1 /*
2  * Copyright (c) 2016 Intel Corporation
3  *
4  * Permission to use, copy, modify, distribute, and sell this software and its
5  * documentation for any purpose is hereby granted without fee, provided that
6  * the above copyright notice appear in all copies and that both that copyright
7  * notice and this permission notice appear in supporting documentation, and
8  * that the name of the copyright holders not be used in advertising or
9  * publicity pertaining to distribution of the software without specific,
10  * written prior permission.  The copyright holders make no representations
11  * about the suitability of this software for any purpose.  It is provided "as
12  * is" without express or implied warranty.
13  *
14  * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16  * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20  * OF THIS SOFTWARE.
21  */
22 
23 #include <drm/drm_atomic_helper.h>
24 #include <drm/drm_fb_helper.h>
25 #include <drm/drm_fourcc.h>
26 #include <drm/drm_framebuffer.h>
27 #include <drm/drm_modeset_helper.h>
28 #include <drm/drm_plane_helper.h>
29 #include <drm/drm_print.h>
30 #include <drm/drm_probe_helper.h>
31 
32 /**
33  * DOC: aux kms helpers
34  *
35  * This helper library contains various one-off functions which don't really fit
36  * anywhere else in the DRM modeset helper library.
37  */
38 
39 /**
40  * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
41  * 						connector list
42  * @dev: drm device to operate on
43  *
44  * Some userspace presumes that the first connected connector is the main
45  * display, where it's supposed to display e.g. the login screen. For
46  * laptops, this should be the main panel. Use this function to sort all
47  * (eDP/LVDS/DSI) panels to the front of the connector list, instead of
48  * painstakingly trying to initialize them in the right order.
49  */
50 void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
51 {
52 	struct drm_connector *connector, *tmp;
53 	struct list_head panel_list;
54 
55 	INIT_LIST_HEAD(&panel_list);
56 
57 	spin_lock_irq(&dev->mode_config.connector_list_lock);
58 	list_for_each_entry_safe(connector, tmp,
59 				 &dev->mode_config.connector_list, head) {
60 		if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
61 		    connector->connector_type == DRM_MODE_CONNECTOR_eDP ||
62 		    connector->connector_type == DRM_MODE_CONNECTOR_DSI)
63 			list_move_tail(&connector->head, &panel_list);
64 	}
65 
66 	list_splice(&panel_list, &dev->mode_config.connector_list);
67 	spin_unlock_irq(&dev->mode_config.connector_list_lock);
68 }
69 EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
70 
71 /**
72  * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata
73  * @dev: DRM device
74  * @fb: drm_framebuffer object to fill out
75  * @mode_cmd: metadata from the userspace fb creation request
76  *
77  * This helper can be used in a drivers fb_create callback to pre-fill the fb's
78  * metadata fields.
79  */
80 void drm_helper_mode_fill_fb_struct(struct drm_device *dev,
81 				    struct drm_framebuffer *fb,
82 				    const struct drm_mode_fb_cmd2 *mode_cmd)
83 {
84 	int i;
85 
86 	fb->dev = dev;
87 	fb->format = drm_get_format_info(dev, mode_cmd);
88 	fb->width = mode_cmd->width;
89 	fb->height = mode_cmd->height;
90 	for (i = 0; i < 4; i++) {
91 		fb->pitches[i] = mode_cmd->pitches[i];
92 		fb->offsets[i] = mode_cmd->offsets[i];
93 	}
94 	fb->modifier = mode_cmd->modifier[0];
95 	fb->flags = mode_cmd->flags;
96 }
97 EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
98 
99 /*
100  * This is the minimal list of formats that seem to be safe for modeset use
101  * with all current DRM drivers.  Most hardware can actually support more
102  * formats than this and drivers may specify a more accurate list when
103  * creating the primary plane.
104  */
105 static const uint32_t safe_modeset_formats[] = {
106 	DRM_FORMAT_XRGB8888,
107 	DRM_FORMAT_ARGB8888,
108 };
109 
110 static const struct drm_plane_funcs primary_plane_funcs = {
111 	DRM_PLANE_NON_ATOMIC_FUNCS,
112 };
113 
114 /**
115  * drm_crtc_init - Legacy CRTC initialization function
116  * @dev: DRM device
117  * @crtc: CRTC object to init
118  * @funcs: callbacks for the new CRTC
119  *
120  * Initialize a CRTC object with a default helper-provided primary plane and no
121  * cursor plane.
122  *
123  * Note that we make some assumptions about hardware limitations that may not be
124  * true for all hardware:
125  *
126  * 1. Primary plane cannot be repositioned.
127  * 2. Primary plane cannot be scaled.
128  * 3. Primary plane must cover the entire CRTC.
129  * 4. Subpixel positioning is not supported.
130  * 5. The primary plane must always be on if the CRTC is enabled.
131  *
132  * This is purely a backwards compatibility helper for old drivers. Drivers
133  * should instead implement their own primary plane. Atomic drivers must do so.
134  * Drivers with the above hardware restriction can look into using &struct
135  * drm_simple_display_pipe, which encapsulates the above limitations into a nice
136  * interface.
137  *
138  * Returns:
139  * Zero on success, error code on failure.
140  */
141 int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
142 		  const struct drm_crtc_funcs *funcs)
143 {
144 	struct drm_plane *primary;
145 	int ret;
146 
147 	/* possible_crtc's will be filled in later by crtc_init */
148 	primary = __drm_universal_plane_alloc(dev, sizeof(*primary), 0, 0,
149 					      &primary_plane_funcs,
150 					      safe_modeset_formats,
151 					      ARRAY_SIZE(safe_modeset_formats),
152 					      NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
153 	if (IS_ERR(primary))
154 		return PTR_ERR(primary);
155 
156 	/*
157 	 * Remove the format_default field from drm_plane when dropping
158 	 * this helper.
159 	 */
160 	primary->format_default = true;
161 
162 	ret = drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs, NULL);
163 	if (ret)
164 		goto err_drm_plane_cleanup;
165 
166 	return 0;
167 
168 err_drm_plane_cleanup:
169 	drm_plane_cleanup(primary);
170 	kfree(primary);
171 	return ret;
172 }
173 EXPORT_SYMBOL(drm_crtc_init);
174 
175 /**
176  * drm_mode_config_helper_suspend - Modeset suspend helper
177  * @dev: DRM device
178  *
179  * This helper function takes care of suspending the modeset side. It disables
180  * output polling if initialized, suspends fbdev if used and finally calls
181  * drm_atomic_helper_suspend().
182  * If suspending fails, fbdev and polling is re-enabled.
183  *
184  * Returns:
185  * Zero on success, negative error code on error.
186  *
187  * See also:
188  * drm_kms_helper_poll_disable() and drm_fb_helper_set_suspend_unlocked().
189  */
190 int drm_mode_config_helper_suspend(struct drm_device *dev)
191 {
192 	struct drm_atomic_state *state;
193 
194 	if (!dev)
195 		return 0;
196 
197 	drm_kms_helper_poll_disable(dev);
198 	drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 1);
199 	state = drm_atomic_helper_suspend(dev);
200 	if (IS_ERR(state)) {
201 		drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0);
202 		drm_kms_helper_poll_enable(dev);
203 		return PTR_ERR(state);
204 	}
205 
206 	dev->mode_config.suspend_state = state;
207 
208 	return 0;
209 }
210 EXPORT_SYMBOL(drm_mode_config_helper_suspend);
211 
212 /**
213  * drm_mode_config_helper_resume - Modeset resume helper
214  * @dev: DRM device
215  *
216  * This helper function takes care of resuming the modeset side. It calls
217  * drm_atomic_helper_resume(), resumes fbdev if used and enables output polling
218  * if initiaized.
219  *
220  * Returns:
221  * Zero on success, negative error code on error.
222  *
223  * See also:
224  * drm_fb_helper_set_suspend_unlocked() and drm_kms_helper_poll_enable().
225  */
226 int drm_mode_config_helper_resume(struct drm_device *dev)
227 {
228 	int ret;
229 
230 	if (!dev)
231 		return 0;
232 
233 	if (WARN_ON(!dev->mode_config.suspend_state))
234 		return -EINVAL;
235 
236 	ret = drm_atomic_helper_resume(dev, dev->mode_config.suspend_state);
237 	if (ret)
238 		DRM_ERROR("Failed to resume (%d)\n", ret);
239 	dev->mode_config.suspend_state = NULL;
240 
241 	drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0);
242 	drm_kms_helper_poll_enable(dev);
243 
244 	return ret;
245 }
246 EXPORT_SYMBOL(drm_mode_config_helper_resume);
247