1config DRM_I915_FENCE_TIMEOUT
2	int "Timeout for unsignaled foreign fences (ms, jiffy granularity)"
3	default 10000 # milliseconds
4	help
5	  When listening to a foreign fence, we install a supplementary timer
6	  to ensure that we are always signaled and our userspace is able to
7	  make forward progress. This value specifies the timeout used for an
8	  unsignaled foreign fence.
9
10	  May be 0 to disable the timeout, and rely on the foreign fence being
11	  eventually signaled.
12
13config DRM_I915_USERFAULT_AUTOSUSPEND
14	int "Runtime autosuspend delay for userspace GGTT mmaps (ms)"
15	default 250 # milliseconds
16	help
17	  On runtime suspend, as we suspend the device, we have to revoke
18	  userspace GGTT mmaps and force userspace to take a pagefault on
19	  their next access. The revocation and subsequent recreation of
20	  the GGTT mmap can be very slow and so we impose a small hysteris
21	  that complements the runtime-pm autosuspend and provides a lower
22	  floor on the autosuspend delay.
23
24	  May be 0 to disable the extra delay and solely use the device level
25	  runtime pm autosuspend delay tunable.
26
27config DRM_I915_HEARTBEAT_INTERVAL
28	int "Interval between heartbeat pulses (ms)"
29	default 2500 # milliseconds
30	help
31	  The driver sends a periodic heartbeat down all active engines to
32	  check the health of the GPU and undertake regular house-keeping of
33	  internal driver state.
34
35	  This is adjustable via
36	  /sys/class/drm/card?/engine/*/heartbeat_interval_ms
37
38	  May be 0 to disable heartbeats and therefore disable automatic GPU
39	  hang detection.
40
41config DRM_I915_PREEMPT_TIMEOUT
42	int "Preempt timeout (ms, jiffy granularity)"
43	default 640 # milliseconds
44	help
45	  How long to wait (in milliseconds) for a preemption event to occur
46	  when submitting a new context via execlists. If the current context
47	  does not hit an arbitration point and yield to HW before the timer
48	  expires, the HW will be reset to allow the more important context
49	  to execute.
50
51	  This is adjustable via
52	  /sys/class/drm/card?/engine/*/preempt_timeout_ms
53
54	  May be 0 to disable the timeout.
55
56	  The compiled in default may get overridden at driver probe time on
57	  certain platforms and certain engines which will be reflected in the
58	  sysfs control.
59
60config DRM_I915_MAX_REQUEST_BUSYWAIT
61	int "Busywait for request completion limit (ns)"
62	default 8000 # nanoseconds
63	help
64	  Before sleeping waiting for a request (GPU operation) to complete,
65	  we may spend some time polling for its completion. As the IRQ may
66	  take a non-negligible time to setup, we do a short spin first to
67	  check if the request will complete in the time it would have taken
68	  us to enable the interrupt.
69
70	  This is adjustable via
71	  /sys/class/drm/card?/engine/*/max_busywait_duration_ns
72
73	  May be 0 to disable the initial spin. In practice, we estimate
74	  the cost of enabling the interrupt (if currently disabled) to be
75	  a few microseconds.
76
77config DRM_I915_STOP_TIMEOUT
78	int "How long to wait for an engine to quiesce gracefully before reset (ms)"
79	default 100 # milliseconds
80	help
81	  By stopping submission and sleeping for a short time before resetting
82	  the GPU, we allow the innocent contexts also on the system to quiesce.
83	  It is then less likely for a hanging context to cause collateral
84	  damage as the system is reset in order to recover. The corollary is
85	  that the reset itself may take longer and so be more disruptive to
86	  interactive or low latency workloads.
87
88	  This is adjustable via
89	  /sys/class/drm/card?/engine/*/stop_timeout_ms
90
91config DRM_I915_TIMESLICE_DURATION
92	int "Scheduling quantum for userspace batches (ms, jiffy granularity)"
93	default 1 # milliseconds
94	help
95	  When two user batches of equal priority are executing, we will
96	  alternate execution of each batch to ensure forward progress of
97	  all users. This is necessary in some cases where there may be
98	  an implicit dependency between those batches that requires
99	  concurrent execution in order for them to proceed, e.g. they
100	  interact with each other via userspace semaphores. Each context
101	  is scheduled for execution for the timeslice duration, before
102	  switching to the next context.
103
104	  This is adjustable via
105	  /sys/class/drm/card?/engine/*/timeslice_duration_ms
106
107	  May be 0 to disable timeslicing.
108