1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #include <drm/drm_encoder.h> 24 #include <drm/drm_mode_config.h> 25 #include <drm/drmP.h> 26 27 #include "drm_crtc_internal.h" 28 #include "drm_internal.h" 29 30 int drm_modeset_register_all(struct drm_device *dev) 31 { 32 int ret; 33 34 ret = drm_plane_register_all(dev); 35 if (ret) 36 goto err_plane; 37 38 ret = drm_crtc_register_all(dev); 39 if (ret) 40 goto err_crtc; 41 42 ret = drm_encoder_register_all(dev); 43 if (ret) 44 goto err_encoder; 45 46 ret = drm_connector_register_all(dev); 47 if (ret) 48 goto err_connector; 49 50 return 0; 51 52 err_connector: 53 drm_encoder_unregister_all(dev); 54 err_encoder: 55 drm_crtc_unregister_all(dev); 56 err_crtc: 57 drm_plane_unregister_all(dev); 58 err_plane: 59 return ret; 60 } 61 62 void drm_modeset_unregister_all(struct drm_device *dev) 63 { 64 drm_connector_unregister_all(dev); 65 drm_encoder_unregister_all(dev); 66 drm_crtc_unregister_all(dev); 67 drm_plane_unregister_all(dev); 68 } 69 70 /** 71 * drm_mode_getresources - get graphics configuration 72 * @dev: drm device for the ioctl 73 * @data: data pointer for the ioctl 74 * @file_priv: drm file for the ioctl call 75 * 76 * Construct a set of configuration description structures and return 77 * them to the user, including CRTC, connector and framebuffer configuration. 78 * 79 * Called by the user via ioctl. 80 * 81 * Returns: 82 * Zero on success, negative errno on failure. 83 */ 84 int drm_mode_getresources(struct drm_device *dev, void *data, 85 struct drm_file *file_priv) 86 { 87 struct drm_mode_card_res *card_res = data; 88 struct drm_framebuffer *fb; 89 struct drm_connector *connector; 90 struct drm_crtc *crtc; 91 struct drm_encoder *encoder; 92 int count, ret = 0; 93 uint32_t __user *fb_id; 94 uint32_t __user *crtc_id; 95 uint32_t __user *connector_id; 96 uint32_t __user *encoder_id; 97 struct drm_connector_list_iter conn_iter; 98 99 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 100 return -EOPNOTSUPP; 101 102 mutex_lock(&file_priv->fbs_lock); 103 count = 0; 104 fb_id = u64_to_user_ptr(card_res->fb_id_ptr); 105 list_for_each_entry(fb, &file_priv->fbs, filp_head) { 106 if (count < card_res->count_fbs && 107 put_user(fb->base.id, fb_id + count)) { 108 mutex_unlock(&file_priv->fbs_lock); 109 return -EFAULT; 110 } 111 count++; 112 } 113 card_res->count_fbs = count; 114 mutex_unlock(&file_priv->fbs_lock); 115 116 card_res->max_height = dev->mode_config.max_height; 117 card_res->min_height = dev->mode_config.min_height; 118 card_res->max_width = dev->mode_config.max_width; 119 card_res->min_width = dev->mode_config.min_width; 120 121 count = 0; 122 crtc_id = u64_to_user_ptr(card_res->crtc_id_ptr); 123 drm_for_each_crtc(crtc, dev) { 124 if (drm_lease_held(file_priv, crtc->base.id)) { 125 if (count < card_res->count_crtcs && 126 put_user(crtc->base.id, crtc_id + count)) 127 return -EFAULT; 128 count++; 129 } 130 } 131 card_res->count_crtcs = count; 132 133 count = 0; 134 encoder_id = u64_to_user_ptr(card_res->encoder_id_ptr); 135 drm_for_each_encoder(encoder, dev) { 136 if (count < card_res->count_encoders && 137 put_user(encoder->base.id, encoder_id + count)) 138 return -EFAULT; 139 count++; 140 } 141 card_res->count_encoders = count; 142 143 drm_connector_list_iter_begin(dev, &conn_iter); 144 count = 0; 145 connector_id = u64_to_user_ptr(card_res->connector_id_ptr); 146 drm_for_each_connector_iter(connector, &conn_iter) { 147 /* only expose writeback connectors if userspace understands them */ 148 if (!file_priv->writeback_connectors && 149 (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)) 150 continue; 151 152 if (drm_lease_held(file_priv, connector->base.id)) { 153 if (count < card_res->count_connectors && 154 put_user(connector->base.id, connector_id + count)) { 155 drm_connector_list_iter_end(&conn_iter); 156 return -EFAULT; 157 } 158 count++; 159 } 160 } 161 card_res->count_connectors = count; 162 drm_connector_list_iter_end(&conn_iter); 163 164 return ret; 165 } 166 167 /** 168 * drm_mode_config_reset - call ->reset callbacks 169 * @dev: drm device 170 * 171 * This functions calls all the crtc's, encoder's and connector's ->reset 172 * callback. Drivers can use this in e.g. their driver load or resume code to 173 * reset hardware and software state. 174 */ 175 void drm_mode_config_reset(struct drm_device *dev) 176 { 177 struct drm_crtc *crtc; 178 struct drm_plane *plane; 179 struct drm_encoder *encoder; 180 struct drm_connector *connector; 181 struct drm_connector_list_iter conn_iter; 182 183 drm_for_each_plane(plane, dev) 184 if (plane->funcs->reset) 185 plane->funcs->reset(plane); 186 187 drm_for_each_crtc(crtc, dev) 188 if (crtc->funcs->reset) 189 crtc->funcs->reset(crtc); 190 191 drm_for_each_encoder(encoder, dev) 192 if (encoder->funcs->reset) 193 encoder->funcs->reset(encoder); 194 195 drm_connector_list_iter_begin(dev, &conn_iter); 196 drm_for_each_connector_iter(connector, &conn_iter) 197 if (connector->funcs->reset) 198 connector->funcs->reset(connector); 199 drm_connector_list_iter_end(&conn_iter); 200 } 201 EXPORT_SYMBOL(drm_mode_config_reset); 202 203 /* 204 * Global properties 205 */ 206 static const struct drm_prop_enum_list drm_plane_type_enum_list[] = { 207 { DRM_PLANE_TYPE_OVERLAY, "Overlay" }, 208 { DRM_PLANE_TYPE_PRIMARY, "Primary" }, 209 { DRM_PLANE_TYPE_CURSOR, "Cursor" }, 210 }; 211 212 static int drm_mode_create_standard_properties(struct drm_device *dev) 213 { 214 struct drm_property *prop; 215 int ret; 216 217 ret = drm_connector_create_standard_properties(dev); 218 if (ret) 219 return ret; 220 221 prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, 222 "type", drm_plane_type_enum_list, 223 ARRAY_SIZE(drm_plane_type_enum_list)); 224 if (!prop) 225 return -ENOMEM; 226 dev->mode_config.plane_type_property = prop; 227 228 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, 229 "SRC_X", 0, UINT_MAX); 230 if (!prop) 231 return -ENOMEM; 232 dev->mode_config.prop_src_x = prop; 233 234 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, 235 "SRC_Y", 0, UINT_MAX); 236 if (!prop) 237 return -ENOMEM; 238 dev->mode_config.prop_src_y = prop; 239 240 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, 241 "SRC_W", 0, UINT_MAX); 242 if (!prop) 243 return -ENOMEM; 244 dev->mode_config.prop_src_w = prop; 245 246 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, 247 "SRC_H", 0, UINT_MAX); 248 if (!prop) 249 return -ENOMEM; 250 dev->mode_config.prop_src_h = prop; 251 252 prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, 253 "CRTC_X", INT_MIN, INT_MAX); 254 if (!prop) 255 return -ENOMEM; 256 dev->mode_config.prop_crtc_x = prop; 257 258 prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, 259 "CRTC_Y", INT_MIN, INT_MAX); 260 if (!prop) 261 return -ENOMEM; 262 dev->mode_config.prop_crtc_y = prop; 263 264 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, 265 "CRTC_W", 0, INT_MAX); 266 if (!prop) 267 return -ENOMEM; 268 dev->mode_config.prop_crtc_w = prop; 269 270 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, 271 "CRTC_H", 0, INT_MAX); 272 if (!prop) 273 return -ENOMEM; 274 dev->mode_config.prop_crtc_h = prop; 275 276 prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, 277 "FB_ID", DRM_MODE_OBJECT_FB); 278 if (!prop) 279 return -ENOMEM; 280 dev->mode_config.prop_fb_id = prop; 281 282 prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, 283 "IN_FENCE_FD", -1, INT_MAX); 284 if (!prop) 285 return -ENOMEM; 286 dev->mode_config.prop_in_fence_fd = prop; 287 288 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, 289 "OUT_FENCE_PTR", 0, U64_MAX); 290 if (!prop) 291 return -ENOMEM; 292 dev->mode_config.prop_out_fence_ptr = prop; 293 294 prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, 295 "CRTC_ID", DRM_MODE_OBJECT_CRTC); 296 if (!prop) 297 return -ENOMEM; 298 dev->mode_config.prop_crtc_id = prop; 299 300 prop = drm_property_create(dev, 301 DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB, 302 "FB_DAMAGE_CLIPS", 0); 303 if (!prop) 304 return -ENOMEM; 305 dev->mode_config.prop_fb_damage_clips = prop; 306 307 prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC, 308 "ACTIVE"); 309 if (!prop) 310 return -ENOMEM; 311 dev->mode_config.prop_active = prop; 312 313 prop = drm_property_create(dev, 314 DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB, 315 "MODE_ID", 0); 316 if (!prop) 317 return -ENOMEM; 318 dev->mode_config.prop_mode_id = prop; 319 320 prop = drm_property_create_bool(dev, 0, 321 "VRR_ENABLED"); 322 if (!prop) 323 return -ENOMEM; 324 dev->mode_config.prop_vrr_enabled = prop; 325 326 prop = drm_property_create(dev, 327 DRM_MODE_PROP_BLOB, 328 "DEGAMMA_LUT", 0); 329 if (!prop) 330 return -ENOMEM; 331 dev->mode_config.degamma_lut_property = prop; 332 333 prop = drm_property_create_range(dev, 334 DRM_MODE_PROP_IMMUTABLE, 335 "DEGAMMA_LUT_SIZE", 0, UINT_MAX); 336 if (!prop) 337 return -ENOMEM; 338 dev->mode_config.degamma_lut_size_property = prop; 339 340 prop = drm_property_create(dev, 341 DRM_MODE_PROP_BLOB, 342 "CTM", 0); 343 if (!prop) 344 return -ENOMEM; 345 dev->mode_config.ctm_property = prop; 346 347 prop = drm_property_create(dev, 348 DRM_MODE_PROP_BLOB, 349 "GAMMA_LUT", 0); 350 if (!prop) 351 return -ENOMEM; 352 dev->mode_config.gamma_lut_property = prop; 353 354 prop = drm_property_create_range(dev, 355 DRM_MODE_PROP_IMMUTABLE, 356 "GAMMA_LUT_SIZE", 0, UINT_MAX); 357 if (!prop) 358 return -ENOMEM; 359 dev->mode_config.gamma_lut_size_property = prop; 360 361 prop = drm_property_create(dev, 362 DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB, 363 "IN_FORMATS", 0); 364 if (!prop) 365 return -ENOMEM; 366 dev->mode_config.modifiers_property = prop; 367 368 return 0; 369 } 370 371 /** 372 * drm_mode_config_init - initialize DRM mode_configuration structure 373 * @dev: DRM device 374 * 375 * Initialize @dev's mode_config structure, used for tracking the graphics 376 * configuration of @dev. 377 * 378 * Since this initializes the modeset locks, no locking is possible. Which is no 379 * problem, since this should happen single threaded at init time. It is the 380 * driver's problem to ensure this guarantee. 381 * 382 */ 383 void drm_mode_config_init(struct drm_device *dev) 384 { 385 mutex_init(&dev->mode_config.mutex); 386 drm_modeset_lock_init(&dev->mode_config.connection_mutex); 387 mutex_init(&dev->mode_config.idr_mutex); 388 mutex_init(&dev->mode_config.fb_lock); 389 mutex_init(&dev->mode_config.blob_lock); 390 INIT_LIST_HEAD(&dev->mode_config.fb_list); 391 INIT_LIST_HEAD(&dev->mode_config.crtc_list); 392 INIT_LIST_HEAD(&dev->mode_config.connector_list); 393 INIT_LIST_HEAD(&dev->mode_config.encoder_list); 394 INIT_LIST_HEAD(&dev->mode_config.property_list); 395 INIT_LIST_HEAD(&dev->mode_config.property_blob_list); 396 INIT_LIST_HEAD(&dev->mode_config.plane_list); 397 INIT_LIST_HEAD(&dev->mode_config.privobj_list); 398 idr_init(&dev->mode_config.object_idr); 399 idr_init(&dev->mode_config.tile_idr); 400 ida_init(&dev->mode_config.connector_ida); 401 spin_lock_init(&dev->mode_config.connector_list_lock); 402 403 init_llist_head(&dev->mode_config.connector_free_list); 404 INIT_WORK(&dev->mode_config.connector_free_work, drm_connector_free_work_fn); 405 406 drm_mode_create_standard_properties(dev); 407 408 /* Just to be sure */ 409 dev->mode_config.num_fb = 0; 410 dev->mode_config.num_connector = 0; 411 dev->mode_config.num_crtc = 0; 412 dev->mode_config.num_encoder = 0; 413 dev->mode_config.num_total_plane = 0; 414 } 415 EXPORT_SYMBOL(drm_mode_config_init); 416 417 /** 418 * drm_mode_config_cleanup - free up DRM mode_config info 419 * @dev: DRM device 420 * 421 * Free up all the connectors and CRTCs associated with this DRM device, then 422 * free up the framebuffers and associated buffer objects. 423 * 424 * Note that since this /should/ happen single-threaded at driver/device 425 * teardown time, no locking is required. It's the driver's job to ensure that 426 * this guarantee actually holds true. 427 * 428 * FIXME: cleanup any dangling user buffer objects too 429 */ 430 void drm_mode_config_cleanup(struct drm_device *dev) 431 { 432 struct drm_connector *connector; 433 struct drm_connector_list_iter conn_iter; 434 struct drm_crtc *crtc, *ct; 435 struct drm_encoder *encoder, *enct; 436 struct drm_framebuffer *fb, *fbt; 437 struct drm_property *property, *pt; 438 struct drm_property_blob *blob, *bt; 439 struct drm_plane *plane, *plt; 440 441 list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list, 442 head) { 443 encoder->funcs->destroy(encoder); 444 } 445 446 drm_connector_list_iter_begin(dev, &conn_iter); 447 drm_for_each_connector_iter(connector, &conn_iter) { 448 /* drm_connector_list_iter holds an full reference to the 449 * current connector itself, which means it is inherently safe 450 * against unreferencing the current connector - but not against 451 * deleting it right away. */ 452 drm_connector_put(connector); 453 } 454 drm_connector_list_iter_end(&conn_iter); 455 /* connector_iter drops references in a work item. */ 456 flush_work(&dev->mode_config.connector_free_work); 457 if (WARN_ON(!list_empty(&dev->mode_config.connector_list))) { 458 drm_connector_list_iter_begin(dev, &conn_iter); 459 drm_for_each_connector_iter(connector, &conn_iter) 460 DRM_ERROR("connector %s leaked!\n", connector->name); 461 drm_connector_list_iter_end(&conn_iter); 462 } 463 464 list_for_each_entry_safe(property, pt, &dev->mode_config.property_list, 465 head) { 466 drm_property_destroy(dev, property); 467 } 468 469 list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list, 470 head) { 471 plane->funcs->destroy(plane); 472 } 473 474 list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) { 475 crtc->funcs->destroy(crtc); 476 } 477 478 list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list, 479 head_global) { 480 drm_property_blob_put(blob); 481 } 482 483 /* 484 * Single-threaded teardown context, so it's not required to grab the 485 * fb_lock to protect against concurrent fb_list access. Contrary, it 486 * would actually deadlock with the drm_framebuffer_cleanup function. 487 * 488 * Also, if there are any framebuffers left, that's a driver leak now, 489 * so politely WARN about this. 490 */ 491 WARN_ON(!list_empty(&dev->mode_config.fb_list)); 492 list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) { 493 struct drm_printer p = drm_debug_printer("[leaked fb]"); 494 drm_printf(&p, "framebuffer[%u]:\n", fb->base.id); 495 drm_framebuffer_print_info(&p, 1, fb); 496 drm_framebuffer_free(&fb->base.refcount); 497 } 498 499 ida_destroy(&dev->mode_config.connector_ida); 500 idr_destroy(&dev->mode_config.tile_idr); 501 idr_destroy(&dev->mode_config.object_idr); 502 drm_modeset_lock_fini(&dev->mode_config.connection_mutex); 503 } 504 EXPORT_SYMBOL(drm_mode_config_cleanup); 505