1 /* 2 * Copyright (C) 2014 Intel Corporation 3 * 4 * DRM universal plane helper functions 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a 7 * copy of this software and associated documentation files (the "Software"), 8 * to deal in the Software without restriction, including without limitation 9 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 10 * and/or sell copies of the Software, and to permit persons to whom the 11 * Software is furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice (including the next 14 * paragraph) shall be included in all copies or substantial portions of the 15 * Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 23 * SOFTWARE. 24 */ 25 26 #include <linux/list.h> 27 #include <drm/drmP.h> 28 #include <drm/drm_plane_helper.h> 29 #include <drm/drm_rect.h> 30 #include <drm/drm_atomic.h> 31 #include <drm/drm_crtc_helper.h> 32 #include <drm/drm_atomic_helper.h> 33 34 #define SUBPIXEL_MASK 0xffff 35 36 /** 37 * DOC: overview 38 * 39 * This helper library has two parts. The first part has support to implement 40 * primary plane support on top of the normal CRTC configuration interface. 41 * Since the legacy ->set_config interface ties the primary plane together with 42 * the CRTC state this does not allow userspace to disable the primary plane 43 * itself. To avoid too much duplicated code use 44 * drm_plane_helper_check_update() which can be used to enforce the same 45 * restrictions as primary planes had thus. The default primary plane only 46 * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached 47 * framebuffer. 48 * 49 * Drivers are highly recommended to implement proper support for primary 50 * planes, and newly merged drivers must not rely upon these transitional 51 * helpers. 52 * 53 * The second part also implements transitional helpers which allow drivers to 54 * gradually switch to the atomic helper infrastructure for plane updates. Once 55 * that switch is complete drivers shouldn't use these any longer, instead using 56 * the proper legacy implementations for update and disable plane hooks provided 57 * by the atomic helpers. 58 * 59 * Again drivers are strongly urged to switch to the new interfaces. 60 */ 61 62 /* 63 * This is the minimal list of formats that seem to be safe for modeset use 64 * with all current DRM drivers. Most hardware can actually support more 65 * formats than this and drivers may specify a more accurate list when 66 * creating the primary plane. However drivers that still call 67 * drm_plane_init() will use this minimal format list as the default. 68 */ 69 static const uint32_t safe_modeset_formats[] = { 70 DRM_FORMAT_XRGB8888, 71 DRM_FORMAT_ARGB8888, 72 }; 73 74 /* 75 * Returns the connectors currently associated with a CRTC. This function 76 * should be called twice: once with a NULL connector list to retrieve 77 * the list size, and once with the properly allocated list to be filled in. 78 */ 79 static int get_connectors_for_crtc(struct drm_crtc *crtc, 80 struct drm_connector **connector_list, 81 int num_connectors) 82 { 83 struct drm_device *dev = crtc->dev; 84 struct drm_connector *connector; 85 int count = 0; 86 87 /* 88 * Note: Once we change the plane hooks to more fine-grained locking we 89 * need to grab the connection_mutex here to be able to make these 90 * checks. 91 */ 92 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); 93 94 drm_for_each_connector(connector, dev) { 95 if (connector->encoder && connector->encoder->crtc == crtc) { 96 if (connector_list != NULL && count < num_connectors) 97 *(connector_list++) = connector; 98 99 count++; 100 } 101 } 102 103 return count; 104 } 105 106 /** 107 * drm_plane_helper_check_update() - Check plane update for validity 108 * @plane: plane object to update 109 * @crtc: owning CRTC of owning plane 110 * @fb: framebuffer to flip onto plane 111 * @src: source coordinates in 16.16 fixed point 112 * @dest: integer destination coordinates 113 * @clip: integer clipping coordinates 114 * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point 115 * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point 116 * @can_position: is it legal to position the plane such that it 117 * doesn't cover the entire crtc? This will generally 118 * only be false for primary planes. 119 * @can_update_disabled: can the plane be updated while the crtc 120 * is disabled? 121 * @visible: output parameter indicating whether plane is still visible after 122 * clipping 123 * 124 * Checks that a desired plane update is valid. Drivers that provide 125 * their own plane handling rather than helper-provided implementations may 126 * still wish to call this function to avoid duplication of error checking 127 * code. 128 * 129 * RETURNS: 130 * Zero if update appears valid, error code on failure 131 */ 132 int drm_plane_helper_check_update(struct drm_plane *plane, 133 struct drm_crtc *crtc, 134 struct drm_framebuffer *fb, 135 struct drm_rect *src, 136 struct drm_rect *dest, 137 const struct drm_rect *clip, 138 int min_scale, 139 int max_scale, 140 bool can_position, 141 bool can_update_disabled, 142 bool *visible) 143 { 144 int hscale, vscale; 145 146 if (!fb) { 147 *visible = false; 148 return 0; 149 } 150 151 /* crtc should only be NULL when disabling (i.e., !fb) */ 152 if (WARN_ON(!crtc)) { 153 *visible = false; 154 return 0; 155 } 156 157 if (!crtc->enabled && !can_update_disabled) { 158 DRM_DEBUG_KMS("Cannot update plane of a disabled CRTC.\n"); 159 return -EINVAL; 160 } 161 162 /* Check scaling */ 163 hscale = drm_rect_calc_hscale(src, dest, min_scale, max_scale); 164 vscale = drm_rect_calc_vscale(src, dest, min_scale, max_scale); 165 if (hscale < 0 || vscale < 0) { 166 DRM_DEBUG_KMS("Invalid scaling of plane\n"); 167 return -ERANGE; 168 } 169 170 *visible = drm_rect_clip_scaled(src, dest, clip, hscale, vscale); 171 if (!*visible) 172 /* 173 * Plane isn't visible; some drivers can handle this 174 * so we just return success here. Drivers that can't 175 * (including those that use the primary plane helper's 176 * update function) will return an error from their 177 * update_plane handler. 178 */ 179 return 0; 180 181 if (!can_position && !drm_rect_equals(dest, clip)) { 182 DRM_DEBUG_KMS("Plane must cover entire CRTC\n"); 183 return -EINVAL; 184 } 185 186 return 0; 187 } 188 EXPORT_SYMBOL(drm_plane_helper_check_update); 189 190 /** 191 * drm_primary_helper_update() - Helper for primary plane update 192 * @plane: plane object to update 193 * @crtc: owning CRTC of owning plane 194 * @fb: framebuffer to flip onto plane 195 * @crtc_x: x offset of primary plane on crtc 196 * @crtc_y: y offset of primary plane on crtc 197 * @crtc_w: width of primary plane rectangle on crtc 198 * @crtc_h: height of primary plane rectangle on crtc 199 * @src_x: x offset of @fb for panning 200 * @src_y: y offset of @fb for panning 201 * @src_w: width of source rectangle in @fb 202 * @src_h: height of source rectangle in @fb 203 * 204 * Provides a default plane update handler for primary planes. This is handler 205 * is called in response to a userspace SetPlane operation on the plane with a 206 * non-NULL framebuffer. We call the driver's modeset handler to update the 207 * framebuffer. 208 * 209 * SetPlane() on a primary plane of a disabled CRTC is not supported, and will 210 * return an error. 211 * 212 * Note that we make some assumptions about hardware limitations that may not be 213 * true for all hardware -- 214 * 1) Primary plane cannot be repositioned. 215 * 2) Primary plane cannot be scaled. 216 * 3) Primary plane must cover the entire CRTC. 217 * 4) Subpixel positioning is not supported. 218 * Drivers for hardware that don't have these restrictions can provide their 219 * own implementation rather than using this helper. 220 * 221 * RETURNS: 222 * Zero on success, error code on failure 223 */ 224 int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, 225 struct drm_framebuffer *fb, 226 int crtc_x, int crtc_y, 227 unsigned int crtc_w, unsigned int crtc_h, 228 uint32_t src_x, uint32_t src_y, 229 uint32_t src_w, uint32_t src_h) 230 { 231 struct drm_mode_set set = { 232 .crtc = crtc, 233 .fb = fb, 234 .mode = &crtc->mode, 235 .x = src_x >> 16, 236 .y = src_y >> 16, 237 }; 238 struct drm_rect src = { 239 .x1 = src_x, 240 .y1 = src_y, 241 .x2 = src_x + src_w, 242 .y2 = src_y + src_h, 243 }; 244 struct drm_rect dest = { 245 .x1 = crtc_x, 246 .y1 = crtc_y, 247 .x2 = crtc_x + crtc_w, 248 .y2 = crtc_y + crtc_h, 249 }; 250 const struct drm_rect clip = { 251 .x2 = crtc->mode.hdisplay, 252 .y2 = crtc->mode.vdisplay, 253 }; 254 struct drm_connector **connector_list; 255 int num_connectors, ret; 256 bool visible; 257 258 ret = drm_plane_helper_check_update(plane, crtc, fb, 259 &src, &dest, &clip, 260 DRM_PLANE_HELPER_NO_SCALING, 261 DRM_PLANE_HELPER_NO_SCALING, 262 false, false, &visible); 263 if (ret) 264 return ret; 265 266 if (!visible) 267 /* 268 * Primary plane isn't visible. Note that unless a driver 269 * provides their own disable function, this will just 270 * wind up returning -EINVAL to userspace. 271 */ 272 return plane->funcs->disable_plane(plane); 273 274 /* Find current connectors for CRTC */ 275 num_connectors = get_connectors_for_crtc(crtc, NULL, 0); 276 BUG_ON(num_connectors == 0); 277 connector_list = kzalloc(num_connectors * sizeof(*connector_list), 278 GFP_KERNEL); 279 if (!connector_list) 280 return -ENOMEM; 281 get_connectors_for_crtc(crtc, connector_list, num_connectors); 282 283 set.connectors = connector_list; 284 set.num_connectors = num_connectors; 285 286 /* 287 * We call set_config() directly here rather than using 288 * drm_mode_set_config_internal. We're reprogramming the same 289 * connectors that were already in use, so we shouldn't need the extra 290 * cross-CRTC fb refcounting to accomodate stealing connectors. 291 * drm_mode_setplane() already handles the basic refcounting for the 292 * framebuffers involved in this operation. 293 */ 294 ret = crtc->funcs->set_config(&set); 295 296 kfree(connector_list); 297 return ret; 298 } 299 EXPORT_SYMBOL(drm_primary_helper_update); 300 301 /** 302 * drm_primary_helper_disable() - Helper for primary plane disable 303 * @plane: plane to disable 304 * 305 * Provides a default plane disable handler for primary planes. This is handler 306 * is called in response to a userspace SetPlane operation on the plane with a 307 * NULL framebuffer parameter. It unconditionally fails the disable call with 308 * -EINVAL the only way to disable the primary plane without driver support is 309 * to disable the entier CRTC. Which does not match the plane ->disable hook. 310 * 311 * Note that some hardware may be able to disable the primary plane without 312 * disabling the whole CRTC. Drivers for such hardware should provide their 313 * own disable handler that disables just the primary plane (and they'll likely 314 * need to provide their own update handler as well to properly re-enable a 315 * disabled primary plane). 316 * 317 * RETURNS: 318 * Unconditionally returns -EINVAL. 319 */ 320 int drm_primary_helper_disable(struct drm_plane *plane) 321 { 322 return -EINVAL; 323 } 324 EXPORT_SYMBOL(drm_primary_helper_disable); 325 326 /** 327 * drm_primary_helper_destroy() - Helper for primary plane destruction 328 * @plane: plane to destroy 329 * 330 * Provides a default plane destroy handler for primary planes. This handler 331 * is called during CRTC destruction. We disable the primary plane, remove 332 * it from the DRM plane list, and deallocate the plane structure. 333 */ 334 void drm_primary_helper_destroy(struct drm_plane *plane) 335 { 336 drm_plane_cleanup(plane); 337 kfree(plane); 338 } 339 EXPORT_SYMBOL(drm_primary_helper_destroy); 340 341 const struct drm_plane_funcs drm_primary_helper_funcs = { 342 .update_plane = drm_primary_helper_update, 343 .disable_plane = drm_primary_helper_disable, 344 .destroy = drm_primary_helper_destroy, 345 }; 346 EXPORT_SYMBOL(drm_primary_helper_funcs); 347 348 static struct drm_plane *create_primary_plane(struct drm_device *dev) 349 { 350 struct drm_plane *primary; 351 int ret; 352 353 primary = kzalloc(sizeof(*primary), GFP_KERNEL); 354 if (primary == NULL) { 355 DRM_DEBUG_KMS("Failed to allocate primary plane\n"); 356 return NULL; 357 } 358 359 /* 360 * Remove the format_default field from drm_plane when dropping 361 * this helper. 362 */ 363 primary->format_default = true; 364 365 /* possible_crtc's will be filled in later by crtc_init */ 366 ret = drm_universal_plane_init(dev, primary, 0, 367 &drm_primary_helper_funcs, 368 safe_modeset_formats, 369 ARRAY_SIZE(safe_modeset_formats), 370 DRM_PLANE_TYPE_PRIMARY); 371 if (ret) { 372 kfree(primary); 373 primary = NULL; 374 } 375 376 return primary; 377 } 378 379 /** 380 * drm_crtc_init - Legacy CRTC initialization function 381 * @dev: DRM device 382 * @crtc: CRTC object to init 383 * @funcs: callbacks for the new CRTC 384 * 385 * Initialize a CRTC object with a default helper-provided primary plane and no 386 * cursor plane. 387 * 388 * Returns: 389 * Zero on success, error code on failure. 390 */ 391 int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc, 392 const struct drm_crtc_funcs *funcs) 393 { 394 struct drm_plane *primary; 395 396 primary = create_primary_plane(dev); 397 return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs); 398 } 399 EXPORT_SYMBOL(drm_crtc_init); 400 401 int drm_plane_helper_commit(struct drm_plane *plane, 402 struct drm_plane_state *plane_state, 403 struct drm_framebuffer *old_fb) 404 { 405 const struct drm_plane_helper_funcs *plane_funcs; 406 struct drm_crtc *crtc[2]; 407 const struct drm_crtc_helper_funcs *crtc_funcs[2]; 408 int i, ret = 0; 409 410 plane_funcs = plane->helper_private; 411 412 /* Since this is a transitional helper we can't assume that plane->state 413 * is always valid. Hence we need to use plane->crtc instead of 414 * plane->state->crtc as the old crtc. */ 415 crtc[0] = plane->crtc; 416 crtc[1] = crtc[0] != plane_state->crtc ? plane_state->crtc : NULL; 417 418 for (i = 0; i < 2; i++) 419 crtc_funcs[i] = crtc[i] ? crtc[i]->helper_private : NULL; 420 421 if (plane_funcs->atomic_check) { 422 ret = plane_funcs->atomic_check(plane, plane_state); 423 if (ret) 424 goto out; 425 } 426 427 if (plane_funcs->prepare_fb && plane_state->fb && 428 plane_state->fb != old_fb) { 429 ret = plane_funcs->prepare_fb(plane, 430 plane_state); 431 if (ret) 432 goto out; 433 } 434 435 /* Point of no return, commit sw state. */ 436 swap(plane->state, plane_state); 437 438 for (i = 0; i < 2; i++) { 439 if (crtc_funcs[i] && crtc_funcs[i]->atomic_begin) 440 crtc_funcs[i]->atomic_begin(crtc[i], crtc[i]->state); 441 } 442 443 /* 444 * Drivers may optionally implement the ->atomic_disable callback, so 445 * special-case that here. 446 */ 447 if (drm_atomic_plane_disabling(plane, plane_state) && 448 plane_funcs->atomic_disable) 449 plane_funcs->atomic_disable(plane, plane_state); 450 else 451 plane_funcs->atomic_update(plane, plane_state); 452 453 for (i = 0; i < 2; i++) { 454 if (crtc_funcs[i] && crtc_funcs[i]->atomic_flush) 455 crtc_funcs[i]->atomic_flush(crtc[i], crtc[i]->state); 456 } 457 458 /* 459 * If we only moved the plane and didn't change fb's, there's no need to 460 * wait for vblank. 461 */ 462 if (plane->state->fb == old_fb) 463 goto out; 464 465 for (i = 0; i < 2; i++) { 466 if (!crtc[i]) 467 continue; 468 469 if (crtc[i]->cursor == plane) 470 continue; 471 472 /* There's no other way to figure out whether the crtc is running. */ 473 ret = drm_crtc_vblank_get(crtc[i]); 474 if (ret == 0) { 475 drm_crtc_wait_one_vblank(crtc[i]); 476 drm_crtc_vblank_put(crtc[i]); 477 } 478 479 ret = 0; 480 } 481 482 if (plane_funcs->cleanup_fb) 483 plane_funcs->cleanup_fb(plane, plane_state); 484 out: 485 if (plane_state) { 486 if (plane->funcs->atomic_destroy_state) 487 plane->funcs->atomic_destroy_state(plane, plane_state); 488 else 489 drm_atomic_helper_plane_destroy_state(plane, plane_state); 490 } 491 492 return ret; 493 } 494 495 /** 496 * drm_plane_helper_update() - Transitional helper for plane update 497 * @plane: plane object to update 498 * @crtc: owning CRTC of owning plane 499 * @fb: framebuffer to flip onto plane 500 * @crtc_x: x offset of primary plane on crtc 501 * @crtc_y: y offset of primary plane on crtc 502 * @crtc_w: width of primary plane rectangle on crtc 503 * @crtc_h: height of primary plane rectangle on crtc 504 * @src_x: x offset of @fb for panning 505 * @src_y: y offset of @fb for panning 506 * @src_w: width of source rectangle in @fb 507 * @src_h: height of source rectangle in @fb 508 * 509 * Provides a default plane update handler using the atomic plane update 510 * functions. It is fully left to the driver to check plane constraints and 511 * handle corner-cases like a fully occluded or otherwise invisible plane. 512 * 513 * This is useful for piecewise transitioning of a driver to the atomic helpers. 514 * 515 * RETURNS: 516 * Zero on success, error code on failure 517 */ 518 int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, 519 struct drm_framebuffer *fb, 520 int crtc_x, int crtc_y, 521 unsigned int crtc_w, unsigned int crtc_h, 522 uint32_t src_x, uint32_t src_y, 523 uint32_t src_w, uint32_t src_h) 524 { 525 struct drm_plane_state *plane_state; 526 527 if (plane->funcs->atomic_duplicate_state) 528 plane_state = plane->funcs->atomic_duplicate_state(plane); 529 else { 530 if (!plane->state) 531 drm_atomic_helper_plane_reset(plane); 532 533 plane_state = drm_atomic_helper_plane_duplicate_state(plane); 534 } 535 if (!plane_state) 536 return -ENOMEM; 537 plane_state->plane = plane; 538 539 plane_state->crtc = crtc; 540 drm_atomic_set_fb_for_plane(plane_state, fb); 541 plane_state->crtc_x = crtc_x; 542 plane_state->crtc_y = crtc_y; 543 plane_state->crtc_h = crtc_h; 544 plane_state->crtc_w = crtc_w; 545 plane_state->src_x = src_x; 546 plane_state->src_y = src_y; 547 plane_state->src_h = src_h; 548 plane_state->src_w = src_w; 549 550 return drm_plane_helper_commit(plane, plane_state, plane->fb); 551 } 552 EXPORT_SYMBOL(drm_plane_helper_update); 553 554 /** 555 * drm_plane_helper_disable() - Transitional helper for plane disable 556 * @plane: plane to disable 557 * 558 * Provides a default plane disable handler using the atomic plane update 559 * functions. It is fully left to the driver to check plane constraints and 560 * handle corner-cases like a fully occluded or otherwise invisible plane. 561 * 562 * This is useful for piecewise transitioning of a driver to the atomic helpers. 563 * 564 * RETURNS: 565 * Zero on success, error code on failure 566 */ 567 int drm_plane_helper_disable(struct drm_plane *plane) 568 { 569 struct drm_plane_state *plane_state; 570 571 /* crtc helpers love to call disable functions for already disabled hw 572 * functions. So cope with that. */ 573 if (!plane->crtc) 574 return 0; 575 576 if (plane->funcs->atomic_duplicate_state) 577 plane_state = plane->funcs->atomic_duplicate_state(plane); 578 else { 579 if (!plane->state) 580 drm_atomic_helper_plane_reset(plane); 581 582 plane_state = drm_atomic_helper_plane_duplicate_state(plane); 583 } 584 if (!plane_state) 585 return -ENOMEM; 586 plane_state->plane = plane; 587 588 plane_state->crtc = NULL; 589 drm_atomic_set_fb_for_plane(plane_state, NULL); 590 591 return drm_plane_helper_commit(plane, plane_state, plane->fb); 592 } 593 EXPORT_SYMBOL(drm_plane_helper_disable); 594