980 return false; 1981 1982 return a->cdclk != b->cdclk && 1983 a->vco != 0 && 1984 a->vco == b->vco && 1985 a->ref == b->ref; 1986 } 1987 1988 /** 1989 * intel_cdclk_needs_modeset - Determine if changong between the CDCLK 1990 * configurations requires a modeset on all pipes 1991 * @a: first CDCLK configuration 1992 * @b: second CDCLK configuration 1993 * 1994 * Returns: 1995 * True if changing between the two CDCLK configurations 1996 * requires all pipes to be off, false if not. 1997 */ 1998 bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a, 1999 const struct intel_cdclk_config *b) 2000 { 2001 return a->cdclk != b->cdclk || 2002 a->vco != b->vco || 2003 a->ref != b->ref; 2004 } 2005 2006 /** 2007 * intel_cdclk_can_cd2x_update - Determine if changing between the two CDCLK 2008 * configurations requires only a cd2x divider update 2009 * @dev_priv: i915 device 2010 * @a: first CDCLK configuration 2011 * @b: second CDCLK configuration 2012 * 2013 * Returns: 2014 * True if changing between the two CDCLK configurations 2015 * can be done with just a cd2x divider update, false if not. 2016 */ 2017 static bool intel_cdclk_can_cd2x_update(struct drm_i915_private *dev_priv, 2018 const struct intel_cdclk_config *a, 2019 const struct intel_cdclk_config *b) 2020 { 2021 /* Older hw doesn't have the capability */ 2022 if (DISPLAY_VER(dev_priv) < 10 && !IS_BROXTON(dev_priv)) 2023 return false; 2024 2025 /* 2026 * FIXME should store a bit more state in intel_cdclk_config 2027 * to differentiate squasher vs. cd2x divider properly. For 2028 * the moment all platforms with squasher use a fixed cd2x 2029 * divider. 2030 */ 2031 if (has_cdclk_squasher(dev_priv)) 2032 return false; 2033 2034 return a->cdclk != b->cdclk && 2035 a->vco != 0 && 2036 a->vco == b->vco && 2037 a->ref == b->ref; 2038 } 2039 2040 /** 2041 * intel_cdclk_changed - Determine if two CDCLK configurations are different 2042 * @a: first CDCLK configuration 2043 * @b: second CDCLK configuration 2044 * 2045 * Returns: 2046 * True if the CDCLK configurations don't match, false if they do. 2047 */ 2048 static bool intel_cdclk_changed(const struct intel_cdclk_config *a, 2049 const struct intel_cdclk_config *b) 2050 { 2051 return intel_cdclk_needs_modeset(a, b) || 2052 a->voltage_level != b->voltage_level; 2053 } 2054 2055 void intel_cdclk_dump_config(struct drm_i915_private *i915, 2056 const struct intel_cdclk_config *cdclk_config, 2057 const char *context) 2058 { 2059 drm_dbg_kms(&i915->drm, "%s %d kHz, VCO %d kHz, ref %d kHz, bypass %d kHz, voltage level %d\n", 2060 context, cdclk_config->cdclk, cdclk_config->vco, 2061 cdclk_config->ref, cdclk_config->bypass, 2062 cdclk_config->voltage_level); 2063 } 2064 2065 /** 2066 * intel_set_cdclk - Push the CDCLK configuration to the hardware 2067 * @dev_priv: i915 device 2068 * @cdclk_config: new CDCLK configuration 2069 * @pipe: pipe with which to synchronize the update 2070 * 2071 * Program the hardware based on the passed in CDCLK state, 2072 * if necessary. 2073 */ 2074 static void intel_set_cdclk(struct drm_i915_private *dev_priv, 2075 const struct intel_cdclk_config *cdclk_config, 2076 enum pipe pipe) 2077 { 2078 struct intel_encoder *encoder; 2079 2080 if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config)) 2081 return; 2082 2083 if (drm_WARN_ON_ONCE(&dev_priv->drm, !dev_priv->cdclk_funcs->set_cdclk)) 2084 return; 2085 2086 intel_cdclk_dump_config(dev_priv, cdclk_config, "Changing CDCLK to"); 2087 2088 for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) { 2089 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2090 2091 intel_psr_pause(intel_dp); 2092 } 2093 2094 intel_audio_cdclk_change_pre(dev_priv); 2095 2096 /* 2097 * Lock aux/gmbus while we change cdclk in case those 2098 * functions use cdclk. Not all platforms/ports do, 2099 * but we'll lock them all for simplicity. 2100 */ 2101 mutex_lock(&dev_priv->gmbus_mutex); 2102 for_each_intel_dp(&dev_priv->drm, encoder) { 2103 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2104 2105 mutex_lock_nest_lock(&intel_dp->aux.hw_mutex, 2106 &dev_priv->gmbus_mutex); 2107 } 2108 2109 intel_cdclk_set_cdclk(dev_priv, cdclk_config, pipe); 2110 2111 for_each_intel_dp(&dev_priv->drm, encoder) { 2112 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2113 2114 mutex_unlock(&intel_dp->aux.hw_mutex); 2115 } 2116 mutex_unlock(&dev_priv->gmbus_mutex); 2117 2118 for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) { 2119 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 2120 2121 intel_psr_resume(intel_dp); 2122 } 2123 2124 intel_audio_cdclk_change_post(dev_priv); 2125 2126 if (drm_WARN(&dev_priv->drm, 2127 intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config), 2128 "cdclk state doesn't match!\n")) { 2129 intel_cdclk_dump_config(dev_priv, &dev_priv->cdclk.hw, "[hw state]"); 2130 intel_cdclk_dump_config(dev_priv, cdclk_config, "[sw state]"); 2131 } 2132 } 2133 2134 /** 2135 * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware 2136 * @state: intel atomic state 2137 * 2138 * Program the hardware before updating the HW plane state based on the 2139 * new CDCLK state, if necessary. 2140 */ 2141 void 2142 intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state) 2143 { 2144 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2145 const struct intel_cdclk_state *old_cdclk_state = 2146 intel_atomic_get_old_cdclk_state(state); 2147 const struct intel_cdclk_state *new_cdclk_state = 2148 intel_atomic_get_new_cdclk_state(state); 2149 enum pipe pipe = new_cdclk_state->pipe; 2150 2151 if (!intel_cdclk_changed(&old_cdclk_state->actual, 2152 &new_cdclk_state->actual)) 2153 return; 2154 2155 if (pipe == INVALID_PIPE || 2156 old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) { 2157 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed); 2158 2159 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe); 2160 } 2161 } 2162 2163 /** 2164 * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware 2165 * @state: intel atomic state 2166 * 2167 * Program the hardware after updating the HW plane state based on the 2168 * new CDCLK state, if necessary. 2169 */ 2170 void 2171 intel_set_cdclk_post_plane_update(struct intel_atomic_state *state) 2172 { 2173 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2174 const struct intel_cdclk_state *old_cdclk_state = 2175 intel_atomic_get_old_cdclk_state(state); 2176 const struct intel_cdclk_state *new_cdclk_state = 2177 intel_atomic_get_new_cdclk_state(state); 2178 enum pipe pipe = new_cdclk_state->pipe; 2179 2180 if (!intel_cdclk_changed(&old_cdclk_state->actual, 2181 &new_cdclk_state->actual)) 2182 return; 2183 2184 if (pipe != INVALID_PIPE && 2185 old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) { 2186 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed); 2187 2188 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe); 2189 } 2190 } 2191 2192 static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state) 2193 { 2194 struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); 2195 int pixel_rate = crtc_state->pixel_rate; 2196 2197 if (DISPLAY_VER(dev_priv) >= 10) 2198 return DIV_ROUND_UP(pixel_rate, 2); 2199 else if (DISPLAY_VER(dev_priv) == 9 || 2200 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) 2201 return pixel_rate; 2202 else if (IS_CHERRYVIEW(dev_priv)) 2203 return DIV_ROUND_UP(pixel_rate * 100, 95); 2204 else if (crtc_state->double_wide) 2205 return DIV_ROUND_UP(pixel_rate * 100, 90 * 2); 2206 else 2207 return DIV_ROUND_UP(pixel_rate * 100, 90); 2208 } 2209 2210 static int intel_planes_min_cdclk(const struct intel_crtc_state *crtc_state) 2211 { 2212 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 2213 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); 2214 struct intel_plane *plane; 2215 int min_cdclk = 0; 2216 2217 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) 2218 min_cdclk = max(crtc_state->min_cdclk[plane->id], min_cdclk); 2219 2220 return min_cdclk; 2221 } 2222 2223 int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state) 2224 { 2225 struct drm_i915_private *dev_priv = 2226 to_i915(crtc_state->uapi.crtc->dev); 2227 int min_cdclk; 2228 2229 if (!crtc_state->hw.enable) 2230 return 0; 2231 2232 min_cdclk = intel_pixel_rate_to_cdclk(crtc_state); 2233 2234 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ 2235 if (IS_BROADWELL(dev_priv) && hsw_crtc_state_ips_capable(crtc_state)) 2236 min_cdclk = DIV_ROUND_UP(min_cdclk * 100, 95); 2237 2238 /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz, 2239 * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else 2240 * there may be audio corruption or screen corruption." This cdclk 2241 * restriction for GLK is 316.8 MHz. 2242 */ 2243 if (intel_crtc_has_dp_encoder(crtc_state) && 2244 crtc_state->has_audio && 2245 crtc_state->port_clock >= 540000 && 2246 crtc_state->lane_count == 4) { 2247 if (DISPLAY_VER(dev_priv) == 10) { 2248 /* Display WA #1145: glk */ 2249 min_cdclk = max(316800, min_cdclk); 2250 } else if (DISPLAY_VER(dev_priv) == 9 || IS_BROADWELL(dev_priv)) { 2251 /* Display WA #1144: skl,bxt */ 2252 min_cdclk = max(432000, min_cdclk); 2253 } 2254 } 2255 2256 /* 2257 * According to BSpec, "The CD clock frequency must be at least twice 2258 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default. 2259 */ 2260 if (crtc_state->has_audio && DISPLAY_VER(dev_priv) >= 9) 2261 min_cdclk = max(2 * 96000, min_cdclk); 2262 2263 /* 2264 * "For DP audio configuration, cdclk frequency shall be set to 2265 * meet the following requirements: 2266 * DP Link Frequency(MHz) | Cdclk frequency(MHz) 2267 * 270 | 320 or higher 2268 * 162 | 200 or higher" 2269 */ 2270 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && 2271 intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio) 2272 min_cdclk = max(crtc_state->port_clock, min_cdclk); 2273 2274 /* 2275 * On Valleyview some DSI panels lose (v|h)sync when the clock is lower 2276 * than 320000KHz. 2277 */ 2278 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) && 2279 IS_VALLEYVIEW(dev_priv)) 2280 min_cdclk = max(320000, min_cdclk); 2281 2282 /* 2283 * On Geminilake once the CDCLK gets as low as 79200 2284 * picture gets unstable, despite that values are 2285 * correct for DSI PLL and DE PLL. 2286 */ 2287 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) && 2288 IS_GEMINILAKE(dev_priv)) 2289 min_cdclk = max(158400, min_cdclk); 2290 2291 /* Account for additional needs from the planes */ 2292 min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk); 2293 2294 /* 2295 * When we decide to use only one VDSC engine, since 2296 * each VDSC operates with 1 ppc throughput, pixel clock 2297 * cannot be higher than the VDSC clock (cdclk) 2298 */ 2299 if (crtc_state->dsc.compression_enable && !crtc_state->dsc.dsc_split) 2300 min_cdclk = max(min_cdclk, (int)crtc_state->pixel_rate); 2301 2302 /* 2303 * HACK. Currently for TGL platforms we calculate 2304 * min_cdclk initially based on pixel_rate divided 2305 * by 2, accounting for also plane requirements, 2306 * however in some cases the lowest possible CDCLK 2307 * doesn't work and causing the underruns. 2308 * Explicitly stating here that this seems to be currently 2309 * rather a Hack, than final solution. 2310 */ 2311 if (IS_TIGERLAKE(dev_priv)) { 2312 /* 2313 * Clamp to max_cdclk_freq in case pixel rate is higher, 2314 * in order not to break an 8K, but still leave W/A at place. 2315 */ 2316 min_cdclk = max_t(int, min_cdclk, 2317 min_t(int, crtc_state->pixel_rate, 2318 dev_priv->max_cdclk_freq)); 2319 } 2320 2321 return min_cdclk; 2322 } 2323 2324 static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state) 2325 { 2326 struct intel_atomic_state *state = cdclk_state->base.state; 2327 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2328 const struct intel_bw_state *bw_state; 2329 struct intel_crtc *crtc; 2330 struct intel_crtc_state *crtc_state; 2331 int min_cdclk, i; 2332 enum pipe pipe; 2333 2334 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { 2335 int ret; 2336 2337 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state); 2338 if (min_cdclk < 0) 2339 return min_cdclk; 2340 2341 if (cdclk_state->min_cdclk[crtc->pipe] == min_cdclk) 2342 continue; 2343 2344 cdclk_state->min_cdclk[crtc->pipe] = min_cdclk; 2345 2346 ret = intel_atomic_lock_global_state(&cdclk_state->base); 2347 if (ret) 2348 return ret; 2349 } 2350 2351 bw_state = intel_atomic_get_new_bw_state(state); 2352 if (bw_state) { 2353 min_cdclk = intel_bw_min_cdclk(dev_priv, bw_state); 2354 2355 if (cdclk_state->bw_min_cdclk != min_cdclk) { 2356 int ret; 2357 2358 cdclk_state->bw_min_cdclk = min_cdclk; 2359 2360 ret = intel_atomic_lock_global_state(&cdclk_state->base); 2361 if (ret) 2362 return ret; 2363 } 2364 } 2365 2366 min_cdclk = max(cdclk_state->force_min_cdclk, 2367 cdclk_state->bw_min_cdclk); 2368 for_each_pipe(dev_priv, pipe) 2369 min_cdclk = max(cdclk_state->min_cdclk[pipe], min_cdclk); 2370 2371 if (min_cdclk > dev_priv->max_cdclk_freq) { 2372 drm_dbg_kms(&dev_priv->drm, 2373 "required cdclk (%d kHz) exceeds max (%d kHz)\n", 2374 min_cdclk, dev_priv->max_cdclk_freq); 2375 return -EINVAL; 2376 } 2377 2378 return min_cdclk; 2379 } 2380 2381 /* 2382 * Account for port clock min voltage level requirements. 2383 * This only really does something on DISPLA_VER >= 11 but can be 2384 * called on earlier platforms as well. 2385 * 2386 * Note that this functions assumes that 0 is 2387 * the lowest voltage value, and higher values 2388 * correspond to increasingly higher voltages. 2389 * 2390 * Should that relationship no longer hold on 2391 * future platforms this code will need to be 2392 * adjusted. 2393 */ 2394 static int bxt_compute_min_voltage_level(struct intel_cdclk_state *cdclk_state) 2395 { 2396 struct intel_atomic_state *state = cdclk_state->base.state; 2397 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2398 struct intel_crtc *crtc; 2399 struct intel_crtc_state *crtc_state; 2400 u8 min_voltage_level; 2401 int i; 2402 enum pipe pipe; 2403 2404 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { 2405 int ret; 2406 2407 if (crtc_state->hw.enable) 2408 min_voltage_level = crtc_state->min_voltage_level; 2409 else 2410 min_voltage_level = 0; 2411 2412 if (cdclk_state->min_voltage_level[crtc->pipe] == min_voltage_level) 2413 continue; 2414 2415 cdclk_state->min_voltage_level[crtc->pipe] = min_voltage_level; 2416 2417 ret = intel_atomic_lock_global_state(&cdclk_state->base); 2418 if (ret) 2419 return ret; 2420 } 2421 2422 min_voltage_level = 0; 2423 for_each_pipe(dev_priv, pipe) 2424 min_voltage_level = max(cdclk_state->min_voltage_level[pipe], 2425 min_voltage_level); 2426 2427 return min_voltage_level; 2428 } 2429 2430 static int vlv_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2431 { 2432 struct intel_atomic_state *state = cdclk_state->base.state; 2433 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2434 int min_cdclk, cdclk; 2435 2436 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2437 if (min_cdclk < 0) 2438 return min_cdclk; 2439 2440 cdclk = vlv_calc_cdclk(dev_priv, min_cdclk); 2441 2442 cdclk_state->logical.cdclk = cdclk; 2443 cdclk_state->logical.voltage_level = 2444 vlv_calc_voltage_level(dev_priv, cdclk); 2445 2446 if (!cdclk_state->active_pipes) { 2447 cdclk = vlv_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk); 2448 2449 cdclk_state->actual.cdclk = cdclk; 2450 cdclk_state->actual.voltage_level = 2451 vlv_calc_voltage_level(dev_priv, cdclk); 2452 } else { 2453 cdclk_state->actual = cdclk_state->logical; 2454 } 2455 2456 return 0; 2457 } 2458 2459 static int bdw_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2460 { 2461 int min_cdclk, cdclk; 2462 2463 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2464 if (min_cdclk < 0) 2465 return min_cdclk; 2466 2467 /* 2468 * FIXME should also account for plane ratio 2469 * once 64bpp pixel formats are supported. 2470 */ 2471 cdclk = bdw_calc_cdclk(min_cdclk); 2472 2473 cdclk_state->logical.cdclk = cdclk; 2474 cdclk_state->logical.voltage_level = 2475 bdw_calc_voltage_level(cdclk); 2476 2477 if (!cdclk_state->active_pipes) { 2478 cdclk = bdw_calc_cdclk(cdclk_state->force_min_cdclk); 2479 2480 cdclk_state->actual.cdclk = cdclk; 2481 cdclk_state->actual.voltage_level = 2482 bdw_calc_voltage_level(cdclk); 2483 } else { 2484 cdclk_state->actual = cdclk_state->logical; 2485 } 2486 2487 return 0; 2488 } 2489 2490 static int skl_dpll0_vco(struct intel_cdclk_state *cdclk_state) 2491 { 2492 struct intel_atomic_state *state = cdclk_state->base.state; 2493 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2494 struct intel_crtc *crtc; 2495 struct intel_crtc_state *crtc_state; 2496 int vco, i; 2497 2498 vco = cdclk_state->logical.vco; 2499 if (!vco) 2500 vco = dev_priv->skl_preferred_vco_freq; 2501 2502 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { 2503 if (!crtc_state->hw.enable) 2504 continue; 2505 2506 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) 2507 continue; 2508 2509 /* 2510 * DPLL0 VCO may need to be adjusted to get the correct 2511 * clock for eDP. This will affect cdclk as well. 2512 */ 2513 switch (crtc_state->port_clock / 2) { 2514 case 108000: 2515 case 216000: 2516 vco = 8640000; 2517 break; 2518 default: 2519 vco = 8100000; 2520 break; 2521 } 2522 } 2523 2524 return vco; 2525 } 2526 2527 static int skl_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2528 { 2529 int min_cdclk, cdclk, vco; 2530 2531 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2532 if (min_cdclk < 0) 2533 return min_cdclk; 2534 2535 vco = skl_dpll0_vco(cdclk_state); 2536 2537 /* 2538 * FIXME should also account for plane ratio 2539 * once 64bpp pixel formats are supported. 2540 */ 2541 cdclk = skl_calc_cdclk(min_cdclk, vco); 2542 2543 cdclk_state->logical.vco = vco; 2544 cdclk_state->logical.cdclk = cdclk; 2545 cdclk_state->logical.voltage_level = 2546 skl_calc_voltage_level(cdclk); 2547 2548 if (!cdclk_state->active_pipes) { 2549 cdclk = skl_calc_cdclk(cdclk_state->force_min_cdclk, vco); 2550 2551 cdclk_state->actual.vco = vco; 2552 cdclk_state->actual.cdclk = cdclk; 2553 cdclk_state->actual.voltage_level = 2554 skl_calc_voltage_level(cdclk); 2555 } else { 2556 cdclk_state->actual = cdclk_state->logical; 2557 } 2558 2559 return 0; 2560 } 2561 2562 static int bxt_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2563 { 2564 struct intel_atomic_state *state = cdclk_state->base.state; 2565 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2566 int min_cdclk, min_voltage_level, cdclk, vco; 2567 2568 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2569 if (min_cdclk < 0) 2570 return min_cdclk; 2571 2572 min_voltage_level = bxt_compute_min_voltage_level(cdclk_state); 2573 if (min_voltage_level < 0) 2574 return min_voltage_level; 2575 2576 cdclk = bxt_calc_cdclk(dev_priv, min_cdclk); 2577 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk); 2578 2579 cdclk_state->logical.vco = vco; 2580 cdclk_state->logical.cdclk = cdclk; 2581 cdclk_state->logical.voltage_level = 2582 max_t(int, min_voltage_level, 2583 intel_cdclk_calc_voltage_level(dev_priv, cdclk)); 2584 2585 if (!cdclk_state->active_pipes) { 2586 cdclk = bxt_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk); 2587 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk); 2588 2589 cdclk_state->actual.vco = vco; 2590 cdclk_state->actual.cdclk = cdclk; 2591 cdclk_state->actual.voltage_level = 2592 intel_cdclk_calc_voltage_level(dev_priv, cdclk); 2593 } else { 2594 cdclk_state->actual = cdclk_state->logical; 2595 } 2596 2597 return 0; 2598 } 2599 2600 static int fixed_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state) 2601 { 2602 int min_cdclk; 2603 2604 /* 2605 * We can't change the cdclk frequency, but we still want to 2606 * check that the required minimum frequency doesn't exceed 2607 * the actual cdclk frequency. 2608 */ 2609 min_cdclk = intel_compute_min_cdclk(cdclk_state); 2610 if (min_cdclk < 0) 2611 return min_cdclk; 2612 2613 return 0; 2614 } 2615 2616 static struct intel_global_state *intel_cdclk_duplicate_state(struct intel_global_obj *obj) 2617 { 2618 struct intel_cdclk_state *cdclk_state; 2619 2620 cdclk_state = kmemdup(obj->state, sizeof(*cdclk_state), GFP_KERNEL); 2621 if (!cdclk_state) 2622 return NULL; 2623 2624 cdclk_state->pipe = INVALID_PIPE; 2625 2626 return &cdclk_state->base; 2627 } 2628 2629 static void intel_cdclk_destroy_state(struct intel_global_obj *obj, 2630 struct intel_global_state *state) 2631 { 2632 kfree(state); 2633 } 2634 2635 static const struct intel_global_state_funcs intel_cdclk_funcs = { 2636 .atomic_duplicate_state = intel_cdclk_duplicate_state, 2637 .atomic_destroy_state = intel_cdclk_destroy_state, 2638 }; 2639 2640 struct intel_cdclk_state * 2641 intel_atomic_get_cdclk_state(struct intel_atomic_state *state) 2642 { 2643 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2644 struct intel_global_state *cdclk_state; 2645 2646 cdclk_state = intel_atomic_get_global_obj_state(state, &dev_priv->cdclk.obj); 2647 if (IS_ERR(cdclk_state)) 2648 return ERR_CAST(cdclk_state); 2649 2650 return to_intel_cdclk_state(cdclk_state); 2651 } 2652 2653 int intel_cdclk_atomic_check(struct intel_atomic_state *state, 2654 bool *need_cdclk_calc) 2655 { 2656 const struct intel_cdclk_state *old_cdclk_state; 2657 const struct intel_cdclk_state *new_cdclk_state; 2658 struct intel_plane_state *plane_state; 2659 struct intel_plane *plane; 2660 int ret; 2661 int i; 2662 2663 /* 2664 * active_planes bitmask has been updated, and potentially affected 2665 * planes are part of the state. We can now compute the minimum cdclk 2666 * for each plane. 2667 */ 2668 for_each_new_intel_plane_in_state(state, plane, plane_state, i) { 2669 ret = intel_plane_calc_min_cdclk(state, plane, need_cdclk_calc); 2670 if (ret) 2671 return ret; 2672 } 2673 2674 ret = intel_bw_calc_min_cdclk(state, need_cdclk_calc); 2675 if (ret) 2676 return ret; 2677 2678 old_cdclk_state = intel_atomic_get_old_cdclk_state(state); 2679 new_cdclk_state = intel_atomic_get_new_cdclk_state(state); 2680 2681 if (new_cdclk_state && 2682 old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk) 2683 *need_cdclk_calc = true; 2684 2685 return 0; 2686 } 2687 2688 int intel_cdclk_init(struct drm_i915_private *dev_priv) 2689 { 2690 struct intel_cdclk_state *cdclk_state; 2691 2692 cdclk_state = kzalloc(sizeof(*cdclk_state), GFP_KERNEL); 2693 if (!cdclk_state) 2694 return -ENOMEM; 2695 2696 intel_atomic_global_obj_init(dev_priv, &dev_priv->cdclk.obj, 2697 &cdclk_state->base, &intel_cdclk_funcs); 2698 2699 return 0; 2700 } 2701 2702 int intel_modeset_calc_cdclk(struct intel_atomic_state *state) 2703 { 2704 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 2705 const struct intel_cdclk_state *old_cdclk_state; 2706 struct intel_cdclk_state *new_cdclk_state; 2707 enum pipe pipe = INVALID_PIPE; 2708 int ret; 2709 2710 new_cdclk_state = intel_atomic_get_cdclk_state(state); 2711 if (IS_ERR(new_cdclk_state)) 2712 return PTR_ERR(new_cdclk_state); 2713 2714 old_cdclk_state = intel_atomic_get_old_cdclk_state(state); 2715 2716 new_cdclk_state->active_pipes = 2717 intel_calc_active_pipes(state, old_cdclk_state->active_pipes); 2718 2719 ret = intel_cdclk_modeset_calc_cdclk(dev_priv, new_cdclk_state); 2720 if (ret) 2721 return ret; 2722 2723 if (intel_cdclk_changed(&old_cdclk_state->actual, 2724 &new_cdclk_state->actual)) { 2725 /* 2726 * Also serialize commits across all crtcs 2727 * if the actual hw needs to be poked. 2728 */ 2729 ret = intel_atomic_serialize_global_state(&new_cdclk_state->base); 2730 if (ret) 2731 return ret; 2732 } else if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes || 2733 old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk || 2734 intel_cdclk_changed(&old_cdclk_state->logical, 2735 &new_cdclk_state->logical)) { 2736 ret = intel_atomic_lock_global_state(&new_cdclk_state->base); 2737 if (ret) 2738 return ret; 2739 } else { 2740 return 0; 2741 } 2742 2743 if (is_power_of_2(new_cdclk_state->active_pipes) && 2744 intel_cdclk_can_cd2x_update(dev_priv, 2745 &old_cdclk_state->actual, 2746 &new_cdclk_state->actual)) { 2747 struct intel_crtc *crtc; 2748 struct intel_crtc_state *crtc_state; 2749 2750 pipe = ilog2(new_cdclk_state->active_pipes); 2751 crtc = intel_crtc_for_pipe(dev_priv, pipe); 2752 2753 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); 2754 if (IS_ERR(crtc_state)) 2755 return PTR_ERR(crtc_state); 2756 2757 if (drm_atomic_crtc_needs_modeset(&crtc_state->uapi)) 2758 pipe = INVALID_PIPE; 2759 } 2760 2761 if (intel_cdclk_can_squash(dev_priv, 2762 &old_cdclk_state->actual, 2763 &new_cdclk_state->actual)) { 2764 drm_dbg_kms(&dev_priv->drm, 2765 "Can change cdclk via squasher\n"); 2766 } else if (intel_cdclk_can_crawl(dev_priv, 2767 &old_cdclk_state->actual, 2768 &new_cdclk_state->actual)) { 2769 drm_dbg_kms(&dev_priv->drm, 2770 "Can change cdclk via crawl\n"); 2771 } else if (pipe != INVALID_PIPE) { 2772 new_cdclk_state->pipe = pipe; 2773 2774 drm_dbg_kms(&dev_priv->drm, 2775 "Can change cdclk cd2x divider with pipe %c active\n", 2776 pipe_name(pipe)); 2777 } else if (intel_cdclk_needs_modeset(&old_cdclk_state->actual, 2778 &new_cdclk_state->actual)) { 2779 /* All pipes must be switched off while we change the cdclk. */ 2780 ret = intel_modeset_all_pipes(state); 2781 if (ret) 2782 return ret; 2783 2784 drm_dbg_kms(&dev_priv->drm, 2785 "Modeset required for cdclk change\n"); 2786 } 2787 2788 drm_dbg_kms(&dev_priv->drm, 2789 "New cdclk calculated to be logical %u kHz, actual %u kHz\n", 2790 new_cdclk_state->logical.cdclk, 2791 new_cdclk_state->actual.cdclk); 2792 drm_dbg_kms(&dev_priv->drm, 2793 "New voltage level calculated to be logical %u, actual %u\n", 2794 new_cdclk_state->logical.voltage_level, 2795 new_cdclk_state->actual.voltage_level); 2796 2797 return 0; 2798 } 2799 2800 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv) 2801 { 2802 int max_cdclk_freq = dev_priv->max_cdclk_freq; 2803 2804 if (DISPLAY_VER(dev_priv) >= 10) 2805 return 2 * max_cdclk_freq; 2806 else if (DISPLAY_VER(dev_priv) == 9 || 2807 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) 2808 return max_cdclk_freq; 2809 else if (IS_CHERRYVIEW(dev_priv)) 2810 return max_cdclk_freq*95/100; 2811 else if (DISPLAY_VER(dev_priv) < 4) 2812 return 2*max_cdclk_freq*90/100; 2813 else 2814 return max_cdclk_freq*90/100; 2815 } 2816 2817 /** 2818 * intel_update_max_cdclk - Determine the maximum support CDCLK frequency 2819 * @dev_priv: i915 device 2820 * 2821 * Determine the maximum CDCLK frequency the platform supports, and also 2822 * derive the maximum dot clock frequency the maximum CDCLK frequency 2823 * allows. 2824 */ 2825 void intel_update_max_cdclk(struct drm_i915_private *dev_priv) 2826 { 2827 if (IS_JSL_EHL(dev_priv)) { 2828 if (dev_priv->cdclk.hw.ref == 24000) 2829 dev_priv->max_cdclk_freq = 552000; 2830 else 2831 dev_priv->max_cdclk_freq = 556800; 2832 } else if (DISPLAY_VER(dev_priv) >= 11) { 2833 if (dev_priv->cdclk.hw.ref == 24000) 2834 dev_priv->max_cdclk_freq = 648000; 2835 else 2836 dev_priv->max_cdclk_freq = 652800; 2837 } else if (IS_GEMINILAKE(dev_priv)) { 2838 dev_priv->max_cdclk_freq = 316800; 2839 } else if (IS_BROXTON(dev_priv)) { 2840 dev_priv->max_cdclk_freq = 624000; 2841 } else if (DISPLAY_VER(dev_priv) == 9) { 2842 u32 limit = intel_de_read(dev_priv, SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK; 2843 int max_cdclk, vco; 2844 2845 vco = dev_priv->skl_preferred_vco_freq; 2846 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000); 2847 2848 /* 2849 * Use the lower (vco 8640) cdclk values as a 2850 * first guess. skl_calc_cdclk() will correct it 2851 * if the preferred vco is 8100 instead. 2852 */ 2853 if (limit == SKL_DFSM_CDCLK_LIMIT_675) 2854 max_cdclk = 617143; 2855 else if (limit == SKL_DFSM_CDCLK_LIMIT_540) 2856 max_cdclk = 540000; 2857 else if (limit == SKL_DFSM_CDCLK_LIMIT_450) 2858 max_cdclk = 432000; 2859 else 2860 max_cdclk = 308571; 2861 2862 dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco); 2863 } else if (IS_BROADWELL(dev_priv)) { 2864 /* 2865 * FIXME with extra cooling we can allow 2866 * 540 MHz for ULX and 675 Mhz for ULT. 2867 * How can we know if extra cooling is 2868 * available? PCI ID, VTB, something else? 2869 */ 2870 if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT) 2871 dev_priv->max_cdclk_freq = 450000; 2872 else if (IS_BDW_ULX(dev_priv)) 2873 dev_priv->max_cdclk_freq = 450000; 2874 else if (IS_BDW_ULT(dev_priv)) 2875 dev_priv->max_cdclk_freq = 540000; 2876 else 2877 dev_priv->max_cdclk_freq = 675000; 2878 } else if (IS_CHERRYVIEW(dev_priv)) { 2879 dev_priv->max_cdclk_freq = 320000; 2880 } else if (IS_VALLEYVIEW(dev_priv)) { 2881 dev_priv->max_cdclk_freq = 400000; 2882 } else { 2883 /* otherwise assume cdclk is fixed */ 2884 dev_priv->max_cdclk_freq = dev_priv->cdclk.hw.cdclk; 2885 } 2886 2887 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv); 2888 2889 drm_dbg(&dev_priv->drm, "Max CD clock rate: %d kHz\n", 2890 dev_priv->max_cdclk_freq); 2891 2892 drm_dbg(&dev_priv->drm, "Max dotclock rate: %d kHz\n", 2893 dev_priv->max_dotclk_freq); 2894 } 2895 2896 /** 2897 * intel_update_cdclk - Determine the current CDCLK frequency 2898 * @dev_priv: i915 device 2899 * 2900 * Determine the current CDCLK frequency. 2901 */ 2902 void intel_update_cdclk(struct drm_i915_private *dev_priv) 2903 { 2904 intel_cdclk_get_cdclk(dev_priv, &dev_priv->cdclk.hw); 2905 2906 /* 2907 * 9:0 CMBUS [sic] CDCLK frequency (cdfreq): 2908 * Programmng [sic] note: bit[9:2] should be programmed to the number 2909 * of cdclk that generates 4MHz reference clock freq which is used to 2910 * generate GMBus clock. This will vary with the cdclk freq. 2911 */ 2912 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) 2913 intel_de_write(dev_priv, GMBUSFREQ_VLV, 2914 DIV_ROUND_UP(dev_priv->cdclk.hw.cdclk, 1000)); 2915 } 2916 2917 static int dg1_rawclk(struct drm_i915_private *dev_priv) 2918 { 2919 /* 2920 * DG1 always uses a 38.4 MHz rawclk. The bspec tells us 2921 * "Program Numerator=2, Denominator=4, Divider=37 decimal." 2922 */ 2923 intel_de_write(dev_priv, PCH_RAWCLK_FREQ, 2924 CNP_RAWCLK_DEN(4) | CNP_RAWCLK_DIV(37) | ICP_RAWCLK_NUM(2)); 2925 2926 return 38400; 2927 } 2928 2929 static int cnp_rawclk(struct drm_i915_private *dev_priv) 2930 { 2931 u32 rawclk; 2932 int divider, fraction; 2933 2934 if (intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) { 2935 /* 24 MHz */ 2936 divider = 24000; 2937 fraction = 0; 2938 } else { 2939 /* 19.2 MHz */ 2940 divider = 19000; 2941 fraction = 200; 2942 } 2943 2944 rawclk = CNP_RAWCLK_DIV(divider / 1000); 2945 if (fraction) { 2946 int numerator = 1; 2947 2948 rawclk |= CNP_RAWCLK_DEN(DIV_ROUND_CLOSEST(numerator * 1000, 2949 fraction) - 1); 2950 if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) 2951 rawclk |= ICP_RAWCLK_NUM(numerator); 2952 } 2953 2954 intel_de_write(dev_priv, PCH_RAWCLK_FREQ, rawclk); 2955 return divider + fraction; 2956 } 2957 2958 static int pch_rawclk(struct drm_i915_private *dev_priv) 2959 { 2960 return (intel_de_read(dev_priv, PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000; 2961 } 2962 2963 static int vlv_hrawclk(struct drm_i915_private *dev_priv) 2964 { 2965 /* RAWCLK_FREQ_VLV register updated from power well code */ 2966 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk", 2967 CCK_DISPLAY_REF_CLOCK_CONTROL); 2968 } 2969 2970 static int i9xx_hrawclk(struct drm_i915_private *dev_priv) 2971 { 2972 u32 clkcfg; 2973 2974 /* 2975 * hrawclock is 1/4 the FSB frequency 2976 * 2977 * Note that this only reads the state of the FSB 2978 * straps, not the actual FSB frequency. Some BIOSen 2979 * let you configure each independently. Ideally we'd 2980 * read out the actual FSB frequency but sadly we 2981 * don't know which registers have that information, 2982 * and all the relevant docs have gone to bit heaven :( 2983 */ 2984 clkcfg = intel_de_read(dev_priv, CLKCFG) & CLKCFG_FSB_MASK; 2985 2986 if (IS_MOBILE(dev_priv)) { 2987 switch (clkcfg) { 2988 case CLKCFG_FSB_400: 2989 return 100000; 2990 case CLKCFG_FSB_533: 2991 return 133333; 2992 case CLKCFG_FSB_667: 2993 return 166667; 2994 case CLKCFG_FSB_800: 2995 return 200000; 2996 case CLKCFG_FSB_1067: 2997 return 266667; 2998 case CLKCFG_FSB_1333: 2999 return 333333; 3000 default: 3001 MISSING_CASE(clkcfg); 3002 return 133333; 3003 } 3004 } else { 3005 switch (clkcfg) { 3006 case CLKCFG_FSB_400_ALT: 3007 return 100000; 3008 case CLKCFG_FSB_533: 3009 return 133333; 3010 case CLKCFG_FSB_667: 3011 return 166667; 3012 case CLKCFG_FSB_800: 3013 return 200000; 3014 case CLKCFG_FSB_1067_ALT: 3015 return 266667; 3016 case CLKCFG_FSB_1333_ALT: 3017 return 333333; 3018 case CLKCFG_FSB_1600_ALT: 3019 return 400000; 3020 default: 3021 return 133333; 3022 } 3023 } 3024 } 3025 3026 /** 3027 * intel_read_rawclk - Determine the current RAWCLK frequency 3028 * @dev_priv: i915 device 3029 * 3030 * Determine the current RAWCLK frequency. RAWCLK is a fixed 3031 * frequency clock so this needs to done only once. 3032 */ 3033 u32 intel_read_rawclk(struct drm_i915_private *dev_priv) 3034 { 3035 u32 freq; 3036 3037 if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1) 3038 freq = dg1_rawclk(dev_priv); 3039 else if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP) 3040 freq = cnp_rawclk(dev_priv); 3041 else if (HAS_PCH_SPLIT(dev_priv)) 3042 freq = pch_rawclk(dev_priv); 3043 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) 3044 freq = vlv_hrawclk(dev_priv); 3045 else if (DISPLAY_VER(dev_priv) >= 3) 3046 freq = i9xx_hrawclk(dev_priv); 3047 else 3048 /* no rawclk on other platforms, or no need to know it */ 3049 return 0; 3050 3051 return freq; 3052 } 3053 3054 static const struct intel_cdclk_funcs tgl_cdclk_funcs = { 3055 .get_cdclk = bxt_get_cdclk, 3056 .set_cdclk = bxt_set_cdclk, 3057 .modeset_calc_cdclk = bxt_modeset_calc_cdclk, 3058 .calc_voltage_level = tgl_calc_voltage_level, 3059 }; 3060 3061 static const struct intel_cdclk_funcs ehl_cdclk_funcs = { 3062 .get_cdclk = bxt_get_cdclk, 3063 .set_cdclk = bxt_set_cdclk, 3064 .modeset_calc_cdclk = bxt_modeset_calc_cdclk, 3065 .calc_voltage_level = ehl_calc_voltage_level, 3066 }; 3067 3068 static const struct intel_cdclk_funcs icl_cdclk_funcs = { 3069 .get_cdclk = bxt_get_cdclk, 3070 .set_cdclk = bxt_set_cdclk, 3071 .modeset_calc_cdclk = bxt_modeset_calc_cdclk, 3072 .calc_voltage_level = icl_calc_voltage_level, 3073 }; 3074 3075 static const struct intel_cdclk_funcs bxt_cdclk_funcs = { 3076 .get_cdclk = bxt_get_cdclk, 3077 .set_cdclk = bxt_set_cdclk, 3078 .modeset_calc_cdclk = bxt_modeset_calc_cdclk, 3079 .calc_voltage_level = bxt_calc_voltage_level, 3080 }; 3081 3082 static const struct intel_cdclk_funcs skl_cdclk_funcs = { 3083 .get_cdclk = skl_get_cdclk, 3084 .set_cdclk = skl_set_cdclk, 3085 .modeset_calc_cdclk = skl_modeset_calc_cdclk, 3086 }; 3087 3088 static const struct intel_cdclk_funcs bdw_cdclk_funcs = { 3089 .get_cdclk = bdw_get_cdclk, 3090 .set_cdclk = bdw_set_cdclk, 3091 .modeset_calc_cdclk = bdw_modeset_calc_cdclk, 3092 }; 3093 3094 static const struct intel_cdclk_funcs chv_cdclk_funcs = { 3095 .get_cdclk = vlv_get_cdclk, 3096 .set_cdclk = chv_set_cdclk, 3097 .modeset_calc_cdclk = vlv_modeset_calc_cdclk, 3098 }; 3099 3100 static const struct intel_cdclk_funcs vlv_cdclk_funcs = { 3101 .get_cdclk = vlv_get_cdclk, 3102 .set_cdclk = vlv_set_cdclk, 3103 .modeset_calc_cdclk = vlv_modeset_calc_cdclk, 3104 }; 3105 3106 static const struct intel_cdclk_funcs hsw_cdclk_funcs = { 3107 .get_cdclk = hsw_get_cdclk, 3108 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3109 }; 3110 3111 /* SNB, IVB, 965G, 945G */ 3112 static const struct intel_cdclk_funcs fixed_400mhz_cdclk_funcs = { 3113 .get_cdclk = fixed_400mhz_get_cdclk, 3114 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3115 }; 3116 3117 static const struct intel_cdclk_funcs ilk_cdclk_funcs = { 3118 .get_cdclk = fixed_450mhz_get_cdclk, 3119 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3120 }; 3121 3122 static const struct intel_cdclk_funcs gm45_cdclk_funcs = { 3123 .get_cdclk = gm45_get_cdclk, 3124 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3125 }; 3126 3127 /* G45 uses G33 */ 3128 3129 static const struct intel_cdclk_funcs i965gm_cdclk_funcs = { 3130 .get_cdclk = i965gm_get_cdclk, 3131 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3132 }; 3133 3134 /* i965G uses fixed 400 */ 3135 3136 static const struct intel_cdclk_funcs pnv_cdclk_funcs = { 3137 .get_cdclk = pnv_get_cdclk, 3138 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3139 }; 3140 3141 static const struct intel_cdclk_funcs g33_cdclk_funcs = { 3142 .get_cdclk = g33_get_cdclk, 3143 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3144 }; 3145 3146 static const struct intel_cdclk_funcs i945gm_cdclk_funcs = { 3147 .get_cdclk = i945gm_get_cdclk, 3148 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3149 }; 3150 3151 /* i945G uses fixed 400 */ 3152 3153 static const struct intel_cdclk_funcs i915gm_cdclk_funcs = { 3154 .get_cdclk = i915gm_get_cdclk, 3155 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3156 }; 3157 3158 static const struct intel_cdclk_funcs i915g_cdclk_funcs = { 3159 .get_cdclk = fixed_333mhz_get_cdclk, 3160 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3161 }; 3162 3163 static const struct intel_cdclk_funcs i865g_cdclk_funcs = { 3164 .get_cdclk = fixed_266mhz_get_cdclk, 3165 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3166 }; 3167 3168 static const struct intel_cdclk_funcs i85x_cdclk_funcs = { 3169 .get_cdclk = i85x_get_cdclk, 3170 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3171 }; 3172 3173 static const struct intel_cdclk_funcs i845g_cdclk_funcs = { 3174 .get_cdclk = fixed_200mhz_get_cdclk, 3175 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3176 }; 3177 3178 static const struct intel_cdclk_funcs i830_cdclk_funcs = { 3179 .get_cdclk = fixed_133mhz_get_cdclk, 3180 .modeset_calc_cdclk = fixed_modeset_calc_cdclk, 3181 }; 3182 3183 /** 3184 * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks 3185 * @dev_priv: i915 device 3186 */ 3187 void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv) 3188 { 3189 if (IS_DG2(dev_priv)) { 3190 dev_priv->cdclk_funcs = &tgl_cdclk_funcs; 3191 dev_priv->cdclk.table = dg2_cdclk_table; 3192 } else if (IS_ALDERLAKE_P(dev_priv)) { 3193 dev_priv->cdclk_funcs = &tgl_cdclk_funcs; 3194 /* Wa_22011320316:adl-p[a0] */ 3195 if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) 3196 dev_priv->cdclk.table = adlp_a_step_cdclk_table; 3197 else 3198 dev_priv->cdclk.table = adlp_cdclk_table; 3199 } else if (IS_ROCKETLAKE(dev_priv)) { 3200 dev_priv->cdclk_funcs = &tgl_cdclk_funcs; 3201 dev_priv->cdclk.table = rkl_cdclk_table; 3202 } else if (DISPLAY_VER(dev_priv) >= 12) { 3203 dev_priv->cdclk_funcs = &tgl_cdclk_funcs; 3204 dev_priv->cdclk.table = icl_cdclk_table; 3205 } else if (IS_JSL_EHL(dev_priv)) { 3206 dev_priv->cdclk_funcs = &ehl_cdclk_funcs; 3207 dev_priv->cdclk.table = icl_cdclk_table; 3208 } else if (DISPLAY_VER(dev_priv) >= 11) { 3209 dev_priv->cdclk_funcs = &icl_cdclk_funcs; 3210 dev_priv->cdclk.table = icl_cdclk_table; 3211 } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { 3212 dev_priv->cdclk_funcs = &bxt_cdclk_funcs; 3213 if (IS_GEMINILAKE(dev_priv)) 3214 dev_priv->cdclk.table = glk_cdclk_table; 3215 else 3216 dev_priv->cdclk.table = bxt_cdclk_table; 3217 } else if (DISPLAY_VER(dev_priv) == 9) { 3218 dev_priv->cdclk_funcs = &skl_cdclk_funcs; 3219 } else if (IS_BROADWELL(dev_priv)) { 3220 dev_priv->cdclk_funcs = &bdw_cdclk_funcs; 3221 } else if (IS_HASWELL(dev_priv)) { 3222 dev_priv->cdclk_funcs = &hsw_cdclk_funcs; 3223 } else if (IS_CHERRYVIEW(dev_priv)) { 3224 dev_priv->cdclk_funcs = &chv_cdclk_funcs; 3225 } else if (IS_VALLEYVIEW(dev_priv)) { 3226 dev_priv->cdclk_funcs = &vlv_cdclk_funcs; 3227 } else if (IS_SANDYBRIDGE(dev_priv) || IS_IVYBRIDGE(dev_priv)) { 3228 dev_priv->cdclk_funcs = &fixed_400mhz_cdclk_funcs; 3229 } else if (IS_IRONLAKE(dev_priv)) { 3230 dev_priv->cdclk_funcs = &ilk_cdclk_funcs; 3231 } else if (IS_GM45(dev_priv)) { 3232 dev_priv->cdclk_funcs = &gm45_cdclk_funcs; 3233 } else if (IS_G45(dev_priv)) { 3234 dev_priv->cdclk_funcs = &g33_cdclk_funcs; 3235 } else if (IS_I965GM(dev_priv)) { 3236 dev_priv->cdclk_funcs = &i965gm_cdclk_funcs; 3237 } else if (IS_I965G(dev_priv)) { 3238 dev_priv->cdclk_funcs = &fixed_400mhz_cdclk_funcs; 3239 } else if (IS_PINEVIEW(dev_priv)) { 3240 dev_priv->cdclk_funcs = &pnv_cdclk_funcs; 3241 } else if (IS_G33(dev_priv)) { 3242 dev_priv->cdclk_funcs = &g33_cdclk_funcs; 3243 } else if (IS_I945GM(dev_priv)) { 3244 dev_priv->cdclk_funcs = &i945gm_cdclk_funcs; 3245 } else if (IS_I945G(dev_priv)) { 3246 dev_priv->cdclk_funcs = &fixed_400mhz_cdclk_funcs; 3247 } else if (IS_I915GM(dev_priv)) { 3248 dev_priv->cdclk_funcs = &i915gm_cdclk_funcs; 3249 } else if (IS_I915G(dev_priv)) { 3250 dev_priv->cdclk_funcs = &i915g_cdclk_funcs; 3251 } else if (IS_I865G(dev_priv)) { 3252 dev_priv->cdclk_funcs = &i865g_cdclk_funcs; 3253 } else if (IS_I85X(dev_priv)) { 3254 dev_priv->cdclk_funcs = &i85x_cdclk_funcs; 3255 } else if (IS_I845G(dev_priv)) { 3256 dev_priv->cdclk_funcs = &i845g_cdclk_funcs; 3257 } else if (IS_I830(dev_priv)) { 3258 dev_priv->cdclk_funcs = &i830_cdclk_funcs; 3259 } 3260 3261 if (drm_WARN(&dev_priv->drm, !dev_priv->cdclk_funcs, 3262 "Unknown platform. Assuming i830\n")) 3263 dev_priv->cdclk_funcs = &i830_cdclk_funcs; 3264 } 3265