1 /**************************************************************************
2  * Copyright (c) 2011, Intel Corporation.
3  * All Rights Reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms and conditions of the GNU General Public License,
7  * version 2, as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17  *
18  **************************************************************************/
19 
20 #include <linux/backlight.h>
21 #include <drm/drmP.h>
22 #include <drm/drm.h>
23 #include "gma_drm.h"
24 #include "psb_drv.h"
25 #include "psb_reg.h"
26 #include "psb_intel_reg.h"
27 #include "intel_bios.h"
28 
29 
30 static int psb_output_init(struct drm_device *dev)
31 {
32 	struct drm_psb_private *dev_priv = dev->dev_private;
33 	psb_intel_lvds_init(dev, &dev_priv->mode_dev);
34 	psb_intel_sdvo_init(dev, SDVOB);
35 	return 0;
36 }
37 
38 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
39 
40 /*
41  *	Poulsbo Backlight Interfaces
42  */
43 
44 #define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
45 #define BLC_PWM_FREQ_CALC_CONSTANT 32
46 #define MHz 1000000
47 
48 #define PSB_BLC_PWM_PRECISION_FACTOR    10
49 #define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
50 #define PSB_BLC_MIN_PWM_REG_FREQ        0x2
51 
52 #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
53 #define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
54 
55 static int psb_brightness;
56 static struct backlight_device *psb_backlight_device;
57 
58 static int psb_get_brightness(struct backlight_device *bd)
59 {
60 	/* return locally cached var instead of HW read (due to DPST etc.) */
61 	/* FIXME: ideally return actual value in case firmware fiddled with
62 	   it */
63 	return psb_brightness;
64 }
65 
66 
67 static int psb_backlight_setup(struct drm_device *dev)
68 {
69 	struct drm_psb_private *dev_priv = dev->dev_private;
70 	unsigned long core_clock;
71 	/* u32 bl_max_freq; */
72 	/* unsigned long value; */
73 	u16 bl_max_freq;
74 	uint32_t value;
75 	uint32_t blc_pwm_precision_factor;
76 
77 	/* get bl_max_freq and pol from dev_priv*/
78 	if (!dev_priv->lvds_bl) {
79 		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
80 		return -ENOENT;
81 	}
82 	bl_max_freq = dev_priv->lvds_bl->freq;
83 	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
84 
85 	core_clock = dev_priv->core_freq;
86 
87 	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
88 	value *= blc_pwm_precision_factor;
89 	value /= bl_max_freq;
90 	value /= blc_pwm_precision_factor;
91 
92 	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
93 		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
94 				return -ERANGE;
95 	else {
96 		value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
97 		REG_WRITE(BLC_PWM_CTL,
98 			(value << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (value));
99 	}
100 	return 0;
101 }
102 
103 static int psb_set_brightness(struct backlight_device *bd)
104 {
105 	struct drm_device *dev = bl_get_data(psb_backlight_device);
106 	int level = bd->props.brightness;
107 
108 	/* Percentage 1-100% being valid */
109 	if (level < 1)
110 		level = 1;
111 
112 	psb_intel_lvds_set_brightness(dev, level);
113 	psb_brightness = level;
114 	return 0;
115 }
116 
117 static const struct backlight_ops psb_ops = {
118 	.get_brightness = psb_get_brightness,
119 	.update_status  = psb_set_brightness,
120 };
121 
122 static int psb_backlight_init(struct drm_device *dev)
123 {
124 	struct drm_psb_private *dev_priv = dev->dev_private;
125 	int ret;
126 	struct backlight_properties props;
127 
128 	memset(&props, 0, sizeof(struct backlight_properties));
129 	props.max_brightness = 100;
130 	props.type = BACKLIGHT_PLATFORM;
131 
132 	psb_backlight_device = backlight_device_register("psb-bl",
133 					NULL, (void *)dev, &psb_ops, &props);
134 	if (IS_ERR(psb_backlight_device))
135 		return PTR_ERR(psb_backlight_device);
136 
137 	ret = psb_backlight_setup(dev);
138 	if (ret < 0) {
139 		backlight_device_unregister(psb_backlight_device);
140 		psb_backlight_device = NULL;
141 		return ret;
142 	}
143 	psb_backlight_device->props.brightness = 100;
144 	psb_backlight_device->props.max_brightness = 100;
145 	backlight_update_status(psb_backlight_device);
146 	dev_priv->backlight_device = psb_backlight_device;
147 	return 0;
148 }
149 
150 #endif
151 
152 /*
153  *	Provide the Poulsbo specific chip logic and low level methods
154  *	for power management
155  */
156 
157 static void psb_init_pm(struct drm_device *dev)
158 {
159 	struct drm_psb_private *dev_priv = dev->dev_private;
160 
161 	u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
162 	gating &= ~3;	/* Disable 2D clock gating */
163 	gating |= 1;
164 	PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
165 	PSB_RSGX32(PSB_CR_CLKGATECTL);
166 }
167 
168 /**
169  *	psb_save_display_registers	-	save registers lost on suspend
170  *	@dev: our DRM device
171  *
172  *	Save the state we need in order to be able to restore the interface
173  *	upon resume from suspend
174  */
175 static int psb_save_display_registers(struct drm_device *dev)
176 {
177 	struct drm_psb_private *dev_priv = dev->dev_private;
178 	struct drm_crtc *crtc;
179 	struct drm_connector *connector;
180 	struct psb_state *regs = &dev_priv->regs.psb;
181 
182 	/* Display arbitration control + watermarks */
183 	regs->saveDSPARB = PSB_RVDC32(DSPARB);
184 	regs->saveDSPFW1 = PSB_RVDC32(DSPFW1);
185 	regs->saveDSPFW2 = PSB_RVDC32(DSPFW2);
186 	regs->saveDSPFW3 = PSB_RVDC32(DSPFW3);
187 	regs->saveDSPFW4 = PSB_RVDC32(DSPFW4);
188 	regs->saveDSPFW5 = PSB_RVDC32(DSPFW5);
189 	regs->saveDSPFW6 = PSB_RVDC32(DSPFW6);
190 	regs->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
191 
192 	/* Save crtc and output state */
193 	mutex_lock(&dev->mode_config.mutex);
194 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
195 		if (drm_helper_crtc_in_use(crtc))
196 			crtc->funcs->save(crtc);
197 	}
198 
199 	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
200 		connector->funcs->save(connector);
201 
202 	mutex_unlock(&dev->mode_config.mutex);
203 	return 0;
204 }
205 
206 /**
207  *	psb_restore_display_registers	-	restore lost register state
208  *	@dev: our DRM device
209  *
210  *	Restore register state that was lost during suspend and resume.
211  */
212 static int psb_restore_display_registers(struct drm_device *dev)
213 {
214 	struct drm_psb_private *dev_priv = dev->dev_private;
215 	struct drm_crtc *crtc;
216 	struct drm_connector *connector;
217 	struct psb_state *regs = &dev_priv->regs.psb;
218 
219 	/* Display arbitration + watermarks */
220 	PSB_WVDC32(regs->saveDSPARB, DSPARB);
221 	PSB_WVDC32(regs->saveDSPFW1, DSPFW1);
222 	PSB_WVDC32(regs->saveDSPFW2, DSPFW2);
223 	PSB_WVDC32(regs->saveDSPFW3, DSPFW3);
224 	PSB_WVDC32(regs->saveDSPFW4, DSPFW4);
225 	PSB_WVDC32(regs->saveDSPFW5, DSPFW5);
226 	PSB_WVDC32(regs->saveDSPFW6, DSPFW6);
227 	PSB_WVDC32(regs->saveCHICKENBIT, DSPCHICKENBIT);
228 
229 	/*make sure VGA plane is off. it initializes to on after reset!*/
230 	PSB_WVDC32(0x80000000, VGACNTRL);
231 
232 	mutex_lock(&dev->mode_config.mutex);
233 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
234 		if (drm_helper_crtc_in_use(crtc))
235 			crtc->funcs->restore(crtc);
236 
237 	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
238 		connector->funcs->restore(connector);
239 
240 	mutex_unlock(&dev->mode_config.mutex);
241 	return 0;
242 }
243 
244 static int psb_power_down(struct drm_device *dev)
245 {
246 	return 0;
247 }
248 
249 static int psb_power_up(struct drm_device *dev)
250 {
251 	return 0;
252 }
253 
254 static void psb_get_core_freq(struct drm_device *dev)
255 {
256 	uint32_t clock;
257 	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
258 	struct drm_psb_private *dev_priv = dev->dev_private;
259 
260 	/*pci_write_config_dword(pci_root, 0xD4, 0x00C32004);*/
261 	/*pci_write_config_dword(pci_root, 0xD0, 0xE0033000);*/
262 
263 	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
264 	pci_read_config_dword(pci_root, 0xD4, &clock);
265 	pci_dev_put(pci_root);
266 
267 	switch (clock & 0x07) {
268 	case 0:
269 		dev_priv->core_freq = 100;
270 		break;
271 	case 1:
272 		dev_priv->core_freq = 133;
273 		break;
274 	case 2:
275 		dev_priv->core_freq = 150;
276 		break;
277 	case 3:
278 		dev_priv->core_freq = 178;
279 		break;
280 	case 4:
281 		dev_priv->core_freq = 200;
282 		break;
283 	case 5:
284 	case 6:
285 	case 7:
286 		dev_priv->core_freq = 266;
287 	default:
288 		dev_priv->core_freq = 0;
289 	}
290 }
291 
292 static int psb_chip_setup(struct drm_device *dev)
293 {
294 	psb_get_core_freq(dev);
295 	gma_intel_setup_gmbus(dev);
296 	gma_intel_opregion_init(dev);
297 	psb_intel_init_bios(dev);
298 	return 0;
299 }
300 
301 static void psb_chip_teardown(struct drm_device *dev)
302 {
303 	gma_intel_teardown_gmbus(dev);
304 }
305 
306 const struct psb_ops psb_chip_ops = {
307 	.name = "Poulsbo",
308 	.accel_2d = 1,
309 	.pipes = 2,
310 	.crtcs = 2,
311 	.sgx_offset = PSB_SGX_OFFSET,
312 	.chip_setup = psb_chip_setup,
313 	.chip_teardown = psb_chip_teardown,
314 
315 	.crtc_helper = &psb_intel_helper_funcs,
316 	.crtc_funcs = &psb_intel_crtc_funcs,
317 
318 	.output_init = psb_output_init,
319 
320 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
321 	.backlight_init = psb_backlight_init,
322 #endif
323 
324 	.init_pm = psb_init_pm,
325 	.save_regs = psb_save_display_registers,
326 	.restore_regs = psb_restore_display_registers,
327 	.power_down = psb_power_down,
328 	.power_up = psb_power_up,
329 };
330 
331