1 /* 2 * Copyright © 2006 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 20 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 21 * SOFTWARE. 22 * 23 * Authors: 24 * Eric Anholt <eric@anholt.net> 25 * 26 */ 27 28 #include <drm/drm_dp_helper.h> 29 #include <drm/i915_drm.h> 30 31 #include "display/intel_display.h" 32 #include "display/intel_gmbus.h" 33 34 #include "i915_drv.h" 35 36 #define _INTEL_BIOS_PRIVATE 37 #include "intel_vbt_defs.h" 38 39 /** 40 * DOC: Video BIOS Table (VBT) 41 * 42 * The Video BIOS Table, or VBT, provides platform and board specific 43 * configuration information to the driver that is not discoverable or available 44 * through other means. The configuration is mostly related to display 45 * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in 46 * the PCI ROM. 47 * 48 * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB 49 * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that 50 * contain the actual configuration information. The VBT Header, and thus the 51 * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the 52 * BDB Header. The data blocks are concatenated after the BDB Header. The data 53 * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of 54 * data. (Block 53, the MIPI Sequence Block is an exception.) 55 * 56 * The driver parses the VBT during load. The relevant information is stored in 57 * driver private data for ease of use, and the actual VBT is not read after 58 * that. 59 */ 60 61 #define SLAVE_ADDR1 0x70 62 #define SLAVE_ADDR2 0x72 63 64 /* Get BDB block size given a pointer to Block ID. */ 65 static u32 _get_blocksize(const u8 *block_base) 66 { 67 /* The MIPI Sequence Block v3+ has a separate size field. */ 68 if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3) 69 return *((const u32 *)(block_base + 4)); 70 else 71 return *((const u16 *)(block_base + 1)); 72 } 73 74 /* Get BDB block size give a pointer to data after Block ID and Block Size. */ 75 static u32 get_blocksize(const void *block_data) 76 { 77 return _get_blocksize(block_data - 3); 78 } 79 80 static const void * 81 find_section(const void *_bdb, enum bdb_block_id section_id) 82 { 83 const struct bdb_header *bdb = _bdb; 84 const u8 *base = _bdb; 85 int index = 0; 86 u32 total, current_size; 87 enum bdb_block_id current_id; 88 89 /* skip to first section */ 90 index += bdb->header_size; 91 total = bdb->bdb_size; 92 93 /* walk the sections looking for section_id */ 94 while (index + 3 < total) { 95 current_id = *(base + index); 96 current_size = _get_blocksize(base + index); 97 index += 3; 98 99 if (index + current_size > total) 100 return NULL; 101 102 if (current_id == section_id) 103 return base + index; 104 105 index += current_size; 106 } 107 108 return NULL; 109 } 110 111 static void 112 fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, 113 const struct lvds_dvo_timing *dvo_timing) 114 { 115 panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | 116 dvo_timing->hactive_lo; 117 panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + 118 ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); 119 panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + 120 ((dvo_timing->hsync_pulse_width_hi << 8) | 121 dvo_timing->hsync_pulse_width_lo); 122 panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + 123 ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); 124 125 panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | 126 dvo_timing->vactive_lo; 127 panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + 128 ((dvo_timing->vsync_off_hi << 4) | dvo_timing->vsync_off_lo); 129 panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + 130 ((dvo_timing->vsync_pulse_width_hi << 4) | 131 dvo_timing->vsync_pulse_width_lo); 132 panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + 133 ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); 134 panel_fixed_mode->clock = dvo_timing->clock * 10; 135 panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; 136 137 if (dvo_timing->hsync_positive) 138 panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC; 139 else 140 panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC; 141 142 if (dvo_timing->vsync_positive) 143 panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC; 144 else 145 panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; 146 147 panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) | 148 dvo_timing->himage_lo; 149 panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) | 150 dvo_timing->vimage_lo; 151 152 /* Some VBTs have bogus h/vtotal values */ 153 if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) 154 panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; 155 if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) 156 panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; 157 158 drm_mode_set_name(panel_fixed_mode); 159 } 160 161 static const struct lvds_dvo_timing * 162 get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data, 163 const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs, 164 int index) 165 { 166 /* 167 * the size of fp_timing varies on the different platform. 168 * So calculate the DVO timing relative offset in LVDS data 169 * entry to get the DVO timing entry 170 */ 171 172 int lfp_data_size = 173 lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - 174 lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; 175 int dvo_timing_offset = 176 lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset - 177 lvds_lfp_data_ptrs->ptr[0].fp_timing_offset; 178 char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index; 179 180 return (struct lvds_dvo_timing *)(entry + dvo_timing_offset); 181 } 182 183 /* get lvds_fp_timing entry 184 * this function may return NULL if the corresponding entry is invalid 185 */ 186 static const struct lvds_fp_timing * 187 get_lvds_fp_timing(const struct bdb_header *bdb, 188 const struct bdb_lvds_lfp_data *data, 189 const struct bdb_lvds_lfp_data_ptrs *ptrs, 190 int index) 191 { 192 size_t data_ofs = (const u8 *)data - (const u8 *)bdb; 193 u16 data_size = ((const u16 *)data)[-1]; /* stored in header */ 194 size_t ofs; 195 196 if (index >= ARRAY_SIZE(ptrs->ptr)) 197 return NULL; 198 ofs = ptrs->ptr[index].fp_timing_offset; 199 if (ofs < data_ofs || 200 ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size) 201 return NULL; 202 return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs); 203 } 204 205 /* Try to find integrated panel data */ 206 static void 207 parse_lfp_panel_data(struct drm_i915_private *dev_priv, 208 const struct bdb_header *bdb) 209 { 210 const struct bdb_lvds_options *lvds_options; 211 const struct bdb_lvds_lfp_data *lvds_lfp_data; 212 const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; 213 const struct lvds_dvo_timing *panel_dvo_timing; 214 const struct lvds_fp_timing *fp_timing; 215 struct drm_display_mode *panel_fixed_mode; 216 int panel_type; 217 int drrs_mode; 218 int ret; 219 220 lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); 221 if (!lvds_options) 222 return; 223 224 dev_priv->vbt.lvds_dither = lvds_options->pixel_dither; 225 226 ret = intel_opregion_get_panel_type(dev_priv); 227 if (ret >= 0) { 228 WARN_ON(ret > 0xf); 229 panel_type = ret; 230 DRM_DEBUG_KMS("Panel type: %d (OpRegion)\n", panel_type); 231 } else { 232 if (lvds_options->panel_type > 0xf) { 233 DRM_DEBUG_KMS("Invalid VBT panel type 0x%x\n", 234 lvds_options->panel_type); 235 return; 236 } 237 panel_type = lvds_options->panel_type; 238 DRM_DEBUG_KMS("Panel type: %d (VBT)\n", panel_type); 239 } 240 241 dev_priv->vbt.panel_type = panel_type; 242 243 drrs_mode = (lvds_options->dps_panel_type_bits 244 >> (panel_type * 2)) & MODE_MASK; 245 /* 246 * VBT has static DRRS = 0 and seamless DRRS = 2. 247 * The below piece of code is required to adjust vbt.drrs_type 248 * to match the enum drrs_support_type. 249 */ 250 switch (drrs_mode) { 251 case 0: 252 dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT; 253 DRM_DEBUG_KMS("DRRS supported mode is static\n"); 254 break; 255 case 2: 256 dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT; 257 DRM_DEBUG_KMS("DRRS supported mode is seamless\n"); 258 break; 259 default: 260 dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; 261 DRM_DEBUG_KMS("DRRS not supported (VBT input)\n"); 262 break; 263 } 264 265 lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); 266 if (!lvds_lfp_data) 267 return; 268 269 lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS); 270 if (!lvds_lfp_data_ptrs) 271 return; 272 273 panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data, 274 lvds_lfp_data_ptrs, 275 panel_type); 276 277 panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); 278 if (!panel_fixed_mode) 279 return; 280 281 fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing); 282 283 dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode; 284 285 DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n"); 286 drm_mode_debug_printmodeline(panel_fixed_mode); 287 288 fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data, 289 lvds_lfp_data_ptrs, 290 panel_type); 291 if (fp_timing) { 292 /* check the resolution, just to be sure */ 293 if (fp_timing->x_res == panel_fixed_mode->hdisplay && 294 fp_timing->y_res == panel_fixed_mode->vdisplay) { 295 dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val; 296 DRM_DEBUG_KMS("VBT initial LVDS value %x\n", 297 dev_priv->vbt.bios_lvds_val); 298 } 299 } 300 } 301 302 static void 303 parse_lfp_backlight(struct drm_i915_private *dev_priv, 304 const struct bdb_header *bdb) 305 { 306 const struct bdb_lfp_backlight_data *backlight_data; 307 const struct lfp_backlight_data_entry *entry; 308 int panel_type = dev_priv->vbt.panel_type; 309 310 backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT); 311 if (!backlight_data) 312 return; 313 314 if (backlight_data->entry_size != sizeof(backlight_data->data[0])) { 315 DRM_DEBUG_KMS("Unsupported backlight data entry size %u\n", 316 backlight_data->entry_size); 317 return; 318 } 319 320 entry = &backlight_data->data[panel_type]; 321 322 dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM; 323 if (!dev_priv->vbt.backlight.present) { 324 DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n", 325 entry->type); 326 return; 327 } 328 329 dev_priv->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI; 330 if (bdb->version >= 191 && 331 get_blocksize(backlight_data) >= sizeof(*backlight_data)) { 332 const struct lfp_backlight_control_method *method; 333 334 method = &backlight_data->backlight_control[panel_type]; 335 dev_priv->vbt.backlight.type = method->type; 336 dev_priv->vbt.backlight.controller = method->controller; 337 } 338 339 dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; 340 dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm; 341 dev_priv->vbt.backlight.min_brightness = entry->min_brightness; 342 DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, " 343 "active %s, min brightness %u, level %u, controller %u\n", 344 dev_priv->vbt.backlight.pwm_freq_hz, 345 dev_priv->vbt.backlight.active_low_pwm ? "low" : "high", 346 dev_priv->vbt.backlight.min_brightness, 347 backlight_data->level[panel_type], 348 dev_priv->vbt.backlight.controller); 349 } 350 351 /* Try to find sdvo panel data */ 352 static void 353 parse_sdvo_panel_data(struct drm_i915_private *dev_priv, 354 const struct bdb_header *bdb) 355 { 356 const struct bdb_sdvo_panel_dtds *dtds; 357 struct drm_display_mode *panel_fixed_mode; 358 int index; 359 360 index = i915_modparams.vbt_sdvo_panel_type; 361 if (index == -2) { 362 DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n"); 363 return; 364 } 365 366 if (index == -1) { 367 const struct bdb_sdvo_lvds_options *sdvo_lvds_options; 368 369 sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); 370 if (!sdvo_lvds_options) 371 return; 372 373 index = sdvo_lvds_options->panel_type; 374 } 375 376 dtds = find_section(bdb, BDB_SDVO_PANEL_DTDS); 377 if (!dtds) 378 return; 379 380 panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); 381 if (!panel_fixed_mode) 382 return; 383 384 fill_detail_timing_data(panel_fixed_mode, &dtds->dtds[index]); 385 386 dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode; 387 388 DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n"); 389 drm_mode_debug_printmodeline(panel_fixed_mode); 390 } 391 392 static int intel_bios_ssc_frequency(struct drm_i915_private *dev_priv, 393 bool alternate) 394 { 395 switch (INTEL_GEN(dev_priv)) { 396 case 2: 397 return alternate ? 66667 : 48000; 398 case 3: 399 case 4: 400 return alternate ? 100000 : 96000; 401 default: 402 return alternate ? 100000 : 120000; 403 } 404 } 405 406 static void 407 parse_general_features(struct drm_i915_private *dev_priv, 408 const struct bdb_header *bdb) 409 { 410 const struct bdb_general_features *general; 411 412 general = find_section(bdb, BDB_GENERAL_FEATURES); 413 if (!general) 414 return; 415 416 dev_priv->vbt.int_tv_support = general->int_tv_support; 417 /* int_crt_support can't be trusted on earlier platforms */ 418 if (bdb->version >= 155 && 419 (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv))) 420 dev_priv->vbt.int_crt_support = general->int_crt_support; 421 dev_priv->vbt.lvds_use_ssc = general->enable_ssc; 422 dev_priv->vbt.lvds_ssc_freq = 423 intel_bios_ssc_frequency(dev_priv, general->ssc_freq); 424 dev_priv->vbt.display_clock_mode = general->display_clock_mode; 425 dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted; 426 if (bdb->version >= 181) { 427 dev_priv->vbt.orientation = general->rotate_180 ? 428 DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP : 429 DRM_MODE_PANEL_ORIENTATION_NORMAL; 430 } else { 431 dev_priv->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; 432 } 433 DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n", 434 dev_priv->vbt.int_tv_support, 435 dev_priv->vbt.int_crt_support, 436 dev_priv->vbt.lvds_use_ssc, 437 dev_priv->vbt.lvds_ssc_freq, 438 dev_priv->vbt.display_clock_mode, 439 dev_priv->vbt.fdi_rx_polarity_inverted); 440 } 441 442 static const struct child_device_config * 443 child_device_ptr(const struct bdb_general_definitions *defs, int i) 444 { 445 return (const void *) &defs->devices[i * defs->child_dev_size]; 446 } 447 448 static void 449 parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, u8 bdb_version) 450 { 451 struct sdvo_device_mapping *mapping; 452 const struct child_device_config *child; 453 int i, count = 0; 454 455 /* 456 * Only parse SDVO mappings on gens that could have SDVO. This isn't 457 * accurate and doesn't have to be, as long as it's not too strict. 458 */ 459 if (!IS_GEN_RANGE(dev_priv, 3, 7)) { 460 DRM_DEBUG_KMS("Skipping SDVO device mapping\n"); 461 return; 462 } 463 464 for (i = 0, count = 0; i < dev_priv->vbt.child_dev_num; i++) { 465 child = dev_priv->vbt.child_dev + i; 466 467 if (child->slave_addr != SLAVE_ADDR1 && 468 child->slave_addr != SLAVE_ADDR2) { 469 /* 470 * If the slave address is neither 0x70 nor 0x72, 471 * it is not a SDVO device. Skip it. 472 */ 473 continue; 474 } 475 if (child->dvo_port != DEVICE_PORT_DVOB && 476 child->dvo_port != DEVICE_PORT_DVOC) { 477 /* skip the incorrect SDVO port */ 478 DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n"); 479 continue; 480 } 481 DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on" 482 " %s port\n", 483 child->slave_addr, 484 (child->dvo_port == DEVICE_PORT_DVOB) ? 485 "SDVOB" : "SDVOC"); 486 mapping = &dev_priv->vbt.sdvo_mappings[child->dvo_port - 1]; 487 if (!mapping->initialized) { 488 mapping->dvo_port = child->dvo_port; 489 mapping->slave_addr = child->slave_addr; 490 mapping->dvo_wiring = child->dvo_wiring; 491 mapping->ddc_pin = child->ddc_pin; 492 mapping->i2c_pin = child->i2c_pin; 493 mapping->initialized = 1; 494 DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", 495 mapping->dvo_port, 496 mapping->slave_addr, 497 mapping->dvo_wiring, 498 mapping->ddc_pin, 499 mapping->i2c_pin); 500 } else { 501 DRM_DEBUG_KMS("Maybe one SDVO port is shared by " 502 "two SDVO device.\n"); 503 } 504 if (child->slave2_addr) { 505 /* Maybe this is a SDVO device with multiple inputs */ 506 /* And the mapping info is not added */ 507 DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this" 508 " is a SDVO device with multiple inputs.\n"); 509 } 510 count++; 511 } 512 513 if (!count) { 514 /* No SDVO device info is found */ 515 DRM_DEBUG_KMS("No SDVO device info is found in VBT\n"); 516 } 517 } 518 519 static void 520 parse_driver_features(struct drm_i915_private *dev_priv, 521 const struct bdb_header *bdb) 522 { 523 const struct bdb_driver_features *driver; 524 525 driver = find_section(bdb, BDB_DRIVER_FEATURES); 526 if (!driver) 527 return; 528 529 if (INTEL_GEN(dev_priv) >= 5) { 530 /* 531 * Note that we consider BDB_DRIVER_FEATURE_INT_SDVO_LVDS 532 * to mean "eDP". The VBT spec doesn't agree with that 533 * interpretation, but real world VBTs seem to. 534 */ 535 if (driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS) 536 dev_priv->vbt.int_lvds_support = 0; 537 } else { 538 /* 539 * FIXME it's not clear which BDB version has the LVDS config 540 * bits defined. Revision history in the VBT spec says: 541 * "0.92 | Add two definitions for VBT value of LVDS Active 542 * Config (00b and 11b values defined) | 06/13/2005" 543 * but does not the specify the BDB version. 544 * 545 * So far version 134 (on i945gm) is the oldest VBT observed 546 * in the wild with the bits correctly populated. Version 547 * 108 (on i85x) does not have the bits correctly populated. 548 */ 549 if (bdb->version >= 134 && 550 driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS && 551 driver->lvds_config != BDB_DRIVER_FEATURE_INT_SDVO_LVDS) 552 dev_priv->vbt.int_lvds_support = 0; 553 } 554 555 DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled); 556 /* 557 * If DRRS is not supported, drrs_type has to be set to 0. 558 * This is because, VBT is configured in such a way that 559 * static DRRS is 0 and DRRS not supported is represented by 560 * driver->drrs_enabled=false 561 */ 562 if (!driver->drrs_enabled) 563 dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; 564 dev_priv->vbt.psr.enable = driver->psr_enabled; 565 } 566 567 static void 568 parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) 569 { 570 const struct bdb_edp *edp; 571 const struct edp_power_seq *edp_pps; 572 const struct edp_fast_link_params *edp_link_params; 573 int panel_type = dev_priv->vbt.panel_type; 574 575 edp = find_section(bdb, BDB_EDP); 576 if (!edp) 577 return; 578 579 switch ((edp->color_depth >> (panel_type * 2)) & 3) { 580 case EDP_18BPP: 581 dev_priv->vbt.edp.bpp = 18; 582 break; 583 case EDP_24BPP: 584 dev_priv->vbt.edp.bpp = 24; 585 break; 586 case EDP_30BPP: 587 dev_priv->vbt.edp.bpp = 30; 588 break; 589 } 590 591 /* Get the eDP sequencing and link info */ 592 edp_pps = &edp->power_seqs[panel_type]; 593 edp_link_params = &edp->fast_link_params[panel_type]; 594 595 dev_priv->vbt.edp.pps = *edp_pps; 596 597 switch (edp_link_params->rate) { 598 case EDP_RATE_1_62: 599 dev_priv->vbt.edp.rate = DP_LINK_BW_1_62; 600 break; 601 case EDP_RATE_2_7: 602 dev_priv->vbt.edp.rate = DP_LINK_BW_2_7; 603 break; 604 default: 605 DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n", 606 edp_link_params->rate); 607 break; 608 } 609 610 switch (edp_link_params->lanes) { 611 case EDP_LANE_1: 612 dev_priv->vbt.edp.lanes = 1; 613 break; 614 case EDP_LANE_2: 615 dev_priv->vbt.edp.lanes = 2; 616 break; 617 case EDP_LANE_4: 618 dev_priv->vbt.edp.lanes = 4; 619 break; 620 default: 621 DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n", 622 edp_link_params->lanes); 623 break; 624 } 625 626 switch (edp_link_params->preemphasis) { 627 case EDP_PREEMPHASIS_NONE: 628 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0; 629 break; 630 case EDP_PREEMPHASIS_3_5dB: 631 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1; 632 break; 633 case EDP_PREEMPHASIS_6dB: 634 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2; 635 break; 636 case EDP_PREEMPHASIS_9_5dB: 637 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3; 638 break; 639 default: 640 DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n", 641 edp_link_params->preemphasis); 642 break; 643 } 644 645 switch (edp_link_params->vswing) { 646 case EDP_VSWING_0_4V: 647 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0; 648 break; 649 case EDP_VSWING_0_6V: 650 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1; 651 break; 652 case EDP_VSWING_0_8V: 653 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2; 654 break; 655 case EDP_VSWING_1_2V: 656 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3; 657 break; 658 default: 659 DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n", 660 edp_link_params->vswing); 661 break; 662 } 663 664 if (bdb->version >= 173) { 665 u8 vswing; 666 667 /* Don't read from VBT if module parameter has valid value*/ 668 if (i915_modparams.edp_vswing) { 669 dev_priv->vbt.edp.low_vswing = 670 i915_modparams.edp_vswing == 1; 671 } else { 672 vswing = (edp->edp_vswing_preemph >> (panel_type * 4)) & 0xF; 673 dev_priv->vbt.edp.low_vswing = vswing == 0; 674 } 675 } 676 } 677 678 static void 679 parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) 680 { 681 const struct bdb_psr *psr; 682 const struct psr_table *psr_table; 683 int panel_type = dev_priv->vbt.panel_type; 684 685 psr = find_section(bdb, BDB_PSR); 686 if (!psr) { 687 DRM_DEBUG_KMS("No PSR BDB found.\n"); 688 return; 689 } 690 691 psr_table = &psr->psr_table[panel_type]; 692 693 dev_priv->vbt.psr.full_link = psr_table->full_link; 694 dev_priv->vbt.psr.require_aux_wakeup = psr_table->require_aux_to_wakeup; 695 696 /* Allowed VBT values goes from 0 to 15 */ 697 dev_priv->vbt.psr.idle_frames = psr_table->idle_frames < 0 ? 0 : 698 psr_table->idle_frames > 15 ? 15 : psr_table->idle_frames; 699 700 switch (psr_table->lines_to_wait) { 701 case 0: 702 dev_priv->vbt.psr.lines_to_wait = PSR_0_LINES_TO_WAIT; 703 break; 704 case 1: 705 dev_priv->vbt.psr.lines_to_wait = PSR_1_LINE_TO_WAIT; 706 break; 707 case 2: 708 dev_priv->vbt.psr.lines_to_wait = PSR_4_LINES_TO_WAIT; 709 break; 710 case 3: 711 dev_priv->vbt.psr.lines_to_wait = PSR_8_LINES_TO_WAIT; 712 break; 713 default: 714 DRM_DEBUG_KMS("VBT has unknown PSR lines to wait %u\n", 715 psr_table->lines_to_wait); 716 break; 717 } 718 719 /* 720 * New psr options 0=500us, 1=100us, 2=2500us, 3=0us 721 * Old decimal value is wake up time in multiples of 100 us. 722 */ 723 if (bdb->version >= 205 && 724 (IS_GEN9_BC(dev_priv) || IS_GEMINILAKE(dev_priv) || 725 INTEL_GEN(dev_priv) >= 10)) { 726 switch (psr_table->tp1_wakeup_time) { 727 case 0: 728 dev_priv->vbt.psr.tp1_wakeup_time_us = 500; 729 break; 730 case 1: 731 dev_priv->vbt.psr.tp1_wakeup_time_us = 100; 732 break; 733 case 3: 734 dev_priv->vbt.psr.tp1_wakeup_time_us = 0; 735 break; 736 default: 737 DRM_DEBUG_KMS("VBT tp1 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", 738 psr_table->tp1_wakeup_time); 739 /* fallthrough */ 740 case 2: 741 dev_priv->vbt.psr.tp1_wakeup_time_us = 2500; 742 break; 743 } 744 745 switch (psr_table->tp2_tp3_wakeup_time) { 746 case 0: 747 dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 500; 748 break; 749 case 1: 750 dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 100; 751 break; 752 case 3: 753 dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 0; 754 break; 755 default: 756 DRM_DEBUG_KMS("VBT tp2_tp3 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", 757 psr_table->tp2_tp3_wakeup_time); 758 /* fallthrough */ 759 case 2: 760 dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 2500; 761 break; 762 } 763 } else { 764 dev_priv->vbt.psr.tp1_wakeup_time_us = psr_table->tp1_wakeup_time * 100; 765 dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = psr_table->tp2_tp3_wakeup_time * 100; 766 } 767 768 if (bdb->version >= 226) { 769 u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time; 770 771 wakeup_time = (wakeup_time >> (2 * panel_type)) & 0x3; 772 switch (wakeup_time) { 773 case 0: 774 wakeup_time = 500; 775 break; 776 case 1: 777 wakeup_time = 100; 778 break; 779 case 3: 780 wakeup_time = 50; 781 break; 782 default: 783 case 2: 784 wakeup_time = 2500; 785 break; 786 } 787 dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = wakeup_time; 788 } else { 789 /* Reusing PSR1 wakeup time for PSR2 in older VBTs */ 790 dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = dev_priv->vbt.psr.tp2_tp3_wakeup_time_us; 791 } 792 } 793 794 static void parse_dsi_backlight_ports(struct drm_i915_private *dev_priv, 795 u16 version, enum port port) 796 { 797 if (!dev_priv->vbt.dsi.config->dual_link || version < 197) { 798 dev_priv->vbt.dsi.bl_ports = BIT(port); 799 if (dev_priv->vbt.dsi.config->cabc_supported) 800 dev_priv->vbt.dsi.cabc_ports = BIT(port); 801 802 return; 803 } 804 805 switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) { 806 case DL_DCS_PORT_A: 807 dev_priv->vbt.dsi.bl_ports = BIT(PORT_A); 808 break; 809 case DL_DCS_PORT_C: 810 dev_priv->vbt.dsi.bl_ports = BIT(PORT_C); 811 break; 812 default: 813 case DL_DCS_PORT_A_AND_C: 814 dev_priv->vbt.dsi.bl_ports = BIT(PORT_A) | BIT(PORT_C); 815 break; 816 } 817 818 if (!dev_priv->vbt.dsi.config->cabc_supported) 819 return; 820 821 switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) { 822 case DL_DCS_PORT_A: 823 dev_priv->vbt.dsi.cabc_ports = BIT(PORT_A); 824 break; 825 case DL_DCS_PORT_C: 826 dev_priv->vbt.dsi.cabc_ports = BIT(PORT_C); 827 break; 828 default: 829 case DL_DCS_PORT_A_AND_C: 830 dev_priv->vbt.dsi.cabc_ports = 831 BIT(PORT_A) | BIT(PORT_C); 832 break; 833 } 834 } 835 836 static void 837 parse_mipi_config(struct drm_i915_private *dev_priv, 838 const struct bdb_header *bdb) 839 { 840 const struct bdb_mipi_config *start; 841 const struct mipi_config *config; 842 const struct mipi_pps_data *pps; 843 int panel_type = dev_priv->vbt.panel_type; 844 enum port port; 845 846 /* parse MIPI blocks only if LFP type is MIPI */ 847 if (!intel_bios_is_dsi_present(dev_priv, &port)) 848 return; 849 850 /* Initialize this to undefined indicating no generic MIPI support */ 851 dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID; 852 853 /* Block #40 is already parsed and panel_fixed_mode is 854 * stored in dev_priv->lfp_lvds_vbt_mode 855 * resuse this when needed 856 */ 857 858 /* Parse #52 for panel index used from panel_type already 859 * parsed 860 */ 861 start = find_section(bdb, BDB_MIPI_CONFIG); 862 if (!start) { 863 DRM_DEBUG_KMS("No MIPI config BDB found"); 864 return; 865 } 866 867 DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n", 868 panel_type); 869 870 /* 871 * get hold of the correct configuration block and pps data as per 872 * the panel_type as index 873 */ 874 config = &start->config[panel_type]; 875 pps = &start->pps[panel_type]; 876 877 /* store as of now full data. Trim when we realise all is not needed */ 878 dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL); 879 if (!dev_priv->vbt.dsi.config) 880 return; 881 882 dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL); 883 if (!dev_priv->vbt.dsi.pps) { 884 kfree(dev_priv->vbt.dsi.config); 885 return; 886 } 887 888 parse_dsi_backlight_ports(dev_priv, bdb->version, port); 889 890 /* FIXME is the 90 vs. 270 correct? */ 891 switch (config->rotation) { 892 case ENABLE_ROTATION_0: 893 /* 894 * Most (all?) VBTs claim 0 degrees despite having 895 * an upside down panel, thus we do not trust this. 896 */ 897 dev_priv->vbt.dsi.orientation = 898 DRM_MODE_PANEL_ORIENTATION_UNKNOWN; 899 break; 900 case ENABLE_ROTATION_90: 901 dev_priv->vbt.dsi.orientation = 902 DRM_MODE_PANEL_ORIENTATION_RIGHT_UP; 903 break; 904 case ENABLE_ROTATION_180: 905 dev_priv->vbt.dsi.orientation = 906 DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; 907 break; 908 case ENABLE_ROTATION_270: 909 dev_priv->vbt.dsi.orientation = 910 DRM_MODE_PANEL_ORIENTATION_LEFT_UP; 911 break; 912 } 913 914 /* We have mandatory mipi config blocks. Initialize as generic panel */ 915 dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID; 916 } 917 918 /* Find the sequence block and size for the given panel. */ 919 static const u8 * 920 find_panel_sequence_block(const struct bdb_mipi_sequence *sequence, 921 u16 panel_id, u32 *seq_size) 922 { 923 u32 total = get_blocksize(sequence); 924 const u8 *data = &sequence->data[0]; 925 u8 current_id; 926 u32 current_size; 927 int header_size = sequence->version >= 3 ? 5 : 3; 928 int index = 0; 929 int i; 930 931 /* skip new block size */ 932 if (sequence->version >= 3) 933 data += 4; 934 935 for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) { 936 if (index + header_size > total) { 937 DRM_ERROR("Invalid sequence block (header)\n"); 938 return NULL; 939 } 940 941 current_id = *(data + index); 942 if (sequence->version >= 3) 943 current_size = *((const u32 *)(data + index + 1)); 944 else 945 current_size = *((const u16 *)(data + index + 1)); 946 947 index += header_size; 948 949 if (index + current_size > total) { 950 DRM_ERROR("Invalid sequence block\n"); 951 return NULL; 952 } 953 954 if (current_id == panel_id) { 955 *seq_size = current_size; 956 return data + index; 957 } 958 959 index += current_size; 960 } 961 962 DRM_ERROR("Sequence block detected but no valid configuration\n"); 963 964 return NULL; 965 } 966 967 static int goto_next_sequence(const u8 *data, int index, int total) 968 { 969 u16 len; 970 971 /* Skip Sequence Byte. */ 972 for (index = index + 1; index < total; index += len) { 973 u8 operation_byte = *(data + index); 974 index++; 975 976 switch (operation_byte) { 977 case MIPI_SEQ_ELEM_END: 978 return index; 979 case MIPI_SEQ_ELEM_SEND_PKT: 980 if (index + 4 > total) 981 return 0; 982 983 len = *((const u16 *)(data + index + 2)) + 4; 984 break; 985 case MIPI_SEQ_ELEM_DELAY: 986 len = 4; 987 break; 988 case MIPI_SEQ_ELEM_GPIO: 989 len = 2; 990 break; 991 case MIPI_SEQ_ELEM_I2C: 992 if (index + 7 > total) 993 return 0; 994 len = *(data + index + 6) + 7; 995 break; 996 default: 997 DRM_ERROR("Unknown operation byte\n"); 998 return 0; 999 } 1000 } 1001 1002 return 0; 1003 } 1004 1005 static int goto_next_sequence_v3(const u8 *data, int index, int total) 1006 { 1007 int seq_end; 1008 u16 len; 1009 u32 size_of_sequence; 1010 1011 /* 1012 * Could skip sequence based on Size of Sequence alone, but also do some 1013 * checking on the structure. 1014 */ 1015 if (total < 5) { 1016 DRM_ERROR("Too small sequence size\n"); 1017 return 0; 1018 } 1019 1020 /* Skip Sequence Byte. */ 1021 index++; 1022 1023 /* 1024 * Size of Sequence. Excludes the Sequence Byte and the size itself, 1025 * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END 1026 * byte. 1027 */ 1028 size_of_sequence = *((const u32 *)(data + index)); 1029 index += 4; 1030 1031 seq_end = index + size_of_sequence; 1032 if (seq_end > total) { 1033 DRM_ERROR("Invalid sequence size\n"); 1034 return 0; 1035 } 1036 1037 for (; index < total; index += len) { 1038 u8 operation_byte = *(data + index); 1039 index++; 1040 1041 if (operation_byte == MIPI_SEQ_ELEM_END) { 1042 if (index != seq_end) { 1043 DRM_ERROR("Invalid element structure\n"); 1044 return 0; 1045 } 1046 return index; 1047 } 1048 1049 len = *(data + index); 1050 index++; 1051 1052 /* 1053 * FIXME: Would be nice to check elements like for v1/v2 in 1054 * goto_next_sequence() above. 1055 */ 1056 switch (operation_byte) { 1057 case MIPI_SEQ_ELEM_SEND_PKT: 1058 case MIPI_SEQ_ELEM_DELAY: 1059 case MIPI_SEQ_ELEM_GPIO: 1060 case MIPI_SEQ_ELEM_I2C: 1061 case MIPI_SEQ_ELEM_SPI: 1062 case MIPI_SEQ_ELEM_PMIC: 1063 break; 1064 default: 1065 DRM_ERROR("Unknown operation byte %u\n", 1066 operation_byte); 1067 break; 1068 } 1069 } 1070 1071 return 0; 1072 } 1073 1074 /* 1075 * Get len of pre-fixed deassert fragment from a v1 init OTP sequence, 1076 * skip all delay + gpio operands and stop at the first DSI packet op. 1077 */ 1078 static int get_init_otp_deassert_fragment_len(struct drm_i915_private *dev_priv) 1079 { 1080 const u8 *data = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; 1081 int index, len; 1082 1083 if (WARN_ON(!data || dev_priv->vbt.dsi.seq_version != 1)) 1084 return 0; 1085 1086 /* index = 1 to skip sequence byte */ 1087 for (index = 1; data[index] != MIPI_SEQ_ELEM_END; index += len) { 1088 switch (data[index]) { 1089 case MIPI_SEQ_ELEM_SEND_PKT: 1090 return index == 1 ? 0 : index; 1091 case MIPI_SEQ_ELEM_DELAY: 1092 len = 5; /* 1 byte for operand + uint32 */ 1093 break; 1094 case MIPI_SEQ_ELEM_GPIO: 1095 len = 3; /* 1 byte for op, 1 for gpio_nr, 1 for value */ 1096 break; 1097 default: 1098 return 0; 1099 } 1100 } 1101 1102 return 0; 1103 } 1104 1105 /* 1106 * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. 1107 * The deassert must be done before calling intel_dsi_device_ready, so for 1108 * these devices we split the init OTP sequence into a deassert sequence and 1109 * the actual init OTP part. 1110 */ 1111 static void fixup_mipi_sequences(struct drm_i915_private *dev_priv) 1112 { 1113 u8 *init_otp; 1114 int len; 1115 1116 /* Limit this to VLV for now. */ 1117 if (!IS_VALLEYVIEW(dev_priv)) 1118 return; 1119 1120 /* Limit this to v1 vid-mode sequences */ 1121 if (dev_priv->vbt.dsi.config->is_cmd_mode || 1122 dev_priv->vbt.dsi.seq_version != 1) 1123 return; 1124 1125 /* Only do this if there are otp and assert seqs and no deassert seq */ 1126 if (!dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] || 1127 !dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET] || 1128 dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]) 1129 return; 1130 1131 /* The deassert-sequence ends at the first DSI packet */ 1132 len = get_init_otp_deassert_fragment_len(dev_priv); 1133 if (!len) 1134 return; 1135 1136 DRM_DEBUG_KMS("Using init OTP fragment to deassert reset\n"); 1137 1138 /* Copy the fragment, update seq byte and terminate it */ 1139 init_otp = (u8 *)dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; 1140 dev_priv->vbt.dsi.deassert_seq = kmemdup(init_otp, len + 1, GFP_KERNEL); 1141 if (!dev_priv->vbt.dsi.deassert_seq) 1142 return; 1143 dev_priv->vbt.dsi.deassert_seq[0] = MIPI_SEQ_DEASSERT_RESET; 1144 dev_priv->vbt.dsi.deassert_seq[len] = MIPI_SEQ_ELEM_END; 1145 /* Use the copy for deassert */ 1146 dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET] = 1147 dev_priv->vbt.dsi.deassert_seq; 1148 /* Replace the last byte of the fragment with init OTP seq byte */ 1149 init_otp[len - 1] = MIPI_SEQ_INIT_OTP; 1150 /* And make MIPI_MIPI_SEQ_INIT_OTP point to it */ 1151 dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] = init_otp + len - 1; 1152 } 1153 1154 static void 1155 parse_mipi_sequence(struct drm_i915_private *dev_priv, 1156 const struct bdb_header *bdb) 1157 { 1158 int panel_type = dev_priv->vbt.panel_type; 1159 const struct bdb_mipi_sequence *sequence; 1160 const u8 *seq_data; 1161 u32 seq_size; 1162 u8 *data; 1163 int index = 0; 1164 1165 /* Only our generic panel driver uses the sequence block. */ 1166 if (dev_priv->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID) 1167 return; 1168 1169 sequence = find_section(bdb, BDB_MIPI_SEQUENCE); 1170 if (!sequence) { 1171 DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n"); 1172 return; 1173 } 1174 1175 /* Fail gracefully for forward incompatible sequence block. */ 1176 if (sequence->version >= 4) { 1177 DRM_ERROR("Unable to parse MIPI Sequence Block v%u\n", 1178 sequence->version); 1179 return; 1180 } 1181 1182 DRM_DEBUG_DRIVER("Found MIPI sequence block v%u\n", sequence->version); 1183 1184 seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size); 1185 if (!seq_data) 1186 return; 1187 1188 data = kmemdup(seq_data, seq_size, GFP_KERNEL); 1189 if (!data) 1190 return; 1191 1192 /* Parse the sequences, store pointers to each sequence. */ 1193 for (;;) { 1194 u8 seq_id = *(data + index); 1195 if (seq_id == MIPI_SEQ_END) 1196 break; 1197 1198 if (seq_id >= MIPI_SEQ_MAX) { 1199 DRM_ERROR("Unknown sequence %u\n", seq_id); 1200 goto err; 1201 } 1202 1203 /* Log about presence of sequences we won't run. */ 1204 if (seq_id == MIPI_SEQ_TEAR_ON || seq_id == MIPI_SEQ_TEAR_OFF) 1205 DRM_DEBUG_KMS("Unsupported sequence %u\n", seq_id); 1206 1207 dev_priv->vbt.dsi.sequence[seq_id] = data + index; 1208 1209 if (sequence->version >= 3) 1210 index = goto_next_sequence_v3(data, index, seq_size); 1211 else 1212 index = goto_next_sequence(data, index, seq_size); 1213 if (!index) { 1214 DRM_ERROR("Invalid sequence %u\n", seq_id); 1215 goto err; 1216 } 1217 } 1218 1219 dev_priv->vbt.dsi.data = data; 1220 dev_priv->vbt.dsi.size = seq_size; 1221 dev_priv->vbt.dsi.seq_version = sequence->version; 1222 1223 fixup_mipi_sequences(dev_priv); 1224 1225 DRM_DEBUG_DRIVER("MIPI related VBT parsing complete\n"); 1226 return; 1227 1228 err: 1229 kfree(data); 1230 memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence)); 1231 } 1232 1233 static u8 translate_iboost(u8 val) 1234 { 1235 static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */ 1236 1237 if (val >= ARRAY_SIZE(mapping)) { 1238 DRM_DEBUG_KMS("Unsupported I_boost value found in VBT (%d), display may not work properly\n", val); 1239 return 0; 1240 } 1241 return mapping[val]; 1242 } 1243 1244 static enum port get_port_by_ddc_pin(struct drm_i915_private *i915, u8 ddc_pin) 1245 { 1246 const struct ddi_vbt_port_info *info; 1247 enum port port; 1248 1249 for (port = PORT_A; port < I915_MAX_PORTS; port++) { 1250 info = &i915->vbt.ddi_port_info[port]; 1251 1252 if (info->child && ddc_pin == info->alternate_ddc_pin) 1253 return port; 1254 } 1255 1256 return PORT_NONE; 1257 } 1258 1259 static void sanitize_ddc_pin(struct drm_i915_private *dev_priv, 1260 enum port port) 1261 { 1262 struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; 1263 enum port p; 1264 1265 if (!info->alternate_ddc_pin) 1266 return; 1267 1268 p = get_port_by_ddc_pin(dev_priv, info->alternate_ddc_pin); 1269 if (p != PORT_NONE) { 1270 DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, " 1271 "disabling port %c DVI/HDMI support\n", 1272 port_name(port), info->alternate_ddc_pin, 1273 port_name(p), port_name(port)); 1274 1275 /* 1276 * If we have multiple ports supposedly sharing the 1277 * pin, then dvi/hdmi couldn't exist on the shared 1278 * port. Otherwise they share the same ddc bin and 1279 * system couldn't communicate with them separately. 1280 * 1281 * Give child device order the priority, first come first 1282 * served. 1283 */ 1284 info->supports_dvi = false; 1285 info->supports_hdmi = false; 1286 info->alternate_ddc_pin = 0; 1287 } 1288 } 1289 1290 static enum port get_port_by_aux_ch(struct drm_i915_private *i915, u8 aux_ch) 1291 { 1292 const struct ddi_vbt_port_info *info; 1293 enum port port; 1294 1295 for (port = PORT_A; port < I915_MAX_PORTS; port++) { 1296 info = &i915->vbt.ddi_port_info[port]; 1297 1298 if (info->child && aux_ch == info->alternate_aux_channel) 1299 return port; 1300 } 1301 1302 return PORT_NONE; 1303 } 1304 1305 static void sanitize_aux_ch(struct drm_i915_private *dev_priv, 1306 enum port port) 1307 { 1308 struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; 1309 enum port p; 1310 1311 if (!info->alternate_aux_channel) 1312 return; 1313 1314 p = get_port_by_aux_ch(dev_priv, info->alternate_aux_channel); 1315 if (p != PORT_NONE) { 1316 DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, " 1317 "disabling port %c DP support\n", 1318 port_name(port), info->alternate_aux_channel, 1319 port_name(p), port_name(port)); 1320 1321 /* 1322 * If we have multiple ports supposedlt sharing the 1323 * aux channel, then DP couldn't exist on the shared 1324 * port. Otherwise they share the same aux channel 1325 * and system couldn't communicate with them separately. 1326 * 1327 * Give child device order the priority, first come first 1328 * served. 1329 */ 1330 info->supports_dp = false; 1331 info->alternate_aux_channel = 0; 1332 } 1333 } 1334 1335 static const u8 cnp_ddc_pin_map[] = { 1336 [0] = 0, /* N/A */ 1337 [DDC_BUS_DDI_B] = GMBUS_PIN_1_BXT, 1338 [DDC_BUS_DDI_C] = GMBUS_PIN_2_BXT, 1339 [DDC_BUS_DDI_D] = GMBUS_PIN_4_CNP, /* sic */ 1340 [DDC_BUS_DDI_F] = GMBUS_PIN_3_BXT, /* sic */ 1341 }; 1342 1343 static const u8 icp_ddc_pin_map[] = { 1344 [ICL_DDC_BUS_DDI_A] = GMBUS_PIN_1_BXT, 1345 [ICL_DDC_BUS_DDI_B] = GMBUS_PIN_2_BXT, 1346 [TGL_DDC_BUS_DDI_C] = GMBUS_PIN_3_BXT, 1347 [ICL_DDC_BUS_PORT_1] = GMBUS_PIN_9_TC1_ICP, 1348 [ICL_DDC_BUS_PORT_2] = GMBUS_PIN_10_TC2_ICP, 1349 [ICL_DDC_BUS_PORT_3] = GMBUS_PIN_11_TC3_ICP, 1350 [ICL_DDC_BUS_PORT_4] = GMBUS_PIN_12_TC4_ICP, 1351 [TGL_DDC_BUS_PORT_5] = GMBUS_PIN_13_TC5_TGP, 1352 [TGL_DDC_BUS_PORT_6] = GMBUS_PIN_14_TC6_TGP, 1353 }; 1354 1355 static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin) 1356 { 1357 const u8 *ddc_pin_map; 1358 int n_entries; 1359 1360 if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) { 1361 ddc_pin_map = icp_ddc_pin_map; 1362 n_entries = ARRAY_SIZE(icp_ddc_pin_map); 1363 } else if (HAS_PCH_CNP(dev_priv)) { 1364 ddc_pin_map = cnp_ddc_pin_map; 1365 n_entries = ARRAY_SIZE(cnp_ddc_pin_map); 1366 } else { 1367 /* Assuming direct map */ 1368 return vbt_pin; 1369 } 1370 1371 if (vbt_pin < n_entries && ddc_pin_map[vbt_pin] != 0) 1372 return ddc_pin_map[vbt_pin]; 1373 1374 DRM_DEBUG_KMS("Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n", 1375 vbt_pin); 1376 return 0; 1377 } 1378 1379 static enum port dvo_port_to_port(u8 dvo_port) 1380 { 1381 /* 1382 * Each DDI port can have more than one value on the "DVO Port" field, 1383 * so look for all the possible values for each port. 1384 */ 1385 static const int dvo_ports[][3] = { 1386 [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1}, 1387 [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1}, 1388 [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1}, 1389 [PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1}, 1390 [PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE}, 1391 [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1}, 1392 }; 1393 enum port port; 1394 int i; 1395 1396 for (port = PORT_A; port < ARRAY_SIZE(dvo_ports); port++) { 1397 for (i = 0; i < ARRAY_SIZE(dvo_ports[port]); i++) { 1398 if (dvo_ports[port][i] == -1) 1399 break; 1400 1401 if (dvo_port == dvo_ports[port][i]) 1402 return port; 1403 } 1404 } 1405 1406 return PORT_NONE; 1407 } 1408 1409 static void parse_ddi_port(struct drm_i915_private *dev_priv, 1410 const struct child_device_config *child, 1411 u8 bdb_version) 1412 { 1413 struct ddi_vbt_port_info *info; 1414 bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; 1415 enum port port; 1416 1417 port = dvo_port_to_port(child->dvo_port); 1418 if (port == PORT_NONE) 1419 return; 1420 1421 info = &dev_priv->vbt.ddi_port_info[port]; 1422 1423 if (info->child) { 1424 DRM_DEBUG_KMS("More than one child device for port %c in VBT, using the first.\n", 1425 port_name(port)); 1426 return; 1427 } 1428 1429 is_dvi = child->device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING; 1430 is_dp = child->device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT; 1431 is_crt = child->device_type & DEVICE_TYPE_ANALOG_OUTPUT; 1432 is_hdmi = is_dvi && (child->device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0; 1433 is_edp = is_dp && (child->device_type & DEVICE_TYPE_INTERNAL_CONNECTOR); 1434 1435 if (port == PORT_A && is_dvi) { 1436 DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n", 1437 is_hdmi ? "/HDMI" : ""); 1438 is_dvi = false; 1439 is_hdmi = false; 1440 } 1441 1442 info->supports_dvi = is_dvi; 1443 info->supports_hdmi = is_hdmi; 1444 info->supports_dp = is_dp; 1445 info->supports_edp = is_edp; 1446 1447 if (bdb_version >= 195) 1448 info->supports_typec_usb = child->dp_usb_type_c; 1449 1450 if (bdb_version >= 209) 1451 info->supports_tbt = child->tbt; 1452 1453 DRM_DEBUG_KMS("Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d LSPCON:%d USB-Type-C:%d TBT:%d\n", 1454 port_name(port), is_crt, is_dvi, is_hdmi, is_dp, is_edp, 1455 HAS_LSPCON(dev_priv) && child->lspcon, 1456 info->supports_typec_usb, info->supports_tbt); 1457 1458 if (is_edp && is_dvi) 1459 DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n", 1460 port_name(port)); 1461 if (is_crt && port != PORT_E) 1462 DRM_DEBUG_KMS("Port %c is analog\n", port_name(port)); 1463 if (is_crt && (is_dvi || is_dp)) 1464 DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n", 1465 port_name(port)); 1466 if (is_dvi && (port == PORT_A || port == PORT_E)) 1467 DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port)); 1468 if (!is_dvi && !is_dp && !is_crt) 1469 DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n", 1470 port_name(port)); 1471 if (is_edp && (port == PORT_B || port == PORT_C || port == PORT_E)) 1472 DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port)); 1473 1474 if (is_dvi) { 1475 u8 ddc_pin; 1476 1477 ddc_pin = map_ddc_pin(dev_priv, child->ddc_pin); 1478 if (intel_gmbus_is_valid_pin(dev_priv, ddc_pin)) { 1479 info->alternate_ddc_pin = ddc_pin; 1480 sanitize_ddc_pin(dev_priv, port); 1481 } else { 1482 DRM_DEBUG_KMS("Port %c has invalid DDC pin %d, " 1483 "sticking to defaults\n", 1484 port_name(port), ddc_pin); 1485 } 1486 } 1487 1488 if (is_dp) { 1489 info->alternate_aux_channel = child->aux_channel; 1490 1491 sanitize_aux_ch(dev_priv, port); 1492 } 1493 1494 if (bdb_version >= 158) { 1495 /* The VBT HDMI level shift values match the table we have. */ 1496 u8 hdmi_level_shift = child->hdmi_level_shifter_value; 1497 DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n", 1498 port_name(port), 1499 hdmi_level_shift); 1500 info->hdmi_level_shift = hdmi_level_shift; 1501 } 1502 1503 if (bdb_version >= 204) { 1504 int max_tmds_clock; 1505 1506 switch (child->hdmi_max_data_rate) { 1507 default: 1508 MISSING_CASE(child->hdmi_max_data_rate); 1509 /* fall through */ 1510 case HDMI_MAX_DATA_RATE_PLATFORM: 1511 max_tmds_clock = 0; 1512 break; 1513 case HDMI_MAX_DATA_RATE_297: 1514 max_tmds_clock = 297000; 1515 break; 1516 case HDMI_MAX_DATA_RATE_165: 1517 max_tmds_clock = 165000; 1518 break; 1519 } 1520 1521 if (max_tmds_clock) 1522 DRM_DEBUG_KMS("VBT HDMI max TMDS clock for port %c: %d kHz\n", 1523 port_name(port), max_tmds_clock); 1524 info->max_tmds_clock = max_tmds_clock; 1525 } 1526 1527 /* Parse the I_boost config for SKL and above */ 1528 if (bdb_version >= 196 && child->iboost) { 1529 info->dp_boost_level = translate_iboost(child->dp_iboost_level); 1530 DRM_DEBUG_KMS("VBT (e)DP boost level for port %c: %d\n", 1531 port_name(port), info->dp_boost_level); 1532 info->hdmi_boost_level = translate_iboost(child->hdmi_iboost_level); 1533 DRM_DEBUG_KMS("VBT HDMI boost level for port %c: %d\n", 1534 port_name(port), info->hdmi_boost_level); 1535 } 1536 1537 /* DP max link rate for CNL+ */ 1538 if (bdb_version >= 216) { 1539 switch (child->dp_max_link_rate) { 1540 default: 1541 case VBT_DP_MAX_LINK_RATE_HBR3: 1542 info->dp_max_link_rate = 810000; 1543 break; 1544 case VBT_DP_MAX_LINK_RATE_HBR2: 1545 info->dp_max_link_rate = 540000; 1546 break; 1547 case VBT_DP_MAX_LINK_RATE_HBR: 1548 info->dp_max_link_rate = 270000; 1549 break; 1550 case VBT_DP_MAX_LINK_RATE_LBR: 1551 info->dp_max_link_rate = 162000; 1552 break; 1553 } 1554 DRM_DEBUG_KMS("VBT DP max link rate for port %c: %d\n", 1555 port_name(port), info->dp_max_link_rate); 1556 } 1557 1558 info->child = child; 1559 } 1560 1561 static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version) 1562 { 1563 const struct child_device_config *child; 1564 int i; 1565 1566 if (!HAS_DDI(dev_priv) && !IS_CHERRYVIEW(dev_priv)) 1567 return; 1568 1569 if (bdb_version < 155) 1570 return; 1571 1572 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { 1573 child = dev_priv->vbt.child_dev + i; 1574 1575 parse_ddi_port(dev_priv, child, bdb_version); 1576 } 1577 } 1578 1579 static void 1580 parse_general_definitions(struct drm_i915_private *dev_priv, 1581 const struct bdb_header *bdb) 1582 { 1583 const struct bdb_general_definitions *defs; 1584 const struct child_device_config *child; 1585 int i, child_device_num, count; 1586 u8 expected_size; 1587 u16 block_size; 1588 int bus_pin; 1589 1590 defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); 1591 if (!defs) { 1592 DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n"); 1593 return; 1594 } 1595 1596 block_size = get_blocksize(defs); 1597 if (block_size < sizeof(*defs)) { 1598 DRM_DEBUG_KMS("General definitions block too small (%u)\n", 1599 block_size); 1600 return; 1601 } 1602 1603 bus_pin = defs->crt_ddc_gmbus_pin; 1604 DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin); 1605 if (intel_gmbus_is_valid_pin(dev_priv, bus_pin)) 1606 dev_priv->vbt.crt_ddc_pin = bus_pin; 1607 1608 if (bdb->version < 106) { 1609 expected_size = 22; 1610 } else if (bdb->version < 111) { 1611 expected_size = 27; 1612 } else if (bdb->version < 195) { 1613 expected_size = LEGACY_CHILD_DEVICE_CONFIG_SIZE; 1614 } else if (bdb->version == 195) { 1615 expected_size = 37; 1616 } else if (bdb->version <= 215) { 1617 expected_size = 38; 1618 } else if (bdb->version <= 216) { 1619 expected_size = 39; 1620 } else { 1621 expected_size = sizeof(*child); 1622 BUILD_BUG_ON(sizeof(*child) < 39); 1623 DRM_DEBUG_DRIVER("Expected child device config size for VBT version %u not known; assuming %u\n", 1624 bdb->version, expected_size); 1625 } 1626 1627 /* Flag an error for unexpected size, but continue anyway. */ 1628 if (defs->child_dev_size != expected_size) 1629 DRM_ERROR("Unexpected child device config size %u (expected %u for VBT version %u)\n", 1630 defs->child_dev_size, expected_size, bdb->version); 1631 1632 /* The legacy sized child device config is the minimum we need. */ 1633 if (defs->child_dev_size < LEGACY_CHILD_DEVICE_CONFIG_SIZE) { 1634 DRM_DEBUG_KMS("Child device config size %u is too small.\n", 1635 defs->child_dev_size); 1636 return; 1637 } 1638 1639 /* get the number of child device */ 1640 child_device_num = (block_size - sizeof(*defs)) / defs->child_dev_size; 1641 count = 0; 1642 /* get the number of child device that is present */ 1643 for (i = 0; i < child_device_num; i++) { 1644 child = child_device_ptr(defs, i); 1645 if (!child->device_type) 1646 continue; 1647 count++; 1648 } 1649 if (!count) { 1650 DRM_DEBUG_KMS("no child dev is parsed from VBT\n"); 1651 return; 1652 } 1653 dev_priv->vbt.child_dev = kcalloc(count, sizeof(*child), GFP_KERNEL); 1654 if (!dev_priv->vbt.child_dev) { 1655 DRM_DEBUG_KMS("No memory space for child device\n"); 1656 return; 1657 } 1658 1659 dev_priv->vbt.child_dev_num = count; 1660 count = 0; 1661 for (i = 0; i < child_device_num; i++) { 1662 child = child_device_ptr(defs, i); 1663 if (!child->device_type) 1664 continue; 1665 1666 DRM_DEBUG_KMS("Found VBT child device with type 0x%x\n", 1667 child->device_type); 1668 1669 /* 1670 * Copy as much as we know (sizeof) and is available 1671 * (child_dev_size) of the child device. Accessing the data must 1672 * depend on VBT version. 1673 */ 1674 memcpy(dev_priv->vbt.child_dev + count, child, 1675 min_t(size_t, defs->child_dev_size, sizeof(*child))); 1676 count++; 1677 } 1678 } 1679 1680 /* Common defaults which may be overridden by VBT. */ 1681 static void 1682 init_vbt_defaults(struct drm_i915_private *dev_priv) 1683 { 1684 enum port port; 1685 1686 dev_priv->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC; 1687 1688 /* Default to having backlight */ 1689 dev_priv->vbt.backlight.present = true; 1690 1691 /* LFP panel data */ 1692 dev_priv->vbt.lvds_dither = 1; 1693 1694 /* SDVO panel data */ 1695 dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; 1696 1697 /* general features */ 1698 dev_priv->vbt.int_tv_support = 1; 1699 dev_priv->vbt.int_crt_support = 1; 1700 1701 /* driver features */ 1702 dev_priv->vbt.int_lvds_support = 1; 1703 1704 /* Default to using SSC */ 1705 dev_priv->vbt.lvds_use_ssc = 1; 1706 /* 1707 * Core/SandyBridge/IvyBridge use alternative (120MHz) reference 1708 * clock for LVDS. 1709 */ 1710 dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv, 1711 !HAS_PCH_SPLIT(dev_priv)); 1712 DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq); 1713 1714 for (port = PORT_A; port < I915_MAX_PORTS; port++) { 1715 struct ddi_vbt_port_info *info = 1716 &dev_priv->vbt.ddi_port_info[port]; 1717 1718 info->hdmi_level_shift = HDMI_LEVEL_SHIFT_UNKNOWN; 1719 } 1720 } 1721 1722 /* Defaults to initialize only if there is no VBT. */ 1723 static void 1724 init_vbt_missing_defaults(struct drm_i915_private *dev_priv) 1725 { 1726 enum port port; 1727 1728 for (port = PORT_A; port < I915_MAX_PORTS; port++) { 1729 struct ddi_vbt_port_info *info = 1730 &dev_priv->vbt.ddi_port_info[port]; 1731 enum phy phy = intel_port_to_phy(dev_priv, port); 1732 1733 /* 1734 * VBT has the TypeC mode (native,TBT/USB) and we don't want 1735 * to detect it. 1736 */ 1737 if (intel_phy_is_tc(dev_priv, phy)) 1738 continue; 1739 1740 info->supports_dvi = (port != PORT_A && port != PORT_E); 1741 info->supports_hdmi = info->supports_dvi; 1742 info->supports_dp = (port != PORT_E); 1743 info->supports_edp = (port == PORT_A); 1744 } 1745 } 1746 1747 static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt) 1748 { 1749 const void *_vbt = vbt; 1750 1751 return _vbt + vbt->bdb_offset; 1752 } 1753 1754 /** 1755 * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT 1756 * @buf: pointer to a buffer to validate 1757 * @size: size of the buffer 1758 * 1759 * Returns true on valid VBT. 1760 */ 1761 bool intel_bios_is_valid_vbt(const void *buf, size_t size) 1762 { 1763 const struct vbt_header *vbt = buf; 1764 const struct bdb_header *bdb; 1765 1766 if (!vbt) 1767 return false; 1768 1769 if (sizeof(struct vbt_header) > size) { 1770 DRM_DEBUG_DRIVER("VBT header incomplete\n"); 1771 return false; 1772 } 1773 1774 if (memcmp(vbt->signature, "$VBT", 4)) { 1775 DRM_DEBUG_DRIVER("VBT invalid signature\n"); 1776 return false; 1777 } 1778 1779 if (range_overflows_t(size_t, 1780 vbt->bdb_offset, 1781 sizeof(struct bdb_header), 1782 size)) { 1783 DRM_DEBUG_DRIVER("BDB header incomplete\n"); 1784 return false; 1785 } 1786 1787 bdb = get_bdb_header(vbt); 1788 if (range_overflows_t(size_t, vbt->bdb_offset, bdb->bdb_size, size)) { 1789 DRM_DEBUG_DRIVER("BDB incomplete\n"); 1790 return false; 1791 } 1792 1793 return vbt; 1794 } 1795 1796 static const struct vbt_header *find_vbt(void __iomem *bios, size_t size) 1797 { 1798 size_t i; 1799 1800 /* Scour memory looking for the VBT signature. */ 1801 for (i = 0; i + 4 < size; i++) { 1802 void *vbt; 1803 1804 if (ioread32(bios + i) != *((const u32 *) "$VBT")) 1805 continue; 1806 1807 /* 1808 * This is the one place where we explicitly discard the address 1809 * space (__iomem) of the BIOS/VBT. 1810 */ 1811 vbt = (void __force *) bios + i; 1812 if (intel_bios_is_valid_vbt(vbt, size - i)) 1813 return vbt; 1814 1815 break; 1816 } 1817 1818 return NULL; 1819 } 1820 1821 /** 1822 * intel_bios_init - find VBT and initialize settings from the BIOS 1823 * @dev_priv: i915 device instance 1824 * 1825 * Parse and initialize settings from the Video BIOS Tables (VBT). If the VBT 1826 * was not found in ACPI OpRegion, try to find it in PCI ROM first. Also 1827 * initialize some defaults if the VBT is not present at all. 1828 */ 1829 void intel_bios_init(struct drm_i915_private *dev_priv) 1830 { 1831 struct pci_dev *pdev = dev_priv->drm.pdev; 1832 const struct vbt_header *vbt = dev_priv->opregion.vbt; 1833 const struct bdb_header *bdb; 1834 u8 __iomem *bios = NULL; 1835 1836 if (!HAS_DISPLAY(dev_priv)) { 1837 DRM_DEBUG_KMS("Skipping VBT init due to disabled display.\n"); 1838 return; 1839 } 1840 1841 init_vbt_defaults(dev_priv); 1842 1843 /* If the OpRegion does not have VBT, look in PCI ROM. */ 1844 if (!vbt) { 1845 size_t size; 1846 1847 bios = pci_map_rom(pdev, &size); 1848 if (!bios) 1849 goto out; 1850 1851 vbt = find_vbt(bios, size); 1852 if (!vbt) 1853 goto out; 1854 1855 DRM_DEBUG_KMS("Found valid VBT in PCI ROM\n"); 1856 } 1857 1858 bdb = get_bdb_header(vbt); 1859 1860 DRM_DEBUG_KMS("VBT signature \"%.*s\", BDB version %d\n", 1861 (int)sizeof(vbt->signature), vbt->signature, bdb->version); 1862 1863 /* Grab useful general definitions */ 1864 parse_general_features(dev_priv, bdb); 1865 parse_general_definitions(dev_priv, bdb); 1866 parse_lfp_panel_data(dev_priv, bdb); 1867 parse_lfp_backlight(dev_priv, bdb); 1868 parse_sdvo_panel_data(dev_priv, bdb); 1869 parse_driver_features(dev_priv, bdb); 1870 parse_edp(dev_priv, bdb); 1871 parse_psr(dev_priv, bdb); 1872 parse_mipi_config(dev_priv, bdb); 1873 parse_mipi_sequence(dev_priv, bdb); 1874 1875 /* Further processing on pre-parsed data */ 1876 parse_sdvo_device_mapping(dev_priv, bdb->version); 1877 parse_ddi_ports(dev_priv, bdb->version); 1878 1879 out: 1880 if (!vbt) { 1881 DRM_INFO("Failed to find VBIOS tables (VBT)\n"); 1882 init_vbt_missing_defaults(dev_priv); 1883 } 1884 1885 if (bios) 1886 pci_unmap_rom(pdev, bios); 1887 } 1888 1889 /** 1890 * intel_bios_driver_remove - Free any resources allocated by intel_bios_init() 1891 * @dev_priv: i915 device instance 1892 */ 1893 void intel_bios_driver_remove(struct drm_i915_private *dev_priv) 1894 { 1895 kfree(dev_priv->vbt.child_dev); 1896 dev_priv->vbt.child_dev = NULL; 1897 dev_priv->vbt.child_dev_num = 0; 1898 kfree(dev_priv->vbt.sdvo_lvds_vbt_mode); 1899 dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; 1900 kfree(dev_priv->vbt.lfp_lvds_vbt_mode); 1901 dev_priv->vbt.lfp_lvds_vbt_mode = NULL; 1902 kfree(dev_priv->vbt.dsi.data); 1903 dev_priv->vbt.dsi.data = NULL; 1904 kfree(dev_priv->vbt.dsi.pps); 1905 dev_priv->vbt.dsi.pps = NULL; 1906 kfree(dev_priv->vbt.dsi.config); 1907 dev_priv->vbt.dsi.config = NULL; 1908 kfree(dev_priv->vbt.dsi.deassert_seq); 1909 dev_priv->vbt.dsi.deassert_seq = NULL; 1910 } 1911 1912 /** 1913 * intel_bios_is_tv_present - is integrated TV present in VBT 1914 * @dev_priv: i915 device instance 1915 * 1916 * Return true if TV is present. If no child devices were parsed from VBT, 1917 * assume TV is present. 1918 */ 1919 bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv) 1920 { 1921 const struct child_device_config *child; 1922 int i; 1923 1924 if (!dev_priv->vbt.int_tv_support) 1925 return false; 1926 1927 if (!dev_priv->vbt.child_dev_num) 1928 return true; 1929 1930 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { 1931 child = dev_priv->vbt.child_dev + i; 1932 /* 1933 * If the device type is not TV, continue. 1934 */ 1935 switch (child->device_type) { 1936 case DEVICE_TYPE_INT_TV: 1937 case DEVICE_TYPE_TV: 1938 case DEVICE_TYPE_TV_SVIDEO_COMPOSITE: 1939 break; 1940 default: 1941 continue; 1942 } 1943 /* Only when the addin_offset is non-zero, it is regarded 1944 * as present. 1945 */ 1946 if (child->addin_offset) 1947 return true; 1948 } 1949 1950 return false; 1951 } 1952 1953 /** 1954 * intel_bios_is_lvds_present - is LVDS present in VBT 1955 * @dev_priv: i915 device instance 1956 * @i2c_pin: i2c pin for LVDS if present 1957 * 1958 * Return true if LVDS is present. If no child devices were parsed from VBT, 1959 * assume LVDS is present. 1960 */ 1961 bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin) 1962 { 1963 const struct child_device_config *child; 1964 int i; 1965 1966 if (!dev_priv->vbt.child_dev_num) 1967 return true; 1968 1969 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { 1970 child = dev_priv->vbt.child_dev + i; 1971 1972 /* If the device type is not LFP, continue. 1973 * We have to check both the new identifiers as well as the 1974 * old for compatibility with some BIOSes. 1975 */ 1976 if (child->device_type != DEVICE_TYPE_INT_LFP && 1977 child->device_type != DEVICE_TYPE_LFP) 1978 continue; 1979 1980 if (intel_gmbus_is_valid_pin(dev_priv, child->i2c_pin)) 1981 *i2c_pin = child->i2c_pin; 1982 1983 /* However, we cannot trust the BIOS writers to populate 1984 * the VBT correctly. Since LVDS requires additional 1985 * information from AIM blocks, a non-zero addin offset is 1986 * a good indicator that the LVDS is actually present. 1987 */ 1988 if (child->addin_offset) 1989 return true; 1990 1991 /* But even then some BIOS writers perform some black magic 1992 * and instantiate the device without reference to any 1993 * additional data. Trust that if the VBT was written into 1994 * the OpRegion then they have validated the LVDS's existence. 1995 */ 1996 if (dev_priv->opregion.vbt) 1997 return true; 1998 } 1999 2000 return false; 2001 } 2002 2003 /** 2004 * intel_bios_is_port_present - is the specified digital port present 2005 * @dev_priv: i915 device instance 2006 * @port: port to check 2007 * 2008 * Return true if the device in %port is present. 2009 */ 2010 bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port) 2011 { 2012 const struct child_device_config *child; 2013 static const struct { 2014 u16 dp, hdmi; 2015 } port_mapping[] = { 2016 [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, 2017 [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, 2018 [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, 2019 [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, 2020 [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, }, 2021 }; 2022 int i; 2023 2024 if (HAS_DDI(dev_priv)) { 2025 const struct ddi_vbt_port_info *port_info = 2026 &dev_priv->vbt.ddi_port_info[port]; 2027 2028 return port_info->supports_dp || 2029 port_info->supports_dvi || 2030 port_info->supports_hdmi; 2031 } 2032 2033 /* FIXME maybe deal with port A as well? */ 2034 if (WARN_ON(port == PORT_A) || port >= ARRAY_SIZE(port_mapping)) 2035 return false; 2036 2037 if (!dev_priv->vbt.child_dev_num) 2038 return false; 2039 2040 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { 2041 child = dev_priv->vbt.child_dev + i; 2042 2043 if ((child->dvo_port == port_mapping[port].dp || 2044 child->dvo_port == port_mapping[port].hdmi) && 2045 (child->device_type & (DEVICE_TYPE_TMDS_DVI_SIGNALING | 2046 DEVICE_TYPE_DISPLAYPORT_OUTPUT))) 2047 return true; 2048 } 2049 2050 return false; 2051 } 2052 2053 /** 2054 * intel_bios_is_port_edp - is the device in given port eDP 2055 * @dev_priv: i915 device instance 2056 * @port: port to check 2057 * 2058 * Return true if the device in %port is eDP. 2059 */ 2060 bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port) 2061 { 2062 const struct child_device_config *child; 2063 static const short port_mapping[] = { 2064 [PORT_B] = DVO_PORT_DPB, 2065 [PORT_C] = DVO_PORT_DPC, 2066 [PORT_D] = DVO_PORT_DPD, 2067 [PORT_E] = DVO_PORT_DPE, 2068 [PORT_F] = DVO_PORT_DPF, 2069 }; 2070 int i; 2071 2072 if (HAS_DDI(dev_priv)) 2073 return dev_priv->vbt.ddi_port_info[port].supports_edp; 2074 2075 if (!dev_priv->vbt.child_dev_num) 2076 return false; 2077 2078 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { 2079 child = dev_priv->vbt.child_dev + i; 2080 2081 if (child->dvo_port == port_mapping[port] && 2082 (child->device_type & DEVICE_TYPE_eDP_BITS) == 2083 (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS)) 2084 return true; 2085 } 2086 2087 return false; 2088 } 2089 2090 static bool child_dev_is_dp_dual_mode(const struct child_device_config *child, 2091 enum port port) 2092 { 2093 static const struct { 2094 u16 dp, hdmi; 2095 } port_mapping[] = { 2096 /* 2097 * Buggy VBTs may declare DP ports as having 2098 * HDMI type dvo_port :( So let's check both. 2099 */ 2100 [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, 2101 [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, 2102 [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, 2103 [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, 2104 [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, }, 2105 }; 2106 2107 if (port == PORT_A || port >= ARRAY_SIZE(port_mapping)) 2108 return false; 2109 2110 if ((child->device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) != 2111 (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) 2112 return false; 2113 2114 if (child->dvo_port == port_mapping[port].dp) 2115 return true; 2116 2117 /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */ 2118 if (child->dvo_port == port_mapping[port].hdmi && 2119 child->aux_channel != 0) 2120 return true; 2121 2122 return false; 2123 } 2124 2125 bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, 2126 enum port port) 2127 { 2128 const struct child_device_config *child; 2129 int i; 2130 2131 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { 2132 child = dev_priv->vbt.child_dev + i; 2133 2134 if (child_dev_is_dp_dual_mode(child, port)) 2135 return true; 2136 } 2137 2138 return false; 2139 } 2140 2141 /** 2142 * intel_bios_is_dsi_present - is DSI present in VBT 2143 * @dev_priv: i915 device instance 2144 * @port: port for DSI if present 2145 * 2146 * Return true if DSI is present, and return the port in %port. 2147 */ 2148 bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, 2149 enum port *port) 2150 { 2151 const struct child_device_config *child; 2152 u8 dvo_port; 2153 int i; 2154 2155 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { 2156 child = dev_priv->vbt.child_dev + i; 2157 2158 if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT)) 2159 continue; 2160 2161 dvo_port = child->dvo_port; 2162 2163 if (dvo_port == DVO_PORT_MIPIA || 2164 (dvo_port == DVO_PORT_MIPIB && INTEL_GEN(dev_priv) >= 11) || 2165 (dvo_port == DVO_PORT_MIPIC && INTEL_GEN(dev_priv) < 11)) { 2166 if (port) 2167 *port = dvo_port - DVO_PORT_MIPIA; 2168 return true; 2169 } else if (dvo_port == DVO_PORT_MIPIB || 2170 dvo_port == DVO_PORT_MIPIC || 2171 dvo_port == DVO_PORT_MIPID) { 2172 DRM_DEBUG_KMS("VBT has unsupported DSI port %c\n", 2173 port_name(dvo_port - DVO_PORT_MIPIA)); 2174 } 2175 } 2176 2177 return false; 2178 } 2179 2180 /** 2181 * intel_bios_is_port_hpd_inverted - is HPD inverted for %port 2182 * @i915: i915 device instance 2183 * @port: port to check 2184 * 2185 * Return true if HPD should be inverted for %port. 2186 */ 2187 bool 2188 intel_bios_is_port_hpd_inverted(const struct drm_i915_private *i915, 2189 enum port port) 2190 { 2191 const struct child_device_config *child = 2192 i915->vbt.ddi_port_info[port].child; 2193 2194 if (WARN_ON_ONCE(!IS_GEN9_LP(i915))) 2195 return false; 2196 2197 return child && child->hpd_invert; 2198 } 2199 2200 /** 2201 * intel_bios_is_lspcon_present - if LSPCON is attached on %port 2202 * @i915: i915 device instance 2203 * @port: port to check 2204 * 2205 * Return true if LSPCON is present on this port 2206 */ 2207 bool 2208 intel_bios_is_lspcon_present(const struct drm_i915_private *i915, 2209 enum port port) 2210 { 2211 const struct child_device_config *child = 2212 i915->vbt.ddi_port_info[port].child; 2213 2214 return HAS_LSPCON(i915) && child && child->lspcon; 2215 } 2216 2217 enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv, 2218 enum port port) 2219 { 2220 const struct ddi_vbt_port_info *info = 2221 &dev_priv->vbt.ddi_port_info[port]; 2222 enum aux_ch aux_ch; 2223 2224 if (!info->alternate_aux_channel) { 2225 aux_ch = (enum aux_ch)port; 2226 2227 DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n", 2228 aux_ch_name(aux_ch), port_name(port)); 2229 return aux_ch; 2230 } 2231 2232 switch (info->alternate_aux_channel) { 2233 case DP_AUX_A: 2234 aux_ch = AUX_CH_A; 2235 break; 2236 case DP_AUX_B: 2237 aux_ch = AUX_CH_B; 2238 break; 2239 case DP_AUX_C: 2240 aux_ch = AUX_CH_C; 2241 break; 2242 case DP_AUX_D: 2243 aux_ch = AUX_CH_D; 2244 break; 2245 case DP_AUX_E: 2246 aux_ch = AUX_CH_E; 2247 break; 2248 case DP_AUX_F: 2249 aux_ch = AUX_CH_F; 2250 break; 2251 default: 2252 MISSING_CASE(info->alternate_aux_channel); 2253 aux_ch = AUX_CH_A; 2254 break; 2255 } 2256 2257 DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n", 2258 aux_ch_name(aux_ch), port_name(port)); 2259 2260 return aux_ch; 2261 } 2262