1 /* 2 * Copyright © 2006-2009 Intel Corporation 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms and conditions of the GNU General Public License, 6 * version 2, as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope it will be useful, but WITHOUT 9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 11 * more details. 12 * 13 * You should have received a copy of the GNU General Public License along with 14 * this program; if not, write to the Free Software Foundation, Inc., 15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 16 * 17 * Authors: 18 * Eric Anholt <eric@anholt.net> 19 * Dave Airlie <airlied@linux.ie> 20 * Jesse Barnes <jesse.barnes@intel.com> 21 */ 22 23 #include <linux/i2c.h> 24 #include <drm/drmP.h> 25 #include <asm/intel-mid.h> 26 27 #include "intel_bios.h" 28 #include "psb_drv.h" 29 #include "psb_intel_drv.h" 30 #include "psb_intel_reg.h" 31 #include "power.h" 32 #include <linux/pm_runtime.h> 33 34 /* The max/min PWM frequency in BPCR[31:17] - */ 35 /* The smallest number is 1 (not 0) that can fit in the 36 * 15-bit field of the and then*/ 37 /* shifts to the left by one bit to get the actual 16-bit 38 * value that the 15-bits correspond to.*/ 39 #define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF 40 #define BRIGHTNESS_MAX_LEVEL 100 41 42 /** 43 * Sets the power state for the panel. 44 */ 45 static void oaktrail_lvds_set_power(struct drm_device *dev, 46 struct gma_encoder *gma_encoder, 47 bool on) 48 { 49 u32 pp_status; 50 struct drm_psb_private *dev_priv = dev->dev_private; 51 52 if (!gma_power_begin(dev, true)) 53 return; 54 55 if (on) { 56 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | 57 POWER_TARGET_ON); 58 do { 59 pp_status = REG_READ(PP_STATUS); 60 } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); 61 dev_priv->is_lvds_on = true; 62 if (dev_priv->ops->lvds_bl_power) 63 dev_priv->ops->lvds_bl_power(dev, true); 64 } else { 65 if (dev_priv->ops->lvds_bl_power) 66 dev_priv->ops->lvds_bl_power(dev, false); 67 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & 68 ~POWER_TARGET_ON); 69 do { 70 pp_status = REG_READ(PP_STATUS); 71 } while (pp_status & PP_ON); 72 dev_priv->is_lvds_on = false; 73 pm_request_idle(&dev->pdev->dev); 74 } 75 gma_power_end(dev); 76 } 77 78 static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode) 79 { 80 struct drm_device *dev = encoder->dev; 81 struct gma_encoder *gma_encoder = to_gma_encoder(encoder); 82 83 if (mode == DRM_MODE_DPMS_ON) 84 oaktrail_lvds_set_power(dev, gma_encoder, true); 85 else 86 oaktrail_lvds_set_power(dev, gma_encoder, false); 87 88 /* XXX: We never power down the LVDS pairs. */ 89 } 90 91 static void oaktrail_lvds_mode_set(struct drm_encoder *encoder, 92 struct drm_display_mode *mode, 93 struct drm_display_mode *adjusted_mode) 94 { 95 struct drm_device *dev = encoder->dev; 96 struct drm_psb_private *dev_priv = dev->dev_private; 97 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 98 struct drm_mode_config *mode_config = &dev->mode_config; 99 struct drm_connector *connector = NULL; 100 struct drm_crtc *crtc = encoder->crtc; 101 u32 lvds_port; 102 uint64_t v = DRM_MODE_SCALE_FULLSCREEN; 103 104 if (!gma_power_begin(dev, true)) 105 return; 106 107 /* 108 * The LVDS pin pair will already have been turned on in the 109 * psb_intel_crtc_mode_set since it has a large impact on the DPLL 110 * settings. 111 */ 112 lvds_port = (REG_READ(LVDS) & 113 (~LVDS_PIPEB_SELECT)) | 114 LVDS_PORT_EN | 115 LVDS_BORDER_EN; 116 117 /* If the firmware says dither on Moorestown, or the BIOS does 118 on Oaktrail then enable dithering */ 119 if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) 120 lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; 121 122 REG_WRITE(LVDS, lvds_port); 123 124 /* Find the connector we're trying to set up */ 125 list_for_each_entry(connector, &mode_config->connector_list, head) { 126 if (!connector->encoder || connector->encoder->crtc != crtc) 127 continue; 128 } 129 130 if (!connector) { 131 DRM_ERROR("Couldn't find connector when setting mode"); 132 return; 133 } 134 135 drm_object_property_get_value( 136 &connector->base, 137 dev->mode_config.scaling_mode_property, 138 &v); 139 140 if (v == DRM_MODE_SCALE_NO_SCALE) 141 REG_WRITE(PFIT_CONTROL, 0); 142 else if (v == DRM_MODE_SCALE_ASPECT) { 143 if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || 144 (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { 145 if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == 146 (mode->hdisplay * adjusted_mode->crtc_vdisplay)) 147 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); 148 else if ((adjusted_mode->crtc_hdisplay * 149 mode->vdisplay) > (mode->hdisplay * 150 adjusted_mode->crtc_vdisplay)) 151 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | 152 PFIT_SCALING_MODE_PILLARBOX); 153 else 154 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | 155 PFIT_SCALING_MODE_LETTERBOX); 156 } else 157 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); 158 } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ 159 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); 160 161 gma_power_end(dev); 162 } 163 164 static void oaktrail_lvds_prepare(struct drm_encoder *encoder) 165 { 166 struct drm_device *dev = encoder->dev; 167 struct drm_psb_private *dev_priv = dev->dev_private; 168 struct gma_encoder *gma_encoder = to_gma_encoder(encoder); 169 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 170 171 if (!gma_power_begin(dev, true)) 172 return; 173 174 mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); 175 mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & 176 BACKLIGHT_DUTY_CYCLE_MASK); 177 oaktrail_lvds_set_power(dev, gma_encoder, false); 178 gma_power_end(dev); 179 } 180 181 static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev) 182 { 183 struct drm_psb_private *dev_priv = dev->dev_private; 184 u32 ret; 185 186 if (gma_power_begin(dev, false)) { 187 ret = ((REG_READ(BLC_PWM_CTL) & 188 BACKLIGHT_MODULATION_FREQ_MASK) >> 189 BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; 190 191 gma_power_end(dev); 192 } else 193 ret = ((dev_priv->regs.saveBLC_PWM_CTL & 194 BACKLIGHT_MODULATION_FREQ_MASK) >> 195 BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; 196 197 return ret; 198 } 199 200 static void oaktrail_lvds_commit(struct drm_encoder *encoder) 201 { 202 struct drm_device *dev = encoder->dev; 203 struct drm_psb_private *dev_priv = dev->dev_private; 204 struct gma_encoder *gma_encoder = to_gma_encoder(encoder); 205 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 206 207 if (mode_dev->backlight_duty_cycle == 0) 208 mode_dev->backlight_duty_cycle = 209 oaktrail_lvds_get_max_backlight(dev); 210 oaktrail_lvds_set_power(dev, gma_encoder, true); 211 } 212 213 static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = { 214 .dpms = oaktrail_lvds_dpms, 215 .mode_fixup = psb_intel_lvds_mode_fixup, 216 .prepare = oaktrail_lvds_prepare, 217 .mode_set = oaktrail_lvds_mode_set, 218 .commit = oaktrail_lvds_commit, 219 }; 220 221 /* Returns the panel fixed mode from configuration. */ 222 223 static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev, 224 struct psb_intel_mode_device *mode_dev) 225 { 226 struct drm_display_mode *mode = NULL; 227 struct drm_psb_private *dev_priv = dev->dev_private; 228 struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD; 229 230 mode_dev->panel_fixed_mode = NULL; 231 232 /* Use the firmware provided data on Moorestown */ 233 if (dev_priv->has_gct) { 234 mode = kzalloc(sizeof(*mode), GFP_KERNEL); 235 if (!mode) 236 return; 237 238 mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; 239 mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; 240 mode->hsync_start = mode->hdisplay + \ 241 ((ti->hsync_offset_hi << 8) | \ 242 ti->hsync_offset_lo); 243 mode->hsync_end = mode->hsync_start + \ 244 ((ti->hsync_pulse_width_hi << 8) | \ 245 ti->hsync_pulse_width_lo); 246 mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ 247 ti->hblank_lo); 248 mode->vsync_start = \ 249 mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ 250 ti->vsync_offset_lo); 251 mode->vsync_end = \ 252 mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ 253 ti->vsync_pulse_width_lo); 254 mode->vtotal = mode->vdisplay + \ 255 ((ti->vblank_hi << 8) | ti->vblank_lo); 256 mode->clock = ti->pixel_clock * 10; 257 #if 0 258 pr_info("hdisplay is %d\n", mode->hdisplay); 259 pr_info("vdisplay is %d\n", mode->vdisplay); 260 pr_info("HSS is %d\n", mode->hsync_start); 261 pr_info("HSE is %d\n", mode->hsync_end); 262 pr_info("htotal is %d\n", mode->htotal); 263 pr_info("VSS is %d\n", mode->vsync_start); 264 pr_info("VSE is %d\n", mode->vsync_end); 265 pr_info("vtotal is %d\n", mode->vtotal); 266 pr_info("clock is %d\n", mode->clock); 267 #endif 268 mode_dev->panel_fixed_mode = mode; 269 } 270 271 /* Use the BIOS VBT mode if available */ 272 if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode) 273 mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, 274 mode_dev->vbt_mode); 275 276 /* Then try the LVDS VBT mode */ 277 if (mode_dev->panel_fixed_mode == NULL) 278 if (dev_priv->lfp_lvds_vbt_mode) 279 mode_dev->panel_fixed_mode = 280 drm_mode_duplicate(dev, 281 dev_priv->lfp_lvds_vbt_mode); 282 283 /* If we still got no mode then bail */ 284 if (mode_dev->panel_fixed_mode == NULL) 285 return; 286 287 drm_mode_set_name(mode_dev->panel_fixed_mode); 288 drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0); 289 } 290 291 /** 292 * oaktrail_lvds_init - setup LVDS connectors on this device 293 * @dev: drm device 294 * 295 * Create the connector, register the LVDS DDC bus, and try to figure out what 296 * modes we can display on the LVDS panel (if present). 297 */ 298 void oaktrail_lvds_init(struct drm_device *dev, 299 struct psb_intel_mode_device *mode_dev) 300 { 301 struct gma_encoder *gma_encoder; 302 struct gma_connector *gma_connector; 303 struct drm_connector *connector; 304 struct drm_encoder *encoder; 305 struct drm_psb_private *dev_priv = dev->dev_private; 306 struct edid *edid; 307 struct i2c_adapter *i2c_adap; 308 struct drm_display_mode *scan; /* *modes, *bios_mode; */ 309 310 gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); 311 if (!gma_encoder) 312 return; 313 314 gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); 315 if (!gma_connector) 316 goto failed_connector; 317 318 connector = &gma_connector->base; 319 encoder = &gma_encoder->base; 320 dev_priv->is_lvds_on = true; 321 drm_connector_init(dev, connector, 322 &psb_intel_lvds_connector_funcs, 323 DRM_MODE_CONNECTOR_LVDS); 324 325 drm_encoder_init(dev, encoder, &psb_intel_lvds_enc_funcs, 326 DRM_MODE_ENCODER_LVDS, NULL); 327 328 gma_connector_attach_encoder(gma_connector, gma_encoder); 329 gma_encoder->type = INTEL_OUTPUT_LVDS; 330 331 drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs); 332 drm_connector_helper_add(connector, 333 &psb_intel_lvds_connector_helper_funcs); 334 connector->display_info.subpixel_order = SubPixelHorizontalRGB; 335 connector->interlace_allowed = false; 336 connector->doublescan_allowed = false; 337 338 drm_object_attach_property(&connector->base, 339 dev->mode_config.scaling_mode_property, 340 DRM_MODE_SCALE_FULLSCREEN); 341 drm_object_attach_property(&connector->base, 342 dev_priv->backlight_property, 343 BRIGHTNESS_MAX_LEVEL); 344 345 mode_dev->panel_wants_dither = false; 346 if (dev_priv->has_gct) 347 mode_dev->panel_wants_dither = (dev_priv->gct_data. 348 Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); 349 if (dev_priv->lvds_dither) 350 mode_dev->panel_wants_dither = 1; 351 352 /* 353 * LVDS discovery: 354 * 1) check for EDID on DDC 355 * 2) check for VBT data 356 * 3) check to see if LVDS is already on 357 * if none of the above, no panel 358 * 4) make sure lid is open 359 * if closed, act like it's not there for now 360 */ 361 362 edid = NULL; 363 mutex_lock(&dev->mode_config.mutex); 364 i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); 365 if (i2c_adap) 366 edid = drm_get_edid(connector, i2c_adap); 367 if (edid == NULL && dev_priv->lpc_gpio_base) { 368 oaktrail_lvds_i2c_init(encoder); 369 if (gma_encoder->ddc_bus != NULL) { 370 i2c_adap = &gma_encoder->ddc_bus->adapter; 371 edid = drm_get_edid(connector, i2c_adap); 372 } 373 } 374 /* 375 * Attempt to get the fixed panel mode from DDC. Assume that the 376 * preferred mode is the right one. 377 */ 378 if (edid) { 379 drm_connector_update_edid_property(connector, edid); 380 drm_add_edid_modes(connector, edid); 381 kfree(edid); 382 383 list_for_each_entry(scan, &connector->probed_modes, head) { 384 if (scan->type & DRM_MODE_TYPE_PREFERRED) { 385 mode_dev->panel_fixed_mode = 386 drm_mode_duplicate(dev, scan); 387 goto out; /* FIXME: check for quirks */ 388 } 389 } 390 } else 391 dev_err(dev->dev, "No ddc adapter available!\n"); 392 /* 393 * If we didn't get EDID, try geting panel timing 394 * from configuration data 395 */ 396 oaktrail_lvds_get_configuration_mode(dev, mode_dev); 397 398 if (mode_dev->panel_fixed_mode) { 399 mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; 400 goto out; /* FIXME: check for quirks */ 401 } 402 403 /* If we still don't have a mode after all that, give up. */ 404 if (!mode_dev->panel_fixed_mode) { 405 dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); 406 goto failed_find; 407 } 408 409 out: 410 mutex_unlock(&dev->mode_config.mutex); 411 412 drm_connector_register(connector); 413 return; 414 415 failed_find: 416 mutex_unlock(&dev->mode_config.mutex); 417 418 dev_dbg(dev->dev, "No LVDS modes found, disabling.\n"); 419 if (gma_encoder->ddc_bus) { 420 psb_intel_i2c_destroy(gma_encoder->ddc_bus); 421 gma_encoder->ddc_bus = NULL; 422 } 423 424 /* failed_ddc: */ 425 426 drm_encoder_cleanup(encoder); 427 drm_connector_cleanup(connector); 428 kfree(gma_connector); 429 failed_connector: 430 kfree(gma_encoder); 431 } 432 433