1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* drivers/gpu/drm/exynos/exynos7_drm_decon.c
3  *
4  * Copyright (C) 2014 Samsung Electronics Co.Ltd
5  * Authors:
6  *	Akshu Agarwal <akshua@gmail.com>
7  *	Ajay Kumar <ajaykumar.rs@samsung.com>
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/component.h>
12 #include <linux/kernel.h>
13 #include <linux/of.h>
14 #include <linux/of_address.h>
15 #include <linux/of_device.h>
16 #include <linux/platform_device.h>
17 #include <linux/pm_runtime.h>
18 
19 #include <video/of_display_timing.h>
20 #include <video/of_videomode.h>
21 
22 #include <drm/drm_fourcc.h>
23 #include <drm/drm_vblank.h>
24 #include <drm/exynos_drm.h>
25 
26 #include "exynos_drm_crtc.h"
27 #include "exynos_drm_drv.h"
28 #include "exynos_drm_fb.h"
29 #include "exynos_drm_plane.h"
30 #include "regs-decon7.h"
31 
32 /*
33  * DECON stands for Display and Enhancement controller.
34  */
35 
36 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128
37 
38 #define WINDOWS_NR	2
39 
40 struct decon_context {
41 	struct device			*dev;
42 	struct drm_device		*drm_dev;
43 	void				*dma_priv;
44 	struct exynos_drm_crtc		*crtc;
45 	struct exynos_drm_plane		planes[WINDOWS_NR];
46 	struct exynos_drm_plane_config	configs[WINDOWS_NR];
47 	struct clk			*pclk;
48 	struct clk			*aclk;
49 	struct clk			*eclk;
50 	struct clk			*vclk;
51 	void __iomem			*regs;
52 	unsigned long			irq_flags;
53 	bool				i80_if;
54 	bool				suspended;
55 	wait_queue_head_t		wait_vsync_queue;
56 	atomic_t			wait_vsync_event;
57 
58 	struct drm_encoder *encoder;
59 };
60 
61 static const struct of_device_id decon_driver_dt_match[] = {
62 	{.compatible = "samsung,exynos7-decon"},
63 	{},
64 };
65 MODULE_DEVICE_TABLE(of, decon_driver_dt_match);
66 
67 static const uint32_t decon_formats[] = {
68 	DRM_FORMAT_RGB565,
69 	DRM_FORMAT_XRGB8888,
70 	DRM_FORMAT_XBGR8888,
71 	DRM_FORMAT_RGBX8888,
72 	DRM_FORMAT_BGRX8888,
73 	DRM_FORMAT_ARGB8888,
74 	DRM_FORMAT_ABGR8888,
75 	DRM_FORMAT_RGBA8888,
76 	DRM_FORMAT_BGRA8888,
77 };
78 
79 static const enum drm_plane_type decon_win_types[WINDOWS_NR] = {
80 	DRM_PLANE_TYPE_PRIMARY,
81 	DRM_PLANE_TYPE_CURSOR,
82 };
83 
84 static void decon_wait_for_vblank(struct exynos_drm_crtc *crtc)
85 {
86 	struct decon_context *ctx = crtc->ctx;
87 
88 	if (ctx->suspended)
89 		return;
90 
91 	atomic_set(&ctx->wait_vsync_event, 1);
92 
93 	/*
94 	 * wait for DECON to signal VSYNC interrupt or return after
95 	 * timeout which is set to 50ms (refresh rate of 20).
96 	 */
97 	if (!wait_event_timeout(ctx->wait_vsync_queue,
98 				!atomic_read(&ctx->wait_vsync_event),
99 				HZ/20))
100 		DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n");
101 }
102 
103 static void decon_clear_channels(struct exynos_drm_crtc *crtc)
104 {
105 	struct decon_context *ctx = crtc->ctx;
106 	unsigned int win, ch_enabled = 0;
107 
108 	/* Check if any channel is enabled. */
109 	for (win = 0; win < WINDOWS_NR; win++) {
110 		u32 val = readl(ctx->regs + WINCON(win));
111 
112 		if (val & WINCONx_ENWIN) {
113 			val &= ~WINCONx_ENWIN;
114 			writel(val, ctx->regs + WINCON(win));
115 			ch_enabled = 1;
116 		}
117 	}
118 
119 	/* Wait for vsync, as disable channel takes effect at next vsync */
120 	if (ch_enabled)
121 		decon_wait_for_vblank(ctx->crtc);
122 }
123 
124 static int decon_ctx_initialize(struct decon_context *ctx,
125 			struct drm_device *drm_dev)
126 {
127 	ctx->drm_dev = drm_dev;
128 
129 	decon_clear_channels(ctx->crtc);
130 
131 	return exynos_drm_register_dma(drm_dev, ctx->dev, &ctx->dma_priv);
132 }
133 
134 static void decon_ctx_remove(struct decon_context *ctx)
135 {
136 	/* detach this sub driver from iommu mapping if supported. */
137 	exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv);
138 }
139 
140 static u32 decon_calc_clkdiv(struct decon_context *ctx,
141 		const struct drm_display_mode *mode)
142 {
143 	unsigned long ideal_clk = mode->clock;
144 	u32 clkdiv;
145 
146 	/* Find the clock divider value that gets us closest to ideal_clk */
147 	clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->vclk), ideal_clk);
148 
149 	return (clkdiv < 0x100) ? clkdiv : 0xff;
150 }
151 
152 static void decon_commit(struct exynos_drm_crtc *crtc)
153 {
154 	struct decon_context *ctx = crtc->ctx;
155 	struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
156 	u32 val, clkdiv;
157 
158 	if (ctx->suspended)
159 		return;
160 
161 	/* nothing to do if we haven't set the mode yet */
162 	if (mode->htotal == 0 || mode->vtotal == 0)
163 		return;
164 
165 	if (!ctx->i80_if) {
166 		int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
167 	      /* setup vertical timing values. */
168 		vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
169 		vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
170 		vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
171 
172 		val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1);
173 		writel(val, ctx->regs + VIDTCON0);
174 
175 		val = VIDTCON1_VSPW(vsync_len - 1);
176 		writel(val, ctx->regs + VIDTCON1);
177 
178 		/* setup horizontal timing values.  */
179 		hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
180 		hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
181 		hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
182 
183 		/* setup horizontal timing values.  */
184 		val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1);
185 		writel(val, ctx->regs + VIDTCON2);
186 
187 		val = VIDTCON3_HSPW(hsync_len - 1);
188 		writel(val, ctx->regs + VIDTCON3);
189 	}
190 
191 	/* setup horizontal and vertical display size. */
192 	val = VIDTCON4_LINEVAL(mode->vdisplay - 1) |
193 	       VIDTCON4_HOZVAL(mode->hdisplay - 1);
194 	writel(val, ctx->regs + VIDTCON4);
195 
196 	writel(mode->vdisplay - 1, ctx->regs + LINECNT_OP_THRESHOLD);
197 
198 	/*
199 	 * fields of register with prefix '_F' would be updated
200 	 * at vsync(same as dma start)
201 	 */
202 	val = VIDCON0_ENVID | VIDCON0_ENVID_F;
203 	writel(val, ctx->regs + VIDCON0);
204 
205 	clkdiv = decon_calc_clkdiv(ctx, mode);
206 	if (clkdiv > 1) {
207 		val = VCLKCON1_CLKVAL_NUM_VCLK(clkdiv - 1);
208 		writel(val, ctx->regs + VCLKCON1);
209 		writel(val, ctx->regs + VCLKCON2);
210 	}
211 
212 	val = readl(ctx->regs + DECON_UPDATE);
213 	val |= DECON_UPDATE_STANDALONE_F;
214 	writel(val, ctx->regs + DECON_UPDATE);
215 }
216 
217 static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
218 {
219 	struct decon_context *ctx = crtc->ctx;
220 	u32 val;
221 
222 	if (ctx->suspended)
223 		return -EPERM;
224 
225 	if (!test_and_set_bit(0, &ctx->irq_flags)) {
226 		val = readl(ctx->regs + VIDINTCON0);
227 
228 		val |= VIDINTCON0_INT_ENABLE;
229 
230 		if (!ctx->i80_if) {
231 			val |= VIDINTCON0_INT_FRAME;
232 			val &= ~VIDINTCON0_FRAMESEL0_MASK;
233 			val |= VIDINTCON0_FRAMESEL0_VSYNC;
234 		}
235 
236 		writel(val, ctx->regs + VIDINTCON0);
237 	}
238 
239 	return 0;
240 }
241 
242 static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
243 {
244 	struct decon_context *ctx = crtc->ctx;
245 	u32 val;
246 
247 	if (ctx->suspended)
248 		return;
249 
250 	if (test_and_clear_bit(0, &ctx->irq_flags)) {
251 		val = readl(ctx->regs + VIDINTCON0);
252 
253 		val &= ~VIDINTCON0_INT_ENABLE;
254 		if (!ctx->i80_if)
255 			val &= ~VIDINTCON0_INT_FRAME;
256 
257 		writel(val, ctx->regs + VIDINTCON0);
258 	}
259 }
260 
261 static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win,
262 				 struct drm_framebuffer *fb)
263 {
264 	unsigned long val;
265 	int padding;
266 
267 	val = readl(ctx->regs + WINCON(win));
268 	val &= ~WINCONx_BPPMODE_MASK;
269 
270 	switch (fb->format->format) {
271 	case DRM_FORMAT_RGB565:
272 		val |= WINCONx_BPPMODE_16BPP_565;
273 		val |= WINCONx_BURSTLEN_16WORD;
274 		break;
275 	case DRM_FORMAT_XRGB8888:
276 		val |= WINCONx_BPPMODE_24BPP_xRGB;
277 		val |= WINCONx_BURSTLEN_16WORD;
278 		break;
279 	case DRM_FORMAT_XBGR8888:
280 		val |= WINCONx_BPPMODE_24BPP_xBGR;
281 		val |= WINCONx_BURSTLEN_16WORD;
282 		break;
283 	case DRM_FORMAT_RGBX8888:
284 		val |= WINCONx_BPPMODE_24BPP_RGBx;
285 		val |= WINCONx_BURSTLEN_16WORD;
286 		break;
287 	case DRM_FORMAT_BGRX8888:
288 		val |= WINCONx_BPPMODE_24BPP_BGRx;
289 		val |= WINCONx_BURSTLEN_16WORD;
290 		break;
291 	case DRM_FORMAT_ARGB8888:
292 		val |= WINCONx_BPPMODE_32BPP_ARGB | WINCONx_BLD_PIX |
293 			WINCONx_ALPHA_SEL;
294 		val |= WINCONx_BURSTLEN_16WORD;
295 		break;
296 	case DRM_FORMAT_ABGR8888:
297 		val |= WINCONx_BPPMODE_32BPP_ABGR | WINCONx_BLD_PIX |
298 			WINCONx_ALPHA_SEL;
299 		val |= WINCONx_BURSTLEN_16WORD;
300 		break;
301 	case DRM_FORMAT_RGBA8888:
302 		val |= WINCONx_BPPMODE_32BPP_RGBA | WINCONx_BLD_PIX |
303 			WINCONx_ALPHA_SEL;
304 		val |= WINCONx_BURSTLEN_16WORD;
305 		break;
306 	case DRM_FORMAT_BGRA8888:
307 	default:
308 		val |= WINCONx_BPPMODE_32BPP_BGRA | WINCONx_BLD_PIX |
309 			WINCONx_ALPHA_SEL;
310 		val |= WINCONx_BURSTLEN_16WORD;
311 		break;
312 	}
313 
314 	DRM_DEV_DEBUG_KMS(ctx->dev, "cpp = %d\n", fb->format->cpp[0]);
315 
316 	/*
317 	 * In case of exynos, setting dma-burst to 16Word causes permanent
318 	 * tearing for very small buffers, e.g. cursor buffer. Burst Mode
319 	 * switching which is based on plane size is not recommended as
320 	 * plane size varies a lot towards the end of the screen and rapid
321 	 * movement causes unstable DMA which results into iommu crash/tear.
322 	 */
323 
324 	padding = (fb->pitches[0] / fb->format->cpp[0]) - fb->width;
325 	if (fb->width + padding < MIN_FB_WIDTH_FOR_16WORD_BURST) {
326 		val &= ~WINCONx_BURSTLEN_MASK;
327 		val |= WINCONx_BURSTLEN_8WORD;
328 	}
329 
330 	writel(val, ctx->regs + WINCON(win));
331 }
332 
333 static void decon_win_set_colkey(struct decon_context *ctx, unsigned int win)
334 {
335 	unsigned int keycon0 = 0, keycon1 = 0;
336 
337 	keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
338 			WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
339 
340 	keycon1 = WxKEYCON1_COLVAL(0xffffffff);
341 
342 	writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
343 	writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
344 }
345 
346 /**
347  * decon_shadow_protect_win() - disable updating values from shadow registers at vsync
348  *
349  * @ctx: display and enhancement controller context
350  * @win: window to protect registers for
351  * @protect: 1 to protect (disable updates)
352  */
353 static void decon_shadow_protect_win(struct decon_context *ctx,
354 				     unsigned int win, bool protect)
355 {
356 	u32 bits, val;
357 
358 	bits = SHADOWCON_WINx_PROTECT(win);
359 
360 	val = readl(ctx->regs + SHADOWCON);
361 	if (protect)
362 		val |= bits;
363 	else
364 		val &= ~bits;
365 	writel(val, ctx->regs + SHADOWCON);
366 }
367 
368 static void decon_atomic_begin(struct exynos_drm_crtc *crtc)
369 {
370 	struct decon_context *ctx = crtc->ctx;
371 	int i;
372 
373 	if (ctx->suspended)
374 		return;
375 
376 	for (i = 0; i < WINDOWS_NR; i++)
377 		decon_shadow_protect_win(ctx, i, true);
378 }
379 
380 static void decon_update_plane(struct exynos_drm_crtc *crtc,
381 			       struct exynos_drm_plane *plane)
382 {
383 	struct exynos_drm_plane_state *state =
384 				to_exynos_plane_state(plane->base.state);
385 	struct decon_context *ctx = crtc->ctx;
386 	struct drm_framebuffer *fb = state->base.fb;
387 	int padding;
388 	unsigned long val, alpha;
389 	unsigned int last_x;
390 	unsigned int last_y;
391 	unsigned int win = plane->index;
392 	unsigned int cpp = fb->format->cpp[0];
393 	unsigned int pitch = fb->pitches[0];
394 
395 	if (ctx->suspended)
396 		return;
397 
398 	/*
399 	 * SHADOWCON/PRTCON register is used for enabling timing.
400 	 *
401 	 * for example, once only width value of a register is set,
402 	 * if the dma is started then decon hardware could malfunction so
403 	 * with protect window setting, the register fields with prefix '_F'
404 	 * wouldn't be updated at vsync also but updated once unprotect window
405 	 * is set.
406 	 */
407 
408 	/* buffer start address */
409 	val = (unsigned long)exynos_drm_fb_dma_addr(fb, 0);
410 	writel(val, ctx->regs + VIDW_BUF_START(win));
411 
412 	padding = (pitch / cpp) - fb->width;
413 
414 	/* buffer size */
415 	writel(fb->width + padding, ctx->regs + VIDW_WHOLE_X(win));
416 	writel(fb->height, ctx->regs + VIDW_WHOLE_Y(win));
417 
418 	/* offset from the start of the buffer to read */
419 	writel(state->src.x, ctx->regs + VIDW_OFFSET_X(win));
420 	writel(state->src.y, ctx->regs + VIDW_OFFSET_Y(win));
421 
422 	DRM_DEV_DEBUG_KMS(ctx->dev, "start addr = 0x%lx\n",
423 			(unsigned long)val);
424 	DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n",
425 			state->crtc.w, state->crtc.h);
426 
427 	val = VIDOSDxA_TOPLEFT_X(state->crtc.x) |
428 		VIDOSDxA_TOPLEFT_Y(state->crtc.y);
429 	writel(val, ctx->regs + VIDOSD_A(win));
430 
431 	last_x = state->crtc.x + state->crtc.w;
432 	if (last_x)
433 		last_x--;
434 	last_y = state->crtc.y + state->crtc.h;
435 	if (last_y)
436 		last_y--;
437 
438 	val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y);
439 
440 	writel(val, ctx->regs + VIDOSD_B(win));
441 
442 	DRM_DEV_DEBUG_KMS(ctx->dev, "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
443 			state->crtc.x, state->crtc.y, last_x, last_y);
444 
445 	/* OSD alpha */
446 	alpha = VIDOSDxC_ALPHA0_R_F(0x0) |
447 			VIDOSDxC_ALPHA0_G_F(0x0) |
448 			VIDOSDxC_ALPHA0_B_F(0x0);
449 
450 	writel(alpha, ctx->regs + VIDOSD_C(win));
451 
452 	alpha = VIDOSDxD_ALPHA1_R_F(0xff) |
453 			VIDOSDxD_ALPHA1_G_F(0xff) |
454 			VIDOSDxD_ALPHA1_B_F(0xff);
455 
456 	writel(alpha, ctx->regs + VIDOSD_D(win));
457 
458 	decon_win_set_pixfmt(ctx, win, fb);
459 
460 	/* hardware window 0 doesn't support color key. */
461 	if (win != 0)
462 		decon_win_set_colkey(ctx, win);
463 
464 	/* wincon */
465 	val = readl(ctx->regs + WINCON(win));
466 	val |= WINCONx_TRIPLE_BUF_MODE;
467 	val |= WINCONx_ENWIN;
468 	writel(val, ctx->regs + WINCON(win));
469 
470 	/* Enable DMA channel and unprotect windows */
471 	decon_shadow_protect_win(ctx, win, false);
472 
473 	val = readl(ctx->regs + DECON_UPDATE);
474 	val |= DECON_UPDATE_STANDALONE_F;
475 	writel(val, ctx->regs + DECON_UPDATE);
476 }
477 
478 static void decon_disable_plane(struct exynos_drm_crtc *crtc,
479 				struct exynos_drm_plane *plane)
480 {
481 	struct decon_context *ctx = crtc->ctx;
482 	unsigned int win = plane->index;
483 	u32 val;
484 
485 	if (ctx->suspended)
486 		return;
487 
488 	/* protect windows */
489 	decon_shadow_protect_win(ctx, win, true);
490 
491 	/* wincon */
492 	val = readl(ctx->regs + WINCON(win));
493 	val &= ~WINCONx_ENWIN;
494 	writel(val, ctx->regs + WINCON(win));
495 
496 	val = readl(ctx->regs + DECON_UPDATE);
497 	val |= DECON_UPDATE_STANDALONE_F;
498 	writel(val, ctx->regs + DECON_UPDATE);
499 }
500 
501 static void decon_atomic_flush(struct exynos_drm_crtc *crtc)
502 {
503 	struct decon_context *ctx = crtc->ctx;
504 	int i;
505 
506 	if (ctx->suspended)
507 		return;
508 
509 	for (i = 0; i < WINDOWS_NR; i++)
510 		decon_shadow_protect_win(ctx, i, false);
511 	exynos_crtc_handle_event(crtc);
512 }
513 
514 static void decon_init(struct decon_context *ctx)
515 {
516 	u32 val;
517 
518 	writel(VIDCON0_SWRESET, ctx->regs + VIDCON0);
519 
520 	val = VIDOUTCON0_DISP_IF_0_ON;
521 	if (!ctx->i80_if)
522 		val |= VIDOUTCON0_RGBIF;
523 	writel(val, ctx->regs + VIDOUTCON0);
524 
525 	writel(VCLKCON0_CLKVALUP | VCLKCON0_VCLKFREE, ctx->regs + VCLKCON0);
526 
527 	if (!ctx->i80_if)
528 		writel(VIDCON1_VCLK_HOLD, ctx->regs + VIDCON1(0));
529 }
530 
531 static void decon_atomic_enable(struct exynos_drm_crtc *crtc)
532 {
533 	struct decon_context *ctx = crtc->ctx;
534 	int ret;
535 
536 	if (!ctx->suspended)
537 		return;
538 
539 	ret = pm_runtime_resume_and_get(ctx->dev);
540 	if (ret < 0) {
541 		DRM_DEV_ERROR(ctx->dev, "failed to enable DECON device.\n");
542 		return;
543 	}
544 
545 	decon_init(ctx);
546 
547 	/* if vblank was enabled status, enable it again. */
548 	if (test_and_clear_bit(0, &ctx->irq_flags))
549 		decon_enable_vblank(ctx->crtc);
550 
551 	decon_commit(ctx->crtc);
552 
553 	ctx->suspended = false;
554 }
555 
556 static void decon_atomic_disable(struct exynos_drm_crtc *crtc)
557 {
558 	struct decon_context *ctx = crtc->ctx;
559 	int i;
560 
561 	if (ctx->suspended)
562 		return;
563 
564 	/*
565 	 * We need to make sure that all windows are disabled before we
566 	 * suspend that connector. Otherwise we might try to scan from
567 	 * a destroyed buffer later.
568 	 */
569 	for (i = 0; i < WINDOWS_NR; i++)
570 		decon_disable_plane(crtc, &ctx->planes[i]);
571 
572 	pm_runtime_put_sync(ctx->dev);
573 
574 	ctx->suspended = true;
575 }
576 
577 static const struct exynos_drm_crtc_ops decon_crtc_ops = {
578 	.atomic_enable = decon_atomic_enable,
579 	.atomic_disable = decon_atomic_disable,
580 	.enable_vblank = decon_enable_vblank,
581 	.disable_vblank = decon_disable_vblank,
582 	.atomic_begin = decon_atomic_begin,
583 	.update_plane = decon_update_plane,
584 	.disable_plane = decon_disable_plane,
585 	.atomic_flush = decon_atomic_flush,
586 };
587 
588 
589 static irqreturn_t decon_irq_handler(int irq, void *dev_id)
590 {
591 	struct decon_context *ctx = (struct decon_context *)dev_id;
592 	u32 val, clear_bit;
593 
594 	val = readl(ctx->regs + VIDINTCON1);
595 
596 	clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
597 	if (val & clear_bit)
598 		writel(clear_bit, ctx->regs + VIDINTCON1);
599 
600 	/* check the crtc is detached already from encoder */
601 	if (!ctx->drm_dev)
602 		goto out;
603 
604 	if (!ctx->i80_if) {
605 		drm_crtc_handle_vblank(&ctx->crtc->base);
606 
607 		/* set wait vsync event to zero and wake up queue. */
608 		if (atomic_read(&ctx->wait_vsync_event)) {
609 			atomic_set(&ctx->wait_vsync_event, 0);
610 			wake_up(&ctx->wait_vsync_queue);
611 		}
612 	}
613 out:
614 	return IRQ_HANDLED;
615 }
616 
617 static int decon_bind(struct device *dev, struct device *master, void *data)
618 {
619 	struct decon_context *ctx = dev_get_drvdata(dev);
620 	struct drm_device *drm_dev = data;
621 	struct exynos_drm_plane *exynos_plane;
622 	unsigned int i;
623 	int ret;
624 
625 	ret = decon_ctx_initialize(ctx, drm_dev);
626 	if (ret) {
627 		DRM_DEV_ERROR(dev, "decon_ctx_initialize failed.\n");
628 		return ret;
629 	}
630 
631 	for (i = 0; i < WINDOWS_NR; i++) {
632 		ctx->configs[i].pixel_formats = decon_formats;
633 		ctx->configs[i].num_pixel_formats = ARRAY_SIZE(decon_formats);
634 		ctx->configs[i].zpos = i;
635 		ctx->configs[i].type = decon_win_types[i];
636 
637 		ret = exynos_plane_init(drm_dev, &ctx->planes[i], i,
638 					&ctx->configs[i]);
639 		if (ret)
640 			return ret;
641 	}
642 
643 	exynos_plane = &ctx->planes[DEFAULT_WIN];
644 	ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
645 			EXYNOS_DISPLAY_TYPE_LCD, &decon_crtc_ops, ctx);
646 	if (IS_ERR(ctx->crtc)) {
647 		decon_ctx_remove(ctx);
648 		return PTR_ERR(ctx->crtc);
649 	}
650 
651 	if (ctx->encoder)
652 		exynos_dpi_bind(drm_dev, ctx->encoder);
653 
654 	return 0;
655 
656 }
657 
658 static void decon_unbind(struct device *dev, struct device *master,
659 			void *data)
660 {
661 	struct decon_context *ctx = dev_get_drvdata(dev);
662 
663 	decon_atomic_disable(ctx->crtc);
664 
665 	if (ctx->encoder)
666 		exynos_dpi_remove(ctx->encoder);
667 
668 	decon_ctx_remove(ctx);
669 }
670 
671 static const struct component_ops decon_component_ops = {
672 	.bind	= decon_bind,
673 	.unbind = decon_unbind,
674 };
675 
676 static int decon_probe(struct platform_device *pdev)
677 {
678 	struct device *dev = &pdev->dev;
679 	struct decon_context *ctx;
680 	struct device_node *i80_if_timings;
681 	struct resource *res;
682 	int ret;
683 
684 	if (!dev->of_node)
685 		return -ENODEV;
686 
687 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
688 	if (!ctx)
689 		return -ENOMEM;
690 
691 	ctx->dev = dev;
692 	ctx->suspended = true;
693 
694 	i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
695 	if (i80_if_timings)
696 		ctx->i80_if = true;
697 	of_node_put(i80_if_timings);
698 
699 	ctx->regs = of_iomap(dev->of_node, 0);
700 	if (!ctx->regs)
701 		return -ENOMEM;
702 
703 	ctx->pclk = devm_clk_get(dev, "pclk_decon0");
704 	if (IS_ERR(ctx->pclk)) {
705 		dev_err(dev, "failed to get bus clock pclk\n");
706 		ret = PTR_ERR(ctx->pclk);
707 		goto err_iounmap;
708 	}
709 
710 	ctx->aclk = devm_clk_get(dev, "aclk_decon0");
711 	if (IS_ERR(ctx->aclk)) {
712 		dev_err(dev, "failed to get bus clock aclk\n");
713 		ret = PTR_ERR(ctx->aclk);
714 		goto err_iounmap;
715 	}
716 
717 	ctx->eclk = devm_clk_get(dev, "decon0_eclk");
718 	if (IS_ERR(ctx->eclk)) {
719 		dev_err(dev, "failed to get eclock\n");
720 		ret = PTR_ERR(ctx->eclk);
721 		goto err_iounmap;
722 	}
723 
724 	ctx->vclk = devm_clk_get(dev, "decon0_vclk");
725 	if (IS_ERR(ctx->vclk)) {
726 		dev_err(dev, "failed to get vclock\n");
727 		ret = PTR_ERR(ctx->vclk);
728 		goto err_iounmap;
729 	}
730 
731 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
732 					   ctx->i80_if ? "lcd_sys" : "vsync");
733 	if (!res) {
734 		dev_err(dev, "irq request failed.\n");
735 		ret = -ENXIO;
736 		goto err_iounmap;
737 	}
738 
739 	ret = devm_request_irq(dev, res->start, decon_irq_handler,
740 							0, "drm_decon", ctx);
741 	if (ret) {
742 		dev_err(dev, "irq request failed.\n");
743 		goto err_iounmap;
744 	}
745 
746 	init_waitqueue_head(&ctx->wait_vsync_queue);
747 	atomic_set(&ctx->wait_vsync_event, 0);
748 
749 	platform_set_drvdata(pdev, ctx);
750 
751 	ctx->encoder = exynos_dpi_probe(dev);
752 	if (IS_ERR(ctx->encoder)) {
753 		ret = PTR_ERR(ctx->encoder);
754 		goto err_iounmap;
755 	}
756 
757 	pm_runtime_enable(dev);
758 
759 	ret = component_add(dev, &decon_component_ops);
760 	if (ret)
761 		goto err_disable_pm_runtime;
762 
763 	return ret;
764 
765 err_disable_pm_runtime:
766 	pm_runtime_disable(dev);
767 
768 err_iounmap:
769 	iounmap(ctx->regs);
770 
771 	return ret;
772 }
773 
774 static int decon_remove(struct platform_device *pdev)
775 {
776 	struct decon_context *ctx = dev_get_drvdata(&pdev->dev);
777 
778 	pm_runtime_disable(&pdev->dev);
779 
780 	iounmap(ctx->regs);
781 
782 	component_del(&pdev->dev, &decon_component_ops);
783 
784 	return 0;
785 }
786 
787 #ifdef CONFIG_PM
788 static int exynos7_decon_suspend(struct device *dev)
789 {
790 	struct decon_context *ctx = dev_get_drvdata(dev);
791 
792 	clk_disable_unprepare(ctx->vclk);
793 	clk_disable_unprepare(ctx->eclk);
794 	clk_disable_unprepare(ctx->aclk);
795 	clk_disable_unprepare(ctx->pclk);
796 
797 	return 0;
798 }
799 
800 static int exynos7_decon_resume(struct device *dev)
801 {
802 	struct decon_context *ctx = dev_get_drvdata(dev);
803 	int ret;
804 
805 	ret = clk_prepare_enable(ctx->pclk);
806 	if (ret < 0) {
807 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the pclk [%d]\n",
808 			      ret);
809 		return ret;
810 	}
811 
812 	ret = clk_prepare_enable(ctx->aclk);
813 	if (ret < 0) {
814 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the aclk [%d]\n",
815 			      ret);
816 		return ret;
817 	}
818 
819 	ret = clk_prepare_enable(ctx->eclk);
820 	if  (ret < 0) {
821 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the eclk [%d]\n",
822 			      ret);
823 		return ret;
824 	}
825 
826 	ret = clk_prepare_enable(ctx->vclk);
827 	if  (ret < 0) {
828 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the vclk [%d]\n",
829 			      ret);
830 		return ret;
831 	}
832 
833 	return 0;
834 }
835 #endif
836 
837 static const struct dev_pm_ops exynos7_decon_pm_ops = {
838 	SET_RUNTIME_PM_OPS(exynos7_decon_suspend, exynos7_decon_resume,
839 			   NULL)
840 	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
841 				pm_runtime_force_resume)
842 };
843 
844 struct platform_driver decon_driver = {
845 	.probe		= decon_probe,
846 	.remove		= decon_remove,
847 	.driver		= {
848 		.name	= "exynos-decon",
849 		.pm	= &exynos7_decon_pm_ops,
850 		.of_match_table = decon_driver_dt_match,
851 	},
852 };
853