1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* exynos_drm_fimd.c
3  *
4  * Copyright (C) 2011 Samsung Electronics Co.Ltd
5  * Authors:
6  *	Joonyoung Shim <jy0922.shim@samsung.com>
7  *	Inki Dae <inki.dae@samsung.com>
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/component.h>
12 #include <linux/kernel.h>
13 #include <linux/mfd/syscon.h>
14 #include <linux/of.h>
15 #include <linux/of_device.h>
16 #include <linux/platform_device.h>
17 #include <linux/pm_runtime.h>
18 #include <linux/regmap.h>
19 
20 #include <video/of_display_timing.h>
21 #include <video/of_videomode.h>
22 #include <video/samsung_fimd.h>
23 
24 #include <drm/drm_fourcc.h>
25 #include <drm/drm_vblank.h>
26 #include <drm/exynos_drm.h>
27 
28 #include "exynos_drm_crtc.h"
29 #include "exynos_drm_drv.h"
30 #include "exynos_drm_fb.h"
31 #include "exynos_drm_plane.h"
32 
33 /*
34  * FIMD stands for Fully Interactive Mobile Display and
35  * as a display controller, it transfers contents drawn on memory
36  * to a LCD Panel through Display Interfaces such as RGB or
37  * CPU Interface.
38  */
39 
40 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128
41 
42 /* position control register for hardware window 0, 2 ~ 4.*/
43 #define VIDOSD_A(win)		(VIDOSD_BASE + 0x00 + (win) * 16)
44 #define VIDOSD_B(win)		(VIDOSD_BASE + 0x04 + (win) * 16)
45 /*
46  * size control register for hardware windows 0 and alpha control register
47  * for hardware windows 1 ~ 4
48  */
49 #define VIDOSD_C(win)		(VIDOSD_BASE + 0x08 + (win) * 16)
50 /* size control register for hardware windows 1 ~ 2. */
51 #define VIDOSD_D(win)		(VIDOSD_BASE + 0x0C + (win) * 16)
52 
53 #define VIDWnALPHA0(win)	(VIDW_ALPHA + 0x00 + (win) * 8)
54 #define VIDWnALPHA1(win)	(VIDW_ALPHA + 0x04 + (win) * 8)
55 
56 #define VIDWx_BUF_START(win, buf)	(VIDW_BUF_START(buf) + (win) * 8)
57 #define VIDWx_BUF_START_S(win, buf)	(VIDW_BUF_START_S(buf) + (win) * 8)
58 #define VIDWx_BUF_END(win, buf)		(VIDW_BUF_END(buf) + (win) * 8)
59 #define VIDWx_BUF_SIZE(win, buf)	(VIDW_BUF_SIZE(buf) + (win) * 4)
60 
61 /* color key control register for hardware window 1 ~ 4. */
62 #define WKEYCON0_BASE(x)		((WKEYCON0 + 0x140) + ((x - 1) * 8))
63 /* color key value register for hardware window 1 ~ 4. */
64 #define WKEYCON1_BASE(x)		((WKEYCON1 + 0x140) + ((x - 1) * 8))
65 
66 /* I80 trigger control register */
67 #define TRIGCON				0x1A4
68 #define TRGMODE_ENABLE			(1 << 0)
69 #define SWTRGCMD_ENABLE			(1 << 1)
70 /* Exynos3250, 3472, 5260 5410, 5420 and 5422 only supported. */
71 #define HWTRGEN_ENABLE			(1 << 3)
72 #define HWTRGMASK_ENABLE		(1 << 4)
73 /* Exynos3250, 3472, 5260, 5420 and 5422 only supported. */
74 #define HWTRIGEN_PER_ENABLE		(1 << 31)
75 
76 /* display mode change control register except exynos4 */
77 #define VIDOUT_CON			0x000
78 #define VIDOUT_CON_F_I80_LDI0		(0x2 << 8)
79 
80 /* I80 interface control for main LDI register */
81 #define I80IFCONFAx(x)			(0x1B0 + (x) * 4)
82 #define I80IFCONFBx(x)			(0x1B8 + (x) * 4)
83 #define LCD_CS_SETUP(x)			((x) << 16)
84 #define LCD_WR_SETUP(x)			((x) << 12)
85 #define LCD_WR_ACTIVE(x)		((x) << 8)
86 #define LCD_WR_HOLD(x)			((x) << 4)
87 #define I80IFEN_ENABLE			(1 << 0)
88 
89 /* FIMD has totally five hardware windows. */
90 #define WINDOWS_NR	5
91 
92 /* HW trigger flag on i80 panel. */
93 #define I80_HW_TRG     (1 << 1)
94 
95 struct fimd_driver_data {
96 	unsigned int timing_base;
97 	unsigned int lcdblk_offset;
98 	unsigned int lcdblk_vt_shift;
99 	unsigned int lcdblk_bypass_shift;
100 	unsigned int lcdblk_mic_bypass_shift;
101 	unsigned int trg_type;
102 
103 	unsigned int has_shadowcon:1;
104 	unsigned int has_clksel:1;
105 	unsigned int has_limited_fmt:1;
106 	unsigned int has_vidoutcon:1;
107 	unsigned int has_vtsel:1;
108 	unsigned int has_mic_bypass:1;
109 	unsigned int has_dp_clk:1;
110 	unsigned int has_hw_trigger:1;
111 	unsigned int has_trigger_per_te:1;
112 };
113 
114 static struct fimd_driver_data s3c64xx_fimd_driver_data = {
115 	.timing_base = 0x0,
116 	.has_clksel = 1,
117 	.has_limited_fmt = 1,
118 };
119 
120 static struct fimd_driver_data s5pv210_fimd_driver_data = {
121 	.timing_base = 0x0,
122 	.has_shadowcon = 1,
123 	.has_clksel = 1,
124 };
125 
126 static struct fimd_driver_data exynos3_fimd_driver_data = {
127 	.timing_base = 0x20000,
128 	.lcdblk_offset = 0x210,
129 	.lcdblk_bypass_shift = 1,
130 	.has_shadowcon = 1,
131 	.has_vidoutcon = 1,
132 };
133 
134 static struct fimd_driver_data exynos4_fimd_driver_data = {
135 	.timing_base = 0x0,
136 	.lcdblk_offset = 0x210,
137 	.lcdblk_vt_shift = 10,
138 	.lcdblk_bypass_shift = 1,
139 	.has_shadowcon = 1,
140 	.has_vtsel = 1,
141 };
142 
143 static struct fimd_driver_data exynos5_fimd_driver_data = {
144 	.timing_base = 0x20000,
145 	.lcdblk_offset = 0x214,
146 	.lcdblk_vt_shift = 24,
147 	.lcdblk_bypass_shift = 15,
148 	.has_shadowcon = 1,
149 	.has_vidoutcon = 1,
150 	.has_vtsel = 1,
151 	.has_dp_clk = 1,
152 };
153 
154 static struct fimd_driver_data exynos5420_fimd_driver_data = {
155 	.timing_base = 0x20000,
156 	.lcdblk_offset = 0x214,
157 	.lcdblk_vt_shift = 24,
158 	.lcdblk_bypass_shift = 15,
159 	.lcdblk_mic_bypass_shift = 11,
160 	.has_shadowcon = 1,
161 	.has_vidoutcon = 1,
162 	.has_vtsel = 1,
163 	.has_mic_bypass = 1,
164 	.has_dp_clk = 1,
165 };
166 
167 struct fimd_context {
168 	struct device			*dev;
169 	struct drm_device		*drm_dev;
170 	struct exynos_drm_crtc		*crtc;
171 	struct exynos_drm_plane		planes[WINDOWS_NR];
172 	struct exynos_drm_plane_config	configs[WINDOWS_NR];
173 	struct clk			*bus_clk;
174 	struct clk			*lcd_clk;
175 	void __iomem			*regs;
176 	struct regmap			*sysreg;
177 	unsigned long			irq_flags;
178 	u32				vidcon0;
179 	u32				vidcon1;
180 	u32				vidout_con;
181 	u32				i80ifcon;
182 	bool				i80_if;
183 	bool				suspended;
184 	wait_queue_head_t		wait_vsync_queue;
185 	atomic_t			wait_vsync_event;
186 	atomic_t			win_updated;
187 	atomic_t			triggering;
188 	u32				clkdiv;
189 
190 	const struct fimd_driver_data *driver_data;
191 	struct drm_encoder *encoder;
192 	struct exynos_drm_clk		dp_clk;
193 };
194 
195 static const struct of_device_id fimd_driver_dt_match[] = {
196 	{ .compatible = "samsung,s3c6400-fimd",
197 	  .data = &s3c64xx_fimd_driver_data },
198 	{ .compatible = "samsung,s5pv210-fimd",
199 	  .data = &s5pv210_fimd_driver_data },
200 	{ .compatible = "samsung,exynos3250-fimd",
201 	  .data = &exynos3_fimd_driver_data },
202 	{ .compatible = "samsung,exynos4210-fimd",
203 	  .data = &exynos4_fimd_driver_data },
204 	{ .compatible = "samsung,exynos5250-fimd",
205 	  .data = &exynos5_fimd_driver_data },
206 	{ .compatible = "samsung,exynos5420-fimd",
207 	  .data = &exynos5420_fimd_driver_data },
208 	{},
209 };
210 MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
211 
212 static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = {
213 	DRM_PLANE_TYPE_PRIMARY,
214 	DRM_PLANE_TYPE_OVERLAY,
215 	DRM_PLANE_TYPE_OVERLAY,
216 	DRM_PLANE_TYPE_OVERLAY,
217 	DRM_PLANE_TYPE_CURSOR,
218 };
219 
220 static const uint32_t fimd_formats[] = {
221 	DRM_FORMAT_C8,
222 	DRM_FORMAT_XRGB1555,
223 	DRM_FORMAT_RGB565,
224 	DRM_FORMAT_XRGB8888,
225 	DRM_FORMAT_ARGB8888,
226 };
227 
228 static const unsigned int capabilities[WINDOWS_NR] = {
229 	0,
230 	EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
231 	EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
232 	EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
233 	EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
234 };
235 
236 static inline void fimd_set_bits(struct fimd_context *ctx, u32 reg, u32 mask,
237 				 u32 val)
238 {
239 	val = (val & mask) | (readl(ctx->regs + reg) & ~mask);
240 	writel(val, ctx->regs + reg);
241 }
242 
243 static int fimd_enable_vblank(struct exynos_drm_crtc *crtc)
244 {
245 	struct fimd_context *ctx = crtc->ctx;
246 	u32 val;
247 
248 	if (ctx->suspended)
249 		return -EPERM;
250 
251 	if (!test_and_set_bit(0, &ctx->irq_flags)) {
252 		val = readl(ctx->regs + VIDINTCON0);
253 
254 		val |= VIDINTCON0_INT_ENABLE;
255 
256 		if (ctx->i80_if) {
257 			val |= VIDINTCON0_INT_I80IFDONE;
258 			val |= VIDINTCON0_INT_SYSMAINCON;
259 			val &= ~VIDINTCON0_INT_SYSSUBCON;
260 		} else {
261 			val |= VIDINTCON0_INT_FRAME;
262 
263 			val &= ~VIDINTCON0_FRAMESEL0_MASK;
264 			val |= VIDINTCON0_FRAMESEL0_FRONTPORCH;
265 			val &= ~VIDINTCON0_FRAMESEL1_MASK;
266 			val |= VIDINTCON0_FRAMESEL1_NONE;
267 		}
268 
269 		writel(val, ctx->regs + VIDINTCON0);
270 	}
271 
272 	return 0;
273 }
274 
275 static void fimd_disable_vblank(struct exynos_drm_crtc *crtc)
276 {
277 	struct fimd_context *ctx = crtc->ctx;
278 	u32 val;
279 
280 	if (ctx->suspended)
281 		return;
282 
283 	if (test_and_clear_bit(0, &ctx->irq_flags)) {
284 		val = readl(ctx->regs + VIDINTCON0);
285 
286 		val &= ~VIDINTCON0_INT_ENABLE;
287 
288 		if (ctx->i80_if) {
289 			val &= ~VIDINTCON0_INT_I80IFDONE;
290 			val &= ~VIDINTCON0_INT_SYSMAINCON;
291 			val &= ~VIDINTCON0_INT_SYSSUBCON;
292 		} else
293 			val &= ~VIDINTCON0_INT_FRAME;
294 
295 		writel(val, ctx->regs + VIDINTCON0);
296 	}
297 }
298 
299 static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc)
300 {
301 	struct fimd_context *ctx = crtc->ctx;
302 
303 	if (ctx->suspended)
304 		return;
305 
306 	atomic_set(&ctx->wait_vsync_event, 1);
307 
308 	/*
309 	 * wait for FIMD to signal VSYNC interrupt or return after
310 	 * timeout which is set to 50ms (refresh rate of 20).
311 	 */
312 	if (!wait_event_timeout(ctx->wait_vsync_queue,
313 				!atomic_read(&ctx->wait_vsync_event),
314 				HZ/20))
315 		DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n");
316 }
317 
318 static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win,
319 					bool enable)
320 {
321 	u32 val = readl(ctx->regs + WINCON(win));
322 
323 	if (enable)
324 		val |= WINCONx_ENWIN;
325 	else
326 		val &= ~WINCONx_ENWIN;
327 
328 	writel(val, ctx->regs + WINCON(win));
329 }
330 
331 static void fimd_enable_shadow_channel_path(struct fimd_context *ctx,
332 						unsigned int win,
333 						bool enable)
334 {
335 	u32 val = readl(ctx->regs + SHADOWCON);
336 
337 	if (enable)
338 		val |= SHADOWCON_CHx_ENABLE(win);
339 	else
340 		val &= ~SHADOWCON_CHx_ENABLE(win);
341 
342 	writel(val, ctx->regs + SHADOWCON);
343 }
344 
345 static void fimd_clear_channels(struct exynos_drm_crtc *crtc)
346 {
347 	struct fimd_context *ctx = crtc->ctx;
348 	unsigned int win, ch_enabled = 0;
349 
350 	/* Hardware is in unknown state, so ensure it gets enabled properly */
351 	pm_runtime_get_sync(ctx->dev);
352 
353 	clk_prepare_enable(ctx->bus_clk);
354 	clk_prepare_enable(ctx->lcd_clk);
355 
356 	/* Check if any channel is enabled. */
357 	for (win = 0; win < WINDOWS_NR; win++) {
358 		u32 val = readl(ctx->regs + WINCON(win));
359 
360 		if (val & WINCONx_ENWIN) {
361 			fimd_enable_video_output(ctx, win, false);
362 
363 			if (ctx->driver_data->has_shadowcon)
364 				fimd_enable_shadow_channel_path(ctx, win,
365 								false);
366 
367 			ch_enabled = 1;
368 		}
369 	}
370 
371 	/* Wait for vsync, as disable channel takes effect at next vsync */
372 	if (ch_enabled) {
373 		ctx->suspended = false;
374 
375 		fimd_enable_vblank(ctx->crtc);
376 		fimd_wait_for_vblank(ctx->crtc);
377 		fimd_disable_vblank(ctx->crtc);
378 
379 		ctx->suspended = true;
380 	}
381 
382 	clk_disable_unprepare(ctx->lcd_clk);
383 	clk_disable_unprepare(ctx->bus_clk);
384 
385 	pm_runtime_put(ctx->dev);
386 }
387 
388 
389 static int fimd_atomic_check(struct exynos_drm_crtc *crtc,
390 		struct drm_crtc_state *state)
391 {
392 	struct drm_display_mode *mode = &state->adjusted_mode;
393 	struct fimd_context *ctx = crtc->ctx;
394 	unsigned long ideal_clk, lcd_rate;
395 	u32 clkdiv;
396 
397 	if (mode->clock == 0) {
398 		DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n");
399 		return -EINVAL;
400 	}
401 
402 	ideal_clk = mode->clock * 1000;
403 
404 	if (ctx->i80_if) {
405 		/*
406 		 * The frame done interrupt should be occurred prior to the
407 		 * next TE signal.
408 		 */
409 		ideal_clk *= 2;
410 	}
411 
412 	lcd_rate = clk_get_rate(ctx->lcd_clk);
413 	if (2 * lcd_rate < ideal_clk) {
414 		DRM_DEV_ERROR(ctx->dev,
415 			      "sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n",
416 			      lcd_rate, ideal_clk);
417 		return -EINVAL;
418 	}
419 
420 	/* Find the clock divider value that gets us closest to ideal_clk */
421 	clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk);
422 	if (clkdiv >= 0x200) {
423 		DRM_DEV_ERROR(ctx->dev, "requested pixel clock(%lu) too low\n",
424 			      ideal_clk);
425 		return -EINVAL;
426 	}
427 
428 	ctx->clkdiv = (clkdiv < 0x100) ? clkdiv : 0xff;
429 
430 	return 0;
431 }
432 
433 static void fimd_setup_trigger(struct fimd_context *ctx)
434 {
435 	void __iomem *timing_base = ctx->regs + ctx->driver_data->timing_base;
436 	u32 trg_type = ctx->driver_data->trg_type;
437 	u32 val = readl(timing_base + TRIGCON);
438 
439 	val &= ~(TRGMODE_ENABLE);
440 
441 	if (trg_type == I80_HW_TRG) {
442 		if (ctx->driver_data->has_hw_trigger)
443 			val |= HWTRGEN_ENABLE | HWTRGMASK_ENABLE;
444 		if (ctx->driver_data->has_trigger_per_te)
445 			val |= HWTRIGEN_PER_ENABLE;
446 	} else {
447 		val |= TRGMODE_ENABLE;
448 	}
449 
450 	writel(val, timing_base + TRIGCON);
451 }
452 
453 static void fimd_commit(struct exynos_drm_crtc *crtc)
454 {
455 	struct fimd_context *ctx = crtc->ctx;
456 	struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
457 	const struct fimd_driver_data *driver_data = ctx->driver_data;
458 	void *timing_base = ctx->regs + driver_data->timing_base;
459 	u32 val;
460 
461 	if (ctx->suspended)
462 		return;
463 
464 	/* nothing to do if we haven't set the mode yet */
465 	if (mode->htotal == 0 || mode->vtotal == 0)
466 		return;
467 
468 	if (ctx->i80_if) {
469 		val = ctx->i80ifcon | I80IFEN_ENABLE;
470 		writel(val, timing_base + I80IFCONFAx(0));
471 
472 		/* disable auto frame rate */
473 		writel(0, timing_base + I80IFCONFBx(0));
474 
475 		/* set video type selection to I80 interface */
476 		if (driver_data->has_vtsel && ctx->sysreg &&
477 				regmap_update_bits(ctx->sysreg,
478 					driver_data->lcdblk_offset,
479 					0x3 << driver_data->lcdblk_vt_shift,
480 					0x1 << driver_data->lcdblk_vt_shift)) {
481 			DRM_DEV_ERROR(ctx->dev,
482 				      "Failed to update sysreg for I80 i/f.\n");
483 			return;
484 		}
485 	} else {
486 		int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
487 		u32 vidcon1;
488 
489 		/* setup polarity values */
490 		vidcon1 = ctx->vidcon1;
491 		if (mode->flags & DRM_MODE_FLAG_NVSYNC)
492 			vidcon1 |= VIDCON1_INV_VSYNC;
493 		if (mode->flags & DRM_MODE_FLAG_NHSYNC)
494 			vidcon1 |= VIDCON1_INV_HSYNC;
495 		writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1);
496 
497 		/* setup vertical timing values. */
498 		vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
499 		vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
500 		vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
501 
502 		val = VIDTCON0_VBPD(vbpd - 1) |
503 			VIDTCON0_VFPD(vfpd - 1) |
504 			VIDTCON0_VSPW(vsync_len - 1);
505 		writel(val, ctx->regs + driver_data->timing_base + VIDTCON0);
506 
507 		/* setup horizontal timing values.  */
508 		hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
509 		hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
510 		hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
511 
512 		val = VIDTCON1_HBPD(hbpd - 1) |
513 			VIDTCON1_HFPD(hfpd - 1) |
514 			VIDTCON1_HSPW(hsync_len - 1);
515 		writel(val, ctx->regs + driver_data->timing_base + VIDTCON1);
516 	}
517 
518 	if (driver_data->has_vidoutcon)
519 		writel(ctx->vidout_con, timing_base + VIDOUT_CON);
520 
521 	/* set bypass selection */
522 	if (ctx->sysreg && regmap_update_bits(ctx->sysreg,
523 				driver_data->lcdblk_offset,
524 				0x1 << driver_data->lcdblk_bypass_shift,
525 				0x1 << driver_data->lcdblk_bypass_shift)) {
526 		DRM_DEV_ERROR(ctx->dev,
527 			      "Failed to update sysreg for bypass setting.\n");
528 		return;
529 	}
530 
531 	/* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
532 	 * bit should be cleared.
533 	 */
534 	if (driver_data->has_mic_bypass && ctx->sysreg &&
535 	    regmap_update_bits(ctx->sysreg,
536 				driver_data->lcdblk_offset,
537 				0x1 << driver_data->lcdblk_mic_bypass_shift,
538 				0x1 << driver_data->lcdblk_mic_bypass_shift)) {
539 		DRM_DEV_ERROR(ctx->dev,
540 			      "Failed to update sysreg for bypass mic.\n");
541 		return;
542 	}
543 
544 	/* setup horizontal and vertical display size. */
545 	val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
546 	       VIDTCON2_HOZVAL(mode->hdisplay - 1) |
547 	       VIDTCON2_LINEVAL_E(mode->vdisplay - 1) |
548 	       VIDTCON2_HOZVAL_E(mode->hdisplay - 1);
549 	writel(val, ctx->regs + driver_data->timing_base + VIDTCON2);
550 
551 	fimd_setup_trigger(ctx);
552 
553 	/*
554 	 * fields of register with prefix '_F' would be updated
555 	 * at vsync(same as dma start)
556 	 */
557 	val = ctx->vidcon0;
558 	val |= VIDCON0_ENVID | VIDCON0_ENVID_F;
559 
560 	if (ctx->driver_data->has_clksel)
561 		val |= VIDCON0_CLKSEL_LCD;
562 
563 	if (ctx->clkdiv > 1)
564 		val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR;
565 
566 	writel(val, ctx->regs + VIDCON0);
567 }
568 
569 static void fimd_win_set_bldeq(struct fimd_context *ctx, unsigned int win,
570 			       unsigned int alpha, unsigned int pixel_alpha)
571 {
572 	u32 mask = BLENDEQ_A_FUNC_F(0xf) | BLENDEQ_B_FUNC_F(0xf);
573 	u32 val = 0;
574 
575 	switch (pixel_alpha) {
576 	case DRM_MODE_BLEND_PIXEL_NONE:
577 	case DRM_MODE_BLEND_COVERAGE:
578 		val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA_A);
579 		val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
580 		break;
581 	case DRM_MODE_BLEND_PREMULTI:
582 	default:
583 		if (alpha != DRM_BLEND_ALPHA_OPAQUE) {
584 			val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA0);
585 			val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
586 		} else {
587 			val |= BLENDEQ_A_FUNC_F(BLENDEQ_ONE);
588 			val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
589 		}
590 		break;
591 	}
592 	fimd_set_bits(ctx, BLENDEQx(win), mask, val);
593 }
594 
595 static void fimd_win_set_bldmod(struct fimd_context *ctx, unsigned int win,
596 				unsigned int alpha, unsigned int pixel_alpha)
597 {
598 	u32 win_alpha_l = (alpha >> 8) & 0xf;
599 	u32 win_alpha_h = alpha >> 12;
600 	u32 val = 0;
601 
602 	switch (pixel_alpha) {
603 	case DRM_MODE_BLEND_PIXEL_NONE:
604 		break;
605 	case DRM_MODE_BLEND_COVERAGE:
606 	case DRM_MODE_BLEND_PREMULTI:
607 	default:
608 		val |= WINCON1_ALPHA_SEL;
609 		val |= WINCON1_BLD_PIX;
610 		val |= WINCON1_ALPHA_MUL;
611 		break;
612 	}
613 	fimd_set_bits(ctx, WINCON(win), WINCONx_BLEND_MODE_MASK, val);
614 
615 	/* OSD alpha */
616 	val = VIDISD14C_ALPHA0_R(win_alpha_h) |
617 		VIDISD14C_ALPHA0_G(win_alpha_h) |
618 		VIDISD14C_ALPHA0_B(win_alpha_h) |
619 		VIDISD14C_ALPHA1_R(0x0) |
620 		VIDISD14C_ALPHA1_G(0x0) |
621 		VIDISD14C_ALPHA1_B(0x0);
622 	writel(val, ctx->regs + VIDOSD_C(win));
623 
624 	val = VIDW_ALPHA_R(win_alpha_l) | VIDW_ALPHA_G(win_alpha_l) |
625 		VIDW_ALPHA_B(win_alpha_l);
626 	writel(val, ctx->regs + VIDWnALPHA0(win));
627 
628 	val = VIDW_ALPHA_R(0x0) | VIDW_ALPHA_G(0x0) |
629 		VIDW_ALPHA_B(0x0);
630 	writel(val, ctx->regs + VIDWnALPHA1(win));
631 
632 	fimd_set_bits(ctx, BLENDCON, BLENDCON_NEW_MASK,
633 			BLENDCON_NEW_8BIT_ALPHA_VALUE);
634 }
635 
636 static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
637 				struct drm_framebuffer *fb, int width)
638 {
639 	struct exynos_drm_plane plane = ctx->planes[win];
640 	struct exynos_drm_plane_state *state =
641 		to_exynos_plane_state(plane.base.state);
642 	uint32_t pixel_format = fb->format->format;
643 	unsigned int alpha = state->base.alpha;
644 	u32 val = WINCONx_ENWIN;
645 	unsigned int pixel_alpha;
646 
647 	if (fb->format->has_alpha)
648 		pixel_alpha = state->base.pixel_blend_mode;
649 	else
650 		pixel_alpha = DRM_MODE_BLEND_PIXEL_NONE;
651 
652 	/*
653 	 * In case of s3c64xx, window 0 doesn't support alpha channel.
654 	 * So the request format is ARGB8888 then change it to XRGB8888.
655 	 */
656 	if (ctx->driver_data->has_limited_fmt && !win) {
657 		if (pixel_format == DRM_FORMAT_ARGB8888)
658 			pixel_format = DRM_FORMAT_XRGB8888;
659 	}
660 
661 	switch (pixel_format) {
662 	case DRM_FORMAT_C8:
663 		val |= WINCON0_BPPMODE_8BPP_PALETTE;
664 		val |= WINCONx_BURSTLEN_8WORD;
665 		val |= WINCONx_BYTSWP;
666 		break;
667 	case DRM_FORMAT_XRGB1555:
668 		val |= WINCON0_BPPMODE_16BPP_1555;
669 		val |= WINCONx_HAWSWP;
670 		val |= WINCONx_BURSTLEN_16WORD;
671 		break;
672 	case DRM_FORMAT_RGB565:
673 		val |= WINCON0_BPPMODE_16BPP_565;
674 		val |= WINCONx_HAWSWP;
675 		val |= WINCONx_BURSTLEN_16WORD;
676 		break;
677 	case DRM_FORMAT_XRGB8888:
678 		val |= WINCON0_BPPMODE_24BPP_888;
679 		val |= WINCONx_WSWP;
680 		val |= WINCONx_BURSTLEN_16WORD;
681 		break;
682 	case DRM_FORMAT_ARGB8888:
683 	default:
684 		val |= WINCON1_BPPMODE_25BPP_A1888;
685 		val |= WINCONx_WSWP;
686 		val |= WINCONx_BURSTLEN_16WORD;
687 		break;
688 	}
689 
690 	/*
691 	 * Setting dma-burst to 16Word causes permanent tearing for very small
692 	 * buffers, e.g. cursor buffer. Burst Mode switching which based on
693 	 * plane size is not recommended as plane size varies alot towards the
694 	 * end of the screen and rapid movement causes unstable DMA, but it is
695 	 * still better to change dma-burst than displaying garbage.
696 	 */
697 
698 	if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
699 		val &= ~WINCONx_BURSTLEN_MASK;
700 		val |= WINCONx_BURSTLEN_4WORD;
701 	}
702 	fimd_set_bits(ctx, WINCON(win), ~WINCONx_BLEND_MODE_MASK, val);
703 
704 	/* hardware window 0 doesn't support alpha channel. */
705 	if (win != 0) {
706 		fimd_win_set_bldmod(ctx, win, alpha, pixel_alpha);
707 		fimd_win_set_bldeq(ctx, win, alpha, pixel_alpha);
708 	}
709 }
710 
711 static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win)
712 {
713 	unsigned int keycon0 = 0, keycon1 = 0;
714 
715 	keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
716 			WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
717 
718 	keycon1 = WxKEYCON1_COLVAL(0xffffffff);
719 
720 	writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
721 	writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
722 }
723 
724 /**
725  * shadow_protect_win() - disable updating values from shadow registers at vsync
726  *
727  * @win: window to protect registers for
728  * @protect: 1 to protect (disable updates)
729  */
730 static void fimd_shadow_protect_win(struct fimd_context *ctx,
731 				    unsigned int win, bool protect)
732 {
733 	u32 reg, bits, val;
734 
735 	/*
736 	 * SHADOWCON/PRTCON register is used for enabling timing.
737 	 *
738 	 * for example, once only width value of a register is set,
739 	 * if the dma is started then fimd hardware could malfunction so
740 	 * with protect window setting, the register fields with prefix '_F'
741 	 * wouldn't be updated at vsync also but updated once unprotect window
742 	 * is set.
743 	 */
744 
745 	if (ctx->driver_data->has_shadowcon) {
746 		reg = SHADOWCON;
747 		bits = SHADOWCON_WINx_PROTECT(win);
748 	} else {
749 		reg = PRTCON;
750 		bits = PRTCON_PROTECT;
751 	}
752 
753 	val = readl(ctx->regs + reg);
754 	if (protect)
755 		val |= bits;
756 	else
757 		val &= ~bits;
758 	writel(val, ctx->regs + reg);
759 }
760 
761 static void fimd_atomic_begin(struct exynos_drm_crtc *crtc)
762 {
763 	struct fimd_context *ctx = crtc->ctx;
764 	int i;
765 
766 	if (ctx->suspended)
767 		return;
768 
769 	for (i = 0; i < WINDOWS_NR; i++)
770 		fimd_shadow_protect_win(ctx, i, true);
771 }
772 
773 static void fimd_atomic_flush(struct exynos_drm_crtc *crtc)
774 {
775 	struct fimd_context *ctx = crtc->ctx;
776 	int i;
777 
778 	if (ctx->suspended)
779 		return;
780 
781 	for (i = 0; i < WINDOWS_NR; i++)
782 		fimd_shadow_protect_win(ctx, i, false);
783 
784 	exynos_crtc_handle_event(crtc);
785 }
786 
787 static void fimd_update_plane(struct exynos_drm_crtc *crtc,
788 			      struct exynos_drm_plane *plane)
789 {
790 	struct exynos_drm_plane_state *state =
791 				to_exynos_plane_state(plane->base.state);
792 	struct fimd_context *ctx = crtc->ctx;
793 	struct drm_framebuffer *fb = state->base.fb;
794 	dma_addr_t dma_addr;
795 	unsigned long val, size, offset;
796 	unsigned int last_x, last_y, buf_offsize, line_size;
797 	unsigned int win = plane->index;
798 	unsigned int cpp = fb->format->cpp[0];
799 	unsigned int pitch = fb->pitches[0];
800 
801 	if (ctx->suspended)
802 		return;
803 
804 	offset = state->src.x * cpp;
805 	offset += state->src.y * pitch;
806 
807 	/* buffer start address */
808 	dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset;
809 	val = (unsigned long)dma_addr;
810 	writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
811 
812 	/* buffer end address */
813 	size = pitch * state->crtc.h;
814 	val = (unsigned long)(dma_addr + size);
815 	writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
816 
817 	DRM_DEV_DEBUG_KMS(ctx->dev,
818 			  "start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
819 			  (unsigned long)dma_addr, val, size);
820 	DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n",
821 			  state->crtc.w, state->crtc.h);
822 
823 	/* buffer size */
824 	buf_offsize = pitch - (state->crtc.w * cpp);
825 	line_size = state->crtc.w * cpp;
826 	val = VIDW_BUF_SIZE_OFFSET(buf_offsize) |
827 		VIDW_BUF_SIZE_PAGEWIDTH(line_size) |
828 		VIDW_BUF_SIZE_OFFSET_E(buf_offsize) |
829 		VIDW_BUF_SIZE_PAGEWIDTH_E(line_size);
830 	writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0));
831 
832 	/* OSD position */
833 	val = VIDOSDxA_TOPLEFT_X(state->crtc.x) |
834 		VIDOSDxA_TOPLEFT_Y(state->crtc.y) |
835 		VIDOSDxA_TOPLEFT_X_E(state->crtc.x) |
836 		VIDOSDxA_TOPLEFT_Y_E(state->crtc.y);
837 	writel(val, ctx->regs + VIDOSD_A(win));
838 
839 	last_x = state->crtc.x + state->crtc.w;
840 	if (last_x)
841 		last_x--;
842 	last_y = state->crtc.y + state->crtc.h;
843 	if (last_y)
844 		last_y--;
845 
846 	val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) |
847 		VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y);
848 
849 	writel(val, ctx->regs + VIDOSD_B(win));
850 
851 	DRM_DEV_DEBUG_KMS(ctx->dev,
852 			  "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
853 			  state->crtc.x, state->crtc.y, last_x, last_y);
854 
855 	/* OSD size */
856 	if (win != 3 && win != 4) {
857 		u32 offset = VIDOSD_D(win);
858 		if (win == 0)
859 			offset = VIDOSD_C(win);
860 		val = state->crtc.w * state->crtc.h;
861 		writel(val, ctx->regs + offset);
862 
863 		DRM_DEV_DEBUG_KMS(ctx->dev, "osd size = 0x%x\n",
864 				  (unsigned int)val);
865 	}
866 
867 	fimd_win_set_pixfmt(ctx, win, fb, state->src.w);
868 
869 	/* hardware window 0 doesn't support color key. */
870 	if (win != 0)
871 		fimd_win_set_colkey(ctx, win);
872 
873 	fimd_enable_video_output(ctx, win, true);
874 
875 	if (ctx->driver_data->has_shadowcon)
876 		fimd_enable_shadow_channel_path(ctx, win, true);
877 
878 	if (ctx->i80_if)
879 		atomic_set(&ctx->win_updated, 1);
880 }
881 
882 static void fimd_disable_plane(struct exynos_drm_crtc *crtc,
883 			       struct exynos_drm_plane *plane)
884 {
885 	struct fimd_context *ctx = crtc->ctx;
886 	unsigned int win = plane->index;
887 
888 	if (ctx->suspended)
889 		return;
890 
891 	fimd_enable_video_output(ctx, win, false);
892 
893 	if (ctx->driver_data->has_shadowcon)
894 		fimd_enable_shadow_channel_path(ctx, win, false);
895 }
896 
897 static void fimd_atomic_enable(struct exynos_drm_crtc *crtc)
898 {
899 	struct fimd_context *ctx = crtc->ctx;
900 
901 	if (!ctx->suspended)
902 		return;
903 
904 	ctx->suspended = false;
905 
906 	pm_runtime_get_sync(ctx->dev);
907 
908 	/* if vblank was enabled status, enable it again. */
909 	if (test_and_clear_bit(0, &ctx->irq_flags))
910 		fimd_enable_vblank(ctx->crtc);
911 
912 	fimd_commit(ctx->crtc);
913 }
914 
915 static void fimd_atomic_disable(struct exynos_drm_crtc *crtc)
916 {
917 	struct fimd_context *ctx = crtc->ctx;
918 	int i;
919 
920 	if (ctx->suspended)
921 		return;
922 
923 	/*
924 	 * We need to make sure that all windows are disabled before we
925 	 * suspend that connector. Otherwise we might try to scan from
926 	 * a destroyed buffer later.
927 	 */
928 	for (i = 0; i < WINDOWS_NR; i++)
929 		fimd_disable_plane(crtc, &ctx->planes[i]);
930 
931 	fimd_enable_vblank(crtc);
932 	fimd_wait_for_vblank(crtc);
933 	fimd_disable_vblank(crtc);
934 
935 	writel(0, ctx->regs + VIDCON0);
936 
937 	pm_runtime_put_sync(ctx->dev);
938 	ctx->suspended = true;
939 }
940 
941 static void fimd_trigger(struct device *dev)
942 {
943 	struct fimd_context *ctx = dev_get_drvdata(dev);
944 	const struct fimd_driver_data *driver_data = ctx->driver_data;
945 	void *timing_base = ctx->regs + driver_data->timing_base;
946 	u32 reg;
947 
948 	 /*
949 	  * Skips triggering if in triggering state, because multiple triggering
950 	  * requests can cause panel reset.
951 	  */
952 	if (atomic_read(&ctx->triggering))
953 		return;
954 
955 	/* Enters triggering mode */
956 	atomic_set(&ctx->triggering, 1);
957 
958 	reg = readl(timing_base + TRIGCON);
959 	reg |= (TRGMODE_ENABLE | SWTRGCMD_ENABLE);
960 	writel(reg, timing_base + TRIGCON);
961 
962 	/*
963 	 * Exits triggering mode if vblank is not enabled yet, because when the
964 	 * VIDINTCON0 register is not set, it can not exit from triggering mode.
965 	 */
966 	if (!test_bit(0, &ctx->irq_flags))
967 		atomic_set(&ctx->triggering, 0);
968 }
969 
970 static void fimd_te_handler(struct exynos_drm_crtc *crtc)
971 {
972 	struct fimd_context *ctx = crtc->ctx;
973 	u32 trg_type = ctx->driver_data->trg_type;
974 
975 	/* Checks the crtc is detached already from encoder */
976 	if (!ctx->drm_dev)
977 		return;
978 
979 	if (trg_type == I80_HW_TRG)
980 		goto out;
981 
982 	/*
983 	 * If there is a page flip request, triggers and handles the page flip
984 	 * event so that current fb can be updated into panel GRAM.
985 	 */
986 	if (atomic_add_unless(&ctx->win_updated, -1, 0))
987 		fimd_trigger(ctx->dev);
988 
989 out:
990 	/* Wakes up vsync event queue */
991 	if (atomic_read(&ctx->wait_vsync_event)) {
992 		atomic_set(&ctx->wait_vsync_event, 0);
993 		wake_up(&ctx->wait_vsync_queue);
994 	}
995 
996 	if (test_bit(0, &ctx->irq_flags))
997 		drm_crtc_handle_vblank(&ctx->crtc->base);
998 }
999 
1000 static void fimd_dp_clock_enable(struct exynos_drm_clk *clk, bool enable)
1001 {
1002 	struct fimd_context *ctx = container_of(clk, struct fimd_context,
1003 						dp_clk);
1004 	u32 val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;
1005 	writel(val, ctx->regs + DP_MIE_CLKCON);
1006 }
1007 
1008 static const struct exynos_drm_crtc_ops fimd_crtc_ops = {
1009 	.atomic_enable = fimd_atomic_enable,
1010 	.atomic_disable = fimd_atomic_disable,
1011 	.enable_vblank = fimd_enable_vblank,
1012 	.disable_vblank = fimd_disable_vblank,
1013 	.atomic_begin = fimd_atomic_begin,
1014 	.update_plane = fimd_update_plane,
1015 	.disable_plane = fimd_disable_plane,
1016 	.atomic_flush = fimd_atomic_flush,
1017 	.atomic_check = fimd_atomic_check,
1018 	.te_handler = fimd_te_handler,
1019 };
1020 
1021 static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
1022 {
1023 	struct fimd_context *ctx = (struct fimd_context *)dev_id;
1024 	u32 val, clear_bit;
1025 
1026 	val = readl(ctx->regs + VIDINTCON1);
1027 
1028 	clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
1029 	if (val & clear_bit)
1030 		writel(clear_bit, ctx->regs + VIDINTCON1);
1031 
1032 	/* check the crtc is detached already from encoder */
1033 	if (!ctx->drm_dev)
1034 		goto out;
1035 
1036 	if (!ctx->i80_if)
1037 		drm_crtc_handle_vblank(&ctx->crtc->base);
1038 
1039 	if (ctx->i80_if) {
1040 		/* Exits triggering mode */
1041 		atomic_set(&ctx->triggering, 0);
1042 	} else {
1043 		/* set wait vsync event to zero and wake up queue. */
1044 		if (atomic_read(&ctx->wait_vsync_event)) {
1045 			atomic_set(&ctx->wait_vsync_event, 0);
1046 			wake_up(&ctx->wait_vsync_queue);
1047 		}
1048 	}
1049 
1050 out:
1051 	return IRQ_HANDLED;
1052 }
1053 
1054 static int fimd_bind(struct device *dev, struct device *master, void *data)
1055 {
1056 	struct fimd_context *ctx = dev_get_drvdata(dev);
1057 	struct drm_device *drm_dev = data;
1058 	struct exynos_drm_plane *exynos_plane;
1059 	unsigned int i;
1060 	int ret;
1061 
1062 	ctx->drm_dev = drm_dev;
1063 
1064 	for (i = 0; i < WINDOWS_NR; i++) {
1065 		ctx->configs[i].pixel_formats = fimd_formats;
1066 		ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats);
1067 		ctx->configs[i].zpos = i;
1068 		ctx->configs[i].type = fimd_win_types[i];
1069 		ctx->configs[i].capabilities = capabilities[i];
1070 		ret = exynos_plane_init(drm_dev, &ctx->planes[i], i,
1071 					&ctx->configs[i]);
1072 		if (ret)
1073 			return ret;
1074 	}
1075 
1076 	exynos_plane = &ctx->planes[DEFAULT_WIN];
1077 	ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
1078 			EXYNOS_DISPLAY_TYPE_LCD, &fimd_crtc_ops, ctx);
1079 	if (IS_ERR(ctx->crtc))
1080 		return PTR_ERR(ctx->crtc);
1081 
1082 	if (ctx->driver_data->has_dp_clk) {
1083 		ctx->dp_clk.enable = fimd_dp_clock_enable;
1084 		ctx->crtc->pipe_clk = &ctx->dp_clk;
1085 	}
1086 
1087 	if (ctx->encoder)
1088 		exynos_dpi_bind(drm_dev, ctx->encoder);
1089 
1090 	if (is_drm_iommu_supported(drm_dev))
1091 		fimd_clear_channels(ctx->crtc);
1092 
1093 	return exynos_drm_register_dma(drm_dev, dev);
1094 }
1095 
1096 static void fimd_unbind(struct device *dev, struct device *master,
1097 			void *data)
1098 {
1099 	struct fimd_context *ctx = dev_get_drvdata(dev);
1100 
1101 	fimd_atomic_disable(ctx->crtc);
1102 
1103 	exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev);
1104 
1105 	if (ctx->encoder)
1106 		exynos_dpi_remove(ctx->encoder);
1107 }
1108 
1109 static const struct component_ops fimd_component_ops = {
1110 	.bind	= fimd_bind,
1111 	.unbind = fimd_unbind,
1112 };
1113 
1114 static int fimd_probe(struct platform_device *pdev)
1115 {
1116 	struct device *dev = &pdev->dev;
1117 	struct fimd_context *ctx;
1118 	struct device_node *i80_if_timings;
1119 	struct resource *res;
1120 	int ret;
1121 
1122 	if (!dev->of_node)
1123 		return -ENODEV;
1124 
1125 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
1126 	if (!ctx)
1127 		return -ENOMEM;
1128 
1129 	ctx->dev = dev;
1130 	ctx->suspended = true;
1131 	ctx->driver_data = of_device_get_match_data(dev);
1132 
1133 	if (of_property_read_bool(dev->of_node, "samsung,invert-vden"))
1134 		ctx->vidcon1 |= VIDCON1_INV_VDEN;
1135 	if (of_property_read_bool(dev->of_node, "samsung,invert-vclk"))
1136 		ctx->vidcon1 |= VIDCON1_INV_VCLK;
1137 
1138 	i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
1139 	if (i80_if_timings) {
1140 		u32 val;
1141 
1142 		ctx->i80_if = true;
1143 
1144 		if (ctx->driver_data->has_vidoutcon)
1145 			ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0;
1146 		else
1147 			ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0;
1148 		/*
1149 		 * The user manual describes that this "DSI_EN" bit is required
1150 		 * to enable I80 24-bit data interface.
1151 		 */
1152 		ctx->vidcon0 |= VIDCON0_DSI_EN;
1153 
1154 		if (of_property_read_u32(i80_if_timings, "cs-setup", &val))
1155 			val = 0;
1156 		ctx->i80ifcon = LCD_CS_SETUP(val);
1157 		if (of_property_read_u32(i80_if_timings, "wr-setup", &val))
1158 			val = 0;
1159 		ctx->i80ifcon |= LCD_WR_SETUP(val);
1160 		if (of_property_read_u32(i80_if_timings, "wr-active", &val))
1161 			val = 1;
1162 		ctx->i80ifcon |= LCD_WR_ACTIVE(val);
1163 		if (of_property_read_u32(i80_if_timings, "wr-hold", &val))
1164 			val = 0;
1165 		ctx->i80ifcon |= LCD_WR_HOLD(val);
1166 	}
1167 	of_node_put(i80_if_timings);
1168 
1169 	ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
1170 							"samsung,sysreg");
1171 	if (IS_ERR(ctx->sysreg)) {
1172 		dev_warn(dev, "failed to get system register.\n");
1173 		ctx->sysreg = NULL;
1174 	}
1175 
1176 	ctx->bus_clk = devm_clk_get(dev, "fimd");
1177 	if (IS_ERR(ctx->bus_clk)) {
1178 		dev_err(dev, "failed to get bus clock\n");
1179 		return PTR_ERR(ctx->bus_clk);
1180 	}
1181 
1182 	ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd");
1183 	if (IS_ERR(ctx->lcd_clk)) {
1184 		dev_err(dev, "failed to get lcd clock\n");
1185 		return PTR_ERR(ctx->lcd_clk);
1186 	}
1187 
1188 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1189 
1190 	ctx->regs = devm_ioremap_resource(dev, res);
1191 	if (IS_ERR(ctx->regs))
1192 		return PTR_ERR(ctx->regs);
1193 
1194 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
1195 					   ctx->i80_if ? "lcd_sys" : "vsync");
1196 	if (!res) {
1197 		dev_err(dev, "irq request failed.\n");
1198 		return -ENXIO;
1199 	}
1200 
1201 	ret = devm_request_irq(dev, res->start, fimd_irq_handler,
1202 							0, "drm_fimd", ctx);
1203 	if (ret) {
1204 		dev_err(dev, "irq request failed.\n");
1205 		return ret;
1206 	}
1207 
1208 	init_waitqueue_head(&ctx->wait_vsync_queue);
1209 	atomic_set(&ctx->wait_vsync_event, 0);
1210 
1211 	platform_set_drvdata(pdev, ctx);
1212 
1213 	ctx->encoder = exynos_dpi_probe(dev);
1214 	if (IS_ERR(ctx->encoder))
1215 		return PTR_ERR(ctx->encoder);
1216 
1217 	pm_runtime_enable(dev);
1218 
1219 	ret = component_add(dev, &fimd_component_ops);
1220 	if (ret)
1221 		goto err_disable_pm_runtime;
1222 
1223 	return ret;
1224 
1225 err_disable_pm_runtime:
1226 	pm_runtime_disable(dev);
1227 
1228 	return ret;
1229 }
1230 
1231 static int fimd_remove(struct platform_device *pdev)
1232 {
1233 	pm_runtime_disable(&pdev->dev);
1234 
1235 	component_del(&pdev->dev, &fimd_component_ops);
1236 
1237 	return 0;
1238 }
1239 
1240 #ifdef CONFIG_PM
1241 static int exynos_fimd_suspend(struct device *dev)
1242 {
1243 	struct fimd_context *ctx = dev_get_drvdata(dev);
1244 
1245 	clk_disable_unprepare(ctx->lcd_clk);
1246 	clk_disable_unprepare(ctx->bus_clk);
1247 
1248 	return 0;
1249 }
1250 
1251 static int exynos_fimd_resume(struct device *dev)
1252 {
1253 	struct fimd_context *ctx = dev_get_drvdata(dev);
1254 	int ret;
1255 
1256 	ret = clk_prepare_enable(ctx->bus_clk);
1257 	if (ret < 0) {
1258 		DRM_DEV_ERROR(dev,
1259 			      "Failed to prepare_enable the bus clk [%d]\n",
1260 			      ret);
1261 		return ret;
1262 	}
1263 
1264 	ret = clk_prepare_enable(ctx->lcd_clk);
1265 	if  (ret < 0) {
1266 		DRM_DEV_ERROR(dev,
1267 			      "Failed to prepare_enable the lcd clk [%d]\n",
1268 			      ret);
1269 		return ret;
1270 	}
1271 
1272 	return 0;
1273 }
1274 #endif
1275 
1276 static const struct dev_pm_ops exynos_fimd_pm_ops = {
1277 	SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL)
1278 	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
1279 				pm_runtime_force_resume)
1280 };
1281 
1282 struct platform_driver fimd_driver = {
1283 	.probe		= fimd_probe,
1284 	.remove		= fimd_remove,
1285 	.driver		= {
1286 		.name	= "exynos4-fb",
1287 		.owner	= THIS_MODULE,
1288 		.pm	= &exynos_fimd_pm_ops,
1289 		.of_match_table = fimd_driver_dt_match,
1290 	},
1291 };
1292