xref: /openbmc/linux/drivers/gpu/drm/drm_aperture.c (revision e142bd91)
1 // SPDX-License-Identifier: MIT
2 
3 #include <linux/device.h>
4 #include <linux/fb.h>
5 #include <linux/list.h>
6 #include <linux/mutex.h>
7 #include <linux/pci.h>
8 #include <linux/platform_device.h> /* for firmware helpers */
9 #include <linux/slab.h>
10 #include <linux/types.h>
11 #include <linux/vgaarb.h>
12 
13 #include <drm/drm_aperture.h>
14 #include <drm/drm_drv.h>
15 #include <drm/drm_print.h>
16 
17 /**
18  * DOC: overview
19  *
20  * A graphics device might be supported by different drivers, but only one
21  * driver can be active at any given time. Many systems load a generic
22  * graphics drivers, such as EFI-GOP or VESA, early during the boot process.
23  * During later boot stages, they replace the generic driver with a dedicated,
24  * hardware-specific driver. To take over the device the dedicated driver
25  * first has to remove the generic driver. DRM aperture functions manage
26  * ownership of DRM framebuffer memory and hand-over between drivers.
27  *
28  * DRM drivers should call drm_aperture_remove_conflicting_framebuffers()
29  * at the top of their probe function. The function removes any generic
30  * driver that is currently associated with the given framebuffer memory.
31  * If the framebuffer is located at PCI BAR 0, the rsp code looks as in the
32  * example given below.
33  *
34  * .. code-block:: c
35  *
36  *	static const struct drm_driver example_driver = {
37  *		...
38  *	};
39  *
40  *	static int remove_conflicting_framebuffers(struct pci_dev *pdev)
41  *	{
42  *		bool primary = false;
43  *		resource_size_t base, size;
44  *		int ret;
45  *
46  *		base = pci_resource_start(pdev, 0);
47  *		size = pci_resource_len(pdev, 0);
48  *	#ifdef CONFIG_X86
49  *		primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
50  *	#endif
51  *
52  *		return drm_aperture_remove_conflicting_framebuffers(base, size, primary,
53  *		                                                    &example_driver);
54  *	}
55  *
56  *	static int probe(struct pci_dev *pdev)
57  *	{
58  *		int ret;
59  *
60  *		// Remove any generic drivers...
61  *		ret = remove_conflicting_framebuffers(pdev);
62  *		if (ret)
63  *			return ret;
64  *
65  *		// ... and initialize the hardware.
66  *		...
67  *
68  *		drm_dev_register();
69  *
70  *		return 0;
71  *	}
72  *
73  * PCI device drivers should call
74  * drm_aperture_remove_conflicting_pci_framebuffers() and let it detect the
75  * framebuffer apertures automatically. Device drivers without knowledge of
76  * the framebuffer's location shall call drm_aperture_remove_framebuffers(),
77  * which removes all drivers for known framebuffer.
78  *
79  * Drivers that are susceptible to being removed by other drivers, such as
80  * generic EFI or VESA drivers, have to register themselves as owners of their
81  * given framebuffer memory. Ownership of the framebuffer memory is achieved
82  * by calling devm_aperture_acquire_from_firmware(). On success, the driver
83  * is the owner of the framebuffer range. The function fails if the
84  * framebuffer is already by another driver. See below for an example.
85  *
86  * .. code-block:: c
87  *
88  *	static int acquire_framebuffers(struct drm_device *dev, struct platform_device *pdev)
89  *	{
90  *		resource_size_t base, size;
91  *
92  *		mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
93  *		if (!mem)
94  *			return -EINVAL;
95  *		base = mem->start;
96  *		size = resource_size(mem);
97  *
98  *		return devm_acquire_aperture_from_firmware(dev, base, size);
99  *	}
100  *
101  *	static int probe(struct platform_device *pdev)
102  *	{
103  *		struct drm_device *dev;
104  *		int ret;
105  *
106  *		// ... Initialize the device...
107  *		dev = devm_drm_dev_alloc();
108  *		...
109  *
110  *		// ... and acquire ownership of the framebuffer.
111  *		ret = acquire_framebuffers(dev, pdev);
112  *		if (ret)
113  *			return ret;
114  *
115  *		drm_dev_register(dev, 0);
116  *
117  *		return 0;
118  *	}
119  *
120  * The generic driver is now subject to forced removal by other drivers. This
121  * only works for platform drivers that support hot unplug.
122  * When a driver calls drm_aperture_remove_conflicting_framebuffers() et al
123  * for the registered framebuffer range, the aperture helpers call
124  * platform_device_unregister() and the generic driver unloads itself. It
125  * may not access the device's registers, framebuffer memory, ROM, etc
126  * afterwards.
127  */
128 
129 struct drm_aperture {
130 	struct drm_device *dev;
131 	resource_size_t base;
132 	resource_size_t size;
133 	struct list_head lh;
134 	void (*detach)(struct drm_device *dev);
135 };
136 
137 static LIST_HEAD(drm_apertures);
138 static DEFINE_MUTEX(drm_apertures_lock);
139 
140 static bool overlap(resource_size_t base1, resource_size_t end1,
141 		    resource_size_t base2, resource_size_t end2)
142 {
143 	return (base1 < end2) && (end1 > base2);
144 }
145 
146 static void devm_aperture_acquire_release(void *data)
147 {
148 	struct drm_aperture *ap = data;
149 	bool detached = !ap->dev;
150 
151 	if (detached)
152 		return;
153 
154 	mutex_lock(&drm_apertures_lock);
155 	list_del(&ap->lh);
156 	mutex_unlock(&drm_apertures_lock);
157 }
158 
159 static int devm_aperture_acquire(struct drm_device *dev,
160 				 resource_size_t base, resource_size_t size,
161 				 void (*detach)(struct drm_device *))
162 {
163 	size_t end = base + size;
164 	struct list_head *pos;
165 	struct drm_aperture *ap;
166 
167 	mutex_lock(&drm_apertures_lock);
168 
169 	list_for_each(pos, &drm_apertures) {
170 		ap = container_of(pos, struct drm_aperture, lh);
171 		if (overlap(base, end, ap->base, ap->base + ap->size)) {
172 			mutex_unlock(&drm_apertures_lock);
173 			return -EBUSY;
174 		}
175 	}
176 
177 	ap = devm_kzalloc(dev->dev, sizeof(*ap), GFP_KERNEL);
178 	if (!ap) {
179 		mutex_unlock(&drm_apertures_lock);
180 		return -ENOMEM;
181 	}
182 
183 	ap->dev = dev;
184 	ap->base = base;
185 	ap->size = size;
186 	ap->detach = detach;
187 	INIT_LIST_HEAD(&ap->lh);
188 
189 	list_add(&ap->lh, &drm_apertures);
190 
191 	mutex_unlock(&drm_apertures_lock);
192 
193 	return devm_add_action_or_reset(dev->dev, devm_aperture_acquire_release, ap);
194 }
195 
196 static void drm_aperture_detach_firmware(struct drm_device *dev)
197 {
198 	struct platform_device *pdev = to_platform_device(dev->dev);
199 
200 	/*
201 	 * Remove the device from the device hierarchy. This is the right thing
202 	 * to do for firmware-based DRM drivers, such as EFI, VESA or VGA. After
203 	 * the new driver takes over the hardware, the firmware device's state
204 	 * will be lost.
205 	 *
206 	 * For non-platform devices, a new callback would be required.
207 	 *
208 	 * If the aperture helpers ever need to handle native drivers, this call
209 	 * would only have to unplug the DRM device, so that the hardware device
210 	 * stays around after detachment.
211 	 */
212 	platform_device_unregister(pdev);
213 }
214 
215 /**
216  * devm_aperture_acquire_from_firmware - Acquires ownership of a firmware framebuffer
217  *                                       on behalf of a DRM driver.
218  * @dev:	the DRM device to own the framebuffer memory
219  * @base:	the framebuffer's byte offset in physical memory
220  * @size:	the framebuffer size in bytes
221  *
222  * Installs the given device as the new owner of the framebuffer. The function
223  * expects the framebuffer to be provided by a platform device that has been
224  * set up by firmware. Firmware can be any generic interface, such as EFI,
225  * VESA, VGA, etc. If the native hardware driver takes over ownership of the
226  * framebuffer range, the firmware state gets lost. Aperture helpers will then
227  * unregister the platform device automatically. Acquired apertures are
228  * released automatically if the underlying device goes away.
229  *
230  * The function fails if the framebuffer range, or parts of it, is currently
231  * owned by another driver. To evict current owners, callers should use
232  * drm_aperture_remove_conflicting_framebuffers() et al. before calling this
233  * function. The function also fails if the given device is not a platform
234  * device.
235  *
236  * Returns:
237  * 0 on success, or a negative errno value otherwise.
238  */
239 int devm_aperture_acquire_from_firmware(struct drm_device *dev, resource_size_t base,
240 					resource_size_t size)
241 {
242 	if (drm_WARN_ON(dev, !dev_is_platform(dev->dev)))
243 		return -EINVAL;
244 
245 	return devm_aperture_acquire(dev, base, size, drm_aperture_detach_firmware);
246 }
247 EXPORT_SYMBOL(devm_aperture_acquire_from_firmware);
248 
249 static void drm_aperture_detach_drivers(resource_size_t base, resource_size_t size)
250 {
251 	resource_size_t end = base + size;
252 	struct list_head *pos, *n;
253 
254 	mutex_lock(&drm_apertures_lock);
255 
256 	list_for_each_safe(pos, n, &drm_apertures) {
257 		struct drm_aperture *ap =
258 			container_of(pos, struct drm_aperture, lh);
259 		struct drm_device *dev = ap->dev;
260 
261 		if (WARN_ON_ONCE(!dev))
262 			continue;
263 
264 		if (!overlap(base, end, ap->base, ap->base + ap->size))
265 			continue;
266 
267 		ap->dev = NULL; /* detach from device */
268 		list_del(&ap->lh);
269 
270 		ap->detach(dev);
271 	}
272 
273 	mutex_unlock(&drm_apertures_lock);
274 }
275 
276 /**
277  * drm_aperture_remove_conflicting_framebuffers - remove existing framebuffers in the given range
278  * @base: the aperture's base address in physical memory
279  * @size: aperture size in bytes
280  * @primary: also kick vga16fb if present
281  * @req_driver: requesting DRM driver
282  *
283  * This function removes graphics device drivers which use memory range described by
284  * @base and @size.
285  *
286  * Returns:
287  * 0 on success, or a negative errno code otherwise
288  */
289 int drm_aperture_remove_conflicting_framebuffers(resource_size_t base, resource_size_t size,
290 						 bool primary, const struct drm_driver *req_driver)
291 {
292 #if IS_REACHABLE(CONFIG_FB)
293 	struct apertures_struct *a;
294 	int ret;
295 
296 	a = alloc_apertures(1);
297 	if (!a)
298 		return -ENOMEM;
299 
300 	a->ranges[0].base = base;
301 	a->ranges[0].size = size;
302 
303 	ret = remove_conflicting_framebuffers(a, req_driver->name, primary);
304 	kfree(a);
305 
306 	if (ret)
307 		return ret;
308 #endif
309 
310 	drm_aperture_detach_drivers(base, size);
311 
312 	return 0;
313 }
314 EXPORT_SYMBOL(drm_aperture_remove_conflicting_framebuffers);
315 
316 /**
317  * drm_aperture_remove_conflicting_pci_framebuffers - remove existing framebuffers for PCI devices
318  * @pdev: PCI device
319  * @req_driver: requesting DRM driver
320  *
321  * This function removes graphics device drivers using memory range configured
322  * for any of @pdev's memory bars. The function assumes that PCI device with
323  * shadowed ROM drives a primary display and so kicks out vga16fb.
324  *
325  * Returns:
326  * 0 on success, or a negative errno code otherwise
327  */
328 int drm_aperture_remove_conflicting_pci_framebuffers(struct pci_dev *pdev,
329 						     const struct drm_driver *req_driver)
330 {
331 	resource_size_t base, size;
332 	int bar, ret = 0;
333 
334 	for (bar = 0; bar < PCI_STD_NUM_BARS; ++bar) {
335 		if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
336 			continue;
337 		base = pci_resource_start(pdev, bar);
338 		size = pci_resource_len(pdev, bar);
339 		drm_aperture_detach_drivers(base, size);
340 	}
341 
342 	/*
343 	 * WARNING: Apparently we must kick fbdev drivers before vgacon,
344 	 * otherwise the vga fbdev driver falls over.
345 	 */
346 #if IS_REACHABLE(CONFIG_FB)
347 	ret = remove_conflicting_pci_framebuffers(pdev, req_driver->name);
348 #endif
349 	if (ret == 0)
350 		ret = vga_remove_vgacon(pdev);
351 	return ret;
352 }
353 EXPORT_SYMBOL(drm_aperture_remove_conflicting_pci_framebuffers);
354