xref: /openbmc/linux/drivers/gpu/drm/gma500/intel_i2c.c (revision d78c317f)
1 /*
2  * Copyright © 2006-2007 Intel Corporation
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program; if not, write to the Free Software Foundation, Inc.,
15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16  *
17  * Authors:
18  *	Eric Anholt <eric@anholt.net>
19  */
20 #include <linux/export.h>
21 #include <linux/i2c.h>
22 #include <linux/i2c-algo-bit.h>
23 
24 #include "psb_drv.h"
25 #include "psb_intel_reg.h"
26 
27 /*
28  * Intel GPIO access functions
29  */
30 
31 #define I2C_RISEFALL_TIME 20
32 
33 static int get_clock(void *data)
34 {
35 	struct psb_intel_i2c_chan *chan = data;
36 	struct drm_device *dev = chan->drm_dev;
37 	u32 val;
38 
39 	val = REG_READ(chan->reg);
40 	return (val & GPIO_CLOCK_VAL_IN) != 0;
41 }
42 
43 static int get_data(void *data)
44 {
45 	struct psb_intel_i2c_chan *chan = data;
46 	struct drm_device *dev = chan->drm_dev;
47 	u32 val;
48 
49 	val = REG_READ(chan->reg);
50 	return (val & GPIO_DATA_VAL_IN) != 0;
51 }
52 
53 static void set_clock(void *data, int state_high)
54 {
55 	struct psb_intel_i2c_chan *chan = data;
56 	struct drm_device *dev = chan->drm_dev;
57 	u32 reserved = 0, clock_bits;
58 
59 	/* On most chips, these bits must be preserved in software. */
60 	reserved =
61 		    REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
62 					   GPIO_CLOCK_PULLUP_DISABLE);
63 
64 	if (state_high)
65 		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
66 	else
67 		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
68 		    GPIO_CLOCK_VAL_MASK;
69 	REG_WRITE(chan->reg, reserved | clock_bits);
70 	udelay(I2C_RISEFALL_TIME);	/* wait for the line to change state */
71 }
72 
73 static void set_data(void *data, int state_high)
74 {
75 	struct psb_intel_i2c_chan *chan = data;
76 	struct drm_device *dev = chan->drm_dev;
77 	u32 reserved = 0, data_bits;
78 
79 	/* On most chips, these bits must be preserved in software. */
80 	reserved =
81 		    REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
82 					   GPIO_CLOCK_PULLUP_DISABLE);
83 
84 	if (state_high)
85 		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
86 	else
87 		data_bits =
88 		    GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
89 		    GPIO_DATA_VAL_MASK;
90 
91 	REG_WRITE(chan->reg, reserved | data_bits);
92 	udelay(I2C_RISEFALL_TIME);	/* wait for the line to change state */
93 }
94 
95 /**
96  * psb_intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg
97  * @dev: DRM device
98  * @output: driver specific output device
99  * @reg: GPIO reg to use
100  * @name: name for this bus
101  *
102  * Creates and registers a new i2c bus with the Linux i2c layer, for use
103  * in output probing and control (e.g. DDC or SDVO control functions).
104  *
105  * Possible values for @reg include:
106  *   %GPIOA
107  *   %GPIOB
108  *   %GPIOC
109  *   %GPIOD
110  *   %GPIOE
111  *   %GPIOF
112  *   %GPIOG
113  *   %GPIOH
114  * see PRM for details on how these different busses are used.
115  */
116 struct psb_intel_i2c_chan *psb_intel_i2c_create(struct drm_device *dev,
117 					const u32 reg, const char *name)
118 {
119 	struct psb_intel_i2c_chan *chan;
120 
121 	chan = kzalloc(sizeof(struct psb_intel_i2c_chan), GFP_KERNEL);
122 	if (!chan)
123 		goto out_free;
124 
125 	chan->drm_dev = dev;
126 	chan->reg = reg;
127 	snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
128 	chan->adapter.owner = THIS_MODULE;
129 	chan->adapter.algo_data = &chan->algo;
130 	chan->adapter.dev.parent = &dev->pdev->dev;
131 	chan->algo.setsda = set_data;
132 	chan->algo.setscl = set_clock;
133 	chan->algo.getsda = get_data;
134 	chan->algo.getscl = get_clock;
135 	chan->algo.udelay = 20;
136 	chan->algo.timeout = usecs_to_jiffies(2200);
137 	chan->algo.data = chan;
138 
139 	i2c_set_adapdata(&chan->adapter, chan);
140 
141 	if (i2c_bit_add_bus(&chan->adapter))
142 		goto out_free;
143 
144 	/* JJJ:  raise SCL and SDA? */
145 	set_data(chan, 1);
146 	set_clock(chan, 1);
147 	udelay(20);
148 
149 	return chan;
150 
151 out_free:
152 	kfree(chan);
153 	return NULL;
154 }
155 
156 /**
157  * psb_intel_i2c_destroy - unregister and free i2c bus resources
158  * @output: channel to free
159  *
160  * Unregister the adapter from the i2c layer, then free the structure.
161  */
162 void psb_intel_i2c_destroy(struct psb_intel_i2c_chan *chan)
163 {
164 	if (!chan)
165 		return;
166 
167 	i2c_del_adapter(&chan->adapter);
168 	kfree(chan);
169 }
170