1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright © 2006-2011 Intel Corporation 4 * 5 * Authors: 6 * Eric Anholt <eric@anholt.net> 7 * Patrik Jakobsson <patrik.r.jakobsson@gmail.com> 8 */ 9 10 #include <linux/delay.h> 11 #include <linux/highmem.h> 12 13 #include <drm/drm_crtc.h> 14 #include <drm/drm_fourcc.h> 15 #include <drm/drm_vblank.h> 16 17 #include "framebuffer.h" 18 #include "gma_display.h" 19 #include "psb_drv.h" 20 #include "psb_intel_drv.h" 21 #include "psb_intel_reg.h" 22 23 /** 24 * Returns whether any output on the specified pipe is of the specified type 25 */ 26 bool gma_pipe_has_type(struct drm_crtc *crtc, int type) 27 { 28 struct drm_device *dev = crtc->dev; 29 struct drm_mode_config *mode_config = &dev->mode_config; 30 struct drm_connector *l_entry; 31 32 list_for_each_entry(l_entry, &mode_config->connector_list, head) { 33 if (l_entry->encoder && l_entry->encoder->crtc == crtc) { 34 struct gma_encoder *gma_encoder = 35 gma_attached_encoder(l_entry); 36 if (gma_encoder->type == type) 37 return true; 38 } 39 } 40 41 return false; 42 } 43 44 void gma_wait_for_vblank(struct drm_device *dev) 45 { 46 /* Wait for 20ms, i.e. one cycle at 50hz. */ 47 mdelay(20); 48 } 49 50 int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y, 51 struct drm_framebuffer *old_fb) 52 { 53 struct drm_device *dev = crtc->dev; 54 struct drm_psb_private *dev_priv = dev->dev_private; 55 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 56 struct drm_framebuffer *fb = crtc->primary->fb; 57 struct gtt_range *gtt; 58 int pipe = gma_crtc->pipe; 59 const struct psb_offset *map = &dev_priv->regmap[pipe]; 60 unsigned long start, offset; 61 u32 dspcntr; 62 int ret = 0; 63 64 if (!gma_power_begin(dev, true)) 65 return 0; 66 67 /* no fb bound */ 68 if (!fb) { 69 dev_err(dev->dev, "No FB bound\n"); 70 goto gma_pipe_cleaner; 71 } 72 73 gtt = to_gtt_range(fb->obj[0]); 74 75 /* We are displaying this buffer, make sure it is actually loaded 76 into the GTT */ 77 ret = psb_gtt_pin(gtt); 78 if (ret < 0) 79 goto gma_pipe_set_base_exit; 80 start = gtt->offset; 81 offset = y * fb->pitches[0] + x * fb->format->cpp[0]; 82 83 REG_WRITE(map->stride, fb->pitches[0]); 84 85 dspcntr = REG_READ(map->cntr); 86 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; 87 88 switch (fb->format->cpp[0] * 8) { 89 case 8: 90 dspcntr |= DISPPLANE_8BPP; 91 break; 92 case 16: 93 if (fb->format->depth == 15) 94 dspcntr |= DISPPLANE_15_16BPP; 95 else 96 dspcntr |= DISPPLANE_16BPP; 97 break; 98 case 24: 99 case 32: 100 dspcntr |= DISPPLANE_32BPP_NO_ALPHA; 101 break; 102 default: 103 dev_err(dev->dev, "Unknown color depth\n"); 104 ret = -EINVAL; 105 goto gma_pipe_set_base_exit; 106 } 107 REG_WRITE(map->cntr, dspcntr); 108 109 dev_dbg(dev->dev, 110 "Writing base %08lX %08lX %d %d\n", start, offset, x, y); 111 112 /* FIXME: Investigate whether this really is the base for psb and why 113 the linear offset is named base for the other chips. map->surf 114 should be the base and map->linoff the offset for all chips */ 115 if (IS_PSB(dev)) { 116 REG_WRITE(map->base, offset + start); 117 REG_READ(map->base); 118 } else { 119 REG_WRITE(map->base, offset); 120 REG_READ(map->base); 121 REG_WRITE(map->surf, start); 122 REG_READ(map->surf); 123 } 124 125 gma_pipe_cleaner: 126 /* If there was a previous display we can now unpin it */ 127 if (old_fb) 128 psb_gtt_unpin(to_gtt_range(old_fb->obj[0])); 129 130 gma_pipe_set_base_exit: 131 gma_power_end(dev); 132 return ret; 133 } 134 135 /* Loads the palette/gamma unit for the CRTC with the prepared values */ 136 void gma_crtc_load_lut(struct drm_crtc *crtc) 137 { 138 struct drm_device *dev = crtc->dev; 139 struct drm_psb_private *dev_priv = dev->dev_private; 140 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 141 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 142 int palreg = map->palette; 143 u16 *r, *g, *b; 144 int i; 145 146 /* The clocks have to be on to load the palette. */ 147 if (!crtc->enabled) 148 return; 149 150 r = crtc->gamma_store; 151 g = r + crtc->gamma_size; 152 b = g + crtc->gamma_size; 153 154 if (gma_power_begin(dev, false)) { 155 for (i = 0; i < 256; i++) { 156 REG_WRITE(palreg + 4 * i, 157 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | 158 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | 159 ((*b++ >> 8) + gma_crtc->lut_adj[i])); 160 } 161 gma_power_end(dev); 162 } else { 163 for (i = 0; i < 256; i++) { 164 /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */ 165 dev_priv->regs.pipe[0].palette[i] = 166 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | 167 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | 168 ((*b++ >> 8) + gma_crtc->lut_adj[i]); 169 } 170 171 } 172 } 173 174 int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, 175 u32 size, 176 struct drm_modeset_acquire_ctx *ctx) 177 { 178 gma_crtc_load_lut(crtc); 179 180 return 0; 181 } 182 183 /** 184 * Sets the power management mode of the pipe and plane. 185 * 186 * This code should probably grow support for turning the cursor off and back 187 * on appropriately at the same time as we're turning the pipe off/on. 188 */ 189 void gma_crtc_dpms(struct drm_crtc *crtc, int mode) 190 { 191 struct drm_device *dev = crtc->dev; 192 struct drm_psb_private *dev_priv = dev->dev_private; 193 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 194 int pipe = gma_crtc->pipe; 195 const struct psb_offset *map = &dev_priv->regmap[pipe]; 196 u32 temp; 197 198 /* XXX: When our outputs are all unaware of DPMS modes other than off 199 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. 200 */ 201 202 if (IS_CDV(dev)) 203 dev_priv->ops->disable_sr(dev); 204 205 switch (mode) { 206 case DRM_MODE_DPMS_ON: 207 case DRM_MODE_DPMS_STANDBY: 208 case DRM_MODE_DPMS_SUSPEND: 209 if (gma_crtc->active) 210 break; 211 212 gma_crtc->active = true; 213 214 /* Enable the DPLL */ 215 temp = REG_READ(map->dpll); 216 if ((temp & DPLL_VCO_ENABLE) == 0) { 217 REG_WRITE(map->dpll, temp); 218 REG_READ(map->dpll); 219 /* Wait for the clocks to stabilize. */ 220 udelay(150); 221 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 222 REG_READ(map->dpll); 223 /* Wait for the clocks to stabilize. */ 224 udelay(150); 225 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); 226 REG_READ(map->dpll); 227 /* Wait for the clocks to stabilize. */ 228 udelay(150); 229 } 230 231 /* Enable the plane */ 232 temp = REG_READ(map->cntr); 233 if ((temp & DISPLAY_PLANE_ENABLE) == 0) { 234 REG_WRITE(map->cntr, 235 temp | DISPLAY_PLANE_ENABLE); 236 /* Flush the plane changes */ 237 REG_WRITE(map->base, REG_READ(map->base)); 238 } 239 240 udelay(150); 241 242 /* Enable the pipe */ 243 temp = REG_READ(map->conf); 244 if ((temp & PIPEACONF_ENABLE) == 0) 245 REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); 246 247 temp = REG_READ(map->status); 248 temp &= ~(0xFFFF); 249 temp |= PIPE_FIFO_UNDERRUN; 250 REG_WRITE(map->status, temp); 251 REG_READ(map->status); 252 253 gma_crtc_load_lut(crtc); 254 255 /* Give the overlay scaler a chance to enable 256 * if it's on this pipe */ 257 /* psb_intel_crtc_dpms_video(crtc, true); TODO */ 258 259 drm_crtc_vblank_on(crtc); 260 break; 261 case DRM_MODE_DPMS_OFF: 262 if (!gma_crtc->active) 263 break; 264 265 gma_crtc->active = false; 266 267 /* Give the overlay scaler a chance to disable 268 * if it's on this pipe */ 269 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ 270 271 /* Disable the VGA plane that we never use */ 272 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); 273 274 /* Turn off vblank interrupts */ 275 drm_crtc_vblank_off(crtc); 276 277 /* Wait for vblank for the disable to take effect */ 278 gma_wait_for_vblank(dev); 279 280 /* Disable plane */ 281 temp = REG_READ(map->cntr); 282 if ((temp & DISPLAY_PLANE_ENABLE) != 0) { 283 REG_WRITE(map->cntr, 284 temp & ~DISPLAY_PLANE_ENABLE); 285 /* Flush the plane changes */ 286 REG_WRITE(map->base, REG_READ(map->base)); 287 REG_READ(map->base); 288 } 289 290 /* Disable pipe */ 291 temp = REG_READ(map->conf); 292 if ((temp & PIPEACONF_ENABLE) != 0) { 293 REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); 294 REG_READ(map->conf); 295 } 296 297 /* Wait for vblank for the disable to take effect. */ 298 gma_wait_for_vblank(dev); 299 300 udelay(150); 301 302 /* Disable DPLL */ 303 temp = REG_READ(map->dpll); 304 if ((temp & DPLL_VCO_ENABLE) != 0) { 305 REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); 306 REG_READ(map->dpll); 307 } 308 309 /* Wait for the clocks to turn off. */ 310 udelay(150); 311 break; 312 } 313 314 if (IS_CDV(dev)) 315 dev_priv->ops->update_wm(dev, crtc); 316 317 /* Set FIFO watermarks */ 318 REG_WRITE(DSPARB, 0x3F3E); 319 } 320 321 int gma_crtc_cursor_set(struct drm_crtc *crtc, 322 struct drm_file *file_priv, 323 uint32_t handle, 324 uint32_t width, uint32_t height) 325 { 326 struct drm_device *dev = crtc->dev; 327 struct drm_psb_private *dev_priv = dev->dev_private; 328 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 329 int pipe = gma_crtc->pipe; 330 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; 331 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; 332 uint32_t temp; 333 size_t addr = 0; 334 struct gtt_range *gt; 335 struct gtt_range *cursor_gt = gma_crtc->cursor_gt; 336 struct drm_gem_object *obj; 337 void *tmp_dst, *tmp_src; 338 int ret = 0, i, cursor_pages; 339 340 /* If we didn't get a handle then turn the cursor off */ 341 if (!handle) { 342 temp = CURSOR_MODE_DISABLE; 343 if (gma_power_begin(dev, false)) { 344 REG_WRITE(control, temp); 345 REG_WRITE(base, 0); 346 gma_power_end(dev); 347 } 348 349 /* Unpin the old GEM object */ 350 if (gma_crtc->cursor_obj) { 351 gt = container_of(gma_crtc->cursor_obj, 352 struct gtt_range, gem); 353 psb_gtt_unpin(gt); 354 drm_gem_object_put_unlocked(gma_crtc->cursor_obj); 355 gma_crtc->cursor_obj = NULL; 356 } 357 return 0; 358 } 359 360 /* Currently we only support 64x64 cursors */ 361 if (width != 64 || height != 64) { 362 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n"); 363 return -EINVAL; 364 } 365 366 obj = drm_gem_object_lookup(file_priv, handle); 367 if (!obj) { 368 ret = -ENOENT; 369 goto unlock; 370 } 371 372 if (obj->size < width * height * 4) { 373 dev_dbg(dev->dev, "Buffer is too small\n"); 374 ret = -ENOMEM; 375 goto unref_cursor; 376 } 377 378 gt = container_of(obj, struct gtt_range, gem); 379 380 /* Pin the memory into the GTT */ 381 ret = psb_gtt_pin(gt); 382 if (ret) { 383 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); 384 goto unref_cursor; 385 } 386 387 if (dev_priv->ops->cursor_needs_phys) { 388 if (cursor_gt == NULL) { 389 dev_err(dev->dev, "No hardware cursor mem available"); 390 ret = -ENOMEM; 391 goto unref_cursor; 392 } 393 394 /* Prevent overflow */ 395 if (gt->npage > 4) 396 cursor_pages = 4; 397 else 398 cursor_pages = gt->npage; 399 400 /* Copy the cursor to cursor mem */ 401 tmp_dst = dev_priv->vram_addr + cursor_gt->offset; 402 for (i = 0; i < cursor_pages; i++) { 403 tmp_src = kmap(gt->pages[i]); 404 memcpy(tmp_dst, tmp_src, PAGE_SIZE); 405 kunmap(gt->pages[i]); 406 tmp_dst += PAGE_SIZE; 407 } 408 409 addr = gma_crtc->cursor_addr; 410 } else { 411 addr = gt->offset; 412 gma_crtc->cursor_addr = addr; 413 } 414 415 temp = 0; 416 /* set the pipe for the cursor */ 417 temp |= (pipe << 28); 418 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; 419 420 if (gma_power_begin(dev, false)) { 421 REG_WRITE(control, temp); 422 REG_WRITE(base, addr); 423 gma_power_end(dev); 424 } 425 426 /* unpin the old bo */ 427 if (gma_crtc->cursor_obj) { 428 gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem); 429 psb_gtt_unpin(gt); 430 drm_gem_object_put_unlocked(gma_crtc->cursor_obj); 431 } 432 433 gma_crtc->cursor_obj = obj; 434 unlock: 435 return ret; 436 437 unref_cursor: 438 drm_gem_object_put_unlocked(obj); 439 return ret; 440 } 441 442 int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) 443 { 444 struct drm_device *dev = crtc->dev; 445 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 446 int pipe = gma_crtc->pipe; 447 uint32_t temp = 0; 448 uint32_t addr; 449 450 if (x < 0) { 451 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); 452 x = -x; 453 } 454 if (y < 0) { 455 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); 456 y = -y; 457 } 458 459 temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); 460 temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); 461 462 addr = gma_crtc->cursor_addr; 463 464 if (gma_power_begin(dev, false)) { 465 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); 466 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); 467 gma_power_end(dev); 468 } 469 return 0; 470 } 471 472 void gma_crtc_prepare(struct drm_crtc *crtc) 473 { 474 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 475 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 476 } 477 478 void gma_crtc_commit(struct drm_crtc *crtc) 479 { 480 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 481 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); 482 } 483 484 void gma_crtc_disable(struct drm_crtc *crtc) 485 { 486 struct gtt_range *gt; 487 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 488 489 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 490 491 if (crtc->primary->fb) { 492 gt = to_gtt_range(crtc->primary->fb->obj[0]); 493 psb_gtt_unpin(gt); 494 } 495 } 496 497 void gma_crtc_destroy(struct drm_crtc *crtc) 498 { 499 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 500 501 kfree(gma_crtc->crtc_state); 502 drm_crtc_cleanup(crtc); 503 kfree(gma_crtc); 504 } 505 506 int gma_crtc_page_flip(struct drm_crtc *crtc, 507 struct drm_framebuffer *fb, 508 struct drm_pending_vblank_event *event, 509 uint32_t page_flip_flags, 510 struct drm_modeset_acquire_ctx *ctx) 511 { 512 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 513 struct drm_framebuffer *current_fb = crtc->primary->fb; 514 struct drm_framebuffer *old_fb = crtc->primary->old_fb; 515 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 516 struct drm_device *dev = crtc->dev; 517 unsigned long flags; 518 int ret; 519 520 if (!crtc_funcs->mode_set_base) 521 return -EINVAL; 522 523 /* Using mode_set_base requires the new fb to be set already. */ 524 crtc->primary->fb = fb; 525 526 if (event) { 527 spin_lock_irqsave(&dev->event_lock, flags); 528 529 WARN_ON(drm_crtc_vblank_get(crtc) != 0); 530 531 gma_crtc->page_flip_event = event; 532 533 /* Call this locked if we want an event at vblank interrupt. */ 534 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); 535 if (ret) { 536 gma_crtc->page_flip_event = NULL; 537 drm_crtc_vblank_put(crtc); 538 } 539 540 spin_unlock_irqrestore(&dev->event_lock, flags); 541 } else { 542 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); 543 } 544 545 /* Restore previous fb in case of failure. */ 546 if (ret) 547 crtc->primary->fb = current_fb; 548 549 return ret; 550 } 551 552 int gma_crtc_set_config(struct drm_mode_set *set, 553 struct drm_modeset_acquire_ctx *ctx) 554 { 555 struct drm_device *dev = set->crtc->dev; 556 struct drm_psb_private *dev_priv = dev->dev_private; 557 int ret; 558 559 if (!dev_priv->rpm_enabled) 560 return drm_crtc_helper_set_config(set, ctx); 561 562 pm_runtime_forbid(&dev->pdev->dev); 563 ret = drm_crtc_helper_set_config(set, ctx); 564 pm_runtime_allow(&dev->pdev->dev); 565 566 return ret; 567 } 568 569 /** 570 * Save HW states of given crtc 571 */ 572 void gma_crtc_save(struct drm_crtc *crtc) 573 { 574 struct drm_device *dev = crtc->dev; 575 struct drm_psb_private *dev_priv = dev->dev_private; 576 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 577 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 578 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 579 uint32_t palette_reg; 580 int i; 581 582 if (!crtc_state) { 583 dev_err(dev->dev, "No CRTC state found\n"); 584 return; 585 } 586 587 crtc_state->saveDSPCNTR = REG_READ(map->cntr); 588 crtc_state->savePIPECONF = REG_READ(map->conf); 589 crtc_state->savePIPESRC = REG_READ(map->src); 590 crtc_state->saveFP0 = REG_READ(map->fp0); 591 crtc_state->saveFP1 = REG_READ(map->fp1); 592 crtc_state->saveDPLL = REG_READ(map->dpll); 593 crtc_state->saveHTOTAL = REG_READ(map->htotal); 594 crtc_state->saveHBLANK = REG_READ(map->hblank); 595 crtc_state->saveHSYNC = REG_READ(map->hsync); 596 crtc_state->saveVTOTAL = REG_READ(map->vtotal); 597 crtc_state->saveVBLANK = REG_READ(map->vblank); 598 crtc_state->saveVSYNC = REG_READ(map->vsync); 599 crtc_state->saveDSPSTRIDE = REG_READ(map->stride); 600 601 /* NOTE: DSPSIZE DSPPOS only for psb */ 602 crtc_state->saveDSPSIZE = REG_READ(map->size); 603 crtc_state->saveDSPPOS = REG_READ(map->pos); 604 605 crtc_state->saveDSPBASE = REG_READ(map->base); 606 607 palette_reg = map->palette; 608 for (i = 0; i < 256; ++i) 609 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2)); 610 } 611 612 /** 613 * Restore HW states of given crtc 614 */ 615 void gma_crtc_restore(struct drm_crtc *crtc) 616 { 617 struct drm_device *dev = crtc->dev; 618 struct drm_psb_private *dev_priv = dev->dev_private; 619 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 620 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; 621 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; 622 uint32_t palette_reg; 623 int i; 624 625 if (!crtc_state) { 626 dev_err(dev->dev, "No crtc state\n"); 627 return; 628 } 629 630 if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { 631 REG_WRITE(map->dpll, 632 crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); 633 REG_READ(map->dpll); 634 udelay(150); 635 } 636 637 REG_WRITE(map->fp0, crtc_state->saveFP0); 638 REG_READ(map->fp0); 639 640 REG_WRITE(map->fp1, crtc_state->saveFP1); 641 REG_READ(map->fp1); 642 643 REG_WRITE(map->dpll, crtc_state->saveDPLL); 644 REG_READ(map->dpll); 645 udelay(150); 646 647 REG_WRITE(map->htotal, crtc_state->saveHTOTAL); 648 REG_WRITE(map->hblank, crtc_state->saveHBLANK); 649 REG_WRITE(map->hsync, crtc_state->saveHSYNC); 650 REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); 651 REG_WRITE(map->vblank, crtc_state->saveVBLANK); 652 REG_WRITE(map->vsync, crtc_state->saveVSYNC); 653 REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); 654 655 REG_WRITE(map->size, crtc_state->saveDSPSIZE); 656 REG_WRITE(map->pos, crtc_state->saveDSPPOS); 657 658 REG_WRITE(map->src, crtc_state->savePIPESRC); 659 REG_WRITE(map->base, crtc_state->saveDSPBASE); 660 REG_WRITE(map->conf, crtc_state->savePIPECONF); 661 662 gma_wait_for_vblank(dev); 663 664 REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); 665 REG_WRITE(map->base, crtc_state->saveDSPBASE); 666 667 gma_wait_for_vblank(dev); 668 669 palette_reg = map->palette; 670 for (i = 0; i < 256; ++i) 671 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]); 672 } 673 674 void gma_encoder_prepare(struct drm_encoder *encoder) 675 { 676 const struct drm_encoder_helper_funcs *encoder_funcs = 677 encoder->helper_private; 678 /* lvds has its own version of prepare see psb_intel_lvds_prepare */ 679 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); 680 } 681 682 void gma_encoder_commit(struct drm_encoder *encoder) 683 { 684 const struct drm_encoder_helper_funcs *encoder_funcs = 685 encoder->helper_private; 686 /* lvds has its own version of commit see psb_intel_lvds_commit */ 687 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); 688 } 689 690 void gma_encoder_destroy(struct drm_encoder *encoder) 691 { 692 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 693 694 drm_encoder_cleanup(encoder); 695 kfree(intel_encoder); 696 } 697 698 /* Currently there is only a 1:1 mapping of encoders and connectors */ 699 struct drm_encoder *gma_best_encoder(struct drm_connector *connector) 700 { 701 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 702 703 return &gma_encoder->base; 704 } 705 706 void gma_connector_attach_encoder(struct gma_connector *connector, 707 struct gma_encoder *encoder) 708 { 709 connector->encoder = encoder; 710 drm_connector_attach_encoder(&connector->base, 711 &encoder->base); 712 } 713 714 #define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; } 715 716 bool gma_pll_is_valid(struct drm_crtc *crtc, 717 const struct gma_limit_t *limit, 718 struct gma_clock_t *clock) 719 { 720 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) 721 GMA_PLL_INVALID("p1 out of range"); 722 if (clock->p < limit->p.min || limit->p.max < clock->p) 723 GMA_PLL_INVALID("p out of range"); 724 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) 725 GMA_PLL_INVALID("m2 out of range"); 726 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) 727 GMA_PLL_INVALID("m1 out of range"); 728 /* On CDV m1 is always 0 */ 729 if (clock->m1 <= clock->m2 && clock->m1 != 0) 730 GMA_PLL_INVALID("m1 <= m2 && m1 != 0"); 731 if (clock->m < limit->m.min || limit->m.max < clock->m) 732 GMA_PLL_INVALID("m out of range"); 733 if (clock->n < limit->n.min || limit->n.max < clock->n) 734 GMA_PLL_INVALID("n out of range"); 735 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) 736 GMA_PLL_INVALID("vco out of range"); 737 /* XXX: We may need to be checking "Dot clock" 738 * depending on the multiplier, connector, etc., 739 * rather than just a single range. 740 */ 741 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) 742 GMA_PLL_INVALID("dot out of range"); 743 744 return true; 745 } 746 747 bool gma_find_best_pll(const struct gma_limit_t *limit, 748 struct drm_crtc *crtc, int target, int refclk, 749 struct gma_clock_t *best_clock) 750 { 751 struct drm_device *dev = crtc->dev; 752 const struct gma_clock_funcs *clock_funcs = 753 to_gma_crtc(crtc)->clock_funcs; 754 struct gma_clock_t clock; 755 int err = target; 756 757 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 758 (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { 759 /* 760 * For LVDS, if the panel is on, just rely on its current 761 * settings for dual-channel. We haven't figured out how to 762 * reliably set up different single/dual channel state, if we 763 * even can. 764 */ 765 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == 766 LVDS_CLKB_POWER_UP) 767 clock.p2 = limit->p2.p2_fast; 768 else 769 clock.p2 = limit->p2.p2_slow; 770 } else { 771 if (target < limit->p2.dot_limit) 772 clock.p2 = limit->p2.p2_slow; 773 else 774 clock.p2 = limit->p2.p2_fast; 775 } 776 777 memset(best_clock, 0, sizeof(*best_clock)); 778 779 /* m1 is always 0 on CDV so the outmost loop will run just once */ 780 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { 781 for (clock.m2 = limit->m2.min; 782 (clock.m2 < clock.m1 || clock.m1 == 0) && 783 clock.m2 <= limit->m2.max; clock.m2++) { 784 for (clock.n = limit->n.min; 785 clock.n <= limit->n.max; clock.n++) { 786 for (clock.p1 = limit->p1.min; 787 clock.p1 <= limit->p1.max; 788 clock.p1++) { 789 int this_err; 790 791 clock_funcs->clock(refclk, &clock); 792 793 if (!clock_funcs->pll_is_valid(crtc, 794 limit, &clock)) 795 continue; 796 797 this_err = abs(clock.dot - target); 798 if (this_err < err) { 799 *best_clock = clock; 800 err = this_err; 801 } 802 } 803 } 804 } 805 } 806 807 return err != target; 808 } 809