1 /* SPDX-License-Identifier: MIT */ 2 /* 3 * Copyright © 2022 Intel Corporation 4 */ 5 6 #ifndef __INTEL_BACKLIGHT_REGS_H__ 7 #define __INTEL_BACKLIGHT_REGS_H__ 8 9 #include "intel_display_reg_defs.h" 10 11 #define _VLV_BLC_PWM_CTL2_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61250) 12 #define _VLV_BLC_PWM_CTL2_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61350) 13 #define VLV_BLC_PWM_CTL2(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \ 14 _VLV_BLC_PWM_CTL2_B) 15 16 #define _VLV_BLC_PWM_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61254) 17 #define _VLV_BLC_PWM_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61354) 18 #define VLV_BLC_PWM_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL_A, \ 19 _VLV_BLC_PWM_CTL_B) 20 21 #define _VLV_BLC_HIST_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61260) 22 #define _VLV_BLC_HIST_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61360) 23 #define VLV_BLC_HIST_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_HIST_CTL_A, \ 24 _VLV_BLC_HIST_CTL_B) 25 26 /* Backlight control */ 27 #define BLC_PWM_CTL2 _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61250) /* 965+ only */ 28 #define BLM_PWM_ENABLE (1 << 31) 29 #define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ 30 #define BLM_PIPE_SELECT (1 << 29) 31 #define BLM_PIPE_SELECT_IVB (3 << 29) 32 #define BLM_PIPE_A (0 << 29) 33 #define BLM_PIPE_B (1 << 29) 34 #define BLM_PIPE_C (2 << 29) /* ivb + */ 35 #define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */ 36 #define BLM_TRANSCODER_B BLM_PIPE_B 37 #define BLM_TRANSCODER_C BLM_PIPE_C 38 #define BLM_TRANSCODER_EDP (3 << 29) 39 #define BLM_PIPE(pipe) ((pipe) << 29) 40 #define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ 41 #define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) 42 #define BLM_PHASE_IN_ENABLE (1 << 25) 43 #define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) 44 #define BLM_PHASE_IN_TIME_BASE_SHIFT (16) 45 #define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) 46 #define BLM_PHASE_IN_COUNT_SHIFT (8) 47 #define BLM_PHASE_IN_COUNT_MASK (0xff << 8) 48 #define BLM_PHASE_IN_INCR_SHIFT (0) 49 #define BLM_PHASE_IN_INCR_MASK (0xff << 0) 50 #define BLC_PWM_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61254) 51 /* 52 * This is the most significant 15 bits of the number of backlight cycles in a 53 * complete cycle of the modulated backlight control. 54 * 55 * The actual value is this field multiplied by two. 56 */ 57 #define BACKLIGHT_MODULATION_FREQ_SHIFT (17) 58 #define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) 59 #define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ 60 /* 61 * This is the number of cycles out of the backlight modulation cycle for which 62 * the backlight is on. 63 * 64 * This field must be no greater than the number of cycles in the complete 65 * backlight modulation cycle. 66 */ 67 #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) 68 #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) 69 #define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) 70 #define BLM_POLARITY_PNV (1 << 0) /* pnv only */ 71 72 #define BLC_HIST_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61260) 73 #define BLM_HISTOGRAM_ENABLE (1 << 31) 74 75 /* New registers for PCH-split platforms. Safe where new bits show up, the 76 * register layout machtes with gen4 BLC_PWM_CTL[12]. */ 77 #define BLC_PWM_CPU_CTL2 _MMIO(0x48250) 78 #define BLC_PWM_CPU_CTL _MMIO(0x48254) 79 80 #define HSW_BLC_PWM2_CTL _MMIO(0x48350) 81 82 /* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is 83 * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */ 84 #define BLC_PWM_PCH_CTL1 _MMIO(0xc8250) 85 #define BLM_PCH_PWM_ENABLE (1 << 31) 86 #define BLM_PCH_OVERRIDE_ENABLE (1 << 30) 87 #define BLM_PCH_POLARITY (1 << 29) 88 #define BLC_PWM_PCH_CTL2 _MMIO(0xc8254) 89 90 /* BXT backlight register definition. */ 91 #define _BXT_BLC_PWM_CTL1 0xC8250 92 #define BXT_BLC_PWM_ENABLE (1 << 31) 93 #define BXT_BLC_PWM_POLARITY (1 << 29) 94 #define _BXT_BLC_PWM_FREQ1 0xC8254 95 #define _BXT_BLC_PWM_DUTY1 0xC8258 96 97 #define _BXT_BLC_PWM_CTL2 0xC8350 98 #define _BXT_BLC_PWM_FREQ2 0xC8354 99 #define _BXT_BLC_PWM_DUTY2 0xC8358 100 101 #define BXT_BLC_PWM_CTL(controller) _MMIO_PIPE(controller, \ 102 _BXT_BLC_PWM_CTL1, _BXT_BLC_PWM_CTL2) 103 #define BXT_BLC_PWM_FREQ(controller) _MMIO_PIPE(controller, \ 104 _BXT_BLC_PWM_FREQ1, _BXT_BLC_PWM_FREQ2) 105 #define BXT_BLC_PWM_DUTY(controller) _MMIO_PIPE(controller, \ 106 _BXT_BLC_PWM_DUTY1, _BXT_BLC_PWM_DUTY2) 107 108 /* Utility pin */ 109 #define UTIL_PIN_CTL _MMIO(0x48400) 110 #define UTIL_PIN_ENABLE (1 << 31) 111 #define UTIL_PIN_PIPE_MASK (3 << 29) 112 #define UTIL_PIN_PIPE(x) ((x) << 29) 113 #define UTIL_PIN_MODE_MASK (0xf << 24) 114 #define UTIL_PIN_MODE_DATA (0 << 24) 115 #define UTIL_PIN_MODE_PWM (1 << 24) 116 #define UTIL_PIN_MODE_VBLANK (4 << 24) 117 #define UTIL_PIN_MODE_VSYNC (5 << 24) 118 #define UTIL_PIN_MODE_EYE_LEVEL (8 << 24) 119 #define UTIL_PIN_OUTPUT_DATA (1 << 23) 120 #define UTIL_PIN_POLARITY (1 << 22) 121 #define UTIL_PIN_DIRECTION_INPUT (1 << 19) 122 #define UTIL_PIN_INPUT_DATA (1 << 16) 123 124 #endif /* __INTEL_BACKLIGHT_REGS_H__ */ 125