1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* drivers/gpu/drm/exynos/exynos7_drm_decon.c
3  *
4  * Copyright (C) 2014 Samsung Electronics Co.Ltd
5  * Authors:
6  *	Akshu Agarwal <akshua@gmail.com>
7  *	Ajay Kumar <ajaykumar.rs@samsung.com>
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/component.h>
12 #include <linux/kernel.h>
13 #include <linux/of.h>
14 #include <linux/of_address.h>
15 #include <linux/of_device.h>
16 #include <linux/platform_device.h>
17 #include <linux/pm_runtime.h>
18 
19 #include <video/of_display_timing.h>
20 #include <video/of_videomode.h>
21 
22 #include <drm/drm_fourcc.h>
23 #include <drm/drm_framebuffer.h>
24 #include <drm/drm_vblank.h>
25 #include <drm/exynos_drm.h>
26 
27 #include "exynos_drm_crtc.h"
28 #include "exynos_drm_drv.h"
29 #include "exynos_drm_fb.h"
30 #include "exynos_drm_plane.h"
31 #include "regs-decon7.h"
32 
33 /*
34  * DECON stands for Display and Enhancement controller.
35  */
36 
37 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128
38 
39 #define WINDOWS_NR	2
40 
41 struct decon_context {
42 	struct device			*dev;
43 	struct drm_device		*drm_dev;
44 	void				*dma_priv;
45 	struct exynos_drm_crtc		*crtc;
46 	struct exynos_drm_plane		planes[WINDOWS_NR];
47 	struct exynos_drm_plane_config	configs[WINDOWS_NR];
48 	struct clk			*pclk;
49 	struct clk			*aclk;
50 	struct clk			*eclk;
51 	struct clk			*vclk;
52 	void __iomem			*regs;
53 	unsigned long			irq_flags;
54 	bool				i80_if;
55 	bool				suspended;
56 	wait_queue_head_t		wait_vsync_queue;
57 	atomic_t			wait_vsync_event;
58 
59 	struct drm_encoder *encoder;
60 };
61 
62 static const struct of_device_id decon_driver_dt_match[] = {
63 	{.compatible = "samsung,exynos7-decon"},
64 	{},
65 };
66 MODULE_DEVICE_TABLE(of, decon_driver_dt_match);
67 
68 static const uint32_t decon_formats[] = {
69 	DRM_FORMAT_RGB565,
70 	DRM_FORMAT_XRGB8888,
71 	DRM_FORMAT_XBGR8888,
72 	DRM_FORMAT_RGBX8888,
73 	DRM_FORMAT_BGRX8888,
74 	DRM_FORMAT_ARGB8888,
75 	DRM_FORMAT_ABGR8888,
76 	DRM_FORMAT_RGBA8888,
77 	DRM_FORMAT_BGRA8888,
78 };
79 
80 static const enum drm_plane_type decon_win_types[WINDOWS_NR] = {
81 	DRM_PLANE_TYPE_PRIMARY,
82 	DRM_PLANE_TYPE_CURSOR,
83 };
84 
85 static void decon_wait_for_vblank(struct exynos_drm_crtc *crtc)
86 {
87 	struct decon_context *ctx = crtc->ctx;
88 
89 	if (ctx->suspended)
90 		return;
91 
92 	atomic_set(&ctx->wait_vsync_event, 1);
93 
94 	/*
95 	 * wait for DECON to signal VSYNC interrupt or return after
96 	 * timeout which is set to 50ms (refresh rate of 20).
97 	 */
98 	if (!wait_event_timeout(ctx->wait_vsync_queue,
99 				!atomic_read(&ctx->wait_vsync_event),
100 				HZ/20))
101 		DRM_DEV_DEBUG_KMS(ctx->dev, "vblank wait timed out.\n");
102 }
103 
104 static void decon_clear_channels(struct exynos_drm_crtc *crtc)
105 {
106 	struct decon_context *ctx = crtc->ctx;
107 	unsigned int win, ch_enabled = 0;
108 
109 	/* Check if any channel is enabled. */
110 	for (win = 0; win < WINDOWS_NR; win++) {
111 		u32 val = readl(ctx->regs + WINCON(win));
112 
113 		if (val & WINCONx_ENWIN) {
114 			val &= ~WINCONx_ENWIN;
115 			writel(val, ctx->regs + WINCON(win));
116 			ch_enabled = 1;
117 		}
118 	}
119 
120 	/* Wait for vsync, as disable channel takes effect at next vsync */
121 	if (ch_enabled)
122 		decon_wait_for_vblank(ctx->crtc);
123 }
124 
125 static int decon_ctx_initialize(struct decon_context *ctx,
126 			struct drm_device *drm_dev)
127 {
128 	ctx->drm_dev = drm_dev;
129 
130 	decon_clear_channels(ctx->crtc);
131 
132 	return exynos_drm_register_dma(drm_dev, ctx->dev, &ctx->dma_priv);
133 }
134 
135 static void decon_ctx_remove(struct decon_context *ctx)
136 {
137 	/* detach this sub driver from iommu mapping if supported. */
138 	exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv);
139 }
140 
141 static u32 decon_calc_clkdiv(struct decon_context *ctx,
142 		const struct drm_display_mode *mode)
143 {
144 	unsigned long ideal_clk = mode->clock;
145 	u32 clkdiv;
146 
147 	/* Find the clock divider value that gets us closest to ideal_clk */
148 	clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->vclk), ideal_clk);
149 
150 	return (clkdiv < 0x100) ? clkdiv : 0xff;
151 }
152 
153 static void decon_commit(struct exynos_drm_crtc *crtc)
154 {
155 	struct decon_context *ctx = crtc->ctx;
156 	struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
157 	u32 val, clkdiv;
158 
159 	if (ctx->suspended)
160 		return;
161 
162 	/* nothing to do if we haven't set the mode yet */
163 	if (mode->htotal == 0 || mode->vtotal == 0)
164 		return;
165 
166 	if (!ctx->i80_if) {
167 		int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
168 	      /* setup vertical timing values. */
169 		vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
170 		vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
171 		vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
172 
173 		val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1);
174 		writel(val, ctx->regs + VIDTCON0);
175 
176 		val = VIDTCON1_VSPW(vsync_len - 1);
177 		writel(val, ctx->regs + VIDTCON1);
178 
179 		/* setup horizontal timing values.  */
180 		hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
181 		hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
182 		hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
183 
184 		/* setup horizontal timing values.  */
185 		val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1);
186 		writel(val, ctx->regs + VIDTCON2);
187 
188 		val = VIDTCON3_HSPW(hsync_len - 1);
189 		writel(val, ctx->regs + VIDTCON3);
190 	}
191 
192 	/* setup horizontal and vertical display size. */
193 	val = VIDTCON4_LINEVAL(mode->vdisplay - 1) |
194 	       VIDTCON4_HOZVAL(mode->hdisplay - 1);
195 	writel(val, ctx->regs + VIDTCON4);
196 
197 	writel(mode->vdisplay - 1, ctx->regs + LINECNT_OP_THRESHOLD);
198 
199 	/*
200 	 * fields of register with prefix '_F' would be updated
201 	 * at vsync(same as dma start)
202 	 */
203 	val = VIDCON0_ENVID | VIDCON0_ENVID_F;
204 	writel(val, ctx->regs + VIDCON0);
205 
206 	clkdiv = decon_calc_clkdiv(ctx, mode);
207 	if (clkdiv > 1) {
208 		val = VCLKCON1_CLKVAL_NUM_VCLK(clkdiv - 1);
209 		writel(val, ctx->regs + VCLKCON1);
210 		writel(val, ctx->regs + VCLKCON2);
211 	}
212 
213 	val = readl(ctx->regs + DECON_UPDATE);
214 	val |= DECON_UPDATE_STANDALONE_F;
215 	writel(val, ctx->regs + DECON_UPDATE);
216 }
217 
218 static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
219 {
220 	struct decon_context *ctx = crtc->ctx;
221 	u32 val;
222 
223 	if (ctx->suspended)
224 		return -EPERM;
225 
226 	if (!test_and_set_bit(0, &ctx->irq_flags)) {
227 		val = readl(ctx->regs + VIDINTCON0);
228 
229 		val |= VIDINTCON0_INT_ENABLE;
230 
231 		if (!ctx->i80_if) {
232 			val |= VIDINTCON0_INT_FRAME;
233 			val &= ~VIDINTCON0_FRAMESEL0_MASK;
234 			val |= VIDINTCON0_FRAMESEL0_VSYNC;
235 		}
236 
237 		writel(val, ctx->regs + VIDINTCON0);
238 	}
239 
240 	return 0;
241 }
242 
243 static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
244 {
245 	struct decon_context *ctx = crtc->ctx;
246 	u32 val;
247 
248 	if (ctx->suspended)
249 		return;
250 
251 	if (test_and_clear_bit(0, &ctx->irq_flags)) {
252 		val = readl(ctx->regs + VIDINTCON0);
253 
254 		val &= ~VIDINTCON0_INT_ENABLE;
255 		if (!ctx->i80_if)
256 			val &= ~VIDINTCON0_INT_FRAME;
257 
258 		writel(val, ctx->regs + VIDINTCON0);
259 	}
260 }
261 
262 static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win,
263 				 struct drm_framebuffer *fb)
264 {
265 	unsigned long val;
266 	int padding;
267 
268 	val = readl(ctx->regs + WINCON(win));
269 	val &= ~WINCONx_BPPMODE_MASK;
270 
271 	switch (fb->format->format) {
272 	case DRM_FORMAT_RGB565:
273 		val |= WINCONx_BPPMODE_16BPP_565;
274 		val |= WINCONx_BURSTLEN_16WORD;
275 		break;
276 	case DRM_FORMAT_XRGB8888:
277 		val |= WINCONx_BPPMODE_24BPP_xRGB;
278 		val |= WINCONx_BURSTLEN_16WORD;
279 		break;
280 	case DRM_FORMAT_XBGR8888:
281 		val |= WINCONx_BPPMODE_24BPP_xBGR;
282 		val |= WINCONx_BURSTLEN_16WORD;
283 		break;
284 	case DRM_FORMAT_RGBX8888:
285 		val |= WINCONx_BPPMODE_24BPP_RGBx;
286 		val |= WINCONx_BURSTLEN_16WORD;
287 		break;
288 	case DRM_FORMAT_BGRX8888:
289 		val |= WINCONx_BPPMODE_24BPP_BGRx;
290 		val |= WINCONx_BURSTLEN_16WORD;
291 		break;
292 	case DRM_FORMAT_ARGB8888:
293 		val |= WINCONx_BPPMODE_32BPP_ARGB | WINCONx_BLD_PIX |
294 			WINCONx_ALPHA_SEL;
295 		val |= WINCONx_BURSTLEN_16WORD;
296 		break;
297 	case DRM_FORMAT_ABGR8888:
298 		val |= WINCONx_BPPMODE_32BPP_ABGR | WINCONx_BLD_PIX |
299 			WINCONx_ALPHA_SEL;
300 		val |= WINCONx_BURSTLEN_16WORD;
301 		break;
302 	case DRM_FORMAT_RGBA8888:
303 		val |= WINCONx_BPPMODE_32BPP_RGBA | WINCONx_BLD_PIX |
304 			WINCONx_ALPHA_SEL;
305 		val |= WINCONx_BURSTLEN_16WORD;
306 		break;
307 	case DRM_FORMAT_BGRA8888:
308 	default:
309 		val |= WINCONx_BPPMODE_32BPP_BGRA | WINCONx_BLD_PIX |
310 			WINCONx_ALPHA_SEL;
311 		val |= WINCONx_BURSTLEN_16WORD;
312 		break;
313 	}
314 
315 	DRM_DEV_DEBUG_KMS(ctx->dev, "cpp = %d\n", fb->format->cpp[0]);
316 
317 	/*
318 	 * In case of exynos, setting dma-burst to 16Word causes permanent
319 	 * tearing for very small buffers, e.g. cursor buffer. Burst Mode
320 	 * switching which is based on plane size is not recommended as
321 	 * plane size varies a lot towards the end of the screen and rapid
322 	 * movement causes unstable DMA which results into iommu crash/tear.
323 	 */
324 
325 	padding = (fb->pitches[0] / fb->format->cpp[0]) - fb->width;
326 	if (fb->width + padding < MIN_FB_WIDTH_FOR_16WORD_BURST) {
327 		val &= ~WINCONx_BURSTLEN_MASK;
328 		val |= WINCONx_BURSTLEN_8WORD;
329 	}
330 
331 	writel(val, ctx->regs + WINCON(win));
332 }
333 
334 static void decon_win_set_colkey(struct decon_context *ctx, unsigned int win)
335 {
336 	unsigned int keycon0 = 0, keycon1 = 0;
337 
338 	keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
339 			WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
340 
341 	keycon1 = WxKEYCON1_COLVAL(0xffffffff);
342 
343 	writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
344 	writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
345 }
346 
347 /**
348  * decon_shadow_protect_win() - disable updating values from shadow registers at vsync
349  *
350  * @ctx: display and enhancement controller context
351  * @win: window to protect registers for
352  * @protect: 1 to protect (disable updates)
353  */
354 static void decon_shadow_protect_win(struct decon_context *ctx,
355 				     unsigned int win, bool protect)
356 {
357 	u32 bits, val;
358 
359 	bits = SHADOWCON_WINx_PROTECT(win);
360 
361 	val = readl(ctx->regs + SHADOWCON);
362 	if (protect)
363 		val |= bits;
364 	else
365 		val &= ~bits;
366 	writel(val, ctx->regs + SHADOWCON);
367 }
368 
369 static void decon_atomic_begin(struct exynos_drm_crtc *crtc)
370 {
371 	struct decon_context *ctx = crtc->ctx;
372 	int i;
373 
374 	if (ctx->suspended)
375 		return;
376 
377 	for (i = 0; i < WINDOWS_NR; i++)
378 		decon_shadow_protect_win(ctx, i, true);
379 }
380 
381 static void decon_update_plane(struct exynos_drm_crtc *crtc,
382 			       struct exynos_drm_plane *plane)
383 {
384 	struct exynos_drm_plane_state *state =
385 				to_exynos_plane_state(plane->base.state);
386 	struct decon_context *ctx = crtc->ctx;
387 	struct drm_framebuffer *fb = state->base.fb;
388 	int padding;
389 	unsigned long val, alpha;
390 	unsigned int last_x;
391 	unsigned int last_y;
392 	unsigned int win = plane->index;
393 	unsigned int cpp = fb->format->cpp[0];
394 	unsigned int pitch = fb->pitches[0];
395 
396 	if (ctx->suspended)
397 		return;
398 
399 	/*
400 	 * SHADOWCON/PRTCON register is used for enabling timing.
401 	 *
402 	 * for example, once only width value of a register is set,
403 	 * if the dma is started then decon hardware could malfunction so
404 	 * with protect window setting, the register fields with prefix '_F'
405 	 * wouldn't be updated at vsync also but updated once unprotect window
406 	 * is set.
407 	 */
408 
409 	/* buffer start address */
410 	val = (unsigned long)exynos_drm_fb_dma_addr(fb, 0);
411 	writel(val, ctx->regs + VIDW_BUF_START(win));
412 
413 	padding = (pitch / cpp) - fb->width;
414 
415 	/* buffer size */
416 	writel(fb->width + padding, ctx->regs + VIDW_WHOLE_X(win));
417 	writel(fb->height, ctx->regs + VIDW_WHOLE_Y(win));
418 
419 	/* offset from the start of the buffer to read */
420 	writel(state->src.x, ctx->regs + VIDW_OFFSET_X(win));
421 	writel(state->src.y, ctx->regs + VIDW_OFFSET_Y(win));
422 
423 	DRM_DEV_DEBUG_KMS(ctx->dev, "start addr = 0x%lx\n",
424 			(unsigned long)val);
425 	DRM_DEV_DEBUG_KMS(ctx->dev, "ovl_width = %d, ovl_height = %d\n",
426 			state->crtc.w, state->crtc.h);
427 
428 	val = VIDOSDxA_TOPLEFT_X(state->crtc.x) |
429 		VIDOSDxA_TOPLEFT_Y(state->crtc.y);
430 	writel(val, ctx->regs + VIDOSD_A(win));
431 
432 	last_x = state->crtc.x + state->crtc.w;
433 	if (last_x)
434 		last_x--;
435 	last_y = state->crtc.y + state->crtc.h;
436 	if (last_y)
437 		last_y--;
438 
439 	val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y);
440 
441 	writel(val, ctx->regs + VIDOSD_B(win));
442 
443 	DRM_DEV_DEBUG_KMS(ctx->dev, "osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
444 			state->crtc.x, state->crtc.y, last_x, last_y);
445 
446 	/* OSD alpha */
447 	alpha = VIDOSDxC_ALPHA0_R_F(0x0) |
448 			VIDOSDxC_ALPHA0_G_F(0x0) |
449 			VIDOSDxC_ALPHA0_B_F(0x0);
450 
451 	writel(alpha, ctx->regs + VIDOSD_C(win));
452 
453 	alpha = VIDOSDxD_ALPHA1_R_F(0xff) |
454 			VIDOSDxD_ALPHA1_G_F(0xff) |
455 			VIDOSDxD_ALPHA1_B_F(0xff);
456 
457 	writel(alpha, ctx->regs + VIDOSD_D(win));
458 
459 	decon_win_set_pixfmt(ctx, win, fb);
460 
461 	/* hardware window 0 doesn't support color key. */
462 	if (win != 0)
463 		decon_win_set_colkey(ctx, win);
464 
465 	/* wincon */
466 	val = readl(ctx->regs + WINCON(win));
467 	val |= WINCONx_TRIPLE_BUF_MODE;
468 	val |= WINCONx_ENWIN;
469 	writel(val, ctx->regs + WINCON(win));
470 
471 	/* Enable DMA channel and unprotect windows */
472 	decon_shadow_protect_win(ctx, win, false);
473 
474 	val = readl(ctx->regs + DECON_UPDATE);
475 	val |= DECON_UPDATE_STANDALONE_F;
476 	writel(val, ctx->regs + DECON_UPDATE);
477 }
478 
479 static void decon_disable_plane(struct exynos_drm_crtc *crtc,
480 				struct exynos_drm_plane *plane)
481 {
482 	struct decon_context *ctx = crtc->ctx;
483 	unsigned int win = plane->index;
484 	u32 val;
485 
486 	if (ctx->suspended)
487 		return;
488 
489 	/* protect windows */
490 	decon_shadow_protect_win(ctx, win, true);
491 
492 	/* wincon */
493 	val = readl(ctx->regs + WINCON(win));
494 	val &= ~WINCONx_ENWIN;
495 	writel(val, ctx->regs + WINCON(win));
496 
497 	val = readl(ctx->regs + DECON_UPDATE);
498 	val |= DECON_UPDATE_STANDALONE_F;
499 	writel(val, ctx->regs + DECON_UPDATE);
500 }
501 
502 static void decon_atomic_flush(struct exynos_drm_crtc *crtc)
503 {
504 	struct decon_context *ctx = crtc->ctx;
505 	int i;
506 
507 	if (ctx->suspended)
508 		return;
509 
510 	for (i = 0; i < WINDOWS_NR; i++)
511 		decon_shadow_protect_win(ctx, i, false);
512 	exynos_crtc_handle_event(crtc);
513 }
514 
515 static void decon_init(struct decon_context *ctx)
516 {
517 	u32 val;
518 
519 	writel(VIDCON0_SWRESET, ctx->regs + VIDCON0);
520 
521 	val = VIDOUTCON0_DISP_IF_0_ON;
522 	if (!ctx->i80_if)
523 		val |= VIDOUTCON0_RGBIF;
524 	writel(val, ctx->regs + VIDOUTCON0);
525 
526 	writel(VCLKCON0_CLKVALUP | VCLKCON0_VCLKFREE, ctx->regs + VCLKCON0);
527 
528 	if (!ctx->i80_if)
529 		writel(VIDCON1_VCLK_HOLD, ctx->regs + VIDCON1(0));
530 }
531 
532 static void decon_atomic_enable(struct exynos_drm_crtc *crtc)
533 {
534 	struct decon_context *ctx = crtc->ctx;
535 	int ret;
536 
537 	if (!ctx->suspended)
538 		return;
539 
540 	ret = pm_runtime_resume_and_get(ctx->dev);
541 	if (ret < 0) {
542 		DRM_DEV_ERROR(ctx->dev, "failed to enable DECON device.\n");
543 		return;
544 	}
545 
546 	decon_init(ctx);
547 
548 	/* if vblank was enabled status, enable it again. */
549 	if (test_and_clear_bit(0, &ctx->irq_flags))
550 		decon_enable_vblank(ctx->crtc);
551 
552 	decon_commit(ctx->crtc);
553 
554 	ctx->suspended = false;
555 }
556 
557 static void decon_atomic_disable(struct exynos_drm_crtc *crtc)
558 {
559 	struct decon_context *ctx = crtc->ctx;
560 	int i;
561 
562 	if (ctx->suspended)
563 		return;
564 
565 	/*
566 	 * We need to make sure that all windows are disabled before we
567 	 * suspend that connector. Otherwise we might try to scan from
568 	 * a destroyed buffer later.
569 	 */
570 	for (i = 0; i < WINDOWS_NR; i++)
571 		decon_disable_plane(crtc, &ctx->planes[i]);
572 
573 	pm_runtime_put_sync(ctx->dev);
574 
575 	ctx->suspended = true;
576 }
577 
578 static const struct exynos_drm_crtc_ops decon_crtc_ops = {
579 	.atomic_enable = decon_atomic_enable,
580 	.atomic_disable = decon_atomic_disable,
581 	.enable_vblank = decon_enable_vblank,
582 	.disable_vblank = decon_disable_vblank,
583 	.atomic_begin = decon_atomic_begin,
584 	.update_plane = decon_update_plane,
585 	.disable_plane = decon_disable_plane,
586 	.atomic_flush = decon_atomic_flush,
587 };
588 
589 
590 static irqreturn_t decon_irq_handler(int irq, void *dev_id)
591 {
592 	struct decon_context *ctx = (struct decon_context *)dev_id;
593 	u32 val, clear_bit;
594 
595 	val = readl(ctx->regs + VIDINTCON1);
596 
597 	clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
598 	if (val & clear_bit)
599 		writel(clear_bit, ctx->regs + VIDINTCON1);
600 
601 	/* check the crtc is detached already from encoder */
602 	if (!ctx->drm_dev)
603 		goto out;
604 
605 	if (!ctx->i80_if) {
606 		drm_crtc_handle_vblank(&ctx->crtc->base);
607 
608 		/* set wait vsync event to zero and wake up queue. */
609 		if (atomic_read(&ctx->wait_vsync_event)) {
610 			atomic_set(&ctx->wait_vsync_event, 0);
611 			wake_up(&ctx->wait_vsync_queue);
612 		}
613 	}
614 out:
615 	return IRQ_HANDLED;
616 }
617 
618 static int decon_bind(struct device *dev, struct device *master, void *data)
619 {
620 	struct decon_context *ctx = dev_get_drvdata(dev);
621 	struct drm_device *drm_dev = data;
622 	struct exynos_drm_plane *exynos_plane;
623 	unsigned int i;
624 	int ret;
625 
626 	ret = decon_ctx_initialize(ctx, drm_dev);
627 	if (ret) {
628 		DRM_DEV_ERROR(dev, "decon_ctx_initialize failed.\n");
629 		return ret;
630 	}
631 
632 	for (i = 0; i < WINDOWS_NR; i++) {
633 		ctx->configs[i].pixel_formats = decon_formats;
634 		ctx->configs[i].num_pixel_formats = ARRAY_SIZE(decon_formats);
635 		ctx->configs[i].zpos = i;
636 		ctx->configs[i].type = decon_win_types[i];
637 
638 		ret = exynos_plane_init(drm_dev, &ctx->planes[i], i,
639 					&ctx->configs[i]);
640 		if (ret)
641 			return ret;
642 	}
643 
644 	exynos_plane = &ctx->planes[DEFAULT_WIN];
645 	ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
646 			EXYNOS_DISPLAY_TYPE_LCD, &decon_crtc_ops, ctx);
647 	if (IS_ERR(ctx->crtc)) {
648 		decon_ctx_remove(ctx);
649 		return PTR_ERR(ctx->crtc);
650 	}
651 
652 	if (ctx->encoder)
653 		exynos_dpi_bind(drm_dev, ctx->encoder);
654 
655 	return 0;
656 
657 }
658 
659 static void decon_unbind(struct device *dev, struct device *master,
660 			void *data)
661 {
662 	struct decon_context *ctx = dev_get_drvdata(dev);
663 
664 	decon_atomic_disable(ctx->crtc);
665 
666 	if (ctx->encoder)
667 		exynos_dpi_remove(ctx->encoder);
668 
669 	decon_ctx_remove(ctx);
670 }
671 
672 static const struct component_ops decon_component_ops = {
673 	.bind	= decon_bind,
674 	.unbind = decon_unbind,
675 };
676 
677 static int decon_probe(struct platform_device *pdev)
678 {
679 	struct device *dev = &pdev->dev;
680 	struct decon_context *ctx;
681 	struct device_node *i80_if_timings;
682 	int ret;
683 
684 	if (!dev->of_node)
685 		return -ENODEV;
686 
687 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
688 	if (!ctx)
689 		return -ENOMEM;
690 
691 	ctx->dev = dev;
692 	ctx->suspended = true;
693 
694 	i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
695 	if (i80_if_timings)
696 		ctx->i80_if = true;
697 	of_node_put(i80_if_timings);
698 
699 	ctx->regs = of_iomap(dev->of_node, 0);
700 	if (!ctx->regs)
701 		return -ENOMEM;
702 
703 	ctx->pclk = devm_clk_get(dev, "pclk_decon0");
704 	if (IS_ERR(ctx->pclk)) {
705 		dev_err(dev, "failed to get bus clock pclk\n");
706 		ret = PTR_ERR(ctx->pclk);
707 		goto err_iounmap;
708 	}
709 
710 	ctx->aclk = devm_clk_get(dev, "aclk_decon0");
711 	if (IS_ERR(ctx->aclk)) {
712 		dev_err(dev, "failed to get bus clock aclk\n");
713 		ret = PTR_ERR(ctx->aclk);
714 		goto err_iounmap;
715 	}
716 
717 	ctx->eclk = devm_clk_get(dev, "decon0_eclk");
718 	if (IS_ERR(ctx->eclk)) {
719 		dev_err(dev, "failed to get eclock\n");
720 		ret = PTR_ERR(ctx->eclk);
721 		goto err_iounmap;
722 	}
723 
724 	ctx->vclk = devm_clk_get(dev, "decon0_vclk");
725 	if (IS_ERR(ctx->vclk)) {
726 		dev_err(dev, "failed to get vclock\n");
727 		ret = PTR_ERR(ctx->vclk);
728 		goto err_iounmap;
729 	}
730 
731 	ret =  platform_get_irq_byname(pdev, ctx->i80_if ? "lcd_sys" : "vsync");
732 	if (ret < 0)
733 		goto err_iounmap;
734 
735 	ret = devm_request_irq(dev, ret, decon_irq_handler, 0, "drm_decon", ctx);
736 	if (ret) {
737 		dev_err(dev, "irq request failed.\n");
738 		goto err_iounmap;
739 	}
740 
741 	init_waitqueue_head(&ctx->wait_vsync_queue);
742 	atomic_set(&ctx->wait_vsync_event, 0);
743 
744 	platform_set_drvdata(pdev, ctx);
745 
746 	ctx->encoder = exynos_dpi_probe(dev);
747 	if (IS_ERR(ctx->encoder)) {
748 		ret = PTR_ERR(ctx->encoder);
749 		goto err_iounmap;
750 	}
751 
752 	pm_runtime_enable(dev);
753 
754 	ret = component_add(dev, &decon_component_ops);
755 	if (ret)
756 		goto err_disable_pm_runtime;
757 
758 	return ret;
759 
760 err_disable_pm_runtime:
761 	pm_runtime_disable(dev);
762 
763 err_iounmap:
764 	iounmap(ctx->regs);
765 
766 	return ret;
767 }
768 
769 static int decon_remove(struct platform_device *pdev)
770 {
771 	struct decon_context *ctx = dev_get_drvdata(&pdev->dev);
772 
773 	pm_runtime_disable(&pdev->dev);
774 
775 	iounmap(ctx->regs);
776 
777 	component_del(&pdev->dev, &decon_component_ops);
778 
779 	return 0;
780 }
781 
782 static int exynos7_decon_suspend(struct device *dev)
783 {
784 	struct decon_context *ctx = dev_get_drvdata(dev);
785 
786 	clk_disable_unprepare(ctx->vclk);
787 	clk_disable_unprepare(ctx->eclk);
788 	clk_disable_unprepare(ctx->aclk);
789 	clk_disable_unprepare(ctx->pclk);
790 
791 	return 0;
792 }
793 
794 static int exynos7_decon_resume(struct device *dev)
795 {
796 	struct decon_context *ctx = dev_get_drvdata(dev);
797 	int ret;
798 
799 	ret = clk_prepare_enable(ctx->pclk);
800 	if (ret < 0) {
801 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the pclk [%d]\n",
802 			      ret);
803 		goto err_pclk_enable;
804 	}
805 
806 	ret = clk_prepare_enable(ctx->aclk);
807 	if (ret < 0) {
808 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the aclk [%d]\n",
809 			      ret);
810 		goto err_aclk_enable;
811 	}
812 
813 	ret = clk_prepare_enable(ctx->eclk);
814 	if  (ret < 0) {
815 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the eclk [%d]\n",
816 			      ret);
817 		goto err_eclk_enable;
818 	}
819 
820 	ret = clk_prepare_enable(ctx->vclk);
821 	if  (ret < 0) {
822 		DRM_DEV_ERROR(dev, "Failed to prepare_enable the vclk [%d]\n",
823 			      ret);
824 		goto err_vclk_enable;
825 	}
826 
827 	return 0;
828 
829 err_vclk_enable:
830 	clk_disable_unprepare(ctx->eclk);
831 err_eclk_enable:
832 	clk_disable_unprepare(ctx->aclk);
833 err_aclk_enable:
834 	clk_disable_unprepare(ctx->pclk);
835 err_pclk_enable:
836 	return ret;
837 }
838 
839 static DEFINE_RUNTIME_DEV_PM_OPS(exynos7_decon_pm_ops, exynos7_decon_suspend,
840 				 exynos7_decon_resume, NULL);
841 
842 struct platform_driver decon_driver = {
843 	.probe		= decon_probe,
844 	.remove		= decon_remove,
845 	.driver		= {
846 		.name	= "exynos-decon",
847 		.pm	= pm_ptr(&exynos7_decon_pm_ops),
848 		.of_match_table = decon_driver_dt_match,
849 	},
850 };
851