1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright © 2006-2009 Intel Corporation 4 * 5 * Authors: 6 * Eric Anholt <eric@anholt.net> 7 * Dave Airlie <airlied@linux.ie> 8 * Jesse Barnes <jesse.barnes@intel.com> 9 */ 10 11 #include <linux/i2c.h> 12 #include <linux/pm_runtime.h> 13 14 #include <asm/intel-mid.h> 15 16 #include <drm/drm_simple_kms_helper.h> 17 18 #include "intel_bios.h" 19 #include "power.h" 20 #include "psb_drv.h" 21 #include "psb_intel_drv.h" 22 #include "psb_intel_reg.h" 23 24 /* The max/min PWM frequency in BPCR[31:17] - */ 25 /* The smallest number is 1 (not 0) that can fit in the 26 * 15-bit field of the and then*/ 27 /* shifts to the left by one bit to get the actual 16-bit 28 * value that the 15-bits correspond to.*/ 29 #define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF 30 #define BRIGHTNESS_MAX_LEVEL 100 31 32 /** 33 * Sets the power state for the panel. 34 */ 35 static void oaktrail_lvds_set_power(struct drm_device *dev, 36 struct gma_encoder *gma_encoder, 37 bool on) 38 { 39 u32 pp_status; 40 struct drm_psb_private *dev_priv = dev->dev_private; 41 42 if (!gma_power_begin(dev, true)) 43 return; 44 45 if (on) { 46 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | 47 POWER_TARGET_ON); 48 do { 49 pp_status = REG_READ(PP_STATUS); 50 } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); 51 dev_priv->is_lvds_on = true; 52 if (dev_priv->ops->lvds_bl_power) 53 dev_priv->ops->lvds_bl_power(dev, true); 54 } else { 55 if (dev_priv->ops->lvds_bl_power) 56 dev_priv->ops->lvds_bl_power(dev, false); 57 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & 58 ~POWER_TARGET_ON); 59 do { 60 pp_status = REG_READ(PP_STATUS); 61 } while (pp_status & PP_ON); 62 dev_priv->is_lvds_on = false; 63 pm_request_idle(&dev->pdev->dev); 64 } 65 gma_power_end(dev); 66 } 67 68 static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode) 69 { 70 struct drm_device *dev = encoder->dev; 71 struct gma_encoder *gma_encoder = to_gma_encoder(encoder); 72 73 if (mode == DRM_MODE_DPMS_ON) 74 oaktrail_lvds_set_power(dev, gma_encoder, true); 75 else 76 oaktrail_lvds_set_power(dev, gma_encoder, false); 77 78 /* XXX: We never power down the LVDS pairs. */ 79 } 80 81 static void oaktrail_lvds_mode_set(struct drm_encoder *encoder, 82 struct drm_display_mode *mode, 83 struct drm_display_mode *adjusted_mode) 84 { 85 struct drm_device *dev = encoder->dev; 86 struct drm_psb_private *dev_priv = dev->dev_private; 87 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 88 struct drm_mode_config *mode_config = &dev->mode_config; 89 struct drm_connector *connector = NULL; 90 struct drm_crtc *crtc = encoder->crtc; 91 u32 lvds_port; 92 uint64_t v = DRM_MODE_SCALE_FULLSCREEN; 93 94 if (!gma_power_begin(dev, true)) 95 return; 96 97 /* 98 * The LVDS pin pair will already have been turned on in the 99 * psb_intel_crtc_mode_set since it has a large impact on the DPLL 100 * settings. 101 */ 102 lvds_port = (REG_READ(LVDS) & 103 (~LVDS_PIPEB_SELECT)) | 104 LVDS_PORT_EN | 105 LVDS_BORDER_EN; 106 107 /* If the firmware says dither on Moorestown, or the BIOS does 108 on Oaktrail then enable dithering */ 109 if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) 110 lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; 111 112 REG_WRITE(LVDS, lvds_port); 113 114 /* Find the connector we're trying to set up */ 115 list_for_each_entry(connector, &mode_config->connector_list, head) { 116 if (!connector->encoder || connector->encoder->crtc != crtc) 117 continue; 118 } 119 120 if (!connector) { 121 DRM_ERROR("Couldn't find connector when setting mode"); 122 gma_power_end(dev); 123 return; 124 } 125 126 drm_object_property_get_value( 127 &connector->base, 128 dev->mode_config.scaling_mode_property, 129 &v); 130 131 if (v == DRM_MODE_SCALE_NO_SCALE) 132 REG_WRITE(PFIT_CONTROL, 0); 133 else if (v == DRM_MODE_SCALE_ASPECT) { 134 if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || 135 (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { 136 if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == 137 (mode->hdisplay * adjusted_mode->crtc_vdisplay)) 138 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); 139 else if ((adjusted_mode->crtc_hdisplay * 140 mode->vdisplay) > (mode->hdisplay * 141 adjusted_mode->crtc_vdisplay)) 142 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | 143 PFIT_SCALING_MODE_PILLARBOX); 144 else 145 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | 146 PFIT_SCALING_MODE_LETTERBOX); 147 } else 148 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); 149 } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ 150 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); 151 152 gma_power_end(dev); 153 } 154 155 static void oaktrail_lvds_prepare(struct drm_encoder *encoder) 156 { 157 struct drm_device *dev = encoder->dev; 158 struct drm_psb_private *dev_priv = dev->dev_private; 159 struct gma_encoder *gma_encoder = to_gma_encoder(encoder); 160 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 161 162 if (!gma_power_begin(dev, true)) 163 return; 164 165 mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); 166 mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & 167 BACKLIGHT_DUTY_CYCLE_MASK); 168 oaktrail_lvds_set_power(dev, gma_encoder, false); 169 gma_power_end(dev); 170 } 171 172 static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev) 173 { 174 struct drm_psb_private *dev_priv = dev->dev_private; 175 u32 ret; 176 177 if (gma_power_begin(dev, false)) { 178 ret = ((REG_READ(BLC_PWM_CTL) & 179 BACKLIGHT_MODULATION_FREQ_MASK) >> 180 BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; 181 182 gma_power_end(dev); 183 } else 184 ret = ((dev_priv->regs.saveBLC_PWM_CTL & 185 BACKLIGHT_MODULATION_FREQ_MASK) >> 186 BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; 187 188 return ret; 189 } 190 191 static void oaktrail_lvds_commit(struct drm_encoder *encoder) 192 { 193 struct drm_device *dev = encoder->dev; 194 struct drm_psb_private *dev_priv = dev->dev_private; 195 struct gma_encoder *gma_encoder = to_gma_encoder(encoder); 196 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; 197 198 if (mode_dev->backlight_duty_cycle == 0) 199 mode_dev->backlight_duty_cycle = 200 oaktrail_lvds_get_max_backlight(dev); 201 oaktrail_lvds_set_power(dev, gma_encoder, true); 202 } 203 204 static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = { 205 .dpms = oaktrail_lvds_dpms, 206 .mode_fixup = psb_intel_lvds_mode_fixup, 207 .prepare = oaktrail_lvds_prepare, 208 .mode_set = oaktrail_lvds_mode_set, 209 .commit = oaktrail_lvds_commit, 210 }; 211 212 /* Returns the panel fixed mode from configuration. */ 213 214 static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev, 215 struct psb_intel_mode_device *mode_dev) 216 { 217 struct drm_display_mode *mode = NULL; 218 struct drm_psb_private *dev_priv = dev->dev_private; 219 struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD; 220 221 mode_dev->panel_fixed_mode = NULL; 222 223 /* Use the firmware provided data on Moorestown */ 224 if (dev_priv->has_gct) { 225 mode = kzalloc(sizeof(*mode), GFP_KERNEL); 226 if (!mode) 227 return; 228 229 mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; 230 mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; 231 mode->hsync_start = mode->hdisplay + \ 232 ((ti->hsync_offset_hi << 8) | \ 233 ti->hsync_offset_lo); 234 mode->hsync_end = mode->hsync_start + \ 235 ((ti->hsync_pulse_width_hi << 8) | \ 236 ti->hsync_pulse_width_lo); 237 mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ 238 ti->hblank_lo); 239 mode->vsync_start = \ 240 mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ 241 ti->vsync_offset_lo); 242 mode->vsync_end = \ 243 mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ 244 ti->vsync_pulse_width_lo); 245 mode->vtotal = mode->vdisplay + \ 246 ((ti->vblank_hi << 8) | ti->vblank_lo); 247 mode->clock = ti->pixel_clock * 10; 248 #if 0 249 pr_info("hdisplay is %d\n", mode->hdisplay); 250 pr_info("vdisplay is %d\n", mode->vdisplay); 251 pr_info("HSS is %d\n", mode->hsync_start); 252 pr_info("HSE is %d\n", mode->hsync_end); 253 pr_info("htotal is %d\n", mode->htotal); 254 pr_info("VSS is %d\n", mode->vsync_start); 255 pr_info("VSE is %d\n", mode->vsync_end); 256 pr_info("vtotal is %d\n", mode->vtotal); 257 pr_info("clock is %d\n", mode->clock); 258 #endif 259 mode_dev->panel_fixed_mode = mode; 260 } 261 262 /* Use the BIOS VBT mode if available */ 263 if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode) 264 mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, 265 mode_dev->vbt_mode); 266 267 /* Then try the LVDS VBT mode */ 268 if (mode_dev->panel_fixed_mode == NULL) 269 if (dev_priv->lfp_lvds_vbt_mode) 270 mode_dev->panel_fixed_mode = 271 drm_mode_duplicate(dev, 272 dev_priv->lfp_lvds_vbt_mode); 273 274 /* If we still got no mode then bail */ 275 if (mode_dev->panel_fixed_mode == NULL) 276 return; 277 278 drm_mode_set_name(mode_dev->panel_fixed_mode); 279 drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0); 280 } 281 282 /** 283 * oaktrail_lvds_init - setup LVDS connectors on this device 284 * @dev: drm device 285 * 286 * Create the connector, register the LVDS DDC bus, and try to figure out what 287 * modes we can display on the LVDS panel (if present). 288 */ 289 void oaktrail_lvds_init(struct drm_device *dev, 290 struct psb_intel_mode_device *mode_dev) 291 { 292 struct gma_encoder *gma_encoder; 293 struct gma_connector *gma_connector; 294 struct drm_connector *connector; 295 struct drm_encoder *encoder; 296 struct drm_psb_private *dev_priv = dev->dev_private; 297 struct edid *edid; 298 struct i2c_adapter *i2c_adap; 299 struct drm_display_mode *scan; /* *modes, *bios_mode; */ 300 301 gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); 302 if (!gma_encoder) 303 return; 304 305 gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); 306 if (!gma_connector) 307 goto failed_connector; 308 309 connector = &gma_connector->base; 310 encoder = &gma_encoder->base; 311 dev_priv->is_lvds_on = true; 312 drm_connector_init(dev, connector, 313 &psb_intel_lvds_connector_funcs, 314 DRM_MODE_CONNECTOR_LVDS); 315 316 drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); 317 318 gma_connector_attach_encoder(gma_connector, gma_encoder); 319 gma_encoder->type = INTEL_OUTPUT_LVDS; 320 321 drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs); 322 drm_connector_helper_add(connector, 323 &psb_intel_lvds_connector_helper_funcs); 324 connector->display_info.subpixel_order = SubPixelHorizontalRGB; 325 connector->interlace_allowed = false; 326 connector->doublescan_allowed = false; 327 328 drm_object_attach_property(&connector->base, 329 dev->mode_config.scaling_mode_property, 330 DRM_MODE_SCALE_FULLSCREEN); 331 drm_object_attach_property(&connector->base, 332 dev_priv->backlight_property, 333 BRIGHTNESS_MAX_LEVEL); 334 335 mode_dev->panel_wants_dither = false; 336 if (dev_priv->has_gct) 337 mode_dev->panel_wants_dither = (dev_priv->gct_data. 338 Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); 339 if (dev_priv->lvds_dither) 340 mode_dev->panel_wants_dither = 1; 341 342 /* 343 * LVDS discovery: 344 * 1) check for EDID on DDC 345 * 2) check for VBT data 346 * 3) check to see if LVDS is already on 347 * if none of the above, no panel 348 * 4) make sure lid is open 349 * if closed, act like it's not there for now 350 */ 351 352 edid = NULL; 353 mutex_lock(&dev->mode_config.mutex); 354 i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); 355 if (i2c_adap) 356 edid = drm_get_edid(connector, i2c_adap); 357 if (edid == NULL && dev_priv->lpc_gpio_base) { 358 oaktrail_lvds_i2c_init(encoder); 359 if (gma_encoder->ddc_bus != NULL) { 360 i2c_adap = &gma_encoder->ddc_bus->adapter; 361 edid = drm_get_edid(connector, i2c_adap); 362 } 363 } 364 /* 365 * Attempt to get the fixed panel mode from DDC. Assume that the 366 * preferred mode is the right one. 367 */ 368 if (edid) { 369 drm_connector_update_edid_property(connector, edid); 370 drm_add_edid_modes(connector, edid); 371 kfree(edid); 372 373 list_for_each_entry(scan, &connector->probed_modes, head) { 374 if (scan->type & DRM_MODE_TYPE_PREFERRED) { 375 mode_dev->panel_fixed_mode = 376 drm_mode_duplicate(dev, scan); 377 goto out; /* FIXME: check for quirks */ 378 } 379 } 380 } else 381 dev_err(dev->dev, "No ddc adapter available!\n"); 382 /* 383 * If we didn't get EDID, try geting panel timing 384 * from configuration data 385 */ 386 oaktrail_lvds_get_configuration_mode(dev, mode_dev); 387 388 if (mode_dev->panel_fixed_mode) { 389 mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; 390 goto out; /* FIXME: check for quirks */ 391 } 392 393 /* If we still don't have a mode after all that, give up. */ 394 if (!mode_dev->panel_fixed_mode) { 395 dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); 396 goto failed_find; 397 } 398 399 out: 400 mutex_unlock(&dev->mode_config.mutex); 401 402 drm_connector_register(connector); 403 return; 404 405 failed_find: 406 mutex_unlock(&dev->mode_config.mutex); 407 408 dev_dbg(dev->dev, "No LVDS modes found, disabling.\n"); 409 if (gma_encoder->ddc_bus) { 410 psb_intel_i2c_destroy(gma_encoder->ddc_bus); 411 gma_encoder->ddc_bus = NULL; 412 } 413 414 /* failed_ddc: */ 415 416 drm_encoder_cleanup(encoder); 417 drm_connector_cleanup(connector); 418 kfree(gma_connector); 419 failed_connector: 420 kfree(gma_encoder); 421 } 422 423