1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #include <drm/drmP.h> 24 #include <drm/drm_crtc.h> 25 #include <drm/drm_color_mgmt.h> 26 27 #include "drm_crtc_internal.h" 28 29 /** 30 * DOC: overview 31 * 32 * Color management or color space adjustments is supported through a set of 5 33 * properties on the &drm_crtc object. They are set up by calling 34 * drm_crtc_enable_color_mgmt(). 35 * 36 * "DEGAMMA_LUT”: 37 * Blob property to set the degamma lookup table (LUT) mapping pixel data 38 * from the framebuffer before it is given to the transformation matrix. 39 * The data is interpreted as an array of &struct drm_color_lut elements. 40 * Hardware might choose not to use the full precision of the LUT elements 41 * nor use all the elements of the LUT (for example the hardware might 42 * choose to interpolate between LUT[0] and LUT[4]). 43 * 44 * Setting this to NULL (blob property value set to 0) means a 45 * linear/pass-thru gamma table should be used. This is generally the 46 * driver boot-up state too. Drivers can access this blob through 47 * &drm_crtc_state.degamma_lut. 48 * 49 * “DEGAMMA_LUT_SIZE”: 50 * Unsinged range property to give the size of the lookup table to be set 51 * on the DEGAMMA_LUT property (the size depends on the underlying 52 * hardware). If drivers support multiple LUT sizes then they should 53 * publish the largest size, and sub-sample smaller sized LUTs (e.g. for 54 * split-gamma modes) appropriately. 55 * 56 * “CTM”: 57 * Blob property to set the current transformation matrix (CTM) apply to 58 * pixel data after the lookup through the degamma LUT and before the 59 * lookup through the gamma LUT. The data is interpreted as a struct 60 * &drm_color_ctm. 61 * 62 * Setting this to NULL (blob property value set to 0) means a 63 * unit/pass-thru matrix should be used. This is generally the driver 64 * boot-up state too. Drivers can access the blob for the color conversion 65 * matrix through &drm_crtc_state.ctm. 66 * 67 * “GAMMA_LUT”: 68 * Blob property to set the gamma lookup table (LUT) mapping pixel data 69 * after the transformation matrix to data sent to the connector. The 70 * data is interpreted as an array of &struct drm_color_lut elements. 71 * Hardware might choose not to use the full precision of the LUT elements 72 * nor use all the elements of the LUT (for example the hardware might 73 * choose to interpolate between LUT[0] and LUT[4]). 74 * 75 * Setting this to NULL (blob property value set to 0) means a 76 * linear/pass-thru gamma table should be used. This is generally the 77 * driver boot-up state too. Drivers can access this blob through 78 * &drm_crtc_state.gamma_lut. 79 * 80 * “GAMMA_LUT_SIZE”: 81 * Unsigned range property to give the size of the lookup table to be set 82 * on the GAMMA_LUT property (the size depends on the underlying hardware). 83 * If drivers support multiple LUT sizes then they should publish the 84 * largest size, and sub-sample smaller sized LUTs (e.g. for split-gamma 85 * modes) appropriately. 86 * 87 * There is also support for a legacy gamma table, which is set up by calling 88 * drm_mode_crtc_set_gamma_size(). Drivers which support both should use 89 * drm_atomic_helper_legacy_gamma_set() to alias the legacy gamma ramp with the 90 * "GAMMA_LUT" property above. 91 * 92 * Support for different non RGB color encodings is controlled through 93 * &drm_plane specific COLOR_ENCODING and COLOR_RANGE properties. They 94 * are set up by calling drm_plane_create_color_properties(). 95 * 96 * "COLOR_ENCODING" 97 * Optional plane enum property to support different non RGB 98 * color encodings. The driver can provide a subset of standard 99 * enum values supported by the DRM plane. 100 * 101 * "COLOR_RANGE" 102 * Optional plane enum property to support different non RGB 103 * color parameter ranges. The driver can provide a subset of 104 * standard enum values supported by the DRM plane. 105 */ 106 107 /** 108 * drm_color_lut_extract - clamp and round LUT entries 109 * @user_input: input value 110 * @bit_precision: number of bits the hw LUT supports 111 * 112 * Extract a degamma/gamma LUT value provided by user (in the form of 113 * &drm_color_lut entries) and round it to the precision supported by the 114 * hardware. 115 */ 116 uint32_t drm_color_lut_extract(uint32_t user_input, uint32_t bit_precision) 117 { 118 uint32_t val = user_input; 119 uint32_t max = 0xffff >> (16 - bit_precision); 120 121 /* Round only if we're not using full precision. */ 122 if (bit_precision < 16) { 123 val += 1UL << (16 - bit_precision - 1); 124 val >>= 16 - bit_precision; 125 } 126 127 return clamp_val(val, 0, max); 128 } 129 EXPORT_SYMBOL(drm_color_lut_extract); 130 131 /** 132 * drm_crtc_enable_color_mgmt - enable color management properties 133 * @crtc: DRM CRTC 134 * @degamma_lut_size: the size of the degamma lut (before CSC) 135 * @has_ctm: whether to attach ctm_property for CSC matrix 136 * @gamma_lut_size: the size of the gamma lut (after CSC) 137 * 138 * This function lets the driver enable the color correction 139 * properties on a CRTC. This includes 3 degamma, csc and gamma 140 * properties that userspace can set and 2 size properties to inform 141 * the userspace of the lut sizes. Each of the properties are 142 * optional. The gamma and degamma properties are only attached if 143 * their size is not 0 and ctm_property is only attached if has_ctm is 144 * true. 145 * 146 * Drivers should use drm_atomic_helper_legacy_gamma_set() to implement the 147 * legacy &drm_crtc_funcs.gamma_set callback. 148 */ 149 void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc, 150 uint degamma_lut_size, 151 bool has_ctm, 152 uint gamma_lut_size) 153 { 154 struct drm_device *dev = crtc->dev; 155 struct drm_mode_config *config = &dev->mode_config; 156 157 if (degamma_lut_size) { 158 drm_object_attach_property(&crtc->base, 159 config->degamma_lut_property, 0); 160 drm_object_attach_property(&crtc->base, 161 config->degamma_lut_size_property, 162 degamma_lut_size); 163 } 164 165 if (has_ctm) 166 drm_object_attach_property(&crtc->base, 167 config->ctm_property, 0); 168 169 if (gamma_lut_size) { 170 drm_object_attach_property(&crtc->base, 171 config->gamma_lut_property, 0); 172 drm_object_attach_property(&crtc->base, 173 config->gamma_lut_size_property, 174 gamma_lut_size); 175 } 176 } 177 EXPORT_SYMBOL(drm_crtc_enable_color_mgmt); 178 179 /** 180 * drm_mode_crtc_set_gamma_size - set the gamma table size 181 * @crtc: CRTC to set the gamma table size for 182 * @gamma_size: size of the gamma table 183 * 184 * Drivers which support gamma tables should set this to the supported gamma 185 * table size when initializing the CRTC. Currently the drm core only supports a 186 * fixed gamma table size. 187 * 188 * Returns: 189 * Zero on success, negative errno on failure. 190 */ 191 int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, 192 int gamma_size) 193 { 194 uint16_t *r_base, *g_base, *b_base; 195 int i; 196 197 crtc->gamma_size = gamma_size; 198 199 crtc->gamma_store = kcalloc(gamma_size, sizeof(uint16_t) * 3, 200 GFP_KERNEL); 201 if (!crtc->gamma_store) { 202 crtc->gamma_size = 0; 203 return -ENOMEM; 204 } 205 206 r_base = crtc->gamma_store; 207 g_base = r_base + gamma_size; 208 b_base = g_base + gamma_size; 209 for (i = 0; i < gamma_size; i++) { 210 r_base[i] = i << 8; 211 g_base[i] = i << 8; 212 b_base[i] = i << 8; 213 } 214 215 216 return 0; 217 } 218 EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size); 219 220 /** 221 * drm_mode_gamma_set_ioctl - set the gamma table 222 * @dev: DRM device 223 * @data: ioctl data 224 * @file_priv: DRM file info 225 * 226 * Set the gamma table of a CRTC to the one passed in by the user. Userspace can 227 * inquire the required gamma table size through drm_mode_gamma_get_ioctl. 228 * 229 * Called by the user via ioctl. 230 * 231 * Returns: 232 * Zero on success, negative errno on failure. 233 */ 234 int drm_mode_gamma_set_ioctl(struct drm_device *dev, 235 void *data, struct drm_file *file_priv) 236 { 237 struct drm_mode_crtc_lut *crtc_lut = data; 238 struct drm_crtc *crtc; 239 void *r_base, *g_base, *b_base; 240 int size; 241 struct drm_modeset_acquire_ctx ctx; 242 int ret = 0; 243 244 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 245 return -EINVAL; 246 247 crtc = drm_crtc_find(dev, file_priv, crtc_lut->crtc_id); 248 if (!crtc) 249 return -ENOENT; 250 251 if (crtc->funcs->gamma_set == NULL) 252 return -ENOSYS; 253 254 /* memcpy into gamma store */ 255 if (crtc_lut->gamma_size != crtc->gamma_size) 256 return -EINVAL; 257 258 drm_modeset_acquire_init(&ctx, 0); 259 retry: 260 ret = drm_modeset_lock_all_ctx(dev, &ctx); 261 if (ret) 262 goto out; 263 264 size = crtc_lut->gamma_size * (sizeof(uint16_t)); 265 r_base = crtc->gamma_store; 266 if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) { 267 ret = -EFAULT; 268 goto out; 269 } 270 271 g_base = r_base + size; 272 if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) { 273 ret = -EFAULT; 274 goto out; 275 } 276 277 b_base = g_base + size; 278 if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) { 279 ret = -EFAULT; 280 goto out; 281 } 282 283 ret = crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, 284 crtc->gamma_size, &ctx); 285 286 out: 287 if (ret == -EDEADLK) { 288 drm_modeset_backoff(&ctx); 289 goto retry; 290 } 291 drm_modeset_drop_locks(&ctx); 292 drm_modeset_acquire_fini(&ctx); 293 294 return ret; 295 296 } 297 298 /** 299 * drm_mode_gamma_get_ioctl - get the gamma table 300 * @dev: DRM device 301 * @data: ioctl data 302 * @file_priv: DRM file info 303 * 304 * Copy the current gamma table into the storage provided. This also provides 305 * the gamma table size the driver expects, which can be used to size the 306 * allocated storage. 307 * 308 * Called by the user via ioctl. 309 * 310 * Returns: 311 * Zero on success, negative errno on failure. 312 */ 313 int drm_mode_gamma_get_ioctl(struct drm_device *dev, 314 void *data, struct drm_file *file_priv) 315 { 316 struct drm_mode_crtc_lut *crtc_lut = data; 317 struct drm_crtc *crtc; 318 void *r_base, *g_base, *b_base; 319 int size; 320 int ret = 0; 321 322 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 323 return -EINVAL; 324 325 crtc = drm_crtc_find(dev, file_priv, crtc_lut->crtc_id); 326 if (!crtc) 327 return -ENOENT; 328 329 /* memcpy into gamma store */ 330 if (crtc_lut->gamma_size != crtc->gamma_size) 331 return -EINVAL; 332 333 drm_modeset_lock(&crtc->mutex, NULL); 334 size = crtc_lut->gamma_size * (sizeof(uint16_t)); 335 r_base = crtc->gamma_store; 336 if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) { 337 ret = -EFAULT; 338 goto out; 339 } 340 341 g_base = r_base + size; 342 if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) { 343 ret = -EFAULT; 344 goto out; 345 } 346 347 b_base = g_base + size; 348 if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) { 349 ret = -EFAULT; 350 goto out; 351 } 352 out: 353 drm_modeset_unlock(&crtc->mutex); 354 return ret; 355 } 356 357 static const char * const color_encoding_name[] = { 358 [DRM_COLOR_YCBCR_BT601] = "ITU-R BT.601 YCbCr", 359 [DRM_COLOR_YCBCR_BT709] = "ITU-R BT.709 YCbCr", 360 [DRM_COLOR_YCBCR_BT2020] = "ITU-R BT.2020 YCbCr", 361 }; 362 363 static const char * const color_range_name[] = { 364 [DRM_COLOR_YCBCR_FULL_RANGE] = "YCbCr full range", 365 [DRM_COLOR_YCBCR_LIMITED_RANGE] = "YCbCr limited range", 366 }; 367 368 /** 369 * drm_get_color_encoding_name - return a string for color encoding 370 * @encoding: color encoding to compute name of 371 * 372 * In contrast to the other drm_get_*_name functions this one here returns a 373 * const pointer and hence is threadsafe. 374 */ 375 const char *drm_get_color_encoding_name(enum drm_color_encoding encoding) 376 { 377 if (WARN_ON(encoding >= ARRAY_SIZE(color_encoding_name))) 378 return "unknown"; 379 380 return color_encoding_name[encoding]; 381 } 382 383 /** 384 * drm_get_color_range_name - return a string for color range 385 * @range: color range to compute name of 386 * 387 * In contrast to the other drm_get_*_name functions this one here returns a 388 * const pointer and hence is threadsafe. 389 */ 390 const char *drm_get_color_range_name(enum drm_color_range range) 391 { 392 if (WARN_ON(range >= ARRAY_SIZE(color_range_name))) 393 return "unknown"; 394 395 return color_range_name[range]; 396 } 397 398 /** 399 * drm_plane_create_color_properties - color encoding related plane properties 400 * @plane: plane object 401 * @supported_encodings: bitfield indicating supported color encodings 402 * @supported_ranges: bitfileld indicating supported color ranges 403 * @default_encoding: default color encoding 404 * @default_range: default color range 405 * 406 * Create and attach plane specific COLOR_ENCODING and COLOR_RANGE 407 * properties to @plane. The supported encodings and ranges should 408 * be provided in supported_encodings and supported_ranges bitmasks. 409 * Each bit set in the bitmask indicates that its number as enum 410 * value is supported. 411 */ 412 int drm_plane_create_color_properties(struct drm_plane *plane, 413 u32 supported_encodings, 414 u32 supported_ranges, 415 enum drm_color_encoding default_encoding, 416 enum drm_color_range default_range) 417 { 418 struct drm_device *dev = plane->dev; 419 struct drm_property *prop; 420 struct drm_prop_enum_list enum_list[max_t(int, DRM_COLOR_ENCODING_MAX, 421 DRM_COLOR_RANGE_MAX)]; 422 int i, len; 423 424 if (WARN_ON(supported_encodings == 0 || 425 (supported_encodings & -BIT(DRM_COLOR_ENCODING_MAX)) != 0 || 426 (supported_encodings & BIT(default_encoding)) == 0)) 427 return -EINVAL; 428 429 if (WARN_ON(supported_ranges == 0 || 430 (supported_ranges & -BIT(DRM_COLOR_RANGE_MAX)) != 0 || 431 (supported_ranges & BIT(default_range)) == 0)) 432 return -EINVAL; 433 434 len = 0; 435 for (i = 0; i < DRM_COLOR_ENCODING_MAX; i++) { 436 if ((supported_encodings & BIT(i)) == 0) 437 continue; 438 439 enum_list[len].type = i; 440 enum_list[len].name = color_encoding_name[i]; 441 len++; 442 } 443 444 prop = drm_property_create_enum(dev, 0, "COLOR_ENCODING", 445 enum_list, len); 446 if (!prop) 447 return -ENOMEM; 448 plane->color_encoding_property = prop; 449 drm_object_attach_property(&plane->base, prop, default_encoding); 450 if (plane->state) 451 plane->state->color_encoding = default_encoding; 452 453 len = 0; 454 for (i = 0; i < DRM_COLOR_RANGE_MAX; i++) { 455 if ((supported_ranges & BIT(i)) == 0) 456 continue; 457 458 enum_list[len].type = i; 459 enum_list[len].name = color_range_name[i]; 460 len++; 461 } 462 463 prop = drm_property_create_enum(dev, 0, "COLOR_RANGE", 464 enum_list, len); 465 if (!prop) 466 return -ENOMEM; 467 plane->color_range_property = prop; 468 drm_object_attach_property(&plane->base, prop, default_range); 469 if (plane->state) 470 plane->state->color_range = default_range; 471 472 return 0; 473 } 474 EXPORT_SYMBOL(drm_plane_create_color_properties); 475