1 /* 2 * Copyright © 2012 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 21 * IN THE SOFTWARE. 22 * 23 * Authors: 24 * Keith Packard <keithp@keithp.com> 25 * 26 */ 27 28 #include <linux/i2c.h> 29 #include <linux/slab.h> 30 #include <linux/module.h> 31 #include <drm/drmP.h> 32 #include <drm/drm_crtc.h> 33 #include <drm/drm_crtc_helper.h> 34 #include "psb_drv.h" 35 #include "psb_intel_drv.h" 36 #include "psb_intel_reg.h" 37 #include "gma_display.h" 38 #include <drm/drm_dp_helper.h> 39 40 /** 41 * struct i2c_algo_dp_aux_data - driver interface structure for i2c over dp 42 * aux algorithm 43 * @running: set by the algo indicating whether an i2c is ongoing or whether 44 * the i2c bus is quiescent 45 * @address: i2c target address for the currently ongoing transfer 46 * @aux_ch: driver callback to transfer a single byte of the i2c payload 47 */ 48 struct i2c_algo_dp_aux_data { 49 bool running; 50 u16 address; 51 int (*aux_ch) (struct i2c_adapter *adapter, 52 int mode, uint8_t write_byte, 53 uint8_t *read_byte); 54 }; 55 56 /* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ 57 static int 58 i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, 59 uint8_t write_byte, uint8_t *read_byte) 60 { 61 struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; 62 int ret; 63 64 ret = (*algo_data->aux_ch)(adapter, mode, 65 write_byte, read_byte); 66 return ret; 67 } 68 69 /* 70 * I2C over AUX CH 71 */ 72 73 /* 74 * Send the address. If the I2C link is running, this 'restarts' 75 * the connection with the new address, this is used for doing 76 * a write followed by a read (as needed for DDC) 77 */ 78 static int 79 i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) 80 { 81 struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; 82 int mode = MODE_I2C_START; 83 int ret; 84 85 if (reading) 86 mode |= MODE_I2C_READ; 87 else 88 mode |= MODE_I2C_WRITE; 89 algo_data->address = address; 90 algo_data->running = true; 91 ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); 92 return ret; 93 } 94 95 /* 96 * Stop the I2C transaction. This closes out the link, sending 97 * a bare address packet with the MOT bit turned off 98 */ 99 static void 100 i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) 101 { 102 struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; 103 int mode = MODE_I2C_STOP; 104 105 if (reading) 106 mode |= MODE_I2C_READ; 107 else 108 mode |= MODE_I2C_WRITE; 109 if (algo_data->running) { 110 (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); 111 algo_data->running = false; 112 } 113 } 114 115 /* 116 * Write a single byte to the current I2C address, the 117 * the I2C link must be running or this returns -EIO 118 */ 119 static int 120 i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) 121 { 122 struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; 123 int ret; 124 125 if (!algo_data->running) 126 return -EIO; 127 128 ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); 129 return ret; 130 } 131 132 /* 133 * Read a single byte from the current I2C address, the 134 * I2C link must be running or this returns -EIO 135 */ 136 static int 137 i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) 138 { 139 struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; 140 int ret; 141 142 if (!algo_data->running) 143 return -EIO; 144 145 ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); 146 return ret; 147 } 148 149 static int 150 i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, 151 struct i2c_msg *msgs, 152 int num) 153 { 154 int ret = 0; 155 bool reading = false; 156 int m; 157 int b; 158 159 for (m = 0; m < num; m++) { 160 u16 len = msgs[m].len; 161 u8 *buf = msgs[m].buf; 162 reading = (msgs[m].flags & I2C_M_RD) != 0; 163 ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); 164 if (ret < 0) 165 break; 166 if (reading) { 167 for (b = 0; b < len; b++) { 168 ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); 169 if (ret < 0) 170 break; 171 } 172 } else { 173 for (b = 0; b < len; b++) { 174 ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); 175 if (ret < 0) 176 break; 177 } 178 } 179 if (ret < 0) 180 break; 181 } 182 if (ret >= 0) 183 ret = num; 184 i2c_algo_dp_aux_stop(adapter, reading); 185 DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret); 186 return ret; 187 } 188 189 static u32 190 i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) 191 { 192 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | 193 I2C_FUNC_SMBUS_READ_BLOCK_DATA | 194 I2C_FUNC_SMBUS_BLOCK_PROC_CALL | 195 I2C_FUNC_10BIT_ADDR; 196 } 197 198 static const struct i2c_algorithm i2c_dp_aux_algo = { 199 .master_xfer = i2c_algo_dp_aux_xfer, 200 .functionality = i2c_algo_dp_aux_functionality, 201 }; 202 203 static void 204 i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) 205 { 206 (void) i2c_algo_dp_aux_address(adapter, 0, false); 207 (void) i2c_algo_dp_aux_stop(adapter, false); 208 } 209 210 static int 211 i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) 212 { 213 adapter->algo = &i2c_dp_aux_algo; 214 adapter->retries = 3; 215 i2c_dp_aux_reset_bus(adapter); 216 return 0; 217 } 218 219 /* 220 * FIXME: This is the old dp aux helper, gma500 is the last driver that needs to 221 * be ported over to the new helper code in drm_dp_helper.c like i915 or radeon. 222 */ 223 static int __deprecated 224 i2c_dp_aux_add_bus(struct i2c_adapter *adapter) 225 { 226 int error; 227 228 error = i2c_dp_aux_prepare_bus(adapter); 229 if (error) 230 return error; 231 error = i2c_add_adapter(adapter); 232 return error; 233 } 234 235 #define _wait_for(COND, MS, W) ({ \ 236 unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ 237 int ret__ = 0; \ 238 while (! (COND)) { \ 239 if (time_after(jiffies, timeout__)) { \ 240 ret__ = -ETIMEDOUT; \ 241 break; \ 242 } \ 243 if (W && !in_dbg_master()) msleep(W); \ 244 } \ 245 ret__; \ 246 }) 247 248 #define wait_for(COND, MS) _wait_for(COND, MS, 1) 249 250 #define DP_LINK_CHECK_TIMEOUT (10 * 1000) 251 252 #define DP_LINK_CONFIGURATION_SIZE 9 253 254 #define CDV_FAST_LINK_TRAIN 1 255 256 struct cdv_intel_dp { 257 uint32_t output_reg; 258 uint32_t DP; 259 uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; 260 bool has_audio; 261 int force_audio; 262 uint32_t color_range; 263 uint8_t link_bw; 264 uint8_t lane_count; 265 uint8_t dpcd[4]; 266 struct gma_encoder *encoder; 267 struct i2c_adapter adapter; 268 struct i2c_algo_dp_aux_data algo; 269 uint8_t train_set[4]; 270 uint8_t link_status[DP_LINK_STATUS_SIZE]; 271 int panel_power_up_delay; 272 int panel_power_down_delay; 273 int panel_power_cycle_delay; 274 int backlight_on_delay; 275 int backlight_off_delay; 276 struct drm_display_mode *panel_fixed_mode; /* for eDP */ 277 bool panel_on; 278 }; 279 280 struct ddi_regoff { 281 uint32_t PreEmph1; 282 uint32_t PreEmph2; 283 uint32_t VSwing1; 284 uint32_t VSwing2; 285 uint32_t VSwing3; 286 uint32_t VSwing4; 287 uint32_t VSwing5; 288 }; 289 290 static struct ddi_regoff ddi_DP_train_table[] = { 291 {.PreEmph1 = 0x812c, .PreEmph2 = 0x8124, .VSwing1 = 0x8154, 292 .VSwing2 = 0x8148, .VSwing3 = 0x814C, .VSwing4 = 0x8150, 293 .VSwing5 = 0x8158,}, 294 {.PreEmph1 = 0x822c, .PreEmph2 = 0x8224, .VSwing1 = 0x8254, 295 .VSwing2 = 0x8248, .VSwing3 = 0x824C, .VSwing4 = 0x8250, 296 .VSwing5 = 0x8258,}, 297 }; 298 299 static uint32_t dp_vswing_premph_table[] = { 300 0x55338954, 0x4000, 301 0x554d8954, 0x2000, 302 0x55668954, 0, 303 0x559ac0d4, 0x6000, 304 }; 305 /** 306 * is_edp - is the given port attached to an eDP panel (either CPU or PCH) 307 * @intel_dp: DP struct 308 * 309 * If a CPU or PCH DP output is attached to an eDP panel, this function 310 * will return true, and false otherwise. 311 */ 312 static bool is_edp(struct gma_encoder *encoder) 313 { 314 return encoder->type == INTEL_OUTPUT_EDP; 315 } 316 317 318 static void cdv_intel_dp_start_link_train(struct gma_encoder *encoder); 319 static void cdv_intel_dp_complete_link_train(struct gma_encoder *encoder); 320 static void cdv_intel_dp_link_down(struct gma_encoder *encoder); 321 322 static int 323 cdv_intel_dp_max_lane_count(struct gma_encoder *encoder) 324 { 325 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 326 int max_lane_count = 4; 327 328 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { 329 max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; 330 switch (max_lane_count) { 331 case 1: case 2: case 4: 332 break; 333 default: 334 max_lane_count = 4; 335 } 336 } 337 return max_lane_count; 338 } 339 340 static int 341 cdv_intel_dp_max_link_bw(struct gma_encoder *encoder) 342 { 343 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 344 int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; 345 346 switch (max_link_bw) { 347 case DP_LINK_BW_1_62: 348 case DP_LINK_BW_2_7: 349 break; 350 default: 351 max_link_bw = DP_LINK_BW_1_62; 352 break; 353 } 354 return max_link_bw; 355 } 356 357 static int 358 cdv_intel_dp_link_clock(uint8_t link_bw) 359 { 360 if (link_bw == DP_LINK_BW_2_7) 361 return 270000; 362 else 363 return 162000; 364 } 365 366 static int 367 cdv_intel_dp_link_required(int pixel_clock, int bpp) 368 { 369 return (pixel_clock * bpp + 7) / 8; 370 } 371 372 static int 373 cdv_intel_dp_max_data_rate(int max_link_clock, int max_lanes) 374 { 375 return (max_link_clock * max_lanes * 19) / 20; 376 } 377 378 static void cdv_intel_edp_panel_vdd_on(struct gma_encoder *intel_encoder) 379 { 380 struct drm_device *dev = intel_encoder->base.dev; 381 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 382 u32 pp; 383 384 if (intel_dp->panel_on) { 385 DRM_DEBUG_KMS("Skip VDD on because of panel on\n"); 386 return; 387 } 388 DRM_DEBUG_KMS("\n"); 389 390 pp = REG_READ(PP_CONTROL); 391 392 pp |= EDP_FORCE_VDD; 393 REG_WRITE(PP_CONTROL, pp); 394 REG_READ(PP_CONTROL); 395 msleep(intel_dp->panel_power_up_delay); 396 } 397 398 static void cdv_intel_edp_panel_vdd_off(struct gma_encoder *intel_encoder) 399 { 400 struct drm_device *dev = intel_encoder->base.dev; 401 u32 pp; 402 403 DRM_DEBUG_KMS("\n"); 404 pp = REG_READ(PP_CONTROL); 405 406 pp &= ~EDP_FORCE_VDD; 407 REG_WRITE(PP_CONTROL, pp); 408 REG_READ(PP_CONTROL); 409 410 } 411 412 /* Returns true if the panel was already on when called */ 413 static bool cdv_intel_edp_panel_on(struct gma_encoder *intel_encoder) 414 { 415 struct drm_device *dev = intel_encoder->base.dev; 416 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 417 u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_NONE; 418 419 if (intel_dp->panel_on) 420 return true; 421 422 DRM_DEBUG_KMS("\n"); 423 pp = REG_READ(PP_CONTROL); 424 pp &= ~PANEL_UNLOCK_MASK; 425 426 pp |= (PANEL_UNLOCK_REGS | POWER_TARGET_ON); 427 REG_WRITE(PP_CONTROL, pp); 428 REG_READ(PP_CONTROL); 429 430 if (wait_for(((REG_READ(PP_STATUS) & idle_on_mask) == idle_on_mask), 1000)) { 431 DRM_DEBUG_KMS("Error in Powering up eDP panel, status %x\n", REG_READ(PP_STATUS)); 432 intel_dp->panel_on = false; 433 } else 434 intel_dp->panel_on = true; 435 msleep(intel_dp->panel_power_up_delay); 436 437 return false; 438 } 439 440 static void cdv_intel_edp_panel_off (struct gma_encoder *intel_encoder) 441 { 442 struct drm_device *dev = intel_encoder->base.dev; 443 u32 pp, idle_off_mask = PP_ON ; 444 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 445 446 DRM_DEBUG_KMS("\n"); 447 448 pp = REG_READ(PP_CONTROL); 449 450 if ((pp & POWER_TARGET_ON) == 0) 451 return; 452 453 intel_dp->panel_on = false; 454 pp &= ~PANEL_UNLOCK_MASK; 455 /* ILK workaround: disable reset around power sequence */ 456 457 pp &= ~POWER_TARGET_ON; 458 pp &= ~EDP_FORCE_VDD; 459 pp &= ~EDP_BLC_ENABLE; 460 REG_WRITE(PP_CONTROL, pp); 461 REG_READ(PP_CONTROL); 462 DRM_DEBUG_KMS("PP_STATUS %x\n", REG_READ(PP_STATUS)); 463 464 if (wait_for((REG_READ(PP_STATUS) & idle_off_mask) == 0, 1000)) { 465 DRM_DEBUG_KMS("Error in turning off Panel\n"); 466 } 467 468 msleep(intel_dp->panel_power_cycle_delay); 469 DRM_DEBUG_KMS("Over\n"); 470 } 471 472 static void cdv_intel_edp_backlight_on (struct gma_encoder *intel_encoder) 473 { 474 struct drm_device *dev = intel_encoder->base.dev; 475 u32 pp; 476 477 DRM_DEBUG_KMS("\n"); 478 /* 479 * If we enable the backlight right away following a panel power 480 * on, we may see slight flicker as the panel syncs with the eDP 481 * link. So delay a bit to make sure the image is solid before 482 * allowing it to appear. 483 */ 484 msleep(300); 485 pp = REG_READ(PP_CONTROL); 486 487 pp |= EDP_BLC_ENABLE; 488 REG_WRITE(PP_CONTROL, pp); 489 gma_backlight_enable(dev); 490 } 491 492 static void cdv_intel_edp_backlight_off (struct gma_encoder *intel_encoder) 493 { 494 struct drm_device *dev = intel_encoder->base.dev; 495 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 496 u32 pp; 497 498 DRM_DEBUG_KMS("\n"); 499 gma_backlight_disable(dev); 500 msleep(10); 501 pp = REG_READ(PP_CONTROL); 502 503 pp &= ~EDP_BLC_ENABLE; 504 REG_WRITE(PP_CONTROL, pp); 505 msleep(intel_dp->backlight_off_delay); 506 } 507 508 static int 509 cdv_intel_dp_mode_valid(struct drm_connector *connector, 510 struct drm_display_mode *mode) 511 { 512 struct gma_encoder *encoder = gma_attached_encoder(connector); 513 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 514 int max_link_clock = cdv_intel_dp_link_clock(cdv_intel_dp_max_link_bw(encoder)); 515 int max_lanes = cdv_intel_dp_max_lane_count(encoder); 516 struct drm_psb_private *dev_priv = connector->dev->dev_private; 517 518 if (is_edp(encoder) && intel_dp->panel_fixed_mode) { 519 if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) 520 return MODE_PANEL; 521 if (mode->vdisplay > intel_dp->panel_fixed_mode->vdisplay) 522 return MODE_PANEL; 523 } 524 525 /* only refuse the mode on non eDP since we have seen some weird eDP panels 526 which are outside spec tolerances but somehow work by magic */ 527 if (!is_edp(encoder) && 528 (cdv_intel_dp_link_required(mode->clock, dev_priv->edp.bpp) 529 > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes))) 530 return MODE_CLOCK_HIGH; 531 532 if (is_edp(encoder)) { 533 if (cdv_intel_dp_link_required(mode->clock, 24) 534 > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes)) 535 return MODE_CLOCK_HIGH; 536 537 } 538 if (mode->clock < 10000) 539 return MODE_CLOCK_LOW; 540 541 return MODE_OK; 542 } 543 544 static uint32_t 545 pack_aux(uint8_t *src, int src_bytes) 546 { 547 int i; 548 uint32_t v = 0; 549 550 if (src_bytes > 4) 551 src_bytes = 4; 552 for (i = 0; i < src_bytes; i++) 553 v |= ((uint32_t) src[i]) << ((3-i) * 8); 554 return v; 555 } 556 557 static void 558 unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) 559 { 560 int i; 561 if (dst_bytes > 4) 562 dst_bytes = 4; 563 for (i = 0; i < dst_bytes; i++) 564 dst[i] = src >> ((3-i) * 8); 565 } 566 567 static int 568 cdv_intel_dp_aux_ch(struct gma_encoder *encoder, 569 uint8_t *send, int send_bytes, 570 uint8_t *recv, int recv_size) 571 { 572 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 573 uint32_t output_reg = intel_dp->output_reg; 574 struct drm_device *dev = encoder->base.dev; 575 uint32_t ch_ctl = output_reg + 0x10; 576 uint32_t ch_data = ch_ctl + 4; 577 int i; 578 int recv_bytes; 579 uint32_t status; 580 uint32_t aux_clock_divider; 581 int try, precharge; 582 583 /* The clock divider is based off the hrawclk, 584 * and would like to run at 2MHz. So, take the 585 * hrawclk value and divide by 2 and use that 586 * On CDV platform it uses 200MHz as hrawclk. 587 * 588 */ 589 aux_clock_divider = 200 / 2; 590 591 precharge = 4; 592 if (is_edp(encoder)) 593 precharge = 10; 594 595 if (REG_READ(ch_ctl) & DP_AUX_CH_CTL_SEND_BUSY) { 596 DRM_ERROR("dp_aux_ch not started status 0x%08x\n", 597 REG_READ(ch_ctl)); 598 return -EBUSY; 599 } 600 601 /* Must try at least 3 times according to DP spec */ 602 for (try = 0; try < 5; try++) { 603 /* Load the send data into the aux channel data registers */ 604 for (i = 0; i < send_bytes; i += 4) 605 REG_WRITE(ch_data + i, 606 pack_aux(send + i, send_bytes - i)); 607 608 /* Send the command and wait for it to complete */ 609 REG_WRITE(ch_ctl, 610 DP_AUX_CH_CTL_SEND_BUSY | 611 DP_AUX_CH_CTL_TIME_OUT_400us | 612 (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | 613 (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | 614 (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | 615 DP_AUX_CH_CTL_DONE | 616 DP_AUX_CH_CTL_TIME_OUT_ERROR | 617 DP_AUX_CH_CTL_RECEIVE_ERROR); 618 for (;;) { 619 status = REG_READ(ch_ctl); 620 if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) 621 break; 622 udelay(100); 623 } 624 625 /* Clear done status and any errors */ 626 REG_WRITE(ch_ctl, 627 status | 628 DP_AUX_CH_CTL_DONE | 629 DP_AUX_CH_CTL_TIME_OUT_ERROR | 630 DP_AUX_CH_CTL_RECEIVE_ERROR); 631 if (status & DP_AUX_CH_CTL_DONE) 632 break; 633 } 634 635 if ((status & DP_AUX_CH_CTL_DONE) == 0) { 636 DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); 637 return -EBUSY; 638 } 639 640 /* Check for timeout or receive error. 641 * Timeouts occur when the sink is not connected 642 */ 643 if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { 644 DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); 645 return -EIO; 646 } 647 648 /* Timeouts occur when the device isn't connected, so they're 649 * "normal" -- don't fill the kernel log with these */ 650 if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { 651 DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status); 652 return -ETIMEDOUT; 653 } 654 655 /* Unload any bytes sent back from the other side */ 656 recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> 657 DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); 658 if (recv_bytes > recv_size) 659 recv_bytes = recv_size; 660 661 for (i = 0; i < recv_bytes; i += 4) 662 unpack_aux(REG_READ(ch_data + i), 663 recv + i, recv_bytes - i); 664 665 return recv_bytes; 666 } 667 668 /* Write data to the aux channel in native mode */ 669 static int 670 cdv_intel_dp_aux_native_write(struct gma_encoder *encoder, 671 uint16_t address, uint8_t *send, int send_bytes) 672 { 673 int ret; 674 uint8_t msg[20]; 675 int msg_bytes; 676 uint8_t ack; 677 678 if (send_bytes > 16) 679 return -1; 680 msg[0] = DP_AUX_NATIVE_WRITE << 4; 681 msg[1] = address >> 8; 682 msg[2] = address & 0xff; 683 msg[3] = send_bytes - 1; 684 memcpy(&msg[4], send, send_bytes); 685 msg_bytes = send_bytes + 4; 686 for (;;) { 687 ret = cdv_intel_dp_aux_ch(encoder, msg, msg_bytes, &ack, 1); 688 if (ret < 0) 689 return ret; 690 ack >>= 4; 691 if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_ACK) 692 break; 693 else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER) 694 udelay(100); 695 else 696 return -EIO; 697 } 698 return send_bytes; 699 } 700 701 /* Write a single byte to the aux channel in native mode */ 702 static int 703 cdv_intel_dp_aux_native_write_1(struct gma_encoder *encoder, 704 uint16_t address, uint8_t byte) 705 { 706 return cdv_intel_dp_aux_native_write(encoder, address, &byte, 1); 707 } 708 709 /* read bytes from a native aux channel */ 710 static int 711 cdv_intel_dp_aux_native_read(struct gma_encoder *encoder, 712 uint16_t address, uint8_t *recv, int recv_bytes) 713 { 714 uint8_t msg[4]; 715 int msg_bytes; 716 uint8_t reply[20]; 717 int reply_bytes; 718 uint8_t ack; 719 int ret; 720 721 msg[0] = DP_AUX_NATIVE_READ << 4; 722 msg[1] = address >> 8; 723 msg[2] = address & 0xff; 724 msg[3] = recv_bytes - 1; 725 726 msg_bytes = 4; 727 reply_bytes = recv_bytes + 1; 728 729 for (;;) { 730 ret = cdv_intel_dp_aux_ch(encoder, msg, msg_bytes, 731 reply, reply_bytes); 732 if (ret == 0) 733 return -EPROTO; 734 if (ret < 0) 735 return ret; 736 ack = reply[0] >> 4; 737 if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_ACK) { 738 memcpy(recv, reply + 1, ret - 1); 739 return ret - 1; 740 } 741 else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER) 742 udelay(100); 743 else 744 return -EIO; 745 } 746 } 747 748 static int 749 cdv_intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, 750 uint8_t write_byte, uint8_t *read_byte) 751 { 752 struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; 753 struct cdv_intel_dp *intel_dp = container_of(adapter, 754 struct cdv_intel_dp, 755 adapter); 756 struct gma_encoder *encoder = intel_dp->encoder; 757 uint16_t address = algo_data->address; 758 uint8_t msg[5]; 759 uint8_t reply[2]; 760 unsigned retry; 761 int msg_bytes; 762 int reply_bytes; 763 int ret; 764 765 /* Set up the command byte */ 766 if (mode & MODE_I2C_READ) 767 msg[0] = DP_AUX_I2C_READ << 4; 768 else 769 msg[0] = DP_AUX_I2C_WRITE << 4; 770 771 if (!(mode & MODE_I2C_STOP)) 772 msg[0] |= DP_AUX_I2C_MOT << 4; 773 774 msg[1] = address >> 8; 775 msg[2] = address; 776 777 switch (mode) { 778 case MODE_I2C_WRITE: 779 msg[3] = 0; 780 msg[4] = write_byte; 781 msg_bytes = 5; 782 reply_bytes = 1; 783 break; 784 case MODE_I2C_READ: 785 msg[3] = 0; 786 msg_bytes = 4; 787 reply_bytes = 2; 788 break; 789 default: 790 msg_bytes = 3; 791 reply_bytes = 1; 792 break; 793 } 794 795 for (retry = 0; retry < 5; retry++) { 796 ret = cdv_intel_dp_aux_ch(encoder, 797 msg, msg_bytes, 798 reply, reply_bytes); 799 if (ret < 0) { 800 DRM_DEBUG_KMS("aux_ch failed %d\n", ret); 801 return ret; 802 } 803 804 switch ((reply[0] >> 4) & DP_AUX_NATIVE_REPLY_MASK) { 805 case DP_AUX_NATIVE_REPLY_ACK: 806 /* I2C-over-AUX Reply field is only valid 807 * when paired with AUX ACK. 808 */ 809 break; 810 case DP_AUX_NATIVE_REPLY_NACK: 811 DRM_DEBUG_KMS("aux_ch native nack\n"); 812 return -EREMOTEIO; 813 case DP_AUX_NATIVE_REPLY_DEFER: 814 udelay(100); 815 continue; 816 default: 817 DRM_ERROR("aux_ch invalid native reply 0x%02x\n", 818 reply[0]); 819 return -EREMOTEIO; 820 } 821 822 switch ((reply[0] >> 4) & DP_AUX_I2C_REPLY_MASK) { 823 case DP_AUX_I2C_REPLY_ACK: 824 if (mode == MODE_I2C_READ) { 825 *read_byte = reply[1]; 826 } 827 return reply_bytes - 1; 828 case DP_AUX_I2C_REPLY_NACK: 829 DRM_DEBUG_KMS("aux_i2c nack\n"); 830 return -EREMOTEIO; 831 case DP_AUX_I2C_REPLY_DEFER: 832 DRM_DEBUG_KMS("aux_i2c defer\n"); 833 udelay(100); 834 break; 835 default: 836 DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]); 837 return -EREMOTEIO; 838 } 839 } 840 841 DRM_ERROR("too many retries, giving up\n"); 842 return -EREMOTEIO; 843 } 844 845 static int 846 cdv_intel_dp_i2c_init(struct gma_connector *connector, 847 struct gma_encoder *encoder, const char *name) 848 { 849 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 850 int ret; 851 852 DRM_DEBUG_KMS("i2c_init %s\n", name); 853 854 intel_dp->algo.running = false; 855 intel_dp->algo.address = 0; 856 intel_dp->algo.aux_ch = cdv_intel_dp_i2c_aux_ch; 857 858 memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter)); 859 intel_dp->adapter.owner = THIS_MODULE; 860 intel_dp->adapter.class = I2C_CLASS_DDC; 861 strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1); 862 intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0'; 863 intel_dp->adapter.algo_data = &intel_dp->algo; 864 intel_dp->adapter.dev.parent = connector->base.kdev; 865 866 if (is_edp(encoder)) 867 cdv_intel_edp_panel_vdd_on(encoder); 868 ret = i2c_dp_aux_add_bus(&intel_dp->adapter); 869 if (is_edp(encoder)) 870 cdv_intel_edp_panel_vdd_off(encoder); 871 872 return ret; 873 } 874 875 static void cdv_intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, 876 struct drm_display_mode *adjusted_mode) 877 { 878 adjusted_mode->hdisplay = fixed_mode->hdisplay; 879 adjusted_mode->hsync_start = fixed_mode->hsync_start; 880 adjusted_mode->hsync_end = fixed_mode->hsync_end; 881 adjusted_mode->htotal = fixed_mode->htotal; 882 883 adjusted_mode->vdisplay = fixed_mode->vdisplay; 884 adjusted_mode->vsync_start = fixed_mode->vsync_start; 885 adjusted_mode->vsync_end = fixed_mode->vsync_end; 886 adjusted_mode->vtotal = fixed_mode->vtotal; 887 888 adjusted_mode->clock = fixed_mode->clock; 889 890 drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); 891 } 892 893 static bool 894 cdv_intel_dp_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, 895 struct drm_display_mode *adjusted_mode) 896 { 897 struct drm_psb_private *dev_priv = encoder->dev->dev_private; 898 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 899 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 900 int lane_count, clock; 901 int max_lane_count = cdv_intel_dp_max_lane_count(intel_encoder); 902 int max_clock = cdv_intel_dp_max_link_bw(intel_encoder) == DP_LINK_BW_2_7 ? 1 : 0; 903 static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; 904 int refclock = mode->clock; 905 int bpp = 24; 906 907 if (is_edp(intel_encoder) && intel_dp->panel_fixed_mode) { 908 cdv_intel_fixed_panel_mode(intel_dp->panel_fixed_mode, adjusted_mode); 909 refclock = intel_dp->panel_fixed_mode->clock; 910 bpp = dev_priv->edp.bpp; 911 } 912 913 for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { 914 for (clock = max_clock; clock >= 0; clock--) { 915 int link_avail = cdv_intel_dp_max_data_rate(cdv_intel_dp_link_clock(bws[clock]), lane_count); 916 917 if (cdv_intel_dp_link_required(refclock, bpp) <= link_avail) { 918 intel_dp->link_bw = bws[clock]; 919 intel_dp->lane_count = lane_count; 920 adjusted_mode->clock = cdv_intel_dp_link_clock(intel_dp->link_bw); 921 DRM_DEBUG_KMS("Display port link bw %02x lane " 922 "count %d clock %d\n", 923 intel_dp->link_bw, intel_dp->lane_count, 924 adjusted_mode->clock); 925 return true; 926 } 927 } 928 } 929 if (is_edp(intel_encoder)) { 930 /* okay we failed just pick the highest */ 931 intel_dp->lane_count = max_lane_count; 932 intel_dp->link_bw = bws[max_clock]; 933 adjusted_mode->clock = cdv_intel_dp_link_clock(intel_dp->link_bw); 934 DRM_DEBUG_KMS("Force picking display port link bw %02x lane " 935 "count %d clock %d\n", 936 intel_dp->link_bw, intel_dp->lane_count, 937 adjusted_mode->clock); 938 939 return true; 940 } 941 return false; 942 } 943 944 struct cdv_intel_dp_m_n { 945 uint32_t tu; 946 uint32_t gmch_m; 947 uint32_t gmch_n; 948 uint32_t link_m; 949 uint32_t link_n; 950 }; 951 952 static void 953 cdv_intel_reduce_ratio(uint32_t *num, uint32_t *den) 954 { 955 /* 956 while (*num > 0xffffff || *den > 0xffffff) { 957 *num >>= 1; 958 *den >>= 1; 959 }*/ 960 uint64_t value, m; 961 m = *num; 962 value = m * (0x800000); 963 m = do_div(value, *den); 964 *num = value; 965 *den = 0x800000; 966 } 967 968 static void 969 cdv_intel_dp_compute_m_n(int bpp, 970 int nlanes, 971 int pixel_clock, 972 int link_clock, 973 struct cdv_intel_dp_m_n *m_n) 974 { 975 m_n->tu = 64; 976 m_n->gmch_m = (pixel_clock * bpp + 7) >> 3; 977 m_n->gmch_n = link_clock * nlanes; 978 cdv_intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); 979 m_n->link_m = pixel_clock; 980 m_n->link_n = link_clock; 981 cdv_intel_reduce_ratio(&m_n->link_m, &m_n->link_n); 982 } 983 984 void 985 cdv_intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, 986 struct drm_display_mode *adjusted_mode) 987 { 988 struct drm_device *dev = crtc->dev; 989 struct drm_psb_private *dev_priv = dev->dev_private; 990 struct drm_mode_config *mode_config = &dev->mode_config; 991 struct drm_encoder *encoder; 992 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 993 int lane_count = 4, bpp = 24; 994 struct cdv_intel_dp_m_n m_n; 995 int pipe = gma_crtc->pipe; 996 997 /* 998 * Find the lane count in the intel_encoder private 999 */ 1000 list_for_each_entry(encoder, &mode_config->encoder_list, head) { 1001 struct gma_encoder *intel_encoder; 1002 struct cdv_intel_dp *intel_dp; 1003 1004 if (encoder->crtc != crtc) 1005 continue; 1006 1007 intel_encoder = to_gma_encoder(encoder); 1008 intel_dp = intel_encoder->dev_priv; 1009 if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) { 1010 lane_count = intel_dp->lane_count; 1011 break; 1012 } else if (is_edp(intel_encoder)) { 1013 lane_count = intel_dp->lane_count; 1014 bpp = dev_priv->edp.bpp; 1015 break; 1016 } 1017 } 1018 1019 /* 1020 * Compute the GMCH and Link ratios. The '3' here is 1021 * the number of bytes_per_pixel post-LUT, which we always 1022 * set up for 8-bits of R/G/B, or 3 bytes total. 1023 */ 1024 cdv_intel_dp_compute_m_n(bpp, lane_count, 1025 mode->clock, adjusted_mode->clock, &m_n); 1026 1027 { 1028 REG_WRITE(PIPE_GMCH_DATA_M(pipe), 1029 ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | 1030 m_n.gmch_m); 1031 REG_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n); 1032 REG_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m); 1033 REG_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n); 1034 } 1035 } 1036 1037 static void 1038 cdv_intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, 1039 struct drm_display_mode *adjusted_mode) 1040 { 1041 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 1042 struct drm_crtc *crtc = encoder->crtc; 1043 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 1044 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 1045 struct drm_device *dev = encoder->dev; 1046 1047 intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; 1048 intel_dp->DP |= intel_dp->color_range; 1049 1050 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) 1051 intel_dp->DP |= DP_SYNC_HS_HIGH; 1052 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) 1053 intel_dp->DP |= DP_SYNC_VS_HIGH; 1054 1055 intel_dp->DP |= DP_LINK_TRAIN_OFF; 1056 1057 switch (intel_dp->lane_count) { 1058 case 1: 1059 intel_dp->DP |= DP_PORT_WIDTH_1; 1060 break; 1061 case 2: 1062 intel_dp->DP |= DP_PORT_WIDTH_2; 1063 break; 1064 case 4: 1065 intel_dp->DP |= DP_PORT_WIDTH_4; 1066 break; 1067 } 1068 if (intel_dp->has_audio) 1069 intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; 1070 1071 memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); 1072 intel_dp->link_configuration[0] = intel_dp->link_bw; 1073 intel_dp->link_configuration[1] = intel_dp->lane_count; 1074 1075 /* 1076 * Check for DPCD version > 1.1 and enhanced framing support 1077 */ 1078 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && 1079 (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { 1080 intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; 1081 intel_dp->DP |= DP_ENHANCED_FRAMING; 1082 } 1083 1084 /* CPT DP's pipe select is decided in TRANS_DP_CTL */ 1085 if (gma_crtc->pipe == 1) 1086 intel_dp->DP |= DP_PIPEB_SELECT; 1087 1088 REG_WRITE(intel_dp->output_reg, (intel_dp->DP | DP_PORT_EN)); 1089 DRM_DEBUG_KMS("DP expected reg is %x\n", intel_dp->DP); 1090 if (is_edp(intel_encoder)) { 1091 uint32_t pfit_control; 1092 cdv_intel_edp_panel_on(intel_encoder); 1093 1094 if (mode->hdisplay != adjusted_mode->hdisplay || 1095 mode->vdisplay != adjusted_mode->vdisplay) 1096 pfit_control = PFIT_ENABLE; 1097 else 1098 pfit_control = 0; 1099 1100 pfit_control |= gma_crtc->pipe << PFIT_PIPE_SHIFT; 1101 1102 REG_WRITE(PFIT_CONTROL, pfit_control); 1103 } 1104 } 1105 1106 1107 /* If the sink supports it, try to set the power state appropriately */ 1108 static void cdv_intel_dp_sink_dpms(struct gma_encoder *encoder, int mode) 1109 { 1110 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1111 int ret, i; 1112 1113 /* Should have a valid DPCD by this point */ 1114 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) 1115 return; 1116 1117 if (mode != DRM_MODE_DPMS_ON) { 1118 ret = cdv_intel_dp_aux_native_write_1(encoder, DP_SET_POWER, 1119 DP_SET_POWER_D3); 1120 if (ret != 1) 1121 DRM_DEBUG_DRIVER("failed to write sink power state\n"); 1122 } else { 1123 /* 1124 * When turning on, we need to retry for 1ms to give the sink 1125 * time to wake up. 1126 */ 1127 for (i = 0; i < 3; i++) { 1128 ret = cdv_intel_dp_aux_native_write_1(encoder, 1129 DP_SET_POWER, 1130 DP_SET_POWER_D0); 1131 if (ret == 1) 1132 break; 1133 udelay(1000); 1134 } 1135 } 1136 } 1137 1138 static void cdv_intel_dp_prepare(struct drm_encoder *encoder) 1139 { 1140 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 1141 int edp = is_edp(intel_encoder); 1142 1143 if (edp) { 1144 cdv_intel_edp_backlight_off(intel_encoder); 1145 cdv_intel_edp_panel_off(intel_encoder); 1146 cdv_intel_edp_panel_vdd_on(intel_encoder); 1147 } 1148 /* Wake up the sink first */ 1149 cdv_intel_dp_sink_dpms(intel_encoder, DRM_MODE_DPMS_ON); 1150 cdv_intel_dp_link_down(intel_encoder); 1151 if (edp) 1152 cdv_intel_edp_panel_vdd_off(intel_encoder); 1153 } 1154 1155 static void cdv_intel_dp_commit(struct drm_encoder *encoder) 1156 { 1157 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 1158 int edp = is_edp(intel_encoder); 1159 1160 if (edp) 1161 cdv_intel_edp_panel_on(intel_encoder); 1162 cdv_intel_dp_start_link_train(intel_encoder); 1163 cdv_intel_dp_complete_link_train(intel_encoder); 1164 if (edp) 1165 cdv_intel_edp_backlight_on(intel_encoder); 1166 } 1167 1168 static void 1169 cdv_intel_dp_dpms(struct drm_encoder *encoder, int mode) 1170 { 1171 struct gma_encoder *intel_encoder = to_gma_encoder(encoder); 1172 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 1173 struct drm_device *dev = encoder->dev; 1174 uint32_t dp_reg = REG_READ(intel_dp->output_reg); 1175 int edp = is_edp(intel_encoder); 1176 1177 if (mode != DRM_MODE_DPMS_ON) { 1178 if (edp) { 1179 cdv_intel_edp_backlight_off(intel_encoder); 1180 cdv_intel_edp_panel_vdd_on(intel_encoder); 1181 } 1182 cdv_intel_dp_sink_dpms(intel_encoder, mode); 1183 cdv_intel_dp_link_down(intel_encoder); 1184 if (edp) { 1185 cdv_intel_edp_panel_vdd_off(intel_encoder); 1186 cdv_intel_edp_panel_off(intel_encoder); 1187 } 1188 } else { 1189 if (edp) 1190 cdv_intel_edp_panel_on(intel_encoder); 1191 cdv_intel_dp_sink_dpms(intel_encoder, mode); 1192 if (!(dp_reg & DP_PORT_EN)) { 1193 cdv_intel_dp_start_link_train(intel_encoder); 1194 cdv_intel_dp_complete_link_train(intel_encoder); 1195 } 1196 if (edp) 1197 cdv_intel_edp_backlight_on(intel_encoder); 1198 } 1199 } 1200 1201 /* 1202 * Native read with retry for link status and receiver capability reads for 1203 * cases where the sink may still be asleep. 1204 */ 1205 static bool 1206 cdv_intel_dp_aux_native_read_retry(struct gma_encoder *encoder, uint16_t address, 1207 uint8_t *recv, int recv_bytes) 1208 { 1209 int ret, i; 1210 1211 /* 1212 * Sinks are *supposed* to come up within 1ms from an off state, 1213 * but we're also supposed to retry 3 times per the spec. 1214 */ 1215 for (i = 0; i < 3; i++) { 1216 ret = cdv_intel_dp_aux_native_read(encoder, address, recv, 1217 recv_bytes); 1218 if (ret == recv_bytes) 1219 return true; 1220 udelay(1000); 1221 } 1222 1223 return false; 1224 } 1225 1226 /* 1227 * Fetch AUX CH registers 0x202 - 0x207 which contain 1228 * link status information 1229 */ 1230 static bool 1231 cdv_intel_dp_get_link_status(struct gma_encoder *encoder) 1232 { 1233 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1234 return cdv_intel_dp_aux_native_read_retry(encoder, 1235 DP_LANE0_1_STATUS, 1236 intel_dp->link_status, 1237 DP_LINK_STATUS_SIZE); 1238 } 1239 1240 static uint8_t 1241 cdv_intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], 1242 int r) 1243 { 1244 return link_status[r - DP_LANE0_1_STATUS]; 1245 } 1246 1247 static uint8_t 1248 cdv_intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], 1249 int lane) 1250 { 1251 int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); 1252 int s = ((lane & 1) ? 1253 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : 1254 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); 1255 uint8_t l = cdv_intel_dp_link_status(link_status, i); 1256 1257 return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; 1258 } 1259 1260 static uint8_t 1261 cdv_intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], 1262 int lane) 1263 { 1264 int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); 1265 int s = ((lane & 1) ? 1266 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : 1267 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); 1268 uint8_t l = cdv_intel_dp_link_status(link_status, i); 1269 1270 return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; 1271 } 1272 1273 1274 #if 0 1275 static char *voltage_names[] = { 1276 "0.4V", "0.6V", "0.8V", "1.2V" 1277 }; 1278 static char *pre_emph_names[] = { 1279 "0dB", "3.5dB", "6dB", "9.5dB" 1280 }; 1281 static char *link_train_names[] = { 1282 "pattern 1", "pattern 2", "idle", "off" 1283 }; 1284 #endif 1285 1286 #define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_LEVEL_3 1287 /* 1288 static uint8_t 1289 cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing) 1290 { 1291 switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { 1292 case DP_TRAIN_VOLTAGE_SWING_400: 1293 return DP_TRAIN_PRE_EMPHASIS_6; 1294 case DP_TRAIN_VOLTAGE_SWING_600: 1295 return DP_TRAIN_PRE_EMPHASIS_6; 1296 case DP_TRAIN_VOLTAGE_SWING_800: 1297 return DP_TRAIN_PRE_EMPHASIS_3_5; 1298 case DP_TRAIN_VOLTAGE_SWING_1200: 1299 default: 1300 return DP_TRAIN_PRE_EMPHASIS_0; 1301 } 1302 } 1303 */ 1304 static void 1305 cdv_intel_get_adjust_train(struct gma_encoder *encoder) 1306 { 1307 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1308 uint8_t v = 0; 1309 uint8_t p = 0; 1310 int lane; 1311 1312 for (lane = 0; lane < intel_dp->lane_count; lane++) { 1313 uint8_t this_v = cdv_intel_get_adjust_request_voltage(intel_dp->link_status, lane); 1314 uint8_t this_p = cdv_intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); 1315 1316 if (this_v > v) 1317 v = this_v; 1318 if (this_p > p) 1319 p = this_p; 1320 } 1321 1322 if (v >= CDV_DP_VOLTAGE_MAX) 1323 v = CDV_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; 1324 1325 if (p == DP_TRAIN_PRE_EMPHASIS_MASK) 1326 p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; 1327 1328 for (lane = 0; lane < 4; lane++) 1329 intel_dp->train_set[lane] = v | p; 1330 } 1331 1332 1333 static uint8_t 1334 cdv_intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], 1335 int lane) 1336 { 1337 int i = DP_LANE0_1_STATUS + (lane >> 1); 1338 int s = (lane & 1) * 4; 1339 uint8_t l = cdv_intel_dp_link_status(link_status, i); 1340 1341 return (l >> s) & 0xf; 1342 } 1343 1344 /* Check for clock recovery is done on all channels */ 1345 static bool 1346 cdv_intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) 1347 { 1348 int lane; 1349 uint8_t lane_status; 1350 1351 for (lane = 0; lane < lane_count; lane++) { 1352 lane_status = cdv_intel_get_lane_status(link_status, lane); 1353 if ((lane_status & DP_LANE_CR_DONE) == 0) 1354 return false; 1355 } 1356 return true; 1357 } 1358 1359 /* Check to see if channel eq is done on all channels */ 1360 #define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ 1361 DP_LANE_CHANNEL_EQ_DONE|\ 1362 DP_LANE_SYMBOL_LOCKED) 1363 static bool 1364 cdv_intel_channel_eq_ok(struct gma_encoder *encoder) 1365 { 1366 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1367 uint8_t lane_align; 1368 uint8_t lane_status; 1369 int lane; 1370 1371 lane_align = cdv_intel_dp_link_status(intel_dp->link_status, 1372 DP_LANE_ALIGN_STATUS_UPDATED); 1373 if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) 1374 return false; 1375 for (lane = 0; lane < intel_dp->lane_count; lane++) { 1376 lane_status = cdv_intel_get_lane_status(intel_dp->link_status, lane); 1377 if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) 1378 return false; 1379 } 1380 return true; 1381 } 1382 1383 static bool 1384 cdv_intel_dp_set_link_train(struct gma_encoder *encoder, 1385 uint32_t dp_reg_value, 1386 uint8_t dp_train_pat) 1387 { 1388 1389 struct drm_device *dev = encoder->base.dev; 1390 int ret; 1391 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1392 1393 REG_WRITE(intel_dp->output_reg, dp_reg_value); 1394 REG_READ(intel_dp->output_reg); 1395 1396 ret = cdv_intel_dp_aux_native_write_1(encoder, 1397 DP_TRAINING_PATTERN_SET, 1398 dp_train_pat); 1399 1400 if (ret != 1) { 1401 DRM_DEBUG_KMS("Failure in setting link pattern %x\n", 1402 dp_train_pat); 1403 return false; 1404 } 1405 1406 return true; 1407 } 1408 1409 1410 static bool 1411 cdv_intel_dplink_set_level(struct gma_encoder *encoder, 1412 uint8_t dp_train_pat) 1413 { 1414 1415 int ret; 1416 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1417 1418 ret = cdv_intel_dp_aux_native_write(encoder, 1419 DP_TRAINING_LANE0_SET, 1420 intel_dp->train_set, 1421 intel_dp->lane_count); 1422 1423 if (ret != intel_dp->lane_count) { 1424 DRM_DEBUG_KMS("Failure in setting level %d, lane_cnt= %d\n", 1425 intel_dp->train_set[0], intel_dp->lane_count); 1426 return false; 1427 } 1428 return true; 1429 } 1430 1431 static void 1432 cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level) 1433 { 1434 struct drm_device *dev = encoder->base.dev; 1435 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1436 struct ddi_regoff *ddi_reg; 1437 int vswing, premph, index; 1438 1439 if (intel_dp->output_reg == DP_B) 1440 ddi_reg = &ddi_DP_train_table[0]; 1441 else 1442 ddi_reg = &ddi_DP_train_table[1]; 1443 1444 vswing = (signal_level & DP_TRAIN_VOLTAGE_SWING_MASK); 1445 premph = ((signal_level & DP_TRAIN_PRE_EMPHASIS_MASK)) >> 1446 DP_TRAIN_PRE_EMPHASIS_SHIFT; 1447 1448 if (vswing + premph > 3) 1449 return; 1450 #ifdef CDV_FAST_LINK_TRAIN 1451 return; 1452 #endif 1453 DRM_DEBUG_KMS("Test2\n"); 1454 //return ; 1455 cdv_sb_reset(dev); 1456 /* ;Swing voltage programming 1457 ;gfx_dpio_set_reg(0xc058, 0x0505313A) */ 1458 cdv_sb_write(dev, ddi_reg->VSwing5, 0x0505313A); 1459 1460 /* ;gfx_dpio_set_reg(0x8154, 0x43406055) */ 1461 cdv_sb_write(dev, ddi_reg->VSwing1, 0x43406055); 1462 1463 /* ;gfx_dpio_set_reg(0x8148, 0x55338954) 1464 * The VSwing_PreEmph table is also considered based on the vswing/premp 1465 */ 1466 index = (vswing + premph) * 2; 1467 if (premph == 1 && vswing == 1) { 1468 cdv_sb_write(dev, ddi_reg->VSwing2, 0x055738954); 1469 } else 1470 cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]); 1471 1472 /* ;gfx_dpio_set_reg(0x814c, 0x40802040) */ 1473 if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3) 1474 cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040); 1475 else 1476 cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040); 1477 1478 /* ;gfx_dpio_set_reg(0x8150, 0x2b405555) */ 1479 /* cdv_sb_write(dev, ddi_reg->VSwing4, 0x2b405555); */ 1480 1481 /* ;gfx_dpio_set_reg(0x8154, 0xc3406055) */ 1482 cdv_sb_write(dev, ddi_reg->VSwing1, 0xc3406055); 1483 1484 /* ;Pre emphasis programming 1485 * ;gfx_dpio_set_reg(0xc02c, 0x1f030040) 1486 */ 1487 cdv_sb_write(dev, ddi_reg->PreEmph1, 0x1f030040); 1488 1489 /* ;gfx_dpio_set_reg(0x8124, 0x00004000) */ 1490 index = 2 * premph + 1; 1491 cdv_sb_write(dev, ddi_reg->PreEmph2, dp_vswing_premph_table[index]); 1492 return; 1493 } 1494 1495 1496 /* Enable corresponding port and start training pattern 1 */ 1497 static void 1498 cdv_intel_dp_start_link_train(struct gma_encoder *encoder) 1499 { 1500 struct drm_device *dev = encoder->base.dev; 1501 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1502 int i; 1503 uint8_t voltage; 1504 bool clock_recovery = false; 1505 int tries; 1506 u32 reg; 1507 uint32_t DP = intel_dp->DP; 1508 1509 DP |= DP_PORT_EN; 1510 DP &= ~DP_LINK_TRAIN_MASK; 1511 1512 reg = DP; 1513 reg |= DP_LINK_TRAIN_PAT_1; 1514 /* Enable output, wait for it to become active */ 1515 REG_WRITE(intel_dp->output_reg, reg); 1516 REG_READ(intel_dp->output_reg); 1517 gma_wait_for_vblank(dev); 1518 1519 DRM_DEBUG_KMS("Link config\n"); 1520 /* Write the link configuration data */ 1521 cdv_intel_dp_aux_native_write(encoder, DP_LINK_BW_SET, 1522 intel_dp->link_configuration, 1523 2); 1524 1525 memset(intel_dp->train_set, 0, 4); 1526 voltage = 0; 1527 tries = 0; 1528 clock_recovery = false; 1529 1530 DRM_DEBUG_KMS("Start train\n"); 1531 reg = DP | DP_LINK_TRAIN_PAT_1; 1532 1533 1534 for (;;) { 1535 /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ 1536 DRM_DEBUG_KMS("DP Link Train Set %x, Link_config %x, %x\n", 1537 intel_dp->train_set[0], 1538 intel_dp->link_configuration[0], 1539 intel_dp->link_configuration[1]); 1540 1541 if (!cdv_intel_dp_set_link_train(encoder, reg, DP_TRAINING_PATTERN_1)) { 1542 DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 1\n"); 1543 } 1544 cdv_intel_dp_set_vswing_premph(encoder, intel_dp->train_set[0]); 1545 /* Set training pattern 1 */ 1546 1547 cdv_intel_dplink_set_level(encoder, DP_TRAINING_PATTERN_1); 1548 1549 udelay(200); 1550 if (!cdv_intel_dp_get_link_status(encoder)) 1551 break; 1552 1553 DRM_DEBUG_KMS("DP Link status %x, %x, %x, %x, %x, %x\n", 1554 intel_dp->link_status[0], intel_dp->link_status[1], intel_dp->link_status[2], 1555 intel_dp->link_status[3], intel_dp->link_status[4], intel_dp->link_status[5]); 1556 1557 if (cdv_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { 1558 DRM_DEBUG_KMS("PT1 train is done\n"); 1559 clock_recovery = true; 1560 break; 1561 } 1562 1563 /* Check to see if we've tried the max voltage */ 1564 for (i = 0; i < intel_dp->lane_count; i++) 1565 if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) 1566 break; 1567 if (i == intel_dp->lane_count) 1568 break; 1569 1570 /* Check to see if we've tried the same voltage 5 times */ 1571 if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { 1572 ++tries; 1573 if (tries == 5) 1574 break; 1575 } else 1576 tries = 0; 1577 voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; 1578 1579 /* Compute new intel_dp->train_set as requested by target */ 1580 cdv_intel_get_adjust_train(encoder); 1581 1582 } 1583 1584 if (!clock_recovery) { 1585 DRM_DEBUG_KMS("failure in DP patter 1 training, train set %x\n", intel_dp->train_set[0]); 1586 } 1587 1588 intel_dp->DP = DP; 1589 } 1590 1591 static void 1592 cdv_intel_dp_complete_link_train(struct gma_encoder *encoder) 1593 { 1594 struct drm_device *dev = encoder->base.dev; 1595 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1596 bool channel_eq = false; 1597 int tries, cr_tries; 1598 u32 reg; 1599 uint32_t DP = intel_dp->DP; 1600 1601 /* channel equalization */ 1602 tries = 0; 1603 cr_tries = 0; 1604 channel_eq = false; 1605 1606 DRM_DEBUG_KMS("\n"); 1607 reg = DP | DP_LINK_TRAIN_PAT_2; 1608 1609 for (;;) { 1610 1611 DRM_DEBUG_KMS("DP Link Train Set %x, Link_config %x, %x\n", 1612 intel_dp->train_set[0], 1613 intel_dp->link_configuration[0], 1614 intel_dp->link_configuration[1]); 1615 /* channel eq pattern */ 1616 1617 if (!cdv_intel_dp_set_link_train(encoder, reg, 1618 DP_TRAINING_PATTERN_2)) { 1619 DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 2\n"); 1620 } 1621 /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ 1622 1623 if (cr_tries > 5) { 1624 DRM_ERROR("failed to train DP, aborting\n"); 1625 cdv_intel_dp_link_down(encoder); 1626 break; 1627 } 1628 1629 cdv_intel_dp_set_vswing_premph(encoder, intel_dp->train_set[0]); 1630 1631 cdv_intel_dplink_set_level(encoder, DP_TRAINING_PATTERN_2); 1632 1633 udelay(1000); 1634 if (!cdv_intel_dp_get_link_status(encoder)) 1635 break; 1636 1637 DRM_DEBUG_KMS("DP Link status %x, %x, %x, %x, %x, %x\n", 1638 intel_dp->link_status[0], intel_dp->link_status[1], intel_dp->link_status[2], 1639 intel_dp->link_status[3], intel_dp->link_status[4], intel_dp->link_status[5]); 1640 1641 /* Make sure clock is still ok */ 1642 if (!cdv_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { 1643 cdv_intel_dp_start_link_train(encoder); 1644 cr_tries++; 1645 continue; 1646 } 1647 1648 if (cdv_intel_channel_eq_ok(encoder)) { 1649 DRM_DEBUG_KMS("PT2 train is done\n"); 1650 channel_eq = true; 1651 break; 1652 } 1653 1654 /* Try 5 times, then try clock recovery if that fails */ 1655 if (tries > 5) { 1656 cdv_intel_dp_link_down(encoder); 1657 cdv_intel_dp_start_link_train(encoder); 1658 tries = 0; 1659 cr_tries++; 1660 continue; 1661 } 1662 1663 /* Compute new intel_dp->train_set as requested by target */ 1664 cdv_intel_get_adjust_train(encoder); 1665 ++tries; 1666 1667 } 1668 1669 reg = DP | DP_LINK_TRAIN_OFF; 1670 1671 REG_WRITE(intel_dp->output_reg, reg); 1672 REG_READ(intel_dp->output_reg); 1673 cdv_intel_dp_aux_native_write_1(encoder, 1674 DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); 1675 } 1676 1677 static void 1678 cdv_intel_dp_link_down(struct gma_encoder *encoder) 1679 { 1680 struct drm_device *dev = encoder->base.dev; 1681 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1682 uint32_t DP = intel_dp->DP; 1683 1684 if ((REG_READ(intel_dp->output_reg) & DP_PORT_EN) == 0) 1685 return; 1686 1687 DRM_DEBUG_KMS("\n"); 1688 1689 1690 { 1691 DP &= ~DP_LINK_TRAIN_MASK; 1692 REG_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE); 1693 } 1694 REG_READ(intel_dp->output_reg); 1695 1696 msleep(17); 1697 1698 REG_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); 1699 REG_READ(intel_dp->output_reg); 1700 } 1701 1702 static enum drm_connector_status cdv_dp_detect(struct gma_encoder *encoder) 1703 { 1704 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1705 enum drm_connector_status status; 1706 1707 status = connector_status_disconnected; 1708 if (cdv_intel_dp_aux_native_read(encoder, 0x000, intel_dp->dpcd, 1709 sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd)) 1710 { 1711 if (intel_dp->dpcd[DP_DPCD_REV] != 0) 1712 status = connector_status_connected; 1713 } 1714 if (status == connector_status_connected) 1715 DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n", 1716 intel_dp->dpcd[0], intel_dp->dpcd[1], 1717 intel_dp->dpcd[2], intel_dp->dpcd[3]); 1718 return status; 1719 } 1720 1721 /** 1722 * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. 1723 * 1724 * \return true if DP port is connected. 1725 * \return false if DP port is disconnected. 1726 */ 1727 static enum drm_connector_status 1728 cdv_intel_dp_detect(struct drm_connector *connector, bool force) 1729 { 1730 struct gma_encoder *encoder = gma_attached_encoder(connector); 1731 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1732 enum drm_connector_status status; 1733 struct edid *edid = NULL; 1734 int edp = is_edp(encoder); 1735 1736 intel_dp->has_audio = false; 1737 1738 if (edp) 1739 cdv_intel_edp_panel_vdd_on(encoder); 1740 status = cdv_dp_detect(encoder); 1741 if (status != connector_status_connected) { 1742 if (edp) 1743 cdv_intel_edp_panel_vdd_off(encoder); 1744 return status; 1745 } 1746 1747 if (intel_dp->force_audio) { 1748 intel_dp->has_audio = intel_dp->force_audio > 0; 1749 } else { 1750 edid = drm_get_edid(connector, &intel_dp->adapter); 1751 if (edid) { 1752 intel_dp->has_audio = drm_detect_monitor_audio(edid); 1753 kfree(edid); 1754 } 1755 } 1756 if (edp) 1757 cdv_intel_edp_panel_vdd_off(encoder); 1758 1759 return connector_status_connected; 1760 } 1761 1762 static int cdv_intel_dp_get_modes(struct drm_connector *connector) 1763 { 1764 struct gma_encoder *intel_encoder = gma_attached_encoder(connector); 1765 struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; 1766 struct edid *edid = NULL; 1767 int ret = 0; 1768 int edp = is_edp(intel_encoder); 1769 1770 1771 edid = drm_get_edid(connector, &intel_dp->adapter); 1772 if (edid) { 1773 drm_mode_connector_update_edid_property(connector, edid); 1774 ret = drm_add_edid_modes(connector, edid); 1775 kfree(edid); 1776 } 1777 1778 if (is_edp(intel_encoder)) { 1779 struct drm_device *dev = connector->dev; 1780 struct drm_psb_private *dev_priv = dev->dev_private; 1781 1782 cdv_intel_edp_panel_vdd_off(intel_encoder); 1783 if (ret) { 1784 if (edp && !intel_dp->panel_fixed_mode) { 1785 struct drm_display_mode *newmode; 1786 list_for_each_entry(newmode, &connector->probed_modes, 1787 head) { 1788 if (newmode->type & DRM_MODE_TYPE_PREFERRED) { 1789 intel_dp->panel_fixed_mode = 1790 drm_mode_duplicate(dev, newmode); 1791 break; 1792 } 1793 } 1794 } 1795 1796 return ret; 1797 } 1798 if (!intel_dp->panel_fixed_mode && dev_priv->lfp_lvds_vbt_mode) { 1799 intel_dp->panel_fixed_mode = 1800 drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); 1801 if (intel_dp->panel_fixed_mode) { 1802 intel_dp->panel_fixed_mode->type |= 1803 DRM_MODE_TYPE_PREFERRED; 1804 } 1805 } 1806 if (intel_dp->panel_fixed_mode != NULL) { 1807 struct drm_display_mode *mode; 1808 mode = drm_mode_duplicate(dev, intel_dp->panel_fixed_mode); 1809 drm_mode_probed_add(connector, mode); 1810 return 1; 1811 } 1812 } 1813 1814 return ret; 1815 } 1816 1817 static bool 1818 cdv_intel_dp_detect_audio(struct drm_connector *connector) 1819 { 1820 struct gma_encoder *encoder = gma_attached_encoder(connector); 1821 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1822 struct edid *edid; 1823 bool has_audio = false; 1824 int edp = is_edp(encoder); 1825 1826 if (edp) 1827 cdv_intel_edp_panel_vdd_on(encoder); 1828 1829 edid = drm_get_edid(connector, &intel_dp->adapter); 1830 if (edid) { 1831 has_audio = drm_detect_monitor_audio(edid); 1832 kfree(edid); 1833 } 1834 if (edp) 1835 cdv_intel_edp_panel_vdd_off(encoder); 1836 1837 return has_audio; 1838 } 1839 1840 static int 1841 cdv_intel_dp_set_property(struct drm_connector *connector, 1842 struct drm_property *property, 1843 uint64_t val) 1844 { 1845 struct drm_psb_private *dev_priv = connector->dev->dev_private; 1846 struct gma_encoder *encoder = gma_attached_encoder(connector); 1847 struct cdv_intel_dp *intel_dp = encoder->dev_priv; 1848 int ret; 1849 1850 ret = drm_object_property_set_value(&connector->base, property, val); 1851 if (ret) 1852 return ret; 1853 1854 if (property == dev_priv->force_audio_property) { 1855 int i = val; 1856 bool has_audio; 1857 1858 if (i == intel_dp->force_audio) 1859 return 0; 1860 1861 intel_dp->force_audio = i; 1862 1863 if (i == 0) 1864 has_audio = cdv_intel_dp_detect_audio(connector); 1865 else 1866 has_audio = i > 0; 1867 1868 if (has_audio == intel_dp->has_audio) 1869 return 0; 1870 1871 intel_dp->has_audio = has_audio; 1872 goto done; 1873 } 1874 1875 if (property == dev_priv->broadcast_rgb_property) { 1876 if (val == !!intel_dp->color_range) 1877 return 0; 1878 1879 intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0; 1880 goto done; 1881 } 1882 1883 return -EINVAL; 1884 1885 done: 1886 if (encoder->base.crtc) { 1887 struct drm_crtc *crtc = encoder->base.crtc; 1888 drm_crtc_helper_set_mode(crtc, &crtc->mode, 1889 crtc->x, crtc->y, 1890 crtc->primary->fb); 1891 } 1892 1893 return 0; 1894 } 1895 1896 static void 1897 cdv_intel_dp_destroy(struct drm_connector *connector) 1898 { 1899 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 1900 struct cdv_intel_dp *intel_dp = gma_encoder->dev_priv; 1901 1902 if (is_edp(gma_encoder)) { 1903 /* cdv_intel_panel_destroy_backlight(connector->dev); */ 1904 if (intel_dp->panel_fixed_mode) { 1905 kfree(intel_dp->panel_fixed_mode); 1906 intel_dp->panel_fixed_mode = NULL; 1907 } 1908 } 1909 i2c_del_adapter(&intel_dp->adapter); 1910 drm_connector_unregister(connector); 1911 drm_connector_cleanup(connector); 1912 kfree(connector); 1913 } 1914 1915 static void cdv_intel_dp_encoder_destroy(struct drm_encoder *encoder) 1916 { 1917 drm_encoder_cleanup(encoder); 1918 } 1919 1920 static const struct drm_encoder_helper_funcs cdv_intel_dp_helper_funcs = { 1921 .dpms = cdv_intel_dp_dpms, 1922 .mode_fixup = cdv_intel_dp_mode_fixup, 1923 .prepare = cdv_intel_dp_prepare, 1924 .mode_set = cdv_intel_dp_mode_set, 1925 .commit = cdv_intel_dp_commit, 1926 }; 1927 1928 static const struct drm_connector_funcs cdv_intel_dp_connector_funcs = { 1929 .dpms = drm_helper_connector_dpms, 1930 .detect = cdv_intel_dp_detect, 1931 .fill_modes = drm_helper_probe_single_connector_modes, 1932 .set_property = cdv_intel_dp_set_property, 1933 .destroy = cdv_intel_dp_destroy, 1934 }; 1935 1936 static const struct drm_connector_helper_funcs cdv_intel_dp_connector_helper_funcs = { 1937 .get_modes = cdv_intel_dp_get_modes, 1938 .mode_valid = cdv_intel_dp_mode_valid, 1939 .best_encoder = gma_best_encoder, 1940 }; 1941 1942 static const struct drm_encoder_funcs cdv_intel_dp_enc_funcs = { 1943 .destroy = cdv_intel_dp_encoder_destroy, 1944 }; 1945 1946 1947 static void cdv_intel_dp_add_properties(struct drm_connector *connector) 1948 { 1949 cdv_intel_attach_force_audio_property(connector); 1950 cdv_intel_attach_broadcast_rgb_property(connector); 1951 } 1952 1953 /* check the VBT to see whether the eDP is on DP-D port */ 1954 static bool cdv_intel_dpc_is_edp(struct drm_device *dev) 1955 { 1956 struct drm_psb_private *dev_priv = dev->dev_private; 1957 struct child_device_config *p_child; 1958 int i; 1959 1960 if (!dev_priv->child_dev_num) 1961 return false; 1962 1963 for (i = 0; i < dev_priv->child_dev_num; i++) { 1964 p_child = dev_priv->child_dev + i; 1965 1966 if (p_child->dvo_port == PORT_IDPC && 1967 p_child->device_type == DEVICE_TYPE_eDP) 1968 return true; 1969 } 1970 return false; 1971 } 1972 1973 /* Cedarview display clock gating 1974 1975 We need this disable dot get correct behaviour while enabling 1976 DP/eDP. TODO - investigate if we can turn it back to normality 1977 after enabling */ 1978 static void cdv_disable_intel_clock_gating(struct drm_device *dev) 1979 { 1980 u32 reg_value; 1981 reg_value = REG_READ(DSPCLK_GATE_D); 1982 1983 reg_value |= (DPUNIT_PIPEB_GATE_DISABLE | 1984 DPUNIT_PIPEA_GATE_DISABLE | 1985 DPCUNIT_CLOCK_GATE_DISABLE | 1986 DPLSUNIT_CLOCK_GATE_DISABLE | 1987 DPOUNIT_CLOCK_GATE_DISABLE | 1988 DPIOUNIT_CLOCK_GATE_DISABLE); 1989 1990 REG_WRITE(DSPCLK_GATE_D, reg_value); 1991 1992 udelay(500); 1993 } 1994 1995 void 1996 cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, int output_reg) 1997 { 1998 struct gma_encoder *gma_encoder; 1999 struct gma_connector *gma_connector; 2000 struct drm_connector *connector; 2001 struct drm_encoder *encoder; 2002 struct cdv_intel_dp *intel_dp; 2003 const char *name = NULL; 2004 int type = DRM_MODE_CONNECTOR_DisplayPort; 2005 2006 gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); 2007 if (!gma_encoder) 2008 return; 2009 gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); 2010 if (!gma_connector) 2011 goto err_connector; 2012 intel_dp = kzalloc(sizeof(struct cdv_intel_dp), GFP_KERNEL); 2013 if (!intel_dp) 2014 goto err_priv; 2015 2016 if ((output_reg == DP_C) && cdv_intel_dpc_is_edp(dev)) 2017 type = DRM_MODE_CONNECTOR_eDP; 2018 2019 connector = &gma_connector->base; 2020 encoder = &gma_encoder->base; 2021 2022 drm_connector_init(dev, connector, &cdv_intel_dp_connector_funcs, type); 2023 drm_encoder_init(dev, encoder, &cdv_intel_dp_enc_funcs, 2024 DRM_MODE_ENCODER_TMDS, NULL); 2025 2026 gma_connector_attach_encoder(gma_connector, gma_encoder); 2027 2028 if (type == DRM_MODE_CONNECTOR_DisplayPort) 2029 gma_encoder->type = INTEL_OUTPUT_DISPLAYPORT; 2030 else 2031 gma_encoder->type = INTEL_OUTPUT_EDP; 2032 2033 2034 gma_encoder->dev_priv=intel_dp; 2035 intel_dp->encoder = gma_encoder; 2036 intel_dp->output_reg = output_reg; 2037 2038 drm_encoder_helper_add(encoder, &cdv_intel_dp_helper_funcs); 2039 drm_connector_helper_add(connector, &cdv_intel_dp_connector_helper_funcs); 2040 2041 connector->polled = DRM_CONNECTOR_POLL_HPD; 2042 connector->interlace_allowed = false; 2043 connector->doublescan_allowed = false; 2044 2045 drm_connector_register(connector); 2046 2047 /* Set up the DDC bus. */ 2048 switch (output_reg) { 2049 case DP_B: 2050 name = "DPDDC-B"; 2051 gma_encoder->ddi_select = (DP_MASK | DDI0_SELECT); 2052 break; 2053 case DP_C: 2054 name = "DPDDC-C"; 2055 gma_encoder->ddi_select = (DP_MASK | DDI1_SELECT); 2056 break; 2057 } 2058 2059 cdv_disable_intel_clock_gating(dev); 2060 2061 cdv_intel_dp_i2c_init(gma_connector, gma_encoder, name); 2062 /* FIXME:fail check */ 2063 cdv_intel_dp_add_properties(connector); 2064 2065 if (is_edp(gma_encoder)) { 2066 int ret; 2067 struct edp_power_seq cur; 2068 u32 pp_on, pp_off, pp_div; 2069 u32 pwm_ctrl; 2070 2071 pp_on = REG_READ(PP_CONTROL); 2072 pp_on &= ~PANEL_UNLOCK_MASK; 2073 pp_on |= PANEL_UNLOCK_REGS; 2074 2075 REG_WRITE(PP_CONTROL, pp_on); 2076 2077 pwm_ctrl = REG_READ(BLC_PWM_CTL2); 2078 pwm_ctrl |= PWM_PIPE_B; 2079 REG_WRITE(BLC_PWM_CTL2, pwm_ctrl); 2080 2081 pp_on = REG_READ(PP_ON_DELAYS); 2082 pp_off = REG_READ(PP_OFF_DELAYS); 2083 pp_div = REG_READ(PP_DIVISOR); 2084 2085 /* Pull timing values out of registers */ 2086 cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >> 2087 PANEL_POWER_UP_DELAY_SHIFT; 2088 2089 cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> 2090 PANEL_LIGHT_ON_DELAY_SHIFT; 2091 2092 cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> 2093 PANEL_LIGHT_OFF_DELAY_SHIFT; 2094 2095 cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >> 2096 PANEL_POWER_DOWN_DELAY_SHIFT; 2097 2098 cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >> 2099 PANEL_POWER_CYCLE_DELAY_SHIFT); 2100 2101 DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", 2102 cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); 2103 2104 2105 intel_dp->panel_power_up_delay = cur.t1_t3 / 10; 2106 intel_dp->backlight_on_delay = cur.t8 / 10; 2107 intel_dp->backlight_off_delay = cur.t9 / 10; 2108 intel_dp->panel_power_down_delay = cur.t10 / 10; 2109 intel_dp->panel_power_cycle_delay = (cur.t11_t12 - 1) * 100; 2110 2111 DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", 2112 intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, 2113 intel_dp->panel_power_cycle_delay); 2114 2115 DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", 2116 intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); 2117 2118 2119 cdv_intel_edp_panel_vdd_on(gma_encoder); 2120 ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, 2121 intel_dp->dpcd, 2122 sizeof(intel_dp->dpcd)); 2123 cdv_intel_edp_panel_vdd_off(gma_encoder); 2124 if (ret == 0) { 2125 /* if this fails, presume the device is a ghost */ 2126 DRM_INFO("failed to retrieve link info, disabling eDP\n"); 2127 cdv_intel_dp_encoder_destroy(encoder); 2128 cdv_intel_dp_destroy(connector); 2129 goto err_priv; 2130 } else { 2131 DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n", 2132 intel_dp->dpcd[0], intel_dp->dpcd[1], 2133 intel_dp->dpcd[2], intel_dp->dpcd[3]); 2134 2135 } 2136 /* The CDV reference driver moves pnale backlight setup into the displays that 2137 have a backlight: this is a good idea and one we should probably adopt, however 2138 we need to migrate all the drivers before we can do that */ 2139 /*cdv_intel_panel_setup_backlight(dev); */ 2140 } 2141 return; 2142 2143 err_priv: 2144 kfree(gma_connector); 2145 err_connector: 2146 kfree(gma_encoder); 2147 } 2148