1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* exynos_drm_fimd.c 3 * 4 * Copyright (C) 2011 Samsung Electronics Co.Ltd 5 * Authors: 6 * Joonyoung Shim <jy0922.shim@samsung.com> 7 * Inki Dae <inki.dae@samsung.com> 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/component.h> 12 #include <linux/kernel.h> 13 #include <linux/mfd/syscon.h> 14 #include <linux/of.h> 15 #include <linux/of_device.h> 16 #include <linux/platform_device.h> 17 #include <linux/pm_runtime.h> 18 #include <linux/regmap.h> 19 20 #include <video/of_display_timing.h> 21 #include <video/of_videomode.h> 22 #include <video/samsung_fimd.h> 23 24 #include <drm/drm_fourcc.h> 25 #include <drm/drm_vblank.h> 26 #include <drm/exynos_drm.h> 27 28 #include "exynos_drm_crtc.h" 29 #include "exynos_drm_drv.h" 30 #include "exynos_drm_fb.h" 31 #include "exynos_drm_plane.h" 32 33 /* 34 * FIMD stands for Fully Interactive Mobile Display and 35 * as a display controller, it transfers contents drawn on memory 36 * to a LCD Panel through Display Interfaces such as RGB or 37 * CPU Interface. 38 */ 39 40 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 41 42 /* position control register for hardware window 0, 2 ~ 4.*/ 43 #define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16) 44 #define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16) 45 /* 46 * size control register for hardware windows 0 and alpha control register 47 * for hardware windows 1 ~ 4 48 */ 49 #define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16) 50 /* size control register for hardware windows 1 ~ 2. */ 51 #define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16) 52 53 #define VIDWnALPHA0(win) (VIDW_ALPHA + 0x00 + (win) * 8) 54 #define VIDWnALPHA1(win) (VIDW_ALPHA + 0x04 + (win) * 8) 55 56 #define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8) 57 #define VIDWx_BUF_START_S(win, buf) (VIDW_BUF_START_S(buf) + (win) * 8) 58 #define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8) 59 #define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4) 60 61 /* color key control register for hardware window 1 ~ 4. */ 62 #define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8)) 63 /* color key value register for hardware window 1 ~ 4. */ 64 #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8)) 65 66 /* I80 trigger control register */ 67 #define TRIGCON 0x1A4 68 #define TRGMODE_ENABLE (1 << 0) 69 #define SWTRGCMD_ENABLE (1 << 1) 70 /* Exynos3250, 3472, 5260 5410, 5420 and 5422 only supported. */ 71 #define HWTRGEN_ENABLE (1 << 3) 72 #define HWTRGMASK_ENABLE (1 << 4) 73 /* Exynos3250, 3472, 5260, 5420 and 5422 only supported. */ 74 #define HWTRIGEN_PER_ENABLE (1 << 31) 75 76 /* display mode change control register except exynos4 */ 77 #define VIDOUT_CON 0x000 78 #define VIDOUT_CON_F_I80_LDI0 (0x2 << 8) 79 80 /* I80 interface control for main LDI register */ 81 #define I80IFCONFAx(x) (0x1B0 + (x) * 4) 82 #define I80IFCONFBx(x) (0x1B8 + (x) * 4) 83 #define LCD_CS_SETUP(x) ((x) << 16) 84 #define LCD_WR_SETUP(x) ((x) << 12) 85 #define LCD_WR_ACTIVE(x) ((x) << 8) 86 #define LCD_WR_HOLD(x) ((x) << 4) 87 #define I80IFEN_ENABLE (1 << 0) 88 89 /* FIMD has totally five hardware windows. */ 90 #define WINDOWS_NR 5 91 92 /* HW trigger flag on i80 panel. */ 93 #define I80_HW_TRG (1 << 1) 94 95 struct fimd_driver_data { 96 unsigned int timing_base; 97 unsigned int lcdblk_offset; 98 unsigned int lcdblk_vt_shift; 99 unsigned int lcdblk_bypass_shift; 100 unsigned int lcdblk_mic_bypass_shift; 101 unsigned int trg_type; 102 103 unsigned int has_shadowcon:1; 104 unsigned int has_clksel:1; 105 unsigned int has_limited_fmt:1; 106 unsigned int has_vidoutcon:1; 107 unsigned int has_vtsel:1; 108 unsigned int has_mic_bypass:1; 109 unsigned int has_dp_clk:1; 110 unsigned int has_hw_trigger:1; 111 unsigned int has_trigger_per_te:1; 112 }; 113 114 static struct fimd_driver_data s3c64xx_fimd_driver_data = { 115 .timing_base = 0x0, 116 .has_clksel = 1, 117 .has_limited_fmt = 1, 118 }; 119 120 static struct fimd_driver_data s5pv210_fimd_driver_data = { 121 .timing_base = 0x0, 122 .has_shadowcon = 1, 123 .has_clksel = 1, 124 }; 125 126 static struct fimd_driver_data exynos3_fimd_driver_data = { 127 .timing_base = 0x20000, 128 .lcdblk_offset = 0x210, 129 .lcdblk_bypass_shift = 1, 130 .has_shadowcon = 1, 131 .has_vidoutcon = 1, 132 }; 133 134 static struct fimd_driver_data exynos4_fimd_driver_data = { 135 .timing_base = 0x0, 136 .lcdblk_offset = 0x210, 137 .lcdblk_vt_shift = 10, 138 .lcdblk_bypass_shift = 1, 139 .has_shadowcon = 1, 140 .has_vtsel = 1, 141 }; 142 143 static struct fimd_driver_data exynos5_fimd_driver_data = { 144 .timing_base = 0x20000, 145 .lcdblk_offset = 0x214, 146 .lcdblk_vt_shift = 24, 147 .lcdblk_bypass_shift = 15, 148 .has_shadowcon = 1, 149 .has_vidoutcon = 1, 150 .has_vtsel = 1, 151 .has_dp_clk = 1, 152 }; 153 154 static struct fimd_driver_data exynos5420_fimd_driver_data = { 155 .timing_base = 0x20000, 156 .lcdblk_offset = 0x214, 157 .lcdblk_vt_shift = 24, 158 .lcdblk_bypass_shift = 15, 159 .lcdblk_mic_bypass_shift = 11, 160 .has_shadowcon = 1, 161 .has_vidoutcon = 1, 162 .has_vtsel = 1, 163 .has_mic_bypass = 1, 164 .has_dp_clk = 1, 165 }; 166 167 struct fimd_context { 168 struct device *dev; 169 struct drm_device *drm_dev; 170 void *dma_priv; 171 struct exynos_drm_crtc *crtc; 172 struct exynos_drm_plane planes[WINDOWS_NR]; 173 struct exynos_drm_plane_config configs[WINDOWS_NR]; 174 struct clk *bus_clk; 175 struct clk *lcd_clk; 176 void __iomem *regs; 177 struct regmap *sysreg; 178 unsigned long irq_flags; 179 u32 vidcon0; 180 u32 vidcon1; 181 u32 vidout_con; 182 u32 i80ifcon; 183 bool i80_if; 184 bool suspended; 185 wait_queue_head_t wait_vsync_queue; 186 atomic_t wait_vsync_event; 187 atomic_t win_updated; 188 atomic_t triggering; 189 u32 clkdiv; 190 191 const struct fimd_driver_data *driver_data; 192 struct drm_encoder *encoder; 193 struct exynos_drm_clk dp_clk; 194 }; 195 196 static const struct of_device_id fimd_driver_dt_match[] = { 197 { .compatible = "samsung,s3c6400-fimd", 198 .data = &s3c64xx_fimd_driver_data }, 199 { .compatible = "samsung,s5pv210-fimd", 200 .data = &s5pv210_fimd_driver_data }, 201 { .compatible = "samsung,exynos3250-fimd", 202 .data = &exynos3_fimd_driver_data }, 203 { .compatible = "samsung,exynos4210-fimd", 204 .data = &exynos4_fimd_driver_data }, 205 { .compatible = "samsung,exynos5250-fimd", 206 .data = &exynos5_fimd_driver_data }, 207 { .compatible = "samsung,exynos5420-fimd", 208 .data = &exynos5420_fimd_driver_data }, 209 {}, 210 }; 211 MODULE_DEVICE_TABLE(of, fimd_driver_dt_match); 212 213 static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = { 214 DRM_PLANE_TYPE_PRIMARY, 215 DRM_PLANE_TYPE_OVERLAY, 216 DRM_PLANE_TYPE_OVERLAY, 217 DRM_PLANE_TYPE_OVERLAY, 218 DRM_PLANE_TYPE_CURSOR, 219 }; 220 221 static const uint32_t fimd_formats[] = { 222 DRM_FORMAT_C8, 223 DRM_FORMAT_XRGB1555, 224 DRM_FORMAT_RGB565, 225 DRM_FORMAT_XRGB8888, 226 DRM_FORMAT_ARGB8888, 227 }; 228 229 static const unsigned int capabilities[WINDOWS_NR] = { 230 0, 231 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 232 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 233 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 234 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, 235 }; 236 237 static inline void fimd_set_bits(struct fimd_context *ctx, u32 reg, u32 mask, 238 u32 val) 239 { 240 val = (val & mask) | (readl(ctx->regs + reg) & ~mask); 241 writel(val, ctx->regs + reg); 242 } 243 244 static int fimd_enable_vblank(struct exynos_drm_crtc *crtc) 245 { 246 struct fimd_context *ctx = crtc->ctx; 247 u32 val; 248 249 if (ctx->suspended) 250 return -EPERM; 251 252 if (!test_and_set_bit(0, &ctx->irq_flags)) { 253 val = readl(ctx->regs + VIDINTCON0); 254 255 val |= VIDINTCON0_INT_ENABLE; 256 257 if (ctx->i80_if) { 258 val |= VIDINTCON0_INT_I80IFDONE; 259 val |= VIDINTCON0_INT_SYSMAINCON; 260 val &= ~VIDINTCON0_INT_SYSSUBCON; 261 } else { 262 val |= VIDINTCON0_INT_FRAME; 263 264 val &= ~VIDINTCON0_FRAMESEL0_MASK; 265 val |= VIDINTCON0_FRAMESEL0_FRONTPORCH; 266 val &= ~VIDINTCON0_FRAMESEL1_MASK; 267 val |= VIDINTCON0_FRAMESEL1_NONE; 268 } 269 270 writel(val, ctx->regs + VIDINTCON0); 271 } 272 273 return 0; 274 } 275 276 static void fimd_disable_vblank(struct exynos_drm_crtc *crtc) 277 { 278 struct fimd_context *ctx = crtc->ctx; 279 u32 val; 280 281 if (ctx->suspended) 282 return; 283 284 if (test_and_clear_bit(0, &ctx->irq_flags)) { 285 val = readl(ctx->regs + VIDINTCON0); 286 287 val &= ~VIDINTCON0_INT_ENABLE; 288 289 if (ctx->i80_if) { 290 val &= ~VIDINTCON0_INT_I80IFDONE; 291 val &= ~VIDINTCON0_INT_SYSMAINCON; 292 val &= ~VIDINTCON0_INT_SYSSUBCON; 293 } else 294 val &= ~VIDINTCON0_INT_FRAME; 295 296 writel(val, ctx->regs + VIDINTCON0); 297 } 298 } 299 300 static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc) 301 { 302 struct fimd_context *ctx = crtc->ctx; 303 304 if (ctx->suspended) 305 return; 306 307 atomic_set(&ctx->wait_vsync_event, 1); 308 309 /* 310 * wait for FIMD to signal VSYNC interrupt or return after 311 * timeout which is set to 50ms (refresh rate of 20). 312 */ 313 if (!wait_event_timeout(ctx->wait_vsync_queue, 314 !atomic_read(&ctx->wait_vsync_event), 315 HZ/20)) 316 DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n"); 317 } 318 319 static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win, 320 bool enable) 321 { 322 u32 val = readl(ctx->regs + WINCON(win)); 323 324 if (enable) 325 val |= WINCONx_ENWIN; 326 else 327 val &= ~WINCONx_ENWIN; 328 329 writel(val, ctx->regs + WINCON(win)); 330 } 331 332 static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, 333 unsigned int win, 334 bool enable) 335 { 336 u32 val = readl(ctx->regs + SHADOWCON); 337 338 if (enable) 339 val |= SHADOWCON_CHx_ENABLE(win); 340 else 341 val &= ~SHADOWCON_CHx_ENABLE(win); 342 343 writel(val, ctx->regs + SHADOWCON); 344 } 345 346 static int fimd_clear_channels(struct exynos_drm_crtc *crtc) 347 { 348 struct fimd_context *ctx = crtc->ctx; 349 unsigned int win, ch_enabled = 0; 350 int ret; 351 352 /* Hardware is in unknown state, so ensure it gets enabled properly */ 353 ret = pm_runtime_resume_and_get(ctx->dev); 354 if (ret < 0) { 355 dev_err(ctx->dev, "failed to enable FIMD device.\n"); 356 return ret; 357 } 358 359 clk_prepare_enable(ctx->bus_clk); 360 clk_prepare_enable(ctx->lcd_clk); 361 362 /* Check if any channel is enabled. */ 363 for (win = 0; win < WINDOWS_NR; win++) { 364 u32 val = readl(ctx->regs + WINCON(win)); 365 366 if (val & WINCONx_ENWIN) { 367 fimd_enable_video_output(ctx, win, false); 368 369 if (ctx->driver_data->has_shadowcon) 370 fimd_enable_shadow_channel_path(ctx, win, 371 false); 372 373 ch_enabled = 1; 374 } 375 } 376 377 /* Wait for vsync, as disable channel takes effect at next vsync */ 378 if (ch_enabled) { 379 ctx->suspended = false; 380 381 fimd_enable_vblank(ctx->crtc); 382 fimd_wait_for_vblank(ctx->crtc); 383 fimd_disable_vblank(ctx->crtc); 384 385 ctx->suspended = true; 386 } 387 388 clk_disable_unprepare(ctx->lcd_clk); 389 clk_disable_unprepare(ctx->bus_clk); 390 391 pm_runtime_put(ctx->dev); 392 393 return 0; 394 } 395 396 397 static int fimd_atomic_check(struct exynos_drm_crtc *crtc, 398 struct drm_crtc_state *state) 399 { 400 struct drm_display_mode *mode = &state->adjusted_mode; 401 struct fimd_context *ctx = crtc->ctx; 402 unsigned long ideal_clk, lcd_rate; 403 u32 clkdiv; 404 405 if (mode->clock == 0) { 406 DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n"); 407 return -EINVAL; 408 } 409 410 ideal_clk = mode->clock * 1000; 411 412 if (ctx->i80_if) { 413 /* 414 * The frame done interrupt should be occurred prior to the 415 * next TE signal. 416 */ 417 ideal_clk *= 2; 418 } 419 420 lcd_rate = clk_get_rate(ctx->lcd_clk); 421 if (2 * lcd_rate < ideal_clk) { 422 DRM_DEV_ERROR(ctx->dev, 423 "sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n", 424 lcd_rate, ideal_clk); 425 return -EINVAL; 426 } 427 428 /* Find the clock divider value that gets us closest to ideal_clk */ 429 clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk); 430 if (clkdiv >= 0x200) { 431 DRM_DEV_ERROR(ctx->dev, "requested pixel clock(%lu) too low\n", 432 ideal_clk); 433 return -EINVAL; 434 } 435 436 ctx->clkdiv = (clkdiv < 0x100) ? clkdiv : 0xff; 437 438 return 0; 439 } 440 441 static void fimd_setup_trigger(struct fimd_context *ctx) 442 { 443 void __iomem *timing_base = ctx->regs + ctx->driver_data->timing_base; 444 u32 trg_type = ctx->driver_data->trg_type; 445 u32 val = readl(timing_base + TRIGCON); 446 447 val &= ~(TRGMODE_ENABLE); 448 449 if (trg_type == I80_HW_TRG) { 450 if (ctx->driver_data->has_hw_trigger) 451 val |= HWTRGEN_ENABLE | HWTRGMASK_ENABLE; 452 if (ctx->driver_data->has_trigger_per_te) 453 val |= HWTRIGEN_PER_ENABLE; 454 } else { 455 val |= TRGMODE_ENABLE; 456 } 457 458 writel(val, timing_base + TRIGCON); 459 } 460 461 static void fimd_commit(struct exynos_drm_crtc *crtc) 462 { 463 struct fimd_context *ctx = crtc->ctx; 464 struct drm_display_mode *mode = &crtc->base.state->adjusted_mode; 465 const struct fimd_driver_data *driver_data = ctx->driver_data; 466 void *timing_base = ctx->regs + driver_data->timing_base; 467 u32 val; 468 469 if (ctx->suspended) 470 return; 471 472 /* nothing to do if we haven't set the mode yet */ 473 if (mode->htotal == 0 || mode->vtotal == 0) 474 return; 475 476 if (ctx->i80_if) { 477 val = ctx->i80ifcon | I80IFEN_ENABLE; 478 writel(val, timing_base + I80IFCONFAx(0)); 479 480 /* disable auto frame rate */ 481 writel(0, timing_base + I80IFCONFBx(0)); 482 483 /* set video type selection to I80 interface */ 484 if (driver_data->has_vtsel && ctx->sysreg && 485 regmap_update_bits(ctx->sysreg, 486 driver_data->lcdblk_offset, 487 0x3 << driver_data->lcdblk_vt_shift, 488 0x1 << driver_data->lcdblk_vt_shift)) { 489 DRM_DEV_ERROR(ctx->dev, 490 "Failed to update sysreg for I80 i/f.\n"); 491 return; 492 } 493 } else { 494 int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd; 495 u32 vidcon1; 496 497 /* setup polarity values */ 498 vidcon1 = ctx->vidcon1; 499 if (mode->flags & DRM_MODE_FLAG_NVSYNC) 500 vidcon1 |= VIDCON1_INV_VSYNC; 501 if (mode->flags & DRM_MODE_FLAG_NHSYNC) 502 vidcon1 |= VIDCON1_INV_HSYNC; 503 writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1); 504 505 /* setup vertical timing values. */ 506 vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; 507 vbpd = mode->crtc_vtotal - mode->crtc_vsync_end; 508 vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay; 509 510 val = VIDTCON0_VBPD(vbpd - 1) | 511 VIDTCON0_VFPD(vfpd - 1) | 512 VIDTCON0_VSPW(vsync_len - 1); 513 writel(val, ctx->regs + driver_data->timing_base + VIDTCON0); 514 515 /* setup horizontal timing values. */ 516 hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; 517 hbpd = mode->crtc_htotal - mode->crtc_hsync_end; 518 hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay; 519 520 val = VIDTCON1_HBPD(hbpd - 1) | 521 VIDTCON1_HFPD(hfpd - 1) | 522 VIDTCON1_HSPW(hsync_len - 1); 523 writel(val, ctx->regs + driver_data->timing_base + VIDTCON1); 524 } 525 526 if (driver_data->has_vidoutcon) 527 writel(ctx->vidout_con, timing_base + VIDOUT_CON); 528 529 /* set bypass selection */ 530 if (ctx->sysreg && regmap_update_bits(ctx->sysreg, 531 driver_data->lcdblk_offset, 532 0x1 << driver_data->lcdblk_bypass_shift, 533 0x1 << driver_data->lcdblk_bypass_shift)) { 534 DRM_DEV_ERROR(ctx->dev, 535 "Failed to update sysreg for bypass setting.\n"); 536 return; 537 } 538 539 /* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass 540 * bit should be cleared. 541 */ 542 if (driver_data->has_mic_bypass && ctx->sysreg && 543 regmap_update_bits(ctx->sysreg, 544 driver_data->lcdblk_offset, 545 0x1 << driver_data->lcdblk_mic_bypass_shift, 546 0x1 << driver_data->lcdblk_mic_bypass_shift)) { 547 DRM_DEV_ERROR(ctx->dev, 548 "Failed to update sysreg for bypass mic.\n"); 549 return; 550 } 551 552 /* setup horizontal and vertical display size. */ 553 val = VIDTCON2_LINEVAL(mode->vdisplay - 1) | 554 VIDTCON2_HOZVAL(mode->hdisplay - 1) | 555 VIDTCON2_LINEVAL_E(mode->vdisplay - 1) | 556 VIDTCON2_HOZVAL_E(mode->hdisplay - 1); 557 writel(val, ctx->regs + driver_data->timing_base + VIDTCON2); 558 559 fimd_setup_trigger(ctx); 560 561 /* 562 * fields of register with prefix '_F' would be updated 563 * at vsync(same as dma start) 564 */ 565 val = ctx->vidcon0; 566 val |= VIDCON0_ENVID | VIDCON0_ENVID_F; 567 568 if (ctx->driver_data->has_clksel) 569 val |= VIDCON0_CLKSEL_LCD; 570 571 if (ctx->clkdiv > 1) 572 val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR; 573 574 writel(val, ctx->regs + VIDCON0); 575 } 576 577 static void fimd_win_set_bldeq(struct fimd_context *ctx, unsigned int win, 578 unsigned int alpha, unsigned int pixel_alpha) 579 { 580 u32 mask = BLENDEQ_A_FUNC_F(0xf) | BLENDEQ_B_FUNC_F(0xf); 581 u32 val = 0; 582 583 switch (pixel_alpha) { 584 case DRM_MODE_BLEND_PIXEL_NONE: 585 case DRM_MODE_BLEND_COVERAGE: 586 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA_A); 587 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A); 588 break; 589 case DRM_MODE_BLEND_PREMULTI: 590 default: 591 if (alpha != DRM_BLEND_ALPHA_OPAQUE) { 592 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA0); 593 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A); 594 } else { 595 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ONE); 596 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A); 597 } 598 break; 599 } 600 fimd_set_bits(ctx, BLENDEQx(win), mask, val); 601 } 602 603 static void fimd_win_set_bldmod(struct fimd_context *ctx, unsigned int win, 604 unsigned int alpha, unsigned int pixel_alpha) 605 { 606 u32 win_alpha_l = (alpha >> 8) & 0xf; 607 u32 win_alpha_h = alpha >> 12; 608 u32 val = 0; 609 610 switch (pixel_alpha) { 611 case DRM_MODE_BLEND_PIXEL_NONE: 612 break; 613 case DRM_MODE_BLEND_COVERAGE: 614 case DRM_MODE_BLEND_PREMULTI: 615 default: 616 val |= WINCON1_ALPHA_SEL; 617 val |= WINCON1_BLD_PIX; 618 val |= WINCON1_ALPHA_MUL; 619 break; 620 } 621 fimd_set_bits(ctx, WINCON(win), WINCONx_BLEND_MODE_MASK, val); 622 623 /* OSD alpha */ 624 val = VIDISD14C_ALPHA0_R(win_alpha_h) | 625 VIDISD14C_ALPHA0_G(win_alpha_h) | 626 VIDISD14C_ALPHA0_B(win_alpha_h) | 627 VIDISD14C_ALPHA1_R(0x0) | 628 VIDISD14C_ALPHA1_G(0x0) | 629 VIDISD14C_ALPHA1_B(0x0); 630 writel(val, ctx->regs + VIDOSD_C(win)); 631 632 val = VIDW_ALPHA_R(win_alpha_l) | VIDW_ALPHA_G(win_alpha_l) | 633 VIDW_ALPHA_B(win_alpha_l); 634 writel(val, ctx->regs + VIDWnALPHA0(win)); 635 636 val = VIDW_ALPHA_R(0x0) | VIDW_ALPHA_G(0x0) | 637 VIDW_ALPHA_B(0x0); 638 writel(val, ctx->regs + VIDWnALPHA1(win)); 639 640 fimd_set_bits(ctx, BLENDCON, BLENDCON_NEW_MASK, 641 BLENDCON_NEW_8BIT_ALPHA_VALUE); 642 } 643 644 static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win, 645 struct drm_framebuffer *fb, int width) 646 { 647 struct exynos_drm_plane plane = ctx->planes[win]; 648 struct exynos_drm_plane_state *state = 649 to_exynos_plane_state(plane.base.state); 650 uint32_t pixel_format = fb->format->format; 651 unsigned int alpha = state->base.alpha; 652 u32 val = WINCONx_ENWIN; 653 unsigned int pixel_alpha; 654 655 if (fb->format->has_alpha) 656 pixel_alpha = state->base.pixel_blend_mode; 657 else 658 pixel_alpha = DRM_MODE_BLEND_PIXEL_NONE; 659 660 /* 661 * In case of s3c64xx, window 0 doesn't support alpha channel. 662 * So the request format is ARGB8888 then change it to XRGB8888. 663 */ 664 if (ctx->driver_data->has_limited_fmt && !win) { 665 if (pixel_format == DRM_FORMAT_ARGB8888) 666 pixel_format = DRM_FORMAT_XRGB8888; 667 } 668 669 switch (pixel_format) { 670 case DRM_FORMAT_C8: 671 val |= WINCON0_BPPMODE_8BPP_PALETTE; 672 val |= WINCONx_BURSTLEN_8WORD; 673 val |= WINCONx_BYTSWP; 674 break; 675 case DRM_FORMAT_XRGB1555: 676 val |= WINCON0_BPPMODE_16BPP_1555; 677 val |= WINCONx_HAWSWP; 678 val |= WINCONx_BURSTLEN_16WORD; 679 break; 680 case DRM_FORMAT_RGB565: 681 val |= WINCON0_BPPMODE_16BPP_565; 682 val |= WINCONx_HAWSWP; 683 val |= WINCONx_BURSTLEN_16WORD; 684 break; 685 case DRM_FORMAT_XRGB8888: 686 val |= WINCON0_BPPMODE_24BPP_888; 687 val |= WINCONx_WSWP; 688 val |= WINCONx_BURSTLEN_16WORD; 689 break; 690 case DRM_FORMAT_ARGB8888: 691 default: 692 val |= WINCON1_BPPMODE_25BPP_A1888; 693 val |= WINCONx_WSWP; 694 val |= WINCONx_BURSTLEN_16WORD; 695 break; 696 } 697 698 /* 699 * Setting dma-burst to 16Word causes permanent tearing for very small 700 * buffers, e.g. cursor buffer. Burst Mode switching which based on 701 * plane size is not recommended as plane size varies alot towards the 702 * end of the screen and rapid movement causes unstable DMA, but it is 703 * still better to change dma-burst than displaying garbage. 704 */ 705 706 if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) { 707 val &= ~WINCONx_BURSTLEN_MASK; 708 val |= WINCONx_BURSTLEN_4WORD; 709 } 710 fimd_set_bits(ctx, WINCON(win), ~WINCONx_BLEND_MODE_MASK, val); 711 712 /* hardware window 0 doesn't support alpha channel. */ 713 if (win != 0) { 714 fimd_win_set_bldmod(ctx, win, alpha, pixel_alpha); 715 fimd_win_set_bldeq(ctx, win, alpha, pixel_alpha); 716 } 717 } 718 719 static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win) 720 { 721 unsigned int keycon0 = 0, keycon1 = 0; 722 723 keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F | 724 WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); 725 726 keycon1 = WxKEYCON1_COLVAL(0xffffffff); 727 728 writel(keycon0, ctx->regs + WKEYCON0_BASE(win)); 729 writel(keycon1, ctx->regs + WKEYCON1_BASE(win)); 730 } 731 732 /** 733 * fimd_shadow_protect_win() - disable updating values from shadow registers at vsync 734 * 735 * @ctx: local driver data 736 * @win: window to protect registers for 737 * @protect: 1 to protect (disable updates) 738 */ 739 static void fimd_shadow_protect_win(struct fimd_context *ctx, 740 unsigned int win, bool protect) 741 { 742 u32 reg, bits, val; 743 744 /* 745 * SHADOWCON/PRTCON register is used for enabling timing. 746 * 747 * for example, once only width value of a register is set, 748 * if the dma is started then fimd hardware could malfunction so 749 * with protect window setting, the register fields with prefix '_F' 750 * wouldn't be updated at vsync also but updated once unprotect window 751 * is set. 752 */ 753 754 if (ctx->driver_data->has_shadowcon) { 755 reg = SHADOWCON; 756 bits = SHADOWCON_WINx_PROTECT(win); 757 } else { 758 reg = PRTCON; 759 bits = PRTCON_PROTECT; 760 } 761 762 val = readl(ctx->regs + reg); 763 if (protect) 764 val |= bits; 765 else 766 val &= ~bits; 767 writel(val, ctx->regs + reg); 768 } 769 770 static void fimd_atomic_begin(struct exynos_drm_crtc *crtc) 771 { 772 struct fimd_context *ctx = crtc->ctx; 773 int i; 774 775 if (ctx->suspended) 776 return; 777 778 for (i = 0; i < WINDOWS_NR; i++) 779 fimd_shadow_protect_win(ctx, i, true); 780 } 781 782 static void fimd_atomic_flush(struct exynos_drm_crtc *crtc) 783 { 784 struct fimd_context *ctx = crtc->ctx; 785 int i; 786 787 if (ctx->suspended) 788 return; 789 790 for (i = 0; i < WINDOWS_NR; i++) 791 fimd_shadow_protect_win(ctx, i, false); 792 793 exynos_crtc_handle_event(crtc); 794 } 795 796 static void fimd_update_plane(struct exynos_drm_crtc *crtc, 797 struct exynos_drm_plane *plane) 798 { 799 struct exynos_drm_plane_state *state = 800 to_exynos_plane_state(plane->base.state); 801 struct fimd_context *ctx = crtc->ctx; 802 struct drm_framebuffer *fb = state->base.fb; 803 dma_addr_t dma_addr; 804 unsigned long val, size, offset; 805 unsigned int last_x, last_y, buf_offsize, line_size; 806 unsigned int win = plane->index; 807 unsigned int cpp = fb->format->cpp[0]; 808 unsigned int pitch = fb->pitches[0]; 809 810 if (ctx->suspended) 811 return; 812 813 offset = state->src.x * cpp; 814 offset += state->src.y * pitch; 815 816 /* buffer start address */ 817 dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset; 818 val = (unsigned long)dma_addr; 819 writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); 820 821 /* buffer end address */ 822 size = pitch * state->crtc.h; 823 val = (unsigned long)(dma_addr + size); 824 writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); 825 826 DRM_DEV_DEBUG_KMS(ctx->dev, 827 "start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n", 828 (unsigned long)dma_addr, val, size); 829 DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n", 830 state->crtc.w, state->crtc.h); 831 832 /* buffer size */ 833 buf_offsize = pitch - (state->crtc.w * cpp); 834 line_size = state->crtc.w * cpp; 835 val = VIDW_BUF_SIZE_OFFSET(buf_offsize) | 836 VIDW_BUF_SIZE_PAGEWIDTH(line_size) | 837 VIDW_BUF_SIZE_OFFSET_E(buf_offsize) | 838 VIDW_BUF_SIZE_PAGEWIDTH_E(line_size); 839 writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0)); 840 841 /* OSD position */ 842 val = VIDOSDxA_TOPLEFT_X(state->crtc.x) | 843 VIDOSDxA_TOPLEFT_Y(state->crtc.y) | 844 VIDOSDxA_TOPLEFT_X_E(state->crtc.x) | 845 VIDOSDxA_TOPLEFT_Y_E(state->crtc.y); 846 writel(val, ctx->regs + VIDOSD_A(win)); 847 848 last_x = state->crtc.x + state->crtc.w; 849 if (last_x) 850 last_x--; 851 last_y = state->crtc.y + state->crtc.h; 852 if (last_y) 853 last_y--; 854 855 val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) | 856 VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y); 857 858 writel(val, ctx->regs + VIDOSD_B(win)); 859 860 DRM_DEV_DEBUG_KMS(ctx->dev, 861 "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n", 862 state->crtc.x, state->crtc.y, last_x, last_y); 863 864 /* OSD size */ 865 if (win != 3 && win != 4) { 866 u32 offset = VIDOSD_D(win); 867 if (win == 0) 868 offset = VIDOSD_C(win); 869 val = state->crtc.w * state->crtc.h; 870 writel(val, ctx->regs + offset); 871 872 DRM_DEV_DEBUG_KMS(ctx->dev, "osd size = 0x%x\n", 873 (unsigned int)val); 874 } 875 876 fimd_win_set_pixfmt(ctx, win, fb, state->src.w); 877 878 /* hardware window 0 doesn't support color key. */ 879 if (win != 0) 880 fimd_win_set_colkey(ctx, win); 881 882 fimd_enable_video_output(ctx, win, true); 883 884 if (ctx->driver_data->has_shadowcon) 885 fimd_enable_shadow_channel_path(ctx, win, true); 886 887 if (ctx->i80_if) 888 atomic_set(&ctx->win_updated, 1); 889 } 890 891 static void fimd_disable_plane(struct exynos_drm_crtc *crtc, 892 struct exynos_drm_plane *plane) 893 { 894 struct fimd_context *ctx = crtc->ctx; 895 unsigned int win = plane->index; 896 897 if (ctx->suspended) 898 return; 899 900 fimd_enable_video_output(ctx, win, false); 901 902 if (ctx->driver_data->has_shadowcon) 903 fimd_enable_shadow_channel_path(ctx, win, false); 904 } 905 906 static void fimd_atomic_enable(struct exynos_drm_crtc *crtc) 907 { 908 struct fimd_context *ctx = crtc->ctx; 909 910 if (!ctx->suspended) 911 return; 912 913 ctx->suspended = false; 914 915 if (pm_runtime_resume_and_get(ctx->dev) < 0) { 916 dev_warn(ctx->dev, "failed to enable FIMD device.\n"); 917 return; 918 } 919 920 /* if vblank was enabled status, enable it again. */ 921 if (test_and_clear_bit(0, &ctx->irq_flags)) 922 fimd_enable_vblank(ctx->crtc); 923 924 fimd_commit(ctx->crtc); 925 } 926 927 static void fimd_atomic_disable(struct exynos_drm_crtc *crtc) 928 { 929 struct fimd_context *ctx = crtc->ctx; 930 int i; 931 932 if (ctx->suspended) 933 return; 934 935 /* 936 * We need to make sure that all windows are disabled before we 937 * suspend that connector. Otherwise we might try to scan from 938 * a destroyed buffer later. 939 */ 940 for (i = 0; i < WINDOWS_NR; i++) 941 fimd_disable_plane(crtc, &ctx->planes[i]); 942 943 fimd_enable_vblank(crtc); 944 fimd_wait_for_vblank(crtc); 945 fimd_disable_vblank(crtc); 946 947 writel(0, ctx->regs + VIDCON0); 948 949 pm_runtime_put_sync(ctx->dev); 950 ctx->suspended = true; 951 } 952 953 static void fimd_trigger(struct device *dev) 954 { 955 struct fimd_context *ctx = dev_get_drvdata(dev); 956 const struct fimd_driver_data *driver_data = ctx->driver_data; 957 void *timing_base = ctx->regs + driver_data->timing_base; 958 u32 reg; 959 960 /* 961 * Skips triggering if in triggering state, because multiple triggering 962 * requests can cause panel reset. 963 */ 964 if (atomic_read(&ctx->triggering)) 965 return; 966 967 /* Enters triggering mode */ 968 atomic_set(&ctx->triggering, 1); 969 970 reg = readl(timing_base + TRIGCON); 971 reg |= (TRGMODE_ENABLE | SWTRGCMD_ENABLE); 972 writel(reg, timing_base + TRIGCON); 973 974 /* 975 * Exits triggering mode if vblank is not enabled yet, because when the 976 * VIDINTCON0 register is not set, it can not exit from triggering mode. 977 */ 978 if (!test_bit(0, &ctx->irq_flags)) 979 atomic_set(&ctx->triggering, 0); 980 } 981 982 static void fimd_te_handler(struct exynos_drm_crtc *crtc) 983 { 984 struct fimd_context *ctx = crtc->ctx; 985 u32 trg_type = ctx->driver_data->trg_type; 986 987 /* Checks the crtc is detached already from encoder */ 988 if (!ctx->drm_dev) 989 return; 990 991 if (trg_type == I80_HW_TRG) 992 goto out; 993 994 /* 995 * If there is a page flip request, triggers and handles the page flip 996 * event so that current fb can be updated into panel GRAM. 997 */ 998 if (atomic_add_unless(&ctx->win_updated, -1, 0)) 999 fimd_trigger(ctx->dev); 1000 1001 out: 1002 /* Wakes up vsync event queue */ 1003 if (atomic_read(&ctx->wait_vsync_event)) { 1004 atomic_set(&ctx->wait_vsync_event, 0); 1005 wake_up(&ctx->wait_vsync_queue); 1006 } 1007 1008 if (test_bit(0, &ctx->irq_flags)) 1009 drm_crtc_handle_vblank(&ctx->crtc->base); 1010 } 1011 1012 static void fimd_dp_clock_enable(struct exynos_drm_clk *clk, bool enable) 1013 { 1014 struct fimd_context *ctx = container_of(clk, struct fimd_context, 1015 dp_clk); 1016 u32 val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE; 1017 writel(val, ctx->regs + DP_MIE_CLKCON); 1018 } 1019 1020 static const struct exynos_drm_crtc_ops fimd_crtc_ops = { 1021 .atomic_enable = fimd_atomic_enable, 1022 .atomic_disable = fimd_atomic_disable, 1023 .enable_vblank = fimd_enable_vblank, 1024 .disable_vblank = fimd_disable_vblank, 1025 .atomic_begin = fimd_atomic_begin, 1026 .update_plane = fimd_update_plane, 1027 .disable_plane = fimd_disable_plane, 1028 .atomic_flush = fimd_atomic_flush, 1029 .atomic_check = fimd_atomic_check, 1030 .te_handler = fimd_te_handler, 1031 }; 1032 1033 static irqreturn_t fimd_irq_handler(int irq, void *dev_id) 1034 { 1035 struct fimd_context *ctx = (struct fimd_context *)dev_id; 1036 u32 val, clear_bit; 1037 1038 val = readl(ctx->regs + VIDINTCON1); 1039 1040 clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME; 1041 if (val & clear_bit) 1042 writel(clear_bit, ctx->regs + VIDINTCON1); 1043 1044 /* check the crtc is detached already from encoder */ 1045 if (!ctx->drm_dev) 1046 goto out; 1047 1048 if (!ctx->i80_if) 1049 drm_crtc_handle_vblank(&ctx->crtc->base); 1050 1051 if (ctx->i80_if) { 1052 /* Exits triggering mode */ 1053 atomic_set(&ctx->triggering, 0); 1054 } else { 1055 /* set wait vsync event to zero and wake up queue. */ 1056 if (atomic_read(&ctx->wait_vsync_event)) { 1057 atomic_set(&ctx->wait_vsync_event, 0); 1058 wake_up(&ctx->wait_vsync_queue); 1059 } 1060 } 1061 1062 out: 1063 return IRQ_HANDLED; 1064 } 1065 1066 static int fimd_bind(struct device *dev, struct device *master, void *data) 1067 { 1068 struct fimd_context *ctx = dev_get_drvdata(dev); 1069 struct drm_device *drm_dev = data; 1070 struct exynos_drm_plane *exynos_plane; 1071 unsigned int i; 1072 int ret; 1073 1074 ctx->drm_dev = drm_dev; 1075 1076 for (i = 0; i < WINDOWS_NR; i++) { 1077 ctx->configs[i].pixel_formats = fimd_formats; 1078 ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats); 1079 ctx->configs[i].zpos = i; 1080 ctx->configs[i].type = fimd_win_types[i]; 1081 ctx->configs[i].capabilities = capabilities[i]; 1082 ret = exynos_plane_init(drm_dev, &ctx->planes[i], i, 1083 &ctx->configs[i]); 1084 if (ret) 1085 return ret; 1086 } 1087 1088 exynos_plane = &ctx->planes[DEFAULT_WIN]; 1089 ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base, 1090 EXYNOS_DISPLAY_TYPE_LCD, &fimd_crtc_ops, ctx); 1091 if (IS_ERR(ctx->crtc)) 1092 return PTR_ERR(ctx->crtc); 1093 1094 if (ctx->driver_data->has_dp_clk) { 1095 ctx->dp_clk.enable = fimd_dp_clock_enable; 1096 ctx->crtc->pipe_clk = &ctx->dp_clk; 1097 } 1098 1099 if (ctx->encoder) 1100 exynos_dpi_bind(drm_dev, ctx->encoder); 1101 1102 if (is_drm_iommu_supported(drm_dev)) { 1103 int ret; 1104 1105 ret = fimd_clear_channels(ctx->crtc); 1106 if (ret < 0) 1107 return ret; 1108 } 1109 1110 return exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv); 1111 } 1112 1113 static void fimd_unbind(struct device *dev, struct device *master, 1114 void *data) 1115 { 1116 struct fimd_context *ctx = dev_get_drvdata(dev); 1117 1118 fimd_atomic_disable(ctx->crtc); 1119 1120 exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv); 1121 1122 if (ctx->encoder) 1123 exynos_dpi_remove(ctx->encoder); 1124 } 1125 1126 static const struct component_ops fimd_component_ops = { 1127 .bind = fimd_bind, 1128 .unbind = fimd_unbind, 1129 }; 1130 1131 static int fimd_probe(struct platform_device *pdev) 1132 { 1133 struct device *dev = &pdev->dev; 1134 struct fimd_context *ctx; 1135 struct device_node *i80_if_timings; 1136 struct resource *res; 1137 int ret; 1138 1139 if (!dev->of_node) 1140 return -ENODEV; 1141 1142 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); 1143 if (!ctx) 1144 return -ENOMEM; 1145 1146 ctx->dev = dev; 1147 ctx->suspended = true; 1148 ctx->driver_data = of_device_get_match_data(dev); 1149 1150 if (of_property_read_bool(dev->of_node, "samsung,invert-vden")) 1151 ctx->vidcon1 |= VIDCON1_INV_VDEN; 1152 if (of_property_read_bool(dev->of_node, "samsung,invert-vclk")) 1153 ctx->vidcon1 |= VIDCON1_INV_VCLK; 1154 1155 i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings"); 1156 if (i80_if_timings) { 1157 u32 val; 1158 1159 ctx->i80_if = true; 1160 1161 if (ctx->driver_data->has_vidoutcon) 1162 ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0; 1163 else 1164 ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0; 1165 /* 1166 * The user manual describes that this "DSI_EN" bit is required 1167 * to enable I80 24-bit data interface. 1168 */ 1169 ctx->vidcon0 |= VIDCON0_DSI_EN; 1170 1171 if (of_property_read_u32(i80_if_timings, "cs-setup", &val)) 1172 val = 0; 1173 ctx->i80ifcon = LCD_CS_SETUP(val); 1174 if (of_property_read_u32(i80_if_timings, "wr-setup", &val)) 1175 val = 0; 1176 ctx->i80ifcon |= LCD_WR_SETUP(val); 1177 if (of_property_read_u32(i80_if_timings, "wr-active", &val)) 1178 val = 1; 1179 ctx->i80ifcon |= LCD_WR_ACTIVE(val); 1180 if (of_property_read_u32(i80_if_timings, "wr-hold", &val)) 1181 val = 0; 1182 ctx->i80ifcon |= LCD_WR_HOLD(val); 1183 } 1184 of_node_put(i80_if_timings); 1185 1186 ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, 1187 "samsung,sysreg"); 1188 if (IS_ERR(ctx->sysreg)) { 1189 dev_warn(dev, "failed to get system register.\n"); 1190 ctx->sysreg = NULL; 1191 } 1192 1193 ctx->bus_clk = devm_clk_get(dev, "fimd"); 1194 if (IS_ERR(ctx->bus_clk)) { 1195 dev_err(dev, "failed to get bus clock\n"); 1196 return PTR_ERR(ctx->bus_clk); 1197 } 1198 1199 ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd"); 1200 if (IS_ERR(ctx->lcd_clk)) { 1201 dev_err(dev, "failed to get lcd clock\n"); 1202 return PTR_ERR(ctx->lcd_clk); 1203 } 1204 1205 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1206 1207 ctx->regs = devm_ioremap_resource(dev, res); 1208 if (IS_ERR(ctx->regs)) 1209 return PTR_ERR(ctx->regs); 1210 1211 res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, 1212 ctx->i80_if ? "lcd_sys" : "vsync"); 1213 if (!res) { 1214 dev_err(dev, "irq request failed.\n"); 1215 return -ENXIO; 1216 } 1217 1218 ret = devm_request_irq(dev, res->start, fimd_irq_handler, 1219 0, "drm_fimd", ctx); 1220 if (ret) { 1221 dev_err(dev, "irq request failed.\n"); 1222 return ret; 1223 } 1224 1225 init_waitqueue_head(&ctx->wait_vsync_queue); 1226 atomic_set(&ctx->wait_vsync_event, 0); 1227 1228 platform_set_drvdata(pdev, ctx); 1229 1230 ctx->encoder = exynos_dpi_probe(dev); 1231 if (IS_ERR(ctx->encoder)) 1232 return PTR_ERR(ctx->encoder); 1233 1234 pm_runtime_enable(dev); 1235 1236 ret = component_add(dev, &fimd_component_ops); 1237 if (ret) 1238 goto err_disable_pm_runtime; 1239 1240 return ret; 1241 1242 err_disable_pm_runtime: 1243 pm_runtime_disable(dev); 1244 1245 return ret; 1246 } 1247 1248 static int fimd_remove(struct platform_device *pdev) 1249 { 1250 pm_runtime_disable(&pdev->dev); 1251 1252 component_del(&pdev->dev, &fimd_component_ops); 1253 1254 return 0; 1255 } 1256 1257 #ifdef CONFIG_PM 1258 static int exynos_fimd_suspend(struct device *dev) 1259 { 1260 struct fimd_context *ctx = dev_get_drvdata(dev); 1261 1262 clk_disable_unprepare(ctx->lcd_clk); 1263 clk_disable_unprepare(ctx->bus_clk); 1264 1265 return 0; 1266 } 1267 1268 static int exynos_fimd_resume(struct device *dev) 1269 { 1270 struct fimd_context *ctx = dev_get_drvdata(dev); 1271 int ret; 1272 1273 ret = clk_prepare_enable(ctx->bus_clk); 1274 if (ret < 0) { 1275 DRM_DEV_ERROR(dev, 1276 "Failed to prepare_enable the bus clk [%d]\n", 1277 ret); 1278 return ret; 1279 } 1280 1281 ret = clk_prepare_enable(ctx->lcd_clk); 1282 if (ret < 0) { 1283 DRM_DEV_ERROR(dev, 1284 "Failed to prepare_enable the lcd clk [%d]\n", 1285 ret); 1286 return ret; 1287 } 1288 1289 return 0; 1290 } 1291 #endif 1292 1293 static const struct dev_pm_ops exynos_fimd_pm_ops = { 1294 SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL) 1295 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, 1296 pm_runtime_force_resume) 1297 }; 1298 1299 struct platform_driver fimd_driver = { 1300 .probe = fimd_probe, 1301 .remove = fimd_remove, 1302 .driver = { 1303 .name = "exynos4-fb", 1304 .owner = THIS_MODULE, 1305 .pm = &exynos_fimd_pm_ops, 1306 .of_match_table = fimd_driver_dt_match, 1307 }, 1308 }; 1309