1 /* Hisilicon Hibmc SoC drm driver 2 * 3 * Based on the bochs drm driver. 4 * 5 * Copyright (c) 2016 Huawei Limited. 6 * 7 * Author: 8 * Rongrong Zou <zourongrong@huawei.com> 9 * Rongrong Zou <zourongrong@gmail.com> 10 * Jianhua Li <lijianhua@huawei.com> 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2 of the License, or 15 * (at your option) any later version. 16 * 17 */ 18 19 #include <drm/drm_atomic.h> 20 #include <drm/drm_atomic_helper.h> 21 #include <drm/drm_crtc_helper.h> 22 #include <drm/drm_plane_helper.h> 23 24 #include "hibmc_drm_drv.h" 25 #include "hibmc_drm_regs.h" 26 27 struct hibmc_display_panel_pll { 28 unsigned long M; 29 unsigned long N; 30 unsigned long OD; 31 unsigned long POD; 32 }; 33 34 struct hibmc_dislay_pll_config { 35 unsigned long hdisplay; 36 unsigned long vdisplay; 37 u32 pll1_config_value; 38 u32 pll2_config_value; 39 }; 40 41 static const struct hibmc_dislay_pll_config hibmc_pll_table[] = { 42 {800, 600, CRT_PLL1_HS_40MHZ, CRT_PLL2_HS_40MHZ}, 43 {1024, 768, CRT_PLL1_HS_65MHZ, CRT_PLL2_HS_65MHZ}, 44 {1152, 864, CRT_PLL1_HS_80MHZ_1152, CRT_PLL2_HS_80MHZ}, 45 {1280, 768, CRT_PLL1_HS_80MHZ, CRT_PLL2_HS_80MHZ}, 46 {1280, 720, CRT_PLL1_HS_74MHZ, CRT_PLL2_HS_74MHZ}, 47 {1280, 960, CRT_PLL1_HS_108MHZ, CRT_PLL2_HS_108MHZ}, 48 {1280, 1024, CRT_PLL1_HS_108MHZ, CRT_PLL2_HS_108MHZ}, 49 {1600, 1200, CRT_PLL1_HS_162MHZ, CRT_PLL2_HS_162MHZ}, 50 {1920, 1080, CRT_PLL1_HS_148MHZ, CRT_PLL2_HS_148MHZ}, 51 {1920, 1200, CRT_PLL1_HS_193MHZ, CRT_PLL2_HS_193MHZ}, 52 }; 53 54 #define PADDING(align, data) (((data) + (align) - 1) & (~((align) - 1))) 55 56 static int hibmc_plane_atomic_check(struct drm_plane *plane, 57 struct drm_plane_state *state) 58 { 59 struct drm_framebuffer *fb = state->fb; 60 struct drm_crtc *crtc = state->crtc; 61 struct drm_crtc_state *crtc_state; 62 u32 src_w = state->src_w >> 16; 63 u32 src_h = state->src_h >> 16; 64 65 if (!crtc || !fb) 66 return 0; 67 68 crtc_state = drm_atomic_get_crtc_state(state->state, crtc); 69 if (IS_ERR(crtc_state)) 70 return PTR_ERR(crtc_state); 71 72 if (src_w != state->crtc_w || src_h != state->crtc_h) { 73 DRM_DEBUG_ATOMIC("scale not support\n"); 74 return -EINVAL; 75 } 76 77 if (state->crtc_x < 0 || state->crtc_y < 0) { 78 DRM_DEBUG_ATOMIC("crtc_x/y of drm_plane state is invalid\n"); 79 return -EINVAL; 80 } 81 82 if (state->crtc_x + state->crtc_w > 83 crtc_state->adjusted_mode.hdisplay || 84 state->crtc_y + state->crtc_h > 85 crtc_state->adjusted_mode.vdisplay) { 86 DRM_DEBUG_ATOMIC("visible portion of plane is invalid\n"); 87 return -EINVAL; 88 } 89 90 return 0; 91 } 92 93 static void hibmc_plane_atomic_update(struct drm_plane *plane, 94 struct drm_plane_state *old_state) 95 { 96 struct drm_plane_state *state = plane->state; 97 u32 reg; 98 int ret; 99 u64 gpu_addr = 0; 100 unsigned int line_l; 101 struct hibmc_drm_private *priv = plane->dev->dev_private; 102 struct hibmc_framebuffer *hibmc_fb; 103 struct hibmc_bo *bo; 104 105 if (!state->fb) 106 return; 107 108 hibmc_fb = to_hibmc_framebuffer(state->fb); 109 bo = gem_to_hibmc_bo(hibmc_fb->obj); 110 ret = ttm_bo_reserve(&bo->bo, true, false, NULL); 111 if (ret) { 112 DRM_ERROR("failed to reserve ttm_bo: %d", ret); 113 return; 114 } 115 116 ret = hibmc_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr); 117 ttm_bo_unreserve(&bo->bo); 118 if (ret) { 119 DRM_ERROR("failed to pin hibmc_bo: %d", ret); 120 return; 121 } 122 123 writel(gpu_addr, priv->mmio + HIBMC_CRT_FB_ADDRESS); 124 125 reg = state->fb->width * (state->fb->format->cpp[0]); 126 /* now line_pad is 16 */ 127 reg = PADDING(16, reg); 128 129 line_l = state->fb->width * state->fb->format->cpp[0]; 130 line_l = PADDING(16, line_l); 131 writel(HIBMC_FIELD(HIBMC_CRT_FB_WIDTH_WIDTH, reg) | 132 HIBMC_FIELD(HIBMC_CRT_FB_WIDTH_OFFS, line_l), 133 priv->mmio + HIBMC_CRT_FB_WIDTH); 134 135 /* SET PIXEL FORMAT */ 136 reg = readl(priv->mmio + HIBMC_CRT_DISP_CTL); 137 reg &= ~HIBMC_CRT_DISP_CTL_FORMAT_MASK; 138 reg |= HIBMC_FIELD(HIBMC_CRT_DISP_CTL_FORMAT, 139 state->fb->format->cpp[0] * 8 / 16); 140 writel(reg, priv->mmio + HIBMC_CRT_DISP_CTL); 141 } 142 143 static const u32 channel_formats1[] = { 144 DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_RGB888, 145 DRM_FORMAT_BGR888, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888, 146 DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_ARGB8888, 147 DRM_FORMAT_ABGR8888 148 }; 149 150 static struct drm_plane_funcs hibmc_plane_funcs = { 151 .update_plane = drm_atomic_helper_update_plane, 152 .disable_plane = drm_atomic_helper_disable_plane, 153 .destroy = drm_plane_cleanup, 154 .reset = drm_atomic_helper_plane_reset, 155 .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, 156 .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, 157 }; 158 159 static const struct drm_plane_helper_funcs hibmc_plane_helper_funcs = { 160 .atomic_check = hibmc_plane_atomic_check, 161 .atomic_update = hibmc_plane_atomic_update, 162 }; 163 164 static struct drm_plane *hibmc_plane_init(struct hibmc_drm_private *priv) 165 { 166 struct drm_device *dev = priv->dev; 167 struct drm_plane *plane; 168 int ret = 0; 169 170 plane = devm_kzalloc(dev->dev, sizeof(*plane), GFP_KERNEL); 171 if (!plane) { 172 DRM_ERROR("failed to alloc memory when init plane\n"); 173 return ERR_PTR(-ENOMEM); 174 } 175 /* 176 * plane init 177 * TODO: Now only support primary plane, overlay planes 178 * need to do. 179 */ 180 ret = drm_universal_plane_init(dev, plane, 1, &hibmc_plane_funcs, 181 channel_formats1, 182 ARRAY_SIZE(channel_formats1), 183 NULL, 184 DRM_PLANE_TYPE_PRIMARY, 185 NULL); 186 if (ret) { 187 DRM_ERROR("failed to init plane: %d\n", ret); 188 return ERR_PTR(ret); 189 } 190 191 drm_plane_helper_add(plane, &hibmc_plane_helper_funcs); 192 return plane; 193 } 194 195 static void hibmc_crtc_atomic_enable(struct drm_crtc *crtc, 196 struct drm_crtc_state *old_state) 197 { 198 unsigned int reg; 199 struct hibmc_drm_private *priv = crtc->dev->dev_private; 200 201 hibmc_set_power_mode(priv, HIBMC_PW_MODE_CTL_MODE_MODE0); 202 203 /* Enable display power gate & LOCALMEM power gate*/ 204 reg = readl(priv->mmio + HIBMC_CURRENT_GATE); 205 reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK; 206 reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK; 207 reg |= HIBMC_CURR_GATE_LOCALMEM(1); 208 reg |= HIBMC_CURR_GATE_DISPLAY(1); 209 hibmc_set_current_gate(priv, reg); 210 drm_crtc_vblank_on(crtc); 211 } 212 213 static void hibmc_crtc_atomic_disable(struct drm_crtc *crtc, 214 struct drm_crtc_state *old_state) 215 { 216 unsigned int reg; 217 struct hibmc_drm_private *priv = crtc->dev->dev_private; 218 219 drm_crtc_vblank_off(crtc); 220 221 hibmc_set_power_mode(priv, HIBMC_PW_MODE_CTL_MODE_SLEEP); 222 223 /* Enable display power gate & LOCALMEM power gate*/ 224 reg = readl(priv->mmio + HIBMC_CURRENT_GATE); 225 reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK; 226 reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK; 227 reg |= HIBMC_CURR_GATE_LOCALMEM(0); 228 reg |= HIBMC_CURR_GATE_DISPLAY(0); 229 hibmc_set_current_gate(priv, reg); 230 } 231 232 static unsigned int format_pll_reg(void) 233 { 234 unsigned int pllreg = 0; 235 struct hibmc_display_panel_pll pll = {0}; 236 237 /* 238 * Note that all PLL's have the same format. Here, 239 * we just use Panel PLL parameter to work out the bit 240 * fields in the register.On returning a 32 bit number, the value can 241 * be applied to any PLL in the calling function. 242 */ 243 pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_BYPASS, 0); 244 pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_POWER, 1); 245 pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_INPUT, 0); 246 pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_POD, pll.POD); 247 pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_OD, pll.OD); 248 pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_N, pll.N); 249 pllreg |= HIBMC_FIELD(HIBMC_PLL_CTRL_M, pll.M); 250 251 return pllreg; 252 } 253 254 static void set_vclock_hisilicon(struct drm_device *dev, unsigned long pll) 255 { 256 u32 val; 257 struct hibmc_drm_private *priv = dev->dev_private; 258 259 val = readl(priv->mmio + CRT_PLL1_HS); 260 val &= ~(CRT_PLL1_HS_OUTER_BYPASS(1)); 261 writel(val, priv->mmio + CRT_PLL1_HS); 262 263 val = CRT_PLL1_HS_INTER_BYPASS(1) | CRT_PLL1_HS_POWERON(1); 264 writel(val, priv->mmio + CRT_PLL1_HS); 265 266 writel(pll, priv->mmio + CRT_PLL1_HS); 267 268 usleep_range(1000, 2000); 269 270 val = pll & ~(CRT_PLL1_HS_POWERON(1)); 271 writel(val, priv->mmio + CRT_PLL1_HS); 272 273 usleep_range(1000, 2000); 274 275 val &= ~(CRT_PLL1_HS_INTER_BYPASS(1)); 276 writel(val, priv->mmio + CRT_PLL1_HS); 277 278 usleep_range(1000, 2000); 279 280 val |= CRT_PLL1_HS_OUTER_BYPASS(1); 281 writel(val, priv->mmio + CRT_PLL1_HS); 282 } 283 284 static void get_pll_config(unsigned long x, unsigned long y, 285 u32 *pll1, u32 *pll2) 286 { 287 int i; 288 int count = ARRAY_SIZE(hibmc_pll_table); 289 290 for (i = 0; i < count; i++) { 291 if (hibmc_pll_table[i].hdisplay == x && 292 hibmc_pll_table[i].vdisplay == y) { 293 *pll1 = hibmc_pll_table[i].pll1_config_value; 294 *pll2 = hibmc_pll_table[i].pll2_config_value; 295 return; 296 } 297 } 298 299 /* if found none, we use default value */ 300 *pll1 = CRT_PLL1_HS_25MHZ; 301 *pll2 = CRT_PLL2_HS_25MHZ; 302 } 303 304 /* 305 * This function takes care the extra registers and bit fields required to 306 * setup a mode in board. 307 * Explanation about Display Control register: 308 * FPGA only supports 7 predefined pixel clocks, and clock select is 309 * in bit 4:0 of new register 0x802a8. 310 */ 311 static unsigned int display_ctrl_adjust(struct drm_device *dev, 312 struct drm_display_mode *mode, 313 unsigned int ctrl) 314 { 315 unsigned long x, y; 316 u32 pll1; /* bit[31:0] of PLL */ 317 u32 pll2; /* bit[63:32] of PLL */ 318 struct hibmc_drm_private *priv = dev->dev_private; 319 320 x = mode->hdisplay; 321 y = mode->vdisplay; 322 323 get_pll_config(x, y, &pll1, &pll2); 324 writel(pll2, priv->mmio + CRT_PLL2_HS); 325 set_vclock_hisilicon(dev, pll1); 326 327 /* 328 * Hisilicon has to set up the top-left and bottom-right 329 * registers as well. 330 * Note that normal chip only use those two register for 331 * auto-centering mode. 332 */ 333 writel(HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_TL_TOP, 0) | 334 HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_TL_LEFT, 0), 335 priv->mmio + HIBMC_CRT_AUTO_CENTERING_TL); 336 337 writel(HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM, y - 1) | 338 HIBMC_FIELD(HIBMC_CRT_AUTO_CENTERING_BR_RIGHT, x - 1), 339 priv->mmio + HIBMC_CRT_AUTO_CENTERING_BR); 340 341 /* 342 * Assume common fields in ctrl have been properly set before 343 * calling this function. 344 * This function only sets the extra fields in ctrl. 345 */ 346 347 /* Set bit 25 of display controller: Select CRT or VGA clock */ 348 ctrl &= ~HIBMC_CRT_DISP_CTL_CRTSELECT_MASK; 349 ctrl &= ~HIBMC_CRT_DISP_CTL_CLOCK_PHASE_MASK; 350 351 ctrl |= HIBMC_CRT_DISP_CTL_CRTSELECT(HIBMC_CRTSELECT_CRT); 352 353 /* clock_phase_polarity is 0 */ 354 ctrl |= HIBMC_CRT_DISP_CTL_CLOCK_PHASE(0); 355 356 writel(ctrl, priv->mmio + HIBMC_CRT_DISP_CTL); 357 358 return ctrl; 359 } 360 361 static void hibmc_crtc_mode_set_nofb(struct drm_crtc *crtc) 362 { 363 unsigned int val; 364 struct drm_display_mode *mode = &crtc->state->mode; 365 struct drm_device *dev = crtc->dev; 366 struct hibmc_drm_private *priv = dev->dev_private; 367 int width = mode->hsync_end - mode->hsync_start; 368 int height = mode->vsync_end - mode->vsync_start; 369 370 writel(format_pll_reg(), priv->mmio + HIBMC_CRT_PLL_CTRL); 371 writel(HIBMC_FIELD(HIBMC_CRT_HORZ_TOTAL_TOTAL, mode->htotal - 1) | 372 HIBMC_FIELD(HIBMC_CRT_HORZ_TOTAL_DISP_END, mode->hdisplay - 1), 373 priv->mmio + HIBMC_CRT_HORZ_TOTAL); 374 375 writel(HIBMC_FIELD(HIBMC_CRT_HORZ_SYNC_WIDTH, width) | 376 HIBMC_FIELD(HIBMC_CRT_HORZ_SYNC_START, mode->hsync_start - 1), 377 priv->mmio + HIBMC_CRT_HORZ_SYNC); 378 379 writel(HIBMC_FIELD(HIBMC_CRT_VERT_TOTAL_TOTAL, mode->vtotal - 1) | 380 HIBMC_FIELD(HIBMC_CRT_VERT_TOTAL_DISP_END, mode->vdisplay - 1), 381 priv->mmio + HIBMC_CRT_VERT_TOTAL); 382 383 writel(HIBMC_FIELD(HIBMC_CRT_VERT_SYNC_HEIGHT, height) | 384 HIBMC_FIELD(HIBMC_CRT_VERT_SYNC_START, mode->vsync_start - 1), 385 priv->mmio + HIBMC_CRT_VERT_SYNC); 386 387 val = HIBMC_FIELD(HIBMC_CRT_DISP_CTL_VSYNC_PHASE, 0); 388 val |= HIBMC_FIELD(HIBMC_CRT_DISP_CTL_HSYNC_PHASE, 0); 389 val |= HIBMC_CRT_DISP_CTL_TIMING(1); 390 val |= HIBMC_CRT_DISP_CTL_PLANE(1); 391 392 display_ctrl_adjust(dev, mode, val); 393 } 394 395 static void hibmc_crtc_atomic_begin(struct drm_crtc *crtc, 396 struct drm_crtc_state *old_state) 397 { 398 unsigned int reg; 399 struct drm_device *dev = crtc->dev; 400 struct hibmc_drm_private *priv = dev->dev_private; 401 402 hibmc_set_power_mode(priv, HIBMC_PW_MODE_CTL_MODE_MODE0); 403 404 /* Enable display power gate & LOCALMEM power gate*/ 405 reg = readl(priv->mmio + HIBMC_CURRENT_GATE); 406 reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK; 407 reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK; 408 reg |= HIBMC_CURR_GATE_DISPLAY(1); 409 reg |= HIBMC_CURR_GATE_LOCALMEM(1); 410 hibmc_set_current_gate(priv, reg); 411 412 /* We can add more initialization as needed. */ 413 } 414 415 static void hibmc_crtc_atomic_flush(struct drm_crtc *crtc, 416 struct drm_crtc_state *old_state) 417 418 { 419 unsigned long flags; 420 421 spin_lock_irqsave(&crtc->dev->event_lock, flags); 422 if (crtc->state->event) 423 drm_crtc_send_vblank_event(crtc, crtc->state->event); 424 crtc->state->event = NULL; 425 spin_unlock_irqrestore(&crtc->dev->event_lock, flags); 426 } 427 428 static int hibmc_crtc_enable_vblank(struct drm_crtc *crtc) 429 { 430 struct hibmc_drm_private *priv = crtc->dev->dev_private; 431 432 writel(HIBMC_RAW_INTERRUPT_EN_VBLANK(1), 433 priv->mmio + HIBMC_RAW_INTERRUPT_EN); 434 435 return 0; 436 } 437 438 static void hibmc_crtc_disable_vblank(struct drm_crtc *crtc) 439 { 440 struct hibmc_drm_private *priv = crtc->dev->dev_private; 441 442 writel(HIBMC_RAW_INTERRUPT_EN_VBLANK(0), 443 priv->mmio + HIBMC_RAW_INTERRUPT_EN); 444 } 445 446 static const struct drm_crtc_funcs hibmc_crtc_funcs = { 447 .page_flip = drm_atomic_helper_page_flip, 448 .set_config = drm_atomic_helper_set_config, 449 .destroy = drm_crtc_cleanup, 450 .reset = drm_atomic_helper_crtc_reset, 451 .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, 452 .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, 453 .enable_vblank = hibmc_crtc_enable_vblank, 454 .disable_vblank = hibmc_crtc_disable_vblank, 455 }; 456 457 static const struct drm_crtc_helper_funcs hibmc_crtc_helper_funcs = { 458 .mode_set_nofb = hibmc_crtc_mode_set_nofb, 459 .atomic_begin = hibmc_crtc_atomic_begin, 460 .atomic_flush = hibmc_crtc_atomic_flush, 461 .atomic_enable = hibmc_crtc_atomic_enable, 462 .atomic_disable = hibmc_crtc_atomic_disable, 463 }; 464 465 int hibmc_de_init(struct hibmc_drm_private *priv) 466 { 467 struct drm_device *dev = priv->dev; 468 struct drm_crtc *crtc; 469 struct drm_plane *plane; 470 int ret; 471 472 plane = hibmc_plane_init(priv); 473 if (IS_ERR(plane)) { 474 DRM_ERROR("failed to create plane: %ld\n", PTR_ERR(plane)); 475 return PTR_ERR(plane); 476 } 477 478 crtc = devm_kzalloc(dev->dev, sizeof(*crtc), GFP_KERNEL); 479 if (!crtc) { 480 DRM_ERROR("failed to alloc memory when init crtc\n"); 481 return -ENOMEM; 482 } 483 484 ret = drm_crtc_init_with_planes(dev, crtc, plane, 485 NULL, &hibmc_crtc_funcs, NULL); 486 if (ret) { 487 DRM_ERROR("failed to init crtc: %d\n", ret); 488 return ret; 489 } 490 491 ret = drm_mode_crtc_set_gamma_size(crtc, 256); 492 if (ret) { 493 DRM_ERROR("failed to set gamma size: %d\n", ret); 494 return ret; 495 } 496 drm_crtc_helper_add(crtc, &hibmc_crtc_helper_funcs); 497 498 return 0; 499 } 500