1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* exynos_drm_fimd.c
3 *
4 * Copyright (C) 2011 Samsung Electronics Co.Ltd
5 * Authors:
6 * Joonyoung Shim <jy0922.shim@samsung.com>
7 * Inki Dae <inki.dae@samsung.com>
8 */
9
10 #include <linux/clk.h>
11 #include <linux/component.h>
12 #include <linux/kernel.h>
13 #include <linux/mfd/syscon.h>
14 #include <linux/of.h>
15 #include <linux/platform_device.h>
16 #include <linux/pm_runtime.h>
17 #include <linux/regmap.h>
18
19 #include <video/of_display_timing.h>
20 #include <video/of_videomode.h>
21 #include <video/samsung_fimd.h>
22
23 #include <drm/drm_blend.h>
24 #include <drm/drm_fourcc.h>
25 #include <drm/drm_framebuffer.h>
26 #include <drm/drm_vblank.h>
27 #include <drm/exynos_drm.h>
28
29 #include "exynos_drm_crtc.h"
30 #include "exynos_drm_drv.h"
31 #include "exynos_drm_fb.h"
32 #include "exynos_drm_plane.h"
33
34 /*
35 * FIMD stands for Fully Interactive Mobile Display and
36 * as a display controller, it transfers contents drawn on memory
37 * to a LCD Panel through Display Interfaces such as RGB or
38 * CPU Interface.
39 */
40
41 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128
42
43 /* position control register for hardware window 0, 2 ~ 4.*/
44 #define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16)
45 #define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16)
46 /*
47 * size control register for hardware windows 0 and alpha control register
48 * for hardware windows 1 ~ 4
49 */
50 #define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16)
51 /* size control register for hardware windows 1 ~ 2. */
52 #define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16)
53
54 #define VIDWnALPHA0(win) (VIDW_ALPHA + 0x00 + (win) * 8)
55 #define VIDWnALPHA1(win) (VIDW_ALPHA + 0x04 + (win) * 8)
56
57 #define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8)
58 #define VIDWx_BUF_START_S(win, buf) (VIDW_BUF_START_S(buf) + (win) * 8)
59 #define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8)
60 #define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4)
61
62 /* color key control register for hardware window 1 ~ 4. */
63 #define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8))
64 /* color key value register for hardware window 1 ~ 4. */
65 #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8))
66
67 /* I80 trigger control register */
68 #define TRIGCON 0x1A4
69 #define TRGMODE_ENABLE (1 << 0)
70 #define SWTRGCMD_ENABLE (1 << 1)
71 /* Exynos3250, 3472, 5260 5410, 5420 and 5422 only supported. */
72 #define HWTRGEN_ENABLE (1 << 3)
73 #define HWTRGMASK_ENABLE (1 << 4)
74 /* Exynos3250, 3472, 5260, 5420 and 5422 only supported. */
75 #define HWTRIGEN_PER_ENABLE (1 << 31)
76
77 /* display mode change control register except exynos4 */
78 #define VIDOUT_CON 0x000
79 #define VIDOUT_CON_F_I80_LDI0 (0x2 << 8)
80
81 /* I80 interface control for main LDI register */
82 #define I80IFCONFAx(x) (0x1B0 + (x) * 4)
83 #define I80IFCONFBx(x) (0x1B8 + (x) * 4)
84 #define LCD_CS_SETUP(x) ((x) << 16)
85 #define LCD_WR_SETUP(x) ((x) << 12)
86 #define LCD_WR_ACTIVE(x) ((x) << 8)
87 #define LCD_WR_HOLD(x) ((x) << 4)
88 #define I80IFEN_ENABLE (1 << 0)
89
90 /* FIMD has totally five hardware windows. */
91 #define WINDOWS_NR 5
92
93 /* HW trigger flag on i80 panel. */
94 #define I80_HW_TRG (1 << 1)
95
96 struct fimd_driver_data {
97 unsigned int timing_base;
98 unsigned int lcdblk_offset;
99 unsigned int lcdblk_vt_shift;
100 unsigned int lcdblk_bypass_shift;
101 unsigned int lcdblk_mic_bypass_shift;
102 unsigned int trg_type;
103
104 unsigned int has_shadowcon:1;
105 unsigned int has_clksel:1;
106 unsigned int has_limited_fmt:1;
107 unsigned int has_vidoutcon:1;
108 unsigned int has_vtsel:1;
109 unsigned int has_mic_bypass:1;
110 unsigned int has_dp_clk:1;
111 unsigned int has_hw_trigger:1;
112 unsigned int has_trigger_per_te:1;
113 unsigned int has_bgr_support:1;
114 };
115
116 static struct fimd_driver_data s3c64xx_fimd_driver_data = {
117 .timing_base = 0x0,
118 .has_clksel = 1,
119 .has_limited_fmt = 1,
120 };
121
122 static struct fimd_driver_data s5pv210_fimd_driver_data = {
123 .timing_base = 0x0,
124 .has_shadowcon = 1,
125 .has_clksel = 1,
126 };
127
128 static struct fimd_driver_data exynos3_fimd_driver_data = {
129 .timing_base = 0x20000,
130 .lcdblk_offset = 0x210,
131 .lcdblk_bypass_shift = 1,
132 .has_shadowcon = 1,
133 .has_vidoutcon = 1,
134 };
135
136 static struct fimd_driver_data exynos4_fimd_driver_data = {
137 .timing_base = 0x0,
138 .lcdblk_offset = 0x210,
139 .lcdblk_vt_shift = 10,
140 .lcdblk_bypass_shift = 1,
141 .has_shadowcon = 1,
142 .has_vtsel = 1,
143 .has_bgr_support = 1,
144 };
145
146 static struct fimd_driver_data exynos5_fimd_driver_data = {
147 .timing_base = 0x20000,
148 .lcdblk_offset = 0x214,
149 .lcdblk_vt_shift = 24,
150 .lcdblk_bypass_shift = 15,
151 .has_shadowcon = 1,
152 .has_vidoutcon = 1,
153 .has_vtsel = 1,
154 .has_dp_clk = 1,
155 .has_bgr_support = 1,
156 };
157
158 static struct fimd_driver_data exynos5420_fimd_driver_data = {
159 .timing_base = 0x20000,
160 .lcdblk_offset = 0x214,
161 .lcdblk_vt_shift = 24,
162 .lcdblk_bypass_shift = 15,
163 .lcdblk_mic_bypass_shift = 11,
164 .has_shadowcon = 1,
165 .has_vidoutcon = 1,
166 .has_vtsel = 1,
167 .has_mic_bypass = 1,
168 .has_dp_clk = 1,
169 .has_bgr_support = 1,
170 };
171
172 struct fimd_context {
173 struct device *dev;
174 struct drm_device *drm_dev;
175 void *dma_priv;
176 struct exynos_drm_crtc *crtc;
177 struct exynos_drm_plane planes[WINDOWS_NR];
178 struct exynos_drm_plane_config configs[WINDOWS_NR];
179 struct clk *bus_clk;
180 struct clk *lcd_clk;
181 void __iomem *regs;
182 struct regmap *sysreg;
183 unsigned long irq_flags;
184 u32 vidcon0;
185 u32 vidcon1;
186 u32 vidout_con;
187 u32 i80ifcon;
188 bool i80_if;
189 bool suspended;
190 wait_queue_head_t wait_vsync_queue;
191 atomic_t wait_vsync_event;
192 atomic_t win_updated;
193 atomic_t triggering;
194 u32 clkdiv;
195
196 const struct fimd_driver_data *driver_data;
197 struct drm_encoder *encoder;
198 struct exynos_drm_clk dp_clk;
199 };
200
201 static const struct of_device_id fimd_driver_dt_match[] = {
202 { .compatible = "samsung,s3c6400-fimd",
203 .data = &s3c64xx_fimd_driver_data },
204 { .compatible = "samsung,s5pv210-fimd",
205 .data = &s5pv210_fimd_driver_data },
206 { .compatible = "samsung,exynos3250-fimd",
207 .data = &exynos3_fimd_driver_data },
208 { .compatible = "samsung,exynos4210-fimd",
209 .data = &exynos4_fimd_driver_data },
210 { .compatible = "samsung,exynos5250-fimd",
211 .data = &exynos5_fimd_driver_data },
212 { .compatible = "samsung,exynos5420-fimd",
213 .data = &exynos5420_fimd_driver_data },
214 {},
215 };
216 MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
217
218 static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = {
219 DRM_PLANE_TYPE_PRIMARY,
220 DRM_PLANE_TYPE_OVERLAY,
221 DRM_PLANE_TYPE_OVERLAY,
222 DRM_PLANE_TYPE_OVERLAY,
223 DRM_PLANE_TYPE_CURSOR,
224 };
225
226 static const uint32_t fimd_formats[] = {
227 DRM_FORMAT_C8,
228 DRM_FORMAT_XRGB1555,
229 DRM_FORMAT_RGB565,
230 DRM_FORMAT_XRGB8888,
231 DRM_FORMAT_ARGB8888,
232 };
233
234 static const uint32_t fimd_extended_formats[] = {
235 DRM_FORMAT_C8,
236 DRM_FORMAT_XRGB1555,
237 DRM_FORMAT_XBGR1555,
238 DRM_FORMAT_RGB565,
239 DRM_FORMAT_BGR565,
240 DRM_FORMAT_XRGB8888,
241 DRM_FORMAT_XBGR8888,
242 DRM_FORMAT_ARGB8888,
243 DRM_FORMAT_ABGR8888,
244 };
245
246 static const unsigned int capabilities[WINDOWS_NR] = {
247 0,
248 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
249 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
250 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
251 EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
252 };
253
fimd_set_bits(struct fimd_context * ctx,u32 reg,u32 mask,u32 val)254 static inline void fimd_set_bits(struct fimd_context *ctx, u32 reg, u32 mask,
255 u32 val)
256 {
257 val = (val & mask) | (readl(ctx->regs + reg) & ~mask);
258 writel(val, ctx->regs + reg);
259 }
260
fimd_enable_vblank(struct exynos_drm_crtc * crtc)261 static int fimd_enable_vblank(struct exynos_drm_crtc *crtc)
262 {
263 struct fimd_context *ctx = crtc->ctx;
264 u32 val;
265
266 if (ctx->suspended)
267 return -EPERM;
268
269 if (!test_and_set_bit(0, &ctx->irq_flags)) {
270 val = readl(ctx->regs + VIDINTCON0);
271
272 val |= VIDINTCON0_INT_ENABLE;
273
274 if (ctx->i80_if) {
275 val |= VIDINTCON0_INT_I80IFDONE;
276 val |= VIDINTCON0_INT_SYSMAINCON;
277 val &= ~VIDINTCON0_INT_SYSSUBCON;
278 } else {
279 val |= VIDINTCON0_INT_FRAME;
280
281 val &= ~VIDINTCON0_FRAMESEL0_MASK;
282 val |= VIDINTCON0_FRAMESEL0_FRONTPORCH;
283 val &= ~VIDINTCON0_FRAMESEL1_MASK;
284 val |= VIDINTCON0_FRAMESEL1_NONE;
285 }
286
287 writel(val, ctx->regs + VIDINTCON0);
288 }
289
290 return 0;
291 }
292
fimd_disable_vblank(struct exynos_drm_crtc * crtc)293 static void fimd_disable_vblank(struct exynos_drm_crtc *crtc)
294 {
295 struct fimd_context *ctx = crtc->ctx;
296 u32 val;
297
298 if (ctx->suspended)
299 return;
300
301 if (test_and_clear_bit(0, &ctx->irq_flags)) {
302 val = readl(ctx->regs + VIDINTCON0);
303
304 val &= ~VIDINTCON0_INT_ENABLE;
305
306 if (ctx->i80_if) {
307 val &= ~VIDINTCON0_INT_I80IFDONE;
308 val &= ~VIDINTCON0_INT_SYSMAINCON;
309 val &= ~VIDINTCON0_INT_SYSSUBCON;
310 } else
311 val &= ~VIDINTCON0_INT_FRAME;
312
313 writel(val, ctx->regs + VIDINTCON0);
314 }
315 }
316
fimd_wait_for_vblank(struct exynos_drm_crtc * crtc)317 static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc)
318 {
319 struct fimd_context *ctx = crtc->ctx;
320
321 if (ctx->suspended)
322 return;
323
324 atomic_set(&ctx->wait_vsync_event, 1);
325
326 /*
327 * wait for FIMD to signal VSYNC interrupt or return after
328 * timeout which is set to 50ms (refresh rate of 20).
329 */
330 if (!wait_event_timeout(ctx->wait_vsync_queue,
331 !atomic_read(&ctx->wait_vsync_event),
332 HZ/20))
333 DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n");
334 }
335
fimd_enable_video_output(struct fimd_context * ctx,unsigned int win,bool enable)336 static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win,
337 bool enable)
338 {
339 u32 val = readl(ctx->regs + WINCON(win));
340
341 if (enable)
342 val |= WINCONx_ENWIN;
343 else
344 val &= ~WINCONx_ENWIN;
345
346 writel(val, ctx->regs + WINCON(win));
347 }
348
fimd_enable_shadow_channel_path(struct fimd_context * ctx,unsigned int win,bool enable)349 static void fimd_enable_shadow_channel_path(struct fimd_context *ctx,
350 unsigned int win,
351 bool enable)
352 {
353 u32 val = readl(ctx->regs + SHADOWCON);
354
355 if (enable)
356 val |= SHADOWCON_CHx_ENABLE(win);
357 else
358 val &= ~SHADOWCON_CHx_ENABLE(win);
359
360 writel(val, ctx->regs + SHADOWCON);
361 }
362
fimd_clear_channels(struct exynos_drm_crtc * crtc)363 static int fimd_clear_channels(struct exynos_drm_crtc *crtc)
364 {
365 struct fimd_context *ctx = crtc->ctx;
366 unsigned int win, ch_enabled = 0;
367 int ret;
368
369 /* Hardware is in unknown state, so ensure it gets enabled properly */
370 ret = pm_runtime_resume_and_get(ctx->dev);
371 if (ret < 0) {
372 dev_err(ctx->dev, "failed to enable FIMD device.\n");
373 return ret;
374 }
375
376 clk_prepare_enable(ctx->bus_clk);
377 clk_prepare_enable(ctx->lcd_clk);
378
379 /* Check if any channel is enabled. */
380 for (win = 0; win < WINDOWS_NR; win++) {
381 u32 val = readl(ctx->regs + WINCON(win));
382
383 if (val & WINCONx_ENWIN) {
384 fimd_enable_video_output(ctx, win, false);
385
386 if (ctx->driver_data->has_shadowcon)
387 fimd_enable_shadow_channel_path(ctx, win,
388 false);
389
390 ch_enabled = 1;
391 }
392 }
393
394 /* Wait for vsync, as disable channel takes effect at next vsync */
395 if (ch_enabled) {
396 ctx->suspended = false;
397
398 fimd_enable_vblank(ctx->crtc);
399 fimd_wait_for_vblank(ctx->crtc);
400 fimd_disable_vblank(ctx->crtc);
401
402 ctx->suspended = true;
403 }
404
405 clk_disable_unprepare(ctx->lcd_clk);
406 clk_disable_unprepare(ctx->bus_clk);
407
408 pm_runtime_put(ctx->dev);
409
410 return 0;
411 }
412
413
fimd_atomic_check(struct exynos_drm_crtc * crtc,struct drm_crtc_state * state)414 static int fimd_atomic_check(struct exynos_drm_crtc *crtc,
415 struct drm_crtc_state *state)
416 {
417 struct drm_display_mode *mode = &state->adjusted_mode;
418 struct fimd_context *ctx = crtc->ctx;
419 unsigned long ideal_clk, lcd_rate;
420 u32 clkdiv;
421
422 if (mode->clock == 0) {
423 DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n");
424 return -EINVAL;
425 }
426
427 ideal_clk = mode->clock * 1000;
428
429 if (ctx->i80_if) {
430 /*
431 * The frame done interrupt should be occurred prior to the
432 * next TE signal.
433 */
434 ideal_clk *= 2;
435 }
436
437 lcd_rate = clk_get_rate(ctx->lcd_clk);
438 if (2 * lcd_rate < ideal_clk) {
439 DRM_DEV_ERROR(ctx->dev,
440 "sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n",
441 lcd_rate, ideal_clk);
442 return -EINVAL;
443 }
444
445 /* Find the clock divider value that gets us closest to ideal_clk */
446 clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk);
447 if (clkdiv >= 0x200) {
448 DRM_DEV_ERROR(ctx->dev, "requested pixel clock(%lu) too low\n",
449 ideal_clk);
450 return -EINVAL;
451 }
452
453 ctx->clkdiv = (clkdiv < 0x100) ? clkdiv : 0xff;
454
455 return 0;
456 }
457
fimd_setup_trigger(struct fimd_context * ctx)458 static void fimd_setup_trigger(struct fimd_context *ctx)
459 {
460 void __iomem *timing_base = ctx->regs + ctx->driver_data->timing_base;
461 u32 trg_type = ctx->driver_data->trg_type;
462 u32 val = readl(timing_base + TRIGCON);
463
464 val &= ~(TRGMODE_ENABLE);
465
466 if (trg_type == I80_HW_TRG) {
467 if (ctx->driver_data->has_hw_trigger)
468 val |= HWTRGEN_ENABLE | HWTRGMASK_ENABLE;
469 if (ctx->driver_data->has_trigger_per_te)
470 val |= HWTRIGEN_PER_ENABLE;
471 } else {
472 val |= TRGMODE_ENABLE;
473 }
474
475 writel(val, timing_base + TRIGCON);
476 }
477
fimd_commit(struct exynos_drm_crtc * crtc)478 static void fimd_commit(struct exynos_drm_crtc *crtc)
479 {
480 struct fimd_context *ctx = crtc->ctx;
481 struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
482 const struct fimd_driver_data *driver_data = ctx->driver_data;
483 void *timing_base = ctx->regs + driver_data->timing_base;
484 u32 val;
485
486 if (ctx->suspended)
487 return;
488
489 /* nothing to do if we haven't set the mode yet */
490 if (mode->htotal == 0 || mode->vtotal == 0)
491 return;
492
493 if (ctx->i80_if) {
494 val = ctx->i80ifcon | I80IFEN_ENABLE;
495 writel(val, timing_base + I80IFCONFAx(0));
496
497 /* disable auto frame rate */
498 writel(0, timing_base + I80IFCONFBx(0));
499
500 /* set video type selection to I80 interface */
501 if (driver_data->has_vtsel && ctx->sysreg &&
502 regmap_update_bits(ctx->sysreg,
503 driver_data->lcdblk_offset,
504 0x3 << driver_data->lcdblk_vt_shift,
505 0x1 << driver_data->lcdblk_vt_shift)) {
506 DRM_DEV_ERROR(ctx->dev,
507 "Failed to update sysreg for I80 i/f.\n");
508 return;
509 }
510 } else {
511 int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
512 u32 vidcon1;
513
514 /* setup polarity values */
515 vidcon1 = ctx->vidcon1;
516 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
517 vidcon1 |= VIDCON1_INV_VSYNC;
518 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
519 vidcon1 |= VIDCON1_INV_HSYNC;
520 writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1);
521
522 /* setup vertical timing values. */
523 vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
524 vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
525 vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
526
527 val = VIDTCON0_VBPD(vbpd - 1) |
528 VIDTCON0_VFPD(vfpd - 1) |
529 VIDTCON0_VSPW(vsync_len - 1);
530 writel(val, ctx->regs + driver_data->timing_base + VIDTCON0);
531
532 /* setup horizontal timing values. */
533 hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
534 hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
535 hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
536
537 val = VIDTCON1_HBPD(hbpd - 1) |
538 VIDTCON1_HFPD(hfpd - 1) |
539 VIDTCON1_HSPW(hsync_len - 1);
540 writel(val, ctx->regs + driver_data->timing_base + VIDTCON1);
541 }
542
543 if (driver_data->has_vidoutcon)
544 writel(ctx->vidout_con, timing_base + VIDOUT_CON);
545
546 /* set bypass selection */
547 if (ctx->sysreg && regmap_update_bits(ctx->sysreg,
548 driver_data->lcdblk_offset,
549 0x1 << driver_data->lcdblk_bypass_shift,
550 0x1 << driver_data->lcdblk_bypass_shift)) {
551 DRM_DEV_ERROR(ctx->dev,
552 "Failed to update sysreg for bypass setting.\n");
553 return;
554 }
555
556 /* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
557 * bit should be cleared.
558 */
559 if (driver_data->has_mic_bypass && ctx->sysreg &&
560 regmap_update_bits(ctx->sysreg,
561 driver_data->lcdblk_offset,
562 0x1 << driver_data->lcdblk_mic_bypass_shift,
563 0x1 << driver_data->lcdblk_mic_bypass_shift)) {
564 DRM_DEV_ERROR(ctx->dev,
565 "Failed to update sysreg for bypass mic.\n");
566 return;
567 }
568
569 /* setup horizontal and vertical display size. */
570 val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
571 VIDTCON2_HOZVAL(mode->hdisplay - 1) |
572 VIDTCON2_LINEVAL_E(mode->vdisplay - 1) |
573 VIDTCON2_HOZVAL_E(mode->hdisplay - 1);
574 writel(val, ctx->regs + driver_data->timing_base + VIDTCON2);
575
576 fimd_setup_trigger(ctx);
577
578 /*
579 * fields of register with prefix '_F' would be updated
580 * at vsync(same as dma start)
581 */
582 val = ctx->vidcon0;
583 val |= VIDCON0_ENVID | VIDCON0_ENVID_F;
584
585 if (ctx->driver_data->has_clksel)
586 val |= VIDCON0_CLKSEL_LCD;
587
588 if (ctx->clkdiv > 1)
589 val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR;
590
591 writel(val, ctx->regs + VIDCON0);
592 }
593
fimd_win_set_bldeq(struct fimd_context * ctx,unsigned int win,unsigned int alpha,unsigned int pixel_alpha)594 static void fimd_win_set_bldeq(struct fimd_context *ctx, unsigned int win,
595 unsigned int alpha, unsigned int pixel_alpha)
596 {
597 u32 mask = BLENDEQ_A_FUNC_F(0xf) | BLENDEQ_B_FUNC_F(0xf);
598 u32 val = 0;
599
600 switch (pixel_alpha) {
601 case DRM_MODE_BLEND_PIXEL_NONE:
602 case DRM_MODE_BLEND_COVERAGE:
603 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA_A);
604 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
605 break;
606 case DRM_MODE_BLEND_PREMULTI:
607 default:
608 if (alpha != DRM_BLEND_ALPHA_OPAQUE) {
609 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ALPHA0);
610 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
611 } else {
612 val |= BLENDEQ_A_FUNC_F(BLENDEQ_ONE);
613 val |= BLENDEQ_B_FUNC_F(BLENDEQ_ONE_MINUS_ALPHA_A);
614 }
615 break;
616 }
617 fimd_set_bits(ctx, BLENDEQx(win), mask, val);
618 }
619
fimd_win_set_bldmod(struct fimd_context * ctx,unsigned int win,unsigned int alpha,unsigned int pixel_alpha)620 static void fimd_win_set_bldmod(struct fimd_context *ctx, unsigned int win,
621 unsigned int alpha, unsigned int pixel_alpha)
622 {
623 u32 win_alpha_l = (alpha >> 8) & 0xf;
624 u32 win_alpha_h = alpha >> 12;
625 u32 val = 0;
626
627 switch (pixel_alpha) {
628 case DRM_MODE_BLEND_PIXEL_NONE:
629 break;
630 case DRM_MODE_BLEND_COVERAGE:
631 case DRM_MODE_BLEND_PREMULTI:
632 default:
633 val |= WINCON1_ALPHA_SEL;
634 val |= WINCON1_BLD_PIX;
635 val |= WINCON1_ALPHA_MUL;
636 break;
637 }
638 fimd_set_bits(ctx, WINCON(win), WINCONx_BLEND_MODE_MASK, val);
639
640 /* OSD alpha */
641 val = VIDISD14C_ALPHA0_R(win_alpha_h) |
642 VIDISD14C_ALPHA0_G(win_alpha_h) |
643 VIDISD14C_ALPHA0_B(win_alpha_h) |
644 VIDISD14C_ALPHA1_R(0x0) |
645 VIDISD14C_ALPHA1_G(0x0) |
646 VIDISD14C_ALPHA1_B(0x0);
647 writel(val, ctx->regs + VIDOSD_C(win));
648
649 val = VIDW_ALPHA_R(win_alpha_l) | VIDW_ALPHA_G(win_alpha_l) |
650 VIDW_ALPHA_B(win_alpha_l);
651 writel(val, ctx->regs + VIDWnALPHA0(win));
652
653 val = VIDW_ALPHA_R(0x0) | VIDW_ALPHA_G(0x0) |
654 VIDW_ALPHA_B(0x0);
655 writel(val, ctx->regs + VIDWnALPHA1(win));
656
657 fimd_set_bits(ctx, BLENDCON, BLENDCON_NEW_MASK,
658 BLENDCON_NEW_8BIT_ALPHA_VALUE);
659 }
660
fimd_win_set_pixfmt(struct fimd_context * ctx,unsigned int win,struct drm_framebuffer * fb,int width)661 static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
662 struct drm_framebuffer *fb, int width)
663 {
664 struct exynos_drm_plane *plane = &ctx->planes[win];
665 struct exynos_drm_plane_state *state =
666 to_exynos_plane_state(plane->base.state);
667 uint32_t pixel_format = fb->format->format;
668 unsigned int alpha = state->base.alpha;
669 u32 val = WINCONx_ENWIN;
670 unsigned int pixel_alpha;
671
672 if (fb->format->has_alpha)
673 pixel_alpha = state->base.pixel_blend_mode;
674 else
675 pixel_alpha = DRM_MODE_BLEND_PIXEL_NONE;
676
677 /*
678 * In case of s3c64xx, window 0 doesn't support alpha channel.
679 * So the request format is ARGB8888 then change it to XRGB8888.
680 */
681 if (ctx->driver_data->has_limited_fmt && !win) {
682 if (pixel_format == DRM_FORMAT_ARGB8888)
683 pixel_format = DRM_FORMAT_XRGB8888;
684 }
685
686 switch (pixel_format) {
687 case DRM_FORMAT_C8:
688 val |= WINCON0_BPPMODE_8BPP_PALETTE;
689 val |= WINCONx_BURSTLEN_8WORD;
690 val |= WINCONx_BYTSWP;
691 break;
692 case DRM_FORMAT_XRGB1555:
693 case DRM_FORMAT_XBGR1555:
694 val |= WINCON0_BPPMODE_16BPP_1555;
695 val |= WINCONx_HAWSWP;
696 val |= WINCONx_BURSTLEN_16WORD;
697 break;
698 case DRM_FORMAT_RGB565:
699 case DRM_FORMAT_BGR565:
700 val |= WINCON0_BPPMODE_16BPP_565;
701 val |= WINCONx_HAWSWP;
702 val |= WINCONx_BURSTLEN_16WORD;
703 break;
704 case DRM_FORMAT_XRGB8888:
705 case DRM_FORMAT_XBGR8888:
706 val |= WINCON0_BPPMODE_24BPP_888;
707 val |= WINCONx_WSWP;
708 val |= WINCONx_BURSTLEN_16WORD;
709 break;
710 case DRM_FORMAT_ARGB8888:
711 case DRM_FORMAT_ABGR8888:
712 default:
713 val |= WINCON1_BPPMODE_25BPP_A1888;
714 val |= WINCONx_WSWP;
715 val |= WINCONx_BURSTLEN_16WORD;
716 break;
717 }
718
719 switch (pixel_format) {
720 case DRM_FORMAT_XBGR1555:
721 case DRM_FORMAT_XBGR8888:
722 case DRM_FORMAT_ABGR8888:
723 case DRM_FORMAT_BGR565:
724 writel(WIN_RGB_ORDER_REVERSE, ctx->regs + WIN_RGB_ORDER(win));
725 break;
726 default:
727 writel(WIN_RGB_ORDER_FORWARD, ctx->regs + WIN_RGB_ORDER(win));
728 break;
729 }
730
731 /*
732 * Setting dma-burst to 16Word causes permanent tearing for very small
733 * buffers, e.g. cursor buffer. Burst Mode switching which based on
734 * plane size is not recommended as plane size varies alot towards the
735 * end of the screen and rapid movement causes unstable DMA, but it is
736 * still better to change dma-burst than displaying garbage.
737 */
738
739 if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
740 val &= ~WINCONx_BURSTLEN_MASK;
741 val |= WINCONx_BURSTLEN_4WORD;
742 }
743 fimd_set_bits(ctx, WINCON(win), ~WINCONx_BLEND_MODE_MASK, val);
744
745 /* hardware window 0 doesn't support alpha channel. */
746 if (win != 0) {
747 fimd_win_set_bldmod(ctx, win, alpha, pixel_alpha);
748 fimd_win_set_bldeq(ctx, win, alpha, pixel_alpha);
749 }
750 }
751
fimd_win_set_colkey(struct fimd_context * ctx,unsigned int win)752 static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win)
753 {
754 unsigned int keycon0 = 0, keycon1 = 0;
755
756 keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
757 WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
758
759 keycon1 = WxKEYCON1_COLVAL(0xffffffff);
760
761 writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
762 writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
763 }
764
765 /**
766 * fimd_shadow_protect_win() - disable updating values from shadow registers at vsync
767 *
768 * @ctx: local driver data
769 * @win: window to protect registers for
770 * @protect: 1 to protect (disable updates)
771 */
fimd_shadow_protect_win(struct fimd_context * ctx,unsigned int win,bool protect)772 static void fimd_shadow_protect_win(struct fimd_context *ctx,
773 unsigned int win, bool protect)
774 {
775 u32 reg, bits, val;
776
777 /*
778 * SHADOWCON/PRTCON register is used for enabling timing.
779 *
780 * for example, once only width value of a register is set,
781 * if the dma is started then fimd hardware could malfunction so
782 * with protect window setting, the register fields with prefix '_F'
783 * wouldn't be updated at vsync also but updated once unprotect window
784 * is set.
785 */
786
787 if (ctx->driver_data->has_shadowcon) {
788 reg = SHADOWCON;
789 bits = SHADOWCON_WINx_PROTECT(win);
790 } else {
791 reg = PRTCON;
792 bits = PRTCON_PROTECT;
793 }
794
795 val = readl(ctx->regs + reg);
796 if (protect)
797 val |= bits;
798 else
799 val &= ~bits;
800 writel(val, ctx->regs + reg);
801 }
802
fimd_atomic_begin(struct exynos_drm_crtc * crtc)803 static void fimd_atomic_begin(struct exynos_drm_crtc *crtc)
804 {
805 struct fimd_context *ctx = crtc->ctx;
806 int i;
807
808 if (ctx->suspended)
809 return;
810
811 for (i = 0; i < WINDOWS_NR; i++)
812 fimd_shadow_protect_win(ctx, i, true);
813 }
814
fimd_atomic_flush(struct exynos_drm_crtc * crtc)815 static void fimd_atomic_flush(struct exynos_drm_crtc *crtc)
816 {
817 struct fimd_context *ctx = crtc->ctx;
818 int i;
819
820 if (ctx->suspended)
821 return;
822
823 for (i = 0; i < WINDOWS_NR; i++)
824 fimd_shadow_protect_win(ctx, i, false);
825
826 exynos_crtc_handle_event(crtc);
827 }
828
fimd_update_plane(struct exynos_drm_crtc * crtc,struct exynos_drm_plane * plane)829 static void fimd_update_plane(struct exynos_drm_crtc *crtc,
830 struct exynos_drm_plane *plane)
831 {
832 struct exynos_drm_plane_state *state =
833 to_exynos_plane_state(plane->base.state);
834 struct fimd_context *ctx = crtc->ctx;
835 struct drm_framebuffer *fb = state->base.fb;
836 dma_addr_t dma_addr;
837 unsigned long val, size, offset;
838 unsigned int last_x, last_y, buf_offsize, line_size;
839 unsigned int win = plane->index;
840 unsigned int cpp = fb->format->cpp[0];
841 unsigned int pitch = fb->pitches[0];
842
843 if (ctx->suspended)
844 return;
845
846 offset = state->src.x * cpp;
847 offset += state->src.y * pitch;
848
849 /* buffer start address */
850 dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset;
851 val = (unsigned long)dma_addr;
852 writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
853
854 /* buffer end address */
855 size = pitch * state->crtc.h;
856 val = (unsigned long)(dma_addr + size);
857 writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
858
859 DRM_DEV_DEBUG_KMS(ctx->dev,
860 "start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
861 (unsigned long)dma_addr, val, size);
862 DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n",
863 state->crtc.w, state->crtc.h);
864
865 /* buffer size */
866 buf_offsize = pitch - (state->crtc.w * cpp);
867 line_size = state->crtc.w * cpp;
868 val = VIDW_BUF_SIZE_OFFSET(buf_offsize) |
869 VIDW_BUF_SIZE_PAGEWIDTH(line_size) |
870 VIDW_BUF_SIZE_OFFSET_E(buf_offsize) |
871 VIDW_BUF_SIZE_PAGEWIDTH_E(line_size);
872 writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0));
873
874 /* OSD position */
875 val = VIDOSDxA_TOPLEFT_X(state->crtc.x) |
876 VIDOSDxA_TOPLEFT_Y(state->crtc.y) |
877 VIDOSDxA_TOPLEFT_X_E(state->crtc.x) |
878 VIDOSDxA_TOPLEFT_Y_E(state->crtc.y);
879 writel(val, ctx->regs + VIDOSD_A(win));
880
881 last_x = state->crtc.x + state->crtc.w;
882 if (last_x)
883 last_x--;
884 last_y = state->crtc.y + state->crtc.h;
885 if (last_y)
886 last_y--;
887
888 val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) |
889 VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y);
890
891 writel(val, ctx->regs + VIDOSD_B(win));
892
893 DRM_DEV_DEBUG_KMS(ctx->dev,
894 "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
895 state->crtc.x, state->crtc.y, last_x, last_y);
896
897 /* OSD size */
898 if (win != 3 && win != 4) {
899 u32 offset = VIDOSD_D(win);
900 if (win == 0)
901 offset = VIDOSD_C(win);
902 val = state->crtc.w * state->crtc.h;
903 writel(val, ctx->regs + offset);
904
905 DRM_DEV_DEBUG_KMS(ctx->dev, "osd size = 0x%x\n",
906 (unsigned int)val);
907 }
908
909 fimd_win_set_pixfmt(ctx, win, fb, state->src.w);
910
911 /* hardware window 0 doesn't support color key. */
912 if (win != 0)
913 fimd_win_set_colkey(ctx, win);
914
915 fimd_enable_video_output(ctx, win, true);
916
917 if (ctx->driver_data->has_shadowcon)
918 fimd_enable_shadow_channel_path(ctx, win, true);
919
920 if (ctx->i80_if)
921 atomic_set(&ctx->win_updated, 1);
922 }
923
fimd_disable_plane(struct exynos_drm_crtc * crtc,struct exynos_drm_plane * plane)924 static void fimd_disable_plane(struct exynos_drm_crtc *crtc,
925 struct exynos_drm_plane *plane)
926 {
927 struct fimd_context *ctx = crtc->ctx;
928 unsigned int win = plane->index;
929
930 if (ctx->suspended)
931 return;
932
933 fimd_enable_video_output(ctx, win, false);
934
935 if (ctx->driver_data->has_shadowcon)
936 fimd_enable_shadow_channel_path(ctx, win, false);
937 }
938
fimd_atomic_enable(struct exynos_drm_crtc * crtc)939 static void fimd_atomic_enable(struct exynos_drm_crtc *crtc)
940 {
941 struct fimd_context *ctx = crtc->ctx;
942
943 if (!ctx->suspended)
944 return;
945
946 ctx->suspended = false;
947
948 if (pm_runtime_resume_and_get(ctx->dev) < 0) {
949 dev_warn(ctx->dev, "failed to enable FIMD device.\n");
950 return;
951 }
952
953 /* if vblank was enabled status, enable it again. */
954 if (test_and_clear_bit(0, &ctx->irq_flags))
955 fimd_enable_vblank(ctx->crtc);
956
957 fimd_commit(ctx->crtc);
958 }
959
fimd_atomic_disable(struct exynos_drm_crtc * crtc)960 static void fimd_atomic_disable(struct exynos_drm_crtc *crtc)
961 {
962 struct fimd_context *ctx = crtc->ctx;
963 int i;
964
965 if (ctx->suspended)
966 return;
967
968 /*
969 * We need to make sure that all windows are disabled before we
970 * suspend that connector. Otherwise we might try to scan from
971 * a destroyed buffer later.
972 */
973 for (i = 0; i < WINDOWS_NR; i++)
974 fimd_disable_plane(crtc, &ctx->planes[i]);
975
976 fimd_enable_vblank(crtc);
977 fimd_wait_for_vblank(crtc);
978 fimd_disable_vblank(crtc);
979
980 writel(0, ctx->regs + VIDCON0);
981
982 pm_runtime_put_sync(ctx->dev);
983 ctx->suspended = true;
984 }
985
fimd_trigger(struct device * dev)986 static void fimd_trigger(struct device *dev)
987 {
988 struct fimd_context *ctx = dev_get_drvdata(dev);
989 const struct fimd_driver_data *driver_data = ctx->driver_data;
990 void *timing_base = ctx->regs + driver_data->timing_base;
991 u32 reg;
992
993 /*
994 * Skips triggering if in triggering state, because multiple triggering
995 * requests can cause panel reset.
996 */
997 if (atomic_read(&ctx->triggering))
998 return;
999
1000 /* Enters triggering mode */
1001 atomic_set(&ctx->triggering, 1);
1002
1003 reg = readl(timing_base + TRIGCON);
1004 reg |= (TRGMODE_ENABLE | SWTRGCMD_ENABLE);
1005 writel(reg, timing_base + TRIGCON);
1006
1007 /*
1008 * Exits triggering mode if vblank is not enabled yet, because when the
1009 * VIDINTCON0 register is not set, it can not exit from triggering mode.
1010 */
1011 if (!test_bit(0, &ctx->irq_flags))
1012 atomic_set(&ctx->triggering, 0);
1013 }
1014
fimd_te_handler(struct exynos_drm_crtc * crtc)1015 static void fimd_te_handler(struct exynos_drm_crtc *crtc)
1016 {
1017 struct fimd_context *ctx = crtc->ctx;
1018 u32 trg_type = ctx->driver_data->trg_type;
1019
1020 /* Checks the crtc is detached already from encoder */
1021 if (!ctx->drm_dev)
1022 return;
1023
1024 if (trg_type == I80_HW_TRG)
1025 goto out;
1026
1027 /*
1028 * If there is a page flip request, triggers and handles the page flip
1029 * event so that current fb can be updated into panel GRAM.
1030 */
1031 if (atomic_add_unless(&ctx->win_updated, -1, 0))
1032 fimd_trigger(ctx->dev);
1033
1034 out:
1035 /* Wakes up vsync event queue */
1036 if (atomic_read(&ctx->wait_vsync_event)) {
1037 atomic_set(&ctx->wait_vsync_event, 0);
1038 wake_up(&ctx->wait_vsync_queue);
1039 }
1040
1041 if (test_bit(0, &ctx->irq_flags))
1042 drm_crtc_handle_vblank(&ctx->crtc->base);
1043 }
1044
fimd_dp_clock_enable(struct exynos_drm_clk * clk,bool enable)1045 static void fimd_dp_clock_enable(struct exynos_drm_clk *clk, bool enable)
1046 {
1047 struct fimd_context *ctx = container_of(clk, struct fimd_context,
1048 dp_clk);
1049 u32 val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;
1050 writel(val, ctx->regs + DP_MIE_CLKCON);
1051 }
1052
1053 static const struct exynos_drm_crtc_ops fimd_crtc_ops = {
1054 .atomic_enable = fimd_atomic_enable,
1055 .atomic_disable = fimd_atomic_disable,
1056 .enable_vblank = fimd_enable_vblank,
1057 .disable_vblank = fimd_disable_vblank,
1058 .atomic_begin = fimd_atomic_begin,
1059 .update_plane = fimd_update_plane,
1060 .disable_plane = fimd_disable_plane,
1061 .atomic_flush = fimd_atomic_flush,
1062 .atomic_check = fimd_atomic_check,
1063 .te_handler = fimd_te_handler,
1064 };
1065
fimd_irq_handler(int irq,void * dev_id)1066 static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
1067 {
1068 struct fimd_context *ctx = (struct fimd_context *)dev_id;
1069 u32 val, clear_bit;
1070
1071 val = readl(ctx->regs + VIDINTCON1);
1072
1073 clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
1074 if (val & clear_bit)
1075 writel(clear_bit, ctx->regs + VIDINTCON1);
1076
1077 /* check the crtc is detached already from encoder */
1078 if (!ctx->drm_dev)
1079 goto out;
1080
1081 if (!ctx->i80_if)
1082 drm_crtc_handle_vblank(&ctx->crtc->base);
1083
1084 if (ctx->i80_if) {
1085 /* Exits triggering mode */
1086 atomic_set(&ctx->triggering, 0);
1087 } else {
1088 /* set wait vsync event to zero and wake up queue. */
1089 if (atomic_read(&ctx->wait_vsync_event)) {
1090 atomic_set(&ctx->wait_vsync_event, 0);
1091 wake_up(&ctx->wait_vsync_queue);
1092 }
1093 }
1094
1095 out:
1096 return IRQ_HANDLED;
1097 }
1098
fimd_bind(struct device * dev,struct device * master,void * data)1099 static int fimd_bind(struct device *dev, struct device *master, void *data)
1100 {
1101 struct fimd_context *ctx = dev_get_drvdata(dev);
1102 struct drm_device *drm_dev = data;
1103 struct exynos_drm_plane *exynos_plane;
1104 unsigned int i;
1105 int ret;
1106
1107 ctx->drm_dev = drm_dev;
1108
1109 for (i = 0; i < WINDOWS_NR; i++) {
1110 if (ctx->driver_data->has_bgr_support) {
1111 ctx->configs[i].pixel_formats = fimd_extended_formats;
1112 ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_extended_formats);
1113 } else {
1114 ctx->configs[i].pixel_formats = fimd_formats;
1115 ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats);
1116 }
1117
1118 ctx->configs[i].zpos = i;
1119 ctx->configs[i].type = fimd_win_types[i];
1120 ctx->configs[i].capabilities = capabilities[i];
1121 ret = exynos_plane_init(drm_dev, &ctx->planes[i], i,
1122 &ctx->configs[i]);
1123 if (ret)
1124 return ret;
1125 }
1126
1127 exynos_plane = &ctx->planes[DEFAULT_WIN];
1128 ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
1129 EXYNOS_DISPLAY_TYPE_LCD, &fimd_crtc_ops, ctx);
1130 if (IS_ERR(ctx->crtc))
1131 return PTR_ERR(ctx->crtc);
1132
1133 if (ctx->driver_data->has_dp_clk) {
1134 ctx->dp_clk.enable = fimd_dp_clock_enable;
1135 ctx->crtc->pipe_clk = &ctx->dp_clk;
1136 }
1137
1138 if (ctx->encoder)
1139 exynos_dpi_bind(drm_dev, ctx->encoder);
1140
1141 if (is_drm_iommu_supported(drm_dev)) {
1142 int ret;
1143
1144 ret = fimd_clear_channels(ctx->crtc);
1145 if (ret < 0)
1146 return ret;
1147 }
1148
1149 return exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv);
1150 }
1151
fimd_unbind(struct device * dev,struct device * master,void * data)1152 static void fimd_unbind(struct device *dev, struct device *master,
1153 void *data)
1154 {
1155 struct fimd_context *ctx = dev_get_drvdata(dev);
1156
1157 fimd_atomic_disable(ctx->crtc);
1158
1159 exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv);
1160
1161 if (ctx->encoder)
1162 exynos_dpi_remove(ctx->encoder);
1163 }
1164
1165 static const struct component_ops fimd_component_ops = {
1166 .bind = fimd_bind,
1167 .unbind = fimd_unbind,
1168 };
1169
fimd_probe(struct platform_device * pdev)1170 static int fimd_probe(struct platform_device *pdev)
1171 {
1172 struct device *dev = &pdev->dev;
1173 struct fimd_context *ctx;
1174 struct device_node *i80_if_timings;
1175 int ret;
1176
1177 if (!dev->of_node)
1178 return -ENODEV;
1179
1180 ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
1181 if (!ctx)
1182 return -ENOMEM;
1183
1184 ctx->dev = dev;
1185 ctx->suspended = true;
1186 ctx->driver_data = of_device_get_match_data(dev);
1187
1188 if (of_property_read_bool(dev->of_node, "samsung,invert-vden"))
1189 ctx->vidcon1 |= VIDCON1_INV_VDEN;
1190 if (of_property_read_bool(dev->of_node, "samsung,invert-vclk"))
1191 ctx->vidcon1 |= VIDCON1_INV_VCLK;
1192
1193 i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
1194 if (i80_if_timings) {
1195 u32 val;
1196
1197 ctx->i80_if = true;
1198
1199 if (ctx->driver_data->has_vidoutcon)
1200 ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0;
1201 else
1202 ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0;
1203 /*
1204 * The user manual describes that this "DSI_EN" bit is required
1205 * to enable I80 24-bit data interface.
1206 */
1207 ctx->vidcon0 |= VIDCON0_DSI_EN;
1208
1209 if (of_property_read_u32(i80_if_timings, "cs-setup", &val))
1210 val = 0;
1211 ctx->i80ifcon = LCD_CS_SETUP(val);
1212 if (of_property_read_u32(i80_if_timings, "wr-setup", &val))
1213 val = 0;
1214 ctx->i80ifcon |= LCD_WR_SETUP(val);
1215 if (of_property_read_u32(i80_if_timings, "wr-active", &val))
1216 val = 1;
1217 ctx->i80ifcon |= LCD_WR_ACTIVE(val);
1218 if (of_property_read_u32(i80_if_timings, "wr-hold", &val))
1219 val = 0;
1220 ctx->i80ifcon |= LCD_WR_HOLD(val);
1221 }
1222 of_node_put(i80_if_timings);
1223
1224 ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
1225 "samsung,sysreg");
1226 if (IS_ERR(ctx->sysreg)) {
1227 dev_warn(dev, "failed to get system register.\n");
1228 ctx->sysreg = NULL;
1229 }
1230
1231 ctx->bus_clk = devm_clk_get(dev, "fimd");
1232 if (IS_ERR(ctx->bus_clk)) {
1233 dev_err(dev, "failed to get bus clock\n");
1234 return PTR_ERR(ctx->bus_clk);
1235 }
1236
1237 ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd");
1238 if (IS_ERR(ctx->lcd_clk)) {
1239 dev_err(dev, "failed to get lcd clock\n");
1240 return PTR_ERR(ctx->lcd_clk);
1241 }
1242
1243 ctx->regs = devm_platform_ioremap_resource(pdev, 0);
1244 if (IS_ERR(ctx->regs))
1245 return PTR_ERR(ctx->regs);
1246
1247 ret = platform_get_irq_byname(pdev, ctx->i80_if ? "lcd_sys" : "vsync");
1248 if (ret < 0)
1249 return ret;
1250
1251 ret = devm_request_irq(dev, ret, fimd_irq_handler, 0, "drm_fimd", ctx);
1252 if (ret) {
1253 dev_err(dev, "irq request failed.\n");
1254 return ret;
1255 }
1256
1257 init_waitqueue_head(&ctx->wait_vsync_queue);
1258 atomic_set(&ctx->wait_vsync_event, 0);
1259
1260 platform_set_drvdata(pdev, ctx);
1261
1262 ctx->encoder = exynos_dpi_probe(dev);
1263 if (IS_ERR(ctx->encoder))
1264 return PTR_ERR(ctx->encoder);
1265
1266 pm_runtime_enable(dev);
1267
1268 ret = component_add(dev, &fimd_component_ops);
1269 if (ret)
1270 goto err_disable_pm_runtime;
1271
1272 return ret;
1273
1274 err_disable_pm_runtime:
1275 pm_runtime_disable(dev);
1276
1277 return ret;
1278 }
1279
fimd_remove(struct platform_device * pdev)1280 static int fimd_remove(struct platform_device *pdev)
1281 {
1282 pm_runtime_disable(&pdev->dev);
1283
1284 component_del(&pdev->dev, &fimd_component_ops);
1285
1286 return 0;
1287 }
1288
exynos_fimd_suspend(struct device * dev)1289 static int exynos_fimd_suspend(struct device *dev)
1290 {
1291 struct fimd_context *ctx = dev_get_drvdata(dev);
1292
1293 clk_disable_unprepare(ctx->lcd_clk);
1294 clk_disable_unprepare(ctx->bus_clk);
1295
1296 return 0;
1297 }
1298
exynos_fimd_resume(struct device * dev)1299 static int exynos_fimd_resume(struct device *dev)
1300 {
1301 struct fimd_context *ctx = dev_get_drvdata(dev);
1302 int ret;
1303
1304 ret = clk_prepare_enable(ctx->bus_clk);
1305 if (ret < 0) {
1306 DRM_DEV_ERROR(dev,
1307 "Failed to prepare_enable the bus clk [%d]\n",
1308 ret);
1309 return ret;
1310 }
1311
1312 ret = clk_prepare_enable(ctx->lcd_clk);
1313 if (ret < 0) {
1314 DRM_DEV_ERROR(dev,
1315 "Failed to prepare_enable the lcd clk [%d]\n",
1316 ret);
1317 return ret;
1318 }
1319
1320 return 0;
1321 }
1322
1323 static DEFINE_RUNTIME_DEV_PM_OPS(exynos_fimd_pm_ops, exynos_fimd_suspend,
1324 exynos_fimd_resume, NULL);
1325
1326 struct platform_driver fimd_driver = {
1327 .probe = fimd_probe,
1328 .remove = fimd_remove,
1329 .driver = {
1330 .name = "exynos4-fb",
1331 .owner = THIS_MODULE,
1332 .pm = pm_ptr(&exynos_fimd_pm_ops),
1333 .of_match_table = fimd_driver_dt_match,
1334 },
1335 };
1336