1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright © 2006-2011 Intel Corporation 4 * 5 * Authors: 6 * Eric Anholt <eric@anholt.net> 7 * Patrik Jakobsson <patrik.r.jakobsson@gmail.com> 8 */ 9 10 #include <linux/delay.h> 11 #include <linux/highmem.h> 12 13 #include <drm/drm_crtc.h> 14 #include <drm/drm_fourcc.h> 15 #include <drm/drm_framebuffer.h> 16 #include <drm/drm_vblank.h> 17 18 #include "framebuffer.h" 19 #include "gem.h" 20 #include "gma_display.h" 21 #include "psb_irq.h" 22 #include "psb_intel_drv.h" 23 #include "psb_intel_reg.h" 24 25 /* 26 * Returns whether any output on the specified pipe is of the specified type 27 */ 28 bool gma_pipe_has_type(struct drm_crtc *crtc, int type) 29 { 30 struct drm_device *dev = crtc->dev; 31 struct drm_connector_list_iter conn_iter; 32 struct drm_connector *connector; 33 34 drm_connector_list_iter_begin(dev, &conn_iter); 35 drm_for_each_connector_iter(connector, &conn_iter) { 36 if (connector->encoder && connector->encoder->crtc == crtc) { 37 struct gma_encoder *gma_encoder = 38 gma_attached_encoder(connector); 39 if (gma_encoder->type == type) { 40 drm_connector_list_iter_end(&conn_iter); 41 return true; 42 } 43 } 44 } 45 drm_connector_list_iter_end(&conn_iter); 46 47 return false; 48 } 49 50 void gma_wait_for_vblank(struct drm_device *dev) 51 { 52 /* Wait for 20ms, i.e. one cycle at 50hz. */ 53 mdelay(20); 54 } 55 56 int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y, 57 struct drm_framebuffer *old_fb) 58 { 59 struct drm_device *dev = crtc->dev; 60 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 61 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 62 struct drm_framebuffer *fb = crtc->primary->fb; 63 struct psb_gem_object *pobj; 64 int pipe = gma_crtc->pipe; 65 const struct psb_offset *map = &dev_priv->regmap[pipe]; 66 unsigned long start, offset; 67 u32 dspcntr; 68 int ret = 0; 69 70 if (!gma_power_begin(dev, true)) 71 return 0; 72 73 /* no fb bound */ 74 if (!fb) { 75 dev_err(dev->dev, "No FB bound\n"); 76 goto gma_pipe_cleaner; 77 } 78 79 pobj = to_psb_gem_object(fb->obj[0]); 80 81 /* We are displaying this buffer, make sure it is actually loaded 82 into the GTT */ 83 ret = psb_gem_pin(pobj); 84 if (ret < 0) 85 goto gma_pipe_set_base_exit; 86 start = pobj->offset; 87 offset = y * fb->pitches[0] + x * fb->format->cpp[0]; 88 89 REG_WRITE(map->stride, fb->pitches[0]); 90 91 dspcntr = REG_READ(map->cntr); 92 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; 93 94 switch (fb->format->cpp[0] * 8) { 95 case 8: 96 dspcntr |= DISPPLANE_8BPP; 97 break; 98 case 16: 99 if (fb->format->depth == 15) 100 dspcntr |= DISPPLANE_15_16BPP; 101 else 102 dspcntr |= DISPPLANE_16BPP; 103 break; 104 case 24: 105 case 32: 106 dspcntr |= DISPPLANE_32BPP_NO_ALPHA; 107 break; 108 default: 109 dev_err(dev->dev, "Unknown color depth\n"); 110 ret = -EINVAL; 111 goto gma_pipe_set_base_exit; 112 } 113 REG_WRITE(map->cntr, dspcntr); 114 115 dev_dbg(dev->dev, 116 "Writing base %08lX %08lX %d %d\n", start, offset, x, y); 117 118 /* FIXME: Investigate whether this really is the base for psb and why 119 the linear offset is named base for the other chips. map->surf 120 should be the base and map->linoff the offset for all chips */ 121 if (IS_PSB(dev)) { 122 REG_WRITE(map->base, offset + start); 123 REG_READ(map->base); 124 } else { 125 REG_WRITE(map->base, offset); 126 REG_READ(map->base); 127 REG_WRITE(map->surf, start); 128 REG_READ(map->surf); 129 } 130 131 gma_pipe_cleaner: 132 /* If there was a previous display we can now unpin it */ 133 if (old_fb) 134 psb_gem_unpin(to_psb_gem_object(old_fb->obj[0])); 135 136 gma_pipe_set_base_exit: 137 gma_power_end(dev); 138 return ret; 139 } 140 141 /* Loads the palette/gamma unit for the CRTC with the prepared values */ 142 void gma_crtc_load_lut(struct drm_crtc *crtc) 143 { 144 struct drm_device *dev = crtc->dev; 145 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 146 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 147 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 148 int palreg = map->palette; 149 u16 *r, *g, *b; 150 int i; 151 152 /* The clocks have to be on to load the palette. */ 153 if (!crtc->enabled) 154 return; 155 156 r = crtc->gamma_store; 157 g = r + crtc->gamma_size; 158 b = g + crtc->gamma_size; 159 160 if (gma_power_begin(dev, false)) { 161 for (i = 0; i < 256; i++) { 162 REG_WRITE(palreg + 4 * i, 163 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | 164 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | 165 ((*b++ >> 8) + gma_crtc->lut_adj[i])); 166 } 167 gma_power_end(dev); 168 } else { 169 for (i = 0; i < 256; i++) { 170 /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */ 171 dev_priv->regs.pipe[0].palette[i] = 172 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | 173 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | 174 ((*b++ >> 8) + gma_crtc->lut_adj[i]); 175 } 176 177 } 178 } 179 180 static int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, 181 u16 *blue, u32 size, 182 struct drm_modeset_acquire_ctx *ctx) 183 { 184 gma_crtc_load_lut(crtc); 185 186 return 0; 187 } 188 189 /* 190 * Sets the power management mode of the pipe and plane. 191 * 192 * This code should probably grow support for turning the cursor off and back 193 * on appropriately at the same time as we're turning the pipe off/on. 194 */ 195 void gma_crtc_dpms(struct drm_crtc *crtc, int mode) 196 { 197 struct drm_device *dev = crtc->dev; 198 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 199 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 200 int pipe = gma_crtc->pipe; 201 const struct psb_offset *map = &dev_priv->regmap[pipe]; 202 u32 temp; 203 204 /* XXX: When our outputs are all unaware of DPMS modes other than off 205 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. 206 */ 207 208 if (IS_CDV(dev)) 209 dev_priv->ops->disable_sr(dev); 210 211 switch (mode) { 212 case DRM_MODE_DPMS_ON: 213 case DRM_MODE_DPMS_STANDBY: 214 case DRM_MODE_DPMS_SUSPEND: 215 if (gma_crtc->active) 216 break; 217 218 gma_crtc->active = true; 219 220 /* Enable the DPLL */ 221 temp = REG_READ(map->dpll); 222 if ((temp & DPLL_VCO_ENABLE) == 0) { 223 REG_WRITE(map->dpll, temp); 224 REG_READ(map->dpll); 225 /* Wait for the clocks to stabilize. */ 226 udelay(150); 227 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 228 REG_READ(map->dpll); 229 /* Wait for the clocks to stabilize. */ 230 udelay(150); 231 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 232 REG_READ(map->dpll); 233 /* Wait for the clocks to stabilize. */ 234 udelay(150); 235 } 236 237 /* Enable the plane */ 238 temp = REG_READ(map->cntr); 239 if ((temp & DISPLAY_PLANE_ENABLE) == 0) { 240 REG_WRITE(map->cntr, 241 temp | DISPLAY_PLANE_ENABLE); 242 /* Flush the plane changes */ 243 REG_WRITE(map->base, REG_READ(map->base)); 244 } 245 246 udelay(150); 247 248 /* Enable the pipe */ 249 temp = REG_READ(map->conf); 250 if ((temp & PIPEACONF_ENABLE) == 0) 251 REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); 252 253 temp = REG_READ(map->status); 254 temp &= ~(0xFFFF); 255 temp |= PIPE_FIFO_UNDERRUN; 256 REG_WRITE(map->status, temp); 257 REG_READ(map->status); 258 259 gma_crtc_load_lut(crtc); 260 261 /* Give the overlay scaler a chance to enable 262 * if it's on this pipe */ 263 /* psb_intel_crtc_dpms_video(crtc, true); TODO */ 264 265 drm_crtc_vblank_on(crtc); 266 break; 267 case DRM_MODE_DPMS_OFF: 268 if (!gma_crtc->active) 269 break; 270 271 gma_crtc->active = false; 272 273 /* Give the overlay scaler a chance to disable 274 * if it's on this pipe */ 275 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ 276 277 /* Disable the VGA plane that we never use */ 278 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); 279 280 /* Turn off vblank interrupts */ 281 drm_crtc_vblank_off(crtc); 282 283 /* Wait for vblank for the disable to take effect */ 284 gma_wait_for_vblank(dev); 285 286 /* Disable plane */ 287 temp = REG_READ(map->cntr); 288 if ((temp & DISPLAY_PLANE_ENABLE) != 0) { 289 REG_WRITE(map->cntr, 290 temp & ~DISPLAY_PLANE_ENABLE); 291 /* Flush the plane changes */ 292 REG_WRITE(map->base, REG_READ(map->base)); 293 REG_READ(map->base); 294 } 295 296 /* Disable pipe */ 297 temp = REG_READ(map->conf); 298 if ((temp & PIPEACONF_ENABLE) != 0) { 299 REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); 300 REG_READ(map->conf); 301 } 302 303 /* Wait for vblank for the disable to take effect. */ 304 gma_wait_for_vblank(dev); 305 306 udelay(150); 307 308 /* Disable DPLL */ 309 temp = REG_READ(map->dpll); 310 if ((temp & DPLL_VCO_ENABLE) != 0) { 311 REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); 312 REG_READ(map->dpll); 313 } 314 315 /* Wait for the clocks to turn off. */ 316 udelay(150); 317 break; 318 } 319 320 if (IS_CDV(dev)) 321 dev_priv->ops->update_wm(dev, crtc); 322 323 /* Set FIFO watermarks */ 324 REG_WRITE(DSPARB, 0x3F3E); 325 } 326 327 static int gma_crtc_cursor_set(struct drm_crtc *crtc, 328 struct drm_file *file_priv, uint32_t handle, 329 uint32_t width, uint32_t height) 330 { 331 struct drm_device *dev = crtc->dev; 332 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 333 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 334 int pipe = gma_crtc->pipe; 335 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; 336 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; 337 uint32_t temp; 338 size_t addr = 0; 339 struct psb_gem_object *pobj; 340 struct psb_gem_object *cursor_pobj = gma_crtc->cursor_pobj; 341 struct drm_gem_object *obj; 342 void *tmp_dst; 343 int ret = 0, i, cursor_pages; 344 345 /* If we didn't get a handle then turn the cursor off */ 346 if (!handle) { 347 temp = CURSOR_MODE_DISABLE; 348 if (gma_power_begin(dev, false)) { 349 REG_WRITE(control, temp); 350 REG_WRITE(base, 0); 351 gma_power_end(dev); 352 } 353 354 /* Unpin the old GEM object */ 355 if (gma_crtc->cursor_obj) { 356 pobj = to_psb_gem_object(gma_crtc->cursor_obj); 357 psb_gem_unpin(pobj); 358 drm_gem_object_put(gma_crtc->cursor_obj); 359 gma_crtc->cursor_obj = NULL; 360 } 361 return 0; 362 } 363 364 /* Currently we only support 64x64 cursors */ 365 if (width != 64 || height != 64) { 366 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n"); 367 return -EINVAL; 368 } 369 370 obj = drm_gem_object_lookup(file_priv, handle); 371 if (!obj) { 372 ret = -ENOENT; 373 goto unlock; 374 } 375 376 if (obj->size < width * height * 4) { 377 dev_dbg(dev->dev, "Buffer is too small\n"); 378 ret = -ENOMEM; 379 goto unref_cursor; 380 } 381 382 pobj = to_psb_gem_object(obj); 383 384 /* Pin the memory into the GTT */ 385 ret = psb_gem_pin(pobj); 386 if (ret) { 387 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); 388 goto unref_cursor; 389 } 390 391 if (dev_priv->ops->cursor_needs_phys) { 392 if (!cursor_pobj) { 393 dev_err(dev->dev, "No hardware cursor mem available"); 394 ret = -ENOMEM; 395 goto unref_cursor; 396 } 397 398 cursor_pages = obj->size / PAGE_SIZE; 399 if (cursor_pages > 4) 400 cursor_pages = 4; /* Prevent overflow */ 401 402 /* Copy the cursor to cursor mem */ 403 tmp_dst = dev_priv->vram_addr + cursor_pobj->offset; 404 for (i = 0; i < cursor_pages; i++) { 405 memcpy_from_page(tmp_dst, pobj->pages[i], 0, PAGE_SIZE); 406 tmp_dst += PAGE_SIZE; 407 } 408 409 addr = gma_crtc->cursor_addr; 410 } else { 411 addr = pobj->offset; 412 gma_crtc->cursor_addr = addr; 413 } 414 415 temp = 0; 416 /* set the pipe for the cursor */ 417 temp |= (pipe << 28); 418 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; 419 420 if (gma_power_begin(dev, false)) { 421 REG_WRITE(control, temp); 422 REG_WRITE(base, addr); 423 gma_power_end(dev); 424 } 425 426 /* unpin the old bo */ 427 if (gma_crtc->cursor_obj) { 428 pobj = to_psb_gem_object(gma_crtc->cursor_obj); 429 psb_gem_unpin(pobj); 430 drm_gem_object_put(gma_crtc->cursor_obj); 431 } 432 433 gma_crtc->cursor_obj = obj; 434 unlock: 435 return ret; 436 437 unref_cursor: 438 drm_gem_object_put(obj); 439 return ret; 440 } 441 442 static int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) 443 { 444 struct drm_device *dev = crtc->dev; 445 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 446 int pipe = gma_crtc->pipe; 447 uint32_t temp = 0; 448 uint32_t addr; 449 450 if (x < 0) { 451 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); 452 x = -x; 453 } 454 if (y < 0) { 455 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); 456 y = -y; 457 } 458 459 temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); 460 temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); 461 462 addr = gma_crtc->cursor_addr; 463 464 if (gma_power_begin(dev, false)) { 465 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); 466 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); 467 gma_power_end(dev); 468 } 469 return 0; 470 } 471 472 void gma_crtc_prepare(struct drm_crtc *crtc) 473 { 474 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 475 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 476 } 477 478 void gma_crtc_commit(struct drm_crtc *crtc) 479 { 480 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 481 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); 482 } 483 484 void gma_crtc_disable(struct drm_crtc *crtc) 485 { 486 struct psb_gem_object *pobj; 487 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 488 489 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 490 491 if (crtc->primary->fb) { 492 pobj = to_psb_gem_object(crtc->primary->fb->obj[0]); 493 psb_gem_unpin(pobj); 494 } 495 } 496 497 void gma_crtc_destroy(struct drm_crtc *crtc) 498 { 499 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 500 501 if (gma_crtc->cursor_pobj) 502 drm_gem_object_put(&gma_crtc->cursor_pobj->base); 503 504 kfree(gma_crtc->crtc_state); 505 drm_crtc_cleanup(crtc); 506 kfree(gma_crtc); 507 } 508 509 int gma_crtc_page_flip(struct drm_crtc *crtc, 510 struct drm_framebuffer *fb, 511 struct drm_pending_vblank_event *event, 512 uint32_t page_flip_flags, 513 struct drm_modeset_acquire_ctx *ctx) 514 { 515 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 516 struct drm_framebuffer *current_fb = crtc->primary->fb; 517 struct drm_framebuffer *old_fb = crtc->primary->old_fb; 518 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 519 struct drm_device *dev = crtc->dev; 520 unsigned long flags; 521 int ret; 522 523 if (!crtc_funcs->mode_set_base) 524 return -EINVAL; 525 526 /* Using mode_set_base requires the new fb to be set already. */ 527 crtc->primary->fb = fb; 528 529 if (event) { 530 spin_lock_irqsave(&dev->event_lock, flags); 531 532 WARN_ON(drm_crtc_vblank_get(crtc) != 0); 533 534 gma_crtc->page_flip_event = event; 535 536 /* Call this locked if we want an event at vblank interrupt. */ 537 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); 538 if (ret) { 539 gma_crtc->page_flip_event = NULL; 540 drm_crtc_vblank_put(crtc); 541 } 542 543 spin_unlock_irqrestore(&dev->event_lock, flags); 544 } else { 545 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); 546 } 547 548 /* Restore previous fb in case of failure. */ 549 if (ret) 550 crtc->primary->fb = current_fb; 551 552 return ret; 553 } 554 555 int gma_crtc_set_config(struct drm_mode_set *set, 556 struct drm_modeset_acquire_ctx *ctx) 557 { 558 struct drm_device *dev = set->crtc->dev; 559 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 560 int ret; 561 562 if (!dev_priv->rpm_enabled) 563 return drm_crtc_helper_set_config(set, ctx); 564 565 pm_runtime_forbid(dev->dev); 566 ret = drm_crtc_helper_set_config(set, ctx); 567 pm_runtime_allow(dev->dev); 568 569 return ret; 570 } 571 572 const struct drm_crtc_funcs gma_crtc_funcs = { 573 .cursor_set = gma_crtc_cursor_set, 574 .cursor_move = gma_crtc_cursor_move, 575 .gamma_set = gma_crtc_gamma_set, 576 .set_config = gma_crtc_set_config, 577 .destroy = gma_crtc_destroy, 578 .page_flip = gma_crtc_page_flip, 579 .enable_vblank = gma_crtc_enable_vblank, 580 .disable_vblank = gma_crtc_disable_vblank, 581 .get_vblank_counter = gma_crtc_get_vblank_counter, 582 }; 583 584 /* 585 * Save HW states of given crtc 586 */ 587 void gma_crtc_save(struct drm_crtc *crtc) 588 { 589 struct drm_device *dev = crtc->dev; 590 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 591 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 592 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 593 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 594 uint32_t palette_reg; 595 int i; 596 597 if (!crtc_state) { 598 dev_err(dev->dev, "No CRTC state found\n"); 599 return; 600 } 601 602 crtc_state->saveDSPCNTR = REG_READ(map->cntr); 603 crtc_state->savePIPECONF = REG_READ(map->conf); 604 crtc_state->savePIPESRC = REG_READ(map->src); 605 crtc_state->saveFP0 = REG_READ(map->fp0); 606 crtc_state->saveFP1 = REG_READ(map->fp1); 607 crtc_state->saveDPLL = REG_READ(map->dpll); 608 crtc_state->saveHTOTAL = REG_READ(map->htotal); 609 crtc_state->saveHBLANK = REG_READ(map->hblank); 610 crtc_state->saveHSYNC = REG_READ(map->hsync); 611 crtc_state->saveVTOTAL = REG_READ(map->vtotal); 612 crtc_state->saveVBLANK = REG_READ(map->vblank); 613 crtc_state->saveVSYNC = REG_READ(map->vsync); 614 crtc_state->saveDSPSTRIDE = REG_READ(map->stride); 615 616 /* NOTE: DSPSIZE DSPPOS only for psb */ 617 crtc_state->saveDSPSIZE = REG_READ(map->size); 618 crtc_state->saveDSPPOS = REG_READ(map->pos); 619 620 crtc_state->saveDSPBASE = REG_READ(map->base); 621 622 palette_reg = map->palette; 623 for (i = 0; i < 256; ++i) 624 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2)); 625 } 626 627 /* 628 * Restore HW states of given crtc 629 */ 630 void gma_crtc_restore(struct drm_crtc *crtc) 631 { 632 struct drm_device *dev = crtc->dev; 633 struct drm_psb_private *dev_priv = to_drm_psb_private(dev); 634 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 635 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 636 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 637 uint32_t palette_reg; 638 int i; 639 640 if (!crtc_state) { 641 dev_err(dev->dev, "No crtc state\n"); 642 return; 643 } 644 645 if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { 646 REG_WRITE(map->dpll, 647 crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); 648 REG_READ(map->dpll); 649 udelay(150); 650 } 651 652 REG_WRITE(map->fp0, crtc_state->saveFP0); 653 REG_READ(map->fp0); 654 655 REG_WRITE(map->fp1, crtc_state->saveFP1); 656 REG_READ(map->fp1); 657 658 REG_WRITE(map->dpll, crtc_state->saveDPLL); 659 REG_READ(map->dpll); 660 udelay(150); 661 662 REG_WRITE(map->htotal, crtc_state->saveHTOTAL); 663 REG_WRITE(map->hblank, crtc_state->saveHBLANK); 664 REG_WRITE(map->hsync, crtc_state->saveHSYNC); 665 REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); 666 REG_WRITE(map->vblank, crtc_state->saveVBLANK); 667 REG_WRITE(map->vsync, crtc_state->saveVSYNC); 668 REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); 669 670 REG_WRITE(map->size, crtc_state->saveDSPSIZE); 671 REG_WRITE(map->pos, crtc_state->saveDSPPOS); 672 673 REG_WRITE(map->src, crtc_state->savePIPESRC); 674 REG_WRITE(map->base, crtc_state->saveDSPBASE); 675 REG_WRITE(map->conf, crtc_state->savePIPECONF); 676 677 gma_wait_for_vblank(dev); 678 679 REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); 680 REG_WRITE(map->base, crtc_state->saveDSPBASE); 681 682 gma_wait_for_vblank(dev); 683 684 palette_reg = map->palette; 685 for (i = 0; i < 256; ++i) 686 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]); 687 } 688 689 void gma_encoder_prepare(struct drm_encoder *encoder) 690 { 691 const struct drm_encoder_helper_funcs *encoder_funcs = 692 encoder->helper_private; 693 /* lvds has its own version of prepare see psb_intel_lvds_prepare */ 694 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); 695 } 696 697 void gma_encoder_commit(struct drm_encoder *encoder) 698 { 699 const struct drm_encoder_helper_funcs *encoder_funcs = 700 encoder->helper_private; 701 /* lvds has its own version of commit see psb_intel_lvds_commit */ 702 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); 703 } 704 705 void gma_encoder_destroy(struct drm_encoder *encoder) 706 { 707 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 708 709 drm_encoder_cleanup(encoder); 710 kfree(intel_encoder); 711 } 712 713 /* Currently there is only a 1:1 mapping of encoders and connectors */ 714 struct drm_encoder *gma_best_encoder(struct drm_connector *connector) 715 { 716 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 717 718 return &gma_encoder->base; 719 } 720 721 void gma_connector_attach_encoder(struct gma_connector *connector, 722 struct gma_encoder *encoder) 723 { 724 connector->encoder = encoder; 725 drm_connector_attach_encoder(&connector->base, 726 &encoder->base); 727 } 728 729 #define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; } 730 731 bool gma_pll_is_valid(struct drm_crtc *crtc, 732 const struct gma_limit_t *limit, 733 struct gma_clock_t *clock) 734 { 735 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) 736 GMA_PLL_INVALID("p1 out of range"); 737 if (clock->p < limit->p.min || limit->p.max < clock->p) 738 GMA_PLL_INVALID("p out of range"); 739 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) 740 GMA_PLL_INVALID("m2 out of range"); 741 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) 742 GMA_PLL_INVALID("m1 out of range"); 743 /* On CDV m1 is always 0 */ 744 if (clock->m1 <= clock->m2 && clock->m1 != 0) 745 GMA_PLL_INVALID("m1 <= m2 && m1 != 0"); 746 if (clock->m < limit->m.min || limit->m.max < clock->m) 747 GMA_PLL_INVALID("m out of range"); 748 if (clock->n < limit->n.min || limit->n.max < clock->n) 749 GMA_PLL_INVALID("n out of range"); 750 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) 751 GMA_PLL_INVALID("vco out of range"); 752 /* XXX: We may need to be checking "Dot clock" 753 * depending on the multiplier, connector, etc., 754 * rather than just a single range. 755 */ 756 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) 757 GMA_PLL_INVALID("dot out of range"); 758 759 return true; 760 } 761 762 bool gma_find_best_pll(const struct gma_limit_t *limit, 763 struct drm_crtc *crtc, int target, int refclk, 764 struct gma_clock_t *best_clock) 765 { 766 struct drm_device *dev = crtc->dev; 767 const struct gma_clock_funcs *clock_funcs = 768 to_gma_crtc(crtc)->clock_funcs; 769 struct gma_clock_t clock; 770 int err = target; 771 772 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 773 (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { 774 /* 775 * For LVDS, if the panel is on, just rely on its current 776 * settings for dual-channel. We haven't figured out how to 777 * reliably set up different single/dual channel state, if we 778 * even can. 779 */ 780 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == 781 LVDS_CLKB_POWER_UP) 782 clock.p2 = limit->p2.p2_fast; 783 else 784 clock.p2 = limit->p2.p2_slow; 785 } else { 786 if (target < limit->p2.dot_limit) 787 clock.p2 = limit->p2.p2_slow; 788 else 789 clock.p2 = limit->p2.p2_fast; 790 } 791 792 memset(best_clock, 0, sizeof(*best_clock)); 793 794 /* m1 is always 0 on CDV so the outmost loop will run just once */ 795 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { 796 for (clock.m2 = limit->m2.min; 797 (clock.m2 < clock.m1 || clock.m1 == 0) && 798 clock.m2 <= limit->m2.max; clock.m2++) { 799 for (clock.n = limit->n.min; 800 clock.n <= limit->n.max; clock.n++) { 801 for (clock.p1 = limit->p1.min; 802 clock.p1 <= limit->p1.max; 803 clock.p1++) { 804 int this_err; 805 806 clock_funcs->clock(refclk, &clock); 807 808 if (!clock_funcs->pll_is_valid(crtc, 809 limit, &clock)) 810 continue; 811 812 this_err = abs(clock.dot - target); 813 if (this_err < err) { 814 *best_clock = clock; 815 err = this_err; 816 } 817 } 818 } 819 } 820 } 821 822 return err != target; 823 } 824