1 // SPDX-License-Identifier: GPL-2.0-only
2 /**************************************************************************
3  * Copyright (c) 2011, Intel Corporation.
4  * All Rights Reserved.
5  *
6  **************************************************************************/
7 
8 #include <linux/backlight.h>
9 #include <linux/delay.h>
10 #include <linux/dmi.h>
11 #include <linux/module.h>
12 
13 #include <drm/drm.h>
14 
15 #include "intel_bios.h"
16 #include "mid_bios.h"
17 #include "psb_drv.h"
18 #include "psb_intel_reg.h"
19 #include "psb_reg.h"
20 
21 static int oaktrail_output_init(struct drm_device *dev)
22 {
23 	struct drm_psb_private *dev_priv = dev->dev_private;
24 	if (dev_priv->iLVDS_enable)
25 		oaktrail_lvds_init(dev, &dev_priv->mode_dev);
26 	else
27 		dev_err(dev->dev, "DSI is not supported\n");
28 	if (dev_priv->hdmi_priv)
29 		oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
30 
31 	psb_intel_sdvo_init(dev, SDVOB);
32 
33 	return 0;
34 }
35 
36 /*
37  *	Provide the low level interfaces for the Moorestown backlight
38  */
39 
40 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
41 
42 #define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
43 #define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
44 #define BLC_PWM_FREQ_CALC_CONSTANT 32
45 #define MHz 1000000
46 #define BLC_ADJUSTMENT_MAX 100
47 
48 static struct backlight_device *oaktrail_backlight_device;
49 static int oaktrail_brightness;
50 
51 static int oaktrail_set_brightness(struct backlight_device *bd)
52 {
53 	struct drm_device *dev = bl_get_data(oaktrail_backlight_device);
54 	struct drm_psb_private *dev_priv = dev->dev_private;
55 	int level = bd->props.brightness;
56 	u32 blc_pwm_ctl;
57 	u32 max_pwm_blc;
58 
59 	/* Percentage 1-100% being valid */
60 	if (level < 1)
61 		level = 1;
62 
63 	if (gma_power_begin(dev, 0)) {
64 		/* Calculate and set the brightness value */
65 		max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
66 		blc_pwm_ctl = level * max_pwm_blc / 100;
67 
68 		/* Adjust the backlight level with the percent in
69 		 * dev_priv->blc_adj1;
70 		 */
71 		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
72 		blc_pwm_ctl = blc_pwm_ctl / 100;
73 
74 		/* Adjust the backlight level with the percent in
75 		 * dev_priv->blc_adj2;
76 		 */
77 		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
78 		blc_pwm_ctl = blc_pwm_ctl / 100;
79 
80 		/* force PWM bit on */
81 		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
82 		REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
83 		gma_power_end(dev);
84 	}
85 	oaktrail_brightness = level;
86 	return 0;
87 }
88 
89 static int oaktrail_get_brightness(struct backlight_device *bd)
90 {
91 	/* return locally cached var instead of HW read (due to DPST etc.) */
92 	/* FIXME: ideally return actual value in case firmware fiddled with
93 	   it */
94 	return oaktrail_brightness;
95 }
96 
97 static int device_backlight_init(struct drm_device *dev)
98 {
99 	struct drm_psb_private *dev_priv = dev->dev_private;
100 	unsigned long core_clock;
101 	u16 bl_max_freq;
102 	uint32_t value;
103 	uint32_t blc_pwm_precision_factor;
104 
105 	dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
106 	dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
107 	bl_max_freq = 256;
108 	/* this needs to be set elsewhere */
109 	blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
110 
111 	core_clock = dev_priv->core_freq;
112 
113 	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
114 	value *= blc_pwm_precision_factor;
115 	value /= bl_max_freq;
116 	value /= blc_pwm_precision_factor;
117 
118 	if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
119 			return -ERANGE;
120 
121 	if (gma_power_begin(dev, false)) {
122 		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
123 		REG_WRITE(BLC_PWM_CTL, value | (value << 16));
124 		gma_power_end(dev);
125 	}
126 	return 0;
127 }
128 
129 static const struct backlight_ops oaktrail_ops = {
130 	.get_brightness = oaktrail_get_brightness,
131 	.update_status  = oaktrail_set_brightness,
132 };
133 
134 static int oaktrail_backlight_init(struct drm_device *dev)
135 {
136 	struct drm_psb_private *dev_priv = dev->dev_private;
137 	int ret;
138 	struct backlight_properties props;
139 
140 	memset(&props, 0, sizeof(struct backlight_properties));
141 	props.max_brightness = 100;
142 	props.type = BACKLIGHT_PLATFORM;
143 
144 	oaktrail_backlight_device = backlight_device_register("oaktrail-bl",
145 				NULL, (void *)dev, &oaktrail_ops, &props);
146 
147 	if (IS_ERR(oaktrail_backlight_device))
148 		return PTR_ERR(oaktrail_backlight_device);
149 
150 	ret = device_backlight_init(dev);
151 	if (ret < 0) {
152 		backlight_device_unregister(oaktrail_backlight_device);
153 		return ret;
154 	}
155 	oaktrail_backlight_device->props.brightness = 100;
156 	oaktrail_backlight_device->props.max_brightness = 100;
157 	backlight_update_status(oaktrail_backlight_device);
158 	dev_priv->backlight_device = oaktrail_backlight_device;
159 	return 0;
160 }
161 
162 #endif
163 
164 /*
165  *	Provide the Moorestown specific chip logic and low level methods
166  *	for power management
167  */
168 
169 /**
170  *	oaktrail_save_display_registers	-	save registers lost on suspend
171  *	@dev: our DRM device
172  *
173  *	Save the state we need in order to be able to restore the interface
174  *	upon resume from suspend
175  */
176 static int oaktrail_save_display_registers(struct drm_device *dev)
177 {
178 	struct drm_psb_private *dev_priv = dev->dev_private;
179 	struct psb_save_area *regs = &dev_priv->regs;
180 	struct psb_pipe *p = &regs->pipe[0];
181 	int i;
182 	u32 pp_stat;
183 
184 	/* Display arbitration control + watermarks */
185 	regs->psb.saveDSPARB = PSB_RVDC32(DSPARB);
186 	regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1);
187 	regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2);
188 	regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3);
189 	regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4);
190 	regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5);
191 	regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6);
192 	regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
193 
194 	/* Pipe & plane A info */
195 	p->conf = PSB_RVDC32(PIPEACONF);
196 	p->src = PSB_RVDC32(PIPEASRC);
197 	p->fp0 = PSB_RVDC32(MRST_FPA0);
198 	p->fp1 = PSB_RVDC32(MRST_FPA1);
199 	p->dpll = PSB_RVDC32(MRST_DPLL_A);
200 	p->htotal = PSB_RVDC32(HTOTAL_A);
201 	p->hblank = PSB_RVDC32(HBLANK_A);
202 	p->hsync = PSB_RVDC32(HSYNC_A);
203 	p->vtotal = PSB_RVDC32(VTOTAL_A);
204 	p->vblank = PSB_RVDC32(VBLANK_A);
205 	p->vsync = PSB_RVDC32(VSYNC_A);
206 	regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
207 	p->cntr = PSB_RVDC32(DSPACNTR);
208 	p->stride = PSB_RVDC32(DSPASTRIDE);
209 	p->addr = PSB_RVDC32(DSPABASE);
210 	p->surf = PSB_RVDC32(DSPASURF);
211 	p->linoff = PSB_RVDC32(DSPALINOFF);
212 	p->tileoff = PSB_RVDC32(DSPATILEOFF);
213 
214 	/* Save cursor regs */
215 	regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
216 	regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
217 	regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
218 
219 	/* Save palette (gamma) */
220 	for (i = 0; i < 256; i++)
221 		p->palette[i] = PSB_RVDC32(PALETTE_A + (i << 2));
222 
223 	if (dev_priv->hdmi_priv)
224 		oaktrail_hdmi_save(dev);
225 
226 	/* Save performance state */
227 	regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
228 
229 	/* LVDS state */
230 	regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
231 	regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
232 	regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
233 	regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
234 	regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
235 	regs->psb.saveLVDS = PSB_RVDC32(LVDS);
236 	regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
237 	regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
238 	regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
239 	regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
240 
241 	/* HW overlay */
242 	regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD);
243 	regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
244 	regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
245 	regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
246 	regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
247 	regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
248 	regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
249 
250 	/* DPST registers */
251 	regs->psb.saveHISTOGRAM_INT_CONTROL_REG =
252 					PSB_RVDC32(HISTOGRAM_INT_CONTROL);
253 	regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG =
254 					PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
255 	regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
256 
257 	if (dev_priv->iLVDS_enable) {
258 		/* Shut down the panel */
259 		PSB_WVDC32(0, PP_CONTROL);
260 
261 		do {
262 			pp_stat = PSB_RVDC32(PP_STATUS);
263 		} while (pp_stat & 0x80000000);
264 
265 		/* Turn off the plane */
266 		PSB_WVDC32(0x58000000, DSPACNTR);
267 		/* Trigger the plane disable */
268 		PSB_WVDC32(0, DSPASURF);
269 
270 		/* Wait ~4 ticks */
271 		msleep(4);
272 
273 		/* Turn off pipe */
274 		PSB_WVDC32(0x0, PIPEACONF);
275 		/* Wait ~8 ticks */
276 		msleep(8);
277 
278 		/* Turn off PLLs */
279 		PSB_WVDC32(0, MRST_DPLL_A);
280 	}
281 	return 0;
282 }
283 
284 /**
285  *	oaktrail_restore_display_registers	-	restore lost register state
286  *	@dev: our DRM device
287  *
288  *	Restore register state that was lost during suspend and resume.
289  */
290 static int oaktrail_restore_display_registers(struct drm_device *dev)
291 {
292 	struct drm_psb_private *dev_priv = dev->dev_private;
293 	struct psb_save_area *regs = &dev_priv->regs;
294 	struct psb_pipe *p = &regs->pipe[0];
295 	u32 pp_stat;
296 	int i;
297 
298 	/* Display arbitration + watermarks */
299 	PSB_WVDC32(regs->psb.saveDSPARB, DSPARB);
300 	PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1);
301 	PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2);
302 	PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3);
303 	PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4);
304 	PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5);
305 	PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6);
306 	PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT);
307 
308 	/* Make sure VGA plane is off. it initializes to on after reset!*/
309 	PSB_WVDC32(0x80000000, VGACNTRL);
310 
311 	/* set the plls */
312 	PSB_WVDC32(p->fp0, MRST_FPA0);
313 	PSB_WVDC32(p->fp1, MRST_FPA1);
314 
315 	/* Actually enable it */
316 	PSB_WVDC32(p->dpll, MRST_DPLL_A);
317 	udelay(150);
318 
319 	/* Restore mode */
320 	PSB_WVDC32(p->htotal, HTOTAL_A);
321 	PSB_WVDC32(p->hblank, HBLANK_A);
322 	PSB_WVDC32(p->hsync, HSYNC_A);
323 	PSB_WVDC32(p->vtotal, VTOTAL_A);
324 	PSB_WVDC32(p->vblank, VBLANK_A);
325 	PSB_WVDC32(p->vsync, VSYNC_A);
326 	PSB_WVDC32(p->src, PIPEASRC);
327 	PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A);
328 
329 	/* Restore performance mode*/
330 	PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE);
331 
332 	/* Enable the pipe*/
333 	if (dev_priv->iLVDS_enable)
334 		PSB_WVDC32(p->conf, PIPEACONF);
335 
336 	/* Set up the plane*/
337 	PSB_WVDC32(p->linoff, DSPALINOFF);
338 	PSB_WVDC32(p->stride, DSPASTRIDE);
339 	PSB_WVDC32(p->tileoff, DSPATILEOFF);
340 
341 	/* Enable the plane */
342 	PSB_WVDC32(p->cntr, DSPACNTR);
343 	PSB_WVDC32(p->surf, DSPASURF);
344 
345 	/* Enable Cursor A */
346 	PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR);
347 	PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS);
348 	PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE);
349 
350 	/* Restore palette (gamma) */
351 	for (i = 0; i < 256; i++)
352 		PSB_WVDC32(p->palette[i], PALETTE_A + (i << 2));
353 
354 	if (dev_priv->hdmi_priv)
355 		oaktrail_hdmi_restore(dev);
356 
357 	if (dev_priv->iLVDS_enable) {
358 		PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
359 		PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/
360 		PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL);
361 		PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
362 		PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
363 		PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL);
364 		PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON);
365 		PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF);
366 		PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE);
367 		PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL);
368 	}
369 
370 	/* Wait for cycle delay */
371 	do {
372 		pp_stat = PSB_RVDC32(PP_STATUS);
373 	} while (pp_stat & 0x08000000);
374 
375 	/* Wait for panel power up */
376 	do {
377 		pp_stat = PSB_RVDC32(PP_STATUS);
378 	} while (pp_stat & 0x10000000);
379 
380 	/* Restore HW overlay */
381 	PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD);
382 	PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0);
383 	PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1);
384 	PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2);
385 	PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3);
386 	PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4);
387 	PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5);
388 
389 	/* DPST registers */
390 	PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG,
391 						HISTOGRAM_INT_CONTROL);
392 	PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG,
393 						HISTOGRAM_LOGIC_CONTROL);
394 	PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
395 
396 	return 0;
397 }
398 
399 /**
400  *	oaktrail_power_down	-	power down the display island
401  *	@dev: our DRM device
402  *
403  *	Power down the display interface of our device
404  */
405 static int oaktrail_power_down(struct drm_device *dev)
406 {
407 	struct drm_psb_private *dev_priv = dev->dev_private;
408 	u32 pwr_mask ;
409 	u32 pwr_sts;
410 
411 	pwr_mask = PSB_PWRGT_DISPLAY_MASK;
412 	outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
413 
414 	while (true) {
415 		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
416 		if ((pwr_sts & pwr_mask) == pwr_mask)
417 			break;
418 		else
419 			udelay(10);
420 	}
421 	return 0;
422 }
423 
424 /*
425  * oaktrail_power_up
426  *
427  * Restore power to the specified island(s) (powergating)
428  */
429 static int oaktrail_power_up(struct drm_device *dev)
430 {
431 	struct drm_psb_private *dev_priv = dev->dev_private;
432 	u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
433 	u32 pwr_sts, pwr_cnt;
434 
435 	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
436 	pwr_cnt &= ~pwr_mask;
437 	outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
438 
439 	while (true) {
440 		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
441 		if ((pwr_sts & pwr_mask) == 0)
442 			break;
443 		else
444 			udelay(10);
445 	}
446 	return 0;
447 }
448 
449 /* Oaktrail */
450 static const struct psb_offset oaktrail_regmap[2] = {
451 	{
452 		.fp0 = MRST_FPA0,
453 		.fp1 = MRST_FPA1,
454 		.cntr = DSPACNTR,
455 		.conf = PIPEACONF,
456 		.src = PIPEASRC,
457 		.dpll = MRST_DPLL_A,
458 		.htotal = HTOTAL_A,
459 		.hblank = HBLANK_A,
460 		.hsync = HSYNC_A,
461 		.vtotal = VTOTAL_A,
462 		.vblank = VBLANK_A,
463 		.vsync = VSYNC_A,
464 		.stride = DSPASTRIDE,
465 		.size = DSPASIZE,
466 		.pos = DSPAPOS,
467 		.surf = DSPASURF,
468 		.addr = MRST_DSPABASE,
469 		.base = MRST_DSPABASE,
470 		.status = PIPEASTAT,
471 		.linoff = DSPALINOFF,
472 		.tileoff = DSPATILEOFF,
473 		.palette = PALETTE_A,
474 	},
475 	{
476 		.fp0 = FPB0,
477 		.fp1 = FPB1,
478 		.cntr = DSPBCNTR,
479 		.conf = PIPEBCONF,
480 		.src = PIPEBSRC,
481 		.dpll = DPLL_B,
482 		.htotal = HTOTAL_B,
483 		.hblank = HBLANK_B,
484 		.hsync = HSYNC_B,
485 		.vtotal = VTOTAL_B,
486 		.vblank = VBLANK_B,
487 		.vsync = VSYNC_B,
488 		.stride = DSPBSTRIDE,
489 		.size = DSPBSIZE,
490 		.pos = DSPBPOS,
491 		.surf = DSPBSURF,
492 		.addr = DSPBBASE,
493 		.base = DSPBBASE,
494 		.status = PIPEBSTAT,
495 		.linoff = DSPBLINOFF,
496 		.tileoff = DSPBTILEOFF,
497 		.palette = PALETTE_B,
498 	},
499 };
500 
501 static int oaktrail_chip_setup(struct drm_device *dev)
502 {
503 	struct drm_psb_private *dev_priv = dev->dev_private;
504 	struct pci_dev *pdev = to_pci_dev(dev->dev);
505 	int ret;
506 
507 	if (pci_enable_msi(pdev))
508 		dev_warn(dev->dev, "Enabling MSI failed!\n");
509 
510 	dev_priv->regmap = oaktrail_regmap;
511 
512 	ret = mid_chip_setup(dev);
513 	if (ret < 0)
514 		return ret;
515 	if (!dev_priv->has_gct) {
516 		/* Now pull the BIOS data */
517 		psb_intel_opregion_init(dev);
518 		psb_intel_init_bios(dev);
519 	}
520 	gma_intel_setup_gmbus(dev);
521 	oaktrail_hdmi_setup(dev);
522 	return 0;
523 }
524 
525 static void oaktrail_teardown(struct drm_device *dev)
526 {
527 	struct drm_psb_private *dev_priv = dev->dev_private;
528 
529 	gma_intel_teardown_gmbus(dev);
530 	oaktrail_hdmi_teardown(dev);
531 	if (!dev_priv->has_gct)
532 		psb_intel_destroy_bios(dev);
533 }
534 
535 const struct psb_ops oaktrail_chip_ops = {
536 	.name = "Oaktrail",
537 	.pipes = 2,
538 	.crtcs = 2,
539 	.hdmi_mask = (1 << 1),
540 	.lvds_mask = (1 << 0),
541 	.sdvo_mask = (1 << 1),
542 	.cursor_needs_phys = 0,
543 	.sgx_offset = MRST_SGX_OFFSET,
544 
545 	.chip_setup = oaktrail_chip_setup,
546 	.chip_teardown = oaktrail_teardown,
547 	.crtc_helper = &oaktrail_helper_funcs,
548 	.crtc_funcs = &gma_intel_crtc_funcs,
549 
550 	.output_init = oaktrail_output_init,
551 
552 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
553 	.backlight_init = oaktrail_backlight_init,
554 #endif
555 
556 	.save_regs = oaktrail_save_display_registers,
557 	.restore_regs = oaktrail_restore_display_registers,
558 	.save_crtc = gma_crtc_save,
559 	.restore_crtc = gma_crtc_restore,
560 	.power_down = oaktrail_power_down,
561 	.power_up = oaktrail_power_up,
562 
563 	.i2c_bus = 1,
564 };
565